summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-08-15platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tabletyouling257
Add touchscreen info for the Cube KNote i1101 tablet. Reported-and-tested-by: lkongl <lkongl@163.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-15platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init()Wei Yongjun
The return value from platform_device_register_resndata() is not checked correctly. The test is done against a wrong variable. This patch fix it. Fixes: 0378123c5800 ("platform/x86: mlx-platform: Add mlxreg-fan platform driver activation") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-14Merge branches 'clk-actions-s700', 'clk-exynos-unused', ↵Stephen Boyd
'clk-qcom-dispcc-845', 'clk-scmi-round' and 'clk-cs2000-spdx' into clk-next * clk-actions-s700: : - Actions Semi Owl series S700 SoC clk driver clk: actions: Add S700 SoC clock support dt-bindings: clock: Add S700 support for Actions Semi Soc's clk: actions: Add missing REGMAP_MMIO dependency * clk-exynos-unused: : - Remove an unused variable from Exynos4412 ISP driver clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable * clk-qcom-dispcc-845: : - Qualcomm SDM845 display clock controller clk: qcom: Add display clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Display clock bindings clk: qcom: Move frequency table macro to common file * clk-scmi-round: : - Fix a thinko bug in SCMI clk division logic clk: scmi: Fix the rounding of clock rate * clk-cs2000-spdx: clk: cs2000-cp: convert to SPDX identifiers
2018-08-14Merge branches 'clk-imx6-ocram', 'clk-missing-put', ↵Stephen Boyd
'clk-tegra-sdmmc-jitter', 'clk-allwinner' and 'clk-uniphier' into clk-next * clk-imx6-ocram: : - i.MX6SX ocram_s clk support clk: imx: add ocram_s clock for i.mx6sx * clk-missing-put: : - Add missing of_node_put()s in some i.MX clk drivers clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() * clk-tegra-sdmmc-jitter: : - Tegra SDMMC clk jitter improvements with high speed signaling modes clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() * clk-allwinner: clk: sunxi-ng: add A64 compatible string dt-bindings: add compatible string for the A64 DE2 CCU clk: sunxi-ng: r40: Export video PLLs clk: sunxi-ng: r40: Allow setting parent rate to display related clocks clk: sunxi-ng: r40: Add minimal rate for video PLLs * clk-uniphier: : - Uniphier NAND, USB3 PHY, and SPI clk support clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock
2018-08-14Merge branches 'clk-qcom-rpmh', 'clk-qcom-spdx', 'clk-con-id-leak', ↵Stephen Boyd
'clk-fixed-factor-populated' and 'clk-mvebu-periph-parent' into clk-next * clk-qcom-rpmh: : - Qualcomm RPMh clk driver clk: qcom: clk-rpmh: Add QCOM RPMh clock driver * clk-qcom-spdx: : - SPDX tagging for qcom clk: qcom: Update SPDX headers for common files * clk-con-id-leak: : - Stop leaking con ids in __clk_put() clk: core: Potentially free connection id * clk-fixed-factor-populated: : - Fix a corner case in fixed factor clk probing where node is in DT but : parent clk is registered much later clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure * clk-mvebu-periph-parent: : - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value clk: mvebu: armada-37xx-periph: Remove unused var num_parents clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
2018-08-14Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', ↵Stephen Boyd
'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next * clk-mvebu-spdx: clk: mvebu: armada-37xx-periph: switch to SPDX license identifier * clk-meson: clk: meson: add gen_clk clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition clk: meson-axg: add clocks required by pcie driver clk: meson: remove unused clk-audio-divider driver clk: meson: stop rate propagation for audio clocks clk: meson: axg: add the audio clock controller driver clk: meson: add axg audio sclk divider driver clk: meson: add triple phase clock driver clk: meson: add clk-phase clock driver clk: meson: clean-up meson clock configuration clk: meson: remove obsolete register access clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings clk: meson: audio-divider is one based clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL * clk-imx7d-mu: : - i.MX7D mailbox clk support clk: imx7d: add IMX7D_MU_ROOT_CLK * clk-imx-init-array-cleanup: : - i.MX clk init arrays removed in place of CLK_IS_CRITICAL clk: imx6sx: remove clks_init_on array clk: imx6sl: remove clks_init_on array clk: imx6q: remove clks_init_on array * clk-rockchip: clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: rockchip: fix clk_i2sout parent selection bits on rk3399 clk: rockchip: add clock controller for px30 clk: rockchip: add support for half divider dt-bindings: add bindings for px30 clock controller clk: rockchip: add dt-binding header for px30
