| Age | Commit message (Collapse) | Author |
|---|
|
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.
In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.
Tested on a AMD Zen4 EPYC server
Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422
After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527
Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When extra warnings are enabled, gcc points out a global variable
definition in a header:
In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
123 | static const char * const amd_pstate_mode_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.
Fixes: 36c5014e5460 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The powermanagement core does various actions when a powersupply changes.
It calls into notifiers, LED triggers, other power supplies and emits an uevent.
To make sure that all these actions happen properly call power_supply_changed().
Reported-by: Rajas Paranjpe <paranjperajas@gmail.com>
Closes: https://github.com/MrChromebox/firmware/issues/420#issuecomment-2132251318
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pnp_bus_type is defined only when CONFIG_PNP=y, while being
not guarded by ifdeffery in the header. Moreover, it's not used
outside of the PNP code. Move it to the internal header to make
sure no-one will try to (ab)use it.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since we have a dev_is_pnp() macro that utilises the address of the
pnp_bus_type variable, the users, which can be compiled as modules,
will fail to build. Convert the macro to be a function and export it
to the modules to prevent build breakage.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Closes: https://lore.kernel.org/r/cc8a93b2-2504-9754-e26c-5d5c3bd1265c@gmail.com
Fixes: 2a49b45cd0e7 ("PNP: Add dev_is_pnp() macro")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/of/of_test.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240524-md-of-of_test-v1-1-6ebd078d620f@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we
know that a ctrl was allocated (in the admin connect request handler)
and we need to release pending AERs, clear ctrl->sqs and sq->ctrl
(for nvme-loop primarily), and drop the final reference on the ctrl.
However, a small window is possible where nvmet_sq_destroy starts (as
a result of the client giving up and disconnecting) concurrently with
the nvme admin connect cmd (which may be in an early stage). But *before*
kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq
live reference). In this case, sq->ctrl was allocated however after it was
captured in a local variable in nvmet_sq_destroy.
This prevented the final reference drop on the ctrl.
Solve this by re-capturing the sq->ctrl after all inflight request has
completed, where for sure sq->ctrl reference is final, and move forward
based on that.
This issue was observed in an environment with many hosts connecting
multiple ctrls simoutanuosly, creating a delay in allocating a ctrl
leading up to this race window.
Reported-by: Alex Turin <alex@vastdata.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme pci driver synchronizes with all the namespace queues during a
reset to ensure that there's no pending timeout work.
Meanwhile the timeout work potentially iterates those same namespaces to
freeze their queues.
Each of those namespace iterations use the same read lock. If a write
lock should somehow get between the synchronize and freeze steps, then
forward progress is deadlocked.
We had been relying on the nvme controller state machine to ensure the
reset work wouldn't conflict with timeout work. That guarantee may be a
bit fragile to rely on, so iterate the namespace lists without taking
potentially circular locks, as reported by lockdep.
Link: https://lore.kernel.org/all/20220930001943.zdbvolc3gkekfmcv@shindev/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The start counter for FT1 filter is wrongly set to 0 in the driver.
FT1 is used for source address violation (SAV) check and source address
starts at Byte 6 not Byte 0. Fix this by changing start counter to
ETH_ALEN in icssg_ft1_set_mac_addr().
Fixes: e9b4ece7d74b ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240527063015.263748-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In __bch_bucket_alloc_set() the lines after lable 'err:' indeed do
nothing useful after multiple cache devices are removed from bcache
code. This cleanup patch drops the useless code to save a bit CPU
cycles.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240528120914.28705-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If there are extreme heavy write I/O continuously hit on relative small
cache device (512GB in my testing), it is possible to make counter
c->gc_stats.in_use continue to increase and exceed CUTOFF_CACHE_ADD.
If 'c->gc_stats.in_use > CUTOFF_CACHE_ADD' happens, all following write
requests will bypass the cache device because check_should_bypass()
returns 'true'. Because all writes bypass the cache device, counter
c->sectors_to_gc has no chance to be negative value, and garbage
collection thread won't be waken up even the whole cache becomes clean
after writeback accomplished. The aftermath is that all write I/Os go
directly into backing device even the cache device is clean.
