summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-07-23scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"Colin Ian King
Fix spelling mistake in kernel warning message and replace printk with with pr_warn. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23net: thunderx: Use fwnode_get_mac_address()Andy Shevchenko
Replace the custom implementation with fwnode_get_mac_address, which works on both DT and ACPI platforms. While here, replace memcpy() by ether_addr_copy(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23sky2: Disable MSI on ASUS P6TTakashi Iwai
The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496 Reported-and-tested-by: Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: sja1105: sja1105_main: Add of_node_put()Nishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: mv88e6xxx: chip: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23drm/amd/display: Set enabled to false at start of audio disableNicholas Kazlauskas
[Why] In an effort to stop redundant calls to dce110_disable_audio_stream the audio->enabled flag was added to the audio resource struct. While this state probably shouldn't have been tracked on the audio struct itself it still works fine for some sequences. However, it does not work for cases where we're freeing the audio resource (such as hotplugs) or when dynamic audio is enabled. In these cases the pipe_ctx->stream_res.audio = NULL before we can set audio->enabled = false. The next time we acquire the audio resource such as on hotplug the audio will not be enabled for the stream since DC thinks it's still enabled. Audio state tracking should cover this sequence. [How] Set audio->enabled = false at the start as long as we have pipe_ctx->stream_res.audio. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-23Revert "nvme-pci: don't create a read hctx mapping without read queues"yangerkun
This reverts commit 0298d5435276e7795b0b939d74827f6e775e7009. With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0' in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps equals to 2 and nvme_pci_map_queues will not do map for poll queues. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix multipath crash when ANA is deactivatedMarta Rybczynska
Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix memory leak caused by incorrect subsystem freeLogan Gunthorpe
When freeing the subsystem after finding another match with __nvme_find_get_subsystem(), use put_device() instead of __nvme_release_subsystem() which calls kfree() directly. Per the documentation, put_device() should always be used after device_initialization() is called. Otherwise, leaks like the one below which was detected by kmemleak may occur. Once the call of __nvme_release_subsystem() is removed it no longer makes sense to keep the helper, so fold it back into nvme_release_subsystem(). unreferenced object 0xffff8883d12bfbc0 (size 16): comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s) hex dump (first 16 bytes): 6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2.... backtrace: [<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0 [<0000000081169e5f>] kvasprintf+0xad/0x130 [<0000000025626f25>] kvasprintf_const+0x47/0x120 [<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120 [<000000004881f8b3>] dev_set_name+0x98/0xc0 [<000000007124dae3>] nvme_init_identify+0x1995/0x38e0 [<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0 [<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80 [<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220 [<000000002259b3d5>] __vfs_write+0x66/0x120 [<000000002f6df81e>] vfs_write+0x154/0x490 [<000000007e8cfc19>] ksys_write+0x10a/0x240 [<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0 [<00000000fee6d692>] do_syscall_64+0xaa/0x470 [<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ab9e00cc72fa ("nvme: track subsystems") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: ignore subnqn for ADATA SX6000LNPMisha Nasledov
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a system with more than one of these SSDs will only have one usable. [ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C). [ 0.943017] nvme nvme1: Removing after probe failure status: -22 02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) 71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) There are no firmware updates available from the vendor, unfortunately. Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves the issue, and they all work after this patch: /dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...] /dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...] Signed-off-by: Misha Nasledov <misha@nasledov.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23iommu/amd: Add support for X2APIC IOMMU interruptsSuthikulpanit, Suravee
AMD IOMMU requires IntCapXT registers to be setup in order to generate its own interrupts (for Event Log, PPR Log, and GA Log) with 32-bit APIC destination ID. Without this support, AMD IOMMU MSI interrupts will not be routed correctly when booting the system in X2APIC mode. Cc: Joerg Roedel <joro@8bytes.org> Fixes: 90fcffd9cf5e ('iommu/amd: Add support for IOMMU XT mode') Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-23ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()Lorenzo Pieralisi
Static analysis identified that index comparison against ITS entries in iort_dev_find_its_id() is off by one. Update the comparison condition and clarify the resulting error message. Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling") Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/ Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-23Input: elantech - enable SMBus on new (2018+) systemsKai-Heng Feng
There are some new HP laptops with Elantech touchpad that don't support multitouch. Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported, but in addition to firmware version, the bus type also informs us whether the IC can support SMBus. To avoid breaking old ICs, we will only enable SMbus support based the bus type on systems manufactured after 2018. Lastly, let's consolidate all checks into elantech_use_host_notify() and use it to determine whether to use PS/2 or SMBus. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-23Input: applespi - fix trivial typo in struct descriptionNikolas Nyby
This fixes a typo in the keyboard_protocol description. coodinate -> coordinate. Signed-off-by: Nikolas Nyby <nikolas@gnu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-23Input: applespi - select CRC16 moduleArnd Bergmann
In some rare randconfig builds, CRC16 is disabled, which leads to a link error: drivers/input/keyboard/applespi.o: In function `applespi_send_cmd_msg': applespi.c:(.text+0x449f): undefined reference to `crc16' drivers/input/keyboard/applespi.o: In function `applespi_verify_crc': applespi.c:(.text+0x7538): undefined reference to `crc16' This symbol is meant to be selected for each user in Kconfig, so do that here as well. Fixes: 038b1a05eae6 ("Input: add Apple SPI keyboard and trackpad driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-23drbd: dynamically allocate shash descriptorArnd Bergmann
Building with clang and KASAN, we get a warning about an overly large stack frame on 32-bit architectures: drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect' [-Werror,-Wframe-larger-than=] We already allocate other data dynamically in this function, so just do the same for the shash descriptor, which makes up most of this memory. Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-23Merge tag 'vfio-ccw-20190717-2' of ↵Heiko Carstens
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes Fixes in vfio-ccw for older and newer issues.