2018-08-14Merge branches 'clk-imx-critical', 'clk-tegra-bpmp', 'clk-tegra-124', ↵Stephen Boyd
'clk-tegra-critical' and 'clk-tegra-emc-oob' into clk-next * clk-imx-critical: : - Convert to CLK_IS_CRITICAL for i.MX51/53 driver clk: imx51-imx53: Include sizes.h to silence compile errors clk: imx51-imx53: Annotate critical clocks as CLK_IS_CRITICAL * clk-tegra-bpmp: : - Fix Tegra BPMP driver oops when some xlating a NULL clk clk: tegra: bpmp: Don't crash when a clock fails to register * clk-tegra-124: : - Proper default configuration for vic03 and vde clks on Tegra124 clk: tegra: Make vde a child of pll_c3 clk: tegra: Make vic03 a child of pll_c3 * clk-tegra-critical: : - Mark Tegra memory controller clks as critical clk: tegra: Mark Memory Controller clock as critical * clk-tegra-emc-oob: : - Fix array bounds clamp in Tegra's emc determine_rate() op clk: tegra: emc: Avoid out-of-bounds bug
2018-08-14Merge branches 'clk-ingenic-fixes', 'clk-max9485', 'clk-pxa-32k-pll', ↵Stephen Boyd
'clk-aspeed' and 'clk-imx6sll-gpio' into clk-next * clk-ingenic-fixes: : - Ingenic i2s bit update and allow UDC clk to gate clk: ingenic: Add missing flag for UDC clock clk: ingenic: Fix incorrect data for the i2s clock * clk-max9485: : - Maxim 9485 Programmable Clock Generator clk: Add driver for MAX9485 dts: clk: add devicetree bindings for MAX9485 * clk-pxa-32k-pll: : - Expose 32 kHz PLL on PXA SoCs clk: pxa: export 32kHz PLL * clk-aspeed: : - Fix name of aspeed SDC clk define to have only one 'CLK' clk: aspeed: Fix SDCLK name * clk-imx6sll-gpio: : - imx6sll GPIO clk gate support clk: imx6sll: add GPIO LPCGs
2018-08-14Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals', ↵Stephen Boyd
'clk-renesas', 'clk-stratix10-fixes' and 'clk-atmel-i2s' into clk-next * clk-imx6-video-parent: : - Fix i.MX6QDL video clk parent clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL * clk-qcom-sdm845-criticals: : - critical clk markings for qcom SDM845 clk: qcom: Enable clocks which needs to be always on for SDM845 * clk-renesas: clk: renesas: Renesas R9A06G032 clock driver dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation dt-bindings: clock: Add the r9a06g032-sysctrl.h file clk: renesas: r8a7795: Add CCREE clock clk: renesas: r8a7795: Add CR clock * clk-stratix10-fixes: : - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents clk: socfpga: stratix10: fix the sdmmc_free_clk mux clk: socfpga: stratix10: fix the parents of mpu_free_clk * clk-atmel-i2s: : - Atmel at91 I2S audio clk support clk: at91: add I2S clock mux driver dt-bindings: clk: at91: add an I2S mux clock
2018-08-14Merge branches 'clk-qcom-set-rate-gate', 'clk-core-set-rate-gate', ↵Stephen Boyd
'clk-core-duty-cycle', 'clk-si-prepare' and 'clk-imx-gpio-gates' into clk-next * clk-qcom-set-rate-gate: clk: qcom: drop CLK_SET_RATE_GATE from sdc clocks * clk-core-set-rate-gate: clk: fix CLK_SET_RATE_GATE with clock rate protection * clk-core-duty-cycle: clk: add duty cycle support * clk-si-prepare: : - SI544/SI514 clk on/off support clk-si514, clk-si544: Implement prepare/unprepare/is_prepared operations * clk-imx-gpio-gates: : - i.MX6UL GPIO clock gates in CCM CCGR clk: imx6ul: remove clks_init_on array clk: imx6ul: add GPIO clock gates dt-bindings: clock: imx6ul: Do not change the clock definition order
2018-08-15mailbox: Add support for i.MX messaging unitOleksij Rempel
The i.MX Messaging Unit is a two side block which allows applications implement communication over this sides. The MU includes the following features: - Messaging control by interrupts or by polling - Four general-purpose interrupt requests reflected to the other side - Three general-purpose flags reflected to the other side - Four receive registers with maskable interrupt - Four transmit registers with maskable interrupt Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.cRandy Dunlap
