summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-31nvme-fc: use ctrl state getterDaniel Wagner
Do not access the state variable directly, instead use proper synchronization so not stale data is read. Fixes: e6e7f7ac03e4 ("nvme: ensure reset state check ordering") Signed-off-by: Daniel Wagner <wagi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-01-31nvme: make nvme_tls_attrs_group staticKeith Busch
To suppress the compiler "warning: symbol 'nvme_tls_attrs_group' was not declared. Should it be static?" Fixes: 1e48b34c9bc79a ("nvme: split off TLS sysfs attributes into a separate group") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-01-31ice: stop storing XDP verdict within ice_rx_bufMaciej Fijalkowski
Idea behind having ice_rx_buf::act was to simplify and speed up the Rx data path by walking through buffers that were representing cleaned HW Rx descriptors. Since it caused us a major headache recently and we rolled back to old approach that 'puts' Rx buffers right after running XDP prog/creating skb, this is useless now and should be removed. Get rid of ice_rx_buf::act and related logic. We still need to take care of a corner case where XDP program releases a particular fragment. Make ice_run_xdp() to return its result and use it within ice_put_rx_mbuf(). Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-31ice: gather page_count()'s of each frag right before XDP prog callMaciej Fijalkowski
If we store the pgcnt on few fragments while being in the middle of gathering the whole frame and we stumbled upon DD bit not being set, we terminate the NAPI Rx processing loop and come back later on. Then on next NAPI execution we work on previously stored pgcnt. Imagine that second half of page was used actively by networking stack and by the time we came back, stack is not busy with this page anymore and decremented the refcnt. The page reuse algorithm in this case should be good to reuse the page but given the old refcnt it will not do so and attempt to release the page via page_frag_cache_drain() with pagecnt_bias used as an arg. This in turn will result in negative refcnt on struct page, which was initially observed by Xu Du. Therefore, move the page count storage from ice_get_rx_buf() to a place where we are sure that whole frame has been collected, but before calling XDP program as it internally can also change the page count of fragments belonging to xdp_buff. Fixes: ac0753391195 ("ice: Store page count inside ice_rx_buf") Reported-and-tested-by: Xu Du <xudu@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-31ice: put Rx buffers after being done with current frameMaciej Fijalkowski
Introduce a new helper ice_put_rx_mbuf() that will go through gathered frags from current frame and will call ice_put_rx_buf() on them. Current logic that was supposed to simplify and optimize the driver where we go through a batch of all buffers processed in current NAPI instance turned out to be broken for jumbo frames and very heavy load that was coming from both multi-thread iperf and nginx/wrk pair between server and client. The delay introduced by approach that we are dropping is simply too big and we need to take the decision regarding page recycling/releasing as quick as we can. While at it, address an error path of ice_add_xdp_frag() - we were missing buffer putting from day 1 there. As a nice side effect we get rid of annoying and repetitive three-liner: xdp->data = NULL; rx_ring->first_desc = ntc; rx_ring->nr_frags = 0; by embedding it within introduced routine. Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") Reported-and-tested-by: Xu Du <xudu@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-31Merge tag 'sound-fix-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a collection of fixes that have been gathered since the previous pull request. All about device-specific fixes and quirks, and most of them are pretty small and trivial" * tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits) ALSA: hda/realtek: Workaround for resume on Dell Venue 11 Pro 7130 ALSA: hda: Fix headset detection failure due to unstable sort ALSA: pcm: use new array-copying-wrapper ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control ASoC: amd: acp: Fix possible deadlock firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro ALSA: hda/realtek: Fix quirk matching for Legion Pro 7 ASoC: renesas: SND_SIU_MIGOR should depend on DMADEVICES ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V ASoC: da7213: Initialize the mutex ASoC: use to_platform_device() instead of container_of() ASoC: acp: Support microphone from Lenovo Go S ASoC: SOF: imx8m: Add entry for new 8M Plus revision ASoC: SOF: imx8: Add entries for new 8QM and 8QXP revisions ASoC: SOF: imx: Add mach entry to select cs42888 topology dt-bindings: arm: imx: Add board revisions for i.MX8MP, i.MX8QM and i.MX8QXP ASoC: fsl_asrc_m2m: select CONFIG_DMA_SHARED_BUFFER ASoC: audio-graph-card2: use correct endpoint when getting link parameters ASoC: SOF: imx8m: add SAI2,5,6,7 ...
