summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-02-07PM / OPP: Make _find_opp_table_unlocked() staticWei Yongjun
Fixes the following sparse warning: drivers/base/power/opp/core.c:49:18: warning: symbol '_find_opp_table_unlocked' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplugVitaly Kuznetsov
We may or may not have all possible CPUs in MADT on boot but in any case we're overwriting x86_cpu_to_acpiid mapping with U32_MAX when acpi_register_lapic() is called again on the CPU hotplug path: acpi_processor_hotadd_init() -> acpi_map_cpu() -> acpi_register_lapic() As we have the required acpi_id information in acpi_processor_hotadd_init() propagate it to acpi_map_cpu() to always keep x86_cpu_to_acpiid mapping valid. Reported-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07spi: acpi: Initialize modalias from of_compatibleDan O'Donovan
When using devicetree spi_device.modalias is set to the compatible string with the vendor prefix removed. For SPI devices described via ACPI the spi_device.modalias string is initialized by acpi_device_hid. When using ACPI and DT ids this string ends up something like "PRP0001". Change acpi_register_spi_device to use the of_compatible property if present. This makes it easier to instantiate spi drivers through ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07i2c: acpi: Initialize info.type from of_compatibleDan O'Donovan
When using devicetree i2c_board_info.type is set to the compatible string with the vendor prefix removed. For I2C devices described via ACPI the i2c_board_info.type string is set to the ACPI device name. When using ACPI and DT ids this string ends up something like "PRP0001:00". If the of_compatible property is present try to use that instead. This makes it easier to instantiate i2c drivers through ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()Dan O'Donovan
When using devicetree stuff like i2c_client.name or spi_device.modalias is initialized to the first DT compatible id with the vendor prefix stripped. Since some drivers rely on this try to replicate it when using ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: export code duplicating array of property entriesDmitry Torokhov
When augmenting ACPI-enumerated devices with additional property data based on DMI info, a module has often several potential property sets, with only one being active on a given box. In order to save memory it should be possible to mark everything and __initdata or __initconst, execute DMI match early, and duplicate relevant properties. Then kernel will discard the rest of them. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: constify property arrays valuesDmitry Torokhov
Data that is fed into property arrays should not be modified, so let's mark relevant pointers as const. This will allow us making source arrays as const/__initconst. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: allow to constify propertiesDmitry Torokhov
There is no reason why statically defined properties should be modifiable, so let's make device_add_properties() and the rest of pset_*() functions to take const pointers to properties. This will allow us to mark properties as const/__initconst at definition sites. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07[media] cx231xx: Fix I2C on Internal Master 3 BusOleh Kravchenko
Internal Master 3 Bus can send and receive only 4 bytes per time. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-07[media] cx231xx: Initial support Evromedia USB Full Hybrid Full HDOleh Kravchenko
This patch provide only digital support. The device is based on Si2168 30-demodulator, Si2158-20 tuner and CX23102-11Z chipset; USB id: 1b80:d3b2. Status: - DVB-T2 works fine; - Composite and SVideo works fine; - Analog not implemented. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-07efi/libstub: Make file I/O chunking x86-specificArd Biesheuvel
The ARM decompressor is finicky when it comes to uninitialized variables with local linkage, the reason being that it may relocate .text and .bss independently when executing from ROM. This is only possible if all references into .bss from .text are absolute, and this happens to be the case for references emitted under -fpic to symbols with external linkage, and so all .bss references must involve symbols with external linkage. When building the ARM stub using clang, the initialized local variable __chunk_size is optimized into a zero-initialized flag that indicates whether chunking is in effect or not. This flag is therefore emitted into .bss, which triggers the ARM decompressor's diagnostics, resulting in a failed build. Under UEFI, we never execute the decompressor from ROM, so the diagnostic makes little sense here. But we can easily work around the issue by making __chunk_size global instead. However, given that the file I/O chunking that is controlled by the __chunk_size variable is intended to work around known bugs on various x86 implementations of UEFI, we can simply make the chunking an x86 specific feature. This is an improvement by itself, and also removes the need to parse the efi= options in the stub entirely. Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-8-git-send-email-ard.biesheuvel@linaro.org [ Small readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi: Disable secure boot if shim is in insecure modeJosh Boyer
A user can manually tell the shim boot loader to disable validation of images it loads. When a user does this, it creates a UEFI variable called MokSBState that does not have the runtime attribute set. Given that the user explicitly disabled validation, we can honor that and not enable secure boot mode if that variable is set. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-6-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi: Get and store the secure boot statusDavid Howells
