summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-02-17dm-integrity: Do not emit journal configuration in DM table for Inline modeMilan Broz
The Inline mode does not use a journal; it makes no sense to print journal information in DM table. Print it only if the journal is used. The same applies to interleave_sectors (unused for Inline mode). Also, add comments for arg_count, as the current calculation is quite obscure. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-02-17dm-integrity: Avoid divide by zero in table status in Inline modeMilan Broz
In Inline mode, the journal is unused, and journal_sectors is zero. Calculating the journal watermark requires dividing by journal_sectors, which should be done only if the journal is configured. Otherwise, a simple table query (dmsetup table) can cause OOPS. This bug did not show on some systems, perhaps only due to compiler optimization. On my 32-bit testing machine, this reliably crashes with the following: : Oops: divide error: 0000 [#1] PREEMPT SMP : CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959 : EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity] ... Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: fb0987682c62 ("dm-integrity: introduce the Inline mode") Cc: stable@vger.kernel.org # 6.11+
2025-02-16spi: atmel-quadspi: remove references to runtime PM on error pathClaudiu Beznea
There is no need to call runtime PM put APIs on error path of `atmel_qspi_sama7g5_transfer()` as the caller (`atmel_qspi_exec_op()`) of it will take care of this if needed. Fixes: 5af42209a4d2 ("spi: atmel-quadspi: Add support for sama7g5 QSPI") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com> Reported-by: Alexander Dahl <ada@thorsis.com> Closes: https://lore.kernel.org/linux-spi/20250109-carat-festivity-5f088e1add3c@thorsis.com/ [ csokas.bence: Rebase and clarify msg, fix/add tags ] Signed-off-by: Bence Csókás <csokas.bence@prolan.hu> Link: https://patch.msgid.link/20250207122145.162183-2-csokas.bence@prolan.hu Signed-off-by: Mark Brown <broonie@kernel.org>
2025-02-16Merge tag 'driver-core-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core api addition from Greg KH: "Here is a driver core new api for 6.14-rc3 that is being added to allow platform devices from stop being abused. It adds a new 'faux_device' structure and bus and api to allow almost a straight or simpler conversion from platform devices that were not really a platform device. It also comes with a binding for rust, with an example driver in rust showing how it's used. I'm adding this now so that the patches that convert the different drivers and subsystems can all start flowing into linux-next now through their different development trees, in time for 6.15-rc1. We have a number that are already reviewed and tested, but adding those conversions now doesn't seem right. For now, no one is using this, and it passes all build tests from 0-day and linux-next, so all should be good" * tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: rust/kernel: Add faux device bindings driver core: add a faux bus for use when a simple device/bus is needed
2025-02-16Merge tag 'tty-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for some reported problems. Nothing major, just: - sc16is7xx irq check fix - 8250 fifo underflow fix - serial_port and 8250 iotype fixes Most of these have been in linux-next already, and all have passed 0-day testing" * tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: Fix fifo underflow on flush serial: 8250_pnp: Remove unneeded ->iotype assignment serial: 8250_platform: Remove unneeded ->iotype assignment serial: 8250_of: Remove unneeded ->iotype assignment serial: port: Make ->iotype validation global in __uart_read_properties() serial: port: Always update ->iotype in __uart_read_properties() serial: port: Assign ->iotype correctly when ->iobase is set serial: sc16is7xx: Fix IRQ number check behavior
2025-02-16Merge tag 'usb-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes, and new device ids, for 6.14-rc3. Lots of tiny stuff for reported problems, including: - new device ids and quirks - usb hub crash fix found by syzbot - dwc2 driver fix - dwc3 driver fixes - uvc gadget driver fix - cdc-acm driver fixes for a variety of different issues - other tiny bugfixes Almost all of these have been in linux-next this week, and all have passed 0-day testing" * tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY usb: roles: set switch registered flag early on usb: gadget: uvc: Fix unstarted kthread worker USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist usb: gadget: core: flush gadget workqueue after device removal USB: gadget: f_midi: f_midi_complete to call queue_work usb: core: fix pipe creation for get_bMaxPacketSize0 usb: dwc3: Fix timeout issue during controller enter/exit from halt state USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk usb: cdc-acm: Fix handling of oversized fragments usb: cdc-acm: Check control transfer buffer size before access usb: xhci: Restore xhci_pci support for Renesas HCs USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828 usb: gadget: f_midi: fix MIDI Streaming descriptor lengths usb: dwc2: gadget: remove of_node reference upon udc_stop ...
