| Age | Commit message (Collapse) | Author |
|---|
|
The function ata_eh_read_sense_success_ncq_log() does more that just
reading the sense data for successful NCQ commands log page as it also
sets the sense data for all commands listed in the log page.
Rename this function to ata_eh_get_ncq_success_sense() to better
describe what the function does. Furthermore, since this function is
only called from ata_eh_get_success_sense() in libata-eh.c, there is no
need to export it and its declaration can be moved to
drivers/ata/libata.h.
To be consistent with this change, the function
ata_eh_read_sense_success_non_ncq() is also renamed to
ata_eh_get_non_ncq_success_sense().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Unlike ata_std_prereset() and ata_std_postreset(), the function
sata_std_hardreset() applies only to SATA devices, as its name implies.
So move its definition to libata-sata.c.
Together with this, also move the definition of sata_port_ops to
libata-sata.c, where it belongs.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Move the definition of the function sata_down_spd_limit() to
libata-sata.c where it belongs, together with sata_set_spd().
The helper function ata_sstatus_online() is also changed to be an
inline function defined in drivers/ata/libata.h.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
The function __ata_qc_complete() is always called with a qc that already
has been dereferenced and so is guaranteed to be non-NULL (as otherwise
the kernel would have crashed). So remove the warning for a NULL qc as
it is useless.
Furthermore, the qc passed to __ata_qc_complete() must always be marked
as active with the ATA_QCFLAG_ACTIVE flag. If that is not the case, in
addition to the existing warning, return early so that we do not attempt
to complete an invalid qc.
Finally, fix the comment related to clearing the qc active flag as that
operation applies to all devices, not just ATAPI ones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
A struct ata_device flags should always be set and cleared with the
device port locked. Testing for a flag should thus also be done while
holding the device port lock. In accordance to this principle, modify
ata_scsi_handle_link_detach() to test and clear the ATA_DFLAG_DETACHED
flag while holding the device port lock.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Move the ATA link transport device related functions after the ATA
transport device related functions to avoid the need for forward
declaring ata_tdev_add() and ata_tdev_delete().
And while at it, do the following:
1) Change ata_is_ata_dev() and ata_is_link() to return a boolean
2) Fix a pointer declaration style in ata_is_ata_dev()
3) Improve the kdoc comments for ata_tdev_free(), ata_tdev_delete(),
ata_tdev_add(), ata_tlink_delete() and ata_tlink_add()
No functional changes are introduced by this cleanup.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Every time I see libata code calling scsi_check_sense(), I get confused
why the code path that is working fine for SCSI code, is not sufficient
for libata code.
The reason is that SCSI usually gets the sense data as part of the
completion, and will thus automatically call scsi_check_sense(), which
will set the SCSI ML byte (if any).
However, for libata queued commands, we always need to fetch the sense
data via SCSI EH, and thus do not get the luxury of having
scsi_check_sense() called automatically.
Add a new helper, ata_eh_decide_disposition(), that has a ata_eh_ prefix
to more clearly highlight that this is only needed for code called by EH,
while also having a similar name to scsi_decide_disposition(), such that
it is easier to compare the libata code with the equivalent SCSI code.
Also add a big kdoc comment explaining why this helper is called/needed in
the first place.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The function ata_schedule_scsi_eh() was removed with commit
f8bbfc247efb ("[PATCH] SCSI: make scsi_implement_eh() generic API for
SCSI transports"), and the function ata_sff_irq_clear() was removed
with commit 37f65b8bc262("libata-sff: ata_sff_irq_clear() is BMDMA
specific").
Remove the now useless declarations of these functions in
drivers/ata/libata.h and include/linux/libata.h.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Return a negative error code if devm_clk_get() fails. Don't return
success.
Fixes: 3156e1b2c071 ("ata: ahci_imx: AHB clock rate setting is not required on i.MX8QM AHCI SATA")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cbcbdfc2-ddc7-4684-8ad4-018227823546@stanley.mountain
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
for_each_child_of_node_scoped() can put the device_node automatically.
So let's use it to make the code simpler by avoiding the need to
explicitly call of_node_put().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240810023426.110624-1-zhangzekun11@huawei.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Correct the email address of driver author.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-6-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
The RXWM(RxWaterMark) sets the minimum number of free location within
the RX FIFO before the watermark is exceeded which in turn will cause
the Transport Layer to instruct the Link Layer to transmit HOLDS to the
transmitting end.
Based on the default RXWM value 0x20, RX FIFO overflow might be observed
on i.MX8QM MEK board, when some Gen3 SATA disks are used.
