summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-02-14spi: bcm-qspi: Remove unnecessary platform_set_drvdata()Wei Yongjun
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-14spi: bcm-qspi: Fix bcm_qspi_bspi_read() performanceKamal Dasu
Let bcm_qspi_bspi_flash_read() return all the requested bytes by breaking up the reads for BSPI block into optimal chunks size that a BSPI block can handle. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-14ath9k: Access rchan::buf only with per_cpu helperSven Eckelmann
The relayfs was changed to use per CPU constructs to handle the rchan buffers. But the users of the rchan buffers in other parts of the kernel were not modified. This caused crashes like BUG: unable to handle kernel paging request at 00003a5198a0b910 IP: [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610 PGD 0 [ 179.522449] Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc5 #1 [...] Call Trace: <IRQ> [ 179.656426] [<ffffffffa9704373>] ? ath_rx_tasklet+0x2f3/0xd10 [<ffffffffa9702106>] ? ath9k_tasklet+0x1b6/0x230 [<ffffffffa90dcbd1>] ? tasklet_action+0xf1/0x100 [<ffffffffa9a3cb3f>] ? __do_softirq+0xef/0x284 [<ffffffffa90dd22e>] ? irq_exit+0xae/0xb0 [<ffffffffa9a3c89f>] ? do_IRQ+0x4f/0xd0 [<ffffffffa9a3aa42>] ? common_interrupt+0x82/0x82 <EOI> [ 179.703152] [<ffffffffa9a39c1d>] ? poll_idle+0x2d/0x57 [<ffffffffa908c845>] ? sched_clock+0x5/0x10 [<ffffffffa97bc8d6>] ? cpuidle_enter_state+0xf6/0x2d0 [<ffffffffa911988e>] ? cpu_startup_entry+0x14e/0x230 [<ffffffffaa3cdf70>] ? start_kernel+0x461/0x481 [<ffffffffaa3cd120>] ? early_idt_handler_array+0x120/0x120 [<ffffffffaa3cd413>] ? x86_64_start_kernel+0x14c/0x170 Code: 31 db 41 be ff ff ff ff 4c 8b 26 48 8b 6e 08 49 8b 84 24 60 05 00 00 48 8b 00 0f b7 40 04 66 89 44 24 48 eb 11 48 8b 55 40 48 98 <48> 8b 3c c2 e8 ad a0 a4 ff 01 c3 41 8d 56 01 be 00 02 00 00 48 RIP [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610 RSP <ffff9b43e7003d20> CR2: 00003a5198a0b910 Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Cc: Akash Goel <akash.goel@intel.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Reported-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath9k: clean up and fix ath_tx_count_airtimeFelix Fietkau
ath_tx_count_airtime is doing a lot of unnecessary work: - Redundant station lookup - Redundant rcu_read_lock/unlock - Useless memcpy of bf->rates - Useless NULL check of bf->bf_mpdu - Redundant lookup of the skb tid Additionally, it tries to look up the mac80211 queue index from the txq, which fails if the frame was delivered via the power save queue. This patch fixes all of these issues by passing down the right set of pointers instead of doing extra work Cc: stable@vger.kernel.org Fixes: 63fefa050477 ("ath9k: Introduce airtime fairness scheduling between stations") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath6kl: Use net_device_stats from struct net_deviceTobias Klauser
Instead of using a private copy of struct net_device_stats in struct ath6kl_vif, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fix the garage chars in board file name creationRyan Hsu
The variant[] string will be valid only if the bdf_ext is set. The string memory needs to be null-terminated to avoid the undefined garbage appended by the subsequent board file name creation. ath10k_pci 0000:04:00.0: failed to fetch board data for "bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3363��P�����" from ath10k/QCA6174/hw3.0/board-2.bin Fixes: f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file extension") Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: convert warning about non-existent OTP board id to debug messageKalle Valo
Currently ath10k unncessarily warns about board id not available from OTP: ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.9-2 api 5 features no-p2p,raw-mode crc32 b8d50af5 ath10k_pci 0000:02:00.0: board id is not exist in otp, ignore it ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 But not all boards have the board id in OTP so this is not a problem and no need to confuse the user with that info. So this can be safely changed to a debug message. Also fix grammar in the debug message. Fixes: d2e202c06ca4 ("ath10k: ignore configuring the incorrect board_id") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: silence firmware file probing warningsMichal Kazior