Fix missing MODULE_LICENSE() in mtk-cmdq-mailbox.c: WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox/mtk-cmdq-mailbox.o Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: <linux-mediatek@lists.infradead.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-14PCI: Limit config space size for Netronome NFP5000Jakub Kicinski
Like the NFP4000 and NFP6000, the NFP5000 as an erratum where reading/ writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP5000's PF's config space size to 0x600 bytes as is already done for the NFP4000 and NFP6000. The NFP5000's VF is 0x6003 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same device ID as the NFP6000's VF. Thus, its config space is already limited by the existing use of quirk_nfp6000(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tony Egan <tony.egan@netronome.com>
2018-08-14Merge tag 'for-linus-4.19-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - add dma-buf functionality to Xen grant table handling - fix for booting the kernel as Xen PVH dom0 - fix for booting the kernel as a Xen PV guest with CONFIG_DEBUG_VIRTUAL enabled - other minor performance and style fixes * tag 'for-linus-4.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix balloon initialization for PVH Dom0 xen: don't use privcmd_call() from xen_mc_flush() xen/pv: Call get_cpu_address_sizes to set x86_virt/phys_bits xen/biomerge: Use true and false for boolean values xen/gntdev: don't dereference a null gntdev_dmabuf on allocation failure xen/spinlock: Don't use pvqspinlock if only 1 vCPU xen/gntdev: Implement dma-buf import functionality xen/gntdev: Implement dma-buf export functionality xen/gntdev: Add initial support for dma-buf UAPI xen/gntdev: Make private routines/structures accessible xen/gntdev: Allow mappings for DMA buffers xen/grant-table: Allow allocating buffers suitable for DMA xen/balloon: Share common memory reservation routines xen/grant-table: Make set/clear page private code shared
2018-08-14Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "A bunch of good stuff in here. Worth noting is that we've pulled in the x86/mm branch from -tip so that we can make use of the core ioremap changes which allow us to put down huge mappings in the vmalloc area without screwing up the TLB. Much of the positive diffstat is because of the rseq selftest for arm64. Summary: - Wire up support for qspinlock, replacing our trusty ticket lock code - Add an IPI to flush_icache_range() to ensure that stale instructions fetched into the pipeline are discarded along with the I-cache lines - Support for the GCC "stackleak" plugin - Support for restartable sequences, plus an arm64 port for the selftest - Kexec/kdump support on systems booting with ACPI - Rewrite of our syscall entry code in C, which allows us to zero the GPRs on entry from userspace - Support for chained PMU counters, allowing 64-bit event counters to be constructed on current CPUs - Ensure scheduler topology information is kept up-to-date with CPU hotplug events - Re-enable support for huge vmalloc/IO mappings now that the core code has the correct hooks to use break-before-make sequences - Miscellaneous, non-critical fixes and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits) arm64: alternative: Use true and false for boolean values arm64: kexec: Add comment to explain use of __flush_icache_range() arm64: sdei: Mark sdei stack helper functions as static arm64, kaslr: export offset in VMCOREINFO ELF notes arm64: perf: Add cap_user_time aarch64 efi/libstub: Only disable stackleak plugin for arm64 arm64: drop unused kernel_neon_begin_partial() macro arm64: kexec: machine_kexec should call __flush_icache_range arm64: svc: Ensure hardirq tracing is updated before return arm64: mm: Export __sync_icache_dcache() for xen-privcmd drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory arm64: Add support for STACKLEAK gcc plugin arm64: Add stack information to on_accessible_stack drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported arm64: fix ACPI dependencies rseq/selftests: Add support for arm64 arm64: acpi: fix alignment fault in accessing ACPI efi/arm: map UEFI memory map even w/o runtime services enabled efi/arm: preserve early mapping of UEFI memory map longer for BGRT drivers: acpi: add dependency of EFI for arm64 ...
