summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-11-01iio: chemical: bme680: Add missing regmap.h includeVasileios Amoiridis
Add the linux/regmap.h header since the struct regmap_config is used in this file. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20241021195316.58911-2-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: add support for veml3235Javier Carrasco
The Vishay veml3235 is a low-power ambient light sensor with I2C interface. It provides a minimum detectable intensity of 0.0021 lx/cnt, configurable integration time and gain, and an additional white channel to distinguish between different light sources. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241023-veml3235-v3-2-8490f2622f9a@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5770r: use devm_regulator_get_enable_read_voltage()David Lechner
Simplify the code by using devm_regulator_get_enable_read_voltage(). Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-11-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5761: drop driver remove callbackDavid Lechner
Drop use of the driver remove callback in the ad5761 driver. By making use of a a devm_ helper, we can avoid the need for the remove callback entirely. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-10-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5761: use devm_regulator_get_enable_read_voltage()David Lechner
Simplify the code by using devm_regulator_get_enable_read_voltage(). Error returns are updated to use dev_err_probe(). Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-9-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5624r: drop driver remove callbackDavid Lechner
Drop use of the driver remove callback in the ad5624r_spi driver. By making use of a a devm_ helper, we can avoid the need for the remove callback entirely. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-8-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5624r: use devm_regulator_get_enable_read_voltage()David Lechner
Simplify the code by using devm_regulator_get_enable_read_voltage(). Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-7-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5504: drop driver remove callbackDavid Lechner
Drop use of the driver remove callback in the ad5504 driver. By making use of a a devm_ helper, we can avoid the need for the remove callback entirely. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-6-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5504: use devm_regulator_get_enable_read_voltage()David Lechner
Simplify the code by using devm_regulator_get_enable_read_voltage(). Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-5-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5446: drop driver remove callbacksDavid Lechner
Drop use of the driver remove callbacks in the ad5446 driver. By making use of a a devm_ helper, we can avoid the need for the remove callbacks entirely. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-4-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5446: use devm_regulator_get_enable_read_voltage()David Lechner
Simplify the code by using devm_regulator_get_enable_read_voltage(). Also simplify == NULL check while we are touching that line. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-3-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5380: drop driver remove callbacksDavid Lechner
Drop use of the driver remove callbacks in the ad5380 driver. By making use of a few more devm_ helpers, we can avoid the need for remove callbacks entirely. Also make use of dev_err_probe() while at it. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-2-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: dac: ad5380: use devm_regulator_get_enable_read_voltage()David Lechner
Simplify the code by using devm_regulator_get_enable_read_voltage(). Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-1-d0bd396b3f50@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: gyro: bmg160_core: remove trailing tabJulien Stephan
Remove trailing tab Signed-off-by: Julien Stephan <jstephan@baylibre.com> Link: https://patch.msgid.link/20241023-iio-gyro-bmg160_core-remove-trailing-tab-v1-1-9343c7dc4110@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: stk3310: simplify code in write_event_config callbackJulien Stephan
iio_ev_state_store is actually using kstrtobool to check user input, then gives the converted boolean value to the write_event_config callback. Remove useless code in write_event_config callback. Signed-off-by: Julien Stephan <jstephan@baylibre.com> Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-6-7d29e5a31b00@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: imu: inv_mpu6050: simplify code in write_event_config callbackJulien Stephan
iio_ev_state_store is actually using kstrtobool to check user input, then gives the converted boolean value to the write_event_config callback. Remove useless code in write_event_config callback. Signed-off-by: Julien Stephan <jstephan@baylibre.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-5-7d29e5a31b00@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: veml6030: simplify code in write_event_config callbackJulien Stephan
