summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-01-16bcma: Fix 'allmodconfig' and BCMA builds on MIPS targetsGuenter Roeck
Mips builds with BCMA host mode enabled fail in mainline and -next with: In file included from include/linux/bcma/bcma.h:10:0, from drivers/bcma/bcma_private.h:9, from drivers/bcma/main.c:8: include/linux/bcma/bcma_driver_pci.h:218:24: error: field 'pci_controller' has incomplete type Bisect points to commit d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as generic") as the culprit. Analysis shows that the commmit changes PCI configuration and enables PCI_DRIVERS_GENERIC. This in turn disables PCI_DRIVERS_LEGACY. 'struct pci_controller' is, however, only defined if PCI_DRIVERS_LEGACY is enabled. Ultimately that means that BCMA_DRIVER_PCI_HOSTMODE depends on PCI_DRIVERS_LEGACY. Add the missing dependency. Fixes: d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as ...") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hogan <jhogan@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: James Hogan <jhogan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-16ibmvnic: Fix pending MAC address changesThomas Falcon
Due to architecture limitations, the IBM VNIC client driver is unable to perform MAC address changes unless the device has "logged in" to its backing device. Currently, pending MAC changes are handled before login, resulting in an error and failure to change the MAC address. Moving that chunk to the end of the ibmvnic_login function, when we are sure that it was successful, fixes that. The MAC address can be changed when the device is up or down, so only check if the device is in a "PROBED" state before setting the MAC address. Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16can: peak: fix potential bug in packet fragmentationStephane Grosjean
In some rare conditions when running one PEAK USB-FD interface over a non high-speed USB controller, one useless USB fragment might be sent. This patch fixes the way a USB command is fragmented when its length is greater than 64 bytes and when the underlying USB controller is not a high-speed one. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-01-15RDMA/mlx5: Fix out-of-bound access while querying AHLeon Romanovsky
The rdma_ah_find_type() accesses the port array based on an index controlled by userspace. The existing bounds check is after the first use of the index, so userspace can generate an out of bounds access, as shown by the KASN report below. ================================================================== BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0 Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409 CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xe9/0x18f print_address_description+0xa2/0x350 kasan_report+0x3a5/0x400 to_rdma_ah_attr+0xa8/0x3b0 mlx5_ib_query_qp+0xd35/0x1330 ib_query_qp+0x8a/0xb0 ib_uverbs_query_qp+0x237/0x7f0 ib_uverbs_write+0x617/0xd80 __vfs_write+0xf7/0x500 vfs_write+0x149/0x310 SyS_write+0xca/0x190 entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x7fe9c7a275a0 RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0 RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003 RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018 R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000 R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560 Allocated by task 1: __kmalloc+0x3f9/0x430 alloc_mad_private+0x25/0x50 ib_mad_post_receive_mads+0x204/0xa60 ib_mad_init_device+0xa59/0x1020 ib_register_device+0x83a/0xbc0 mlx5_ib_add+0x50e/0x5c0 mlx5_add_device+0x142/0x410 mlx5_register_interface+0x18f/0x210 mlx5_ib_init+0x56/0x63 do_one_initcall+0x15b/0x270 kernel_init_freeable+0x2d8/0x3d0 kernel_init+0x14/0x190 ret_from_fork+0x24/0x30 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff880019ae2000 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 104 bytes to the right of 512-byte region [ffff880019ae2000, ffff880019ae2200) The buggy address belongs to the page: page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc >ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Disabling lock debugging due to kernel taint Cc: <stable@vger.kernel.org> Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-15sh_eth: fix dumping ARSTRSergei Shtylyov
ARSTR is always located at the start of the TSU register region, thus using add_reg() instead of add_tsu_reg() in __sh_eth_get_regs() to dump it causes EDMR or EDSR (depending on the register layout) to be dumped instead of ARSTR. Use the correct condition/macro there... Fixes: 6b4b4fead342 ("sh_eth: Implement ethtool register dump operations") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: cs89x0: add MODULE_LICENSEArnd Bergmann
This driver lacks a MODULE_LICENSE tag, leading to a Kbuild warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/cirrus/cs89x0.o This adds license, author, and description according to the comment block at the start of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15ppp: unlock all_ppp_mutex before registering deviceGuillaume Nault