To avoid the above situation, this patch uses a quite conservative way
to fix: if 'c->gc_stats.in_use > CUTOFF_CACHE_ADD' happens, only wakes
up garbage collection thread when the whole cache device is clean.
Before the fix, the writes-always-bypass situation happens after 10+
hours write I/O pressure on 512GB Intel optane memory which acts as
cache device. After this fix, such situation doesn't happen after 36+
hours testing.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240528120914.28705-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, if the gc is running, when the allocator found free_inc
is empty, allocator has to wait the gc finish. Before that, the
IO is blocked.
But actually, there would be some buckets is reclaimable before gc,
and gc will never mark this kind of bucket to be unreclaimable.
So we can put these buckets into free_inc in gc running to avoid
IO being blocked.
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240528120914.28705-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
sd can set a max_sectors value that is lower than the max_hw_sectors
limit based on the block limits VPD page. While this is rather unusual,
it used to work until the max_user_sectors field was split out to cleanly
deal with conflicting hardware and user limits when the hardware limit
changes. Also set max_user_sectors to ensure the limit can properly be
stacked.
Fixes: 4f563a64732d ("block: add a max_user_discard_sectors queue limit")
Reported-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240523182618.602003-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When changing the maximum number of open zones, print that number
instead of the total number of zones.
Fixes: dc4d137ee3b7 ("null_blk: add support for max open/active zone limit for zoned devices")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240528062852.437599-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
devm_of_regulator_put_matches is called
In this patch, a software bug has been fixed.
rtq2208_ldo_match is no longer a local variable.
It prevents invalid memory access when devm_of_regulator_put_matches
is called.
Signed-off-by: Alina Yu <alina_yu@richtek.com>
Link: https://msgid.link/r/4ce8c4f16f1cf3aa4e5f36c0694dd3c5ccf3cd1c.1716870419.git.alina_yu@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Given the not fully root caused performance issues on non-x86 platforms,
enable the feature by default only for x86-64. That is the platform it
brings the most value and has gone most of the QA. Can be reconsidered
later and can be obviously opt-in enabled too on any arch.
Link: https://lore.kernel.org/linux-integrity/bf67346ef623ff3c452c4f968b7d900911e250c3.camel@gmail.com/#t
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Rename and document TPM2_OA_TMPL, as originally requested in the patch
set review, but left unaddressed without any appropriate reasoning. The
new name is TPM2_OA_NULL_KEY, has a documentation and is local only to
tpm2-sessions.c.
Link: https://lore.kernel.org/linux-integrity/ddbeb8111f48a8ddb0b8fca248dff6cc9d7079b2.camel@HansenPartnership.com/
Link: https://lore.kernel.org/linux-integrity/CZCKTWU6ZCC9.2UTEQPEVICYHL@suppilovahvero/
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
With only single call site, this makes no sense (slipped out of the
radar during the review). Open code and document the action directly
to the site, to make it more readable.
Fixes: 1b6d7f9eb150 ("tpm: add session encryption protection to tpm2_get_random()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the
maximum transfer length and the size of the transfer buffer. As such, it
does not account for the 4 bytes of header that prepends the SPI data
frame. This can result in out-of-bounds accesses and was confirmed with
KASAN.
Introduce SPI_HDRSIZE to account for the header and use to allocate the
transfer buffer.
Fixes: a86a42ac2bd6 ("tpm_tis_spi: Add hardware wait polling")
Signed-off-by: Matthew R. Ochs <mochs@nvidia.com>
Tested-by: Carol Soto <csoto@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Release the submission_state lock if alloc_guc_id() fails.
v2: Add Fixes tag and CC stable kernel
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521201711.4934-1-niranjana.vishwanathapura@intel.com
(cherry picked from commit 40672b792a36894aff3a337b695f6136ee6ac5d4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The GuC context scheduling queue is 2 entires deep, thus it is possible
for a migration job to be stuck behind a fault if migration exec queue
shares engines with user jobs. This can deadlock as the migrate exec
queue is required to service page faults. Avoid deadlock by only using
reserved BCS instances for usm migrate exec queue.
