summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-03-06scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilitiesChandrakanth Patil
In kdump kernel mode, the driver works in reduced functionality mode with some features disabled such as reduced MSI-X count and RDPQ disabled, etc. However, the firmware is not aware of this mode in some cases, which results in undefined behavior. To address this, the driver informs the firmware about the kdump mode through MPI capabilities bit during driver initialization. This allows firmware to adjust its behavior accordingly. Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-3-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: megaraid_sas: Update max supported LD IDs to 240Chandrakanth Patil
The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF) is reserved for deleted LDs. However, in some cases, firmware was assigning LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the wrong disk as deleted. This in turn caused the wrong disk device to be taken offline by the SCSI midlayer. To address this issue, limit the LD ID range from 255 to 240. This ensures the deleted LD ID is properly identified and removed by the driver without accidently deleting any valid LDs. Fixes: ae6874ba4b43 ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update") Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Bad drive in topology results kernel crashRanjan Kumar
When the SAS Transport Layer support is enabled and a device exposed to the OS by the driver fails INQUIRY commands, the driver frees up the memory allocated for an internal HBA port data structure. However, in some places, the reference to the freed memory is not cleared. When the firmware sends the Device Info change event for the same device again, the freed memory is accessed and that leads to memory corruption and OS crash. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-7-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: NVMe command size greater than 8K failsRanjan Kumar
A wrong variable is checked while populating PRP entries in the PRP page and this results in failure. No PRP entries in the PRP page were successfully created and any NVMe Encapsulated commands with PRP of size greater than 8K failed. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-6-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Return proper values for failures in firmware init pathRanjan Kumar
Return proper non-zero return values for all the cases when the controller initialization and re-initialization fails. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-5-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Wait for diagnostic save during controller initRanjan Kumar
If a controller reset operation is triggered to recover the controller from a fault state, then wait for the snapdump to be saved in the firmware region before proceeding to reset the controller. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabledRanjan Kumar
Prevent driver from trying to dereference a NULL pointer in a debug print while removing a device during driver unload. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: ioctl timeout when disabling/enabling interruptRanjan Kumar
As part of Task Management handling, the driver will disable and enable the MSIx index zero which belongs to the Admin reply queue. During this transition the driver loses some interrupts and this leads to Admin request and ioctl timeouts. After enabling the interrupts, poll the Admin reply queue to avoid timeouts. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: lpfc: Avoid usage of list iterator variable after loopJakob Koschel
If the &epd_pool->list is empty when executing lpfc_get_io_buf_from_expedite_pool() the function would return an invalid pointer. Even in the case if the list is guaranteed to be populated, the iterator variable should not be used after the loop to be more robust for future changes. Linus proposed to avoid any use of the list iterator variable after the loop, in the attempt to move the list iterator variable declaration into the macro to avoid any potential misuse after the loop [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jkl820.git@gmail.com> Link: https://lore.kernel.org/r/20230301-scsi-lpfc-avoid-list-iterator-after-loop-v1-1-325578ae7561@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()Justin Tee
If kzalloc() fails in lpfc_sli4_cgn_params_read(), then we rely on lpfc_read_object()'s routine to NULL check pdata. Currently, an early return error is thrown from lpfc_read_object() to protect us from NULL ptr dereference, but the errno code is -ENODEV. Change the errno code to a more appropriate -ENOMEM. Reported-by: Kang Chen <void0red@gmail.com> Link: https://lore.kernel.org/all/20230226102338.3362585-1-void0red@gmail.com Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230228044336.5195-1-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()Asutosh Das