2019-07-23s390/qdio: restrict QAOB usage to IQD unicast queuesJulian Wiedmann
The IQD mcast queue doesn't support QAOB mode, so skip the qdio_enable_async_operation() setup call for this queue. This avoids the allocation of an unneeded QAOB pointer array, and sets up q->use_cq properly so that drivers are prohibited from using QAOBs for mcast traffic. Take this opportunity to streamline the q->use_cq and aob != 0 checks. The path to qdio_siga_output() is straight-forward, we don't need to worry about being called with bad operands. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23s390/qdio: add sanity checks to the fast-requeue pathJulian Wiedmann
If the device driver were to send out a full queue's worth of SBALs, current code would end up discovering the last of those SBALs as PRIMED and erroneously skip the SIGA-w. This immediately stalls the queue. Add a check to not attempt fast-requeue in this case. While at it also make sure that the state of the previous SBAL was successfully extracted before inspecting it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23firmware: Fix missing inlineTakashi Iwai
I mistakenly dropped the inline while resolving the patch conflicts in the previous fix patch. Without inline, we get compiler warnings wrt unused functions. Note that Mauro's original patch contained the correct changes; it's all my fault to submit a patch before a morning coffee. Fixes: c8917b8ff09e ("firmware: fix build errors in paged buffer handling code") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190723081159.22624-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-23cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()Wen Yang
The cpu variable is still being used in the of_get_property() call after the of_node_put() call, which may result in use-after-free. Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-23int340X/processor_thermal_device: Fix proc_thermal_rapl_remove()Rafael J. Wysocki
Passing 0 to cpuhp_remove_state() triggers the BUG_ON() in __cpuhp_remove_state_cpuslocked() and the argument passed to powercap_unregister_control_type() is expected to be a valid pointer, so avoid calling these functions with incorrect arguments from proc_thermal_rapl_remove(). Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com>
2019-07-22Revert "net: hns: fix LED configuration for marvell phy"David S. Miller
This reverts commit f4e5f775db5a4631300dccd0de5eafb50a77c131. Andrew Lunn says this should be handled another way. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22scsi: core: fix the dma_max_mapping_size callChristoph Hellwig
We should only call dma_max_mapping_size for devices that have a DMA mask set, otherwise we can run into a NULL pointer dereference that will crash the system. Also we need to do right shift to get the sectors from the size in bytes, not a left shift. Fixes: bdd17bdef7d8 ("scsi: core: take the DMA max mapping size into account") Reported-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-22scsi: fdomain: fix building pcmcia front-endArnd Bergmann
We get a warning when CONFIG_SCSI_LOWLEVEL is disabled here: WARNING: unmet direct dependencies detected for SCSI_FDOMAIN Depends on [n]: SCSI_LOWLEVEL [=n] && SCSI [=y] Selected by [m]: - PCMCIA_FDOMAIN [=m] && SCSI_LOWLEVEL_PCMCIA [=y] && SCSI [=y] && PCMCIA [=y] && m && MODULES [=y] Move all of SCSI_LOWLEVEL_PCMCIA inside of the existing SCSI_LOWLEVEL section. Very few people use the PCMCIA support these days, and they likely don't mind having to turn on SCSI_LOWLEVEL as well. This way we avoid the link error and get a more sensible structure. Fixes: 7d47fa065e62 ("scsi: fdomain: Add PCMCIA support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-22net: stmmac: Do not cut down 1G modesJose Abreu
Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC. Let's allow this speed by default. Reported-by: Ondrej Jirman <megi@xff.cz> Tested-by: Ondrej Jirman <megi@xff.cz> Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: Use kcalloc() instead of kmalloc_array()Jose Abreu
We need the memory to be zeroed upon allocation so use kcalloc() instead. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: RX Descriptors need to be clean before setting buffersJose Abreu
RX Descriptors are being cleaned after setting the buffers which may lead to buffer addresses being wiped out. Fix this by clearing earlier the RX Descriptors. Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: hns: fix LED configuration for marvell phyYonglong Liu
Since commit(net: phy: marvell: change default m88e1510 LED configuration), the active LED of Hip07 devices is always off, because Hip07 just use 2 LEDs. This patch adds a phy_register_fixup_for_uid() for m88e1510 to correct the LED configuration. Fixes: 077772468ec1 ("net: phy: marvell: change default m88e1510 LED configuration") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: linyunsheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: mvpp2: Don't check for 3 consecutive Idle frames for 10G linksMaxime Chevallier