The FIFO overflow will result in CRC error, internal error and protocol
error, then the SATA link is not stable anymore.
To fix this issue, enlarge RX water mark setting from 0x20 to 0x29.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-5-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
i.MX8QM AHCI SATA doesn't need set AHB clock rate to config the vendor
specified TIMER1MS register.
Set AHB clock rate only for i.MX53 and i.MX6Q.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-4-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Clean up code by using PHY interface provided by the PHY driver under
PHY subsystem(drivers/phy/freescale/phy-fsl-imx8qm-hsio.c).
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
In ata_dev_print_quirks(), return early if ata_dev_print_info() returns
false or if we already printed quirk information. This is to avoid
printing a device quirks multiple times (that is, each time
ata_dev_revalidate() is called).
To remember if ata_dev_print_quirks() was already executed, define the
EH context flag ATA_EHI_DID_PRINT_QUIRKS and set this flag in
ata_dev_print_quirks().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 58157d607aec ("ata: libata: Print quirks applied to devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The function ata_noop_qc_prep(), as its name implies, does nothing and
simply returns AC_ERR_OK. For drivers that do not need any special
preparations of queued commands, we can avoid having to define struct
ata_port qc_prep operation by simply testing if that operation is
defined or not in ata_qc_issue(). Make this change and remove
ata_noop_qc_prep().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
|
|
Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Remove the use of the term "blacklist". What the comment using that term
refers to does not seem to exist at all anyway as the driver does not
have such list but rather only a list of compatible controllers.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Remove the comment using the term "blacklist" from piix_init_sidpr().
That comment is useless given that the function piix_no_sidpr() name is
clear about what is being checked.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Rename the array sil_blacklist to sil_quirks as this name is more
neutral and is also consistent with how this driver define quirks with
the SIL_QUIRK_XXX flags.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Rephrase the comment for the eMachines entry in the sysids array of
ahci_broken_suspend() to not use the term blacklist.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Let's not use the term blacklist in the function
serverworks_osb4_filter() documentation comment and rather simply refer
to what that function looks at: the list of devices with groken UDMA5.
While at it, also constify the values of the csb_bad_ata100 array.
Of note is that all of this should probably be handled using libata
quirk mechanism but it is unclear if these UDMA5 quirks are specific
to this controller only.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Introduce the function ata_dev_print_quirks() to print the quirk flags
that will be applied to a scanned device. This new function is called
from ata_dev_quirks() when a match on a device model or device model
and revision is found for a device in the __ata_dev_quirks array.
To implement this function, the ATA_QUIRK_ flags are redefined using
the new enum ata_quirk which defines the bit shift for each quirk
flag. The array of strings ata_quirk_names is used to define the name
of each flag, which are printed by ata_dev_print_quirks().
Example output for a device listed in the __ata_dev_quirks array and
which has the ATA_QUIRK_DISABLE flag applied:
[10193.461270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10193.469190] ata1.00: Model 'ASMT109x- Config', rev '2143 5', applying quirks: disable
[10193.469195] ata1.00: unsupported device, disabling
[10193.481564] ata1.00: disable device
enum ata_quirk also defines the __ATA_QUIRK_MAX value as one plus the
last quirk flag defined. This value is used in ata_dev_quirks() to add a
build time check that all quirk flags fit within the unsigned int
(32-bits) quirks field of struct ata_device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
According to Wiktionary, the verb "hork" is computing slang defined as
"To foul up; to be occupied with difficulty, tangle, or unpleasantness;
to be broken" (https://en.wiktionary.org/wiki/hork#Verb). libata uses
this with the term "horkage" to refer to broken device features. Given
that this term is not widely used and its meaning unknown to many,
rename it to the more commonly used term "quirk", similar to many other
places in the kernel.
The renaming done is:
1) Rename all ATA_HORKAGE_XXX flags to ATA_QUIRK_XXX
2) Rename struct ata_device horkage field to quirks
3) Rename struct ata_blacklist_entry to struct ata_dev_quirks_entry. The
array of these structures defining quirks for known devices is
renamed __ata_dev_quirks.
4) The functions ata_dev_blacklisted() and ata_force_horkage() are
renamed to ata_dev_quirks() and ata_force_quirks() respectively.
5) All the force_horkage_xxx() macros are renamed to force_quirk_xxx()
And while at it, make sure that the type "unsigned int" is used
consistantly for quirk flags variables and data structure fields.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Rename the function ata_dma_blacklisted() to ata_dev_nodma() as this new
name is more neutral. The function signature is also changed to return a
boolean instead of an int.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Change the function ata_dev_knobble() to return a boolean instead of a
u8.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
|
|
Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.