ppp_dev_uninit(), which is the .ndo_uninit() handler of PPP devices, needs to lock pn->all_ppp_mutex. Therefore we mustn't call register_netdevice() with pn->all_ppp_mutex already locked, or we'd deadlock in case register_netdevice() fails and calls .ndo_uninit(). Fortunately, we can unlock pn->all_ppp_mutex before calling register_netdevice(). This lock protects pn->units_idr, which isn't used in the device registration process. However, keeping pn->all_ppp_mutex locked during device registration did ensure that no device in transient state would be published in pn->units_idr. In practice, unlocking it before calling register_netdevice() doesn't change this property: ppp_unit_register() is called with 'ppp_mutex' locked and all searches done in pn->units_idr hold this lock too. Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Reported-and-tested-by: syzbot+367889b9c9e279219175@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15drm/i915: Fix deadlock in i830_disable_pipe()Ville Syrjälä
i830_disable_pipe() gets called from the power well code, and thus we're already holding the power domain mutex. That means we can't call plane->get_hw_state() as it will also try to grab the same mutex and will thus deadlock. Replace the assert_plane() calls (which calls ->get_hw_state()) with just raw register reads in i830_disable_pipe(). As a bonus we can now get a warning if plane C is enabled even though we don't even expose it as a drm plane. v2: Do a separate WARN_ON() for each plane (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: d87ce7640295 ("drm/i915: Add .get_hw_state() method for planes") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171129125411.29055-1-ville.syrjala@linux.intel.com (cherry picked from commit 5816d9cbc0a0fbf232fe297cefcb85361a3cde90) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-15drm/i915: Redo plane sanitation during readoutVille Syrjälä
Unify the plane disabling during state readout by pulling the code into a new helper intel_plane_disable_noatomic(). We'll also read out the state of all planes, so that we know which planes really need to be diabled. Additonally we change the plane<->pipe mapping sanitation to work by simply disabling the offending planes instead of entire pipes. And we do it before we otherwise sanitize the crtcs, which means we don't have to worry about misassigned planes during crtc sanitation anymore. v2: Reoder patches to not depend on enum old_plane_id v3: s/for_each_pipe/for_each_intel_crtc/ Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103223 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-3-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit b1e01595a66dc206a2c75401ec4c285740537f3f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-15drm/i915: Add .get_hw_state() method for planesVille Syrjälä
Add a .get_hw_state() method for planes, returning true or false depending on whether the plane is enabled. Use it to rewrite the plane enabled/disabled asserts in platform agnostic fashion. We do lose the pre-gen4 plane<->pipe mapping checks, but since we're supposed sanitize that anyway it doesn't really matter. v2: Reoder patches to not depend on enum old_plane_id Just call assert_plane_disabled() from assert_planes_disabled() v3: Deal with disabled power wells in .get_hw_state() v4: Rebase due skl primary plane code removal Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Tested-by: Thierry Reding <thierry.reding@gmail.com> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-2-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 51f5a096398433a881e845d3685a2c1dac756019) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-15mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clockBenoît Thébaudeau
Commit 5143c953a786 ("mmc: sdhci-esdhc-imx: Allow all supported prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode, thus bypassing the SD clock frequency prescaler, in order to be able to get higher SD clock frequencies in some contexts. However, that commit missed the fact that this value is illegal on the eSDHCv3 instance of the i.MX53. This seems to be the only exception on i.MX, this value being legal even for the eSDHCv2 instances of the i.MX53. Fix this issue by changing the minimum prescaler value if the i.MX53 eSDHCv3 is detected. According to the i.MX53 reference manual, if DLLCTRL[10] can be set, then the controller is eSDHCv3, else it is eSDHCv2. This commit fixes the following issue, which was preventing the i.MX53 Loco (IMX53QSB) board from booting Linux 4.15.0-rc5: [ 1.882668] mmcblk1: error -84 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc00 [ 2.002255] mmcblk1: error -84 transferring data, sector 2050, nr 6, cmd response 0x900, card status 0xc00 [ 12.645056] mmc1: Timeout waiting for hardware interrupt. [ 12.650473] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 12.656921] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001201 [ 12.663366] mmc1: sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000000 [ 12.669813] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 12.676258] mmc1: sdhci: Present: 0x01f8028f | Host ctl: 0x00000013 [ 12.682703] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000000 [ 