summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 or later as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.848507137@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21drm/gma500/cdv: Check vbt config bits when detecting lvds panelsPatrik Jakobsson
Some machines have an lvds child device in vbt even though a panel is not attached. To make detection more reliable we now also check the lvds config bits available in the vbt. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1665766 Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416114607.1072-1-patrik.r.jakobsson@gmail.com
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an ↵Murray McAllister
invalid read If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID of SVGA3D_INVALID_ID, and a shader type of SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc() when the offset is calculated. Cc: <stable@vger.kernel.org> Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Murray McAllister <murray.mcallister@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-05-21drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()Murray McAllister
If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after vmw_cmd_res_check(), leading to a null pointer dereference in vmw_view_add(). Cc: <stable@vger.kernel.org> Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Murray McAllister <murray.mcallister@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-05-21drm/vmwgfx: Use the dma scatter-gather iterator to get dma addressesThomas Hellstrom
Use struct sg_dma_page_iter in favour struct of sg_page_iter, which fairly recently was declared useless for obtaining dma addresses. With a struct sg_dma_page_iter we can't call sg_page_iter_page() so when the page is needed, use the same page lookup mechanism as for the non-sg dma modes instead of calling sg_dma_page_iter. Note, the fixes tag doesn't really point to a commit introducing a failure / regression, but rather to a commit that implemented a simple workaround for this problem. Cc: Jason Gunthorpe <jgg@mellanox.com> Fixes: d901b2760dc6 ("lib/scatterlist: Provide a DMA page iterator") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21drm/vmwgfx: Fix compat mode shader operationThomas Hellstrom
In compat mode, we allowed host-backed user-space with guest-backed kernel / device. In this mode, set shader commands was broken since no relocations were emitted. Fix this. Cc: <stable@vger.kernel.org> Fixes: e8c66efbfe3a ("drm/vmwgfx: Make user resource lookups reference-free during validation") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2019-05-21drm/vmwgfx: Fix user space handle equal to zeroThomas Hellstrom
User-space handles equal to zero are interpreted as uninitialized or illegal by some drm systems (most notably kms). This means that a dumb buffer or surface with a zero user-space handle can never be used as a kms frame-buffer. Cc: <stable@vger.kernel.org> Fixes: c7eae62666ad ("drm/vmwgfx: Make the object handles idr-generated") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2019-05-21drm/vmwgfx: Don't send drm sysfs hotplug events on initial master setThomas Hellstrom
This may confuse user-space clients like plymouth that opens a drm file descriptor as a result of a hotplug event and then generates a new event... Cc: <stable@vger.kernel.org> Fixes: 5ea1734827bb ("drm/vmwgfx: Send a hotplug event at master_set") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2019-05-20libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overheadDan Williams
Jeff discovered that performance improves from ~375K iops to ~519K iops on a simple psync-write fio workload when moving the location of 'struct page' from the default PMEM location to DRAM. This result is surprising because the expectation is that 'struct page' for dax is only needed for third party references to dax mappings. For example, a dax-mapped buffer passed to another system call for direct-I/O requires 'struct page' for sending the request down the driver stack and pinning the page. There is no usage of 'struct page' for first party access to a file via read(2)/write(2) and friends. However, this "no page needed" expectation is violated by CONFIG_HARDENED_USERCOPY and the check_copy_size() performed in copy_from_iter_full_nocache() and copy_to_iter_mcsafe(). The check_heap_object() helper routine assumes the buffer is backed by a slab allocator (DRAM) page and applies some checks. Those checks are invalid, dax pages do not originate from the slab, and redundant, dax_iomap_actor() has already validated that the I/O is within bounds. Specifically that routine validates that the logical file offset is within bounds of the file, then it does a sector-to-pfn translation which validates that the physical mapping is within bounds of the block device. Bypass additional hardened usercopy overhead and call the 'no check' versions of the copy_{to,from}_iter operations directly. Fixes: 0aed55af8834 ("x86, uaccess: introduce copy_from_iter_flushcache...") Cc: <stable@vger.kernel.org> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <willy@infradead.org> Reported-and-tested-by: Jeff Smits <jeff.smits@intel.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-21drm/i915/gvt: Fix an error code in ppgtt_populate_spt_by_guest_entry()Dan Carpenter
