summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-07-03Merge branches 'acpi-pmic', 'acpi-misc' and 'acpi-tables'Rafael J. Wysocki
* acpi-pmic: ACPI / PMIC: xpower: Add support for the GPI1 regulator to the OpRegion handler * acpi-misc: ACPI: fix whitespace in pr_fmt() to align log entries * acpi-tables: ACPI: configfs: Unload SSDT on configfs entry removal
2017-07-03Merge branch 'acpica'Rafael J. Wysocki
* acpica: (53 commits) ACPICA: Use designated initializers ACPICA: Update version to 20170531 ACPICA: Update a couple of debug output messages ACPICA: acpiexec: enhance local signal handler ACPICA: Simplify output for the ACPI Debug Object ACPICA: Unix application OSL: Correctly handle control-c (EINTR) ACPICA: Improvements for debug output only ACPICA: Disassembler: allow conflicting external declarations to be emitted. ACPICA: Disassembler: add external op to namespace on first pass ACPICA: Disassembler: prevent external op's from opening a new scope ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag ACPICA: Changing External to a named object ACPICA: Update two error messages to emit control method name ACPICA: Fix for Device/Thermal objects with ObjectType and DerefOf ACPICA: Comment update: spelling/format. No functional change ACPICA: Update comments, no functional change ACPICA: Split resource descriptor decode strings to a new file ACPICA: Remove extraneous status check ACPICA: Export the public mutex interfaces ACPICA: Disassembler: Abort on an invalid/unknown AML opcode ...
2017-07-03Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: PM / core: Drop run_wake flag from struct dev_pm_info PCI / PM: Simplify device wakeup settings code PCI / PM: Drop pme_interrupt flag from struct pci_dev ACPI / PM: Consolidate device wakeup settings code ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems platform: x86: intel-hid: Wake up the system from suspend-to-idle platform: x86: intel-vbtn: Wake up the system from suspend-to-idle ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle platform/x86: Add driver for ACPI INT0002 Virtual GPIO device PCI / PM: Restore PME Enable if skipping wakeup setup PM / sleep: Print timing information if debug is enabled ACPI / PM: Clean up device wakeup enable/disable code ACPI / PM: Change log level of wakeup-related message USB / PCI / PM: Allow the PCI core to do the resume cleanup ACPI / PM: Run wakeup notify handlers synchronously Conflicts: drivers/base/power/main.c
2017-07-03Merge branches 'pm-domains', 'pm-avs' and 'powercap'Rafael J. Wysocki
* pm-domains: PM / Domains: Fix missing default_power_down_ok comment PM / Domains: Fix unsafe iteration over modified list of domains PM / Domains: Fix unsafe iteration over modified list of domain providers PM / Domains: Fix unsafe iteration over modified list of device links PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device PM / Domains: Call driver's noirq callbacks PM / Domains: Constify genpd pointer PM / Domains: pdd->dev can't be NULL in genpd_dev_pm_qos_notifier() * pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for rk3228 * powercap: powercap/RAPL: prevent overridding bits outside of the mask
2017-07-03Merge branches 'pm-core', 'pm-opp' and 'pm-qos'Rafael J. Wysocki
* pm-core: PM / sysfs: Constify attribute groups PM: Constify info string used in messages PM: Constify returned PM event name PM / wakeirq: Convert to SRCU * pm-opp: PM / OPP: Add dev_pm_opp_{set|put}_clkname() PM / OPP: Use - instead of @ for DT entries PM / OPP: Don't create debugfs "supply-0" directory unnecessarily PM / OPP: opp-microvolt is not optional if regulators are set PM / OPP: Don't create copy of regulators unnecessarily PM / OPP: Reorganize _generic_set_opp_regulator() * pm-qos: PM / QoS: constify *_attribute_group.