12.689148] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000003f [ 12.695594] mmc1: sdhci: Timeout: 0x0000008e | Int stat: 0x00000000 [ 12.702039] mmc1: sdhci: Int enab: 0x107f004b | Sig enab: 0x107f004b [ 12.708485] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00001201 [ 12.714930] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x08100810 [ 12.721375] mmc1: sdhci: Cmd: 0x0000163a | Max curr: 0x00000000 [ 12.727821] mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x00000000 [ 12.734265] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 12.740709] mmc1: sdhci: Host ctl2: 0x00000000 [ 12.745157] mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xc8049200 [ 12.751601] mmc1: sdhci: ============================================ [ 12.758110] print_req_error: I/O error, dev mmcblk1, sector 2050 [ 12.764135] Buffer I/O error on dev mmcblk1p1, logical block 0, lost sync page write [ 12.775163] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null) [ 12.782746] VFS: Mounted root (ext4 filesystem) on device 179:9. [ 12.789151] mmcblk1: response CRC error sending SET_BLOCK_COUNT command, card status 0x900 Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reported-by: Wladimir J. van der Laan <laanwj@gmail.com> Tested-by: Wladimir J. van der Laan <laanwj@gmail.com> Fixes: 5143c953a786 ("mmc: sdhci-esdhc-imx: Allow all supported prescaler values") Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-15mac80211_hwsim: validate number of different channelsJohannes Berg
When creating a new radio on the fly, hwsim allows this to be done with an arbitrary number of channels, but cfg80211 only supports a limited number of simultaneous channels, leading to a warning. Fix this by validating the number - this requires moving the define for the maximum out to a visible header file. Reported-by: syzbot+8dd9051ff19940290931@syzkaller.appspotmail.com Fixes: b59ec8dd4394 ("mac80211_hwsim: fix number of channels in interface combinations") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-01-15mac80211_hwsim: add workqueue to wait for deferred radio deletion on mod unloadBenjamin Beichler
When closing multiple wmediumd instances with many radios and try to unload the mac80211_hwsim module, it may happen that the work items live longer than the module. To wait especially for this deletion work items, add a work queue, otherwise flush_scheduled_work would be necessary. Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-01-14Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull NVMe fix from Jens Axboe: "Just a single fix for nvme over fabrics that should go into 4.15" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-fabrics: initialize default host->id in nvmf_host_default()
2018-01-14Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...
2018-01-13Merge tag 'usb-4.15-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes and device ids for 4.15-rc8 Nothing major, small fixes for various devices, some resolutions for bugs found by fuzzers, and the usual handful of new device ids. All of these have been in linux-next with no reported issues" * tag 'usb-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Documentation: usb: fix typo in UVC gadgetfs config command usb: misc: usb3503: make sure reset is low for at least 100us uas: ignore UAS for Norelsys NS1068(X) chips USB: UDC core: fix double-free in usb_add_gadget_udc_release USB: fix usbmon BUG trigger usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer buffer usbip: remove kernel addresses from usb device and urb debug msgs usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input USB: serial: cp210x: add new device ID ELV ALC 8xxx USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
2018-01-13Merge tag 'staging-4.15-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single android ashmem bugfix that resolves a reported issue in that interface. It's been in linux-next this week with no reported issues" * tag 'staging-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl
2018-01-13Merge tag 'char-misc-4.15-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are two bugfixes for some driver bugs for 4.15-rc8 The first is a bluetooth security bug that has been ignored by the Bluetooth developers for months for no obvious reason at all, so I've taken it through my tree. The second is a simple double-free bug in the mux subsystem. Both have been in linux-next for a while with no reported issues" * tag 'char-misc-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mux: core: fix double get_device() Bluetooth: Prevent stack info leak from the EFS element.
2018-01-12Merge tag 'for-linus-4.15-rc8-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two build fixes for clang and two fixes for rather unlikely situations in the Xen gntdev driver" * tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: Fix partial gntdev_mmap() cleanup xen/gntdev: Fix off-by-one error when unmapping with holes x86: xen: remove the use of VLAIS x86/xen/time: fix section mismatch for xen_init_time_ops()
2018-01-12Merge branch 'nvme-4.15' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull a single NVMe fix from Christoph for 4.15.