Cc: Ben Hutchings <bwh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- don't use sprintf() with non-constant format string
* tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: avoid non-constant format string
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Will Deacon:
"We're still resolving a regression with the handling of unexpected
page faults on SMMUv3, but we're not quite there with a fix yet.
- Fix NULL dereference when freeing domain in Unisoc SPRD driver
- Separate assignment statements with semicolons in AMD page-table
code
- Fix Tegra erratum workaround when the CPU is using 16KiB pages"
* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
iommu/amd: Convert comma to semicolon
iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which
came along with it since it's still the merge window and clearly had a
bunch of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV"
* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: add correct compatible for Rohm BH2228FV
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
spi: microchip-core: add support for word sizes of 1 to 32 bits
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
spi: microchip-core: fix init function not setting the master and motorola modes
spi: microchip-core: only disable SPI controller when register value change requires it
spi: microchip-core: defer asserting chip select until just before write to TX FIFO
spi: microchip-core: fix the issues in the isr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"These two commits clean up the excessively loose dependencies for the
RZG2L USB VBCTRL regulator driver, ensuring it shouldn't prompt for
people who can't use it"
* tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Further restrict RZG2L USB VBCTRL regulator dependencies
regulator: renesas-usb-vbus-regulator: Update the default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Arnd sent a workaround for a false positive warning which was showing
up with GCC 14.1"
* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: work around gcc-14.1 false-positive warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for the merge window to fix the build and boot
on some SoCs.
- Initialize struct clk_init_data in the TI da8xx-cfgchip driver so
that stack contents aren't used for things like clk flags leading
to unexpected behavior
- Don't leak stack contents in a debug print in the new Sophgo clk
driver
- Disable the new T-Head clk driver on 32-bit targets to fix the
build due to a division
- Fix Samsung Exynos4 fin_pll wreckage from the clkdev rework done
last cycle by using a struct clk_hw directly instead of a struct
clk consumer"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: fix getting Exynos4 fin_pll rate from external clocks
clk: T-Head: Disable on 32-bit Targets
clk: sophgo: clk-sg2042-pll: Fix uninitialized variable in debug output
clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there are new features for the Designware controller and
fixes for the other IPs:
- dw: optional apb clock and power management support, IBI handling
fixes
- mipi-i3c-hci: IBI handling fixes
- svc: a few fixes"
* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
dt-bindings: i3c: add header for generic I3C flags
i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
i3c: dw: Add power management support
i3c: dw: Add some functions for reusability
i3c: dw: Save timing registers and other values
i3c: master: svc: Improve DAA STOP handle code logic
i3c: dw: Add optional apb clock
i3c: dw: Use new *_enabled clk API
dt-bindings: i3c: dw: Add apb clock binding
i3c: master: svc: Convert comma to semicolon
i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
i3c: dw: Remove ibi_capable property
i3c: dw: Fix IBI intr programming
i3c: dw: Fix clearing queue thld
i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
i3c: master: svc: resend target address when get NACK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Prevent the thermal core from flooding the kernel log with useless
messages if thermal zone temperature can never be determined (or its
sensor has failed permanently) and make it finally give up and disable
defective thermal zones (Rafael Wysocki)"
* tag 'thermal-6.11-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Back off when polling thermal zones on errors
thermal: trip: Split thermal_zone_device_set_mode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull auxdisplay updates from Geert Uytterhoeven:
- add support for configuring the boot message on line displays
- miscellaneous fixes and improvements
* tag 'auxdisplay-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
auxdisplay: ht16k33: Drop reference after LED registration
auxdisplay: Use sizeof(*pointer) instead of sizeof(type)
auxdisplay: hd44780: add missing MODULE_DESCRIPTION() macro
auxdisplay: linedisp: add missing MODULE_DESCRIPTION() macro
auxdisplay: linedisp: Support configuring the boot message
auxdisplay: charlcd: Provide a forward declaration
|
|
Pull drm fixes from Dave Airlie:
"Fixes for rc1, mostly amdgpu, i915 and xe, with some other misc ones,
doesn't seem to be anything too serious.