2017-07-03Merge branches 'pm-cpufreq', 'intel_pstate' and 'pm-cpuidle'Rafael J. Wysocki
* pm-cpufreq: cpufreq / CPPC: Initialize policy->min to lowest nonlinear performance cpufreq: sfi: make freq_table static cpufreq: exynos5440: Fix inconsistent indenting cpufreq: imx6q: imx6ull should use the same flow as imx6ul cpufreq: dt: Add support for hi3660 * intel_pstate: cpufreq: Update scaling_cur_freq documentation cpufreq: intel_pstate: Clean up after performance governor changes intel_pstate: skip scheduler hook when in "performance" mode intel_pstate: delete scheduler hook in HWP mode x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF cpufreq: intel_pstate: Remove max/min fractions to limit performance x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz" * pm-cpuidle: cpuidle: menu: allow state 0 to be disabled intel_idle: Use more common logging style x86/ACPI/cstate: Allow ACPI C1 FFH MWAIT use on AMD systems ARM: cpuidle: Support asymmetric idle definition
2017-07-03Merge branch 'pm-tools'Rafael J. Wysocki
* pm-tools: cpupower: Add support for new AMD family 0x17 cpupower: Fix bug where return value was not used tools/power turbostat: update version number tools/power turbostat: decode MSR_IA32_MISC_ENABLE only on Intel tools/power turbostat: stop migrating, unless '-m' tools/power turbostat: if --debug, print sampling overhead tools/power turbostat: hide SKL counters, when not requested intel_pstate: use updated msr-index.h HWP.EPP values tools/power x86_energy_perf_policy: support HWP.EPP x86: msr-index.h: fix shifts to ULL results in HWP macros. x86: msr-index.h: define HWP.EPP values x86: msr-index.h: define EPB mid-points
2017-07-03Merge branch 'uuid-types'Rafael J. Wysocki
Merge 'uuid-types' from git://git.infradead.org/users/hch/uuid.git
2017-07-03Merge https://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some overlapping changes in the mlx5 driver. A merge conflict resolution posted by Stephen Rothwell was used as a guide. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03mlx4_en: make mlx4_log_num_mgm_entry_size staticZhu Yanjun
The variable mlx4_log_num_mgm_entry_size is only called in main.c. CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03netxen_nic: Remove unused pointer hdr in netxen_setup_minidump()Christos Gkekas
Pointer hdr in netxen_setup_minidump() is set but never used, thus should be removed. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03geneve: fix hlist corruptionJiri Benc
It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: 8ed66f0e8235 ("geneve: implement support for IPv6-based tunnels") Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03vxlan: fix hlist corruptionJiri Benc
It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03net/mlxfw: Properly handle dependancy with non-loadable mlx5Or Gerlitz
If mlx5 is set to be built-in and mlxfw as a module, we get a link error: drivers/built-in.o: In function `mlx5_firmware_flash': (.text+0x5aed72): undefined reference to `mlxfw_firmware_flash' Since we don't want to mandate selecting mlxfw for mlx5 users, we use the IS_REACHABLE macro to make sure that a stub is exposed to the caller. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Jakub Kicinski <kubakici@wp.pl> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03ctcm_fsms: Convert skb->user accesses to refcount_tDavid S. Miller
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03net: cdc_mbim: apply "NDP to end" quirk to HP lt4132Tore Anderson
The HP lt4132 LTE/HSPA+ 4G Module (03f0:a31d) is a rebranded Huawei ME906s-158 device. It, like the ME906s-158, requires the "NDP to end" quirk for correct operation. Signed-off-by: Tore Anderson <tore@fud.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03vxlan: correctly set vxlan->net when creating the device in a netnsSabrina Dubroca
Commit a985343ba906 ("vxlan: refactor verification and application of configuration") modified vxlan device creation, and replaced the assignment of vxlan->net to src_net with dev_net(netdev) in ->setup(). But dev_net(netdev) is not the same as src_net. At the time ->setup() is called, dev_net hasn't been set yet, so we end up creating the socket for the vxlan device in init_net. Fix this by bringing back the assignment of vxlan->net during device creation. Fixes: a985343ba906 ("vxlan: refactor verification and application of configuration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03net: hns: Use phy_driver to setup Phy loopbackLin Yun Sheng
Use function set_loopback in phy_driver to setup phy loopback when doing ethtool self test. Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03net: phy: Add phy loopback support in net phy frameworkLin Yun Sheng
This patch add set_loopback in phy_driver, which is used by MAC driver to enable or disable phy loopback. it also add a generic genphy_loopback function, which use BMCR loopback bit to enable or disable loopback. Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03net/mlx5: fix memcpy limit?Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03net: cdc_ncm: Reduce memory use when kernel memory lowJim Baxter