2025-02-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Large set of fixes for vector handling, especially in the interactions between host and guest state. This fixes a number of bugs affecting actual deployments, and greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland for dealing with this thankless task. - Fix an ugly race between vcpu and vgic creation/init, resulting in unexpected behaviours - Fix use of kernel VAs at EL2 when emulating timers with nVHE - Small set of pKVM improvements and cleanups x86: - Fix broken SNP support with KVM module built-in, ensuring the PSP module is initialized before KVM even when the module infrastructure cannot be used to order initcalls - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1 - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) x86/sev: Fix broken SNP support with KVM module built-in KVM: SVM: Ensure PSP module is initialized if KVM module is built-in crypto: ccp: Add external API interface for PSP module initialization KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic() KVM: arm64: timer: Drop warning on failed interrupt signalling KVM: arm64: Fix alignment of kvm_hyp_memcache allocations KVM: arm64: Convert timer offset VA when accessed in HYP code KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp() KVM: arm64: Eagerly switch ZCR_EL{1,2} KVM: arm64: Mark some header functions as inline KVM: arm64: Refactor exit handlers KVM: arm64: Refactor CPTR trap deactivation KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN KVM: arm64: Remove host FPSIMD saving for non-protected KVM KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop KVM: nSVM: Enter guest mode before initializing nested NPT MMU KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper ...
2025-02-15Merge tag 'devicetree-fixes-for-6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom, and powertip,{st7272|hx8238a} displays - Fix compatible for TI am62a7 dss - Add a kunit test for __of_address_resource_bounds() * tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: display: Add powertip,{st7272|hx8238a} as DT Schema description dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible dt-bindings: display: ti: Fix compatible for am62a7 dss of: address: Add kunit test for __of_address_resource_bounds() dt-bindings: clock: qcom: Add QCS8300 video clock controller dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300 dt-bindings: clock: qcom: Add GPU clocks for QCS8300
2025-02-15drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk sourceKrzysztof Kozlowski
PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI clock divider, source of bitclk and two for enabling the DSI PHY PLL clocks. dsi_7nm_set_usecase() sets only the source of bitclk, so should leave all other bits untouched. Use newly introduced dsi_pll_cmn_clk_cfg1_update() to update respective bits without overwriting the rest. While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637380/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driverKrzysztof Kozlowski
PHY_CMN_CLK_CFG1 register is updated by the PHY driver and by a mux clock from Common Clock Framework: devm_clk_hw_register_mux_parent_hws(). There could be a path leading to concurrent and conflicting updates between PHY driver and clock framework, e.g. changing the mux and enabling PLL clocks. Add dedicated spinlock to be sure all PHY_CMN_CLK_CFG1 updates are synchronized. While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637378/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-2-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver sideKrzysztof Kozlowski
PHY_CMN_CLK_CFG0 register is updated by the PHY driver and by two divider clocks from Common Clock Framework: devm_clk_hw_register_divider_parent_hw(). Concurrent access by the clocks side is protected with spinlock, however driver's side in restoring state is not. Restoring state is called from msm_dsi_phy_enable(), so there could be a path leading to concurrent and conflicting updates with clock framework. Add missing lock usage on the PHY driver side, encapsulated in its own function so the code will be still readable. While shuffling the code, define and use PHY_CMN_CLK_CFG0 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637376/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-1-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()Jessica Zhang
Drop extra return at the end of dpu_crtc_reassign_planes() Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes") Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/631565/ Link: https://lore.kernel.org/r/20250108-virtual-planes-fixes-v1-2-420cb36df94a@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fieldsMarijn Suijten