iio_ev_state_store is actually using kstrtobool to check user input, then gives the converted boolean value to the write_event_config callback. Remove useless code in write_event_config callback. Signed-off-by: Julien Stephan <jstephan@baylibre.com> Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-4-7d29e5a31b00@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: ltr501: simplify code in write_event_config callbackJulien Stephan
iio_ev_state_store is actually using kstrtobool to check user input, then gives the converted boolean value to the write_event_config callback. Remove useless code in write_event_config callback. Signed-off-by: Julien Stephan <jstephan@baylibre.com> Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-3-7d29e5a31b00@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: bh1745: simplify code in write_event_config callbackJulien Stephan
iio_ev_state_store is actually using kstrtobool to check user input, then gives the converted boolean value to the write_event_config callback. Remove useless code in write_event_config callback. Signed-off-by: Julien Stephan <jstephan@baylibre.com> Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-1-7d29e5a31b00@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: ltr501: Replace a variant of iio_get_acpi_device_name_and_data()Andy Shevchenko
IIO core (ACPI part) provides a generic helper that may be used in the driver. Replace a variant of iio_get_acpi_device_name_and_data(). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-25-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: ltr501: Add LTER0303 to the supported devicesAndy Shevchenko
It has been found that the (non-vendor issued) ACPI ID for Lite-On LTR303 is present in Microsoft catalog. Add it to the list of the supported devices. Link: https://www.catalog.update.microsoft.com/Search.aspx?q=lter0303 Closes: https://lore.kernel.org/r/9cdda3e0-d56e-466f-911f-96ffd6f602c8@redhat.com Reported-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-24-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: ltr501: Drop most likely fake ACPI IDsAndy Shevchenko
The commits in question do not proove that ACPI IDs exist. Quite likely it was a cargo cult addition while doing that for DT-based enumeration. Drop most likely fake ACPI IDs. The to be removed IDs has been checked against the following resources: 1) DuckDuckGo 2) Google 3) MS catalog: https://www.catalog.update.microsoft.com/Search.aspx This gives no useful results in regard to DSDT, moreover, the official vendor ID in the registry for Lite-On is LCI. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-23-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: isl29018: drop ACPI_PTR() and CONFIG_ACPI guardsAndy Shevchenko
The complexity of config guards needed for ACPI_PTR() is not worthwhile for the small amount of saved data. This example was doing it correctly but I am proposing dropping this so as to reduce chance of cut and paste where it is done wrong. Also drop now unneeded linux/acpi.h include and added linux/mod_devicetable.h for struct acpi_device_id definition. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-22-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: light: isl29018: Replace a variant of iio_get_acpi_device_name_and_data()Andy Shevchenko
IIO core (ACPI part) provides a generic helper that may be used in the driver. Replace a variant of iio_get_acpi_device_name_and_data(). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-21-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: gyro: bmg160: Replace custom implementation of iio_get_acpi_device_name()Andy Shevchenko
IIO core (ACPI part) provides a generic helper that may be used in the driver. Replace custom implementation of iio_get_acpi_device_name(). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-20-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: accel: mma9553: Replace custom implementation of iio_get_acpi_device_name()Andy Shevchenko
IIO core (ACPI part) provides a generic helper that may be used in the driver. Replace custom implementation of iio_get_acpi_device_name(). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-19-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: accel: mma9551: Replace custom implementation of iio_get_acpi_device_name()Andy Shevchenko
IIO core (ACPI part) provides a generic helper that may be used in the driver. Replace custom implementation of iio_get_acpi_device_name(). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-18-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: accel: kxcjk-1013: drop ACPI_PTR() and move ID out of CONFIG_ACPI guardsAndy Shevchenko
