summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-07-06Merge tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: - bam_dma fix for completed descriptor count - fix for imx-sdma remove BD_INTR for channel0 and use-after-free on probe error path - endian bug fix in jz4780 IRQ handler * tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: qcom: bam_dma: Fix completed descriptors count dmaengine: imx-sdma: remove BD_INTR for channel0 dmaengine: imx-sdma: fix use-after-free on probe error path dmaengine: jz4780: Fix an endian bug in IRQ handler
2019-07-06Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two iscsi fixes. One for an oops in the client which can be triggered by the server authentication protocol and the other in the target code which causes data corruption" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported scsi: target/iblock: Fix overrun in WRITE SAME emulation
2019-07-06Merge branch 'asoc-5.3' into asoc-nextMark Brown
2019-07-06Bluetooth: Add new 13d3:3491 QCA_ROME deviceJoão Paulo Rechi Vita
Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3491 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add new 13d3:3501 QCA_ROME deviceJoão Paulo Rechi Vita
Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3501 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_bcsp: Fix memory leak in rx_skbTomas Bortoli
Syzkaller found that it is possible to provoke a memory leak by never freeing rx_skb in struct bcsp_struct. Fix by freeing in bcsp_close() Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth:: btrtl: Add support for RTL8723DULarry Finger
This device is functionally equivalent to the BT part of the RTL8723DE, uses the same firmware, but the LMP subversion and HCI revision are unique. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btmtkuart: add an implementation for clock osc propertySean Wang
Some board requires explicitily control external osscilator via GPIO. So, add an implementation of a clock property for an external oscillator to the device. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btmtkuart: add an implementation for boot-gpios propertySean Wang
Not every platform has the pinctrl device integrates the GPIO the function such as MT7621 whose pinctrl and GPIO are separate hardware so the driver adds additional boot-gpios to let the MT766[3,8]U can enter the proper boot mode by gpiod for such platform. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btbcm: Add entry for BCM4359C0 UART bluetoothNeil Armstrong
The BCM4359C0 BT/Wi-Fi compo chip needs an entry to be discovered by the btbcm driver. Tested using an AP6398S module from Ampak. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_qca: Load customized NVM based on the device propertyRocky Liao
QCA BTSOC NVM is a customized firmware file and different vendors may want to have different BTSOC configuration (e.g. Configure SCO over PCM or I2S, Setting Tx power, etc.) via this file. This patch will allow vendors to download different NVM firmware file by reading a device property "firmware-name". Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_mrvl: Add serdev supportSascha Hauer
This adds serdev support to the Marvell hci uart driver. Only basic serdev support, none of the fancier features like regulator or enable GPIO support is added for now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_mrvl: Wait for final ack before switching baudrateSascha Hauer
For the Marvell HCI UART we have to upload two firmware files. The first one is only for switching the baudrate of the device to a higher baudrate. After the baudrate switching firmware has been uploaded the device waits for a final ack (0x5a) before actually switching the baudrate. To send this final ack with the old baudrate give the hci ldisc workqueue a chance to run before switching the baudrate. Without this the final ack will never be received by the device and firmware upload fails. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ldisc: Add function to wait for characters to be sentSascha Hauer
The hci UART line discipline sends its characters in a workqueue. Some devices like the Marvell Bluetooth chips need to make sure that all queued characters are sent before switching the baudrate. This adds a function to synchronize with the workqueue. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor eventMatthias Kaehlcke
Firmware download to the WCN3990 often fails with a 'TLV response size mismatch' error: [ 133.064659] Bluetooth: hci0: setting up wcn3990 [ 133.489150] Bluetooth: hci0: QCA controller version 0x02140201 [ 133.495245] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 133.507214] Bluetooth: hci0: QCA TLV response size mismatch [ 133.513265] Bluetooth: hci0: QCA Failed to download patch (-84) This is caused by a vendor event that corresponds to an earlier command to change the baudrate. The event is not processed in the context of the baudrate change and is later interpreted as response to the firmware download command (which is also a vendor command), but the driver detects that the event doesn't have the expected amount of associated data. More details: For the WCN3990 the vendor command for a baudrate change isn't sent as synchronous HCI command, because the controller sends the corresponding vendor event with the new baudrate. The event is received and decoded after the baudrate change of the host port. Identify the 'unused' event when it is received and don't add it to the queue of RX frames. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btqca: inject command complete event during fw downloadBalakrishna Godavarthi
Latest qualcomm chips are not sending an command complete event for every firmware packet sent to chip. They only respond with a vendor specific event for the last firmware packet. This optimization will decrease the BT ON time. Due to this we are seeing a timeout error message logs on the console during firmware download. Now we are injecting a command complete event once we receive an vendor specific event for the last RAM firmware packet. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Cleanup formatting and coding styleFabian Schindlatz
