summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-01-18Merge tag 'omap-for-v4.10/fixes-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.10-rc cycle. Mostly a DMA regression fix for omap1, and then a handful of trivial fixes for boards and devices to work: - Fixes TI wilink bluetooth strange platform data baud rate - Remove duplicate pinmux line for am335x-icev2 - Fix omap1 dma regression - Fix uninitialized return value for wkup_m3_ipc_probe() - Fix Ethernet PHY binding typo for dra72-evm - Fix init for omap5 and dra7 sata ports - Fix mmc card detect pin for Logic PD SOM-LV * tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available. ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe() ARM: OMAP1: DMA: Correct the number of logical channels ARM: dts: am335x-icev2: Remove the duplicated pinmux setting ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-19pinctrl/amd: Drop pinctrl_unregister for devm_ registered deviceWei Yongjun
It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. Fixes: 3bfd44306c65 ("pinctrl: amd: Add support for additional GPIO") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18net: Remove usage of net_device last_rx memberTobias Klauser
The network stack no longer uses the last_rx member of struct net_device since the bonding driver switched to use its own private last_rx in commit 9f242738376d ("bonding: use last_arp_rx in slave_last_rx()"). However, some drivers still (ab)use the field for their own purposes and some driver just update it without actually using it. Previously, there was an accompanying comment for the last_rx member added in commit 4dc89133f49b ("net: add a comment on netdev->last_rx") which asked drivers not to update is, unless really needed. However, this commend was removed in commit f8ff080dacec ("bonding: remove useless updating of slave->dev->last_rx"), so some drivers added later on still did update last_rx. Remove all usage of last_rx and switch three drivers (sky2, atp and smc91c92_cs) which actually read and write it to use their own private copy in netdev_priv. Compile-tested with allyesconfig and allmodconfig on x86 and arm. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18bnxt_en: Fix "uninitialized variable" bug in TPA code path.Michael Chan
In the TPA GRO code path, initialize the tcp_opt_len variable to 0 so that it will be correct for packets without TCP timestamps. The bug caused the SKB fields to be incorrectly set up for packets without TCP timestamps, leading to these packets being rejected by the stack. Reported-by: Andy Gospodarek <andrew.gospodarek@broadocm.com> Acked-by: Andy Gospodarek <andrew.gospodarek@broadocm.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net: phy: bcm63xx: Utilize correct config_intr functionDaniel Gonzalez Cabanelas
Commit a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") make the BCM63xx PHY driver utilize bcm_phy_config_intr() which would appear to do the right thing, except that it does not write to the MII_BCM63XX_IR register but to MII_BCM54XX_ECR which is different. This would be causing invalid link parameters and events from being generated by the PHY interrupt. Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net: ethernet: ti: davinci_cpdma: correct check on NULL in set rateIvan Khoronzhuk
Check "ch" on NULL first, then get ctlr. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18tun: rx batchingJason Wang
We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18vhost_net: tx batchingJason Wang
This patch tries to utilize tuntap rx batching by peeking the tx virtqueue during transmission, if there's more available buffers in the virtqueue, set MSG_MORE flag for a hint for backend (e.g tuntap) to batch the packets. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18vhost: better detection of available buffersJason Wang
This patch tries to do several tweaks on vhost_vq_avail_empty() for a better performance: - check cached avail index first which could avoid userspace memory access. - using unlikely() for the failure of userspace access - check vq->last_avail_idx instead of cached avail index as the last step. This patch is need for batching supports which needs to peek whether or not there's still available buffers in the ring. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net:add one common config ARCH_WANT_RELAX_ORDER to support relax orderingMao Wenan
Relax ordering(RO) is one feature of 82599 NIC, to enable this feature can enhance the performance for some cpu architecure, such as SPARC and so on. Currently it only supports one special cpu architecture(SPARC) in 82599 driver to enable RO feature, this is not very common for other cpu architecture which really needs RO feature. This patch add one common config CONFIG_ARCH_WANT_RELAX_ORDER to set RO feature, and should define CONFIG_ARCH_WANT_RELAX_ORDER in sparc Kconfig firstly. Signed-off-by: Mao Wenan <maowenan@huawei.com> Reviewed-by: Alexander Duyck <alexander.duyck@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18xen-netback: protect resource cleaning on XenBus disconnectIgor Druzhinin
