| Age | Commit message (Collapse) | Author |
|---|
|
git://git.infradead.org/nvme into block-6.9
Pull NVMe fixes from Keith.
* git://git.infradead.org/nvme:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
|
|
In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
|
|
GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
|
|
It seems driver missed the point of proper use of device property APIs.
Correct this by updating headers and calls respectively.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com
|
|
Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.
Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal
>0000000000000002: 0000 illegal
0000000000000004: 0000 illegal
0000000000000006: 0000 illegal
0000000000000008: 0000 illegal
000000000000000a: 0000 illegal
000000000000000c: 0000 illegal
000000000000000e: 0000 illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------
Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().
Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.
Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)
Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.
Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)
Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.
Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ensure the inner IP header is part of skb's linear data before reading
its ECN bits. Otherwise we might read garbage.
One symptom is the system erroneously logging errors like
"vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx".
Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see
commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()") for example). So let's reuse the same code structure for
consistency. Maybe we'll can add a common helper in the future.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"There's a few simple driver specific fixes here, plus some core
cleanups from Matti which fix issues found with client drivers due to
the API being confusing.
The two fixes for the stubs provide more constructive behaviour with
!REGULATOR configurations, issues were noticed with some hwmon drivers
which would otherwise have needed confusing bodges in the users.
The irq_helpers fix to duplicate the provided name for the interrupt
controller was found because a driver got this wrong and it's again a
case where the core is the sensible place to put the fix"
* tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: change devm_regulator_get_enable_optional() stub to return Ok
regulator: change stubbed devm_regulator_get_enable to return Ok
regulator: vqmmc-ipq4019: fix module autoloading
regulator: qcom-refgen: fix module autoloading
regulator: mt6360: De-capitalize devicetree regulator subnodes
regulator: irq_helpers: duplicate IRQ name
|
|
We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed. The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.
v2:
- Grabbing vm->lock in the preempt worker creates a deadlock, so
checking the closed state is tricky. Instead flush the worker when
the refcount reaches zero. It should be impossible to queue the
preempt worker without already holding vm ref.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423074721.119633-4-matthew.auld@intel.com
(cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Panel replay was enabled by default in commit 5950efe25ee0
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
TLS requires a strict pdu pacing via MSG_EOR to signal the end
of a record and subsequent encryption. If we do not set MSG_EOR
at the end of a sequence the record won't be closed, encryption
doesn't start, and we end up with a send stall as the message
will never be passed on to the TCP layer.
So do not check for the queue status when TLS is enabled but
rather make the MSG_MORE setting dependent on the current
request only.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.
This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.
Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <jirong.feng@easystack.cn>
Tested-by: Jirong Feng <jirong.feng@easystack.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When we teardown the controller, we wait for pending I/Os to complete
(sq->ref on all queues to drop to zero) and then we go over the commands,
and free their command buffers in case they are still fetching data from
the host (e.g. processing nvme writes) and have yet to take a reference
on the sq.
However, we may miss the case where commands have failed before executing
and are queued for sending a response, but will never occur because the
queue socket is already down. In this case we may miss deallocating command
buffers.
Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is
idempotent anyways.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While I/O is running, if the pci bus error occurs then
in-flight I/O can not complete. Worst, if at this time,
user (logically) hot-unplug the nvme disk then the
nvme_remove() code path can't forward progress until
in-flight I/O is cancelled. So these sequence of events
may potentially hang hot-unplug code path indefinitely.
This patch helps cancel the pending/in-flight I/O from the
nvme request timeout handler in case the nvme controller
is in the terminal (DEAD/DELETING/DELETING_NOIO) state and
that helps nvme_remove() code path forward progress and
finish successfully.