2025-01-31block: force noio scope in blk_mq_freeze_queueChristoph Hellwig
When block drivers or the core block code perform allocations with a frozen queue, this could try to recurse into the block device to reclaim memory and deadlock. Thus all allocations done by a process that froze a queue need to be done without __GFP_IO and __GFP_FS. Instead of tying to track all of them down, force a noio scope as part of freezing the queue. Note that nvme is a bit of a mess here due to the non-owner freezes, and they will be addressed separately. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-31gpu: drm_dp_cec: fix broken CEC adapter properties checkHans Verkuil
If the hotplug detect of a display is low for longer than one second (configurable through drm_dp_cec_unregister_delay), then the CEC adapter is unregistered since we assume the display was disconnected. If the HPD went low for less than one second, then we check if the properties of the CEC adapter have changed, since that indicates that we actually switch to new hardware and we have to unregister the old CEC device and register a new one. Unfortunately, the test for changed properties was written poorly, and after a new CEC capability was added to the CEC core code the test always returned true (i.e. the properties had changed). As a result the CEC device was unregistered and re-registered for every HPD toggle. If the CEC remote controller integration was also enabled (CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was also unregistered and re-registered. As a result the input device in /sys would keep incrementing its number, e.g.: /sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20 Since short HPD toggles are common, the number could over time get into the thousands. While not a serious issue (i.e. nothing crashes), it is not intended to work that way. This patch changes the test so that it only checks for the single CEC capability that can actually change, and it ignores any other capabilities, so this is now safe as well if new caps are added in the future. With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be dropped as well, so that's a nice cleanup. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reported-by: Farblos <farblos@vodafonemail.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 2c6d1fffa1d9 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX") Tested-by: Farblos <farblos@vodafonemail.de> Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-30Merge tag 'ubifs-for-linus-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: "UBI: - New interface to dump detailed erase counters - Fixes around wear-leveling UBIFS: - Minor cleanups - Fix for TNC dumping code" * tag 'ubifs-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: ubi_get_ec_info: Fix compiling error 'cast specifies array type' ubi: Implement ioctl for detailed erase counters ubi: Expose interface for detailed erase counters ubifs: skip dumping tnc tree when zroot is null ubi: Revert "ubi: wl: Close down wear-leveling before nand is suspended" ubifs: ubifs_dump_leb: remove return from end of void function ubifs: dump_lpt_leb: remove return at end of void function ubi: Add a check for ubi_num
2025-01-30Merge tag 'rtc-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Not much this cycle, there are multiple small fixes. Core: - use boolean values with device_init_wakeup() Drivers: - pcf2127: add BSM support - pcf85063: fix possible out of bounds write" * tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: pcf2127: add BSM support rtc: Remove hpet_rtc_dropped_irq() dt-bindings: rtc: mxc: Document fsl,imx31-rtc rtc: stm32: Use syscon_regmap_lookup_by_phandle_args rtc: zynqmp: Fix optional clock name property rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr() rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read rtc: tps6594: Fix integer overflow on 32bit systems rtc: use boolean values with device_init_wakeup() rtc: RTC_DRV_SPEAR should not default to y when compile-testing
2025-01-30Merge tag 'i2c-for-6.14-rc1-take2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - add a missing Kconfig dependency for imx-lpi2c - in the core, handle the new per-client debugfs directory during probe/remove, not during {un}register * tag 'i2c-for-6.14-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Fix core-managed per-client debugfs handling i2c: imx-lpi2c: select CONFIG_I2C_SLAVE
2025-01-30Merge tag 'acpi-6.14-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans de Goede) and fix the MADT parsing code so that CPUs with different entry types (LAPIC and x2APIC) are initialized in the order in which they appear in the MADT as required by the ACPI specification (Zhang Rui)" * tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/acpi: Fix LAPIC/x2APIC parsing order ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