vif->lock is used to protect statistics gathering agents from using the queue structure during cleaning. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18xen-netback: fix memory leaks on XenBus disconnectIgor Druzhinin
Eliminate memory leaks introduced several years ago by cleaning the queue resources which are allocated on XenBus connection event. Namely, queue structure array and pages used for IO rings. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net/mlx5e: Remove unnecessary checks when setting num channelsEran Ben Elisha
Boundaries checks for the number of RX and TX should be checked by the caller and not in the driver. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net/mlx4_en: Remove unnecessary checks when setting num channelsEran Ben Elisha
Boundaries checks for the number of RX, TX, other and combined channels should be checked by the caller and not in the driver. In addition, remove wrong memset on get channels as it overrides the cmd field in the requester struct. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf"Tejun Heo
This reverts commit a234f7395c9301a5048cb2daa4c86f15c6f02de8. The commit tried to get rid of the shared global SCSI response buffer. Unfortunately, it added blocking allocation to atomic path. Revert it for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@lst.de>
2017-01-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a crash in the ARM-Exynos clocksource driver, triggered by CPU hotplug operations" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/exynos_mct: Clear interrupt when cpu is shut down
2017-01-18stmicro: add more information to Kconfigjpinto
This patch adds more info to stmicro' Kconfig files in order to be clearer that the driver can be used by ethernet cards based on 10/100/1000/EQOS Synopsys IP Cores. EQOS was also added stmmac/Kconfig Kconfig, since dwmac4 is in fact EQoS, one of Synopsys Ethernet IPs. More info at: https://www.synopsys.com/dw/ipdir.php?ds=dwc_ether_qos Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18regulator: twl6030: fix range comparison, allowing vsel = 59Colin Ian King
The range min_uV > 1350000 && min_uV <= 150000 is never reachable because of a typo in the previous range check and hence vsel = 59 is never reached. Fix the previous range check to enable the vsel = 59 setting. Fixes CoverityScan CID#728454 ("Logially dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-18net/mlx5e: Support bpf_xdp_adjust_head()Martin KaFai Lau
This patch adds bpf_xdp_adjust_head() support to mlx5e. 1. rx_headroom is added to struct mlx5e_rq. It uses an existing 4 byte hole in the struct. 2. The adjusted data length is checked against MLX5E_XDP_MIN_INLINE and MLX5E_SW2HW_MTU(rq->netdev->mtu). 3. The macro MLX5E_SW2HW_MTU is moved from en_main.c to en.h. MLX5E_HW2SW_MTU is also moved to en.h for symmetric reason but it is not a must. v2: - Keep the xdp specific logic in mlx5e_xdp_handle() - Update dma_len after the sanity checks in mlx5e_xmit_xdp_frame() Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18power: supply: qcom_smbb: add regulator dependencyArnd Bergmann
The added regulator dependency in the smbb driver causes build errors when regulators are disabled, e.g. in randconfig build testing: drivers/power/supply/qcom_smbb.o: In function `smbb_chg_otg_is_enabled': qcom_smbb.c:(.text.smbb_chg_otg_is_enabled+0x18): undefined reference to `rdev_get_drvdata' drivers/power/supply/qcom_smbb.o: In function `smbb_charger_probe': qcom_smbb.c:(.text.smbb_charger_probe+0x410): undefined reference to `devm_regulator_register' This adds a Kconfig dependency to avoid the link error. Fixes: 61274eff0dde ("power: supply: qcom_smbb: Add otg regulator for control of vbus") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-18power: reset: at91-reset: remove leftover platform_device_idAlexandre Belloni
commit eacd8d09db7f ("power/reset: at91-reset: remove useless at91_reset_platform_probe()") removed non DT probe support but forgot to remove the now useless id_table. Do that now. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-18power: reset: at91-reset: add samx7 supportSzemző András
Add samx7 support. It is lacking a few bits and needs a new reset function. Signed-off-by: Szemző András <sza@esh.hu> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-18drm/i915: Ignore bogus plane coordinates on SKL when the plane is not visibleVille Syrjälä
When the plane is invisible we may have all sorts of bogus stuff in the coordinates, which we must ignore or else we might fail the plane update. This started to happen on SKL when I moved the plane offset computation to happen in the check phase. Previously we happily ignored it all since we never called the update_plane hook with an invisible plane. Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98258 Testcase: igt/pm_rpm/legacy-planes Testcase: igt/pm_rpm/universal-planes Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-3-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit a5e4c7d0aa6784d8abe95c3ceef0da9656d17468) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-18drm/i915: Remove WaDisableLSQCROPERFforOCL KBL workaround.Francisco Jerez