The CDC-NCM driver can require large amounts of memory to create skb's and this can be a problem when the memory becomes fragmented. This especially affects embedded systems that have constrained resources but wish to maximise the throughput of CDC-NCM with 16KiB NTB's. The issue is after running for a while the kernel memory can become fragmented and it needs compacting. If the NTB allocation is needed before the memory has been compacted the atomic allocation can fail which can cause increased latency, large re-transmissions or disconnections depending upon the data being transmitted at the time. This situation occurs for less than a second until the kernel has compacted the memory but the failed devices can take a lot longer to recover from the failed TX packets. To ease this temporary situation I modified the CDC-NCM TX path to temporarily switch into a reduced memory mode which allocates an NTB that will fit into a USB_CDC_NCM_NTB_MIN_OUT_SIZE (default 2048 Bytes) sized memory block and only transmit NTB's with a single network frame until the memory situation is resolved. Each time this issue occurs we wait for an increasing number of reduced size allocations before requesting a full size one to not put additional pressure on a low memory system. Once the memory is compacted the CDC-NCM data can resume transmitting at the normal tx_max rate once again. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Add iWARP support for physical queue allocationKalderon, Michal
iWARP has different physical queue requirements than RoCE Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Add iWARP protocol support in context allocationKalderon, Michal
When computing how much memory is required for the different hw clients iWARP protocol should be taken into account Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM add error handlingKalderon, Michal
This patch introduces error handling for errors that occurred during connection establishment. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP implement disconnect flowsKalderon, Michal
This patch takes care of active/passive disconnect flows. Disconnect flows can be initiated remotely, in which case a async event will arrive from peer and indicated to qedr driver. These are referred to as exceptions. When a QP is destroyed, it needs to check that it's associated ep has been closed. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM add active side connectKalderon, Michal
This patch implements the active side connect. Offload a connection, process MPA reply and send RTR. In some of the common passive/active functions, the active side will work in blocking mode. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM add passive side connectKalderon, Michal
This patch implements the passive side connect. It addresses pre-allocating resources, creating a connection element upon valid SYN packet received. Calling upper layer and implementation of the accept/reject calls. Error handling is not part of this patch. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM add listener functions and initial SYN processingKalderon, Michal
This patch adds the ability to add and remove listeners and identify whether the SYN packet received is intended for iWARP or not. If a listener is not found the SYN packet is posted back to the chip. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM - setup a ll2 connection for handling SYN packetsKalderon, Michal
iWARP handles incoming SYN packets using the ll2 interface. This patch implements ll2 setup and teardown. Additional ll2 connections will be used in the future which are not part of this patch series. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Add iWARP support in ll2 connectionsKalderon, Michal
Add a new connection type for iWARP ll2 connections for setting correct ll2 filters and connection type to FW. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Rename some ll2 related definesKalderon, Michal
Make some names more generic as they will be used by iWARP too. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Implement iWARP initialization, teardown and qp operationsKalderon, Michal
This patch adds iWARP support for flows that have common code between RoCE and iWARP, such as initialization, teardown and qp setup verbs: create, destroy, modify, query. It introduces the iWARP specific files qed_iwarp.[ch] and iwarp_common.h Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Introduce iWARP personalityKalderon, Michal
iWARP personality introduced the need for differentiating in several places in the code whether we are RoCE, iWARP or either. This leads to introducing new macros for querying the personality. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03serial: exar: Add support for IOT2040 deviceJan Kiszka
This implements the setup of RS232 and the switch-over to RS485 or RS422 for the Siemens IOT2040. That uses an EXAR XR17V352 with external logic to switch between the different modes. The external logic is controlled via MPIO pins of the EXAR controller. Only pin 10 can be exported as GPIO on the IOT2040. It is connected to an LED. As the XR17V352 used on the IOT2040 is not equipped with an external EEPROM, it cannot present itself as IOT2040-variant via subvendor/ subdevice IDs. Thus, we have to check via DMI for the target platform. Co-developed with Sascha Weisenberger. Signed-off-by: Sascha Weisenberger <sascha.weisenberger@siemens.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-03gpio-exar/8250-exar: Make set of exported GPIOs configurableJan Kiszka
