summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-09-19clk: Drop !clk checks in debugfs dumpingStephen Boyd
These recursive functions have checks for !clk being passed in, but the callers are always looping through lists and therefore the pointers can't be NULL. Drop the checks to simplify the code. Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190826234729.145593-1-sboyd@kernel.org
2019-09-19Merge tag 'pinctrl-v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.4 kernel cycle: Core changes: - Fix errors in example code in the documentation. New drivers: - Add support for JZ4760, JZ4760B, X1000, X1000E and X1500 to the Ingenic driver. - Support Cirrus Logic Madera CS47L92 and CS47L15. - Support Allwinner Sunxi V3S. - Support Aspeed 2600 BMC. - Support Qualcomm SC7180. - Support Marvell MVEBU CS115. Driver improvements: - Clean up a few drivers to use the devm_platform_ioremap_resource() helper. - Pass the irqchip when registering the gpio_chip in some pin controllers that are also GPIO controllers. - Support suspend/resume in the Tegra driver. - Support pull-up on the Broadcom BCM2711. - The Intel driver can now request locked pads. - Fix the UFS reset pin in the Qualcomm SDM845 driver" * tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits) pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux() pinctrl: bcm: remove redundant assignment to pointer log pinctrl: iproc: Add 'get_direction' support pinctrl: iproc-gpio: Handle interrupts for multiple instances pinctrl: iproc-gpio: Fix incorrect pinconf configurations pinctrl: intel: mark intel_pin_to_gpio __maybe_unused pinctrl: qcom: sdm845: Fix UFS_RESET pin pinctrl: mvebu: add additional variant for standalone CP115 pinctrl: mvebu: Add CP110 missing pin functionality dt-bindings: cp110: document the new CP115 pinctrl compatible pinctrl: bcm2835: Pass irqchip when adding gpiochip pinctrl: meson: meson: Add of_node_put() before return pinctrl/gpio: Take MUX usage into account dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support pinctrl: amd: disable spurious-firing GPIO IRQs pinctrl: rza2: Include the appropriate headers pinctrl: rza2: Drop driver use of consumer flags ...
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - input core allows hardware drivers to specify a [more precise] timestamp (normally taken in top half) to better track velocity of contacts - input_dev instances now support "polling" mode so that drivers could use the same object for polled and interrupt-driven operation. The plan is to convert existing drivers and retire input_polled_dev API - a new driver for the FlySky FS-iA6B RC receiver - a refresh of BU21013 touchpad driver - w90x900 keyboard and touchpad drivers are removed as the platform is gone - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: sidewinder - make array seq static const, makes object smaller Input: reset device timestamp on sync Input: bu21013_ts - switch to using standard touchscreen properties Input: bu21013_ts - switch to using MT-B (slotted) protocol Input: bu21013_ts - fix suspend when wake source Input: bu21013_ts - use interrupt from I2C client Input: bu21013_ts - remove support for platform data Input: bu21013_ts - convert to using managed resources Input: bu21013_ts - remove useless comments Input: bu21013_ts - annotate supend/resume methods as __maybe_unused Input: bu21013_ts - rename some variables Input: bu21013_ts - convert to use GPIO descriptors ARM: ux500: improve BU21013 touchpad bindings Input: i8042 - enable wakeup on a stable struct device Input: soc_button_array - use platform_device_register_resndata() Input: psmouse - drop all unneeded functions from mouse headers Input: add support for polling to input devices Input: wacom_w8001 - allocate additional space for 'phys' Input: cros_ec_keyb - add back missing mask for event_type Input: remove dev_err() usage after platform_get_irq() ...