Fix some warnings and one error reported by checkpatch.pl: - lines longer than 80 characters are wrapped - empty lines inserted to separate variable declarations from the actual code - line break inserted after if (...) Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Cc: linux-kernel@i4.cs.fau.de Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btrtl: HCI reset on close for Realtek BT chipJian-Hong Pan
Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly after on-off several times. Bluetooth daemon sets BT mode failed when this issue happens. Scanning must be active while turning off for this bug to be hit. bluetoothd[1576]: Failed to set mode: Failed (0x03) If BT is turned off, then turned on again, it works correctly again. According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set during probing. So, this patch makes Realtek's BT reset on close to fix this issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ll: Refactor download_firmwareFabian Schindlatz
Extract the new function send_command_from_firmware from download_firmware, which helps with the readability of the switch statement. This way the code is less deeply nested and also no longer exceeds the 80 character limit. Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ll: set operational frequency earlierPhilipp Puschmann
Uploading the firmware needs quite a few seconds if done at 115200 kbps. So set the operational frequency, usually 3 MHz, before uploading the firmware. I have successfully tested this with a wl1837mod. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btsdio: Do not bind to non-removable BCM4356Peter Robinson
BCM4356 devices soldered onto the PCB (non-removable) use an UART connection for bluetooth, such as the Rock960, but it also advertise btsdio support as a sdio function. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> CC: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06ACPI: PM: Make acpi_sleep_state_supported() non-staticDexuan Cui
With some upcoming patches to save/restore the Hyper-V drivers related states, a Linux VM running on Hyper-V will be able to hibernate. When a Linux VM hibernates, unluckily we must disable the memory hot-add/remove and balloon up/down capabilities in the hv_balloon driver (drivers/hv/hv_balloon.c), because these can not really work according to the design of the related back-end driver on the host. By default, Hyper-V does not enable the virtual ACPI S4 state for a VM; on recent Hyper-V hosts, the administrator is able to enable the virtual ACPI S4 state for a VM, so we hope to use the presence of the virtual ACPI S4 state as a hint for hv_balloon to disable the aforementioned capabilities. In this way, hibernation will work more reliably, from the user's perspective. By marking acpi_sleep_state_supported() non-static, we'll be able to implement a hv_is_hibernation_supported() API in the always-built-in module arch/x86/hyperv/hv_init.c, and the API will be called by hv_balloon. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-05Merge tag 'mtd/fixes-for-5.2-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtf fixes from Miquel Raynal: - Fix the memory organization structure of a Macronix SPI-NAND chip. - Fix a build dependency wrongly described. - Fix the sunxi NAND driver for A23/A33 SoCs by (a) reverting the faulty commit introducing broken DMA support and (b) applying another commit bringing working DMA support. * tag 'mtd/fixes-for-5.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configuration Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support" mtd: rawnand: ingenic: Fix ingenic_ecc dependency mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorg
2019-07-05net/mlx5e: Add kTLS TX HW offload supportTariq Toukan
Add support for transmit side kernel-TLS acceleration. Offload the crypto encryption to HW. Per TLS connection: - Use a separate TIS to maintain the HW context. - Use a separate encryption key. - Maintain static and progress HW contexts by posting the proper WQEs at creation time, or upon resync. - Use a special DUMP opcode to replay the previous frags and sync the HW context. To make sure the SQ is able to serve an xmit request, increase SQ stop room to cover: - static params WQE, - progress params WQE, and - resync DUMP per frag. Currently supporting TLS 1.2, and key size 128bit. Tested over SimX simulator. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Introduce a fenced NOP WQE posting functionTariq Toukan
Similar to the existing mlx5e_post_nop(), but marks a fence in the WQE control segment. Added as a separate new function to not hurt the performance of the common case. To be used in a downstream patch of the series. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Re-work TIS creation functionsTariq Toukan
Let the EN TIS creation function (mlx5e_create_tis) be responsible for applying common mdev related fields. Other specific fields must be set by the caller and passed within the inbox. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Unconstify SQ stop roomTariq Toukan
Use an SQ field for stop_room, and use the larger value only if TLS is supported. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Don't implicitly assume SKB-less wqe has one WQEBBEran Ben Elisha
When polling a CQE of an SKB-less WQE, don't assume it consumed only one WQEBB. Use wi->num_wqebbs directly instead. In the downstream patch, SKB-less WQEs might have more the one WQEBB, thus this change is needed. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Make SQ WQE fetch function type genericTariq Toukan
Change mlx5e_sq_fetch_wqe to be agnostic to the Work Queue Element (WQE) type. Before this patch, it was specific for struct mlx5e_tx_wqe. In order to allow the change, the function now returns the generic void pointer, and gets the WQE size to do the zero memset. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Enforce L4 inline copy when neededTariq Toukan
When ctrl->tisn field exists, this indicates an operation (HW offload) on the TCP payload. For such WQEs, inline the headers up to L4. This is in preparation for kTLS HW offload support, added in a downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Move helper functions to a new txrx datapath headerTariq Toukan