Get the firmware's secure-boot status in the kernel boot wrapper and stash it somewhere that the main kernel image can find. The efi_get_secureboot() function is extracted from the ARM stub and (a) generalised so that it can be called from x86 and (b) made to use efi_call_runtime() so that it can be run in mixed-mode. For x86, it is stored in boot_params and can be overridden by the boot loader or kexec. This allows secure-boot mode to be passed on to a new kernel. Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-5-git-send-email-ard.biesheuvel@linaro.org [ Small readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07ath9k: fix race condition in enabling/disabling IRQsFelix Fietkau
The code currently relies on refcounting to disable IRQs from within the IRQ handler and re-enabling them again after the tasklet has run. However, due to race conditions sometimes the IRQ handler might be called twice, or the tasklet may not run at all (if interrupted in the middle of a reset). This can cause nasty imbalances in the irq-disable refcount which will get the driver permanently stuck until the entire radio has been stopped and started again (ath_reset will not recover from this). Instead of using this fragile logic, change the code to ensure that running the irq handler during tasklet processing is safe, and leave the refcount untouched. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath9k_hw: check if the chip failed to wake upFelix Fietkau
In an RFC patch, Sven Eckelmann and Simon Wunderlich reported: "QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a state in which a read of AR_CFG always returns 0xdeadbeef. This should not happen when when the power_mode of the device is ATH9K_PM_AWAKE." Include the check for the default register state in the existing MAC hang check. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath9k: rename tx_complete_work to hw_check_workFelix Fietkau
Also include common MAC alive check. This should make the hang checks more reliable for modes where beacons are not sent and is used as a starting point for further hang check improvements Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07wcn36xx: Implement cancel_hw_scanBjorn Andersson
In the even that the wcn36xx interface is brought down while a hw_scan is active we must abort and wait for the ongoing scan to signal completion to mac80211. Reported-by: Mart Raudsepp <leio@gentoo.org> Fixes: 886039036c20 ("wcn36xx: Implement firmware assisted scan") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: fix reading sram contents for QCA4019Ashok Raj Nagarajan
With QCA4019 platform, SRAM address can be accessed directly from host but currently, we are assuming sram addresses cannot be accessed directly and hence we convert the addresses. While there, clean up growing hw checks during conversion of target CPU address to CE address. Now we have function pointer pertaining to different chips. Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: fix boot failure in UTF mode/testmodeTamizh chelvam
Rx filter reset and the dynamic tx switch mode (EXT_RESOURCE_CFG) configuration are causing the following errors when UTF firmware is loaded to the target. Error message 1: [ 598.015629] ath10k_pci 0001:01:00.0: failed to ping firmware: -110 [ 598.020828] ath10k_pci 0001:01:00.0: failed to reset rx filter: -110 [ 598.141556] ath10k_pci 0001:01:00.0: failed to start core (testmode): -110 Error message 2: [ 668.615839] ath10k_ahb a000000.wifi: failed to send ext resource cfg command : -95 [ 668.618902] ath10k_ahb a000000.wifi: failed to start core (testmode): -95 Avoiding these configurations while bringing the target in testmode is solving the problem. Cc: stable@vger.kernel.org Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: add debugfs support to get per peer tids log via tracingMaharaja Kennadyrajan
This patch provides support to get per peer tids log. echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/ XX:XX/peer_debug_trigger These logs will be the part of FWLOGS which we collect the logs via tracing interface. Here we will get the peer tigd logs only once(not repeatedly) when we write 1 to the debugfs file. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: few whitespace fixesKalle Valo
Fixes checkpatch warnings: drivers/net/wireless/ath/ath10k/pci.c:1593: Statements should start on a tabstop drivers/net/wireless/ath/ath10k/ce.c:962: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: use names in function definition argumentsKalle Valo
Fixes new checkpatch warnings: drivers/net/wireless/ath/ath10k/htt.h:1823: function definition argument 'struct sk_buff *' should also have an identifier name drivers/net/wireless/ath/ath10k/wmi.h:6607: function definition argument 'struct wmi_start_scan_arg *' should also have an identifier name Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: prefer unsigned int over just unsignedKalle Valo
Fixes new checkpatch warnings: drivers/net/wireless/ath/ath10k/htt.h:1639: Prefer 'unsigned int' to bare use of 'unsigned' drivers/net/wireless/ath/ath10k/htt.h:1660: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07rtlwifi: rtl8192c-common: Fix "BUG: KASAN:Larry Finger
Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> # 4.0+ Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Convert halbtcoutsrc.c to use standard debuggingLarry Finger
The routines in btcoexist use different debugging routines than are used in the other drivers. This patch converts halbtcoutsrc.c to use the standard routines. It also deletes the definitions of the now-unused debugging macros, and turns on compilation of all the routines in btcoexist. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Convert halbtc8821a2ant.c to use standard debuggingLarry Finger
The routines in btcoexist use different debugging routines than are used in the other drivers. This patch converts halbtc8821a2ant.c to use the standard routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Convert halbtc8821a1ant.c to use standard debuggingLarry Finger
The routines in btcoexist use different debugging routines than are used in the other drivers. This patch converts halbtc8821a1ant.c to use the standard routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Convert halbtc8723b2ant.c to use standard debuggingLarry Finger
The routines in btcoexist use different debugging routines than are used in the other drivers. This patch converts halbtc8723b2ant.c to use the standard routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Convert halbtc8723b1ant.c to use standard debuggingLarry Finger