2019-09-19Merge tag 'for-linus-5.4-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "A few minor fixes and some cosmetic changes. Nothing big here, but some minor things that people have found and some minor reworks for names and include files" * tag 'for-linus-5.4-1' of git://github.com/cminyard/linux-ipmi: ipmi_si_intf: Fix race in timer shutdown handling ipmi: move message error checking to avoid deadlock ipmi_ssif: avoid registering duplicate ssif interface ipmi: Free receive messages when in an oops ipmi_si: Only schedule continuously in the thread in maintenance mode ipmi_si: Remove ipmi_ from the device attr names ipmi_si: Convert device attr permissions to octal ipmi_si: Rework some include files ipmi_si: Convert timespec64 to timespec
2019-09-19Merge tag 'mailbox-v5.4' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - qcom: - enable support for ipq8074, sm1850 and sm7180 - add child device node for qcs404 - misc fixes - mediatek: - enable support for mt8183 - misc rejig of cmdq driver - new client-reg dt property - armada: - use device-managed registration api * tag 'mailbox-v5.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom-apcs: fix max_register value mailbox: qcom: Add support for IPQ8074 APCS dt-bindings: mailbox: qom: Add ipq8074 APPS compatible mailbox: qcom: Add support for Qualcomm SM8150 and SC7180 SoCs dt-bindings: mailbox: Add APSS shared for SM8150 and SC7180 SoCs mbox: qcom: replace integer with valid macro mbox: qcom: add APCS child device for QCS404 mailbox: mediatek: cmdq: clear the event in cmdq initial flow mailbox: mediatek: cmdq: support mt8183 gce function mailbox: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data dt-binding: gce: add binding for gce client reg property dt-binding: gce: add gce header file for mt8183 dt-binding: gce: remove thread-num property mailbox: armada-37xx-rwtm: Use device-managed registration API
2019-09-19Merge tag 'devicetree-for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - a bunch of DT binding conversions to DT schema format - clean-ups of the Arm idle-states binding - support a default number of cells in of_for_each_phandle() when the cells name is missing - expose dtbs_check and dt_binding_check in the make help - convert writting-schema.md to ReST - HiSilicon reset controller binding updates - add documentation for MT8516 RNG * tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits) of: restore old handling of cells_name=NULL in of_*_phandle_with_args() bus: qcom: fix spelling mistake "ambigous" -> "ambiguous" of: Let of_for_each_phandle fallback to non-negative cell_count iommu: pass cell_count = -1 to of_for_each_phandle with cells_name dt-bindings: arm: Convert Realtek board/soc bindings to json-schema dt-bindings: arm: Convert Actions Semi bindings to jsonschema dt-bindings: Correct spelling in example schema dt-bindings: cpu: Add a support cpu type for cortex-a55 dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible dt-bindings: arm: idle-states: Move exit-latency-us explanation dt-bindings: arm: idle-states: Add punctuation to improve readability dt-bindings: arm: idle-states: Correct "constraint guarantees" dt-bindings: arm: idle-states: Correct references to wake-up delay dt-bindings: arm: idle-states: Use "e.g." and "i.e." consistently pinctrl-mcp23s08: Fix property-name in dt-example dt-bindings: Clarify interrupts-extended usage dt-bindings: Convert Arm Mali Utgard GPU to DT schema dt-bindings: Convert Arm Mali Bifrost GPU to DT schema dt-bindings: Convert Arm Mali Midgard GPU to DT schema dt-bindings: irq: Convert Allwinner NMI Controller to a schema ...
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-19iwlwifi: mvm: fix build w/o CONFIG_THERMALJohannes Berg
Without CONFIG_THERMAL, the driver fails to link as it calls iwl_mvm_send_temp_report_ths_cmd() unconditionally. Fix this by making that function available, but do almost nothing but send the empty firmware command to enable CT-kill reporting. While at it, also fix that function itself to not error out when the thermal zone hasn't been initialized, but instead just send the empty firmware command in this case as well. Fixes: 242d9c8b9a93 ("iwlwifi: mvm: use FW thermal monitoring regardless of CONFIG_THERMAL") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-19ata: libahci_platform: Add of_node_put() before loop exitNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Add an of_node_put before three such goto statements. Issue found with Coccinelle. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-19Merge branch 'work.mount2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc mount API conversions from Al Viro: "Conversions to new API for shmem and friends and for mount_mtd()-using filesystems. As for the rest of the mount API conversions in -next, some of them belong in the individual trees (e.g. binderfs one should definitely go through android folks, after getting redone on top of their changes). I'm going to drop those and send the rest (trivial ones + stuff ACKed by maintainers) in a separate series - by that point they are independent from each other. Some stuff has already migrated into individual trees (NFS conversion, for example, or FUSE stuff, etc.); those presumably will go through the regular merges from corresponding trees." * 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Make fs_parse() handle fs_param_is_fd-type params better vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API shmem_parse_one(): switch to use of fs_parse() shmem_parse_options(): take handling a single option into a helper shmem_parse_options(): don't bother with mpol in separate variable shmem_parse_options(): use a separate structure to keep the results make shmem_fill_super() static make ramfs_fill_super() static devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single() vfs: Convert squashfs to use the new mount API mtd: Kill mount_mtd() vfs: Convert jffs2 to use the new mount API vfs: Convert cramfs to use the new mount API vfs: Convert romfs to use the new mount API vfs: Add a single-or-reconfig keying to vfs_get_super()
2019-09-19drm/panfrost: Prevent race when handling page faultSteven Price
When handling a GPU page fault addr_to_drm_mm_node() is used to translate the GPU address to a buffer object. However it is possible for the buffer object to be freed after the function has returned resulting in a use-after-free of the BO. Change addr_to_drm_mm_node to return the panfrost_gem_object with an extra reference on it, preventing the BO from being freed until after the page fault has been handled. Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190913160310.50444-1-steven.price@arm.com
2019-09-19drm/panfrost: Remove NULL checks for regulatorSteven Price
devm_regulator_get() is now used to populate pfdev->regulator which ensures that this cannot be NULL (a dummy regulator will be returned if necessary). So remove the checks in panfrost_devfreq_target(). Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/3e3a2c8a-b4fc-8af6-39e1-b26160db2c7c@arm.com
2019-09-19drm/panfrost: Fix regulator_get_optional() misuseMark Brown
The panfrost driver requests a supply using regulator_get_optional() but both the name of the supply and the usage pattern suggest that it is being used for the main power for the device and is not at all optional for the device for function, there is no meaningful handling for absent supplies. Such regulators should use the vanilla regulator_get() interface, it will ensure that even if a supply is not described in the system integration one will be provided in software. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904123032.23263-1-broonie@kernel.org
2019-09-19ieee802154: atusb: fix use-after-free at disconnectJohan Hovold
The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Alexander Aring <alex.aring@gmail.com> Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2019-09-19drm: Measure Self Refresh Entry/Exit times to avoid thrashingSean Paul
Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-19drm: Fix kerneldoc and remove unused struct member in self_refresh helperSean Paul
Artifacts of previous revisions. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-1-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-1-sean@poorly.run Changes in v2: - None
2019-09-19of: restore old handling of cells_name=NULL in of_*_phandle_with_args()Uwe Kleine-König
Before commit e42ee61017f5 ("of: Let of_for_each_phandle fallback to non-negative cell_count") the iterator functions calling of_for_each_phandle assumed a cell count of 0 if cells_name was NULL. This corner case was missed when implementing the fallback logic in e42ee61017f5 and resulted in an endless loop. Restore the old behaviour of of_count_phandle_with_args() and of_parse_phandle_with_args() and add a check to of_phandle_iterator_init() to prevent a similar failure as a safety precaution. of_parse_phandle_with_args_map() doesn't need a similar fix as cells_name isn't NULL there. Affected drivers are: - drivers/base/power/domain.c - drivers/base/power/domain.c - drivers/clk/ti/clk-dra7-atl.c - drivers/hwmon/ibmpowernv.c - drivers/i2c/muxes/i2c-demux-pinctrl.c - drivers/iommu/mtk_iommu.c - drivers/net/ethernet/freescale/fman/mac.c - drivers/opp/of.c - drivers/perf/arm_dsu_pmu.c - drivers/regulator/of_regulator.c - drivers/remoteproc/imx_rproc.c - drivers/soc/rockchip/pm_domains.c - sound/soc/fsl/imx-audmix.c - sound/soc/fsl/imx-audmix.c - sound/soc/meson/axg-card.c - sound/soc/samsung/tm2_wm5110.c - sound/soc/samsung/tm2_wm5110.c Thanks to Geert Uytterhoeven for reporting the issue, Peter Rosin for helping pinpoint the actual problem and the testers for confirming this fix. Fixes: e42ee61017f5 ("of: Let of_for_each_phandle fallback to non-negative cell_count") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-19usbnet: sanity checking of packet sizes and device mtuOliver Neukum
After a reset packet sizes and device mtu can change and need to be reevaluated to calculate queue sizes. Malicious devices can set this to zero and we divide by it. Introduce sanity checking. Reported-and-tested-by: syzbot+6102c120be558c885f04@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-19s390/zcrypt: CEX7S exploitation supportHarald Freudenberger