What used to be the input_10_bits boolean - feeding into the lowest bit of DSC_ENC - on MSM downstream turned into an accidental OR with the full bits_per_component number when it was ported to the upstream kernel. On typical bpc=8 setups we don't notice this because line_buf_depth is always an odd value (it contains bpc+1) and will also set the 4th bit after left-shifting by 3 (hence this |= bits_per_component is a no-op). Now that guards are being removed to allow more bits_per_component values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with the 5th bit which is convert_rgb. This is "fortunately" also always set to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12 starts being used it'll write into simple_422 which is normally false. To solve all these overlaps, simply replicate downstream code and only set this lowest bit if bits_per_component is equal to 10. It is unclear why DSC requires this only for bpc=10 but not bpc=12, and also notice that this lowest bit wasn't set previously despite having a panel and patch on the list using it without any mentioned issues. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636311/ Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Disable dither in phys encoder cleanupJessica Zhang
Disable pingpong dither in dpu_encoder_helper_phys_cleanup(). This avoids the issue where an encoder unknowingly uses dither after reserving a pingpong block that was previously bound to an encoder that had enabled dither. Cc: stable@vger.kernel.org Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/ Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display") Patchwork: https://patchwork.freedesktop.org/patch/636517/ Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Fix uninitialized variableEthan Carter Edwards
There is a possibility for an uninitialized *ret* variable to be returned in some code paths. Fix this by initializing *ret* to 0. Addresses-Coverity-ID: 1642546 ("Uninitialized scalar variable") Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes") Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/636201/ Link: https://lore.kernel.org/r/20250209-dpu-v2-1-114dfd4ebefd@ethancedwards.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dp: account for widebus and yuv420 during mode validationAbhinav Kumar
Widebus allows the DP controller to operate in 2 pixel per clock mode. The mode validation logic validates the mode->clock against the max DP pixel clock. However the max DP pixel clock limit assumes widebus is already enabled. Adjust the mode validation logic to only compare the adjusted pixel clock which accounts for widebus against the max DP pixel clock. Also fix the mode validation logic for YUV420 modes as in that case as well, only half the pixel clock is needed. Cc: stable@vger.kernel.org Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port") Fixes: 6db6e5606576 ("drm/msm/dp: change clock related programming for YUV420 over DP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dale Whinham <daleyo@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/635789/ Link: https://lore.kernel.org/r/20250206-dp-widebus-fix-v2-1-cb89a0313286@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: correct LM pairing for SM6150Dmitry Baryshkov
The SM6150 platform doesn't have 3DMux (MERGE_3D) block, so it can not split the screen between two LMs. Drop lm_pair fields as they don't make sense for this platform. Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: cb2f9144693b ("drm/msm/dpu: Add SM6150 support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629377/ Link: https://lore.kernel.org/r/20241217-dpu-fix-sm6150-v2-1-9acc8f5addf3@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: enable DPU_WB_INPUT_CTRL for DPU 5.xDmitry Baryshkov
Several DPU 5.x platforms are supposed to be using DPU_WB_INPUT_CTRL, to bind WB and PINGPONG blocks, but they do not. Change those platforms to use WB_SM8250_MASK, which includes that bit. Fixes: 1f5bcc4316b3 ("drm/msm/dpu: enable writeback on SC8108X") Fixes: ab2b03d73a66 ("drm/msm/dpu: enable writeback on SM6125") Fixes: 47cebb740a83 ("drm/msm/dpu: enable writeback on SM8150") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628876/ Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-2-988f0662cb7e@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: skip watchdog timer programming through TOP on >= SM8450Dmitry Baryshkov
The SM8450 and later chips have DPU_MDP_PERIPH_0_REMOVED feature bit set, which means that those platforms have dropped some of the registers, including the WD TIMER-related ones. Stop providing the callback to program WD timer on those platforms. Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628874/ Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-1-988f0662cb7e@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15Merge tag 's390-6.14-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix isolated VFs handling by verifying that a VF’s parent PF is locally owned before registering it in an existing PCI domain - Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to workaround gcc failure in handling __builtin_constant_p() in this case - Fix CHPID "configure" attribute caching in CIO by not updating the cache when SCLP returns no data, ensuring consistent sysfs output - Remove CONFIG_LSM from default configs and rely on defaults, which enables BPF LSM hook * tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix handling of isolated VFs s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn() s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES s390/cio: Fix CHPID "configure" attribute caching s390/configs: Remove CONFIG_LSM
2025-02-15tegra210-adma: fix 32-bit x86 buildLinus Torvalds
