| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix auto-detect regression in jc42 driver"
* tag 'hwmon-for-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
[PATCH} hwmon: (jc42) Properly detect TSE2004-compliant devices again
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, msm and xe are the two main ones, with a bunch of
scattered fixes including a largish revert in mgag200, then amdgpu,
vmwgfx and scattering of other minor ones.
All seems pretty regular.
msm:
- Display:
- move CRTC resource assignment to atomic_check otherwise to make
consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
this leads to false timeouts
- GPU:
- a7xx: add a fence wait before SMMU table update
xe:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew
Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes
amdkfd:
- VRAM usage reporting fix
radeon:
- Fix possible_clones handling
i915:
- Two DP bandwidth related MST fixes
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()"
* tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel: (45 commits)
drm/ast: vga: Clear EDID if no display is connected
drm/ast: sil164: Clear EDID if no display is connected
Revert "drm/mgag200: Add vblank support"
drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs
drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
drm/xe/bmg: improve cache flushing behaviour
drm/xe/xe_sync: initialise ufence.signalled
drm/xe/ufence: ufence can be signaled right after wait_woken
drm/xe: Use bookkeep slots for external BO's in exec IOCTL
drm/xe/query: Increase timestamp width
drm/xe: Don't free job in TDR
drm/xe: Take job list lock in xe_sched_add_pending_job
drm/xe: fix unbalanced rpm put() with declare_wedged()
drm/xe: fix unbalanced rpm put() with fence_fini()
drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg
drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
drm/msm/a6xx+: Insert a fence wait before SMMU table update
drm/msm/dpu: don't always program merge_3d block
drm/msm/dpu: Don't always set merge_3d pending flush
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.12
Pull MD fixes from Song.
* tag 'md-6.12-20241018' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
|
|
Merge amd-pstate driver fixes for 6.12-rc4:
- Enable ACPI CPPC in amd_pstate_register_driver() after disabling
it in amd_pstate_unregister_driver() during driver operation mode
switch (Dhananjay Ugwekar).
- Make amd-pstate use nominal performance as the maximum performance
level when boost is disabled (Mario Limonciello).
* pm-cpufreq:
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes from Will Deacon:
- Clarify warning message when failing to disable the MMU-500
prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index
when 32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
Intel VT-d fix from Lu Baolu:
- Fix incorrect pci_for_each_dma_alias() for non-PCI devices"
* tag 'iommu-fixes-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
iommu/arm-smmu-v3: Convert comma to semicolon
iommu/arm-smmu-v3: Fix last_sid_idx calculation for sid_bits==32
iommu/arm-smmu: Clarify MMU-500 CPRE workaround
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix PCI error recovery by handling error events correctly
- Fix CCA crypto card behavior within protected execution environment
- Two KVM commits which fix virtual vs physical address handling bugs
in KVM pfault handling
- Fix return code handling in pckmo_key2protkey()
- Deactivate sclp console as late as possible so that outstanding
messages appear on the console instead of being dropped on reboot
- Convert newlines to CRLF instead of LFCR for the sclp vt220 driver,
as required by the vt220 specification
- Initialize also psw mask in perf_arch_fetch_caller_regs() to make
sure that user_mode(regs) will return false
- Update defconfigs
* tag 's390-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Update defconfigs
s390: Initialize psw mask in perf_arch_fetch_caller_regs()
s390/sclp_vt220: Convert newlines to CRLF instead of LFCR
s390/sclp: Deactivate sclp after all its users
s390/pkey_pckmo: Return with success for valid protected key types
KVM: s390: Change virtual to physical address access in diag 0x258 handler
KVM: s390: gaccess: Check if guest address is in memslot
s390/ap: Fix CCA crypto card behavior within protected execution environment
s390/pci: Handle PCI error codes other than 0x3a
|
|
This driver has only ever been used by the omap4-panda board file. This
file has been gone for over 10 years. Let it go.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241016094117.16654-1-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kernel test robot reported a build error on csky:
drivers/misc/keba/cp500.c:287:(.text+0x1c0): undefined reference to `i2c_verify_client'
Add I2C dependency to fix build error.