Smatch static checker reported: drivers/ufs/host/ufs-qcom.c:1469 ufs_qcom_mcq_config_resource() info: returning a literal zero is cleaner Fix the above warning by returning in place instead of a jump to a label. Also remove the usage of devm_kfree() as it's unnecessary in this function. Fixes: c263b4ef737e ("scsi: ufs: core: mcq: Configure resource regions") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com> Link: https://lore.kernel.org/r/3ebd2582af74b81ef7b57149f57c6a3bf0963953.1677721229.git.quic_asutoshd@quicinc.com Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERRAsutosh Das
Fix an error case in ufs_qcom_mcq_config_resource(), where the return value is set to 0 before passing it to PTR_ERR. This led to Smatch warning: drivers/ufs/host/ufs-qcom.c:1455 ufs_qcom_mcq_config_resource() warn: passing zero to 'PTR_ERR' Fixes: c263b4ef737e ("scsi: ufs: core: mcq: Configure resource regions") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com> Link: https://lore.kernel.org/r/94ca99b327af634799ce5f25d0112c28cd00970d.1677721072.git.quic_asutoshd@quicinc.com Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: ufs: ufs-qcom: Remove impossible checkDan Carpenter
The "dev_req_params" pointer points to inside the middle of a struct so it can't be NULL. Removing this impossible condition is nice because now we don't need to consider the correct error code for that situation. Link: https://lore.kernel.org/r/Y/yA3niWUcGYgBU8@kili Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: ufs: core: Add soft dependency on governor_simpleondemandAdrien Thierry
The ufshcd driver uses simpleondemand governor for devfreq. Add it to the list of ufshcd softdeps to allow userspace initramfs tools like dracut to automatically pull the governor module into the initramfs together with UFS drivers. Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.com Signed-off-by: Adrien Thierry <athierry@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: hisi_sas: Check devm_add_action() return valueKang Chen
In case devm_add_action() fails, check it in the caller of interrupt_preinit_v3_hw(). Link: https://lore.kernel.org/r/20230227031030.893324-1-void0red@gmail.com Signed-off-by: Kang Chen <void0red@gmail.com> Acked-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06clk: k210: remove an implicit 64-bit divisionConor Dooley
The K210 clock driver depends on SOC_CANAAN, which is only selectable when !MMU on RISC-V. !MMU is not possible on 32-bit yet, but patches have been sent for its enabling. The kernel test robot reported this implicit 64-bit division there. Replace the implicit division with an explicit one. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-riscv/202301201538.zNlqgE4L-lkp@intel.com/ Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Link: https://lore.kernel.org/r/20230301002657.352637-2-Mr.Bossman075@gmail.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-06scsi: qla2xxx: Add option to disable FC2 Target supportDaniel Wagner
Commit 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") added support for FC2 Targets. Unfortunately, there are older setups which break with this new feature enabled. Allow to disable it via module option. Link: https://lore.kernel.org/r/20230208152014.109214-1-dwagner@suse.de Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: target: iscsi: Fix an error message in iscsi_check_key()Maurizio Lombardi
The first half of the error message is printed by pr_err(), the second half is printed by pr_debug(). The user will therefore see only the first part of the message and will miss some useful information. Link: https://lore.kernel.org/r/20230214141556.762047-1-mlombard@redhat.com Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06net: ethernet: mtk_eth_soc: fix RX data corruption issueDaniel Golle
Fix data corruption issue with SerDes connected PHYs operating at 1.25 Gbps speed where we could previously observe about 30% packet loss while the bad packet counter was increasing. As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531 switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using rate-adaptation to 2500Base-X mode, this issue only got exposed now when we started trying to use SFP modules operating with 1.25 Gbps with the BananaPi R3 board. The fix is to set bit 12 which disables the RX FIFO clear function when setting up MAC MCR, MediaTek SDK did the same change stating: "If without this patch, kernel might receive invalid packets that are corrupted by GMAC."[1] [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63 Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC") Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06net: phy: smsc: fix link up detection in forced irq modeHeiner Kallweit