2018-01-12Merge tag 'mmc-v4.15-rc2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - s3mci: mark debug_regs[] as static - renesas_sdhi: Add MODULE_LICENSE * tag 'mmc-v4.15-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: s3mci: mark debug_regs[] as static mmc: renesas_sdhi: Add MODULE_LICENSE
2018-01-12Merge tag 'drm-fixes-for-v4.15-rc8' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: - Nouveau: regression fix - Tegra: regression fix - vmwgfx: crasher + freed data leak - i915: KASAN use after free fix, whitelist register to avoid hang fix, GVT fixes - vc4: irq/pm fix * tag 'drm-fixes-for-v4.15-rc8' of git://people.freedesktop.org/~airlied/linux: drm/i915: Don't adjust priority on an already signaled fence drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake. drm/vmwgfx: Potential off by one in vmw_view_add() drm/tegra: sor: Fix hang on Tegra124 eDP drm/vmwgfx: Don't cache framebuffer maps drm/nouveau/disp/gf119: add missing drive vfunc ptr drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser drm/i915/gvt: Clear the shadow page table entry after post-sync drm/vc4: Move IRQ enable to PM path
2018-01-12Merge tag 'mlx5-fixes-2018-01-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-01-11 The following series includes fixes to mlx5 core and netdev driver. To highlight we have two critical fixes in this series: 1st patch from Eran to address a fix for Host2BMC Breakage. 2nd patch from Saeed to address the RDMA IRQ vector affinity settings query issue, the patch provides the correct mlx5_core implementation for RDMA to correctly query vector affinity. I sent this patch privately to Sagi a week a go, so he could to test it but I didn't hear from him. All other patches are trivial misc fixes. Please pull and let me know if there's any problem. for -stable v4.14-y and later: ("net/mlx5: Fix get vector affinity helper function") ("{net,ib}/mlx5: Don't disable local loopback multicast traffic when needed") Note: Merging this series with net-next will produce the following conflict: <<<<<<< HEAD u8 disable_local_lb[0x1]; u8 reserved_at_3e2[0x1]; u8 log_min_hairpin_wq_data_sz[0x5]; u8 reserved_at_3e8[0x3]; ======= u8 disable_local_lb_uc[0x1]; u8 disable_local_lb_mc[0x1]; u8 reserved_at_3e3[0x8]; >>>>>>> 359c96447ac2297fabe15ef30b60f3b4b71e7fd0 To resolve, use the following hunk: i.e: <<<<<< u8 disable_local_lb_uc[0x1]; u8 disable_local_lb_mc[0x1]; u8 log_min_hairpin_wq_data_sz[0x5]; u8 reserved_at_3e8[0x3]; >>>>>> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12Input: ALPS - fix multi-touch decoding on SS4 plus touchpadsNir Perry
The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry <nirperry@gmail.com> Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-12Merge tag 'drm-intel-fixes-2018-01-11-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Hopefully final drm/i915 fixes for v4.15: - Fix a KASAN reported use after free - Whitelist a register to avoid hangs - GVT fixes * tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Don't adjust priority on an already signaled fence drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake. drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser drm/i915/gvt: Clear the shadow page table entry after post-sync
2018-01-12Merge branch 'vmwgfx-fixes-4.15' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Two important fixes for vmwgfx. The off-by-one fix could cause a malicious user to potentially crash the kernel. The framebuffer map cache fix can under some circumstances enable a user to read from or write to freed pages. * 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Potential off by one in vmw_view_add() drm/vmwgfx: Don't cache framebuffer maps
2018-01-11Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for stable" * tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client: rbd: set max_segments to USHRT_MAX rbd: reacquire lock should update lock owner client id
2018-01-11Merge tag 'gpio-v4.15-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly" * tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
2018-01-12net/mlx5e: Remove timestamp set from netdevice open flowFeras Daoud
