summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-09-20bnxt_en: don't try to offload VLAN 'modify' actionDavide Caratti
bnxt offload code currently supports only 'push' and 'pop' operation: let .ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured. Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20regulator: fix crash caused by null driver dataYu Zhao
dev_set_drvdata() needs to be called before device_register() exposes device to userspace. Otherwise kernel crashes after it gets null pointer from dev_get_drvdata() when userspace tries to access sysfs entries. [Removed backtrace for length -- broonie] Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-09-20drm/amdkfd: Fix ATS capablity was not reported correctly on some APUsYong Zhao
Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we need to workaround this. For future compatibility, we also overwrite the bit in capability according to the value of needs_iommu_device. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9Yong Zhao
CWSR fails on Raven if the control stack is MTYPE_UC, which is used for regular GART mappings. As a workaround we map it using MTYPE_NC. The MEC firmware expects the control stack at one page offset from the start of the MQD so it is part of the MQD allocation on GFXv9. AMDGPU added a memory allocation flag just for this purpose. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7Amber Lin
A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20pinctrl: intel: Do pin translation in other GPIO operations as wellMika Westerberg
For some reason I thought GPIOLIB handles translation from GPIO ranges to pinctrl pins but it turns out not to be the case. This means that when GPIOs operations are performed for a pin controller having a custom GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets used internally. Fix this in the same way we did for lock/unlock IRQ operations and translate the GPIO number to pin before using it. Fixes: a60eac3239f0 ("pinctrl: intel: Allow custom GPIO base for pad groups") Reported-by: Rajat Jain <rajatja@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Rajat Jain <rajatja@google.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20Merge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fix from Christoph. * 'nvme-4.19' of git://git.infradead.org/nvme: nvme: count all ANA groups for ANA Log page
2018-09-20floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctlAndy Whitcroft
The final field of a floppy_struct is the field "name", which is a pointer to a string in kernel memory. The kernel pointer should not be copied to user memory. The FDGETPRM ioctl copies a floppy_struct to user memory, including this "name" field. This pointer cannot be used by the user and it will leak a kernel address to user-space, which will reveal the location of kernel code and data and undermine KASLR protection. Model this code after the compat ioctl which copies the returned data to a previously cleared temporary structure on the stack (excluding the name pointer) and copy out to userspace from there. As we already have an inparam union with an appropriate member and that memory is already cleared even for read only calls make use of that as a temporary store. Based on an initial patch by Brian Belleville. CVE-2018-7755 Signed-off-by: Andy Whitcroft <apw@canonical.com> Broke up long line. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20mlxsw: spectrum: Bump required firmware versionPetr Machata
MC-aware mode was introduced to mlxsw in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") and fixed up later in commit 3a3539cd3632 ("mlxsw: spectrum_buffers: Set up a dedicated pool for BUM traffic"). As the final piece of puzzle, a firmware issue whereby a wrong priority was assigned to BUM traffic was corrected in FW version 13.1703.4. Therefore require this FW version in the driver. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20libata: mask swap internal and hardware tagJens Axboe
hen we're comparing the hardware completion mask passed in from the driver with the internal tag pending mask, we need to account for the fact that the internal tag is different from the hardware tag. If not, then we can end up either prematurely completing the internal tag (since it's not set in the hw mask), or simply flag an error: ata2: illegal qc_active transition (100000000->00000001) If the internal tag is set, then swap that with the hardware tag in this case before comparing with what the hardware reports. Fixes: 28361c403683 ("libata: add extra internal command") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201151 Cc: stable@vger.kernel.org Reported-by: Paul Sbarra <sbarra.paul@gmail.com> Tested-by: Paul Sbarra <sbarra.paul@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20serial: imx: restore handshaking irq for imx1Uwe Kleine-König
Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA") Cc: stable <stable@vger.kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: typec: mux: Take care of driver module reference countingHeikki Krogerus
Functions typec_mux_get() and typec_switch_get() already make sure that the mux device reference count is incremented, but the same must be done to the driver module as well to prevent the drivers from being unloaded in the middle of operation. This fixes a potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: 93dd2112c7b2 ("usb: typec: mux: Get the mux identifier from function parameter") Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: core: safely deal with the dynamic quirk listsHarry Pan
Applying dynamic usbcore quirks in early booting when the slab is not yet ready would cause kernel panic of null pointer dereference because the quirk_count has been counted as 1 while the quirk_list was failed to allocate. i.e., [ 1.044970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.044995] IP: [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 [ 1.045016] PGD 0 [ 1.045026] Oops: 0000 [#1] PREEMPT SMP [ 1.046986] gsmi: Log Shutdown Reason 0x03 [ 1.046995] Modules linked in: [ 1.047008] CPU: 0 PID: 81 Comm: kworker/0:3 Not tainted 4.4.154 #28 [ 1.047016] Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.27.0 12/04/2017 [ 1.047028] Workqueue: usb_hub_wq hub_event [ 1.047037] task: ffff88017a321c80 task.stack: ffff88017a384000 [ 1.047044] RIP: 0010:[<ffffffffb0953ec7>] [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 To tackle this odd, let's balance the quirk_count to 0 when the kcalloc call fails, and defer the quirk setting into a lower level callback which ensures that the kernel memory management has been initialized. Fixes: 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Harry Pan <harry.pan@intel.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: roles: Take care of driver module reference countingHeikki Krogerus