On the SIMATIC, IOT2040 only a single pin is exportable as GPIO, the rest is required to operate the UART. To allow modeling this case, expand the platform device data structure to specify a (consecutive) pin subset for exporting by the gpio-exar driver. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-07-03platform: Accept const propertiesJan Kiszka
Aligns us with device_add_properties, the function we call. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-07-03serial: exar: Factor out platform hooksJan Kiszka
This prepares the addition of IOT2040 platform support by preparing the needed setup and rs485_config hooks. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-03gpio-exar/8250-exar: Rearrange gpiochip parenthoodJan Kiszka
Set the parent of the exar gpiochip to its platform device, like other gpiochips are doing it. In order to keep the relationship discoverable for ACPI systems, set the platform device companion to the PCI device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio: exar: Fix iomap requestJan Kiszka
The UART driver already maps the resource for us. Trying to do this here only fails and leaves us with a non-working device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cardsJan Kiszka
Commtech adapters need the MPIOs for internal purposes, and the gpio-exar driver already refused to pick them up. But there is actually no point in even creating the underlying platform device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-02acpi/nfit: Issue Start ARS to retrieve existing recordsToshi Kani
ACPI 6.2 defines in section 9.20.7.2 that the OSPM may call a Start ARS with Flags Bit [1] set upon receiving the 0x81 notification. Upon receiving the notification, the OSPM may decide to issue a Start ARS with Flags Bit [1] set to prepare for the retrieval of existing records and issue the Query ARS Status function to retrieve the records. Add support to call a Start ARS from acpi_nfit_uc_error_notify() with ND_ARS_RETURN_PREV_DATA set when HW_ERROR_SCRUB_ON is not set. Link: http://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-01Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-07-01 Here are some more Bluetooth patches for the 4.13 kernel: - Added support for Broadcom BCM43430 controllers - Added sockaddr length checks before accessing sa_family - Fixed possible "might sleep" errors in bnep, cmtp and hidp modules - A few other minor fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sfc: correct comment on efx_mcdi_process_eventEdward Cree
Fix out-of-date comment. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sfc: change Unknown MCDI event message to print full event.Jon Cooper
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net/mlx5: fix spelling mistake: "Allodating" -> "Allocating"Colin Ian King
Trivial fix to spelling mistake in mlx5_core_dbg debug message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01Merge tag 'nfc-next-4.13-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.13 pull request This is the NFC pull requesy for 4.13. We have: - A conversion to unified device and GPIO APIs for the fdp, pn544, and st{21,-nci} drivers. - A fix for NFC device IDs allocation. - A fix for the nfcmrvl driver firmware download mechanism. - A trf7970a DT and GPIO cleanup and clock setting fix. - A few fixes for potential overflows in the digital and LLCP code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01qla2xxx: Fix NVMe entry_type for iocb packet on BE systemHimanshu Madhani
This patch fixes incorrect assignment for entry_type field for Continuation Type iocb packet on BE system. This was caught by -Woverflow warning on BE system compilation. For Continuation Type iocb driver needs to write complete 32 bit value to initialize other field members in structure to 0. Following warning is seen on BE system compile: drivers/scsi/qla2xxx/qla_nvme.c: In function 'qla2x00_start_nvme_mq': include/uapi/linux/byteorder/big_endian.h:32:26: warning: large integer implicitly truncated to unsigned type [-Woverflow] #define __cpu_to_le32(x) ((__force __le32)__swab32((x))) [mkp: fixed typo] Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-01scsi: qla2xxx: avoid unused-function warningArnd Bergmann
When NVMe support is disabled, we get a couple of harmless warnings: drivers/scsi/qla2xxx/qla_nvme.c:667:13: error: 'qla_nvme_unregister_remote_port' defined but not used [-Werror=unused-function] drivers/scsi/qla2xxx/qla_nvme.c:634:13: error: 'qla_nvme_abort_all' defined but not used [-Werror=unused-function] drivers/scsi/qla2xxx/qla_nvme.c:604:12: error: 'qla_nvme_wait_on_rport_del' defined but not used [-Werror=unused-function] This replaces the preprocessor checks in the code with equivalent compiler conditionals, which lets gcc drop the unused functions without warning, and is nicer to read. Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-01scsi: snic: fix a couple of spelling mistakes/typosColin Ian King
Trivial fix to spelling mistakes/typos: "requrest_irq" -> "request_irq" "Firmwqre" -> "Firmware" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-01scsi: qla2xxx: fix a bunch of typos and spelling mistakesColin Ian King
Fix the following typos/spelling mistakes: "attribure" -> "attribute" "suppored" -> "supported" "Symobilic" -> "Symbolic" "iteself" -> "itself" "reqeust" -> "request" "nvme_wait_on_comand" -> "nvme_wait_on_command" "bount" -> "bound" "captrue_mask" -> "capture_mask" "tempelate" -> "template" ..and also unwrap a line to fix a checkpatch warning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-12 12:41:27 +0000