The WaDisableLSQCROPERFforOCL workaround has the side effect of disabling an L3SQ optimization that has huge performance implications and is unlikely to be necessary for the correct functioning of usual graphic workloads. Userspace is free to re-enable the workaround on demand, and is generally in a better position to determine whether the workaround is necessary than the DRM is (e.g. only during the execution of compute kernels that rely on both L3 fences and HDC R/W requests). The same workaround seems to apply to BDW (at least to production stepping G1) and SKL as well (the internal workaround database claims that it does for all steppings, while the BSpec workaround table only mentions pre-production steppings), but the DRM doesn't do anything beyond whitelisting the L3SQCREG4 register so userspace can enable it when it sees fit. Do the same on KBL platforms. Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%, and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master -- This is followed by a regression of 35% and 10% respectively for the same benchmarks and platform caused by my recent patch series switching userspace to use the dataport constant cache instead of the sampler to implement uniform pull constant loads, which caused us to hit more heavily the L3 cache (and on platforms other than KBL had the opposite effect of improving performance of the same two benchmarks). The overall effect on KBL of this change combined with the recent userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf was affected by the constant cache changes (though it improved as it did on other platforms rather than regressing), but is not significantly affected by this patch (with statistical significance of 5% and sample size 20). v2: Drop some more code to avoid unused variable warning. Fixes: 738fa1b3123f ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256 Signed-off-by: Francisco Jerez <currojerez@riseup.net> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: beignet@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.7+ Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> [Removed double Fixes tag] Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484217894-20505-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 8726f2faa371514fba2f594d799db95203dfeee0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-18pinctrl: meson: Add HDMI HPD/DDC pins functionsNeil Armstrong
Add pinctrl functions for HDMI HPD pin and DDC pins on Amlogic Meson GXL and GXBB SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18can: ti_hecc: add missing prepare and unprepare of the clockYegor Yefremov
In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). Also add error checking for clk_prepare_enable(). Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-01-18can: c_can_pci: fix null-pointer-deref in c_can_start() - set device pointerEinar Jón
The priv->device pointer for c_can_pci is never set, but it is used without a NULL check in c_can_start(). Setting it in c_can_pci_probe() like c_can_plat_probe() prevents c_can_pci.ko from crashing, with and without CONFIG_PM. This might also cause the pm_runtime_*() functions in c_can.c to actually be executed for c_can_pci devices - they are the only other place where priv->device is used, but they all contain a null check. Signed-off-by: Einar Jón <tolvupostur@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-01-18pinctrl: samsung: Remove support for Exynos4415 (SoC not supported anymore)Krzysztof Kozlowski
Support for Exynos4415 is going away because there are no internal nor external users. Since commit 46dcf0ff0de3 ("ARM: dts: exynos: Remove exynos4415.dtsi"), the platform cannot be instantiated so remove also the drivers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: ti-iodelay: remove redundant pin < 0 check on unsigned intColin Ian King
pin is an unsigned int and therefore can never be < 0 so this check is redundant. Remove the check and the associated dev_err error message. Fixes CoverityScan CID#1396438 ("Unsigned compared against 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: add simple regmap based pinctrl implementationRussell King
Add a simple regmap based pinctrl implementation for mvebu, for syscon based regmap drivers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: switch drivers to generic simple mmioRussell King
Move the mvebu pinctrl drivers over to the generic simple mmio implementation, saving a substantial number of lines of code in the process. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: provide generic simple mmio-based implementationRussell King
Provide a generic simple mmio-based probe function and methods, which pinctrl drivers can use to initialise the mvebu pinctrl subsystem. Most mvebu pinctrl drivers can use this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: provide per-control private dataRussell King