This fixes potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") Cc: <stable@vger.kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: handle NULL config in usb_find_alt_setting()Alan Stern
usb_find_alt_setting() takes a pointer to a struct usb_host_config as an argument; it searches for an interface with specified interface and alternate setting numbers in that config. However, it crashes if the usb_host_config pointer argument is NULL. Since this is a general-purpose routine, available for use in many places, we want to to be more robust. This patch makes it return NULL whenever the config argument is NULL. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+19c3aaef85a89d451eac@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: fix error handling in usb_driver_claim_interface()Alan Stern
The syzbot fuzzing project found a use-after-free bug in the USB core. The bug was caused by usbfs not unbinding from an interface when the USB device file was closed, which led another process to attempt the unbind later on, after the private data structure had been deallocated. The reason usbfs did not unbind the interface at the appropriate time was because it thought the interface had never been claimed in the first place. This was caused by the fact that usb_driver_claim_interface() does not clean up properly when device_bind_driver() returns an error. Although the error code gets passed back to the caller, the iface->dev.driver pointer remains set and iface->condition remains equal to USB_INTERFACE_BOUND. This patch adds proper error handling to usb_driver_claim_interface(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+f84aa7209ccec829536f@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: remove LPM management from usb_driver_claim_interface()Alan Stern
usb_driver_claim_interface() disables and re-enables Link Power Management, but it shouldn't do either one, for the reasons listed below. This patch removes the two LPM-related function calls from the routine. The reason for disabling LPM in the analogous function usb_probe_interface() is so that drivers won't have to deal with unwanted LPM transitions in their probe routine. But usb_driver_claim_interface() doesn't call the driver's probe routine (or any other callbacks), so that reason doesn't apply here. Furthermore, no driver other than usbfs will ever call usb_driver_claim_interface() unless it is already bound to another interface in the same device, which means disabling LPM here would be redundant. usbfs doesn't interact with LPM at all. Lastly, the error return from usb_unlocked_disable_lpm() isn't handled properly; the code doesn't clean up its earlier actions before returning. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 8306095fd2c1 ("USB: Disable USB 3.0 LPM in critical sections.") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: usbdevfs: restore warning for nonsensical flagsOliver Neukum
If we filter flags before they reach the core we need to generate our own warnings. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: usbdevfs: sanitize flags moreOliver Neukum
Requesting a ZERO_PACKET or not is sensible only for output. In the input direction the device decides. Likewise accepting short packets makes sense only for input. This allows operation with panic_on_warn without opening up a local DOS. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+843efa30c8821bd69f53@syzkaller.appspotmail.com Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in ↵Sebastian Andrzej Siewior
service_outstanding_interrupt()" This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: musb: dsps: do not disable CPPI41 irq in driver teardownBin Liu
TI AM335x CPPI 4.1 module uses a single register bit for CPPI interrupts in both musb controllers. So disabling the CPPI irq in one musb driver breaks the other musb module. Since musb is already disabled before tearing down dma controller in musb_remove(), it is safe to not disable CPPI irq in musb_dma_controller_destroy(). Fixes: 255348289f71 ("usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20Merge tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtdGreg Kroah-Hartman
Boris writes: "- Fixes a bug in the ->read/write_reg() implementation of the m25p80 driver - Make sure of_node_get/put() calls are balanced in the partition parsing code - Fix a race in the denali NAND controller driver - Fix false positive WARN_ON() in the marvell NAND controller driver" * tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtd: mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able mtd: partitions: fix unbalanced of_node_get/put() mtd: rawnand: denali: fix a race condition when DMA is kicked mtd: rawnand: marvell: prevent harmless warnings
2018-09-20Merge tag 'sound-4.19-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Takashi writes: "sound fixes for 4.19-rc5 here comes a collection of various fixes, mostly for stable-tree or regression fixes. Two relatively high LOCs are about the (rather simple) conversion of uapi integer types in topology API, and a regression fix about HDMI hotplug notification on AMD HD-audio. The rest are all small individual fixes like ASoC Intel Skylake race condition, minor uninitialized page leak in emu10k1 ioctl, Firewire audio error paths, and so on." * tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits) ALSA: fireworks: fix memory leak of response buffer at error path ALSA: oxfw: fix memory leak of discovered stream formats at error path ALSA: oxfw: fix memory leak for model-dependent data at error path ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path ALSA: hda - Enable runtime PM only for discrete GPU ALSA: oxfw: fix memory leak of private data ALSA: firewire-tascam: fix memory leak of private data ALSA: firewire-digi00x: fix memory leak of private data sound: don't call skl_init_chip() to reset intel skl soc sound: enable interrupt after dma buffer initialization Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation" ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO ASoC: cs4265: fix MMTLR Data switch control ASoC: AMD: Ensure reset bit is cleared before configuring ALSA: fireface: fix memory leak in ff400_switch_fetching_mode() ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER ASoC: rsnd: adg: care clock-frequency size ASoC: uniphier: change status to orphan ASoC: rsnd: fixup not to call clk_get/set under non-atomic ...