This patch adds CEX7 exploitation support for the AP bus code, the zcrypt device driver zoo and the vfio device driver. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-19s390/cio: fix intparm documentationCornelia Huck
The common I/O layer is maintaining an "intparm" inspired by the hardware intparm for driver usage. This "intparm" is not only applicaple for ssch, but also for hsch/csch. The kerneldoc states that it is only updated for hsch/csch if no prior request is pending; however, this is not what the code does (whether that would actually desireable is a different issue.) Let's at least fix the kerneldoc for now. Fixes: b2ffd8e9a76e ("[S390] cio: Add docbook comments.") Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-19s390/pkey: Add sysfs attributes to emit AES CIPHER key blobsIngo Franzki
Now that the pkey kernel module also supports CCA AES CIPHER keys: Add binary read-only sysfs attributes for the pkey module that can be used to read random CCA AES CIPHER secure keys from, similar to the already existing sysfs attributes for AES DATA and random protected keys. Keys are read from these attributes using a cat-like interface. A typical use case for those keys is to encrypt a swap device using the paes cipher. During processing of /etc/crypttab, the CCA random AES CIPHER secure key to encrypt the swap device is read from one of the attributes. The following attributes are added: ccacipher/ccacipher_aes_128 ccacipher/ccacipher_aes_192 ccacipher/ccacipher_aes_256 ccacipher/ccacipher_aes_128_xts ccacipher/ccacipher_aes_256_xts Each attribute emits a secure key blob for the corresponding key size and cipher mode. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-18vfs: Convert functionfs to use the new mount APIDavid Howells
Convert the functionfs filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> cc: linux-usb@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-18Merge branch 'work.mount-base' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount API infrastructure updates from Al Viro: "Infrastructure bits of mount API conversions. The rest is more of per-filesystem updates and that will happen in separate pull requests" * 'work.mount-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mtd: Provide fs_context-aware mount_mtd() replacement vfs: Create fs_context-aware mount_bdev() replacement new helper: get_tree_keyed() vfs: set fs_context::user_ns for reconfigure
2019-09-18Merge branch 'work.namei' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs namei updates from Al Viro: "Pathwalk-related stuff" [ Audit-related cleanups, misc simplifications, and easier to follow nd->root refcounts - Linus ] * 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: devpts_pty_kill(): don't bother with d_delete() infiniband: don't bother with d_delete() hypfs: don't bother with d_delete() fs/namei.c: keep track of nd->root refcount status fs/namei.c: new helper - legitimize_root() kill the last users of user_{path,lpath,path_dir}() namei.h: get the comments on LOOKUP_... in sync with reality kill LOOKUP_NO_EVAL, don't bother including namei.h from audit.h audit_inode(): switch to passing AUDIT_INODE_... filename_mountpoint(): make LOOKUP_NO_EVAL unconditional there filename_lookup(): audit_inode() argument is always 0
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-18Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add the ability to abort a skcipher walk. Algorithms: - Fix XTS to actually do the stealing. - Add library helpers for AES and DES for single-block users. - Add library helpers for SHA256. - Add new DES key verification helper. - Add surrounding bits for ESSIV generator. - Add accelerations for aegis128. - Add test vectors for lzo-rle. Drivers: - Add i.MX8MQ support to caam. - Add gcm/ccm/cfb/ofb aes support in inside-secure. - Add ofb/cfb aes support in media-tek. - Add HiSilicon ZIP accelerator support. Others: - Fix potential race condition in padata. - Use unbound workqueues in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits) crypto: caam - Cast to long first before pointer conversion crypto: ccree - enable CTS support in AES-XTS crypto: inside-secure - Probe transform record cache RAM sizes crypto: inside-secure - Base RD fetchcount on actual RD FIFO size crypto: inside-secure - Base CD fetchcount on actual CD FIFO size crypto: inside-secure - Enable extended algorithms on newer HW crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL crypto: inside-secure - Add EIP97/EIP197 and endianness detection padata: remove cpu_index from the parallel_queue padata: unbind parallel jobs from specific CPUs padata: use separate workqueues for parallel and serial work padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible crypto: pcrypt - remove padata cpumask notifier padata: make padata_do_parallel find alternate callback CPU workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs workqueue: unconfine alloc/apply/free_workqueue_attrs() padata: allocate workqueue internally arm64: dts: imx8mq: Add CAAM node random: Use wait_event_freezable() in add_hwgenerator_randomness() crypto: ux500 - Fix COMPILE_TEST warnings ...