The complexity of config guards needed for ACPI_PTR() is not worthwhile for the small amount of saved data. This example was doing it correctly but I am proposing dropping this so as to reduce chance of cut and paste where it is done wrong. Also added linux/mod_devicetable.h for struct acpi_device_id definition. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-17-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01iio: accel: kxcjk-1013: Replace a variant of iio_get_acpi_device_name_and_data()Andy Shevchenko
IIO core (ACPI part) provides a generic helper that may be used in the driver. Replace a variant of iio_get_acpi_device_name_and_data(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241024191200.229894-16-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01counter: intel-qep: Replace deprecated PCI functionsPhilipp Stanner
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()"). Replace these functions with pcim_iomap_region(). Signed-off-by: Philipp Stanner <pstanner@redhat.com> Link: https://lore.kernel.org/r/20241028091312.17045-2-pstanner@redhat.com Signed-off-by: William Breathitt Gray <wbg@kernel.org>
2024-11-01counter: stm32-timer-cnt: fix device_node handling in probe_encoder()Javier Carrasco
Device nodes accessed via of_get_compatible_child() require of_node_put() to be called when the node is no longer required to avoid leaving a reference to the node behind, leaking the resource. In this case, the usage of 'tnode' is straightforward and there are no error paths, allowing for a single of_node_put() when 'tnode' is no longer required. Cc: stable@vger.kernel.org Fixes: 29646ee33cc3 ("counter: stm32-timer-cnt: add checks on quadrature encoder capability") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20241027-stm32-timer-cnt-of_node_put-v1-1-ebd903cdf7ac@gmail.com Signed-off-by: William Breathitt Gray <wbg@kernel.org>
2024-10-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: - Put the QP netlink dump back in cxgb4, fixes a user visible regression - Don't change the rounding style in mlx5 for user provided rd_atomic values - Resolve a race in bnxt_re around the qp-handle table array * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/bnxt_re: synchronize the qp-handle table array RDMA/bnxt_re: Fix the usage of control path spin locks RDMA/mlx5: Round max_rd_atomic/max_dest_rd_atomic up instead of down RDMA/cxgb4: Dump vendor specific QP details
2024-10-31Merge tag 'net-6.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi, bluetooth and netfilter. No known new regressions outstanding. Current release - regressions: - wifi: mt76: do not increase mcu skb refcount if retry is not supported Current release - new code bugs: - wifi: - rtw88: fix the RX aggregation in USB 3 mode - mac80211: fix memory corruption bug in struct ieee80211_chanctx Previous releases - regressions: - sched: - stop qdisc_tree_reduce_backlog on TC_H_ROOT - sch_api: fix xa_insert() error path in tcf_block_get_ext() - wifi: - revert "wifi: iwlwifi: remove retry loops in start" - cfg80211: clear wdev->cqm_config pointer on free - netfilter: fix potential crash in nf_send_reset6() - ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find() - bluetooth: fix null-ptr-deref in hci_read_supported_codecs - eth: mlxsw: add missing verification before pushing Tx header - eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue Previous releases - always broken: - wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower - netfilter: sanitize offset and length before calling skb_checksum() - core: - fix crash when config small gso_max_size/gso_ipv4_max_size - skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension - mptcp: protect sched with rcu_read_lock - eth: ice: fix crash on probe for DPLL enabled E810 LOM - eth: macsec: fix use-after-free while sending the offloading packet - eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data - eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices - eth: mtk_wed: fix path of MT7988 WO firmware" * tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) net: hns3: fix kernel crash when 1588 is sent on HIP08 devices net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue net: hns3: initialize reset_timer before hclgevf_misc_irq_init() net: hns3: don't auto enable misc vector net: hns3: Resolved the issue that the debugfs query result is inconsistent. net: hns3: fix missing features due to dev->features configuration too early net: hns3: fixed reset failure issues caused by the incorrect reset type net: hns3: add sync command to sync io-pgtable net: hns3: default enable tx bounce buffer when smmu enabled netfilter: nft_payload: sanitize offset and length before calling skb_checksum() net: ethernet: mtk_wed: fix path of MT7988 WO firmware selftests: forwarding: Add IPv6 GRE remote change tests mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address mlxsw: pci: Sync Rx buffers for device mlxsw: pci: Sync Rx buffers for CPU mlxsw: spectrum_ptp: Add missing verification before pushing Tx header net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6() netfilter: Fix use-after-free in get_info() ...