Fixes: 794848300103 ("misc: keba: Add SPI controller device")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410130817.NXBCxx4q-lkp@intel.com/
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241016182751.10457-1-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rts5228, rts5261, rts5264 are supported by the rtsx_pci driver, but
they are not mentioned in the Kconfig help when the code was added.
List those models in the Kconfig help accordingly.
Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com>
Link: https://lore.kernel.org/r/20241017144747.15966-1-0xff07@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Thinkpad X1 Tablet Gen 3 keyboard has the same Lenovo specific quirks
as the original Thinkpad X1 Tablet keyboard.
Add the PID for the "Thinkpad X1 Tablet Gen 3 keyboard" to the hid-lenovo
driver to fix the FnLock, Mute and media buttons not working.
Suggested-by: Izhar Firdaus <izhar@fedoraproject.org>
Closes https://bugzilla.redhat.com/show_bug.cgi?id=2315395
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops.
After resume from suspend, one can communicate with this device just fine.
We can read data from it or request a reset,
but for some reason the interrupt line will not go up
when new events are available.
(it can correctly respond to a reset with an interrupt tho)
The only way I found to wake this device up
is to send anything to it after ~1.5s mark,
for example a simple read request, or power mode change.
In this patch, I simply delay the resume steps with msleep,
this will cause the set_power request to happen after
the ~1.5s barrier causing the device to resume its event interrupts.
Sleep was used rather than delayed_work
to make this workaround as non-invasive as possible.
[jkosina@suse.com: shortlog update]
Signed-off-by: Bartłomiej Maryńczak <marynczakbartlomiej@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.12-rc4
Here are some new modem device ids.
Everything has been in linux-next over night with no reported issues.
* tag 'usb-serial-6.12-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
|
|
Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition, that
dependency causes xen-privcmd can't be loaded on domU, because dependent
xen-pciback isn't always be loaded successfully on domU.
To solve above problem, remove that dependency, and do not call
pcistub_get_gsi_from_sbdf() directly, instead add a hook in
drivers/xen/apci.c, xen-pciback register the real call function, then in
privcmd_ioctl_pcidev_get_gsi call that hook.
Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241012084537.1543059-1-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/jkldrex5733ldxrla75b4ayvhujjhw2kccmasl5rotoufoacj4@pkvlrrv4orc7
|
|
The barrier_nospec() after the array bounds check is overkill and
painfully slow for arches which implement it.
Furthermore, most arches don't implement it, so they remain exposed to
Spectre v1 (which can affect pretty much any CPU with branch
prediction).
Instead, clamp the user pointer to a valid range so it's guaranteed to
be a valid array index even when the bounds check mispredicts.
Fixes: 8270cb10c068 ("cdrom: Fix spectre-v1 gadget")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1d86f4d9d8fba68e5ca64cdeac2451b95a8bf872.1729202937.git.jpoimboe@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two clk driver fixes and a unit test fix:
- Terminate the of_device_id table in the Samsung exynosautov920 clk
driver so that device matching logic doesn't run off the end of the
array into other memory and break matching for any kernel with this
driver loaded
- Properly limit the max clk ID in the Rockchip clk driver
- Use clk kunit helpers in the clk tests so that memory isn't leaked
after the test concludes"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: test: Fix some memory leaks
clk: rockchip: fix finding of maximum clock ID
clk: samsung: Fix out-of-bound access of of_match_node()
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017115516.GA196624@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Two DP bandwidth related MST fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZxDLdML9Dwqkb1AW@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-10-16:
amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes
amdkfd:
- VRAM usage reporting fix
radeon:
- Fix possible_clones handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016200514.3520286-1-alexander.deucher@amd.com
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.12
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)"
* tag 'nvme-6.12-2024-10-18' of git://git.infradead.org/nvme:
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
nvme-multipath: defer partition scanning
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
|
|
In raid10_run() if raid10_set_queue_limits() succeed, the return value
is set to zero, and if following procedures failed raid10_run() will
return zero while mddev->private is still NULL, causing null ptr
dereference in raid10_size().