Link: https://lore.kernel.org/all/199be893-5dfa-41e5-b6f2-40ac90ebccc4@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In nvmet_auth_host_hash(), if a mismatch is detected in the hash length
the kernel should print an error.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the nvmet_auth_host_hash() function fails, the error code should
be returned to its callers.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
On system where native nvme multipath is configured and iopolicy
is set to numa but the nvme controller numa node id is undefined
or -1 (NUMA_NO_NODE) then avoid calculating node distance for
finding optimal io path. In such case we may access numa distance
table with invalid index and that may potentially refer to incorrect
memory. So this patch ensures that if the nvme controller numa node
id is -1 then instead of calculating node distance for finding optimal
io path, we set the numa node distance of such controller to default 10
(LOCAL_DISTANCE).
Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Use -EBUSY instead of -EAGAIN in zcrypt_ccamisc.c
in cases where the CCA card returns 8/2290 to indicate
a temporarily unavailability of this function.
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
An EP11 reply cprb contains a field ret_code which may
hold an error code different than the error code stored
in the payload of the cprb. As of now all the EP11 misc
functions do not evaluate this field but focus on the
error code in the payload.
Before checking the payload error, first the cprb error
field should be evaluated which is introduced with this
patch.
If the return code value 0x000c0003 is seen, this
indicates a busy situation which is reflected by
-EBUSY in the zcrpyt_ep11misc.c low level function.
A higher level caller should consider to retry after
waiting a dedicated duration (say 1 second).
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Fix wrong format string debug feature: %04x was used
to print out a 32 bit value. - changed to %08x.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
If spi_sync() is called with the non-empty queue and the same spi_message
is then reused, the complete callback for the message remains set while
the context is cleared, leading to a null pointer dereference when the
callback is invoked from spi_finalize_current_message().
With function inlining disabled, the call stack might look like this:
_raw_spin_lock_irqsave from complete_with_flags+0x18/0x58
complete_with_flags from spi_complete+0x8/0xc
spi_complete from spi_finalize_current_message+0xec/0x184
spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474
spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230
__spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4
__spi_transfer_message_noqueue from __spi_sync+0x204/0x248
__spi_sync from spi_sync+0x24/0x3c
spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd]
mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154
_regmap_raw_read from _regmap_bus_read+0x44/0x70
_regmap_bus_read from _regmap_read+0x60/0xd8
_regmap_read from regmap_read+0x3c/0x5c
regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd]
mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd]
mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x118/0x1f4
irq_thread from kthread+0xd8/0xf4
kthread from ret_from_fork+0x14/0x28
Fix this by also setting message->complete to NULL when the transfer is
complete.
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/r/20240430182705.13019-1-mans@mansr.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds a missed handling of PL domain doorbell while
handling VRAM faults.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults")
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a race condition when re-creating a kfd_process for a process.
This has been observed when a process under the debugger executes
exec(3). In this scenario:
- The process executes exec.
- This will eventually release the process's mm, which will cause the
kfd_process object associated with the process to be freed
(kfd_process_free_notifier decrements the reference count to the
kfd_process to 0). This causes kfd_process_ref_release to enqueue
kfd_process_wq_release to the kfd_process_wq.
- The debugger receives the PTRACE_EVENT_EXEC notification, and tries to
re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE).
- When handling this request, KFD tries to re-create a kfd_process.
This eventually calls kfd_create_process and kobject_init_and_add.
At this point the call to kobject_init_and_add can fail because the
old kfd_process.kobj has not been freed yet by kfd_process_wq_release.
This patch proposes to avoid this race by making sure to drain
kfd_process_wq before creating a new kfd_process object. This way, we
know that any cleanup task is done executing when we reach
kobject_init_and_add.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
preOS will not support display mode programming and link training
for UHBR rates.
[how]
If we detect a sink that's UHBR capable, disable seamless boot
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add VCO speed parameters in the bounding box array.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround
for sporadic MDI error on Meteor Lake systems"). The referenced commit
used usleep_range inside the PHY access routines, which are sometimes
called from an atomic context. This can lead to a kernel panic in some
scenarios, such as cable disconnection and reconnection on vPro systems.
Solve this by changing the usleep_range calls back to udelay.
Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems")
Cc: stable@vger.kernel.org
Reported-by: Jérôme Carretero <cJ@zougloub.eu>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740
Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/
Co-developed-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move
on same heap. The basic problem here is that after the move the old
location is simply not available any more.
Some fixes were suggested, but essentially we should call the move
notification before actually moving things because only this way we have
the correct order for DMA-buf and VM move notifications as well.
Also rework the statistic handling so that we don't update the eviction
counter before the move.
v2: add missing NULL check
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 94aeb4117343 ("drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3171
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
|
|
[Why]
During DP tunnel creation, CM preallocates BW and reduces
estimated BW of other DPIA. CM release preallocation only
when allocation is complete. Display mode validation logic
validates timings based on bw available per host router.
In multi display setup, this causes bw allocation failure
when allocation greater than estimated bw.
[How]
Do zero alloc to make the CM to release preallocation and
update estimated BW correctly for all DPIAs per host router.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] DSC debugfs, such as dp_dsc_clock_en_read,
use aconnector->dc_link to find pipe_ctx for display.
Displays connected to MST hub share the same dc_link.
DSC instance is from pipe_ctx. This causes incorrect
DSC instance for display connected to MST hub.
[How] Add aconnector->sink check to find pipe_ctx.
CC: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
New request from KMD/VBIOS in order to support new UMA carveout
model. This fixes a null dereference from accessing
Ctx->dc_bios->integrated_info while it was NULL.
DAL parses through the BIOS and extracts the necessary
integrated_info but was missing a case for the new BIOS
version 2.3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The Topaz family (88E6141 and 88E6341) only support 256 Forwarding
Information Tables.
Fixes: a75961d0ebfd ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341")
Fixes: 1558727a1c1b ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
[Why & How]
Currently DCN315 clk manager is missing code to enable/disable dtbclk.
Because of this, "optimized_required" flag is constantly set
and this prevents FreeSync from engaging for certain high bandwidth
display Modes which require DTBCLK.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The selftest for the driver sends a dummy packet and checks if the
packet will be received properly as it should be. The regular TX path
and the selftest can use the same network queue so locking is required
and was missing in the selftest path. This was addressed in the commit
cited below.
Unfortunately locking the TX queue requires BH to be disabled which is
not the case in selftest path which is invoked in process context.
Lockdep should be complaining about this.
Use __netif_tx_lock_bh() for TX queue locking.
Fixes: c650e04898072 ("cxgb4: Fix race between loopback and normal Tx path")
Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the DCN20 resource initialization, ensure that DMCUB support starts
configured as true.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Theoretically rare corner case where ceil(Y) results in rounding up to
an integer. If this happens, the 1 should be carried over to the X
value.
CC: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Subtract the VRAM pinned memory when checking for available memory
in amdgpu_amdkfd_reserve_mem_limit function since that memory is not
available for use.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ublk_drv currently creates block devices with the default max_segments
and max_segment_size limits of BLK_MAX_SEGMENTS (128) and
BLK_MAX_SEGMENT_SIZE (65536) respectively. These defaults can
artificially constrain the I/O size seen by the ublk server - for
example, suppose that the ublk server has configured itself to accept
I/Os up to 1M and the application is also issuing 1M sized I/Os. If the
I/O buffer used by the application is backed by 4K pages, the buffer
could consist of up to 1M / 4K = 256 physically discontiguous segments
(even if the buffer is virtually contiguous). As such, the I/O could
exceed the default max_segments limit and get split. This can cause
unnecessary performance issues if the ublk server is optimized to handle
1M I/Os. The block layer's segment count/size limits exist to model
hardware constraints which don't exist in ublk_drv's case, so just
remove those limits for the block devices created by ublk_drv.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Riley Thomasson <riley@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240430211623.2802036-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
device_get_match_data() function should not be used on the device other
than the one matched to the given driver, because it always returns the
match_data of the matched driver. In case of exynos-clkout driver, the
original code matches the OF IDs on the PARENT device, so replacing it
with of_device_get_match_data() broke the driver.
This has been already pointed once in commit 2bc5febd05ab ("clk: samsung:
Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"").