2024-10-31iio: accel: kx022a: Fix raw read formatMatti Vaittinen
The KX022A provides the accelerometer data in two subsequent registers. The registers are laid out so that the value obtained via bulk-read of these registers can be interpreted as signed 16-bit little endian value. The read value is converted to cpu_endianes and stored into 32bit integer. The le16_to_cpu() casts value to unsigned 16-bit value, and when this is assigned to 32-bit integer the resulting value will always be positive. This has not been a problem to users (at least not all users) of the sysfs interface, who know the data format based on the scan info and who have converted the read value back to 16-bit signed value. This isn't compliant with the ABI however. This, however, will be a problem for those who use the in-kernel interfaces, especially the iio_read_channel_processed_scale(). The iio_read_channel_processed_scale() performs multiplications to the returned (always positive) raw value, which will cause strange results when the data from the sensor has been negative. Fix the read_raw format by casting the result of the le_to_cpu() to signed 16-bit value before assigning it to the integer. This will make the negative readings to be correctly reported as negative. This fix will be visible to users by changing values returned via sysfs to appear in correct (negative) format. Reported-by: Kalle Niemi <kaleposti@gmail.com> Fixes: 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Tested-by: Kalle Niemi <kaleposti@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://patch.msgid.link/ZyIxm_zamZfIGrnB@mva-rohm Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-31iio: gts: fix infinite loop for gain_to_scaletables()Zicheng Qu
In iio_gts_build_avail_time_table(), it is checked that gts->num_itime is non-zero, but gts->num_itime is not checked in gain_to_scaletables(). The variable time_idx is initialized as gts->num_itime - 1. This implies that time_idx might initially be set to -1 (0 - 1 = -1). Consequently, using while (time_idx--) could lead to an infinite loop. Cc: stable@vger.kernel.org # v6.6+ Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers") Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20241031014626.2313077-1-quzicheng@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-31iio: gts: Fix uninitialized symbol 'ret'Zicheng Qu
Initialize the variable ret at the time of declaration to prevent it from being returned without a defined value. Fixes smatch warning: drivers/iio/industrialio-gts-helper.c:256 gain_to_scaletables() error: uninitialized symbol 'ret'. Cc: stable@vger.kernel.org # v6.6+ Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers") Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20241031014505.2313035-1-quzicheng@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-31iio: adc: ad4000: fix reading unsigned dataDavid Lechner
Fix reading unsigned data from the AD4000 ADC via the _raw sysfs attribute by ensuring that *val is set before returning from ad4000_single_conversion(). This was not being set in any code path and was causing the attribute to return a random value. Fixes: 938fd562b974 ("iio: adc: Add support for AD4000") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241030-iio-adc-ad4000-fix-reading-unsigned-data-v1-1-2e28dd75fe29@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01Merge tag 'mediatek-drm-fixes-20241028' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes - 20241028 1. Fix degradation problem of alpha blending 2. Fix color format MACROs in OVL 3. Fix get efuse issue for MT8188 DPTX 4. Fix potential NULL dereference in mtk_crtc_destroy() 5. Correct dpi power-domains property 6. Add split subschema property constraints Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241028135846.3570-1-chunkuang.hu@kernel.org
2024-11-01Merge tag 'amd-drm-fixes-6.12-2024-10-31' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.12-2024-10-31: amdgpu: - DCN 3.5 fix - Vangogh SMU KASAN fix - SMU 13 profile reporting fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241031151539.3523633-1-alexander.deucher@amd.com
2024-10-31ad7780: fix division by zero in ad7780_write_raw()Zicheng Qu
In the ad7780_write_raw() , val2 can be zero, which might lead to a division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw() is based on iio_info's write_raw. While val is explicitly declared that can be zero (in read mode), val2 is not specified to be non-zero. Fixes: 9085daa4abcc ("staging: iio: ad7780: add gain & filter gpio support") Cc: stable@vger.kernel.org Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Link: https://patch.msgid.link/20241028142027.1032332-1-quzicheng@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-31iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xferNuno Sa
