summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-05-25spi/pl022: fix up differences between ARM and ST versionsLinus Walleij
The PL022 SPI driver did not cleanly separate between the original unmodified ARM version and the ST Microelectronics versions. Split this more cleanly and fix some whitespace moaning from checkpatch at the same time. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/spi_mpc8xxx: Do not use map_tx_dma to unmap rx_dmaJoakim Tjernlund
This fixes a typo were map_tx_dma is used instead of map_rx_dma, casing the driver to unmap rx_dma when it shouldn't. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/spi_mpc8xxx: Fix QE mode Litte EndianJoakim Tjernlund
QE mode uses Little Endian so words > 8 bits are byte swapped. Workaround this by always enforcing wordsize 8 for words > 8 bits. Unfortunately this will not work for LSB transfers where wordsize is > 8 bits so disable these for now. Also move the different quirks into its own function to keep mpc8xxx_spi_setup_transfer() sane. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-24RDMA/nes: Async event for closed QP causes crashFaisal Latif
Under abnormal termination, modify_qp() closes the QP, and async event (AE) handling also attempts to close the same QP, causing a crash. Fix this by checking the state of the QP before processing the AE. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/nes: Have ethtool read hardware registers for rx/tx statsFaisal Latif
Enhance ethtool to read hardware registers for rcv/tx error stats. Also add support for free pbl resources. Remove cq depth stats, which are not used. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Only insert sq qid in lookup tableSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Support IB_WR_READ_WITH_INV opcodeSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Set fence flag for inv-local-stag work requestsSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Update some HW limitsSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Don't limit fastreg page list depthSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Return proper errors in fastreg mr/pbl allocationSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Fix overflow bug in CQ armSteve Wise
- wrap cq->cqidx_inc based on cq size. - optimize t4_arm_cq logic. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Optimize CQ overflow detectionSteve Wise
1) save the timestamp flit in the cq when we consume a CQE. 2) always compare the saved flit with the previous entry flit when reading the next CQE entry. If the flits don't compare, then we have overflowed. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: CQ size must be IQ size - 2Steve Wise
We need 1 extra entry for the status page and 1 to always have 1 free entry to detect when the queue is full. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Register RDMA provider based on LLD state_change eventsSteve Wise
The LLD now supports proper UP state change events, so move the RDMA provider registration to UP path. This fixes a crash when loading iw_cxgb4 _after_ the NFS/RDMA transport is up and running. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Detach from the LLD after unregistering RDMA deviceSteve Wise
In the RDMA core unregister path, kernel users will be calling down into the T4 provider to release resources. So we cannot detach from the LLD until this process completes. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-25fbdev: fix erroneous index in drivers/video/sh_mobile_lcdcfb.cGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-24macvlan: do proper cleanup in macvlan_common_newlink() V2Jiri Pirko
Fixes possible memory leak. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-24be2net: Bug fix in init code in probeSarveshwar Bandi
PCI function reset needs to invoked after fw init ioctl is issued. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-24Merge branch 'devel-stable' into develRussell King
2010-05-24ath9k: Fix rx of mcast/bcast frames in PS mode with auto sleepVasanthakumar Thiagarajan
The functionality to keep the device awake until it is done with the rx of any mcast/bcast frames which are pending on AP should also be added to the hardwares which support auto sleep feature. This patch fixes frequent failures in ARP resolution when it is initiated by the other end. Currently auto sleep is enabled only for ar9003 in ath9k. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24iwlwifi: testing the wrong variable in iwl_add_bssid_station()Dan Carpenter
The intent here is to test that "sta_id_r" is a valid pointer. We do this same test later on in the function. Btw iwl_add_bssid_station() is called from two places and "sta_id_r" is a valid pointer from both callers. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24ath9k_htc: rare leak in ath9k_hif_usb_alloc_tx_urbs()Dan Carpenter
This is obviously a small picky thing. The original error handling code doesn't free the most recent allocations which haven't been added to the hif_dev->tx.tx_buf list yet. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24ath9k_htc: dereferencing before check in hif_usb_tx_cb()Dan Carpenter
After c11d8f89d3b7: "ath9k_htc: Simplify TX URB management" we no longer assume that tx_buf is a non-null pointer. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: Fix rt2800usb TX descriptor writing.Gertjan van Wingerde
The recent changes to skb handling introduced a bug in the rt2800usb TX descriptor writing whereby the length of the USB packet wasn't calculated correctly. Found via code inspection, as the devices themselves didn't seem to mind. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions.Gertjan van Wingerde
(Based on a patch created by Ondrej Zary) In some circumstances the Ralink devices do not properly go to sleep or wake up, with timeouts occurring. Fix this by retrying telling the device that it has to wake up or sleep. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24Revert "ath9k: Group Key fix for VAPs"John W. Linville
This reverts commit 03ceedea972a82d343fa5c2528b3952fa9e615d5. This patch was reported to cause a regression in which connectivity is lost and cannot be reestablished after a suspend/resume cycle. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24wireless: update gfp/slab.h includesTejun Heo