Fix the problem by only overwrite the return value if
raid10_set_queue_limits() failed.
Fixes: 3d8466ba68d4 ("md/raid10: use the atomic queue limit update APIs")
Cc: stable@vger.kernel.org
Reported-and-tested-by: ValdikSS <iam@valdikss.org.ru>
Closes: https://lore.kernel.org/all/0dd96820-fe52-4841-bc58-dbf14d6bfcc8@valdikss.org.ru/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241009014914.1682037-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
When a flush is issued to an RAID array, a child flush IO is created and
issued for each member disk in the RAID array. Since commit b75197e86e6d
("md: Remove flush handling"), each child flush IO has been chained with
the original bio. As a result, the failure of any child IO could modify
the bi_status of the original bio, potentially impacting the upper-layer
filesystem.
Fix the issue by preventing child flush IO from altering the original
bio->bi_status as before. However, this design introduces a known
issue: in the event of a power failure, if a flush IO on a member
disk fails, the upper layers may not be informed. This issue is not easy
to fix and will not be addressed for the time being in this issue.
Fixes: b75197e86e6d ("md: Remove flush handling")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240919063048.2887579-1-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.
This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The header files linux/module.h is included twice in bmi270_i2c.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11363
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://patch.msgid.link/20241016003919.113306-1-yang.lee@linux.alibaba.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Empty file unintentionally included in commit. Drop it.
Fixes: 94aab7a0f5c7 ("iio: adc: ad7606: rework available attributes for SW channels")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c731 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Most of the fixes this time are for platform specific drivers,
addressing issues found through build testing on freescale, ep93xx,
starfive, and npcm platforms, as as well as the ffa firmware.
The fixes for the scmi firmware driver address compatibility problems
found on broadcom machines.
There are only two devicetree fixes, addressing incorrect in
configuration on broadcom and marvell machines.
The changes to the Documentation and MAINTAINERS files are for
clarification only"
* tag 'arm-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: arm_ffa: Avoid string-fortify warning caused by memcpy()
firmware: arm_scmi: Queue in scmi layer for mailbox implementation
firmware: arm_ffa: Avoid string-fortify warning in export_uuid()
firmware: arm_scmi: Give SMC transport precedence over mailbox
firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup()
Documentation/process: maintainer-soc: clarify submitting patches
dmaengine: cirrus: check that output may be truncated
dmaengine: cirrus: ERR_CAST() ioremap error
MAINTAINERS: use the canonical soc mailing list address and mark it as L:
ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin
arm64: dts: marvell: cn9130-sr-som: fix cp0 mdio pin numbers
soc: fsl: cpm1: qmc: Fix unused data compilation warning
soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers
reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC
reset: npcm: convert comma to semicolon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
|
|
Ensure CONFIG_PHY_ROCKCHIP_SAMSUNG_HDPTX depends on CONFIG_COMMON_CLK to
fix the following link errors when compile testing some random kernel
configurations:
m68k-linux-ld: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.o: in function `rk_hdptx_phy_clk_register':
drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:1031:(.text+0x470): undefined reference to `__clk_get_name'
m68k-linux-ld: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:1036:(.text+0x4ba): undefined reference to `devm_clk_hw_register'
m68k-linux-ld: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:1040:(.text+0x4d2): undefined reference to `of_clk_hw_simple_get'
m68k-linux-ld: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:1040:(.text+0x4da): undefined reference to `devm_of_clk_add_hw_provider'
Fixes: c4b09c562086 ("phy: phy-rockchip-samsung-hdptx: Add clock provider support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409180305.53PXymZn-lkp@intel.com/
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240923-sam-hdptx-link-fix-v1-1-8d10d7456305@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in
wiz driver") added support for USXGMII mode. In doing so, P0_REFCLK_SEL
was set to "pcs_mac_clk_divx1_ln_0" (0x3) and P0_STANDARD_MODE was set to
LANE_MODE_GEN1, which results in a data rate of 5.15625 Gbps. However,
since the USXGMII mode can support up to 10.3125 Gbps data rate, the
aforementioned fields should be set to "pcs_mac_clk_divx0_ln_0" (0x2) and
LANE_MODE_GEN2 respectively. The signal corresponding to the USXGMII lane
of the SERDES has been measured as 5 Gbps without the change and 10 Gbps
with the change. Hence, fix the configuration accordingly to support
USXGMII up to 10G.