PPv2's XLGMAC can wait for 3 idle frames before triggering a link up event. This can cause the link to be stuck low when there's traffic on the interface, so disable this feature. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22clk: renesas: cpg-mssr: Fix reset control race conditionGeert Uytterhoeven
The module reset code in the Renesas CPG/MSSR driver uses read-modify-write (RMW) operations to write to a Software Reset Register (SRCRn), and simple writes to write to a Software Reset Clearing Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware User's Manuals. However, this may cause a race condition when two devices are reset in parallel: if the reset for device A completes in the middle of the RMW operation for device B, device A may be reset again, causing subtle failures (e.g. i2c timeouts): thread A thread B -------- -------- val = SRCRn val |= bit A SRCRn = val delay val = SRCRn (bit A is set) SRSTCLRn = bit A (bit A in SRCRn is cleared) val |= bit B SRCRn = val (bit A and B are set) This can be reproduced on e.g. Salvator-XS using: $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done & $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done & i2c-rcar e6510000.i2c: error -110 : 40000002 i2c-rcar e66d8000.i2c: error -110 : 40000002 According to the R-Car Gen3 Hardware Manual Errata for Rev. 0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware User's Manual, writes to SRCRn do not require read-modify-write cycles. Note that the R-Car Gen2 Hardware User's Manual has not been updated yet, and still says a read-modify-write sequence is required. According to the hardware team, the reset hardware block is the same on both R-Car Gen2 and Gen3, though. Hence fix the issue by replacing the read-modify-write operations on SRCRn by simple writes. Reported-by: Yao Lihua <Lihua.Yao@desay-svautomotive.com> Fixes: 6197aa65c4905532 ("clk: renesas: cpg-mssr: Add support for reset control") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Linh Phung <linh.phung.jy@renesas.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-22clk: sprd: Select REGMAP_MMIO to avoid compile errorsChunyan Zhang
Make REGMAP_MMIO selected to avoid undefined reference to regmap symbols. Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-22clk: mediatek: mt8183: Register 13MHz clock earlier for clocksourceWeiyi Lu
The 13MHz clock should be registered before clocksource driver is initialized. Use CLK_OF_DECLARE_DRIVER() to guarantee. Fixes: acddfc2c261b ("clk: mediatek: Add MT8183 clock support") Cc: <stable@vger.kernel.org> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-22clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1Codrin Ciubotariu
In clk_generated_determine_rate(), if the divisor is greater than GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned. If clk_generated_set_rate() will be called later with this wrong rate, it will return -EINVAL, so the generated clock won't change its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1. Fixes: 8c7aa6328947 ("clk: at91: clk-generated: remove useless divisor loop") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-22scsi: target: cxgbit: add support for IEEE_8021QAZ_APP_SEL_STREAM selectorVarun Prakash
IEEE_8021QAZ_APP_SEL_STREAM is a valid selector for iSCSI connections, so add code to use IEEE_8021QAZ_APP_SEL_STREAM selector to get priority mask. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-22drm/amdgpu/smu: move fan rpm query into the asic specific codeAlex Deucher
On vega20, there is an SMU message to query it. On navi, it's fetched from the metrics table. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm/amd/powerplay: custom peak clock freq for navi10Kevin Wang
v2: add function smu_default_set_performance_level as default dpm level handler. change function name smu_set_performance_level to smu_asic_set_performance_level v1: 1.NAVI10_PEAK_SCLK_XTX 1830 Mhz 2.NAVI10_PEAK_SCLK_XT 1755 Mhz 3.NAVI10_PEAK_SCLK_XL 1625 Mhz Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm: silence variable 'conn' set but not usedQian Cai
The "struct drm_connector" iteration cursor from "for_each_new_connector_in_state" is never used in atomic_remove_fb() which generates a compilation warning, drivers/gpu/drm/drm_framebuffer.c: In function 'atomic_remove_fb': drivers/gpu/drm/drm_framebuffer.c:838:24: warning: variable 'conn' set but not used [-Wunused-but-set-variable] Silence it by marking "conn" __maybe_unused. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1563822886-13570-1-git-send-email-cai@lca.pw
2019-07-22Merge branch 'pdf_fixes_v1' of https://git.linuxtv.org/mchehab/experimental ↵Jonathan Corbet
into mauro Bring in a set of post-thrashup fixes from Mauro.