Firmware files are versioned to prevent older driver instances to load unsupported firmware blobs. This is reflected with a fallback logic which attempts to load several firmware files. This however produced a lot of unnecessary warnings sometimes confusing users and leading them to rename firmware files making things even more confusing. Hence use request_firmware_direct() which does not produce extra warnings. This shouldn't really break anything because most modern systems don't rely on udev/hotplug helpers to load firmware files anymore. For example it was confirmed that LEDE does not user helper. This also fixes a 60 second delay per _each_ unexistent firmware/calibration file with distros which have CONFIG_FW_LOADER_USER_HELPER_FALLBACK enabled, RHEL being a notable example. Using ath10k with firmware-2.bin this might end up into a five minute delay in boot. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [kvalo@qca.qualcomm.com: add more info to the commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: add directory to board data error messageKalle Valo
This way user has a better idea what file exactly is missing. This is needed when we switch to using request_firmware_direct() which doesn't print any errors anymore. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fetch firmware images in a loopErik Stromdahl
To make it easier to handle minimum and maximum firmware API numbers convert the firmware fetch functionality to a loop. If no firmware image is found print an error with minimum and maximum API numbers and the name of firmware directory. This is needed when we switch to using request_firmware_direct() which doesn't print any errors anymore. Also add a new function for creating the fw file name dynamically which makes it easier to add new bus support, for example SDIO and USB, later. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> [kvalo@qca.qualcomm.com: remove sdio/usb part, new error message, clarify commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14sfc: only fall back to a lower interrupt mode if it is supportedAndrew Rybchenko
If we fail to probe interrupts with our minimum mode, return that error. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sfc: MSI-X is the only interrupt mode for EF10 VFsAndrew Rybchenko
Add min_interrupt_mode specification per NIC type. It is a bit confusing because of "highest interrupt mode is less capable". Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ath10k: fix napi crash during rmmod when probe firmware failsKalle Valo
This fixes the below crash when ath10k probe firmware fails, NAPI polling tries to access a rx ring resource which was never allocated. An easy way to reproduce this is easy to remove all the firmware files, load ath10k modules and ath10k will crash when calling 'rmmod ath10k_pci'. The fix is to call napi_enable() from ath10k_pci_hif_start() so that it matches with napi_disable() being called from ath10k_pci_hif_stop(). Big thanks to Mohammed Shafi Shajakhan who debugged this and provided first version of the fix. In this patch I just fix the actual problem in pci.c instead of having a workaround in core.c. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __ath10k_htt_rx_ring_fill_n+0x19/0x230 [ath10k_core] __ath10k_htt_rx_ring_fill_n+0x19/0x230 [ath10k_core] Call Trace: [<ffffffffa113ec62>] ath10k_htt_rx_msdu_buff_replenish+0x42/0x90 [ath10k_core] [<ffffffffa113f393>] ath10k_htt_txrx_compl_task+0x433/0x17d0 [ath10k_core] [<ffffffff8114406d>] ? __wake_up_common+0x4d/0x80 [<ffffffff811349ec>] ? cpu_load_update+0xdc/0x150 [<ffffffffa119301d>] ? ath10k_pci_read32+0xd/0x10 [ath10k_pci] [<ffffffffa1195b17>] ath10k_pci_napi_poll+0x47/0x110 [ath10k_pci] [<ffffffff817863af>] net_rx_action+0x20f/0x370 Reported-by: Ben Greear <greearb@candelatech.com> Fixes: 3c97f5de1f28 ("ath10k: implement NAPI support") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fix commentAmadeusz Sławiński
I wanted to take a look and it's apparently in other header Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: use size_t for len variablesAmadeusz Sławiński
cleanup to consolidate type used for len variables Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: remove ath10k_vif_to_arvif()Amadeusz Sławiński
it adds unnecessary level of indirection, while we just access structure field Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14usb: misc: add USB251xB/xBi Hi-Speed Hub Controller DriverRichard Leitner
This patch adds a driver for configuration of the Microchip USB251xB/xBi USB 2.0 hub controller series with USB 2.0 upstream connectivity, SMBus configuration interface and two to four USB 2.0 downstream ports. Furthermore add myself as a maintainer for this driver. The datasheet can be found at the manufacturers website, see [1]. All device-tree exposed configuration features have been tested on a i.MX6 platform with a USB2512B hub. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/00001692C.pdf Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14usb: misc: usbtest: remove redundant check on retval < 0Colin Ian King