"ret" is uninitialized on this path but it should be -EINVAL. Fixes: 930c8dfea4b8 ("drm/i915/gvt: Check if get_next_pt_type() always returns a valid value") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-05-21drm/i915/gvt: do not let TRTTE and 0x4dfc write passthrough to hardwareYan Zhao
the vGPU write on TRTTE and 0x4dfc is now write to vreg first. their values all be restored hardware when context switching. Fixes: e39c5add3221 ("drm/i915/gvt: vGPU MMIO virtualization") Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-05-21drm/i915/gvt: add 0x4dfc to gen9 save-restore listYan Zhao
0x4dfc is in-context mmio for gen9+, but each vm have different settings need to add it to save-restore list along with other trtt registers Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch") Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-05-21drm/i915/gvt: Tiled Resources mmios are in-context mmios for gen9+Yan Zhao
TRVATTL3PTRDW(0x4de0-0x4de4), TRNULLDETCT(0x4de8), TRINVTILEDETCT(0x4dec), TRTTE(0x4df0), TRVADR(0x4df4) are in-context mmios for gen9+ Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch") Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-05-21drm/i915/gvt: use cmd to restore in-context mmios to hw for gen9 platformYan Zhao
for restore-inhibit context, hardware will not load in-context mmios (engine context part) to hardware, but hardware will save the mmio values in hardware back to context image. So, in order to save correct values of vGPU back to context image, values of vGPU mmios have to be loaded into hardware first for restore-inhibit context. In this patch, the mechanism is applied to all gen9 platform. The reason excluding gen8 platforms is only because of lacking of testing on those platforms. v3: for mocs registers, goto in-context mmios save-restore path for skl platform as well (weinan li) v2: update vreg when scanning indirect context for inhibit context for gen9 Cc: Weinan Li <weinan.z.li@intel.com> Acked-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-05-21drm/i915/gvt: emit init breadcrumb for gvt requestWeinan
"To track whether a request has started on HW, we can emit a breadcrumb at the beginning of the request and check its timeline's HWSP to see if the breadcrumb has advanced past the start of this request." It means all the request which timeline's has_init_breadcrumb is true, then the emit_init_breadcrumb process must have before emitting the real commands, otherwise, the scheduler might get a wrong state of this request during reset. If the request is exactly the guilty one, the scheduler won't terminate it with the wrong state. To avoid this, do emit_init_breadcrumb for all the requests from gvt. v2: cc to stable kernel Fixes: 8547444137ec ("drm/i915: Identify active requests") Cc: stable@vger.kernel.org Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Weinan <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-05-20drm/amdkfd: Fix compute profile switchingHarish Kasiviswanathan
Fix compute profile switching on process termination. Add a dedicated reference counter to keep track of entry/exit to/from compute profile. This enables switching compute profiles for other reasons than process creation or termination. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20net: stmmac: dma channel control register need to be init firstWeifeng Voon
stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and stmmac_init_tx_chan(). This is because if PBLx8 is to be used, "DMA_CH(#i)_Control.PBLx8" needs to be set before programming "DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL". Fixes: 47f2a9ce527a ("net: stmmac: dma channel init prepared for multiple queues") Reviewed-by: Zhang, Baoli <baoli.zhang@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Weifeng Voon <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20net: stmmac: fix ethtool flow control not able to get/setTan, Tee Min
Currently ethtool was not able to get/set the flow control due to a missing "!". It will always return -EOPNOTSUPP even the device is flow control supported. This patch fixes the condition check for ethtool flow control get/set function for ETHTOOL_LINK_MODE_Asym_Pause_BIT. Fixes: 3c1bcc8614db (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”) Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20fddi: fix typos in code commentsWeitao Hou