Fixes: b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241012053937.3596885-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In order to connect the USB 2.0 PHY to its controller, we also need to
set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot
versions did that, but upstream firmware does not, and the kernel must
not rely on such behavior anyway. Failing to set this left the USB
gadget port invisible to connected hosts behind.
Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1]
Fixes: 16d3a71c20cf ("phy: starfive: Add JH7110 USB 2.0 PHY driver")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241015070444.20972-2-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The PCIe PHYs on x1e80100 do not a have a qref supply so stop requesting
one. This also avoids the follow warning at boot:
qcom-qmp-pcie-phy 1bfc000.phy: supply vdda-qref not found, using dummy regulator
Fixes: 9dab00ee9544 ("phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100")
Fixes: 606060ce8fd0 ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE")
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241015121406.15033-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the following Telit FN920C04 compositions:
0x10a2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a2 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a7: MBIM + tty (AT) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a7 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10aa: MBIM + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 15 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10aa Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add Quectel EM916Q-GL with product ID 0x6007
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=6007 Rev= 2.00
S: Manufacturer=Quectel
S: Product=EG916Q-GL
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA
A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=88(I) Atr=03(Int.) MxPS= 32 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
MI_00 Quectel USB Diag Port
MI_01 Quectel USB NMEA Port
MI_02 Quectel USB AT Port
MI_03 Quectel USB Modem Port
MI_04 Quectel USB Net Port
Signed-off-by: Benjamin B. Frost <benjamin@geanix.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.12-rc4
Fix two instances of memory leaks, one in ath10k and one in ath11k.
|
|
This ID appears to be RTL8188SU, not RTL8192DU. This is the wrong driver
for RTL8188SU. The r8712u driver from staging handles this ID.
I think this ID comes from the original rtl8192du driver from Realtek.
I don't know if they added it by mistake, or it was actually used for
two different chips.
RTL8188SU with this ID exists in the wild. RTL8192DU with this ID
probably doesn't.
Fixes: b5dc8873b6ff ("wifi: rtlwifi: Add rtl8192du/sw.c")
Cc: stable@vger.kernel.org # v6.11
Closes: https://github.com/lwfinger/rtl8192du/issues/105
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/40245564-41fe-4a5e-881f-cd517255b20a@gmail.com
|
|
RTL8822CU, RTL8822BU, and RTL8821CU don't need BIT_EN_PRE_CALC.
In fact, RTL8822BU in USB 3 mode doesn't pass all the frames to the
driver, resulting in much lower download speed than normal:
$ iperf3 -c 192.168.0.1 -R
Connecting to host 192.168.0.1, port 5201
Reverse mode, remote host 192.168.0.1 is sending
[ 5] local 192.168.0.50 port 43062 connected to 192.168.0.1 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 26.9 MBytes 225 Mbits/sec
[ 5] 1.00-2.00 sec 7.50 MBytes 62.9 Mbits/sec
[ 5] 2.00-3.00 sec 8.50 MBytes 71.3 Mbits/sec
[ 5] 3.00-4.00 sec 8.38 MBytes 70.3 Mbits/sec
[ 5] 4.00-5.00 sec 7.75 MBytes 65.0 Mbits/sec
[ 5] 5.00-6.00 sec 8.00 MBytes 67.1 Mbits/sec
[ 5] 6.00-7.00 sec 8.00 MBytes 67.1 Mbits/sec
[ 5] 7.00-8.00 sec 7.75 MBytes 65.0 Mbits/sec
[ 5] 8.00-9.00 sec 7.88 MBytes 66.1 Mbits/sec
[ 5] 9.00-10.00 sec 7.88 MBytes 66.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.02 sec 102 MBytes 85.1 Mbits/sec 224 sender
[ 5] 0.00-10.00 sec 98.6 MBytes 82.7 Mbits/sec receiver