The check for retval being less than zero is always true since retval equal to -EPIPE at that point. Replace the existing conditional with just return retval. Detected with CoverityScan, CID#114349 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14tpm xen: drop unneeded chip variableJulia Lawall
The call that used chip was dropped in 1f0f30e404b3. Drop the leftover declaration and initialization. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm: fix misspelled "facilitate" in module parameter descriptionDmitry Torokhov
I typoed "facilitate" as "faciltate" a few years back... Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm_tis: fix the error handling of init_tis()Wei Yongjun
Add the missing platform_driver_unregister() and remove the duplicate platform_device_unregister(force_pdev) in the error handling case. Fixes: 00194826e6be ("tpm_tis: Clean up the force=1 module parameter") Cc: stable@vger.kernel.org Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14net: fec: fix multicast filtering hardware setupRui Sousa
Fix hardware setup of multicast address hash: - Never clear the hardware hash (to avoid packet loss) - Construct the hash register values in software and then write once to hardware Signed-off-by: Rui Sousa <rui.sousa@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14spi: lantiq-ssc: add support for Lantiq SSC SPI controllerHauke Mehrtens
This driver supports the Lantiq SSC SPI controller in master mode. This controller is found on Intel (former Lantiq) SoCs like the Danube, Falcon, xRX200, xRX300. The hardware uses two hardware FIFOs one for received and one for transferred bytes. When the driver writes data into the transmit FIFO the complete word is taken from the FIFO into a shift register. The data from this shift register is then written to the wire. This driver uses the interrupts signaling the status of the FIFOs and not the shift register. It is also possible to use the interrupts for the shift register, but they will send a signal after every word. When using the interrupts for the shift register we get a signal when the last word is written into the shift register and not when it is written to the wire. After all FIFOs are empty the driver busy waits till the hardware is not busy any more and returns the transfer status. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-14net/mlx5e: Disable preemption when doing TC statistics upcallOr Gerlitz
When called by HW offloading drivers, the TC action (e.g net/sched/act_mirred.c) code uses this_cpu logic, e.g _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets) per the kernel documention, preemption should be disabled, add that. Before the fix, when running with CONFIG_PREEMPT set, we get a BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793 asserion from the TC action (mirred) stats_update callback. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net:dsa:mv88e6xxx: use watchdog ops for 6097 chipVolodymyr Bendiuga
mv88e6097 chip requires watchdog_ops to be set. Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14cdrom: Make device operations read-onlyKees Cook
Since function tables are a common target for attackers, it's best to keep them in read-only memory. As such, this makes the CDROM device ops tables const. This drops additionally n_minors, since it isn't used meaningfully, and sets the only user of cdrom_dummy_generic_packet explicitly so the variables can all be const. Inspired by similar changes in grsecurity/PaX. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14HID: intel-ish-hid: constify device_type structureBhumika Goyal
Declare device_type structure as const as it is only stored in the type field of a device structure. This field is of type const, so add const to the declaration of device_type structure. File size before: drivers/hid/intel-ish-hid/ishtp/bus.o text data bss dec hex filename 4260 336 16 4612 1204 hid/intel-ish-hid/ishtp/bus.o File size after: drivers/hid/intel-ish-hid/ishtp/bus.o text data bss dec hex filename 4324 272 16 4612 1204 hid/intel-ish-hid/ishtp/bus.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14Merge tag 'media/v4.10-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A colorspace regression fix in V4L2 core and a CEC core bug that makes it discard valid messages" * tag 'media/v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] cec: initiator should be the same as the destination for, poll [media] videodev2.h: go back to limited range Y'CbCr for SRGB and, ADOBERGB
