summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-05-28drm/i915: Rebind bo if currently bound with incorrect alignment.Chris Wilson
Whilst pinning the buffer, check that that its current alignment matches the requested alignment. If it does not, rebind. This should clear up any final render errors whilst resuming, for reference: Bug 27070 - [i915] Page table errors with empty ringbuffer https://bugs.freedesktop.org/show_bug.cgi?id=27070 Bug 15502 - render error detected, EIR: 0x00000010 https://bugzilla.kernel.org/show_bug.cgi?id=15502 Bug 13844 - i915 error: "render error detected" https://bugzilla.kernel.org/show_bug.cgi?id=13844 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Include pitch in set_base debug statement.Chris Wilson
Add the pitch that we about to write into the control register along with the base, offset and coordinates that go into the other control registers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Only print "nothing to do" debug message as required.Chris Wilson
If the FBC is already disabled, then we do not even attempt to disable FBC and so there is no point emitting a debug statement at that point, having already emitted one saying why we are disabling FBC. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Propagate error from unbinding an unfenceable object.Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Avoid nesting of domain changes when setting display planeChris Wilson
Nesting domain changes will cause confusion when trying to interpret the tracepoints describing the sequence of changes for the object, as well as obscuring the order of operations for the reader of the code. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28libertas: fix uninitialized variable warningPrarit Bhargava
Fixes: drivers/net/wireless/libertas/rx.c: In function process_rxed_802_11_packet: drivers/net/wireless/libertas/rx.c:354: error: radiotap_hdr.flags may be used uninitialized in this function Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28drm/i915: Hold the spinlock whilst resetting unpin_work along error pathChris Wilson
Delay taking the mutex until we need to and ensure that we hold the spinlock when resetting unpin_work on the error path. Also defer the debugging print messages until after we have released the spinlock. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Kristian Høgsberg <krh@bitplanet.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28ath9k: Fix bug in the way "bf_tx_aborted" of struct ath_buf is usedVasanthakumar Thiagarajan
This bug was introduced by the following commit Author: Vasanthakumar Thiagarajan <vasanth@atheros.com> Date: Thu Apr 15 17:38:46 2010 -0400 ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Wrong buffer is checked for bf_tx_aborted field in ath_tx_num_badfrms(), this may result in a rate scaling with wrong feedback (number of unacked frames in this case). It is the last one in the chain of buffers for an aggregate frame that should be checked. Also it misses the initialization of this field in the buffer, this may lead to a situation where we stop the sw retransmission of failed subframes associated to this buffer. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28drm/i915: Only print an message if there was an errorChris Wilson
Only report an error if the GPU has actually detected one, otherwise we are just hung. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28ath9k: Fix ath_print in xmit for hardware reset.Justin P. Mattock
ath_print in xmit.c should say "Reseting hardware" instead of Resetting HAL!(since HAL is being fazed out). dmesg shows: [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Fix leds-gpio openfirmware compile issue leds: Kconfig fixes
2010-05-28Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux: ARM: S5PV210: serial: Fix section mismatch warning ARM: s3c2410_defconfig: Add new machines ARM: s3c6400_defconfig: Add framebuffer and basic LCD ARM: s3c6400_defconfig: Add RTC driver support ARM: s3c6400_defconfig: Enable USB host side ARM: s3c6400_defconfig: Add SPI driver ARM: s3c6400_defconfig: Update compiled machines ARM: S5P: Regoster clk_xusbxti clock for hsotg driver ARM: S3C64XX: Add USB OTG HCLK to the list of clocks ARM: SAMSUNG: gpio-cfg.h: update documentation ARM: SAMSUNG: Documentation: add documentation on GPIO code ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin() ARM: S3C24XX: Documentation: add section on gpiolib changes ARM: S3C24XX: Documentation: update GPIO documentation ARM: S3C24XX: Documentation: update documentation overview ARM: SAMSUNG: Documentation: update directory layout ARM: SAMSUNG: Documentation: update the list of SoCs supported
2010-05-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits) netlink: bug fix: wrong size was calculated for vfinfo list blob netlink: bug fix: don't overrun skbs on vf_port dump xt_tee: use skb_dst_drop() netdev/fec: fix ifconfig eth0 down hang issue cnic: Fix context memory init. on 5709. drivers/net: Eliminate a NULL pointer dereference drivers/net/hamradio: Eliminate a NULL pointer dereference be2net: Patch removes redundant while statement in loop. ipv6: Add GSO support on forwarding path net: fix __neigh_event_send() vhost: fix the memory leak which will happen when memory_access_ok fails vhost-net: fix to check the return value of copy_to/from_user() correctly vhost: fix to check the return value of copy_to/from_user() correctly vhost: Fix host panic if ioctl called with wrong index net: fix lock_sock_bh/unlock_sock_bh net/iucv: Add missing spin_unlock net: ll_temac: fix checksum offload logic net: ll_temac: fix interrupt bug when interrupt 0 is used sctp: dubious bitfields in sctp_transport ipmr: off by one in __ipmr_fill_mroute() ...