Fixes: a043fbab7af5 ("drm/xe/pvc: Use fast copy engines as migrate engine on PVC")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415190453.696553-2-matthew.brost@intel.com
Reviewed-by: Brian Welty <brian.welty@intel.com>
(cherry picked from commit 04f4a70a183a688a60fe3882d6e4236ea02cfc67)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Polling is initially attempted with timeout_base_ms enabled for
preemption, and if it exceeds this timeframe, another attempt is made
without preemption, allowing an additional 50 ms before timing out.
v2
- Rebase
v3
- Move warnings to separate patch (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Fixes: 7dc9b92dcfef ("drm/xe: Remove i915_utils dependency from xe_pcode.")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240508152216.3263109-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c81858eb52266b3d6ba28ca4f62a198231a10cdc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The buffer flags is set by wrong due to wrong parentheses, the
FL_INCOMING flag is never taken an account.
Fix it by wrapping the ternary conditional operation with parentheses.
Fixes: 3c1dfb5a69cf ("media: intel/ipu6: input system video nodes and buffer queues")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
If an error occurs after a successful alloc_fw_msg_bufs() call, some
resources should be released as already done in the remove function.
Add a new free_fw_msg_bufs() function that releases what has been allocated
by alloc_fw_msg_bufs().
Also use this new function in isys_remove() to avoid some code duplication.
Fixes: f50c4ca0a820 ("media: intel/ipu6: add the main input system driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In preparation to fixing a leak in isys_probe(), move isys_remove().
The fix will introduce a new function that will also be called from
isys_remove(). The code needs to be rearranged to avoid a forward
declaration.
Having the .remove function close to the .probe function is also more
standard.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
pcim_iomap_regions() and pcim_enable_device() are used in the probe. So
the corresponding managed resources don't need to be freed explicitly in
the remove function.
Remove the incorrect pci_release_regions() and pci_disable_device() calls.
Fixes: 25fedc021985 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, idpf enables NAPI and interrupts prior to allocating Rx
buffers.
This may lead to frame loss (there are no buffers to place incoming
frames) and even crashes on quick ifup-ifdown. Interrupts must be
enabled only after all the resources are here and available.
Split interrupt init into two phases: initialization and enabling,
and perform the second only after the queues are fully initialized.
Note that we can't just move interrupt initialization down the init
process, as the queues must have correct a ::q_vector pointer set
and NAPI already added in order to allocate buffers correctly.
Also, during the deinit process, disable HW interrupts first and
only then disable NAPI. Otherwise, there can be a HW event leading
to napi_schedule(), but the NAPI will already be unavailable.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the interrupt is enabled, the function lan8841_config_intr tries to
clear any pending interrupts by reading the interrupt status, then
checks the return value for errors and then continue to enable the
interrupt. It has been seen that once the system gets out of sleep mode,
the interrupt status has the value 0x400 meaning that the PHY detected
that the link was in low power. That is correct value but the problem is
that the check is wrong. We try to check for errors but we return an
error also in this case which is not an error. Therefore fix this by
returning only when there is an error.
Fixes: a8f1a19d27ef ("net: micrel: Add support for lan8841 PHY")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fec_probe() fails or fec_drv_remove() needs to release the
fec queue and remove a NAPI context, therefore add a function
corresponding to fec_enet_init() and call fec_enet_deinit() which
does the opposite to release memory and remove a NAPI context.
Fixes: 59d0f7465644 ("net: fec: init multi queue date structure")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240524050528.4115581-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-27
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 18 files changed, 583 insertions(+), 55 deletions(-).
The main changes are:
1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread
while the promise was to filter by process, from Andrii Nakryiko.
2) Fix the recent influx of syzkaller reports to sockmap which triggered
a locking rule violation by performing a map_delete, from Jakub Sitnicki.