The routines in btcoexist use different debugging routines than are used in the other drivers. This patch converts halbtc8723b1ant.c to use the standard routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Convert halbtc8192e2ant.c to use standard debuggingLarry Finger
The routines in btcoexist use different debugging routines than are used in the other drivers. This patch converts halbtc8192e2ant.c to use the standard routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: rtl8821ae: Fix typo in symbol for bandwidth numbersLarry Finger
In several places, "BANDWITH" is used when "BANDWIDTH" should have been used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07mwifiex: Avoid skipping WEP key deletion for APGanapathi Bhat
This patch fixes the issue specific to AP. AP is started with WEP security and external station is connected to it. Data path works in this case. Now if AP is restarted with WPA/WPA2 security, station is able to connect but ping fails. Driver skips the deletion of WEP keys if interface type is AP. Removing that redundant check resolves the issue. Fixes: e57f1734d87a ("mwifiex: add key material v2 support") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rt2x00: avoid introducing a USB dependency in the rt2x00lib moduleStanislaw Gruszka
As reported by Felix: Though protected by an ifdef, introducing an usb symbol dependency in the rt2x00lib module is a major inconvenience for distributions that package kernel modules split into individual packages. Get rid of this unnecessary dependency by calling the usb related function from a more suitable place. Cc: Vishal Thanki <vishalthanki@gmail.com> Reported-by: Felix Fietkau <nbd@nbd.name> Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07brcmfmac: use wiphy_read_of_freq_limits to respect limits from DTRafał Miłecki
This new helper reads extra frequency limits specified in DT and disables unavailable chanels. This is useful for devices (like home routers) with chipsets limited e.g. by board design. In order to respect info read from DT we simply need to check for IEEE80211_CHAN_DISABLED bit when constructing channel info. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07mwifiex: don't include mac80211.hJohannes Berg
This driver doesn't use mac80211, so it shouldn't include mac80211.h, include only the necessary cfg80211.h instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07Merge tag 'v4.10-rc7' into efi/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07Merge tag 'iwlwifi-next-for-kalle-2017-02-06' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second batch of improvements and fixes for v4.11. * A bunch of bugfixes for the DQA code; * Work on support for new A000 devices continues; * Some clean-ups and general improvements
2017-02-07rtlwifi: Add work queue for c2h cmd.Ping-Ke Shih
btcoex needs to sleep, thus it must run in thread context. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: rtl8723be: fix ant_sel codePing-Ke Shih
When ant_sel is set, we need to fill single_ant_path to select correct antenna path. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoex: move bt_type declarationPing-Ke Shih
Routine rtl_get_hwpg_bt_type() is better in halbtcoutsrc.c than in rtl_btc.c. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: rtl8723be: btcoex: add package_type function to btcoexPing-Ke Shih
The new code handles the package-type of the chip. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: move btcoex's ant_num declarationPing-Ke Shih
File halbtcoutsrc.c is a better place for routine rtl_get_hwpg_ant_num() than file rtl_btc.c. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: rtl8723be: btcoexist: Add single_ant_pathPing-Ke Shih
Some devices with RTL8732BE wifi/Bluetooth adapters are shipped with only a single antenna. On a subset of these, the EEPROM is incorectly coded to indicate the wrong connection. The resulting problems have been fixed for wifi. This change handles them for BT. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Change logging in halbtc8192e2ant.cLarry Finger
This routine uses its own debugging macros These are changed to use the the recently rewritten RT_TRACE macro. There are also some renamed variables that were missed in the previous step. The only functional change is that some debugging statements have been dropped based on the final code supplied by Realtek. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Add vendor definition for new btcoexistPing-Ke Shih
Routine halbtc_get() will need to be able to get the vendor ID. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: Add a new enumeration value to btc_set_typePing-Ke Shih
The new value is needed for future capability. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: Set retry limit depends on vif type.Ping-Ke Shih
We assign different retry limit according to vif type, because it can boost performance in field. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: shaofu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: Fix programing CAM content sequence.Ping-Ke Shih
There is a potential race condition when the control byte of a CAM entry is written first. Write in reverse order to correct the condition. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: shaofu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07m68k/mac: Replace via-maciisi driver with via-cuda driverFinn Thain
Change the device probe test in the via-cuda.c driver so it will load on Egret-based machines too. Remove the now redundant via-maciisi.c driver. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Add support for Egret system controllerFinn Thain
The Egret system controller was the predecessor to the Cuda and the differences are minor. On Cuda, byte acknowledgement requires one transition of the TACK signal; on Egret two are needed. On Cuda, TIP is active low; on Egret it is active high. And Cuda raises certain interrupts that Egret omits. Accomodating these differences complicates the Cuda driver slightly but avoids a lot of duplication (see next patch). Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-20 03:05:55 +0000