2010-05-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: remove detritus left by "mm: make read_cache_page synchronous" fix fs/sysv s_dirt handling fat: convert to use the new truncate convention. ext2: convert to use the new truncate convention. tmpfs: convert to use the new truncate convention fs: convert simple fs to new truncate kill spurious reference to vmtruncate fs: introduce new truncate sequence fs/super: fix kernel-doc warning fs/minix: bugfix, number of indirect block ptrs per block depends on block size rename the generic fsync implementations drop unused dentry argument to ->fsync fs: Add missing mutex_unlock Fix racy use of anon_inode_getfd() in perf_event.c get rid of the magic around f_count in aio VFS: fix recent breakage of FS_REVAL_DOT Revert "anon_inode: set S_IFREG on the anon_inode"
2010-05-28netdev/fec: fix ifconfig eth0 down hang issueBryan Wu
BugLink: http://bugs.launchpad.net/bugs/559065 In fec open/close function, we need to use phy_connect and phy_disconnect operation before we start/stop phy. Otherwise it will cause system hang. Only call fec_enet_mii_probe() in open function, because the first open action will cause NULL pointer error. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28ARM: S5PV210: serial: Fix section mismatch warningMarek Szyprowski
Rename the structure to avoid the following warning: WARNING: drivers/serial/built-in.o(.data+0x534): Section mismatch in reference from the variable s5p_serial_drv to the function .devexit.text:s3c24xx_serial_remove() The variable s5p_serial_drv references the function __devexit s3c24xx_serial_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28cnic: Fix context memory init. on 5709.Michael Chan
We need to zero context memory on 5709 in the function cnic_init_context(). Without this, iscsid restart on 5709 will not work because of stale data. TX context blocks should not be initialized by cnic_init_context() because of the special remapping on 5709. Update version to 2.1.2. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28drivers/net: Eliminate a NULL pointer dereferenceJulia Lawall
At the point of the print, dev is NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28drivers/net/hamradio: Eliminate a NULL pointer dereferenceJulia Lawall
At the point of the print, dev is NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28be2net: Patch removes redundant while statement in loop.Sarveshwar Bandi
Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28leds: Fix leds-gpio openfirmware compile issueRichard Purdie
Fix a compile issue when openfirmware is enabled from commit 2146325df2c2640059a9e064890c30c6e259b458. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-28leds: Kconfig fixesRichard Purdie
Soekris net5501 is x86 only and cleanup some undeeded dependencies Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-28drm/nv50: use alternate source of SOR_MODE_CTRL for DP hackBen Skeggs
Fixes module unload+reload on Dell M4500, where the "normal" registers get reset to 0. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28drm/nouveau: fix dual-link displays when plugged into single-link outputsBen Skeggs
When selecting the native mode for a display we weren't taking into account whether or not it was actually supported on that particular output. This patch modifies our native mode selection to run all modes through mode_valid() first. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28drm/nv50: obey dcb->duallink_possibleBen Skeggs
It was once assumed that all G8x had dual-link TMDS everywhere, this isn't actually the case - especially considering passive DP->DVI converters and some HDMI connectors only support single-link. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28drm/nv50: fix duallink_possible calculation for DCB 4.0 cardsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28drm/nouveau: don't execute INIT_GPIO unless we're really running the tableBen Skeggs
This resulted in accidently switching off the eDP panel on certain laptops since the default state in the GPIO table was off. Fixes rh#582621 Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28drm/nv40: allow cold-booting of nv4x chipsetsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28drm/nouveau: fix POST detection for certain chipsetsBen Skeggs
We totally fail at detecting un-POSTed chipsets prior to G80. This commit changes the pre-G80 POST detection to read the programmed horizontal total from CRTC 0, and assume the card isn't POSTed if it's 0. NVIDIA use some other heuristics more similar to what we do on G80, but I wasted quite a long time trying to figure out the exact specifics of what they do so we can try this for a bit instead. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28drm/nouveau: Add getparam for current PTIMER time.Marcin Kościelnicki
This will be useful for computing GPU-CPU latency, including GL_ARB_timer_query extension. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28drm/nouveau: allow cursor image and position to survive suspendMaarten Maathuis
- This isn't triggered yet on a normal kernel, because it still does a VT switch, but it seemed like a good idea to fix this now. Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-27drop unused dentry argument to ->fsyncChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: implement dump_id force param libata: disable ATAPI AN by default libata-sff: make BMDMA optional libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf libata-sff: separate out BMDMA init libata-sff: separate out BMDMA irq handler libata-sff: ata_sff_irq_clear() is BMDMA specific sata_mv: drop unncessary EH callback resetting