fix abord to abort Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-202/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait functionKurt Kanzenbach
On loaded systems with a preemptible kernel the mdio_wait() function may report an error while everything is working fine: xemaclite_mdio_wait(): xemaclite_readl() -> chip not ready --> interrupt here (other work for some time / chip become ready) if (time_before_eq(end, jiffies)) --> false positive error report Replace the current code with readx_poll_timeout() which takes care of the situation. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-201/2] net: axienet: use readx_poll_timeout() in mdio wait functionKurt Kanzenbach
On loaded systems with a preemptible kernel the mdio_wait() function may report an error while everything is working fine: axienet_mdio_wait_until_ready(): axienet_ior() -> chip not ready --> interrupt here (other work for some time / chip become ready) if (time_before_eq(end, jiffies)) --> false positive error report Replace the current code with readx_poll_timeout() which take care of the situation. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20dax: Arrange for dax_supported check to span multiple devicesDan Williams
Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-20libnvdimm: Fix compilation warnings with W=1Qian Cai
Several places (dimm_devs.c, core.c etc) include label.h but only label.c uses NSINDEX_SIGNATURE, so move its definition to label.c instead. In file included from drivers/nvdimm/dimm_devs.c:23: drivers/nvdimm/label.h:41:19: warning: 'NSINDEX_SIGNATURE' defined but not used [-Wunused-const-variable=] Also, some places abuse "/**" which is only reserved for the kernel-doc. drivers/nvdimm/bus.c:648: warning: cannot understand function prototype: 'struct attribute_group nd_device_attribute_group = ' drivers/nvdimm/bus.c:677: warning: cannot understand function prototype: 'struct attribute_group nd_numa_attribute_group = ' Those are just some member assignments for the "struct attribute_group" instances and it can't be expressed in the kernel-doc. Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-20macvlan: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/macvlan.c: In function ‘macvlan_do_ioctl’: drivers/net/macvlan.c:839:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!net_eq(dev_net(dev), &init_net)) ^ drivers/net/macvlan.c:841:2: note: here case SIOCGHWTSTAMP: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages queryErez Alfasi
Querying EEPROM high pages data for SFP module is currently not supported by our driver but is still tried, resulting in invalid FW queries. Set the EEPROM ethtool data length to 256 for SFP module to limit the reading for page 0 only and prevent invalid FW queries. Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20drm/amdgpu: skip fw pri bo alloc for SRIOVYintian Tao
PSP fw primary buffer is not used under SRIOV. Under SRIOV, VBIOS or hypervisor driver will load psp sos and psp sysdrv. Therefore, we don't need to allocate memory for it. v2: remove superfluous check for amdgpu_bo_free_kernel(). Signed-off-by: Yintian Tao <yttao@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20drm/amd/powerplay: fix locking in smu_feature_set_supported()Dan Carpenter
There is a typo so the code unlocks twice instead of taking the lock and then releasing it. Fixes: f14a323db5b0 ("drm/amd/powerplay: implement update enabled feature state to smc for smu11") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20drm/amdgpu/gmc9: set vram_width properly for SR-IOVAlex Deucher
For SR-IOV, vram_width can't be read from ATOM as RAVEN, and DF related registers is not readable, so hardcord is the only way to set the correct vram_width. Reviewed-by: Yintian Tao <yttao@amd.com> Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Signed-off-by: Yintian Tao <yttao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20drm/amdgpu/soc15: skip reset on initAlex Deucher
Not necessary on soc15 and breaks driver reload on server cards. Acked-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-05-20drm/amdgpu: keep stolen memory on picassoFlora Cui
otherwise screen corrupts during modprobe. Signed-off-by: Flora Cui <flora.cui@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20drm/amdkfd: Add missing Polaris10 IDKent Russell
This was added to amdgpu but was missed in amdkfd Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.rg
2019-05-20drm/amd/display: Don't load DMCU for Raven 1Harry Wentland
[WHY] Some early Raven boards had a bad SBIOS that doesn't play nicely with the DMCU FW. We thought the issues were fixed by ignoring errors on DMCU load but that doesn't seem to be the case. We've still seen reports of users unable to boot their systems at all. [HOW] Disable DMCU load on Raven 1. Only load it for Raven 2 and Picasso. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-05-20drm/amd/display: Add ASICREV_IS_PICASSOHarry Wentland