Currently link up can't be detected in forced mode if polling isn't used. Only link up interrupt source we have is aneg complete which isn't applicable in forced mode. Therefore we have to use energy-on as link up indicator. Fixes: 7365494550f6 ("net: phy: smsc: skip ENERGYON interrupt if disabled") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06cpumask: fix incorrect cpumask scanning result checksLinus Torvalds
It turns out that commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations") exposed a number of cases of drivers not checking the result of "cpumask_next()" and friends correctly. The documented correct check for "no more cpus in the cpumask" is to check for the result being equal or larger than the number of possible CPU ids, exactly _because_ we've always done those constant-sized cpumask scans using a widened type before. So the return value of a cpumask scan should be checked with if (cpu >= nr_cpu_ids) ... because the cpumask scan did not necessarily stop exactly *at* that maximum CPU id. But a few cases ended up instead using checks like if (cpu == nr_cpumask_bits) ... which used that internal "widened" number of bits. And that used to work pretty much by accident (ok, in this case "by accident" is simply because it matched the historical internal implementation of the cpumask scanning, so it was more of a "intentionally using implementation details rather than an accident"). But the extended constant-sized optimizations then did that internal implementation differently, and now that code that did things wrong but matched the old implementation no longer worked at all. Which then causes subsequent odd problems due to using what ends up being an invalid CPU ID. Most of these cases require either unusual hardware or special uses to hit, but the random.c one triggers quite easily. All you really need is to have a sufficiently small CONFIG_NR_CPUS value for the bit scanning optimization to be triggered, but not enough CPUs to then actually fill that widened cpumask. At that point, the cpumask scanning will return the NR_CPUS constant, which is _not_ the same as nr_cpumask_bits. This just does the mindless fix with sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/' to fix the incorrect uses. The ones in the SCSI lpfc driver in particular could probably be fixed more cleanly by just removing that repeated pattern entirely, but I am not emptionally invested enough in that driver to care. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/ Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/ Reported-by: Vernon Yang <vernon2gm@gmail.com> Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/ Cc: Yury Norov <yury.norov@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-07Merge tag 'drm-misc-fixes-2023-02-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A fix for nouveau preventing the system shutdown and one for a build warning, and NULL pointer dereference fix for cirrus. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230223083839.5gtmu6i42bnj7pfh@houat
2023-03-06clk: HI655X: select REGMAP instead of depending on itRandy Dunlap
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 3a49afb84ca0 ("clk: enable hi655x common clk automatically") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Riku Voipio <riku.voipio@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-3-rdunlap@infradead.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-06kbuild, clk: remove MODULE_LICENSE in non-modulesNick Alcock
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230222121453.91915-13-nick.alcock@oracle.com Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-06kbuild, clk: bcm2835: remove MODULE_LICENSE in non-modulesNick Alcock
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: linux-clk@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230222121453.91915-12-nick.alcock@oracle.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-06bnxt_en: Fix the double free during device removalSelvin Xavier
Following warning reported by KASAN during driver unload ================================================================== BUG: KASAN: double-free in bnxt_remove_one+0x103/0x200 [bnxt_en] Free of addr ffff88814e8dd4c0 by task rmmod/17469 CPU: 47 PID: 17469 Comm: rmmod Kdump: loaded Tainted: G S 6.2.0-rc7+ #2 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.3.10 08/15/2019 Call Trace: <TASK> dump_stack_lvl+0x33/0x46 print_report+0x17b/0x4b3 ? __call_rcu_common.constprop.79+0x27e/0x8c0 ? __pfx_free_object_rcu+0x10/0x10 ? __virt_addr_valid+0xe3/0x160 ? bnxt_remove_one+0x103/0x200 [bnxt_en] kasan_report_invalid_free+0x64/0xd0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kasan_slab_free+0x179/0x1c0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kmem_cache_free+0x194/0x350 bnxt_remove_one+0x103/0x200 [bnxt_en] pci_device_remove+0x62/0x110 device_release_driver_internal+0xf6/0x1c0 driver_detach+0x76/0xe0 bus_remove_driver+0x89/0x160 pci_unregister_driver+0x26/0x110 ? strncpy_from_user+0x188/0x1c0 bnxt_exit+0xc/0x24 [bnxt_en] __x64_sys_delete_module+0x21f/0x390 ? __pfx___x64_sys_delete_module+0x10/0x10 ? __pfx_mem_cgroup_handle_over_high+0x10/0x10 ? _raw_spin_lock+0x87/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? __audit_syscall_entry+0x185/0x210 ? ktime_get_coarse_real_ts64+0x51/0x80 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7effcb6fd71b Code: 73 01 c3 48 8b 0d 6d 17 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 17 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffeada270b8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005623660e0750 RCX: 00007effcb6fd71b RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005623660e07b8 RBP: 0000000000000000 R08: 00007ffeada26031 R09: 0000000000000000 R10: 00007effcb771280 R11: 0000000000000206 R12: 00007ffeada272e0 R13: 00007ffeada28bc4 R14: 00005623660e02a0 R15: 00005623660e0750 </TASK> Auxiliary device structures are freed in bnxt_aux_dev_release. So avoid calling kfree from bnxt_remove_one. Also, set bp->edev to NULL before freeing the auxilary private structure. Fixes: d80d88b0dfff ("bnxt_en: Add auxiliary driver support") Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06bnxt_en: Avoid order-5 memory allocation for TPA dataMichael Chan
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO) completions on the aggregation ring. On P5 chips, the maximum number of concurrent TPA is 256 and the amount of memory we allocate is order-5 on systems using 4K pages. Memory allocation failure has been reported: NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1 Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022 Call Trace: dump_stack+0x57/0x6e warn_alloc.cold.120+0x7b/0xdd ? _cond_resched+0x15/0x30 ? __alloc_pages_direct_compact+0x15f/0x170 __alloc_pages_slowpath.constprop.108+0xc58/0xc70 __alloc_pages_nodemask+0x2d0/0x300 kmalloc_order+0x24/0xe0 kmalloc_order_trace+0x19/0x80 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en] ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en] __bnxt_open_nic+0x12e/0x780 [bnxt_en] bnxt_open+0x10b/0x240 [bnxt_en] __dev_open+0xe9/0x180 __dev_change_flags+0x1af/0x220 dev_change_flags+0x21/0x60 do_setlink+0x35c/0x1100 Instead of allocating this big chunk of memory and dividing it up for the concurrent TPA instances, allocate each small chunk separately for each TPA instance. This will reduce it to order-0 allocations. Fixes: 79632e9ba386 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06net: phylib: get rid of unnecessary lockingRussell King (Oracle)
The locking in phy_probe() and phy_remove() does very little to prevent any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA warnings. Remove it. ====================================================== WARNING: possible circular locking dependency detected 6.2.0-dirty #1108 Tainted: G W E ------------------------------------------------------ ip/415 is trying to acquire lock: ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy] but task is already holding lock: ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 rtnl_lock+0x24/0x30 sfp_bus_add_upstream+0x34/0x150 phy_sfp_probe+0x4c/0x94 [libphy] mv3310_probe+0x148/0x184 [marvell10g] phy_probe+0x8c/0x200 [libphy] call_driver_probe+0xbc/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __device_attach_driver+0xc4/0x160 bus_for_each_drv+0x80/0xe0 __device_attach+0xb0/0x1f0 device_initial_probe+0x1c/0x2c bus_probe_device+0xa4/0xb0 device_add+0x360/0x53c phy_device_register+0x60/0xa4 [libphy] fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio] fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio] of_mdiobus_register+0x140/0x340 [of_mdio] orion_mdio_probe+0x298/0x3c0 [mvmdio] platform_probe+0x70/0xe0 call_driver_probe+0x34/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0x104/0x210 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x3c bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __platform_driver_register+0x30/0x3c xt_compat_calc_jump+0x28/0xa4 [x_tables] do_one_initcall+0x50/0x1b0 do_init_module+0x50/0x1fc load_module+0x684/0x744 __do_sys_finit_module+0xc4/0x140 __arm64_sys_finit_module+0x28/0x34 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 -> #0 (&dev->lock){+.+.}-{3:3}: check_prev_add+0xb4/0xc80 validate_chain+0x414/0x47c __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 phy_attach_direct+0x17c/0x3a0 [libphy] phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink] phylink_fwnode_phy_connect+0x48/0x60 [phylink] mvpp2_open+0xec/0x2e0 [mvpp2] __dev_open+0x104/0x214 __dev_change_flags+0x1d4/0x254 dev_change_flags+0x2c/0x7c do_setlink+0x254/0xa50 __rtnl_newlink+0x430/0x514 rtnl_newlink+0x58/0x8c rtnetlink_rcv_msg+0x17c/0x560 netlink_rcv_skb+0x64/0x150 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x1d4/0x2b4 netlink_sendmsg+0x1a4/0x400 ____sys_sendmsg+0x228/0x290 ___sys_sendmsg+0x88/0xec __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&dev->lock); lock(rtnl_mutex); lock(&dev->lock); *** DEADLOCK *** Fixes: 298e54fa810e ("net: phy: add core phylib sfp support") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06drm/meson: fix 1px pink line on GXM when scaling video overlayChristian Hewitt