Take datapath helper functions to a new header file en/txrx.h. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5: Accel, Add core TLS support for the Connect-X familyTariq Toukan
Add support for the new TLS implementation of the Connect-X family. Introduce a new compilation flag MLX5_TLS for it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5: Add crypto library to support create/destroy encryption keyTariq Toukan
Encryption key create / destroy is done via CREATE_GENERAL_OBJECT / DESTROY_GENERAL_OBJECT commands. To be used in downstream patches by TLS API wrappers, to configure the TIS context with the encryption key. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5: Kconfig, Better organize compilation flagsTariq Toukan
Always contain all acceleration functions declarations in 'accel' files, independent to the flags setting. For this, introduce new flags CONFIG_FPGA_{IPSEC/TLS} and use stubs where needed. This obsoletes the need for stubs in 'fpga' files. Remove them. Also use the new flags in Makefile, to decide whether to compile TLS-specific or IPSEC-specific objects, or not. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5: Accel, Expose accel wrapper for IPsec FPGA functionTariq Toukan
Do not directly call fpga version of IPsec function from main.c. Wrap it by an accel version, and call the wrapper. This will allow deprecating the FPGA IPsec stubs in downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05Merge tag 'mlx5-updates-2019-07-04-v2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-update-2019-07-04 This series adds mlx5 support for devlink fw versions query. 1) Implement the required low level firmware commands 2) Implement the devlink knobs and callbacks for fw versions query. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05nfp: Use spinlock_t instead of struct spinlockSebastian Andrzej Siewior
For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use spinlock_t for spinlock's definition. Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: oss-drivers@netronome.com Cc: netdev@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: netsec: Sync dma for device on buffer allocationIlias Apalodimas
Quoting Arnd, We have to do a sync_single_for_device /somewhere/ before the buffer is given to the device. On a non-cache-coherent machine with a write-back cache, there may be dirty cache lines that get written back after the device DMA's data into it (e.g. from a previous memset from before the buffer got freed), so you absolutely need to flush any dirty cache lines on it first. Since the coherency is configurable in this device make sure we cover all configurations by explicitly syncing the allocated buffer for the device before refilling it's descriptors Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: set maximum length to resp_data_len for exceptional casePeng Li
If HCLGE_MBX_MAX_RESP_DATA_SIZE > HCLGE_MBX_MAX_RESP_DATA_SIZE, the memcpy will cause out of memory. So this patch just set resp_data_len to the maximum length for this case. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: bitwise operator should use unsigned typeYonglong Liu
There are some bitwise operator used signed type, this patch fixes them with unsigned type. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: add default value for tc_size and tc_offsetPeng Li
This patch adds default value for tc_size and tc_offset, or it may get random value and used later. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: check msg_data before memcpy in hclgevf_send_mbx_msgWeihang Li
The value of msg_data may be NULL in some cases, which will cause errors reported by some compiler. So this patch adds a check to fix it. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: set default value for param "type" in hclgevf_bind_ring_to_vectorPeng Li
The value of param type is always not changed in hclgevf_bind_ring_to_vector, move the assignment to front of "for {}" can reduce the redundant assignment. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: add all IMP return codePeng Li
Currently, the HNS3 driver just defines part of IMP return code, This patch supplements all the remaining IMP return code, and adds a function to convert this code to the error number. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: fix port capbility updating issueJian Shen
Currently, the driver queries the media port information, and updates the port capability periodically. But it sets an error mac->speed_type value, which stops update port capability. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: fix flow control configure issue for fibre portJian Shen
Flow control autoneg is unsupported for fibre port. It takes no effect for flow control when restart autoneg. This patch fixes it, return -EOPNOTSUPP when user tries to enable flow control autoneg. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: enable broadcast promisc mode when initializing VFJian Shen
For revision 0x20, the broadcast promisc is enabled by firmware, it's unnecessary to enable it when initializing VF. For revision 0x21, it's necessary to enable broadcast promisc mode when initializing or re-initializing VF, otherwise, it will be unable to send and receive promisc packets. Fixes: f01f5559cac8 ("net: hns3: don't allow vf to enable promisc mode") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05r8152: set RTL8152_UNPLUG only for real disconnectionHayes Wang
Set the flag of RTL8152_UNPLUG if and only if the device is unplugged. Some error codes sometimes don't mean the real disconnection of usb device. For those situations, set the flag of RTL8152_UNPLUG causes the driver skips some flows of disabling the device, and it let the device stay at incorrect state. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum_ptp: Apply the PTP shaper enable/disable logicShalom Toledo
Apply by filling the PTP shaper parameters array. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum: Set up PTP shaper when port status has changedShalom Toledo
When getting port up down event (PUDE), change the PTP shaper configuration based on hardware time stamping on/off and the port's speed. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-28 14:30:56 +0000