To avoid configuration override, timestamp set call will be moved from the netdevice open flow to the init flow. By this, a close-open procedure will not override the timestamp configuration. In addition, the change will rename mlx5e_timestamp_set function to be mlx5e_timestamp_init. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12net/mlx5: Update ptp_clock_event foreach PPS eventFeras Daoud
PPS event did not update ptp_clock_event fields, therefore, timestamp value was not updated correctly. This fix updates the event source and the timestamp value for each PPS event. Fixes: 7c39afb394c7 ("net/mlx5: PTP code migration to driver core section") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12net/mlx5e: Don't override netdev features field unless in error flowGal Pressman
Set features function sets dev->features in order to keep track of which features were successfully changed and which weren't (in case the user asks for more than one change in a single command). This breaks the logic in __netdev_update_features which assumes that dev->features is not changed on success and checks for diffs between features and dev->features (diffs that might not exist at this point because of the driver override). The solution is to keep track of successful/failed feature changes and assign them to dev->features in case of failure only. Fixes: 0e405443e803 ("net/mlx5e: Improve set features ndo resiliency") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12net/mlx5e: Check support before TC swap in ETS initTariq Toukan
Should not do the following swap between TCs 0 and 1 when max num of TCs is 1: tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1) Fixes: 08fb1dacdd76 ("net/mlx5e: Support DCBNL IEEE ETS") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12net/mlx5e: Add error print in ETS initTariq Toukan
ETS initialization might fail, add a print to indicate such failures. Fixes: 08fb1dacdd76 ("net/mlx5e: Support DCBNL IEEE ETS") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12net/mlx5e: Keep updating ethtool statistics when the interface is downGal Pressman
ethtool statistics should be updated even when the interface is down since it shows more than just netdev counters, which might change while the logical link is down. One useful use case, for example, is when running RoCE traffic over the interface (while the logical link is down, but physical link is up) and examining rx_prioX_bytes. Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12net/mlx5: Fix error handling in load oneMaor Gottlieb
We didn't store the result of mlx5_init_once, due to that mlx5_load_one returned success on error. Fix that. Fixes: 59211bd3b632 ("net/mlx5: Split the load/unload flow into hardware and software flows") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12net/mlx5: Fix mlx5_get_uars_page to return error codeEran Ben Elisha
Change mlx5_get_uars_page to return ERR_PTR in case of allocation failure. Change all callers accordingly to check the IS_ERR(ptr) instead of NULL. Fixes: 59211bd3b632 ("net/mlx5: Split the load/unload flow into hardware and software flows") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12net/mlx5: Fix memory leak in bad flow of mlx5_alloc_irq_vectorsAlaa Hleihel
Fix a memory leak where in case that pci_alloc_irq_vectors failed, priv->irq_info was not released. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12{net,ib}/mlx5: Don't disable local loopback multicast traffic when neededEran Ben Elisha
There are systems platform information management interfaces (such as HOST2BMC) for which we cannot disable local loopback multicast traffic. Separate disable_local_lb_mc and disable_local_lb_uc capability bits so driver will not disable multicast loopback traffic if not supported. (It is expected that Firmware will not set disable_local_lb_mc if HOST2BMC is running for example.) Function mlx5_nic_vport_update_local_lb will do best effort to disable/enable UC/MC loopback traffic and return success only in case it succeeded to changed all allowed by Firmware. Adapt mlx5_ib and mlx5e to support the new cap bits. Fixes: 2c43c5a036be ("net/mlx5e: Enable local loopback in loopback selftest") Fixes: c85023e153e3 ("IB/mlx5: Add raw ethernet local loopback support") Fixes: bded747bb432 ("net/mlx5: Add raw ethernet local loopback firmware command") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-11usb: misc: usb3503: make sure reset is low for at least 100usStefan Agner