2025-01-30Merge tag 'pm-6.14-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly fixes on top of the previously merged power management material with the addition of some teo cpuidle governor updates, some of which may also be regarded as fixes: - Add missing error handling for syscore_suspend() to the hibernation core code (Wentao Liang) - Revert a commit that added unused macros (Andy Shevchenko) - Synchronize the runtime PM status of devices that were runtime- suspended before a system-wide suspend and need to be resumed during the subsequent system-wide resume transition (Rafael Wysocki) - Clean up the teo cpuidle governor and make the handling of short idle intervals in it consistent regardless of the properties of idle states supplied by the cpuidle driver (Rafael Wysocki) - Fix some boost-related issues in cpufreq (Lifeng Zheng) - Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh Kumar) - Remove unconditional binding of schedutil governor kthreads to the affected CPUs if the cpufreq driver indicates that updates can happen from any CPU (Christian Loehle)" * tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: core: Synchronize runtime PM status of parents and children cpufreq: airoha: Depends on OF PM: Revert "Add EXPORT macros for exporting PM functions" PM: hibernate: Add error handling for syscore_suspend() cpufreq/schedutil: Only bind threads if needed cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init() cpufreq: CPPC: Fix wrong max_freq in policy initialization cpufreq: Introduce a more generic way to set default per-policy boost flag cpufreq: Fix re-boost issue after hotplugging a CPU cpufreq: s3c64xx: Fix compilation warning cpuidle: teo: Skip sleep length computation for low latency constraints cpuidle: teo: Replace time_span_ns with a flag cpuidle: teo: Simplify handling of total events count cpuidle: teo: Skip getting the sleep length if wakeups are very frequent cpuidle: teo: Simplify counting events used for tick management cpuidle: teo: Clarify two code comments cpuidle: teo: Drop local variable prev_intercept_idx cpuidle: teo: Combine candidate state index checks against 0 cpuidle: teo: Reorder candidate state index checks cpuidle: teo: Rearrange idle state lookup code
2025-01-30Merge branch 'pm-sleep'Rafael J. Wysocki
Merge fixes related to system sleep for 6.14-rc1: - Add missing error handling for syscore_suspend() to the hibernation core code (Wentao Liang). - Revert a commit that added unused macros (Andy Shevchenko). - Synchronize the runtime PM status of devices that were runtime- suspended before a system-wide suspend and need to be resumed during the subsequent syste-wide resume transition (Rafael Wysocki). * pm-sleep: PM: sleep: core: Synchronize runtime PM status of parents and children PM: Revert "Add EXPORT macros for exporting PM functions" PM: hibernate: Add error handling for syscore_suspend()
2025-01-30Merge branch 'pm-cpuidle'Rafael J. Wysocki
Merge updates of the teo cpuidle governor for 6.14-rc1 that clean it up and make the handling of short idle intervals in it consistent regardless of the properties of idle states supplied by the cpuidle driver. * pm-cpuidle: cpuidle: teo: Skip sleep length computation for low latency constraints cpuidle: teo: Replace time_span_ns with a flag cpuidle: teo: Simplify handling of total events count cpuidle: teo: Skip getting the sleep length if wakeups are very frequent cpuidle: teo: Simplify counting events used for tick management cpuidle: teo: Clarify two code comments cpuidle: teo: Drop local variable prev_intercept_idx cpuidle: teo: Combine candidate state index checks against 0 cpuidle: teo: Reorder candidate state index checks cpuidle: teo: Rearrange idle state lookup code
2025-01-30Merge tag 'net-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from IPSec, netfilter and Bluetooth. Nothing really stands out, but as usual there's a slight concentration of fixes for issues added in the last two weeks before the merge window, and driver bugs from 6.13 which tend to get discovered upon wider distribution. Current release - regressions: - net: revert RTNL changes in unregister_netdevice_many_notify() - Bluetooth: fix possible infinite recursion of btusb_reset - eth: adjust locking in some old drivers which protect their state with spinlocks to avoid sleeping in atomic; core protects netdev state with a mutex now Previous releases - regressions: - eth: - mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node() - bgmac: reduce max frame size to support just 1500 bytes; the jumbo frame support would previously cause OOB writes, but now fails outright - mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid false detection of MPTCP blackholing Previous releases - always broken: - mptcp: handle fastopen disconnect correctly - xfrm: - make sure skb->sk is a full sock before accessing its fields - fix taking a lock with preempt disabled for RT kernels - usb: ipheth: improve safety of packet metadata parsing; prevent potential OOB accesses - eth: renesas: fix missing rtnl lock in suspend/resume path" * tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) MAINTAINERS: add Neal to TCP maintainers net: revert RTNL changes in unregister_netdevice_many_notify() net: hsr: fix fill_frame_info() regression vs VLAN packets doc: mptcp: sysctl: blackhole_timeout is per-netns mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted netfilter: nf_tables: reject mismatching sum of field_len with set key length net: sh_eth: Fix missing rtnl lock in suspend/resume path net: ravb: Fix missing rtnl lock in suspend/resume path selftests/net: Add test for loading devbound XDP program in generic mode net: xdp: Disallow attaching device-bound programs in generic mode tcp: correct handling of extreme memory squeeze bgmac: reduce max frame size to support just MTU 1500 vsock/test: Add test for connect() retries vsock/test: Add test for UAF due to socket unbinding vsock/test: Introduce vsock_connect_fd() vsock/test: Introduce vsock_bind() vsock: Allow retrying on connect() failure vsock: Keep the binding until socket destruction Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming ...