Playing media with a resolution smaller than the crtc size requires the video overlay to be scaled for output and GXM boards display a 1px pink line on the bottom of the scaled overlay. Comparing with the downstream vendor driver revealed VPP_DUMMY_DATA not being set [0]. Setting VPP_DUMMY_DATA prevents the 1px pink line from being seen. [0] https://github.com/endlessm/linux-s905x/blob/master/drivers/amlogic/amports/video.c#L7869 Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230303123312.155164-1-christianshewitt@gmail.com
2023-03-06net: stmmac: add to set device wake up flag when stmmac init phyRongguang Wei
When MAC is not support PMT, driver will check PHY's WoL capability and set device wakeup capability in stmmac_init_phy(). We can enable the WoL through ethtool, the driver would enable the device wake up flag. Now the device_may_wakeup() return true. But if there is a way which enable the PHY's WoL capability derectly, like in BIOS. The driver would not know the enable thing and would not set the device wake up flag. The phy_suspend may failed like this: [ 32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16 [ 32.409065] PM: Device stmmac-1:00 failed to suspend: error -16 [ 32.409067] PM: Some devices failed to suspend, or early wake event detected Add to set the device wakeup enable flag according to the get_wol function result in PHY can fix the error in this scene. v2: add a Fixes tag. Fixes: 1d8e5b0f3f2c ("net: stmmac: Support WOL with phy") Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-05hwmon: (adt7475) Fix masking of hysteresis registersTony O'Brien
The wrong bits are masked in the hysteresis register; indices 0 and 2 should zero bits [7:4] and preserve bits [3:0], and index 1 should zero bits [3:0] and preserve bits [7:4]. Fixes: 1c301fc5394f ("hwmon: Add a driver for the ADT7475 hardware monitoring chip") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-3-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-05hwmon: (adt7475) Display smoothing attributes in correct orderTony O'Brien
Throughout the ADT7475 driver, attributes relating to the temperature sensors are displayed in the order Remote 1, Local, Remote 2. Make temp_st_show() conform to this expectation so that values set by temp_st_store() can be displayed using the correct attribute. Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-2-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-05Merge tag 'v6.3-p2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
2023-03-05Merge tag 'x86-urgent-2023-03-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 updates from Thomas Gleixner: "A small set of updates for x86: - Return -EIO instead of success when the certificate buffer for SEV guests is not large enough - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on return to userspace for performance reasons, but the leaves user space vulnerable to cross-thread attacks which STIBP prevents. Update the documentation accordingly" * tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Return -EIO if certificate buffer is not large enough Documentation/hw-vuln: Document the interaction between IBRS and STIBP x86/speculation: Allow enabling STIBP with legacy IBRS
2023-03-05Merge tag 'irq-urgent-2023-03-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "A set of updates for the interrupt susbsystem: - Prevent possible NULL pointer derefences in irq_data_get_affinity_mask() and irq_domain_create_hierarchy() - Take the per device MSI lock before invoking code which relies on it being hold - Make sure that MSI descriptors are unreferenced before freeing them. This was overlooked when the platform MSI code was converted to use core infrastructure and results in a fals positive warning - Remove dead code in the MSI subsystem - Clarify the documentation for pci_msix_free_irq() - More kobj_type constification" * tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced genirq/msi: Drop dead domain name assignment irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy() genirq/irqdesc: Make kobj_type structures constant PCI/MSI: Clarify usage of pci_msix_free_irq() genirq/msi: Take the per-device MSI lock before validating the control structure genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
2023-03-04Merge tag 'i2c-for-6.3-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Some improvements/fixes for the newly added GXP driver and a Kconfig dependency fix" * tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gxp: fix an error code in probe i2c: gxp: return proper error on address NACK i2c: gxp: remove "empty" switch statement i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