The Tegra210 Audio DMA controller driver did a plain divide: page_no = (res_page->start - res_base->start) / cdata->ch_base_offset; which causes problems on 32-bit x86 configurations that have 64-bit resource sizes: x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe': tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3' because gcc doesn't generate the trivial code for a 64-by-32 divide, turning it into a function call to do a full 64-by-64 divide. And the kernel intentionally doesn't provide that helper function, because 99% of the time all you want is the narrower version. Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is purely for build testing, so this really is just about build coverage failure. But build coverage is good. Side note: div_u64() would be suboptimal if you actually have a 32-bit resource_t, so our "helper" for divides are admittedly making it harder than it should be to generate good code for all the possible cases. At some point, I'll consider 32-bit x86 so entirely legacy that I can't find it in myself to care any more, and we'll just add the __udivdi3 library function. But for now, the right thing to do is to use "div_u64()" to show that you know that you are doing the simpler divide with a 32-bit number. And the build error enforces that. While fixing the build issue, also check for division-by-zero, and for overflow. Which hopefully cannot happen on real production hardware, but the value of 'ch_base_offset' can definitely be zero in other places. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-02-15drm/msm: Avoid rounding up to one jiffyRob Clark
If userspace is trying to achieve a timeout of zero, let 'em have it. Only round up if the timeout is greater than zero. Fixes: 4969bccd5f4e ("drm/msm: Avoid rounding down to zero jiffies") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/632264/
2025-02-15drm/msm/a6xx: Only print the GMU firmware version onceKonrad Dybcio
We only fetch it once from userland, so let's also only notify the user once and not on every runtime resume. As you can notice by the tags chain, more than one user found this annoying. Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Suggested-by: Abel Vesa <abel.vesa@linaro.org> Suggested-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637062/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-02-15Merge tag 'gpio-fixes-for-v6.14-rc3-take2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix interrupt handling issues in gpio-bcm-kona - add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious wake up events - add missing return value checks to gpio-stmpe - fix a crash in error path in gpiochip_get_ngpios() * tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: Fix crash on error in gpiochip_get_ngpios() gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock gpiolib: acpi: Add a quirk for Acer Nitro ANV14 gpio: bcm-kona: Add missing newline to dev_err format string gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
2025-02-14geneve: Fix use-after-free in geneve_find_dev().Kuniyuki Iwashima
syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x48/0x68 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x140/0x420 mm/slub.c:4761 kvfree+0x4c/0x68 mm/util.c:688 netdev_release+0x94/0xc8 net/core/net-sysfs.c:2065 device_release+0x98/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x2b0/0x438 lib/kobject.c:737 netdev_run_todo+0xe5c/0xfc8 net/core/dev.c:11185 rtnl_unlock+0x20/0x38 net/core/rtnetlink.c:151 cleanup_net+0x4fc/0x8c0 net/core/net_namespace.c:648 process_one_work+0x700/0x1398 kernel/workqueue.c:3236 process_scheduled_works kernel/workqueue.c:3317 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3398 kthread+0x4bc/0x608 kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 The buggy address belongs to the object at ffff000054d6e000 which belongs to the cache kmalloc-cg-4k of size 4096 The buggy address is located 3620 bytes inside of freed 4096-byte region [ffff000054d6e000, ffff000054d6f000) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94d68 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff000016276181 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 head: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000003 fffffdffc1535a01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff000054d6ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ed80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff000054d6ee00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff000054d6ee80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ef00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250213043354.91368-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-14Merge tag 'pci-v6.14-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Update a BUILD_BUG_ON() usage that works on current compilers, but breaks compilation on gcc 5.3.1 (Alex Williamson) - Avoid use of FLR for Mediatek MT7922 WiFi; the device previously worked after a long timeout and fallback to SBR, but after a recent RRS change it doesn't work at all after FLR (Bjorn Helgaas) * tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Avoid FLR for Mediatek MT7922 WiFi PCI: Fix BUILD_BUG_ON usage for old gcc
2025-02-14Merge tag 'kvm-x86-fixes-6.14-rcN' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM fixes for 6.14 part 1 - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference. - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1. - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath.