When using a GPIO which is high by default, and initialize the driver in USB Hub mode, initialization fails with: [ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5) The reason seems to be that the chip is not properly reset. Probe does initialize reset low, however some lines later the code already set it back high, which is not long enouth. Make sure reset is asserted for at least 100us by inserting a delay after initializing the reset pin during probe. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-11Merge tag 'usb-serial-4.15-rc8' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.15-rc8 Here are a couple of new device ids for cp210x. Both have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org>
2018-01-11drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rateJonathan Liu
It was only checking the divider when determing the closest match if it could not match the requested rate exactly. For a projector connected to an Olimex A20-OLinuXino-LIME using HDMI with a native resolution of 1280x800 and pixel clock of 83.5 MHz, this resulted in 1280x800 mode not being available and the following in dmesg when the kernel is booted with drm.debug=0x3e: [drm:drm_mode_debug_printmodeline] Modeline 37:"1280x800" 60 83500 1280 1352 1480 1680 800 810 816 831 0x48 0x5 [drm:drm_mode_prune_invalid] Not using 1280x800 mode: NOCLOCK Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-4-net147@gmail.com
2018-01-11drm/sun4i: hdmi: Fix incorrect assignment in sun4i_tmds_determine_rateJonathan Liu
best_div is set to i which corresponds to rate halving when it should be set to j which corresponds to the divider. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-3-net147@gmail.com
2018-01-11drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rateJonathan Liu
It is possible that if there is no exact rate match and "rounded = clk_hw_round_rate(parent, ideal)" gives high enough values (e.g. if rounded is 2 * ideal) that the condition "abs(rate - rounded / i) < abs(rate - best_parent / best_div)" is never met and best_parent is never set. This results in req->rate and req->best_parent_rate being assigned 0. To avoid this, we set best_parent to the first calculated rate if it is unset. The sun4i_tmds_calc_divider function already has a similar check. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-2-net147@gmail.com
2018-01-11drm/i915: Don't adjust priority on an already signaled fenceChris Wilson
When we retire a signaled fence, we free the dependency tree. However, we skip clearing the list so that if we then try to adjust the priority of the signaled fence, we may walk the list of freed dependencies. [ 3083.156757] ================================================================== [ 3083.156806] BUG: KASAN: use-after-free in execlists_schedule+0x199/0x660 [i915] [ 3083.156810] Read of size 8 at addr ffff8806bf20f400 by task Xorg/831 [ 3083.156815] CPU: 0 PID: 831 Comm: Xorg Not tainted 4.15.0-rc6-no-psn+ #1 [ 3083.156817] Hardware name: Notebook N24_25BU/N24_25BU, BIOS 5.12 02/17/2017 [ 3083.156818] Call Trace: [ 3083.156823] dump_stack+0x5c/0x7a [ 3083.156827] print_address_description+0x6b/0x290 [ 3083.156830] kasan_report+0x28f/0x380 [ 3083.156872] ? execlists_schedule+0x199/0x660 [i915] [ 3083.156914] execlists_schedule+0x199/0x660 [i915] [ 3083.156956] ? intel_crtc_atomic_check+0x146/0x4e0 [i915] [ 3083.156997] ? execlists_submit_request+0xe0/0xe0 [i915] [ 3083.157038] ? i915_vma_misplaced.part.4+0x25/0xb0 [i915] [ 3083.157079] ? __i915_vma_do_pin+0x7c8/0xc80 [i915] [ 3083.157121] ? intel_atomic_state_alloc+0x44/0x60 [i915] [ 3083.157130] ? drm_atomic_helper_page_flip+0x3e/0xb0 [drm_kms_helper] [ 3083.157145] ? drm_mode_page_flip_ioctl+0x7d2/0x850 [drm] [ 3083.157159] ? drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157172] ? drm_ioctl+0x45b/0x560 [drm] [ 3083.157211] i915_gem_object_wait_priority+0x14c/0x2c0 [i915] [ 3083.157251] ? i915_gem_get_aperture_ioctl+0x150/0x150 [i915] [ 3083.157290] ? i915_vma_pin_fence+0x1d8/0x320 [i915] [ 3083.157331] ? intel_pin_and_fence_fb_obj+0x175/0x250 [i915] [ 3083.157372] ? intel_rotation_info_size+0x60/0x60 [i915] [ 3083.157413] ? intel_link_compute_m_n+0x80/0x80 [i915] [ 3083.157428] ? drm_dev_printk+0x1b0/0x1b0 [drm] [ 3083.157443] ? drm_dev_printk+0x1b0/0x1b0 [drm] [ 3083.157485] intel_prepare_plane_fb+0x2f8/0x5a0 [i915] [ 