2023-03-03Merge tag 'for-v6.3-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull more power supply updates from Sebastian Reichel: - Fix DT binding for Richtek RT9467 - Fix a NULL pointer check in the power-supply core - Document meaning of absent "present" property * tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: dt-bindings: power: supply: Revise Richtek RT9467 compatible name ABI: testing: sysfs-class-power: Document absence of "present" property power: supply: fix null pointer check order in __power_supply_register
2023-03-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "Updates that missed the first pull, mostly because of needing more soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an enclosure services (ses) update (mostly bug fixes) and other minor bug fixes and changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: zfcp: Trace when request remove fails after qdio send fails scsi: zfcp: Change the type of all fsf request id fields and variables to u64 scsi: zfcp: Make the type for accessing request hashtable buckets size_t scsi: ufs: core: Simplify ufshcd_execute_start_stop() scsi: ufs: core: Rely on the block layer for setting RQF_PM scsi: core: Extend struct scsi_exec_args scsi: lpfc: Fix double word in comments scsi: core: Remove the /proc/scsi/${proc_name} directory earlier scsi: core: Fix a source code comment scsi: cxgbi: Remove unneeded version.h include scsi: qedi: Remove unneeded version.h include scsi: mpi3mr: Remove unneeded version.h include scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization scsi: mpi3mr: Use number of bits to manage bitmap sizes scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() scsi: mpi3mr: Fix an issue found by KASAN scsi: mpi3mr: Replace 1-element array with flex-array scsi: ipr: Work around fortify-string warning scsi: ipr: Make ipr_probe_ioa_part2() return void ...
2023-03-03i2c: gxp: fix an error code in probeDan Carpenter
This is passing IS_ERR() instead of PTR_ERR() so instead of an error code it prints and returns the number 1. Fixes: 4a55ed6f89f5 ("i2c: Add GXP SoC I2C Controller") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Nick Hawkins <nick.hawkins@hpe.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-03i2c: gxp: return proper error on address NACKWolfram Sang
According to Documentation/i2c/fault-codes.rst, NACK after sending an address should be -ENXIO. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-03i2c: gxp: remove "empty" switch statementWolfram Sang
There used to be error messages which had to go. Now, it only consists of 'break's, so it can go. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-03i2c: Disable I2C_APPLE when I2C_PASEMI is a builtinBenjamin Gray
The ppc64le_allmodconfig sets I2C_PASEMI=y and leaves COMPILE_TEST to default to y and I2C_APPLE to default to m, running into a known incompatible configuration that breaks the build [1]. Specifically, a common dependency (i2c-pasemi-core.o in this case) cannot be used by both builtin and module consumers. Disable I2C_APPLE when I2C_PASEMI is a builtin to prevent this. [1]: https://lore.kernel.org/all/202112061809.XT99aPrf-lkp@intel.com Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-03thermal: intel: int340x: processor_thermal: Fix deadlockSrinivas Pandruvada
When user space updates the trip point there is a deadlock, which results in caller gets blocked forever. Commit 05eeee2b51b4 ("thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex"), added a mutex for tz->lock in the function trip_point_temp_store(). Hence, trip set callback() can't call any thermal zone API as they are protected with the same mutex lock. The callback here calling thermal_zone_device_enable(), which will result in deadlock. Move the thermal_zone_device_enable() to proc_thermal_pci_probe() to avoid this deadlock. Fixes: 05eeee2b51b4 ("thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: 6.2+ <stable@vger.kernel.org> # 6.2+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03Merge tag 'thermal-6.3-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more thermal control updates from Rafael Wysocki: "These fix two issues in the Intel thermal control drivers. Specifics: - Fix an error pointer dereference in the quark_dts Intel thermal driver (Dan Carpenter) - Fix the intel_bxt_pmic_thermal driver Kconfig entry to select REGMAP which is not user-visible instead of depending on it (Randy Dunlap)" * tag 'thermal-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: BXT_PMIC: select REGMAP instead of depending on it thermal: intel: quark_dts: fix error pointer dereference