Don't set BIT_EN_PRE_CALC. Then the speed is much better:
% iperf3 -c 192.168.0.1 -R
Connecting to host 192.168.0.1, port 5201
Reverse mode, remote host 192.168.0.1 is sending
[ 5] local 192.168.0.50 port 39000 connected to 192.168.0.1 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 52.8 MBytes 442 Mbits/sec
[ 5] 1.00-2.00 sec 71.9 MBytes 603 Mbits/sec
[ 5] 2.00-3.00 sec 74.8 MBytes 627 Mbits/sec
[ 5] 3.00-4.00 sec 75.9 MBytes 636 Mbits/sec
[ 5] 4.00-5.00 sec 76.0 MBytes 638 Mbits/sec
[ 5] 5.00-6.00 sec 74.1 MBytes 622 Mbits/sec
[ 5] 6.00-7.00 sec 74.0 MBytes 621 Mbits/sec
[ 5] 7.00-8.00 sec 76.0 MBytes 638 Mbits/sec
[ 5] 8.00-9.00 sec 74.4 MBytes 624 Mbits/sec
[ 5] 9.00-10.00 sec 63.9 MBytes 536 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 717 MBytes 601 Mbits/sec 24 sender
[ 5] 0.00-10.00 sec 714 MBytes 599 Mbits/sec receiver
Fixes: 002a5db9a52a ("wifi: rtw88: Enable USB RX aggregation for 8822c/8822b/8821c")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/afb94a82-3d18-459e-97fc-1a217608cdf0@gmail.com
|
|
When tracing is disabled, there is no point in asking the user about
enabling Broadcom wireless device tracing.
Fixes: f5c4f10852d42012 ("brcm80211: Allow trace support to be enabled separately from debug")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/81a29b15eaacc1ac1fb421bdace9ac0c3385f40f.1727179742.git.geert@linux-m68k.org
|
|
The early chips including RTL8852A, RTL8851B, RTL8852B and RTL8852BT have
interoperability problems of 36-bit DMA with some PCI hosts. Rollback
to 32-bit DMA by default, and only enable 36-bit DMA for tested platforms.
Since all Intel platforms we have can work correctly, add the vendor ID to
white list. Otherwise, list vendor/device ID of bridge we have tested.
Fixes: 1fd4b3fe52ef ("wifi: rtw89: pci: support 36-bit PCI DMA address")
Reported-by: Marcel Weißenbach <mweissenbach@ignaz.org>
Closes: https://lore.kernel.org/linux-wireless/20240918073237.Horde.VLueh0_KaiDw-9asEEcdM84@ignaz.org/T/#m07c5694df1acb173a42e1a0bab7ac22bd231a2b8
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Marcel Weißenbach <mweissenbach@ignaz.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240924021633.19861-1-pkshih@realtek.com
|
|
Commit 44aff8e31080 ("phy: qcom-qmp-combo: clean up probe
initialisation") removed most users of the platform device driver data,
but mistakenly also removed the initialisation despite the data still
being used in the runtime PM callbacks.
The initialisation was soon after restored by commit 83a0bbe39b17 ("phy:
qcom-qmp-combo: add support for updated sc8280xp binding") but now
happens slightly later during probe. This should not cause any trouble
currently as runtime PM needs to be enabled manually through sysfs and
the platform device would not be suspended before the PHY has been
registered anyway.
Move the driver data initialisation to avoid a NULL-pointer dereference
on runtime suspend if runtime PM is ever enabled by default in this
driver.
Fixes: 44aff8e31080 ("phy: qcom-qmp-combo: clean up probe initialisation")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240911115253.10920-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data from the
qcom-qmp-usb driver, but mistakenly also removed the initialisation
despite the data still being used in the runtime PM callbacks. This bug
was later reproduced when the driver was copied to create the qmp-usbc
driver.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with these drivers.
Fixes: 19281571a4d5 ("phy: qcom: qmp-usb: split USB-C PHY driver")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240911115253.10920-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data from the
qcom-qmp-usb driver, but mistakenly also removed the initialisation
despite the data still being used in the runtime PM callbacks. This bug
was later reproduced when the driver was copied to create the
qmp-usb-legacy driver.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with these drivers.