3083.157527] ? intel_crtc_get_vblank_counter+0x80/0x80 [i915] [ 3083.157536] drm_atomic_helper_prepare_planes+0xa0/0x1c0 [drm_kms_helper] [ 3083.157587] intel_atomic_commit+0x12e/0x4e0 [i915] [ 3083.157605] drm_atomic_helper_page_flip+0xa2/0xb0 [drm_kms_helper] [ 3083.157621] drm_mode_page_flip_ioctl+0x7d2/0x850 [drm] [ 3083.157638] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157652] ? drm_lease_owner+0x1a/0x30 [drm] [ 3083.157668] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157681] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157696] drm_ioctl+0x45b/0x560 [drm] [ 3083.157711] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157725] ? drm_getstats+0x20/0x20 [drm] [ 3083.157729] ? timerqueue_del+0x49/0x80 [ 3083.157732] ? __remove_hrtimer+0x62/0xb0 [ 3083.157735] ? hrtimer_try_to_cancel+0x173/0x210 [ 3083.157738] do_vfs_ioctl+0x13b/0x880 [ 3083.157741] ? ioctl_preallocate+0x140/0x140 [ 3083.157744] ? _raw_spin_unlock_irq+0xe/0x30 [ 3083.157746] ? do_setitimer+0x234/0x370 [ 3083.157750] ? SyS_setitimer+0x19e/0x1b0 [ 3083.157752] ? SyS_alarm+0x140/0x140 [ 3083.157755] ? __rcu_read_unlock+0x66/0x80 [ 3083.157757] ? __fget+0xc4/0x100 [ 3083.157760] SyS_ioctl+0x74/0x80 [ 3083.157763] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.157765] RIP: 0033:0x7f6135d0c6a7 [ 3083.157767] RSP: 002b:00007fff01451888 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 [ 3083.157769] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f6135d0c6a7 [ 3083.157771] RDX: 00007fff01451950 RSI: 00000000c01864b0 RDI: 000000000000000c [ 3083.157772] RBP: 00007f613076f600 R08: 0000000000000001 R09: 0000000000000000 [ 3083.157773] R10: 0000000000000060 R11: 0000000000003246 R12: 0000000000000000 [ 3083.157774] R13: 0000000000000060 R14: 000000000000001b R15: 0000000000000060 [ 3083.157779] Allocated by task 831: [ 3083.157783] kmem_cache_alloc+0xc0/0x200 [ 3083.157822] i915_gem_request_await_dma_fence+0x2c4/0x5d0 [i915] [ 3083.157861] i915_gem_request_await_object+0x321/0x370 [i915] [ 3083.157900] i915_gem_do_execbuffer+0x1165/0x19c0 [i915] [ 3083.157937] i915_gem_execbuffer2+0x1ad/0x550 [i915] [ 3083.157950] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157962] drm_ioctl+0x45b/0x560 [drm] [ 3083.157964] do_vfs_ioctl+0x13b/0x880 [ 3083.157966] SyS_ioctl+0x74/0x80 [ 3083.157968] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.157971] Freed by task 831: [ 3083.157973] kmem_cache_free+0x77/0x220 [ 3083.158012] i915_gem_request_retire+0x72c/0xa70 [i915] [ 3083.158051] i915_gem_request_alloc+0x1e9/0x8b0 [i915] [ 3083.158089] i915_gem_do_execbuffer+0xa96/0x19c0 [i915] [ 3083.158127] i915_gem_execbuffer2+0x1ad/0x550 [i915] [ 3083.158140] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.158153] drm_ioctl+0x45b/0x560 [drm] [ 3083.158155] do_vfs_ioctl+0x13b/0x880 [ 3083.158156] SyS_ioctl+0x74/0x80 [ 3083.158158] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.158162] The buggy address belongs to the object at ffff8806bf20f400 which belongs to the cache i915_dependency of size 64 [ 3083.158166] The buggy address is located 0 bytes inside of 64-byte region [ffff8806bf20f400, ffff8806bf20f440) [ 3083.158168] The buggy address belongs to the page: [ 3083.158171] page:00000000d43decc4 count:1 mapcount:0 mapping: (null) index:0x0 [ 3083.158174] flags: 0x17ffe0000000100(slab) [ 3083.158179] raw: 017ffe0000000100 0000000000000000 0000000000000000 0000000180200020 [ 3083.158182] raw: ffffea001afc16c0 0000000500000005 ffff880731b881c0 0000000000000000 [ 3083.158184] page dumped because: kasan: bad access detected [ 3083.158187] Memory state around the buggy address: [ 3083.158190] ffff8806bf20f300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158192] ffff8806bf20f380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158195] >ffff8806bf20f400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158196] ^ [ 3083.158199] ffff8806bf20f480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158201] ffff8806bf20f500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158203] ================================================================== Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reported-by: Mike Keehan <mike@keehan.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104436 Fixes: 1f181225f8ec ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180106105618.13532-1-chris@chris-wilson.co.uk (cherry picked from commit c218ee03b9315073ce43992792554dafa0626eb8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-11drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.Kenneth Graunke