2023-03-03Merge tag 'acpi-6.3-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These update ACPI quirks for some x86 platforms and add an IRQ override quirk for one more system. Specifics: - Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA (Vojtech Hejsek) - Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed any more after a firmware update (Mario Limonciello) - Add all Cezanne systems to the list for forcing StorageD3Enable, because they all need the same quirk (Mario Limonciello)" * tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable ACPI: x86: Drop quirk for HP Elitebook ACPI: resource: Skip IRQ override on Asus Expertbook B2402FBA
2023-03-03Merge tag 'pm-6.3-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update power capping (new hardware support and cleanup) and cpufreq (bug fixes, cleanups and intel_pstate adjustment for a new platform). Specifics: - Fix error handling in the apple-soc cpufreq driver (Dan Carpenter) - Change the log level of a message in the amd-pstate cpufreq driver so it is more visible to users (Kai-Heng Feng) - Adjust the balance_performance EPP value for Sapphire Rapids in the intel_pstate cpufreq driver (Srinivas Pandruvada) - Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick Alcock) - Make a read-only kobj_type structure in the schedutil cpufreq governor constant (Thomas Weißschuh) - Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL power capping driver (Sumeet Pawnikar)" * tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: apple-soc: Fix an IS_ERR() vs NULL check powercap: remove MODULE_LICENSE in non-modules cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules cpufreq: schedutil: make kobj_type structure constant cpufreq: amd-pstate: Let user know amd-pstate is disabled cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids
2023-03-03Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Don't access released socket during error recovery (Akinobu Mita) - Bring back auto-removal of deleted namespaces during sequential scan (Christoph Hellwig) - Fix an error code in nvme_auth_process_dhchap_challenge (Dan Carpenter) - Show well known discovery name (Daniel Wagner) - Add a missing endianess conversion in effects masking (Keith Busch) - Fix for a regression introduced in blk-rq-qos during init in this merge window (Breno) - Reorder a few fields in struct blk_mq_tag_set, eliminating a few holes and shrinking it (Christophe) - Remove redundant bdev_get_queue() NULL checks (Juhyung) - Add sed-opal single user mode support flag (Luca) - Remove SQE128 check in ublk as it isn't needed, saving some memory (Ming) - Op specific segment checking for cloned requests (Uday) - Exclusive open partition scan fixes (Yu) - Loop offset/size checking before assigning them in the device (Zhong) - Bio polling fixes (me) * tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux: blk-mq: enforce op-specific segment limits in blk_insert_cloned_request nvme-fabrics: show well known discovery name nvme-tcp: don't access released socket during error recovery nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge() nvme: bring back auto-removal of deleted namespaces during sequential scan blk-iocost: Pass gendisk to ioc_refresh_params nvme: fix sparse warning on effects masking block: be a bit more careful in checking for NULL bdev while polling block: clear bio->bi_bdev when putting a bio back in the cache loop: loop_set_status_from_info() check before assignment ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd block: remove more NULL checks after bdev_get_queue() blk-mq: Reorder fields in 'struct blk_mq_tag_set' block: fix scan partition for exclusively open device again block: Revert "block: Do not reread partition table on exclusively open device" sed-opal: add support flag for SUM in status ioctl
2023-03-03Merge tag 'ata-6.3-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fix from Damien Le Moal: - Revert commit 104ff59af73a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI controller") as it is causing serious regressions (failure to boot) on some laptops * tag 'ata-6.3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"
2023-03-03drm/msm/dpu: clear DSPP reservations in rm releaseKalyan Thota
Clear DSPP reservations from the global state during rm release Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver") Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/522443/ Link: https://lore.kernel.org/r/1676286704-818-2-git-send-email-quic_kalyant@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-03-03drm/msm/disp/dpu: fix sc7280_pp base offsetKuogee Hsieh
At sc7280, pingpong block is used to management the dither effects to reduce distortion at panel. Currently pingpong-0 base offset is wrongly set at 0x59000. This mistake will not cause system to crash. However it will make dither not work. This patch correct sc7280 ping pong-0 block base offset. Changes in v2: -- add more details info n regrading of pingpong block at commit text Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/524332/ Link: https://lore.kernel.org/r/1677533800-3125-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
generated by cgit (git 2.34.1) at 2025-09-25 19:59:56 +0000