2018-08-14IB/core: Avoid confusing del_netdev_default_ipsParav Pandit
Currently bond_delete_netdev_default_gids() is called by two callers. (a) del_netdev_default_ips_join() (b) del_netdev_default_ips() Both above functions changes the argument order while calling bond_delete_netdev_default_gids(). This required silly del_netdev_default_ips() wrapper. Additionally, del_netdev_default_ips() deletes default GIDs not IP based GIDs. del_netdev_default_ips() having _ips suffix is confusing. Therefore, get rid of confusing del_netdev_default_ips() and simplify bond_delete_netdev_default_gids() to follow same argument order as its caller. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14IB/core: Add comment for change upper netevent handlingParav Pandit
Add comment for handling CHANGEUPPER netevent handling. To improve code readability, (a) move cmd definitions to its respective if-else branches, (b) avoid single line structure definitions. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14qedr: Add user space support for SRQYuval Bason
This patch adds support for SRQ's created in user space and update qedr_affiliated_event to deal with general SRQ events. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Yuval Bason <yuval.bason@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14qedr: Add support for kernel mode SRQ'sYuval Bason
Implement the SRQ specific verbs and update the poll_cq verb to deal with SRQ completions. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Yuval Bason <yuval.bason@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14qedr: Add wrapping generic structure for qpidr and adjust idr routines.Yuval Bason
Today, we are using idr mechanism for QP's only. This patch prepares the qedr_idr stuctures and the idr routines for both QP's and SRQ's. Signed-off-by: Yuval Bason <yuval.bason@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-15ubi: expose the volume CRC check skip flagQuentin Schulz
Now that we have the logic for skipping CRC check for static UBI volumes in the core, let's expose it to users. This makes use of a padding byte in the volume description data structure as a flag. This flag only tell for now whether we should skip the CRC check of a volume. This checks the UBI volume for which we are trying to skip the CRC check is static. Let's also make sure that the flags passed to verify_mkvol_req are valid. We voluntarily do not take into account the skip_check flag in vol_cdev_write() as we want to make sure what we wrote was correctly written. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: provide a way to skip CRC checksQuentin Schulz
Some users of static UBI volumes implement their own integrity check, thus making the volume CRC check done at open time useless. For instance, this is the case when one use the ubiblock + dm-verity + squashfs combination, where dm-verity already checks integrity of the block device but this time at the block granularity instead of verifying the whole volume. Skipping this test drastically improves the boot-time. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15cpuidle: menu: Fix white spaceRafael J. Wysocki
Fix some damaged white space in menu_select(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-15ubi: Initialize Fastmap checkmapping correctlyRichard Weinberger
We cannot do it last, otherwithse it will be skipped for dynamic volumes. Reported-by: Lachmann, Juergen <juergen.lachmann@harman.com> Fixes: 34653fd8c46e ("ubi: fastmap: Check each mapping only once") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-14ACPI / PMIC: CrystalCove: Extend PMOP support to support all possible fieldsHans de Goede
Prior to this commit the CRC PMOP handler only supported the X285 and V18X PMOP fields. Leading to errors like these on device using the VBUS field: [ 765.766489] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [UserDefinedRegion] (20180531/evregion-266) [ 765.766526] ACPI Error: Method parse/execution failed \_SB.I2C1.BATC._BST, AE_BAD_PARAMETER (20180531/psparse-516) [ 765.766586] ACPI Error: AE_BAD_PARAMETER, Evaluating _BST (20180531/battery-577) This commit adds support for all known fields to the CRC PMOP OpRegion handler, the name and register info in this commit comes from: https://github.com/01org/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/0002-ACPI-Adding-support-for-WC-and-CRC-opregion.patch Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Clear status of all events when entering sleep statesRafael J. Wysocki