3) Fixes to netkit driver in particular on skb->pkt_type override upon pass
verdict, from Daniel Borkmann.
4) Fix an integer overflow in resolve_btfids which can wrongly trigger build
failures, from Friedrich Vock.
5) Follow-up fixes for ARC JIT reported by static analyzers,
from Shahab Vahedi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
bpf: Allow delete from sockmap/sockhash only if update is allowed
selftests/bpf: Add netkit test for pkt_type
selftests/bpf: Add netkit tests for mac address
netkit: Fix pkt_type override upon netkit pass verdict
netkit: Fix setting mac address in l2 mode
ARC, bpf: Fix issues reported by the static analyzers
selftests/bpf: extend multi-uprobe tests with USDTs
selftests/bpf: extend multi-uprobe tests with child thread case
libbpf: detect broken PID filtering logic for multi-uprobe
bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
bpf: fix multi-uprobe PID filtering logic
bpf: Fix potential integer overflow in resolve_btfids
MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT
====================
Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When powering on a null_blk device that is not already on, the return
value ret that is initialized to be count is reused to check the return
value of null_add_dev(), leading to nullb_device_power_store() to return
null_add_dev() return value (0 on success) instead of "count".
So make sure to set ret to be equal to count when there are no errors.
Fixes: a2db328b0839 ("null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20240527043445.235267-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Fix regression in gpcv2 PM domain for i.MX8
* tag 'pmdomain-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Add delay after power up handshake
|
|
Don't stuff the values directly into the queue without any
synchronization, but instead delay applying the queue limits in
the caller and let dm_set_zones_restrictions work on the limit
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240527123634.1116952-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold it into the only caller in preparation to changes in the
queue limits setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240527123634.1116952-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Keep it together with the rest of the zoned code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240527123634.1116952-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kthread creation may possibly fail inside race_signal_callback(). In
such a case stop the already started threads, put the already taken
references to them and return with error code.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2989f6451084 ("dma-buf: Add selftests for dma-fence")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522181308.841686-1-pchelkin@ispras.ru
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Trying to build parisc:allmodconfig with gcc 12.x or later results
in the following build error.
drivers/gpu/drm/nouveau/nvif/object.c: In function 'nvif_object_mthd':
drivers/gpu/drm/nouveau/nvif/object.c:161:9: error:
'memcpy' accessing 4294967264 or more bytes at offsets 0 and 32 overlaps 6442450881 bytes at offset -2147483617 [-Werror=restrict]
161 | memcpy(data, args->mthd.data, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/nouveau/nvif/object.c: In function 'nvif_object_ctor':
drivers/gpu/drm/nouveau/nvif/object.c:298:17: error:
'memcpy' accessing 4294967240 or more bytes at offsets 0 and 56 overlaps 6442450833 bytes at offset -2147483593 [-Werror=restrict]
298 | memcpy(data, args->new.data, size);
gcc assumes that 'sizeof(*args) + size' can overflow, which would result
in the problem.
The problem is not new, only it is now no longer a warning but an error
since W=1 has been enabled for the drm subsystem and since Werror is
enabled for test builds.
Rearrange arithmetic and use check_add_overflow() for validating the
allocation size to avoid the overflow. While at it, split assignments
out of if conditions.
Fixes: a61ddb4393ad ("drm: enable (most) W=1 warnings by default across the subsystem")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Joe Perches <joe@perches.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240524134817.1369993-1-linux@roeck-us.net
|
|
mitigation become invalid
When a trip point becomes invalid after being crossed on the way up,
it is involved in a mitigation episode that needs to be adjusted to
compensate for the trip going away.
For this reason, introduce thermal_zone_trip_down() as a wrapper
around thermal_trip_crossed() and make thermal_zone_set_trip_temp()
call it if the new temperature of the trip at hand is equal to
THERMAL_TEMP_INVALID and it has been crossed on the way up to trigger
all of the necessary adjustments in user space, the thermal debug
code and the zone governor.