[WHY] We only want to load DMCU FW on Picasso and Raven 2, not on Raven 1. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-05-20drm/i915: Truly bump ready tasks ahead of busywaitsChris Wilson
In commit b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits"), I tried cutting a corner in order to not install a signal for each of our dependencies, and only listened to requests on which we were intending to busywait. The compromise that was made was that instead of then being able to promote the request with a full NOSEMAPHORE like its non-busywaiting brethren, as we had not ensured we had cleared the semaphore chain, we settled for only using the NEWCLIENT boost. With an over saturated system with multiple NEWCLIENTS in flight at any time, this was found to be an inadequate promotion and left us with a much poorer scheduling order than prior to using semaphores. The outcome of this patch, is that all requests have NOSEMAPHORE priority when they have no dependencies and are ready to run and not busywait, restoring the pre-semaphore ordering on saturated systems. We can demonstrate the effect of poor scheduling order by oversaturating the system using gem_wsim on a system with multiple vcs engines (i.e running the same workloads across more clients than required for peak throughput, e.g. media_load_balance_17i7.wsim -c4 -b context): x v5.1 (normalized) + tip * fix +------------------------------------------------------------------------+ | x | | x | | x | | x | | %x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %#x | | %#x | | %#x | | %#x | | %#x | | + %#xx | | + %#xx | | + %%#xx | | + %%#xx | | + %%#xx | | + %%#xx | | + %%##x | | +++ %%##x | | +++ %%##x | | +++ %%##x | | ++++ %%##x | | ++++ %%##x | | ++++ %%##xx | | ++++ %###xx | | ++++ %###xx | | ++++ %###xx | | ++++ %###xx | | ++++ + %#O#xx | | ++++ + %#O#xx | | ++++++ + %#O#xx | | ++++++++++ %OOOxxx| | ++++++++++ + %#OOO#xx| | + ++++++++++++ ++ +++++ + ++ @@OOOO#xx| | |A_| | ||__________M_______A____________________| | | |A_| | +------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 120 0.99456 1.00628 0.999985 1.0001545 0.0024387139 + 120 0.873021 1.00037 0.884134 0.90148752 0.039190862 Difference at 99.5% confidence -0.098667 +/- 0.0110762 -9.86517% +/- 1.10745% (Student's t, pooled s = 0.0277657) % 120 0.990207 1.00165 0.9970265 0.99699748 0.0021024 Difference at 99.5% confidence -0.003157 +/- 0.000908245 -0.315651% +/- 0.0908105% (Student's t, pooled s = 0.00227678) Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Dmitry Ermilov <dmitry.ermilov@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-2-chris@chris-wilson.co.uk (cherry picked from commit 17db337f5098d29415314c4a588b842fc684394b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20drm/i915: Downgrade NEWCLIENT to non-preemptiveChris Wilson
Commit 1413b2bc0717 ("drm/i915: Trim NEWCLIENT boosting") had the intended consequence of not allowing a sequence of work that merely crossed into a new engine the privilege to be promoted to NEWCLIENT status. It also had the unintended consequence of actually making NEWCLIENT effective on heavily oversubscribed transcode machines and impacting upon their throughput. If we consider a client packet composed of (rcsA, rcsB, vcs) and 30 of those clients, using the NEWCLIENT boost that will be scheduled as rcsA x 30, (rcsB, vcs) x 30 where as before it would have been (rcsA, rcsB, vcs) x 30 That is with NEWCLIENT only boosting the first request of each client, we would execute all rcsA requests prior to running on the vcs engines; acruing a lot of dead time as compared to the previous case where the vcs engine would be started in parallel to processing the second client. The previous patch has the effect of delaying submission until it is required by a third party (either the user with an explicit wait, or by another client/engine). We reduce the NEWCLIENT bump to a mere WAIT, which has the effect of removing its preemptive grant and reducing it to the same level as any other user interaction -- that it will not be promoted above the interengine dependencies, and so preventing NEWCLIENTS from starving other engines. This a large nerf to the rrul properties of the current NEWCLIENT, but it still does give prioritised submission to new requests from light workloads. References: b16c765122f9 ("drm/i915: Priority boost for new clients") Fixes: 1413b2bc0717 ("drm/i915: Trim NEWCLIENT boosting") # customer impact Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Dmitry Ermilov <dmitry.ermilov@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-4-chris@chris-wilson.co.uk (cherry picked from commit 68fc728b01fcc93b26d52f6e884e738962a49a66) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20drm/i915: Bump signaler priority on adding a waiterChris Wilson