2025-01-30Merge tag 's390-6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - The rework that uncoupled physical and virtual address spaces inadvertently prevented KASAN shadow mappings from using large pages. Restore large page mappings for KASAN shadows - Add decompressor routine physmem_alloc() that may fail, unlike physmem_alloc_or_die(). This allows callers to implement fallback paths - Allow falling back from large pages to smaller pages (1MB or 4KB) if the allocation of 2GB pages in the decompressor can not be fulfilled - Add to the decompressor boot print support of "%%" format string, width and padding hadnling, length modifiers and decimal conversion specifiers - Add to the decompressor message severity levels similar to kernel ones. Support command-line options that control console output verbosity - Replaces boot_printk() calls with appropriate loglevel- specific helpers such as boot_emerg(), boot_warn(), and boot_debug(). - Collect all boot messages into a ring buffer independent of the current log level. This is particularly useful for early crash analysis - If 'earlyprintk' command line parameter is not specified, store decompressor boot messages in a ring buffer to be printed later by the kernel, once the console driver is registered - Add 'bootdebug' command line parameter to enable printing of decompressor debug messages when needed. That parameters allows message suppressing and filtering - Dump boot messages on a decompressor crash, but only if 'bootdebug' command line parameter is enabled - When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages in the same format as regular printk() - Dump physical memory tracking information on boot: online ranges, reserved areas and vmem allocations - Dump virtual memory layout and randomization details - Improve decompression error reporting and dump the message ring buffer in case the boot failed and system halted - Add an exception handler which handles exceptions when FPU control register is attempted to be set to an invalid value. Remove '.fixup' section as result of this change - Use 'A', 'O', and 'R' inline assembly format flags, which allows recent Clang compilers to generate better FPU code - Rework uaccess code so it reads better and generates more efficient code - Cleanup futex inline assembly code - Disable KMSAN instrumention for futex inline assemblies, which contain dereferenced user pointers. Otherwise, shadows for the user pointers would be accessed - PFs which are not initially configured but in standby create only a single-function PCI domain. If they are configured later on, sibling PFs and their child VFs will not be added to their PCI domain breaking SR-IOV expectations. Fix that by allowing initially configured but in standby PFs create multi-function PCI domains - Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid compile errors caused by kernel's own definitions of 'bool', 'false', and 'true' conflicting with the C23 reserved keywords - Fix sclp subsystem failure when a sclp console is not present - Fix misuse of non-NULL terminated strings in vmlogrdr driver - Various other small improvements, cleanups and fixes * tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits) s390/vmlogrdr: Use array instead of string initializer s390/vmlogrdr: Use internal_name for error messages s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init() s390/tools: Use array instead of string initializer s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init() s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS s390/bitops: Use correct constraint for arch_test_bit() inline assembly s390/pci: Fix SR-IOV for PFs initially in standby s390/futex: Avoid KMSAN instrumention for user pointers s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline s390/futex: Cleanup futex_atomic_cmpxchg_inatomic() s390/futex: Generate futex atomic op functions s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER s390/uaccess: Use asm goto for put_user()/get_user() s390/uaccess: Remove usage of the oac specifier s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers s390/uaccess: Move put_user() / __put_user() close to put_user() asm code s390/uaccess: Use asm goto for __mvc_kernel_nofault() ...
2025-01-30Merge tag 'gpio-fixes-for-v6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - update gpio-sim selftests to not fail now that we no longer allow rmdir() on configfs entries of active devices - remove leftover code from gpio-mxc * tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: selftests: gpio: gpio-sim: Fix missing chip disablements gpio: mxc: remove dead code after switch to DT-only
2025-01-30net: sh_eth: Fix missing rtnl lock in suspend/resume pathKory Maincent
Fix the suspend/resume path by ensuring the rtnl lock is held where required. Calls to sh_eth_close, sh_eth_open and wol operations must be performed under the rtnl lock to prevent conflicts with ongoing ndo operations. Fixes: b71af04676e9 ("sh_eth: add more PM methods") Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-30net: ravb: Fix missing rtnl lock in suspend/resume pathKory Maincent
Fix the suspend/resume path by ensuring the rtnl lock is held where required. Calls to ravb_open, ravb_close and wol operations must be performed under the rtnl lock to prevent conflicts with ongoing ndo operations. Without this fix, the following warning is triggered: [ 39.032969] ============================= [ 39.032983] WARNING: suspicious RCU usage [ 39.033019] ----------------------------- [ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious rcu_dereference_protected() usage! ... [ 39.033597] stack backtrace: [ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted 6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7 [ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) [ 39.033628] Call trace: [ 39.033633] show_stack+0x14/0x1c (C) [ 39.033652] dump_stack_lvl+0xb4/0xc4 [ 39.033664] dump_stack+0x14/0x1c [ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c [ 39.033682] phy_detach+0x160/0x190 [ 39.033694] phy_disconnect+0x40/0x54 [ 