2018-09-19qed: Add missing device config for RoCE EDPM in UFP mode.Sudarsana Reddy Kalluru
This patch adds support to configure the DORQ to use vlan-id/priority for roce EDPM. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19qed: Do not add VLAN 0 tag to untagged frames in multi-function mode.Sudarsana Reddy Kalluru
In certain multi-function switch dependent modes, firmware adds vlan tag 0 to the untagged frames. This leads to double tagging for the traffic if the dcbx is enabled, which is not the desired behavior. To avoid this, driver needs to set "dcb_dont_add_vlan0" flag. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19qed: Fix populating the invalid stag value in multi function mode.Sudarsana Reddy Kalluru
In multi-function mode, driver receives the stag value (outer vlan) for a PF from management FW (MFW). If the stag value is negotiated prior to the driver load, then the stag is not notified to the driver and hence driver will have the invalid stag value. The fix is to request the MFW for STAG value during the driver load time. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20drm/vmwgfx: Fix buffer object evictionThomas Hellstrom
Commit 19be55701071 ("drm/ttm: add operation ctx to ttm_bo_validate v2") introduced a regression where the vmwgfx driver refused to evict a buffer that was still busy instead of waiting for it to become idle. Fix this. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2018-09-20drm/vmwgfx: Don't impose STDU limits on framebuffer sizeDeepak Rawat
If framebuffers are larger, we create bounce surfaces that are within STDU limits. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-09-20drm/vmwgfx: limit mode size for all display unit to texture_maxDeepak Rawat
For all display units, limit mode size exposed to texture_max_width/ height as this is the maximum framebuffer size that virtual device can create. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-09-20drm/vmwgfx: limit screen size to stdu_max during check_modesetDeepak Rawat
For STDU individual screen target size is limited by SVGA_REG_SCREENTARGET_MAX_WIDTH/HEIGHT registers so add that limit during atomic check_modeset. An additional limit is placed in the update_layout ioctl to avoid requesting layouts that current user-space typically can't support. Also modified the comments to reflect current limitation on topology. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-09-20drm/vmwgfx: don't check for old_crtc_state enable statusDeepak Rawat
During atomic check to prepare the new topology no need to check if old_crtc_state was enabled or not. This will cause atomic_check to fail because due to connector routing a crtc can be in atomic_state even if there was no change to enable status. Detected this issue with igt run. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-09-19net: mvneta: fix the Rx desc buffer DMA unmappingAntoine Tenart
With CONFIG_DMA_API_DEBUG enabled we now get a warning when using the mvneta driver: mvneta d0030000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001165b000] [size=4096 bytes] [mapped as page] [unmapped as single] This is because when using the s/w buffer management, the Rx descriptor buffer is mapped with dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19drm/amdgpu: add new polaris pci idAlex Deucher
Add new pci id. Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-09-20Merge tag 'drm-intel-fixes-2018-09-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only fixes coming from gvt containing "Two more BXT fixes from Colin, one srcu locking fix and one fix for GGTT clear when destroy vGPU." Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919151915.GA6309@intel.com
2018-09-20Merge tag 'drm-misc-fixes-2018-09-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v4.19-rc5: - Fix crash in vgem in drm_drv_uses_atomic_modeset. - Allow atomic drivers that don't set DRIVER_ATOMIC to create debugfs entries. - Fix compiler warning for unused connector_funcs. - Fix null pointer deref on UDL unplug. - Disable DRM support for sun4i's R40 for now. (Not all patches went in for v4.19, so it has to wait a cycle.) - NULL-terminate the of_device_id table in pl111. - Make sure vc4 NV12 planar format works when displaying an unscaled fb. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dda393bb-f13f-8d36-711b-cacfc578e5a3@linux.intel.com
2018-09-19IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loopBart Van Assche
Use different loop variables for the inner and outer loop. This avoids that an infinite loop occurs if there are more RDMA channels than target->req_ring_size. Fixes: d92c0da71a35 ("IB/srp: Add multichannel support") Cc: <stable@vger.kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-19Merge tag 'hwmon-for-linus-v4.19-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Guenter writes: "Various bug fixes for nct6775 driver"
2018-09-19Merge tag 'scsi-fixes' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi James writes: "SCSI fixes on 20180919 A couple of small but important fixes, one affecting big endian and the other fixing a BUG_ON in scatterlist processing. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>"