The handling of the no-preemption priority level imposes the restriction that we need to maintain the implied ordering even though preemption is disabled. Otherwise we may end up with an AB-BA deadlock across multiple engine due to a real preemption event reordering the no-preemption WAITs. To resolve this issue we currently promote all requests to WAIT on unsubmission, however this interferes with the timeslicing requirement that we do not apply any implicit promotion that will defeat the round-robin timeslice list. (If we automatically promote the active request it will go back to the head of the queue and not the tail!) So we need implicit promotion to prevent reordering around semaphores where we are not allowed to preempt, and we must avoid implicit promotion on unsubmission. So instead of at unsubmit, if we apply that implicit promotion on adding the dependency, we avoid the semaphore deadlock and we also reduce the gains made by the promotion for user space waiting. Furthermore, by keeping the earlier dependencies at a higher level, we reduce the search space for timeslicing without altering runtime scheduling too badly (no dependencies at all will be assigned a higher priority for rrul). v2: Limit the bump to external edges (as originally intended) i.e. between contexts and out to the user. Testcase: igt/gem_concurrent_blit Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-3-chris@chris-wilson.co.uk (cherry picked from commit 6e7eb7a80769e7250e31652b96918cf7f3e0d285) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20drm/i915: Pass i915_sched_node around internallyChris Wilson
To simplify the next patch, update bump_priority and schedule to accept the internal i915_sched_ndoe directly and not expect a request pointer. add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7) Function old new delta i915_schedule_bump_priority 109 113 +4 i915_schedule 50 54 +4 __i915_schedule 922 907 -15 v2: Adopt node for the old rq local, since it no longer is a request but the origin node. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-2-chris@chris-wilson.co.uk (cherry picked from commit 52c76fb18a34fc08dd06f32b9fc83f1375f083ee) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20drm/i915: Rearrange i915_scheduler.cChris Wilson
To avoid pulling in a forward declaration in the next patch, move the i915_sched_node handling to after the main dfs of the scheduler. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-1-chris@chris-wilson.co.uk (cherry picked from commit 5ae87063c162679a61f2141041d0918cc3045daf) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet. 1) Use after free in __dev_map_entry_free(), from Eric Dumazet. 2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung Cheng. 3) Orphan NFC, we'll take the patches directly into my tree. From Johannes Berg. 4) We can't recycle cloned TCP skbs, from Eric Dumazet. 5) Some flow dissector bpf test fixes, from Stanislav Fomichev. 6) Fix RCU marking and warnings in rhashtable, from Herbert Xu. 7) Fix some potential fib6 leaks, from Eric Dumazet. 8) Fix a _decode_session4 uninitialized memory read bug fix that got lost in a merge. From Florian Westphal. 9) Fix ipv6 source address routing wrt. exception route entries, from Wei Wang. 10) The netdev_xmit_more() conversion was not done %100 properly in mlx5 driver, fix from Tariq Toukan. 11) Clean up botched merge on netfilter kselftest, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits) of_net: fix of_get_mac_address retval if compiled without CONFIG_OF net: fix kernel-doc warnings for socket.c net: Treat sock->sk_drops as an unsigned int when printing kselftests: netfilter: fix leftover net/net-next merge conflict mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM mlxsw: core: Prevent QSFP module initialization for old hardware vsock/virtio: Initialize core virtio vsock before registering the driver net/mlx5e: Fix possible modify header actions memory leak net/mlx5e: Fix no rewrite fields with the same match net/mlx5e: Additional check for flow destination comparison net/mlx5e: Add missing ethtool driver info for representors net/mlx5e: Fix number of vports for ingress ACL configuration net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled net/mlx5e: Fix wrong xmit_more application net/mlx5: Fix peer pf disable hca command net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index net/mlx5: Add meaningful return codes to status_to_err function net/mlx5: Imply MLXFW in mlx5_core Revert "tipc: fix modprobe tipc failed after switch order of device registration" vsock/virtio: free packets during the socket release ...