2017-02-14HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/rangeJason Gerecke
The prox/range bits included in the Bluetooth reports from the Intuos Pro were being ignored, leading to two issues. Firstly, the pen would never announce a BTN_TOOL_PEN event with value 0, leaving userspace to believe the pen was always active. Secondly, the driver would continue to send events for data while the packet's "prox" bit was clear. This can lead to sudden incorrect pointer jumps if the pen is slowly moved away from the tablet surface. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14EDAC, amd64: Bump driver versionBorislav Petkov
Last time we did that was when we enabled Bulldozer. Now, we enabled Zen so it is only natural ... :-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
2017-02-14Merge branch 'fixes' into nextUlf Hansson
2017-02-14mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS supportUri Yanai
Adding dedicated flag for AUTO_BKOPS in card->ext_csd structure. Read AUTO_BKOPS bit value from the device EXT_CSD and set to the card->ext_csd structure. In mmc_decode_ext_csd() add a print message in case the AUTO_BKOPS is enabled Signed-off-by: Uri Yanai <uri.yanai@sandisk.com> Signed-off-by: Alex Lemberg <alex.lemberg@sandisk.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: MAN_BKOPS_EN inverse debug message logicUri Yanai
Inverse the logic for printing the debug message. In mmc_decode_ext_csd() print message when MAN_BKOPS_EN is set Signed-off-by: Uri Yanai <uri.yanai@sandisk.com> Signed-off-by: Alex Lemberg <alex.lemberg@sandisk.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: add support for HS400 modeHeiner Kallweit
Add support for HS400 mode. The driver still misses support for tuning, therefore highspeed modes like HS400 might not work under all circumstances yet. Successfully tested on a Odroid C2 (S905 GXBB). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: remove unneeded checks in removeHeiner Kallweit
The remove callback is called only if probe finished successfully. Therefore these checks are not needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: reduce bounce buffer sizeHeiner Kallweit
A bounce buffer of 512K isn't needed as the max request size is 511 * 512 byte. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: set max block count and request sizeHeiner Kallweit
So far max_blk_count isn't set what results in a default of value 8 to be used (PAGE_SIZE / block size). Block length field has 9 bits, so set max_blk_count to 2^9-1 = 511. In addition set max_req_size because max_blk_count is also limited by max_req_size / block_size. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve interrupt handlingHeiner Kallweit
Disabling and immediately re-enabling interrupts in meson_mmc_request doesn't provide a benefit. Instead enable interrupts in probe already. And disable interrupts in remove, this was missing so far. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve meson_mmc_irq_threadHeiner Kallweit
Remove unneeded variable ret and simplify the if block. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve meson_mmc_clk_setHeiner Kallweit
The following changes are quite small, therefore I combined them in one patch. - ret doesn't need to be initialized with 0 - use standard !clk_rate notation to check for a zero value - If clk_rate is zero we return here. Therefore all further checks in this function for clk_rate != 0 are not needed. - switch from dev_warn to dev_err if the clock can't be set - If due to clock source and available divider values the requested frequency isn't matched exactly (always the case if requested frequency is 52 MHz), then just print the differing values as debug message and not as warning. - Also remove ret from the message as it is always 0. - Set member current_clock to the current requested rate and mmc->actual_clock to the current actual rate Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: minor improvements in meson_mmc_set_iosHeiner Kallweit
val isn't used in the switch clause and afterwards there's an identical statement. So remove it. In case of an unexpected bus width the error message indicates the intention to set the bus width to 4 and to go on. So remove the return statement. This return statement also conflicts with "setting to 4" because nothing would be set actually before returning. 4bit bus width are chosen as default as the vendor driver does it too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson: Assign the minimum clk rate as close to 400KHz as possibleUlf Hansson