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: don't use to_pci_dev in rt2x00pci_uninitializeHelmut Schaa
Don't use to_pci_dev in rt2x00pci_uninitialize to get the allocated irq as it won't work for platform devices (SoC). Instead, use the irq field that's already used everywhere else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24ath5k: consistently use rx_bufsize for RX DMABruno Randolf
We should use the same buffer size we set up for DMA also in the hardware descriptor. Previously we used common->rx_bufsize for setting up the DMA mapping, but used skb_tailroom(skb) for the size we tell to the hardware in the descriptor itself. The problem is that skb_tailroom(skb) can give us a larger value than the size we set up for DMA before. This allows the hardware to write into memory locations not set up for DMA. In practice this should rarely happen because all packets should be smaller than the maximum 802.11 packet size. On the tested platform rx_bufsize is 2528, and we allocated an skb of 2559 bytes length (including padding for cache alignment) but sbk_tailroom() was 2592. Just consistently use rx_bufsize for all RX DMA memory sizes. Also use the return value of the descriptor setup function. Cc: stable@kernel.org Signed-off-by: Bruno Randolf <br1@einfach.org> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24HID: Add the GYR4101US USB ID to hid-gyrationCory Maccarrone
This change adds in the USB product ID for the Gyration GYR4101US USB media center remote control. This remote is similar enough to the other two devices that this driver can be used without any other changes to get full support for the remote. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-24[SCSI] ipr: improve interrupt service routine performanceWayne Boyer
During performance testing on P7 machines it was observed that the interrupt service routine was doing unnecessary MMIO operations. This patch rearranges the logic of the routine and moves some of the code out of the main routine. The result is that there are now fewer MMIO operations in the performance path of the code. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] ipr: set the data list length in the request control blockWayne Boyer
In bring up testing for the new 64 bit adapters, the first read command failed after loading the driver. The cause was that the command requires more than one scatter gather element and the corresponding code to set the data list length in the request control block was missing. This patch adds the correct assignment. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] ipr: fix a register read to use the correct address for 64 bit adaptersWayne Boyer
Fix ipr_reset_enable_ioa() to read the correct IOA to host interrupt register address for 64 bit adapters. We need to read the lower 32 bits, not the upper 32 bits. Also change the write of the 64 bit mask value to a single writeq instead of two writel calls. Finally, use the correct u8 type for the type field in the ipr_resource_entry structure. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] ipr: include the resource path in the IOA status area structureWayne Boyer
The IOA status area now includes the new resource path field for 64 bit adapters. This patch changes the driver to fix the ioasa structure and to use the correct structure definition based on the type of adatper. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] ipr: implement fixes for 64 bit adapter supportWayne Boyer
Implement some small fixes for 64 bit support that were preventing the adapter from becoming operational. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] be2iscsi: correct return value in mgmt_invalidate_icds()Dan Carpenter
This function should return 0 on error. Returning -1 would cause a crash. Also there is an extra space before the newline character and a missing space between the "for" and the "mgmt_invalidate_icds". I put the string on one line. The current version of checkpatch.pl complains that the line is too long, but it makes grepping easier. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: cmd640: fix kernel oops in test_irq() method pdc202xx_old: ignore "FIFO empty" bit in test_irq() method pdc202xx_old: wire test_irq() method for PDC2026x IDE: pass IRQ flags to the IDE core ide: fix comment typo in ide.h
2010-05-24Merge branch 'bkl/ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
2010-05-24Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: ds2760_battery: Document ABI change ds2760_battery: Make charge_now and charge_full writeable power_supply: Add support for writeable properties power_supply: Use attribute groups power_supply: Add test_power driver tosa_battery: Fix build error due to direct driver_data usage wm97xx_battery: Quieten sparse warning (bat_set_pdata not declared) ds2782_battery: Get rid of magic numbers in driver_data ds2782_battery: Add support for ds2786 battery gas gauge pda_power: Add function callbacks for suspend and resume wm831x_power: Use genirq Driver for Zipit Z2 battery chip ds2782_battery: Fix clientdata on removal
2010-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits) sh: fix up sh7785lcr_32bit_defconfig. arch/sh/lib/strlen.S: Checkpatch cleanup sh: fix up sh7786 dmaengine build. sh: guard cookie consistency across termination in the DMA driver sh: prevent the DMA driver from unloading, while in use sh: fix Oops in the serial SCI driver sh: allow platforms to specify SD-card supported voltages mmc: let MFD's provide supported Vdd card voltages to tmio_mmc sh: disable SD-card write-protection detection on kfr2r09 mfd: pass platform flags down to the tmio_mmc driver tmio: add a platform flag to disable card write-protection detection sh: Add SDHI DMA support to migor sh: Add SDHI DMA support to kfr2r09 sh: Add SDHI DMA support to ms7724se sh: Add SDHI DMA support to ecovec mmc: add DMA support to tmio_mmc driver, when used on SuperH sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell sh: add DMA slave definitions to sh7724 sh: add DMA slaves for two SDHI controllers to sh7722 ...