2019-05-20Merge drm-misc-next-fixes-2019-05-20 into drm-misc-fixesSean Paul
Picking up 3 sun4i patches that missed the last drm-misc-next-fixes pull request for 5.2 Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-05-20Revert "scsi: sd: Keep disk read-only when re-reading partition"Martin K. Petersen
This reverts commit 20bd1d026aacc5399464f8328f305985c493cde3. This patch introduced regressions for devices that come online in read-only state and subsequently switch to read-write. Given how the partition code is currently implemented it is not possible to persist the read-only flag across a device revalidate call. This may need to get addressed in the future since it is common for user applications to proactively call BLKRRPART. Reverting this commit will re-introduce a regression where a device-initiated revalidate event will cause the admin state to be forgotten. A separate patch will address this issue. Fixes: 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition") Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20scsi: bnx2fc: fix incorrect cast to u64 on shift operationColin Ian King
Currently an int is being shifted and the result is being cast to a u64 which leads to undefined behaviour if the shift is more than 31 bits. Fix this by casting the integer value 1 to u64 before the shift operation. Addresses-Coverity: ("Bad shift operation") Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20scsi: smartpqi: Reporting unhandled SCSI errorsErwan Velu
When a HARDWARE_ERROR is triggered for ASC=0x3e, the existing code is only considering the case where ASCQ=0x1. According to the http://www.t10.org/lists/asc-num.htm#ASC_3E specification, other values may occur like a timeout (ASCQ=0x2). This patch prints an error message when a non-handled message is received. This can help diagnose a possible misbehavior of the controller or a missing implementation in the Linux kernel. This patch keeps the exact same error handling but prints a message if an ASCQ != 1 is reported. [mkp: clarified commit message] Signed-off-by: Erwan Velu <e.velu@criteo.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20scsi: myrs: Fix uninitialized variableYueHaibing
drivers/scsi/myrs.c: In function 'myrs_log_event': drivers/scsi/myrs.c:821:24: warning: 'sshdr.sense_key' may be used uninitialized in this function [-Wmaybe-uninitialized] struct scsi_sense_hdr sshdr; If ev->ev_code is not 0x1C, sshdr.sense_key may be used uninitialized. Fix this by initializing variable 'sshdr' to 0. Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20platform/x86: pmc_atom: Add several Beckhoff Automation boards to ↵Steffen Dirkwinkel
critclk_systems DMI table There are several Beckhoff Automation industrial PC boards which use pmc_plt_clk* clocks for ethernet controllers. This adds affected boards to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and not turned off. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-05-20platform/x86: pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI ↵Hans de Goede
table The Lex 3I380D industrial PC has 4 ethernet controllers on board which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks as CLK_CRITICAL and they will not get turned off. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reported-and-tested-by: Semyon Verchenko <semverchenko@factor-ts.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-25 21:20:10 +0000