Commit fa85015c0d95 (ACPICA: Clear status of all events when entering S5) made the sleep state entry code in ACPICA clear the status of all ACPI events when entering S5 to fix a functional regression reported against commit 18996f2db918 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume). However, it is reported now that the regression also affects system states other than S5 on some systems and causes them to wake up from sleep prematurely. For this reason, make the code in question clear the status of all ACPI events when entering all sleep states (in addition to S5) to avoid the premature wakeups (this may cause some wakeup events to be missed in theory, but the likelihood of that is small and the change here simply restores the previous behavior of the code). Fixes: 18996f2db918 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume) Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+: fa85015c0d95 ACPICA: Clear status ... Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: acpiexec: fix a small memory leak regressionBob Moore
Eliminates warnings only seen when acpiexec exits. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Reference count: add additional debugging detailsErik Schmauss
Make reference counting diagnostics provide more information on what has happened. Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: acpi_exec: fixing -fi optionErik Schmauss
Field elements listed in the init file used to be initialized after the table load and before executing module-level code blocks. The recent changes in module-level code mean that the table load becomes a method execution. If fields are used within module-level code and we are executing with -fi option, then these values are populated after the table has finished loading. This commit changes the initialization of objects listed in the init file so that field unit values are populated during the table load. Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Debugger: Cleanup interface to the AML disassemblerBob Moore
If the disassembler is configured out (such as when the debugger is part of a kernel), these debugger commands are disabled: List Disassemble Further, the Debug (single-step) command is simplified because each line of code cannot be disassembled. Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: AML Parser: skip opcodes that open a scope upon parse failureErik Schmauss
This change skips the entire length of opcodes that open a scope (Device, Scope, Processor, etc) if the creation of the op fails. The failure could be caused by various errors including AE_ALREADY_EXISTS and AE_NOT_FOUND. Reported-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Utilities: split hex detection into smaller functionsErik Schmauss
acpi_ut_implicit_strtoul64() called acpi_ut_detect_hex_prefix() and ignored the return value. Instead, use acpi_ut_remove_hex_prefix(). Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Update an error message for a duplicate tableBob Moore
In this case, the exception AE_ALREADY_EXISTS is more appropriate. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: ACPICA: add status check for acpi_hw_read before assigning return valueErik Schmauss
The value coming from acpi_hw_read() should not be used if it returns an error code, so check the status returned by it before using that value in two places in acpi_hw_register_read(). Reported-by: Mark Gross <mark.gross@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML ↵Erik Schmauss
during table load Macros to classify different AML exception codes have been added in order to ignore the exceptions, Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> [ rjw: Fix damaged white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14rtc: s5m: Add SPDX license identifierKrzysztof Kozlowski
Replace GPL v2.0+ license statement with SPDX license identifier. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-14rtc: maxim: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-14IB/mlx5: Fix leaking stack memory to userspaceJason Gunthorpe
mlx5_ib_create_qp_resp was never initialized and only the first 4 bytes were written. Fixes: 41d902cb7c32 ("RDMA/mlx5: Fix definition of mlx5_ib_create_qp_resp") Cc: <stable@vger.kernel.org> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14rtc: isl1208: set ev-evienb bit from device treeDenis Osterland
Add support to disable event in pull-up. Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-14PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchipsHeiner Kallweit