Fixes: e464a3180a43 ("phy: qcom-qmp-usb: split off the legacy USB+dp_com support")
Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240911115253.10920-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data, but mistakenly
also removed the initialisation despite the data still being used in the
runtime PM callbacks.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with this driver.
Fixes: 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240911115253.10920-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In the case of a prepare callback after an xrun or when the PCM is
restarted after a call to snd_pcm_drain/snd_pcm_drop, avoid
reprogramming the SHIM registers but send the PDI stream number so that
the link DMA data can be set. This is needed for the case that the DMA
data is cleared when the PCM is stopped and restarted without being
closed.
Link: https://github.com/thesofproject/sof/issues/9502
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
All: stable@vger.kernel.org # 6.10.x 6.11.x
Link: https://patch.msgid.link/20241016032910.14601-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When profile rollback fails in mlx5e_netdev_change_profile, the netdev
profile var is left set to NULL. Avoid a crash when unloading the driver
by not calling profile->cleanup in such a case.
This was encountered while testing, with the original trigger that
the wq rescuer thread creation got interrupted (presumably due to
Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by
mlx5e_priv_init, the profile rollback also fails for the same reason
(signal still active) so the profile is left as NULL, leading to a crash
later in _mlx5e_remove.
[ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)
[ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12
[ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
[ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 745.538222] #PF: supervisor read access in kernel mode
<snipped>
[ 745.551290] Call Trace:
[ 745.551590] <TASK>
[ 745.551866] ? __die+0x20/0x60
[ 745.552218] ? page_fault_oops+0x150/0x400
[ 745.555307] ? exc_page_fault+0x79/0x240
[ 745.555729] ? asm_exc_page_fault+0x22/0x30
[ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]
[ 745.556698] auxiliary_bus_remove+0x18/0x30
[ 745.557134] device_release_driver_internal+0x1df/0x240
[ 745.557654] bus_remove_device+0xd7/0x140
[ 745.558075] device_del+0x15b/0x3c0
[ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]
[ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]
[ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]
[ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]
[ 745.560694] pci_device_remove+0x39/0xa0
[ 745.561112] device_release_driver_internal+0x1df/0x240
[ 745.561631] driver_detach+0x47/0x90
[ 745.562022] bus_remove_driver+0x84/0x100
[ 745.562444] pci_unregister_driver+0x3b/0x90
[ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]
[ 745.563415] __x64_sys_delete_module+0x14d/0x2f0
[ 745.563886] ? kmem_cache_free+0x1b0/0x460
[ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190
[ 745.564825] do_syscall_64+0x6d/0x140
[ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 745.565725] RIP: 0033:0x7f1579b1288b
Fixes: 3ef14e463f6e ("net/mlx5e: Separate between netdev objects and mlx5e profiles initialization")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It otherwise remains registered and a subsequent attempt at eswitch
enabling might trigger warnings of the sort:
[ 682.589148] ------------[ cut here ]------------
[ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered
[ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90
[...snipped]
[ 682.610052] Call Trace:
[ 682.610369] <TASK>
[ 682.610663] ? __warn+0x7c/0x110
[ 682.611050] ? notifier_chain_register+0x3e/0x90
[ 682.611556] ? report_bug+0x148/0x170
[ 682.611977] ? handle_bug+0x36/0x70
[ 682.612384] ? exc_invalid_op+0x13/0x60
[ 682.612817] ? asm_exc_invalid_op+0x16/0x20
[ 682.613284] ? notifier_chain_register+0x3e/0x90
[ 682.613789] atomic_notifier_chain_register+0x25/0x40
[ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core]
[ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core]
[ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core]
[ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core]
[ 682.616789] sriov_numvfs_store+0xb0/0x1b0
[ 682.617248] kernfs_fop_write_iter+0x117/0x1a0
[ 682.617734] vfs_write+0x231/0x3f0
[ 682.618138] ksys_write+0x63/0xe0
[ 682.618536] do_syscall_64+0x4c/0x100
[ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 7624e58a8b3a ("net/mlx5: E-switch, register event handler before arming the event")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