2010-05-27acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLINGLen Brown
api_pad exclusively uses MONITOR/MWAIT to sleep in idle, so it does not need the wakeup IPI during idle sleep that is provoked by clearing TS_POLLING. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Shaohua Li <shaohua.li@intel.com>
2010-05-27ACPI: allow a native cpuidle driver to displace ACPILen Brown
The ACPI driver would fail probe when it found that another driver had previously registered with cpuidle. But this is a natural situation, as a native hardware cpuidle driver should be able to bind instead of ACPI, and the ACPI processor driver should be able to handle yielding control of C-states while still handling P-states and T-states. Add a KERN_DEBUG line showing when acpi_idle does successfully register. Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-27cpuidle: make cpuidle_curr_driver staticLen Brown
cpuidle_register_driver() sets cpuidle_curr_driver cpuidle_unregister_driver() clears cpuidle_curr_driver We should't expose cpuidle_curr_driver to potential modification except via these interfaces. So make it static and create cpuidle_get_driver() to observe it. Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28mfd: Rename twl5031 sih modulesIlkka Koskinen
Fix the names of twl5031 specific sih modules to match the documentation. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Storage class for timberdale should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Remove unneeded and dangerous clearing of clientdataWolfram Sang
Unlike real i2c-devices which get detached from the driver, dummy-devices get truly unregistered. So, there has never been a need to clear the clientdata because the device will go away anyhow. For the occasions fixed here, clearing clientdata was even dangerous as the structure was freed already. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: New AB8500 driverRabin Vincent
Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28gpio: Fix inverted rdc321x gpio data out registersFlorian Fainelli
rdc_gpio_set_value_impl has the gpio data registers 1 and 2 inverted, fix this. Signed-off-by: Bernhard Loos <bernhardloos@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Change rdc321x resources flags to IORESOURCE_IOFlorian Fainelli
The rdc321x southbridge PCI device has no MEM PCI resources that we could pass to mfd_add_devices. Since 33254dd5, mfd_add_device checks for the mem_base argument that we set to NULL. Changing the resources passed to our MFD cells from IORESOURCE_MEM to IORESOURCE_IO fixes that. Since we use those resources as offsets to the PCI configuration space base address of the southbridge device this is also more adequate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Move pcf50633 irq related functions to its own file.Lars-Peter Clausen
This reduces code clutter a bit and will ease an migration to genirq. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Use threaded irq for pcf50633Lars-Peter Clausen
Use threaded oneshot irq handler instead of normal irq handler and a workqueue. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_readLars-Peter Clausen
Currently it's not guaranteed that request struct is not already freed when reading from it. Fix this by moving synced request related fields from the pcf50633_adc_request struct to its own struct and store it on the functions stack. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Fix pcf50633 bitfield logic in interrupt handlerLars-Peter Clausen
Those constants are alreay bitfields. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28gpio: rdc321x needs to select MFD_CORERandy Dunlap
Fix rdc321x-southbridge build: GPIO_RDC321X needs to select MFD_CORE so that the core is built at the same (or higher) tristate level. rdc321x-southbridge.c:(.devinit.text+0x6103): undefined reference to `mfd_add_devices' rdc321x-southbridge.c:(.devexit.text+0xe5f): undefined reference to `mfd_remove_devices' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Use menuconfig for quicker config editingRandy Dunlap
Change MFD 'menu' to 'menuconfig' to facilitate easy (one-click) disabling of all MFD drivers. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: AB3550 core driverMattias Wallin
This adds a core driver for the AB3550 mixed-signal circuit found in the ST-Ericsson U300 platforms. This driver is a singleton proxy for all access to the AB3550 sub functionality drivers which can be added on top of this one: RTC, regulators, battery and system power control, vibrator, LEDs and an ALSA codec. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: AB3100 register access change to abx500 APIMattias Wallin
The interface for the AB3100 is changed to make way for the ABX500 family of chips: AB3550, AB5500 and future ST-Ericsson Analog Baseband chips. The register access functions are moved out to a separate struct abx500_ops. In this way the interface is moved from the implementation and the sub functionality drivers can keep their interface intact when chip infrastructure and communication mechanisms changes. We also define the AB3550 device IDs and the AB3550 platform data struct and convert the catenated 32bit event to an array of 3 x 8bits. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 03:44:30 +0000