2025-02-14x86/sev: Fix broken SNP support with KVM module built-inAshish Kalra
Fix issues with enabling SNP host support and effectively SNP support which is broken with respect to the KVM module being built-in. SNP host support is enabled in snp_rmptable_init() which is invoked as device_initcall(). SNP check on IOMMU is done during IOMMU PCI init (IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is currently invoked via device_initcall() and cannot be invoked via subsys_initcall() as core IOMMU subsystem gets initialized via subsys_initcall(). Now, if kvm_amd module is built-in, it gets initialized before SNP host support is enabled in snp_rmptable_init() : [ 10.131811] kvm_amd: TSC scaling supported [ 10.136384] kvm_amd: Nested Virtualization enabled [ 10.141734] kvm_amd: Nested Paging enabled [ 10.146304] kvm_amd: LBR virtualization supported [ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509) [ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99) [ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99) [ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported [ 10.177052] kvm_amd: Virtual GIF supported ... ... [ 10.201648] kvm_amd: in svm_enable_virtualization_cpu And then svm_x86_ops->enable_virtualization_cpu() (svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following: wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa); So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs. snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu() as following : ... [ 11.256138] kvm_amd: in svm_enable_virtualization_cpu ... [ 11.264918] SEV-SNP: in snp_rmptable_init This triggers a #GP exception in snp_rmptable_init() when snp_enable() is invoked to set SNP_EN in SYSCFG MSR: [ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30) ... [ 11.294404] Call Trace: [ 11.294482] <IRQ> [ 11.294513] ? show_stack_regs+0x26/0x30 [ 11.294522] ? ex_handler_msr+0x10f/0x180 [ 11.294529] ? search_extable+0x2b/0x40 [ 11.294538] ? fixup_exception+0x2dd/0x340 [ 11.294542] ? exc_general_protection+0x14f/0x440 [ 11.294550] ? asm_exc_general_protection+0x2b/0x30 [ 11.294557] ? __pfx_snp_enable+0x10/0x10 [ 11.294567] ? native_write_msr+0x8/0x30 [ 11.294570] ? __snp_enable+0x5d/0x70 [ 11.294575] snp_enable+0x19/0x20 [ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0 [ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20 [ 11.294589] __sysvec_call_function+0x20/0x90 [ 11.294596] sysvec_call_function+0x80/0xb0 [ 11.294601] </IRQ> [ 11.294603] <TASK> [ 11.294605] asm_sysvec_call_function+0x1f/0x30 ... [ 11.294631] arch_cpu_idle+0xd/0x20 [ 11.294633] default_idle_call+0x34/0xd0 [ 11.294636] do_idle+0x1f1/0x230 [ 11.294643] ? complete+0x71/0x80 [ 11.294649] cpu_startup_entry+0x30/0x40 [ 11.294652] start_secondary+0x12d/0x160 [ 11.294655] common_startup_64+0x13e/0x141 [ 11.294662] </TASK> This #GP exception is getting triggered due to the following errata for AMD family 19h Models 10h-1Fh Processors: Processor may generate spurious #GP(0) Exception on WRMSR instruction: Description: The Processor will generate a spurious #GP(0) Exception on a WRMSR instruction if the following conditions are all met: - the target of the WRMSR is a SYSCFG register. - the write changes the value of SYSCFG.SNPEn from 0 to 1. - One of the threads that share the physical core has a non-zero value in the VM_HSAVE_PA MSR. The document being referred to above: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf To summarize, with kvm_amd module being built-in, KVM/SVM initialization happens before host SNP is enabled and this SVM initialization sets VM_HSAVE_PA to non-zero, which then triggers a #GP when SYSCFG.SNPEn is being set and this will subsequently cause SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not set on all CPUs. Essentially SNP host enabling code should be invoked before KVM initialization, which is currently not the case when KVM is built-in. Add fix to call snp_rmptable_init() early from iommu_snp_enable() directly and not invoked via device_initcall() which enables SNP host support before KVM initialization with kvm_amd module built-in. Add additional handling for `iommu=off` or `amd_iommu=off` options. Note that IOMMUs need to be enabled for SNP initialization, therefore, if host SNP support is enabled but late IOMMU initialization fails then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity checks in SNP firmware will fail with invalid configuration error as below: [ 9.723114] ccp 0000:23:00.1: sev enabled [ 9.727602] ccp 0000:23:00.1: psp enabled [ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002) [ 9.739098] ccp 0000:a2:00.1: no command queues available [ 9.745167] ccp 0000:a2:00.1: psp enabled [ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3 [ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5 Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature") Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14crypto: ccp: Add external API interface for PSP module initializationSean Christopherson
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be loaded before KVM module. In case of module loading any dependent modules are automatically loaded but in case of built-in modules there is no inherent mechanism available to specify dependencies between modules and ensure that any dependent modules are loaded implicitly. Add a new external API interface for PSP module initialization which allows PSP SEV driver to be loaded explicitly if KVM is built-in. Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14Merge tag 'thermal-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Fix a regression caused by an inadvertent change of the THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal commits (Zhang Rui) and drop a stale piece of documentation (Daniel Lezcano)" * tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/cpufreq_cooling: Remove structure member documentation thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