To avoid further confusion, add a comment about this special case, which
requires direct of_match_device() call to pass custom IDs array.
This partially reverts commit 409c39ec92a35e3708f5b5798c78eae78512cd71.
Cc: <stable@vger.kernel.org>
Fixes: 409c39ec92a3 ("clk: Use device_get_match_data()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20240425075628.838497-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240430184656.357805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: drivers/input/mouse/amimouse: section mismatch in reference: amimouse_driver+0x8 (section: .data) -> amimouse_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/2e3783106bf6bd9a7bdeb12b706378fb16316471.1711748999.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
typec_register_partner() does not guarantee partner registration
to always succeed. In the event of failure, port->partner is set
to the error value or NULL. Given that port->partner validity is
not checked, this results in the following crash:
Unable to handle kernel NULL pointer dereference at virtual address xx
pc : run_state_machine+0x1bc8/0x1c08
lr : run_state_machine+0x1b90/0x1c08
..
Call trace:
run_state_machine+0x1bc8/0x1c08
tcpm_state_machine_work+0x94/0xe4
kthread_worker_fn+0x118/0x328
kthread+0x1d0/0x23c
ret_from_fork+0x10/0x20
To prevent the crash, check for port->partner validity before
derefencing it in all the call sites.
Cc: stable@vger.kernel.org
Fixes: c97cd0b4b54e ("usb: typec: tcpm: set initial svdm version based on pd revision")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before sending Enter Mode for an Alt Mode, there is a gap between Discover
Modes and the Alt Mode driver queueing the Enter Mode VDM for the port
partner to send a message to the port.
If this message results in unregistering Alt Modes such as in a DR_SWAP,
then the following deadlock can occur with respect to the DisplayPort Alt
Mode driver:
1. The DR_SWAP state holds port->lock. Unregistering the Alt Mode driver
results in a cancel_work_sync() that waits for the current dp_altmode_work
to finish.
2. dp_altmode_work makes a call to tcpm_altmode_enter. The deadlock occurs
because tcpm_queue_vdm_unlock attempts to hold port->lock.
Before attempting to grab the lock, ensure that the port is in a state
vdm_run_state_machine can run in. Alt Mode unregistration will not occur
in these states.
Fixes: 03eafcfb60c0 ("usb: typec: tcpm: Add tcpm_queue_vdm_unlocked() helper")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202356.3372314-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check and unregister existing source caps in tcpm_register_source_caps
function before registering new ones. This change fixes following
warning when port partner resends source caps after negotiating PD contract
for the purpose of re-negotiation.
[ 343.135030][ T151] sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities'
[ 343.135071][ T151] Call trace:
[ 343.135076][ T151] dump_backtrace+0xe8/0x108
[ 343.135099][ T151] show_stack+0x18/0x24
[ 343.135106][ T151] dump_stack_lvl+0x50/0x6c
[ 343.135119][ T151] dump_stack+0x18/0x24
[ 343.135126][ T151] sysfs_create_dir_ns+0xe0/0x140
[ 343.135137][ T151] kobject_add_internal+0x228/0x424
[ 343.135146][ T151] kobject_add+0x94/0x10c
[ 343.135152][ T151] device_add+0x1b0/0x4c0
[ 343.135187][ T151] device_register+0x20/0x34
[ 343.135195][ T151] usb_power_delivery_register_capabilities+0x90/0x20c
[ 343.135209][ T151] tcpm_pd_rx_handler+0x9f0/0x15b8
[ 343.135216][ T151] kthread_worker_fn+0x11c/0x260
[ 343.135227][ T151] kthread+0x114/0x1bc
[ 343.135235][ T151] ret_from_fork+0x10/0x20
[ 343.135265][ T151] kobject: kobject_add_internal failed for source-capabilities with -EEXIST, don't try to register things with the same name in the same directory.
Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities")
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240424223227.1807844-1-amitsd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a Fast Role Swap control message attempt results in a transition
to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event.