2010-05-24Revert "ath9k: Group Key fix for VAPs"Linus Torvalds
This reverts commit 03ceedea972a82d343fa5c2528b3952fa9e615d5, since it breaks resume from suspend-to-ram on Rafael's Acer Ferrari One. NetworkManager thinks everything is ok, but it can't connect to the AP to get an IP address after the resume. In fact, it even breaks resume for non-ath9k chipsets: reverting it also fixes Rafael's Toshiba Protege R500 with the iwlagn driver. As Johannes says: "Indeed, this patch needs to be reverted. That mac80211 change is wrong and completely unnecessary." Reported-and-requested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Cc: Daniel Yingqiang Ma <yma.cool@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: of: change of_match_device to work with struct device of: Remove duplicate fields from of_platform_driver drivercore: Add of_match_table to the common device drivers arch/microblaze: Move dma_mask from of_device into pdev_archdata arch/powerpc: Move dma_mask from of_device into pdev_archdata of: eliminate of_device->node and dev_archdata->{of,prom}_node of: Always use 'struct device.of_node' to get device node pointer. i2c/of: Allow device node to be passed via i2c_board_info driver-core: Add device node pointer to struct device of: protect contents of of_platform.h and of_device.h of/flattree: Make unflatten_device_tree() safe to call from any arch of/flattree: make of_fdt.h safe to unconditionally include.
2010-05-24fusion: fix kernel-doc notationBen Hutchings
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24scsi_scan.c: fix/convert functions to use kernel-docRandy Dunlap
scsi_scan.c: fix incorrectly formatted kernel-doc notation & convert documentation of 2 functions into kernel-doc. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24HID: fix hid-roccat-kone for bin_attr API changeStephen Rothwell
After merging the driver-core tree, today's linux-next build (x86_64 allmodconfig) produced these warnings: drivers/hid/hid-roccat-kone.c:694: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:696: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:701: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:703: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:708: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:710: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:715: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:717: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:722: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:724: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:729: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:731: warning: initialization from incompatible pointer type Introduced by commit 867040163f10f2b52b45bc573f330d6eb28f5914 ("sysfs: add struct file* to bin_attr callbacks") from the driver-core tree interacting with commit 14bf62cde79423a02a590e02664ed29a36facec1 ("HID: add driver for Roccat Kone gaming mouse") from the hid tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-24fec: add support for PHY interface platform dataBaruch Siach
The i.MX25 PDK uses RMII to communicate with its PHY. This patch adds the ability to configure RMII, based on platform data. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-24tun: Update classid on packet injectionHerbert Xu
This patch makes tun update its socket classid every time we inject a packet into the network stack. This is so that any updates made by the admin to the process writing packets to tun is effected. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23net/irda: bfin_sir: IRDA is not affected by anomaly 05000230Graf Yang
Anomaly 05000230 (over sampling of the UART STOP bit) applies only when the peripheral is operating in UART mode. So drop the anomaly handling in the IRDA code. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23isdn/gigaset: remove dummy CAPI method implementationsTilman Schmidt
Dummy implementations for the optional CAPI controller operations load_firmware and reset_ctr can cause userspace callers to hang indefinitely. It's better not to implement them at all. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 14:25:07 +0000