If flag IRQCHIP_ONESHOT_SAFE isn't set for an irqchip and we have a threaded interrupt with no primary handler, flag IRQF_ONESHOT needs to be set for the interrupt, causing some overhead in the threaded interrupt handler. For more detailed explanation also check following comment in __setup_irq(): The interrupt was requested with handler = NULL, so we use the default primary handler for it. But it does not have the oneshot flag set. In combination with level interrupts this is deadly, because the default primary handler just wakes the thread, then the irq lines is reenabled, but the device still has the level irq asserted. Rinse and repeat.... While this works for edge type interrupts, we play it safe and reject unconditionally because we can't say for sure which type this interrupt really has. The type flags are unreliable as the underlying chip implementation can override them. Another comment in __setup_irq() gives a hint already that this overhead can be avoided for PCI-MSI: Some irq chips like MSI based interrupts are per se one shot safe. Check the chip flags, so we can avoid the unmask dance at the end of the threaded handler for those. Following this let's mark all PCI-MSI irqchips as oneshot-safe. See also discussion here: https://lkml.kernel.org/r/alpine.DEB.2.21.1808032136490.1658@nanos.tec.linutronix.de Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-14Merge tag 'sound-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It's been busy summer weeks and hence lots of changes, partly for a few new drivers and partly for a wide range of fixes. Here are highlights: ALSA Core: - Fix rawmidi buffer management, code cleanup / refactoring - Fix the SG-buffer page handling with incorrect fallback size - Fix the stall at virmidi trigger callback with a large buffer; also offloading and code-refactoring along with it - Various ALSA sequencer code cleanups ASoC: - Deploy the standard snd_pcm_stop_xrun() helper in several drivers - Support for providing name prefixes to generic component nodes - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing - Generalization of the DIO2125 support to a simple amplifier driver - Accessory detection support for the audio graph card - DT support for PXA AC'97 devices - Quirks for a number of new x86 systems - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707 HD-audio: - Code refactoring in HD-audio ext codec codes to drop own classes; preliminary works for the upcoming legacy codec support - Generalized DRM audio component for the upcoming radeon / amdgpu support - Unification of mic mute-LED and GPIO support for various codecs - Further improvement of CA0132 codec support including Recon3D - Proper vga_switcheroo handling for AMD i-GPU - Update of model list in documentation - Fixups for another HP Spectre x360, Conexant codecs, power-save blacklist update USB-audio: - Fix the invalid sample rate setup with external clock - Support of UAC3 selector units and processing units - Basic UAC3 power-domain support - Support for Encore mDSD and Thesycon-based DSD devices - Preparation for future complete callback changes Firewire: - Add support for MOTU Traveler Misc: - The endianess notation fixes in various drivers - Add fall-through comment in lots of drivers - Various sparse warning fixes, e.g. about PCM format types" * tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits) ASoC: adav80x: mark expected switch fall-through ASoC: da7219: Add delays to capture path to remove DC offset noise ALSA: usb-audio: Mark expected switch fall-through ALSA: mixart: Mark expected switch fall-through ALSA: opl3: Mark expected switch fall-through ALSA: hda/ca0132 - Add exit commands for Recon3D ALSA: hda/ca0132 - Change mixer controls for Recon3D ALSA: hda/ca0132 - Add Recon3D input and output select commands ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D ALSA: hda/ca0132 - Add Recon3D startup functions and setup ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio ALSA: hda/ca0132 - Add Recon3D pincfg ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D ALSA: hda/ca0132 - Add alt_functions unsolicited response ALSA: hda/ca0132 - Clean up ca0132_init function. ALSA: hda/ca0132 - Create mmio gpio function to make code clearer ASoC: wm_adsp: Make DSP name configurable by codec driver ASoC: wm_adsp: Declare firmware controls from codec driver ASoC: max98373: Added software reset register to readable registers ASoC: wm_adsp: Correct DSP pointer for preloader control ...