2025-02-14Merge tag 'mmc-v6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - mtk-sd: Fix register settings for hs400(es) mode - sdhci_am654: Revert patch for start-signal-voltage-switch * tag 'mmc-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mtk-sd: Fix register settings for hs400(es) mode Revert "mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch"
2025-02-14Merge tag 'efi-fixes-for-v6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute into account when placing the kernel image in memory at boot. Otherwise, the presence of the kernel image could prevent such a memory region from being unplugged at runtime if it was 'cold plugged', i.e., already plugged in at boot time (and exposed via the EFI memory map). This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory attribute is used consistently by Linux before it ever turns up in production, ensuring that we can make meaningful use of it without running the risk of regressing existing users" * tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Use BIT_ULL() constants for memory attributes efi: Avoid cold plugged memory for placing the kernel
2025-02-14net: wwan: mhi_wwan_mbim: Silence sequence number glitch errorsStephan Gerhold
When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is constantly being filled with errors related to a "sequence number glitch", e.g.: [ 1903.284538] sequence number glitch prev=16 curr=0 [ 1913.812205] sequence number glitch prev=50 curr=0 [ 1923.698219] sequence number glitch prev=142 curr=0 [ 2029.248276] sequence number glitch prev=1555 curr=0 [ 2046.333059] sequence number glitch prev=70 curr=0 [ 2076.520067] sequence number glitch prev=272 curr=0 [ 2158.704202] sequence number glitch prev=2655 curr=0 [ 2218.530776] sequence number glitch prev=2349 curr=0 [ 2225.579092] sequence number glitch prev=6 curr=0 Internet connectivity is working fine, so this error seems harmless. It looks like modem does not preserve the sequence number when entering low power state; the amount of errors depends on how actively the modem is being used. A similar issue has also been seen on USB-based MBIM modems [1]. However, in cdc_ncm.c the "sequence number glitch" message is a debug message instead of an error. Apply the same to the mhi_wwan_mbim.c driver to silence these errors when using the modem. [1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.html Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-503735977cbd@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-14EDAC/qcom: Correct interrupt enable register configurationKomal Bajaj
The previous implementation incorrectly configured the cmn_interrupt_2_enable register for interrupt handling. Using cmn_interrupt_2_enable to configure Tag, Data RAM ECC interrupts would lead to issues like double handling of the interrupts (EL1 and EL3) as cmn_interrupt_2_enable is meant to be configured for interrupts which needs to be handled by EL3. EL1 LLCC EDAC driver needs to use cmn_interrupt_0_enable register to configure Tag, Data RAM ECC interrupts instead of cmn_interrupt_2_enable. Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs") Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20241119064608.12326-1-quic_kbajaj@quicinc.com
2025-02-14Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix kexec and hibernation when using 5-level page-table configuration - Remove references to non-existent SF8MM4 and SF8MM8 ID register fields, hooking up hwcaps for the FPRCVT, F8MM4 and F8MM8 fields instead - Drop unused .ARM.attributes ELF sections - Fix array indexing when probing CPU cache topology from firmware - Fix potential use-after-free in AMU initialisation code - Work around broken GTDT entries by tolerating excessively large timer arrays - Force use of Rust's "softfloat" target to avoid a threatening warning about the NEON target feature - Typo fix in GCS documentation and removal of duplicate Kconfig select * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: rust: clean Rust 1.85.0 warning using softfloat target arm64: Add missing registrations of hwcaps ACPI: GTDT: Relax sanity checking on Platform Timers array count arm64: amu: Delay allocating cpumask for AMU FIE support arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array arm64: Handle .ARM.attributes section in linker scripts arm64/hwcap: Remove stray references to SF8MMx arm64/gcs: Fix documentation for HWCAP arm64: Kconfig: Remove selecting replaced HAVE_FUNCTION_GRAPH_RETVAL arm64: Fix 5-level paging support in kexec/hibernate trampoline
2025-02-14Merge tag 'iommu-fixes-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: - core: fix potential memory leak in iopf_queue_remove_device() - Intel VT-d: handle faults correctly in intel_iommu_drain_pasid_prq() - AMD-Vi: fix faults happening in resume path - typo and spelling fixes * tag 'iommu-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/vt-d: Make intel_iommu_drain_pasid_prq() cover faults for RID iommu/exynos: Fix typos iommu: Fix a spelling error iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume path iommu: Fix potential memory leak in iopf_queue_remove_device()