The current code dealing with calculating mmc->f_min is a bit complicated. Additionally, the attempt to set an initial clock rate should explicitly use a rate between 100KHz to 400 KHz, according the (e)MMC/SD specs, which it doesn't. Fix the problem and clean up the code by using clk_round_rate() to pick the nearest minimum rate to 400KHz (rounded down from 400kHz). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [Heiner: Changed from 100KHz to 400KHz to get a proper rounded rate] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-02-14mmc: core: start to break apart mmc_start_areq()Linus Walleij
This function is doing to many clever things at the same time under too many various conditions. Start to make things clearer by refactoring: break out the finalization of the previous asynchronous request to its own function mmc_finalize_areq(). We can get rid of the default assignment of status and let the call deal with this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: block: respect bool returned from blk_end_request()Linus Walleij
The return value from blk_end_request() is a bool but is treated like an int. This is generally safe, but the variable also has the opaque name "ret" and gets returned from the helper function mmc_blk_cmd_err(). - Switch the variable to a bool, applies everywhere. - Return a bool from mmc_blk_cmd_err() and rename the function mmc_blk_rw_cmd_err() to indicate through the namespace that this is a helper for mmc_blk_issue_rw_rq(). - Rename the variable from "ret" to "req_pending" inside the while() loop inside mmc_blk_issue_rq_rq(), which finally makes it very clear what this while loop is waiting for. - Augment the argument "ret" to mmc_blk_rq_cmd_err() to old_req_pending so it becomes evident that this is an older state, and it is returned only if we fail to get the number of written blocks from an SD card in the function mmc_sd_num_wr_blocks(). - Augment the while() loop in mmc_blk_rq_cmd_abort(): it is evident now that we know this is a bool variable, that the function is just spinning waiting for blk_end_request() to return false. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: block: return errorcode from mmc_sd_num_wr_blocks()Linus Walleij
mmc_sd_num_wr_blocks() has an interesting construction that saves one return argument by casting (u32)-1 as error code if something goes wrong. This is however a bit confusing when the normal kernel pattern is to return an int error code on success. So instead pass a variable "blocks" that the function can fill in with the number of successfully transferred blocks and return an integer as error code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [Ulf: Changed a return code to -EIO, reported by Dan Carpenter and fixed by Linus Walleij]
2017-02-14dmaengine: rcar-dmac: Widen DMA mask to 40 bitsGeert Uytterhoeven
By default, the DMA mask covers only the low 32-bit address space, which causes SWIOTLB on arm64 to fall back to a bounce buffer for DMA transfers involving memory outside the 32-bit address space. The R-Car DMA controller hardware supports a 40-bit address space, hence widen the DMA mask to 40 bits to actually make use of this feature. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-02-14mmc: core: fix multi-bit bus width without high-speed modeAnssi Hannula
Commit 577fb13199b1 ("mmc: rework selection of bus speed mode") refactored bus width selection code to mmc_select_bus_width(). However, it also altered the behavior to not call the selection code in non-high-speed modes anymore. This causes 1-bit mode to always be used when the high-speed mode is not enabled, even though 4-bit and 8-bit bus are valid bus widths in the backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed Modes in JEDEC 84-B50). This results in a significant regression in transfer speeds. Fix the code to allow 4-bit and 8-bit widths even without high-speed mode, as before. Tested with a Zynq-7000 PicoZed 7020 board. Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13net: qcom/emac: fix a sizeof() typoDan Carpenter
We had intended to say "sizeof(u32)" but the "u" is missing. Fortunately, sizeof(32) is also 4, so the original code still works. Fixes: c4e7beea2192 ("net: qcom/emac: add ethtool support for reading hardware registers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13net: fs_enet: Simplify codeChristophe Jaillet
There is no need to use an intermediate variable to handle an error code in this case. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13net: fs_enet: Fix an error handling pathChristophe Jaillet
'of_node_put(fpi->phy_node)' should also be called if we branch to 'out_deregister_fixed_link' error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 04:55:24 +0000