2018-08-14PCI/VPD: Check for VPD access completion before checking for timeoutBert Kenward
Previously we checked the timeout before checking the VPD access completion bit. On a very heavily loaded system this can cause VPD access to timeout. Check the completion bit before checking the timeout. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-14rtc: isl1208: Add "evdet" interrupt source for isl1219Denis Osterland
Add support for "evdet" named interrupt source. The check if i2c client irq matches evdet irq is needed for the case that there is only one interrupt named "evdet". In this case i2c client code handles this like an unnamed interrupt souce and assigns the value. Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com> Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-14PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entryAndy Shevchenko
There are a lot of examples in the kernel where PCI_VDEVICE() is used and still looks not so convenient due to additional driver_data field attached. Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest possible form. For example, before: { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, after: { PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_mrfld_properties) }, Drivers can be converted later on in independent way. While here, remove the unused macro with the same name from Ralink wireless driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for rt2x00
2018-08-14rtc: isl1208: add support for isl1219 with tamper detectionMichael Grzeschik
We add support for the ISL1219 chip that got an integrated tamper detection function. This patch implements the feature by adding an additional timestamp0 file to sysfs device path. This file contains seconds since epoch, if an event occurred, or is empty, if none occurred. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-14rtc: sysfs: facilitate attribute add to rtc deviceDenis Osterland
This patches addresses following problem: rtc_allocate_device devm_device_add_group <-- kernel oops / null pointer, because sysfs entry does not yet exist rtc_register_device rc = devm_device_add_group if (rc) return rc; <-- forbidden to return error code after device register This patch adds rtc_add_group(s) functions. The functions store the sum of attribute groups as device resource. Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-14Merge tag 'acpi-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These revert two ACPICA commits that are not needed any more, rework the property graphs support in ACPI to be more aligned with the analogous DT code, add some new quirks and remove one that isn't needed any more, add a special platform driver to enumerate multiple I2C devices hooked up to the same device object in the ACPI tables and update the battery and button drivers. Specifics: - Revert two ACPICA commits that are not needed any more (Erik Schmauss). - Rework property graph support in the ACPI device properties framework to make it behave more like the analogous DT code and update the documentation of it (Sakari Ailus). - Change the default ACPI device status after initialization to ACPI_STA_DEFAULT instead of 0 (Hans de Goede). - Add a special platform driver for enumerating multiple I2C devices hooked up to the same object in the ACPI tables (Hans de Goede). - Fix the ACPI battery driver to avoid reporting full capacity on systems without support for that and clean it up (Hans de Goede, Dmitry Rozhkov, Lucas Rangit Magasweran). - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika Westerberg). - Add the touchscreen on Dell Venue Pro 7139 to the list of "always present" devices to make it work (Tristian Celestin). - Revert a special tables handling quirk for Dell XPS 9570 and Precision M5530 which is not needed any more (Kai Heng Feng). - Add support for a new OEM _OSI string to allow system vendors to work around issues with NVidia HDMI audio (Alex Hung). - Prevent the ACPI button driver from reporting excessive system wakeup events and clean it up (Ravi Chandra Sadineni, Randy Dunlap). - Clean up two minor code style issues in the ACPI core and GHES handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)" * tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) platform/x86: Add ACPI i2c-multi-instantiate pseudo driver ACPI / x86: utils: Remove status workaround from acpi_device_always_present() ACPI / scan: Create platform device for fwnodes with multiple i2c devices ACPI / scan: Initialize status to ACPI_STA_DEFAULT ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th ACPI: bus: Fix a pointer coding style issue arm64 / ACPI: clean the additional checks before calling ghes_notify_sea() ACPI / scan: Add static attribute to indirect_io_hosts[] ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd ACPI / battery: get rid of negations in conditions ACPI / battery: use specialized print macros ACPI / battery: reorder headers alphabetically ACPI / battery: drop inclusion of init.h ACPI: battery: remove redundant old_present check on insertion ACPI: property: graph: Update graph documentation to use generic references ACPI: property: graph: Improve graph documentation for port/ep numbering ACPI: property: graph: Fix graph documentation ACPI: property: Update documentation for hierarchical data extension 1.1 ACPI: property: Document key numbering for hierarchical data extension refs ...