Geminilake requires the 3D driver to select whether barriers are intended for compute shaders, or tessellation control shaders, by whacking a "Barrier Mode" bit in SLICE_COMMON_ECO_CHICKEN1 when switching pipelines. Failure to do this properly can result in GPU hangs. Unfortunately, this means it needs to switch mid-batch, so only userspace can properly set it. To facilitate this, the kernel needs to whitelist the register. The workarounds page currently tags this as applying to Broxton only, but that doesn't make sense. The documentation for the register it references says the bit userspace is supposed to toggle only exists on Geminilake. Empirically, the Mesa patch to toggle this bit appears to fix intermittent GPU hangs in tessellation control shader barrier tests on Geminilake; we haven't seen those hangs on Broxton. v2: Mention WA #0862 in the comment (it doesn't have a name). Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180105085905.9298-1-kenneth@whitecape.org (cherry picked from commit ab062639edb0412daf6de540725276b9a5d217f9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei Starovoitov. 2) Revert dev_get_random_name() changes as adjust the error code returns seen by userspace definitely breaks stuff. 3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel Grumbach. 4) From wrong AF family when requesting sock diag modules, from Andrii Vladyka. 5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang. 6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner. 7) Don't leak when removing VLAN ID 0, from Cong Wang. 8) Hey there's a potential leak in ipv6_make_skb() too, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: sr: fix TLVs not being copied using setsockopt ipv6: fix possible mem leaks in ipv6_make_skb() mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable mlxsw: pci: Wait after reset before accessing HW nfp: always unmask aux interrupts at init 8021q: fix a memory leak for VLAN 0 device of_mdio: avoid MDIO bus removal when a PHY is missing caif_usb: use strlcpy() instead of strncpy() doc: clarification about setting SO_ZEROCOPY net: gianfar_ptp: move set_fipers() to spinlock protecting area sctp: make use of pre-calculated len sctp: add a ceiling to optlen in some sockopts sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events bpf: introduce BPF_JIT_ALWAYS_ON config bpf: avoid false sharing of map refcount with max_entries ipv6: remove null_entry before adding default route SolutionEngine771x: add Ether TSU resource SolutionEngine771x: fix Ether platform data docs-rst: networking: wire up msg_zerocopy net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg() ...
2018-01-10Input: synaptics - Lenovo Thinkpad T460p devices should use RMI王振杰
The tpouchpad/trackpoint on Lenovo Thinkpad T460p work with smbus/RMI. Signed-off-by: Zhenjie Wang <zhenjie.wang@sjtu.edu.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-10Input: of_touchscreen - add MODULE_LICENSEArnd Bergmann
The lack of the MODULE_LICENSE tag can lead to a warning here: WARNING: modpost: missing MODULE_LICENSE() in drivers/input/touchscreen/of_touchscreen.o I'm adding a license and description tag, but no MODULE_AUTHOR() as this file is a collection of standalone helper functions that were all added by different developers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-10IB/hfi1: Prevent a NULL dereferenceDan Carpenter
In the original code, we set "fd->uctxt" to NULL and then dereference it which will cause an Oops. Fixes: f2a3bc00a03c ("IB/hfi1: Protect context array set/clear with spinlock") Cc: <stable@vger.kernel.org> # 4.14.x Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-10iser-target: Fix possible use-after-free in connection establishment errorSagi Grimberg
In case we fail to establish the connection we must drain our pre-posted login recieve work request before continuing safely with connection teardown. Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API") Cc: <stable@vger.kernel.org> # 4.7+ Reported-by: Amrani, Ram <Ram.Amrani@cavium.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 11:06:23 +0000