The AD7923 was updated to support devices with 8 channels, but the size of tx_buf and ring_xfer was not increased accordingly, leading to a potential buffer overflow in ad7923_update_scan_mode(). Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928") Cc: stable@vger.kernel.org Signed-off-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Link: https://patch.msgid.link/20241029134637.2261336-1-quzicheng@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-01Merge tag 'drm-misc-fixes-2024-10-31' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: ivpu: - Fix firewall IRQ handling panthor: - Fix firmware initialization wrt page sizes - Fix handling and reporting of dead job groups sched: - Guarantee forward progress via WC_MEM_RECLAIM tests: - Fix memory leak in drm_display_mode_from_cea_vic() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241031144348.GA7826@linux-2.fritz.box
2024-10-31gpiolib: fix debugfs dangling chip separatorJohan Hovold
Add the missing newline after entries for recently removed gpio chips so that the chip sections are separated by a newline as intended. Fixes: e348544f7994 ("gpio: protect the list of GPIO devices with SRCU") Cc: stable@vger.kernel.org # 6.9 Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241028125000.24051-3-johan+linaro@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-10-31gpiolib: fix debugfs newline separatorsJohan Hovold
The gpiolib debugfs interface exports a list of all gpio chips in a system and the state of their pins. The gpio chip sections are supposed to be separated by a newline character, but a long-standing bug prevents the separator from being included when output is generated in multiple sessions, making the output inconsistent and hard to read. Make sure to only suppress the newline separator at the beginning of the file as intended. Fixes: f9c4a31f6150 ("gpiolib: Use seq_file's iterator interface") Cc: stable@vger.kernel.org # 3.7 Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241028125000.24051-2-johan+linaro@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-10-31drm/xe: Don't short circuit TDR on jobs not startedMatthew Brost
Short circuiting TDR on jobs not started is an optimization which is not required. On LNL we are facing an issue where jobs do not get scheduled by the GuC if it misses a GGTT page update. When this occurs let the TDR fire, toggle the scheduling which may get the job unstuck, and print a warning message. If the TDR fires twice on job that hasn't started, timeout the job. v2: - Add warning message (Paulo) - Add fixes tag (Paulo) - Timeout job which hasn't started after TDR firing twice v3: - Include local change v4: - Short circuit check_timeout on job not started - use warn level rather than notice (Paulo) Fixes: 7ddb9403dd74 ("drm/xe: Sample ctx timestamp to determine if jobs have timed out") Cc: stable@vger.kernel.org Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025214330.2010521-2-matthew.brost@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 35d25a4a0012e690ef0cc4c5440231176db595cc) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-31drm/xe: Add mmio read before GGTT invalidateMatthew Brost
On LNL without a mmio read before a GGTT invalidate the GuC can incorrectly read the GGTT scratch page upon next access leading to jobs not getting scheduled. A mmio read before a GGTT invalidate seems to fix this. Since a GGTT invalidate is not a hot code path, blindly do a mmio read before each GGTT invalidate. Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: stable@vger.kernel.org Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3164 Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023221200.1797832-1-matthew.brost@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 5a710196883e0ac019ac6df2a6d79c16ad3c32fa) [ Fix conflict with mmio vs gt argument ] Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-31gpio: sloppy-logic-analyzer: Check for error code from devm_mutex_init() callAndy Shevchenko
Even if it's not critical, the avoidance of checking the error code from devm_mutex_init() call today diminishes the point of using devm variant of it. Tomorrow it may even leak something. Add the missed check. Fixes: 7828b7bbbf20 ("gpio: add sloppy logic analyzer using polling") Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241030174132.2113286-3-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-10-31gpio: fix uninit-value in swnode_find_gpioSuraj Sonawane
Fix an issue detected by the Smatch tool: drivers/gpio/gpiolib-swnode.c:78 swnode_find_gpio() error: uninitialized symbol 'ret'. The issue occurs because the 'ret' variable may be used without initialization if the for_each_gpio_property_name loop does not run. This could lead to returning an undefined value, causing unpredictable behavior. Initialize 'ret' to 0 before the loop to ensure the function returns an error code if no properties are parsed, maintaining proper error handling. Fixes: 9e4c6c1ad ("Merge tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux") Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com> Link: https://lore.kernel.org/r/20241026090642.28633-1-surajsonawane0215@gmail.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-10-31net: hns3: fix kernel crash when 1588 is sent on HIP08 devicesJie Wang
Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issueHao Lan
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 01:22:49 +0000