39.033703] ravb_close+0x6c/0x1cc [ 39.033714] ravb_suspend+0x48/0x120 [ 39.033721] dpm_run_callback+0x4c/0x14c [ 39.033731] device_suspend+0x11c/0x4dc [ 39.033740] dpm_suspend+0xdc/0x214 [ 39.033748] dpm_suspend_start+0x48/0x60 [ 39.033758] suspend_devices_and_enter+0x124/0x574 [ 39.033769] pm_suspend+0x1ac/0x274 [ 39.033778] state_store+0x88/0x124 [ 39.033788] kobj_attr_store+0x14/0x24 [ 39.033798] sysfs_kf_write+0x48/0x6c [ 39.033808] kernfs_fop_write_iter+0x118/0x1a8 [ 39.033817] vfs_write+0x27c/0x378 [ 39.033825] ksys_write+0x64/0xf4 [ 39.033833] __arm64_sys_write+0x18/0x20 [ 39.033841] invoke_syscall+0x44/0x104 [ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4 [ 39.033862] do_el0_svc+0x18/0x20 [ 39.033870] el0_svc+0x3c/0xf0 [ 39.033880] el0t_64_sync_handler+0xc0/0xc4 [ 39.033888] el0t_64_sync+0x154/0x158 [ 39.041274] ravb 11c30000.ethernet eth0: Link is Down Reported-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Closes: https://lore.kernel.org/netdev/4c6419d8-c06b-495c-b987-d66c2e1ff848@tuxon.dev/ Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-30Merge tag 'for-net-2025-01-29' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btusb: mediatek: Add locks for usb_driver_claim_interface() - L2CAP: accept zero as a special value for MTU auto-selection - btusb: Fix possible infinite recursion of btusb_reset - Add ABI doc for sysfs reset - btnxpuart: Fix glitches seen in dual A2DP streaming * tag 'for-net-2025-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming Bluetooth: Add ABI doc for sysfs reset Bluetooth: Fix possible infinite recursion of btusb_reset Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface() ==================== Link: https://patch.msgid.link/20250129210057.1318963-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-29bgmac: reduce max frame size to support just MTU 1500Rafał Miłecki
bgmac allocates new replacement buffer before handling each received frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU time. Ideally bgmac should just respect currently set MTU but it isn't the case right now. For now just revert back to the old limited frame size. This change bumps NAT masquerade speed by ~95%. Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for page_frag_alloc_align()"), the bgmac driver fails to open its network interface successfully and runs out of memory in the following call stack: bgmac_open -> bgmac_dma_init -> bgmac_dma_rx_skb_for_slot -> netdev_alloc_frag BGMAC_RX_ALLOC_SIZE = 10048 and PAGE_FRAG_CACHE_MAX_SIZE = 32768. Eventually we land into __page_frag_alloc_align() with the following parameters across multiple successive calls: __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=0 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=10048 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=20096 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=30144 So in that case we do indeed have offset + fragsz (40192) > size (32768) and so we would eventually return NULL. Reverting to the older 1500 bytes MTU allows the network driver to be usable again. Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [florian: expand commit message about recent commits] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-29Merge tag 'soundwire-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - SoundWire multi lane support to use multiple lanes if supported - Stream handling of DEPREPARED state - AMD wake register programming for power off mode * tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: amd: clear wake enable register for power off mode soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only SoundWire: pass stream to compute_params() soundwire: generic_bandwidth_allocation: add lane in sdw_group_params soundwire: generic_bandwidth_allocation: select data lane soundwire: generic_bandwidth_allocation: check required freq accurately soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col Soundwire: generic_bandwidth_allocation: set frame shape on fly Soundwire: stream: program BUSCLOCK_SCALE Soundwire: add sdw_slave_get_scale_index helper soundwire: generic_bandwidth_allocation: skip DEPREPARED streams soundwire: stream: set DEPREPARED state earlier soundwire: add lane_used_bandwidth in struct sdw_bus soundwire: mipi_disco: read lane mapping properties from ACPI soundwire: add lane field in sdw_port_runtime soundwire: bus: Move irq mapping cleanup into devres
2025-01-29Merge tag 'phy-for-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "Lots of Qualcomm and Rockchip device support. New Support: - Qualcomm SAR2130P qmp usb, SAR2130P qmp pcie, QCS615 qusb2 and PCIe, IPQ5424 qmp pcie, IPQ5424 QUSB2 and USB3 PHY - Rockchip rk3576 combo phy support Updates: - Drop Shengyang for JH7110 maintainer - Freescale hdmi register calculation optimization - Rockchip pcie phy mutex and regmap updates" * tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (37 commits) dt-bindings: phy: qcom,qmp-pcie: document the SM8350 two lanes PCIe PHY phy: rockchip: phy-rockchip-typec: Fix Copyright description dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ5424 QMP PCIe PHYs phy: qcom-qusb2: Add support for QCS615 dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings phy: core: Simplify API of_phy_simple_xlate() implementation phy: sun4i-usb: Remove unused of_gpio.h phy: HiSilicon: Don't use "proxy" headers phy: samsung-ufs: switch back to syscon_regmap_lookup_by_phandle() phy: qualcomm: qmp-pcie: add support for SAR2130P phy: qualcomm: qmp-pcie: define several new registers phy: qualcomm: qmp-pcie: split PCS_LANE1 region phy: qualcomm: qmp-combo: add support for SAR2130P dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SAR2130P compatible dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add SAR2130P compatible phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation phy: freescale: fsl-samsung-hdmi: Stop searching when exact match is found phy: freescale: fsl-samsung-hdmi: Expand Integer divider range phy: rockchip-naneng-combo: add rk3576 support dt-bindings: phy: rockchip: add rk3576 compatible ...