2018-08-14Merge tag 'pm-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new framework for CPU idle time injection, to be used by all of the idle injection code in the kernel in the future, fix some issues and add a number of relatively small extensions in multiple places. Specifics: - Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring)" * tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function x86/power/hibernate_64: Remove VLA usage cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. ...
2018-08-14Merge tag 'leds-for-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "LED triggers improvements make the biggest part of this pull request. The most striking ones, that allowed for nice cleanups in the triggers are: - centralized handling of creation and removal of trigger sysfs attributes via attribute group - addition of module_led_trigger() helper The other things that need to be mentioned: New features and improvements to existing LED class drivers: - lt3593: add DT support, switch to gpiod interface - lm3692x: support LED sync configuration, change OF calls to fwnode calls - apu: modify PC Engines apu/apu2 driver to support apu3 Change in the drivers/net/can/led.c: - mark led trigger as broken since it's in the way for the further cleanups. It implements a subset of the netdev trigger and an Ack is needed from someone who can actually test and confirm that the netdev trigger works for can devices" * tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (32 commits) leds: ns2: Change unsigned to unsigned int usb: simplify usbport trigger leds: gpio trigger: simplifications from core changes leds: backlight trigger: simplifications from core changes leds: activity trigger: simplifications from core changes leds: default-on trigger: make use of module_led_trigger() leds: heartbeat trigger: simplifications from core changes leds: oneshot trigger: simplifications from core changes leds: transient trigger: simplifications from core changes leds: timer trigger: simplifications from core changes leds: netdev trigger: simplifications from core changes leds: triggers: new function led_set_trigger_data() leds: triggers: define module_led_trigger helper leds: triggers: handle .trigger_data and .activated() in the core leds: triggers: add device attribute support leds: triggers: let struct led_trigger::activate() return an error code leds: triggers: make the MODULE_LICENSE string match the actual license leds: lm3692x: Support LED sync configuration dt: bindings: lm3692x: Update binding for LED sync control leds: lm3692x: Change DT calls to fwnode calls ...
2018-08-14Merge tag 'devicetree-for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Remove an obsolete hack for PPC32 longtrail systems - Make of_io_request_and_map() "name" arg optional - Add vendor prefixes for bitmain, Asus, and Y Soft - Remove 'interrupt-parent' from bindings as it is implicit - New properties for wm8994 audio codec - Add 'clocks' property support to SRAM binding - Add binding for ASPEED coprocessor interrupt controller - Various binding spelling and link fixes * tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Documentation: remove dynamic-resolution-notes reference to non-existent file dt-bindings: Add Y Soft Corporation vendor prefix of/fdt: Remove PPC32 longtrail hack in memory scan dt-bindings: remove 'interrupt-parent' from bindings pinctrl: tegra: fix spelling in devicetree binding document usb: dwc3: rockchip: Fix PHY documentation links. dt-bindings: sound: wm8994: document wlf,csnaddr-pd property dt-bindings: sound: wm8994: document wlf,spkmode-pu property dt-bindings: sram: Add 'clocks' as an optional property dt-bindings: Add vendor prefix for AsusTek Computer Inc. dt-bindings: misc: ASPEED coprocessor interrupt controller dt-bindings: gpio: pca953x: Document interrupts, update example drivers/of: Make of_io_request_and_map() "name" argument optional dt-bindings: Add bitmain vendor prefix Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"
generated by cgit (git 2.34.1) at 2025-09-19 07:30:58 +0000