amdgpu:
- Bump driver version for GFX12 DCC
- DC documention warning fixes
- VCN unified queue power fix
- SMU fix
- RAS fix
- Display corruption fix
- SDMA 5.2 workaround
- GFX12 fixes
- Uninitialized variable fix
- VCN/JPEG 4.0.3 fixes
- Misc display fixes
- RAS fixes
- VCN4/5 harvest fix
- GPU reset fix
i915:
- Reset intel_dp->link_trained before retraining the link
- Don't switch the LTTPR mode on an active link
- Do not consider preemption during execlists_dequeue for gen8
- Allow NULL memory region
xe:
- xe_exec ioctl minor fix on sync entry cleanup upon error
- SRIOV: limit VF LMEM provisioning
- Wedge mode fixes
v3d:
- fix indirect dispatch on newer v3d revs
panel:
- fix panel backlight bindings"
* tag 'drm-next-2024-07-26' of https://gitlab.freedesktop.org/drm/kernel: (39 commits)
drm/amdgpu: reset vm state machine after gpu reset(vram lost)
drm/amdgpu: add missed harvest check for VCN IP v4/v5
drm/amdgpu: Fix eeprom max record count
drm/amdgpu: fix ras UE error injection failure issue
drm/amd/display: Remove ASSERT if significance is zero in math_ceil2
drm/amd/display: Check for NULL pointer
drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VF
drm/amdgpu: Add empty HDP flush function to VCN v4.0.3
drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3
drm/amd/amdgpu: Fix uninitialized variable warnings
drm/amdgpu: Fix atomics on GFX12
drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell
drm/i915: Allow NULL memory region
drm/i915/gt: Do not consider preemption during execlists_dequeue for gen8
dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
drm/xe: Don't suspend device upon wedge
drm/xe: Wedge the entire device
drm/xe/pf: Limit fair VF LMEM provisioning
drm/xe/exec: Fix minor bug related to xe_sync_entry_cleanup
drm/amd/display: fix corruption with high refresh rates on DCN 3.0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix KMSAN build breakage caused by the conflict between s390 and
mm-stable trees
- Add KMSAN page markers for ptdump
- Add runtime constant support
- Fix __pa/__va for modules under non-GPL licenses by exporting
necessary vm_layout struct with EXPORT_SYMBOL to prevent linkage
problems
- Fix an endless loop in the CF_DIAG event stop in the CPU Measurement
Counter Facility code when the counter set size is zero
- Remove the PROTECTED_VIRTUALIZATION_GUEST config option and enable
its functionality by default
- Support allocation of multiple MSI interrupts per device and improve
logging of architecture-specific limitations
- Add support for lowcore relocation as a debugging feature to catch
all null ptr dereferences in the kernel address space, improving
detection beyond the current implementation's limited write access
protection
- Clean up and rework CPU alternatives to allow for callbacks and early
patching for the lowcore relocation
* tag 's390-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390: Remove protvirt and kvm config guards for uv code
s390/boot: Add cmdline option to relocate lowcore
s390/kdump: Make kdump ready for lowcore relocation
s390/entry: Make system_call() ready for lowcore relocation
s390/entry: Make ret_from_fork() ready for lowcore relocation
s390/entry: Make __switch_to() ready for lowcore relocation
s390/entry: Make restart_int_handler() ready for lowcore relocation
s390/entry: Make mchk_int_handler() ready for lowcore relocation
s390/entry: Make int handlers ready for lowcore relocation
s390/entry: Make pgm_check_handler() ready for lowcore relocation
s390/entry: Add base register to CHECK_VMAP_STACK/CHECK_STACK macro
s390/entry: Add base register to SIEEXIT macro
s390/entry: Add base register to MBEAR macro
s390/entry: Make __sie64a() ready for lowcore relocation
s390/head64: Make startup code ready for lowcore relocation
s390: Add infrastructure to patch lowcore accesses
s390/atomic_ops: Disable flag outputs constraint for GCC versions below 14.2.0
s390/entry: Move SIE indicator flag to thread info
s390/nmi: Simplify ptregs setup
s390/alternatives: Remove alternative facility list
...
|
|
Pull ceph updates from Ilya Dryomov:
"A small patchset to address bogus I/O errors and ultimately an
assertion failure in the face of watch errors with -o exclusive
mappings in RBD marked for stable and some assorted CephFS fixes"
* tag 'ceph-for-6.11-rc1' of https://github.com/ceph/ceph-client:
rbd: don't assume rbd_is_lock_owner() for exclusive mappings
rbd: don't assume RBD_LOCK_STATE_LOCKED for exclusive mappings
rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait
ceph: fix incorrect kmalloc size of pagevec mempool
ceph: periodically flush the cap releases
ceph: convert comma to semicolon in __ceph_dentry_dir_lease_touch()
ceph: use cap_wait_list only if debugfs is enabled
|