2025-01-29Merge tag 'dmaengine-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "A bunch of new device support and updates to few drivers, biggest of them amd ones. New support: - TI J722S CSI BCDMA controller support - Intel idxd Panther Lake family platforms - Allwinner F1C100s suniv DMA - Qualcomm QCS615, QCS8300, SM8750, SA8775P GPI dma controller support - AMD ae4dma controller support and reorganisation of amd driver Updates: - Channel page support for Nvidia Tegra210 adma driver - Freescale support for S32G based platforms - Yamilfy atmel dma bindings" * tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (45 commits) dmaengine: idxd: Enable Function Level Reset (FLR) for halt dmaengine: idxd: Refactor halt handler dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers dmaengine: idxd: Binding and unbinding IDXD device and driver dmaengine: idxd: Add idxd_pci_probe_alloc() helper dt-bindings: dma: atmel: Convert to json schema dt-bindings: dma: st-stm32-dmamux: Add description for dma-cell values dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol dt-bindings: dma: adi,axi-dmac: deprecate adi,channels node dt-bindings: dma: adi,axi-dmac: convert to yaml schema dmaengine: mv_xor: switch to for_each_child_of_node_scoped() dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy dmaengine: tegra210-adma: Support channel page dt-bindings: dma: Support channel page to nvidia,tegra210-adma dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA dt-bindings: dma: ti: k3-bcdma: Add J722S CSI BCDMA dmaengine: ti: edma: fix OF node reference leaks in edma_driver dmaengine: ti: edma: make the loop condition simpler in edma_probe() dmaengine: fsl-edma: read/write multiple registers in cyclic transactions dmaengine: fsl-edma: add support for S32G based platforms ...
2025-01-29Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streamingNeeraj Sanjay Kale
This fixes a regression caused by previous commit for fixing truncated ACL data, which is causing some intermittent glitches when running two A2DP streams. serdev_device_write_buf() is the root cause of the glitch, which is reverted, and the TX work will continue to write until the queue is empty. This change fixes both issues. No A2DP streaming glitches or truncated ACL data issue observed. Fixes: 8023dd220425 ("Bluetooth: btnxpuart: Fix driver sending truncated data") Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-29Bluetooth: Fix possible infinite recursion of btusb_resetHsin-chen Chuang
The function enters infinite recursion if the HCI device doesn't support GPIO reset: btusb_reset -> hdev->reset -> vendor_reset -> btusb_reset... btusb_reset shouldn't call hdev->reset after commit f07d478090b0 ("Bluetooth: Get rid of cmd_timeout and use the reset callback") Fixes: f07d478090b0 ("Bluetooth: Get rid of cmd_timeout and use the reset callback") Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-29Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()Douglas Anderson
The documentation for usb_driver_claim_interface() says that "the device lock" is needed when the function is called from places other than probe(). This appears to be the lock for the USB interface device. The Mediatek btusb code gets called via this path: Workqueue: hci0 hci_power_on [bluetooth] Call trace: usb_driver_claim_interface btusb_mtk_claim_iso_intf btusb_mtk_setup hci_dev_open_sync hci_power_on process_scheduled_works worker_thread kthread With the above call trace the device lock hasn't been claimed. Claim it. Without this fix, we'd sometimes see the error "Failed to claim iso interface". Sometimes we'd even see worse errors, like a NULL pointer dereference (where `intf->dev.driver` was NULL) with a trace like: Call trace: usb_suspend_both usb_runtime_suspend __rpm_callback rpm_suspend pm_runtime_work process_scheduled_works Both errors appear to be fixed with the proper locking. Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-29drm/komeda: Add check for komeda_get_layer_fourcc_list()Haoxiang Li
Add check for the return value of komeda_get_layer_fourcc_list() to catch the potential exception. Fixes: 5d51f6c0da1b ("drm/komeda: Add writeback support") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://lore.kernel.org/r/20241219090256.146424-1-haoxiang_li2024@163.com Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2025-01-29iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()Chengen Du
When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message. Signed-off-by: Chengen Du <chengen.du@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2025-01-29firmware: iscsi_ibft: fix ISCSI_IBFT Kconfig entryPrasad Pandit
Fix ISCSI_IBFT Kconfig entry, replace tab with a space character. Fixes: 138fe4e0697 ("Firmware: add iSCSI iBFT Support") Signed-off-by: Prasad Pandit <pjp@fedoraproject.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2025-01-29Merge tag 'regulator-fix-v6.14-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes that have come in during the merge window: one that operates the TPS6287x devices more within the design spec and can prevent current surges when changing voltages and another more trivial one for error message formatting" * tag 'regulator-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Add missing newline character regulator: TPS6287X: Use min/max uV to get VRANGE
2025-01-29Merge tag 'for-linus-6.14-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Three minor fixes" * tag 'for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: update pvcalls_front_accept prototype Grab mm lock before grabbing pt lock xen: pcpu: remove unnecessary __ref annotation
2025-01-29Merge tag 'cxl-for-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull Compute Express Link (CXL) updates from Dave Jiang: "A tweak to the HMAT output that was acked by Rafael, a prep patch for CXL type2 devices support that's coming soon, refactoring of the CXL regblock enumeration code, and a series of patches to update the event records to CXL spec r3.1: - Move HMAT printouts to pr_debug() - Add CXL type2 support to cxl_dvsec_rr_decode() in preparation for type2 support - A series that updates CXL event records to spec r3.1 and related changes - Refactoring of cxl_find_regblock_instance() to count regblocks" * tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/core/regs: Refactor out functions to count regblocks of given type cxl/test: Update test code for event records to CXL spec rev 3.1 cxl/events: Update Memory Module Event Record to CXL spec rev 3.1 cxl/events: Update DRAM Event Record to CXL spec rev 3.1 cxl/events: Update General Media Event Record to CXL spec rev 3.1 cxl/events: Add Component Identifier formatting for CXL spec rev 3.1 cxl/events: Update Common Event Record to CXL spec rev 3.1 cxl/pci: Add CXL Type 1/2 support to cxl_dvsec_rr_decode() ACPI/HMAT: Move HMAT messages to pr_debug()
2025-01-29Merge tag 'constfy-sysctl-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl Pull sysctl table constification from Joel Granados: "All ctl_table declared outside of functions and that remain unmodified after initialization are const qualified. This prevents unintended modifications to proc_handler function pointers by placing them in the .rodata section. This is a continuation of the tree-wide effort started a few releases ago with the constification of the ctl_table struct arguments in the sysctl API done in 78eb4ea25cd5 ("sysctl: treewide: constify the ctl_table argument of proc_handlers")" * tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: treewide: const qualify ctl_tables where applicable
2025-01-29Merge tag 'asoc-fix-v6.14-merge-window' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.14 A bunch of fixes that came in during the merge window, plus a few new device IDs. The i.MX changes are a little large since they add some new quirk data as well as device IDs, and the audio graph card change for picking the correct endpoint for links is large due to updating a number of call sites.