2019-07-22bonding: Force slave speed check after link state recovery for 802.3adThomas Falcon
The following scenario was encountered during testing of logical partition mobility on pseries partitions with bonded ibmvnic adapters in LACP mode. 1. Driver receives a signal that the device has been swapped, and it needs to reset to initialize the new device. 2. Driver reports loss of carrier and begins initialization. 3. Bonding driver receives NETDEV_CHANGE notifier and checks the slave's current speed and duplex settings. Because these are unknown at the time, the bond sets its link state to BOND_LINK_FAIL and handles the speed update, clearing AD_PORT_LACP_ENABLE. 4. Driver finishes recovery and reports that the carrier is on. 5. Bond receives a new notification and checks the speed again. The speeds are valid but miimon has not altered the link state yet. AD_PORT_LACP_ENABLE remains off. Because the slave's link state is still BOND_LINK_FAIL, no further port checks are made when it recovers. Though the slave devices are operational and have valid speed and duplex settings, the bond will not send LACPDU's. The simplest fix I can see is to force another speed check in bond_miimon_commit. This way the bond will update AD_PORT_LACP_ENABLE if needed when transitioning from BOND_LINK_FAIL to BOND_LINK_UP. CC: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22drm/msm: stop abusing dma_map/unmap for cacheRob Clark
Recently splats like this started showing up: WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0 Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G W 5.2.0-rc5-next-20190619+ #2317 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018 Workqueue: msm msm_gem_free_work [msm] pstate: 80c00005 (Nzcv daif +PAN +UAO) pc : __iommu_dma_unmap+0xb8/0xc0 lr : __iommu_dma_unmap+0x54/0xc0 sp : ffff0000119abce0 x29: ffff0000119abce0 x28: 0000000000000000 x27: ffff8001f9946648 x26: ffff8001ec271068 x25: 0000000000000000 x24: ffff8001ea3580a8 x23: ffff8001f95ba010 x22: ffff80018e83ba88 x21: ffff8001e548f000 x20: fffffffffffff000 x19: 0000000000001000 x18: 00000000c00001fe x17: 0000000000000000 x16: 0000000000000000 x15: ffff000015b70068 x14: 0000000000000005 x13: 0003142cc1be1768 x12: 0000000000000001 x11: ffff8001f6de9100 x10: 0000000000000009 x9 : ffff000015b78000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : fffffffffffff000 x5 : 0000000000000fff x4 : ffff00001065dbc8 x3 : 000000000000000d x2 : 0000000000001000 x1 : fffffffffffff000 x0 : 0000000000000000 Call trace: __iommu_dma_unmap+0xb8/0xc0 iommu_dma_unmap_sg+0x98/0xb8 put_pages+0x5c/0xf0 [msm] msm_gem_free_work+0x10c/0x150 [msm] process_one_work+0x1e0/0x330 worker_thread+0x40/0x438 kthread+0x12c/0x130 ret_from_fork+0x10/0x18 ---[ end trace afc0dc5ab81a06bf ]--- Not quite sure what triggered that, but we really shouldn't be abusing dma_{map,unmap}_sg() for cache maint. Cc: Stephen Boyd <sboyd@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190630124735.27786-1-robdclark@gmail.com
2019-07-22RDMA/siw: Remove set but not used variables 'rv'Mao Wenan
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/sw/siw/siw_cm.c: In function siw_cep_set_inuse: drivers/infiniband/sw/siw/siw_cm.c:223:6: warning: variable rv set but not used [-Wunused-but-set-variable] Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Link: https://lore.kernel.org/r/20190719012938.100628-1-maowenan@huawei.com Signed-off-by: Mao Wenan <maowenan@huawei.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/mlx5: Replace kfree with kvfreeChuhong Yuan
Memory allocated by kvzalloc should not be freed by kfree(), use kvfree() instead. Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support") Link: https://lore.kernel.org/r/20190717082101.14196-1-hslester96@gmail.com Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22RDMA/bnxt_re: Honor vlan_id in GID entry comparisonSelvin Xavier
A GID entry consists of GID, vlan, netdev and smac. Extend GID duplicate check comparisons to consider vlan_id as well to support IPv6 VLAN based link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to hold gid and vlan_id information. The issue is discussed in the following thread https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com Fixes: 823b23da7113 ("IB/core: Allow vlan link local address based RoCE GIDs") Cc: <stable@vger.kernel.org> # v5.2+ Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.com Reported-by: Yi Zhang <yi.zhang@redhat.com> Co-developed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Drop all TID RDMA READ RESP packets after r_next_psnKaike Wan