Fixes: 8c69a777e480 ("thermal: core: Fix the handling of invalid trip points")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a helper function called thermal_trip_crossed() to be invoked by
__thermal_zone_device_update() in order to notify user space, the
thermal debug code and the zone governor about trip crossing.
Subsequently, this will also be used in the case when a trip point
becomes invalid after being crossed on the way up.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit a6258fde8de3 ("thermal/debugfs: Make tze_seq_show() skip invalid
trips and trips with no stats") modified tze_seq_show() to skip invalid
trips, but it overlooked the fact that a trip may become invalid during
a mitigation eposide involving it, in which case its statistics should
still be reported.
For this reason, remove the invalid trip temperature check from the
main loop in tze_seq_show().
The trips that have never been valid will still be skipped after this
change because there are no statistics to report for them.
Fixes: a6258fde8de3 ("thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The temperature and hysteresis of a trip point may change during a
mitigation episode it is involved in (it may even become invalid
altogether), so in order to avoid possible confusion related to that,
store the temperature and hysteresis of trip points at the time they
are crossed on the way up and print those values instead of their
current temperature and hysteresis.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.
While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.
Fixes: f293501c61c5 ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If an error code other than EINVAL, ENODEV or ETIME is returned
by acpi_ec_read() / acpi_ec_write(), then AE_OK is incorrectly
returned by acpi_ec_space_handler().
Fix this by only returning AE_OK on success, and return AE_ERROR
otherwise.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When a multi-byte address space access is requested, acpi_ec_read()/
acpi_ec_write() is being called multiple times.
Abort such operations if a single call to acpi_ec_read() /
acpi_ec_write() fails, as the data read from / written to the EC
might be incomplete.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The platform driver conversion of EINJ mistakenly used
platform_device_del() to unwind platform_device_register_full() at
module exit. This leads to a small leak of one 'struct platform_device'
instance per module load/unload cycle. Switch to
platform_device_unregister() which performs both device_del() and final
put_device().
Fixes: 5621fafaac00 ("EINJ: Migrate to a platform driver")
Cc: 6.9+ <stable@vger.kernel.org> # 6.9+
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are two type of classes. "Leaf classes" that are the
bottom of the class hierarchy. "Inner classes" that are neither
the root class nor leaf classes. QoS rules can only specify leaf
classes as targets for traffic.
Root
/ \
/ \
1 2
/\
/ \
4 5
classes 1,4 and 5 are leaf classes.
class 2 is a inner class.
When a leaf class made as inner, or vice versa, resources associated
with send queue (send queue buffers and transmit schedulers) are not
getting freed.
Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240523073626.4114-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The "EZpad 6s Pro" uses the same touchscreen as the "EZpad 6 Pro B",
unlike the "Ezpad 6 Pro" which has its own touchscreen.
Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-3-hdegoede@redhat.com
|
|
This is a tablet created by GlobalSpace Technologies Limited
which uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB of storage.
Link: https://web.archive.org/web/20171102141952/http://globalspace.in/11.6-device.html
Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-2-hdegoede@redhat.com
|
|
properties from cmdline
On x86/ACPI platforms touchscreens mostly just work without needing any
device/model specific configuration. But in some cases (mostly with Silead
and Goodix touchscreens) it is still necessary to manually specify various
touchscreen-properties on a per model basis.
touchscreen_dmi is a special place for DMI quirks for this, but it can be
challenging for users to figure out the right property values, especially
for Silead touchscreens where non of these can be read back from
the touchscreen-controller.
ATM users can only test touchscreen properties by editing touchscreen_dmi.c
and then building a completely new kernel which makes it unnecessary
difficult for users to test and submit properties when necessary for their
laptop / tablet model.
Add support for specifying properties on the kernel commandline to allow
users to easily figure out the right settings. See the added documentation
in kernel-parameters.txt for the commandline syntax.
Cc: Gregor Riepl <onitake@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240523143601.47555-1-hdegoede@redhat.com
|