2019-09-18Merge tag 'char-misc-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...
2019-09-18Merge tag 'staging-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the big staging/iio driver update for 5.4-rc1. Lots of churn here, with a few driver/filesystems moving out of staging finally: - erofs moved out of staging - greybus core code moved out of staging Along with that, a new filesytem has been added: - extfat to provide support for those devices requiring that filesystem (i.e. transfer devices to/from windows systems or printers) Other than that, there a number of new IIO drivers, and lots and lots and lots of staging driver cleanups and minor fixes as people continue to dig into those for easy changes. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (453 commits) Staging: gasket: Use temporaries to reduce line length. Staging: octeon: Avoid several usecases of strcpy staging: vhciq_core: replace snprintf with scnprintf staging: wilc1000: avoid twice IRQ handler execution for each single interrupt staging: wilc1000: remove unused interrupt status handling code staging: fbtft: make several arrays static const, makes object smaller staging: rtl8188eu: make two arrays static const, makes object smaller staging: rtl8723bs: core: Remove Macro "IS_MAC_ADDRESS_BROADCAST" dt-bindings: anybus-controller: move to staging/ tree staging: emxx_udc: remove local TRUE/FALSE definition staging: wilc1000: look for rtc_clk clock staging: dt-bindings: wilc1000: add optional rtc_clk property staging: nvec: make use of devm_platform_ioremap_resource staging: exfat: drop unused function parameter Staging: exfat: Avoid use of strcpy staging: exfat: use integer constants staging: exfat: cleanup spacing for casts staging: exfat: cleanup spacing for operators staging: rtl8723bs: hal: remove redundant variable n staging: pi433: Fix typo in documentation ...
2019-09-18Merge tag 'tty-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Even in this age, people are still making new serial port silicon, why... Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of changes in here for a number of embedded serial port devices that are being worked on because people really like to see those console logs... Other than that, nothing major here, no core tty changes that anyone should care about. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits) serial: tegra: Add PIO mode support serial: tegra: report clk rate errors serial: tegra: add support to adjust baud rate serial: tegra: DT for Adjusted baud rates serial: tegra: add support to use 8 bytes trigger serial: tegra: set maximum num of uart ports to 8 serial: tegra: check for FIFO mode enabled status dt-binding: serial: tegra: add new chips serial: tegra: report error to upper tty layer serial: tegra: flush the RX fifo on frame error serial: tegra: avoid reg access when clk disabled serial: tegra: add support to ignore read serial: sprd: correct the wrong sequence of arguments dt-bindings: serial: Convert riscv,sifive-serial to json-schema serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control serial: max310x: Properly set flags in AutoCTS mode tty: serial: fix platform_no_drv_owner.cocci warnings dt-bindings: serial: Document Freescale LINFlexD UART serial: fsl_linflexuart: Update compatible string tty: n_gsm: avoid recursive locking with async port hangup ...
2019-09-18Merge tag 'usb-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...