Provide per-control private data into each mvebu pinctrl method, which will allow us to provide some completely generic helpers without the global variable and per-instance function definitions that would be required when we have multiple pin controllers on a SoC. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: constify mvebu_mpp_ctrl structuresRussell King
As the mvebu_mpp_ctrl structures contain function pointers, it is preferable for these to be made read-only to prevent the function pointers being modified. So make these const. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-17Merge remote-tracking branch 'mkp-scsi/fixes' into fixesJames Bottomley
2017-01-17net: ethoc: Make needlessly global struct ethtool_ops staticTobias Klauser
Make the needlessly global struct ethtool_ops ethoc_ethtool_ops static to fix a sparse warning. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17sfc: read back RX hash config from the NIC when querying it with ethtool -xEdward Cree
Ensures that we report the key and indirection table the NIC is using, rather than (if setting them failed earlier) what we wanted it to use. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17sfc: support setting RSS hash key through ethtool APIEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17cxgb4: Implement ndo_get_phys_port_id for mgmt devGanesh Goudar
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17net: phy: dp83848: add DP83620 PHY supportAlvaro G. M
This PHY with fiber support is register compatible with DP83848, so add support for it. Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17drm/amdgpu: add support for new hainan variantsAlex Deucher
New hainan parts require updated smc firmware. Cc: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-17drm/radeon: add support for new hainan variantsAlex Deucher
New hainan parts require updated smc firmware. Cc: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-17drm/amdgpu: change clock gating mode for uvd_v4.Rex Zhu
use sw cg when decode. and hw cg when idle. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99313 https://bugzilla.kernel.org/show_bug.cgi?id=192161 Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Ack-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-17drm/amdgpu: fix program vce instance logic error.Rex Zhu
need to clear bit31-29 in GRBM_GFX_INDEX, then the program can be valid. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-17drm/amdgpu: fix bug set incorrect value to vce registerRex Zhu
Set the proper bits for clockgating setup. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-17qed: Replace memset with eth_zero_addrShyam Saini
Use eth_zero_addr to assign zero address to the given address array instead of memset when the second argument in memset is address of zero. Also, it makes the code clearer Signed-off-by: Shyam Saini <mayhs11saini@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17vxlan: fix byte order of vxlan-gpe port numberLance Richardson
vxlan->cfg.dst_port is in network byte order, so an htons() is needed here. Also reduced comment length to stay closer to 80 column width (still slightly over, however). Fixes: e1e5314de08b ("vxlan: implement GPE") Signed-off-by: Lance Richardson <lrichard@redhat.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-17scsi: mpt3sas: fix hang on ata passthrough commandsJames Bottomley
mpt3sas has a firmware failure where it can only handle one pass through ATA command at a time. If another comes in, contrary to the SAT standard, it will hang until the first one completes (causing long commands like secure erase to timeout). The original fix was to block the device when an ATA command came in, but this caused a regression with commit 669f044170d8933c3d66d231b69ea97cb8447338 Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Tue Nov 22 16:17:13 2016 -0800 scsi: srp_transport: Move queuecommand() wait code to SCSI core So fix the original fix of the secure erase timeout by properly returning SAM_STAT_BUSY like the SAT recommends. The original patch also had a concurrency problem since scsih_qcmd is lockless at that point (this is fixed by using atomic bitops to set and test the flag). [mkp: addressed feedback wrt. test_bit and fixed whitespace] Fixes: 18f6084a989ba1b (mpt3sas: Fix secure erase premature termination) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17qla2xxx: Disable out-of-order processing by default in firmwareQuinn Tran
Out of order(OOO) processing requires initiator, switch and target to support OOO. In today's environment, none of the switches support OOO. OOO requires extra buffer space which affect performance. By turning ON this feature in QLogic's FW, it delays error recovery because dropped frame is treated as out of order frame. We're turning OFF this option of speed up error recovery. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [ bvanassche: Fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
generated by cgit (git 2.34.1) at 2025-10-02 00:43:07 +0000