2025-01-29s390/vmlogrdr: Use array instead of string initializerHeiko Carstens
Compiling vmlogrdr with GCC 15 generates this warning: CC [M] drivers/s390/char/vmlogrdr.o drivers/s390/char/vmlogrdr.c:126:29: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization] 126 | { .system_service = "*LOGREC ", Given that the system_service array intentionally contains a non-null terminated string use an array initializer, instead of string initializer to get rid of this warning. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-29s390/vmlogrdr: Use internal_name for error messagesHeiko Carstens
Use the internal_name member of vmlogrdr_priv_t to print error messages instead of the system_service member. The system_service member is not a string, but a non-null terminated eight byte character array, which contains the ASCII representation of a z/VM system service. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-29PM: sleep: core: Synchronize runtime PM status of parents and childrenRafael J. Wysocki
Commit 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase") overlooked the case in which the parent of a device with DPM_FLAG_SMART_SUSPEND set did not use that flag and could be runtime- suspended before a transition into a system-wide sleep state. In that case, if the child is resumed during the subsequent transition from that state into the working state, its runtime PM status will be set to RPM_ACTIVE, but the runtime PM status of the parent will not be updated accordingly, even though the parent will be resumed too, because of the dev_pm_skip_suspend() check in device_resume_noirq(). Address this problem by tracking the need to set the runtime PM status to RPM_ACTIVE during system-wide resume transitions for devices with DPM_FLAG_SMART_SUSPEND set and all of the devices depended on by them. Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase") Closes: https://lore.kernel.org/linux-pm/Z30p2Etwf3F2AUvD@hovoldconsulting.com/ Reported-by: Johan Hovold <johan@kernel.org> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://patch.msgid.link/12619233.O9o76ZdvQC@rjwysocki.net
2025-01-29cpufreq: airoha: Depends on OFViresh Kumar
The Airoha cpufreq depends on OF and must be marked as such. With the kernel compiled without OF support, we get following warning: drivers/cpufreq/airoha-cpufreq.c:109:34: warning: 'airoha_cpufreq_match_list' defined but not used [-Wunused-const-variable=] 109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = { | ^~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501251941.0fXlcd1D-lkp@intel.com/ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/455e18c947bd9529701a2f1c796f0f934d1354d7.1738050679.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-29rtc: pcf2127: add BSM supportAlexandre Belloni
The pcf2127 encodes BSM, BLD and power fail detection in the same set of bits so it is necessary to do some calculation when changing BSM to keep the rest of the configuration as-is. However, when BSM is disabled, there is no configuration with BLD enabled so this will be lost when coming back to a mode with BSM enabled. Link: https://lore.kernel.org/r/20250127162728.86234-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-01-28Merge tag 'vfio-v6.14-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio updates from Alex Williamson: - Extend vfio-pci 8-byte read/write support to include archs defining CONFIG_GENERIC_IOMAP, such as x86, and remove now extraneous #ifdefs around 64-bit accessors (Ramesh Thomas) - Update vfio-pci shadow ROM handling and allow cached ROM from setup data to be exposed as a functional ROM BAR region when available (Yunxiang Li) - Update nvgrace-gpu vfio-pci variant driver for new Grace Blackwell hardware, conditionalizing the uncached BAR workaround for previous generation hardware based on the presence of a flag in a new DVSEC capability, and include a delay during probe for link training to complete, a new requirement for GB devices (Ankit Agrawal) * tag 'vfio-v6.14-rc1' of https://github.com/awilliam/linux-vfio: vfio/nvgrace-gpu: Add GB200 SKU to the devid table vfio/nvgrace-gpu: Check the HBM training and C2C link status vfio/nvgrace-gpu: Expose the blackwell device PF BAR1 to the VM vfio/nvgrace-gpu: Read dvsec register to determine need for uncached resmem vfio/platform: check the bounds of read/write syscalls vfio/pci: Expose setup ROM at ROM bar when needed vfio/pci: Remove shadow ROM specific code paths vfio/pci: Remove #ifdef iowrite64 and #ifdef ioread64 vfio/pci: Enable iowrite64 and ioread64 for vfio pci
2025-01-28drm/amd/display: restore invalid MSA timing check for freesyncMelissa Wen
This restores the original behavior that gets min/max freq from EDID and only set DP/eDP connector as freesync capable if "sink device is capable of rendering incoming video stream without MSA timing parameters", i.e., `allow_invalid_MSA_timing_params` is true. The condition was mistakenly removed by 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP"). CC: Mario Limonciello <mario.limonciello@amd.com> CC: Alex Hung <alex.hung@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3915 Fixes: 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-28drm/amdkfd: only flush the validate MES contexPrike Liang