When a TID sequence error occurs while receiving TID RDMA READ RESP packets, all packets after flow->flow_state.r_next_psn should be dropped, including those response packets for subsequent segments. The current implementation will drop the subsequent response packets for the segment to complete next, but may accept packets for subsequent segments and therefore mistakenly advance the r_next_psn fields for the corresponding software flows. This may result in failures to complete subsequent segments after the current segment is completed. The fix is to only use the flow pointed by req->clear_tail for checking KDETH PSN instead of finding a flow from the request's flow array. Fixes: b885d5be9ca1 ("IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715164540.74174.54702.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Field not zero-ed when allocating TID flow memoryKaike Wan
The field flow->resync_npkts is added for TID RDMA WRITE request and zero-ed when a TID RDMA WRITE RESP packet is received by the requester. This field is used to rewind a request during retry in the function hfi1_tid_rdma_restart_req() shared by both TID RDMA WRITE and TID RDMA READ requests. Therefore, when a TID RDMA READ request is retried, this field may not be initialized at all, which causes the retry to start at an incorrect psn, leading to the drop of the retry request by the responder. This patch fixes the problem by zeroing out the field when the flow memory is allocated. Fixes: 838b6fd2d9ca ("IB/hfi1: TID RDMA RcvArray programming and TID allocation") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715164534.74174.6177.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Unreserve a flushed OPFN requestKaike Wan
When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [<ffffffffbbb61e41>] dump_stack+0x19/0x1b [<ffffffffbb497688>] __warn+0xd8/0x100 [<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt] [<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0 [<ffffffffbb61d645>] ? __kmalloc+0x55/0x230 [<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs] [<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0 [<ffffffffbb641650>] vfs_write+0xc0/0x1f0 [<ffffffffbb64246f>] SyS_write+0x7f/0xf0 [<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Check for error on call to alloc_rsm_map_tableJohn Fleck
The call to alloc_rsm_map_table does not check if the kmalloc fails. Check for a NULL on alloc, and bail if it fails. Fixes: 372cc85a13c9 ("IB/hfi1: Extract RSM map table init from QOS") Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: John Fleck <john.fleck@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22drm/msm/dpu: Correct dpu encoder spinlock initializationShubhashree Dhar
dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of modeset init. Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org> [seanpaul resolved conflict in old init removal and revised the commit message] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1561357632-15361-1-git-send-email-dhar@codeaurora.org
2019-07-22RDMA/hns: Fix sg offset non-zero issueXi Wang
When run perftest in many times, the system will report a BUG as follows: BUG: Bad rss-counter state mm:(____ptrval____) idx:0 val:-1 BUG: Bad rss-counter state mm:(____ptrval____) idx:1 val:1 We tested with different kernel version and found it started from the the following commit: commit d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") In this commit, the sg->offset is always 0 when sg_set_page() is called in ib_umem_get() and the drivers are not allowed to change the sgl, otherwise it will get bad page descriptor when unfolding SGEs in __ib_umem_release() as sg_page_count() will get wrong result while sgl->offset is not 0. However, there is a weird sgl usage in the current hns driver, the driver modified sg->offset after calling ib_umem_get(), which caused we iterate past the wrong number of pages in for_each_sg_page iterator. This patch fixes it by correcting the non-standard sgl usage found in the hns_roce_db_map_user() function. Fixes: d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Link: https://lore.kernel.org/r/1562808737-45723-1-git-send-email-oulijun@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-19 16:50:11 +0000