2018-09-19xen: issue warning message when out of grant maptrack entriesJuergen Gross
When a driver domain (e.g. dom0) is running out of maptrack entries it can't map any more foreign domain pages. Instead of silently stalling the affected domUs issue a rate limited warning in this case in order to make it easier to detect that situation. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-09-19drm: sun4i: drop second PLL from A64 HDMI PHYIcenowy Zheng
The A64 HDMI PHY seems to be not able to use the second video PLL as clock parent in experiments. Drop the support for the second PLL from A64 HDMI PHY driver. Fixes: b46e2c9f5f64 ("drm/sun4i: Add support for A64 HDMI PHY") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-2-icenowy@aosc.io
2018-09-19Merge branch 'linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Crypto stuff from Herbert: "This push fixes a potential boot hang in ccp and an incorrect CPU capability check in aegis/morus on x86." * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/aegis,morus - Do not require OSXSAVE for SSE2 crypto: ccp - add timeout support in the SEV command
2018-09-19Merge tag 'platform-drivers-x86-v4.19-2' of ↵Greg Kroah-Hartman
git://git.infradead.org/linux-platform-drivers-x86 Darren writes: "platform-drivers-x86 for v4.19-2 Free allocated ACPI buffers in two drivers. The following is an automated git shortlog grouped by driver: alienware-wmi: - Correct a memory leak dell-smbios-wmi: - Correct a memory leak" * tag 'platform-drivers-x86-v4.19-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: alienware-wmi: Correct a memory leak platform/x86: dell-smbios-wmi: Correct a memory leak
2018-09-18sfp: fix oops with ethtool -mRussell King
If a network interface is created prior to the SFP socket being available, ethtool can request module information. This unfortunately leads to an oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = (ptrval) [00000008] *pgd=7c400831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1480 Comm: ethtool Not tainted 4.19.0-rc3 #138 Hardware name: Broadcom Northstar Plus SoC PC is at sfp_get_module_info+0x8/0x10 LR is at dev_ethtool+0x218c/0x2afc Fix this by not filling in the network device's SFP bus pointer until SFP is fully bound, thereby avoiding the core calling into the SFP bus code. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: mvpp2: fix a txq_done race conditionAntoine Tenart
When no Tx IRQ is available, the txq_done() routine (called from tx_done()) shouldn't be called from the polling function, as in such case it is already called in the Tx path thanks to an hrtimer. This mostly occurred when using PPv2.1, as the engine then do not have Tx IRQs. Fixes: edc660fa09e2 ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Reported-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18ravb: do not write 1 to reserved bitsKazuya Mizuguchi
EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: bnxt: Fix a uninitialized variable warning.zhong jiang
Fix the following compile warning: drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:49:5: warning: ‘nvm_param.dir_type’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (nvm_param.dir_type == BNXT_NVM_PORT_CFG) Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18Merge tag 'mlx5-fixes-2018-09-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-09-17 Sorry about the previous submission of this series which was mistakenly marked for net-next, here I am resending with 'net' mark. This series provides three fixes to mlx5 core and mlx5e netdevice driver. Please pull and let me know if there's any problem. For -stable v4.16: ('net/mlx5: Check for SQ and not RQ state when modifying hairpin SQ') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: emac: fix fixed-link setup for the RTL8363SB switchChristian Lamparter
On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Fixup the tail addr setting in xmit pathJose Abreu
Currently we are always setting the tail address of descriptor list to the end of the pre-allocated list. According to databook this is not correct. Tail address should point to the last available descriptor + 1, which means we have to update the tail address everytime we call the xmit function. This should make no impact in older versions of MAC but in newer versions there are some DMA features which allows the IP to fetch descriptors in advance and in a non sequential order so its critical that we set the tail address correctly. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: f748be531d70 ("stmmac: support new GMAC4") Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Rework coalesce timer and fix multi-queue racesJose Abreu
This follows David Miller advice and tries to fix coalesce timer in multi-queue scenarios. We are now using per-queue coalesce values and per-queue TX timer. Coalesce timer default values was changed to 1ms and the coalesce frames to 25. Tested in B2B setup between XGMAC2 and GMAC5. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: ce736788e8a ("net: stmmac: adding multiple buffers for TX") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 02:36:53 +0000