If the event is queued but processed after the tcpm_reset_port() call
in the PORT_RESET state, then the following occurs:
1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and
sinking state
2. tcpm_pd_event_handler() turns VBUS on before the port is in the default
state.
3. The port resolves as a sink. In the SNK_DISCOVERY state,
tcpm_set_charge() cannot set vbus to charge.
Clear pd events within PORT_RESET to get rid of non-applicable events.
Fixes: b17dd57118fe ("staging: typec: tcpm: Improve role swap with non PD capable partners")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tcpm_queue_vdm_unlocked queues VDMs over SOP regardless of input
parameter tx_sop_type. Fix tcpm_queue_vdm() call.
Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202546.3374218-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correctly set the length of the drm_event to the size of the structure
that's actually used.
The length of the drm_event was set to the parent structure instead of
to the drm_vmw_event_fence which is supposed to be read. drm_read
uses the length parameter to copy the event to the user space thus
resuling in oob reads.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 8b7de6aa8468 ("vmwgfx: Rework fence event action")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23566
Cc: David Airlie <airlied@gmail.com>
CC: Daniel Vetter <daniel@ffwll.ch>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.4+
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425192748.1761522-1-zack.rusin@broadcom.com
|
|
Currently we allocate all 3 levels of radix3 page tables using
nvkm_gsp_mem_ctor(), which uses dma_alloc_coherent() for allocating all of
the relevant memory. This can end up failing in scenarios where the system
has very high memory fragmentation, and we can't find enough contiguous
memory to allocate level 2 of the page table.
Currently, this can result in runtime PM issues on systems where memory
fragmentation is high - as we'll fail to allocate the page table for our
suspend/resume buffer:
kworker/10:2: page allocation failure: order:7, mode:0xcc0(GFP_KERNEL),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 10 PID: 479809 Comm: kworker/10:2 Not tainted
6.8.6-201.ChopperV6.fc39.x86_64 #1
Hardware name: SLIMBOOK Executive/Executive, BIOS N.1.10GRU06 02/02/2024
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x64/0x80
warn_alloc+0x165/0x1e0
? __alloc_pages_direct_compact+0xb3/0x2b0
__alloc_pages_slowpath.constprop.0+0xd7d/0xde0
__alloc_pages+0x32d/0x350
__dma_direct_alloc_pages.isra.0+0x16a/0x2b0
dma_direct_alloc+0x70/0x270
nvkm_gsp_radix3_sg+0x5e/0x130 [nouveau]
r535_gsp_fini+0x1d4/0x350 [nouveau]
nvkm_subdev_fini+0x67/0x150 [nouveau]
nvkm_device_fini+0x95/0x1e0 [nouveau]
nvkm_udevice_fini+0x53/0x70 [nouveau]
nvkm_object_fini+0xb9/0x240 [nouveau]
nvkm_object_fini+0x75/0x240 [nouveau]
nouveau_do_suspend+0xf5/0x280 [nouveau]
nouveau_pmops_runtime_suspend+0x3e/0xb0 [nouveau]
pci_pm_runtime_suspend+0x67/0x1e0
? __pfx_pci_pm_runtime_suspend+0x10/0x10
__rpm_callback+0x41/0x170
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_callback+0x5d/0x70
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_suspend+0x120/0x6a0
pm_runtime_work+0x98/0xb0
process_one_work+0x171/0x340
worker_thread+0x27b/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
Luckily, we don't actually need to allocate coherent memory for the page
table thanks to being able to pass the GPU a radix3 page table for
suspend/resume data. So, let's rewrite nvkm_gsp_radix3_sg() to use the sg
allocator for level 2. We continue using coherent allocations for lvl0 and
1, since they only take a single page.