The following page fault was observed duringthe KFD process release. In this particular error case, the HIP test (./MemcpyPerformance -h) does not require the queue. As a result, the process_context_addr was not assigned when the KFD process was released, ultimately leading to this page fault during the execution of the function kfd_process_dequeue_from_all_devices(). [345962.294891] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:153 vmid:0 pasid:0) [345962.295333] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [345962.295775] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00000B33 [345962.296097] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [345962.296394] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1 [345962.296633] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x1 [345962.296876] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x3 [345962.297135] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x1 [345962.297377] amdgpu 0000:03:00.0: amdgpu: RW: 0x0 [345962.297682] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:169 vmid:0 pasid:0) Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-28drm/amd/display: Correct register address in dcn35loanchen
[Why] the offset address of mmCLK5_spll_field_8 was incorrect for dcn35 which causes SSC not to be enabled. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Lo-An Chen <lo-an.chen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-28drm/amd/pm: Mark MM activity as unsupportedLijo Lazar
Aldebaran doesn't support querying MM activity percentage. Keep the field as 0xFFs to mark it as unsupported. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-28drm/amd/amdgpu: change the config of cgcg on gfx12Kenneth Feng
change the config of cgcg on gfx12 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.12.x
2025-01-28drm/amdkfd: Block per-queue reset when halt_if_hws_hang=1Jay Cornwall
The purpose of halt_if_hws_hang is to preserve GPU state for driver debugging when queue preemption fails. Issuing per-queue reset may kill wavefronts which caused the preemption failure. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.12.x
2025-01-28Merge tag 'driver-core-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the big set of driver core and debugfs updates for 6.14-rc1. Included in here is a bunch of driver core, PCI, OF, and platform rust bindings (all acked by the different subsystem maintainers), hence the merge conflict with the rust tree, and some driver core api updates to mark things as const, which will also require some fixups due to new stuff coming in through other trees in this merge window. There are also a bunch of debugfs updates from Al, and there is at least one user that does have a regression with these, but Al is working on tracking down the fix for it. In my use (and everyone else's linux-next use), it does not seem like a big issue at the moment. Here's a short list of the things in here: - driver core rust bindings for PCI, platform, OF, and some i/o functions. We are almost at the "write a real driver in rust" stage now, depending on what you want to do. - misc device rust bindings and a sample driver to show how to use them - debugfs cleanups in the fs as well as the users of the fs api for places where drivers got it wrong or were unnecessarily doing things in complex ways. - driver core const work, making more of the api take const * for different parameters to make the rust bindings easier overall. - other small fixes and updates All of these have been in linux-next with all of the aforementioned merge conflicts, and the one debugfs issue, which looks to be resolved "soon"" * tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits) rust: device: Use as_char_ptr() to avoid explicit cast rust: device: Replace CString with CStr in property_present() devcoredump: Constify 'struct bin_attribute' devcoredump: Define 'struct bin_attribute' through macro rust: device: Add property_present() saner replacement for debugfs_rename() orangefs-debugfs: don't mess with ->d_name octeontx2: don't mess with ->d_parent or ->d_parent->d_name arm_scmi: don't mess with ->d_parent->d_name slub: don't mess with ->d_name sof-client-ipc-flood-test: don't mess with ->d_name qat: don't mess with ->d_name xhci: don't mess with ->d_iname mtu3: don't mess wiht ->d_iname greybus/camera - stop messing with ->d_iname mediatek: stop messing with ->d_iname netdevsim: don't embed file_operations into your structs b43legacy: make use of debugfs_get_aux() b43: stop embedding struct file_operations into their objects carl9170: stop embedding file_operations into their objects ...
2025-01-28Merge tag 'ath-current-20250124' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patch for v6.14-rc Fix an issue in the ath12k driver where 6 GHz operation no longer works with new firmware.
generated by cgit (git 2.34.1) at 2025-08-01 15:54:09 +0000