2025-02-14Merge tag 'for-linus-6.14-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Three fixes to xen-swiotlb driver: - two fixes for issues coming up due to another fix in 6.12 - addition of an __init annotation" * tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Xen/swiotlb: mark xen_swiotlb_fixup() __init x86/xen: allow larger contiguous memory regions in PV guests xen/swiotlb: relax alignment requirements
2025-02-14soc: qcom: pdr: Fix the potential deadlockSaranya R
When some client process A call pdr_add_lookup() to add the look up for the service and does schedule locator work, later a process B got a new server packet indicating locator is up and call pdr_locator_new_server() which eventually sets pdr->locator_init_complete to true which process A sees and takes list lock and queries domain list but it will timeout due to deadlock as the response will queued to the same qmi->wq and it is ordered workqueue and process B is not able to complete new server request work due to deadlock on list lock. Fix it by removing the unnecessary list iteration as the list iteration is already being done inside locator work, so avoid it here and just call schedule_work() here. Process A Process B process_scheduled_works() pdr_add_lookup() qmi_data_ready_work() process_scheduled_works() pdr_locator_new_server() pdr->locator_init_complete=true; pdr_locator_work() mutex_lock(&pdr->list_lock); pdr_locate_service() mutex_lock(&pdr->list_lock); pdr_get_domain_list() pr_err("PDR: %s get domain list txn wait failed: %d\n", req->service_name, ret); Timeout error log due to deadlock: " PDR: tms/servreg get domain list txn wait failed: -110 PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110 " Thanks to Bjorn and Johan for letting me know that this commit also fixes an audio regression when using the in-kernel pd-mapper as that makes it easier to hit this race. [1] Link: https://lore.kernel.org/lkml/Zqet8iInnDhnxkT9@hovoldconsulting.com/ # [1] Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") CC: stable@vger.kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Tested-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Saranya R <quic_sarar@quicinc.com> Co-developed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250212163720.1577876-1-mukesh.ojha@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-14nouveau/svm: fix missing folio unlock + put after make_device_exclusive_range()David Hildenbrand
In case we have to retry the loop, we are missing to unlock+put the folio. In that case, we will keep failing make_device_exclusive_range() because we cannot grab the folio lock, and even return from the function with the folio locked and referenced, effectively never succeeding the make_device_exclusive_range(). While at it, convert the other unlock+put to use a folio as well. This was found by code inspection. Fixes: 8f187163eb89 ("nouveau/svm: implement atomic SVM access") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250124181524.3584236-2-david@redhat.com
2025-02-14tee: optee: Fix supplicant wait loopSumit Garg
OP-TEE supplicant is a user-space daemon and it's possible for it be hung or crashed or killed in the middle of processing an OP-TEE RPC call. It becomes more complicated when there is incorrect shutdown ordering of the supplicant process vs the OP-TEE client application which can eventually lead to system hang-up waiting for the closure of the client application. Allow the client process waiting in kernel for supplicant response to be killed rather than indefinitely waiting in an unkillable state. Also, a normal uninterruptible wait should not have resulted in the hung-task watchdog getting triggered, but the endless loop would. This fixes issues observed during system reboot/shutdown when supplicant got hung for some reason or gets crashed/killed which lead to client getting hung in an unkillable state. It in turn lead to system being in hung up state requiring hard power off/on to recover. Fixes: 4fb0a5eb364d ("tee: add OP-TEE driver") Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-02-14platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBUGeert Uytterhoeven
CZ.NIC's Turris devices are based on Marvell EBU SoCs. Hence add a dependency on ARCH_MVEBU, to prevent asking the user about these drivers when configuring a kernel that cannot run on an affected CZ.NIC Turris system. Fixes: 992f1a3d4e88498d ("platform: cznic: Add preliminary support for Turris Omnia MCU") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-02-14firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXCGeert Uytterhoeven
The i.MX System Controller Management Interface firmware is only present on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without Freescale i.MX platform support. Fixes: 514b2262ade48a05 ("firmware: arm_scmi: Fix i.MX build dependency") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-02-14phy: tegra: xusb: reset VBUS & ID OVERRIDEBH Hsieh
Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed with unexpected value prior to XUSB PADCTL driver, this could also occur in virtualization scenario. For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set a type-c port to host mode and keeps the value to kernel. If the type-c port is connected a usb host, below errors can be observed right after usb host mode driver gets probed. The errors would keep until usb role class driver detects the type-c port as device mode and notifies usb device mode driver to set both ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL driver. [ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 173.765837] usb usb3-port2: config error Taking virtualization into account, asserting XUSB PADCTL reset would break XUSB functions used by other guest OS, hence only reset VBUS & ID OVERRIDE of the port in utmi_phy_init. Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support") Cc: stable@vger.kernel.org Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591 Signed-off-by: BH Hsieh <bhsieh@nvidia.com> Signed-off-by: Henry Lin <henryl@nvidia.com> Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-02-14phy: ti: gmii-sel: Do not use syscon helper to build regmapAndrew Davis
The syscon helper device_node_to_regmap() is used to fetch a regmap registered to a device node. It also currently creates this regmap if the node did not already have a regmap associated with it. This should only be used on "syscon" nodes. This driver is not such a device and instead uses device_node_to_regmap() on its own node as a hacky way to create a regmap for itself. This will not work going forward and so we should create our regmap the normal way by defining our regmap_config, fetching our memory resource, then using the normal regmap_init_mmio() function. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20250123182234.597665-1-afd@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-02-14phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit()André Draszik
We currently don't gate the power to the SS phy in phy_exit(). Shuffle the code slightly to ensure the power is gated to the SS phy as well. Fixes: 32267c29bc7d ("phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)") CC: stable@vger.kernel.org # 6.11+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20241205-gs101-usb-phy-fix-v4-1-0278809fb810@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-02-14serial: 8250: Fix fifo underflow on flushJohn Keeping
When flushing the serial port's buffer, uart_flush_buffer() calls kfifo_reset() but if there is an outstanding DMA transfer then the completion function will consume data from the kfifo via uart_xmit_advance(), underflowing and leading to ongoing DMA as the driver tries to transmit another 2^32 bytes. This is readily reproduced with serial-generic and amidi sending even short messages as closing the device on exit will wait for the fifo to drain and in the underflow case amidi hangs for 30 seconds on exit in tty_wait_until_sent(). A trace of that gives: kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3 amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3 irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293 irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197 irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101 irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096 Since the port lock is held in when the kfifo is reset in uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer hook to adjust the outstanding DMA byte count is sufficient to avoid the kfifo underflow. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable <stable@kernel.org> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERYJos Wang
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is used by the Policy Engine in Dual-Role Power device that is currently acting as a Sink to timeout on a PS_RDY Message during a Power Role Swap sequence. This condition leads to a Hard Reset for USB Type-A and Type-B Plugs and Error Recovery for Type-C plugs and return to USB Default Operation. Therefore, after PSSourceOffTimer timeout, the tcpm state machine should switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also solve the test items in the USB power delivery compliance test: TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout [1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable <stable@kernel.org> Signed-off-by: Jos Wang <joswang@lenovo.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Amit Sunil Dhamne <amitsd@google.com> Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: roles: set switch registered flag early onElson Roy Serrao
The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, set the registered flag early on in the switch register API. Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: gadget: uvc: Fix unstarted kthread workerFrederic Weisbecker
The behaviour of kthread_create_worker() was recently changed to align with the one of kthread_create(). The kthread worker is created but not awaken by default. This is to allow the use of kthread_affine_preferred() and kthread_bind[_mask]() with kthread workers. In order to keep the old behaviour and wake the kthread up, kthread_run_worker() must be used. All the pre-existing users have been converted, except for UVC that was introduced in the same merge window as the API change. This results in hangs: INFO: task UVCG:82 blocked for more than 491 seconds. Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1 task:UVCG state:D stack:0 pid:82 Call Trace: __schedule schedule schedule_preempt_disabled kthread ? kthread_flush_work ret_from_fork ret_from_fork_asm entry_INT80_32 Fix this with converting UVCG kworker to the new API. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue") Cc: stable <stable@kernel.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast distLei Huang
Teclast disk used on Huawei hisi platforms doesn't work well, losing connectivity intermittently if LPM is enabled. Add quirk disable LPM to resolve the issue. Signed-off-by: Lei Huang <huanglei@kylinos.cn> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-25 21:35:15 +0000