V2:
* Don't forget to actually jump to the next scatterlist when we reach the
end of the scatterlist we're currently on when writing out the page table
for level 2
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-2-lyude@redhat.com
|
|
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a
BUG() on startup:
kernel BUG at include/linux/scatterlist.h:187!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30
Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019
RIP: 0010:sg_init_one+0x85/0xa0
Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54
24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b
0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00
RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000
RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508
R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018
FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0
Call Trace:
<TASK>
? die+0x36/0x90
? do_trap+0xdd/0x100
? sg_init_one+0x85/0xa0
? do_error_trap+0x65/0x80
? sg_init_one+0x85/0xa0
? exc_invalid_op+0x50/0x70
? sg_init_one+0x85/0xa0
? asm_exc_invalid_op+0x1a/0x20
? sg_init_one+0x85/0xa0
nvkm_firmware_ctor+0x14a/0x250 [nouveau]
nvkm_falcon_fw_ctor+0x42/0x70 [nouveau]
ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau]
r535_gsp_oneinit+0xb3/0x15f0 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? nvkm_udevice_new+0x95/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? ktime_get+0x47/0xb0
? srso_return_thunk+0x5/0x5f
nvkm_subdev_oneinit_+0x4f/0x120 [nouveau]
nvkm_subdev_init_+0x39/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
nvkm_subdev_init+0x44/0x90 [nouveau]
nvkm_device_init+0x166/0x2e0 [nouveau]
nvkm_udevice_init+0x47/0x70 [nouveau]
nvkm_object_init+0x41/0x1c0 [nouveau]
nvkm_ioctl_new+0x16a/0x290 [nouveau]
? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau]
? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau]
nvkm_ioctl+0x126/0x290 [nouveau]
nvif_object_ctor+0x112/0x190 [nouveau]
nvif_device_ctor+0x23/0x60 [nouveau]
nouveau_cli_init+0x164/0x640 [nouveau]
nouveau_drm_device_init+0x97/0x9e0 [nouveau]
? srso_return_thunk+0x5/0x5f
? pci_update_current_state+0x72/0xb0
? srso_return_thunk+0x5/0x5f
nouveau_drm_probe+0x12c/0x280 [nouveau]
? srso_return_thunk+0x5/0x5f
local_pci_probe+0x45/0xa0
pci_device_probe+0xc7/0x270
really_probe+0xe6/0x3a0
__driver_probe_device+0x87/0x160
driver_probe_device+0x1f/0xc0
__driver_attach+0xec/0x1f0
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x88/0xd0
bus_add_driver+0x116/0x220
driver_register+0x59/0x100
? __pfx_nouveau_drm_init+0x10/0x10 [nouveau]
do_one_initcall+0x5b/0x320
do_init_module+0x60/0x250
init_module_from_file+0x86/0xc0
idempotent_init_module+0x120/0x2b0
__x64_sys_finit_module+0x5e/0xb0
do_syscall_64+0x83/0x160
? srso_return_thunk+0x5/0x5f
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7feeb5cc20cd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0
ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd
RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035
RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310
R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0
R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80
</TASK>
We hit this when trying to initialize firmware of type
NVKM_FIRMWARE_IMG_DMA because we allocate our memory with
dma_alloc_coherent, and DMA allocations can't be turned back into memory
pages - which a scatterlist needs in order to map them.
So, fix this by allocating the memory with vmalloc instead().
V2:
* Fixup explanation as the prior one was bogus
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-1-lyude@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- mt6360_charger: Fix of_match for usb-otg-vbus regulator
- rt9455: Fix unused-const-variable for !CONFIG_USB_PHY
* tag 'for-v6.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator
power: rt9455: hide unused rt9455_boost_voltage_values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
- Add Grand Ridge to HPM CPU list
* tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Add Grand Ridge to HPM CPU list
|
|
A virtual SuperSpeed device in the FreeBSD BVCP package
(https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256.
It stopped working with Linux following a recent commit because now we
check these sizes more carefully than before.
Fix this regression by using the bMaxpacketSize0 value in the device
descriptor for SuperSpeed or faster devices, even if it is invalid. This
is a very simple-minded change; we might want to check more carefully for
values that actually make some sense (for instance, no smaller than 64).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Roger Whittaker <roger.whittaker@suse.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569
Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/
Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