2019-09-18Merge tag 'driver-core-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here is the big driver core update for 5.4-rc1. There was a bit of a churn in here, with a number of core and OF platform patches being added to the tree, and then after much discussion and review and a day-long in-person meeting, they were decided to be reverted and a new set of patches is currently being reviewed on the mailing list. Other than that churn, there are two "persistent" branches in here that other trees will be pulling in as well during the merge window. One branch to add support for drivers to have the driver core automatically add sysfs attribute files when a driver is bound to a device so that the driver doesn't have to manually do it (and then clean it up, as it always gets it wrong). There's another branch in here for generic lookup helpers for the driver core that lots of busses are starting to use. That's the majority of the non-driver-core changes in this patch series. There's also some on-going debugfs file creation cleanup that has been slowly happening over the past few releases, with the goal to hopefully get that done sometime next year. All of these have been in linux-next for a while now with no reported issues" [ Note that the above-mentioned generic lookup helpers branch was already brought in by the LED merge (commit 4feaab05dc1e) that had shared it. Also note that that common branch introduced an i2c bug due to a bad conversion, which got fixed here. - Linus ] * tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits) coccinelle: platform_get_irq: Fix parse error driver-core: add include guard to linux/container.h sysfs: add BIN_ATTR_WO() macro driver core: platform: Export platform_get_irq_optional() hwmon: pwm-fan: Use platform_get_irq_optional() driver core: platform: Introduce platform_get_irq_optional() Revert "driver core: Add support for linking devices during device addition" Revert "driver core: Add edit_links() callback for drivers" Revert "of/platform: Add functional dependency link from DT bindings" Revert "driver core: Add sync_state driver/bus callback" Revert "of/platform: Pause/resume sync state during init and of_platform_populate()" Revert "of/platform: Create device links for all child-supplier depencencies" Revert "of/platform: Don't create device links for default busses" Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()" Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning" Revert "of/platform: Disable generic device linking code for PowerPC" devcoredump: fix typo in comment devcoredump: use memory_read_from_buffer of/platform: Disable generic device linking code for PowerPC device.h: Fix warnings for mismatched parameter names in comments ...
2019-09-18drm/atomic: Rename crtc_state->pageflip_flags to async_flipDaniel Vetter
It's the only flag anyone actually cares about. Plus if we're unlucky, the atomic ioctl might need a different flag for async flips. So better to abstract this away from the uapi a bit. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: David Francis <David.Francis@amd.com> Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190903190642.32588-3-daniel.vetter@ffwll.ch
2019-09-18drm/atomic: Reject FLIP_ASYNC unconditionallyDaniel Vetter
It's never been wired up. Only userspace that tried to use it (and didn't actually check whether anything works, but hey it builds) is the -modesetting atomic implementation. And we just shut that up. If there's anyone else then we need to silently accept this flag no matter what, and find a new one. Because once a flag is tainted, it's lost. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903190642.32588-2-daniel.vetter@ffwll.ch
2019-09-18drm/atomic: Take the atomic toys away from XDaniel Vetter
The -modesetting ddx has a totally broken idea of how atomic works: - doesn't disable old connectors, assuming they get auto-disable like with the legacy setcrtc - assumes ASYNC_FLIP is wired through for the atomic ioctl - not a single call to TEST_ONLY Iow the implementation is a 1:1 translation of legacy ioctls to atomic, which is a) broken b) pointless. We already have bugs in both i915 and amdgpu-DC where this prevents us from enabling neat features. If anyone ever cares about atomic in X we can easily add a new atomic level (req->value == 2) for X to get back the shiny toys. Since these broken versions of -modesetting have been shipping, there's really no other way to get out of this bind. v2: - add an informational dmesg output (Rob, Ajax) - reorder after the DRIVER_ATOMIC check to avoid useless noise (Ilia) - allow req->value > 2 so that X can do another attempt at atomic in the future v3: Go with paranoid, insist that the X should be first (suggested by Rob) Cc: Ilia Mirkin <imirkin@alum.mit.edu> References: https://gitlab.freedesktop.org/xorg/xserver/issues/629 References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/180 References: abbc0697d5fb ("drm/fb: revert the i915 Actually configure untiled displays from master") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1) Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> (v1) Cc: Michel Dänzer <michel@daenzer.net> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Adam Jackson <ajax@redhat.com> Acked-by: Adam Jackson <ajax@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190905185318.31363-1-daniel.vetter@ffwll.ch
2019-09-18HID: core: fix dmesg flooding if report field larger than 32bitJoshua Clayton
Only warn once of oversize hid report value field On HP spectre x360 convertible the message: hid-sensor-hub 001F:8087:0AC2.0002: hid_field_extract() called with n (192) > 32! (kworker/1:2) is continually printed many times per second, crowding out all else. Protect dmesg by printing the warning only one time. The size of the hid report field data structure should probably be increased. The data structure is treated as a u32 in Linux, but an unlimited number of bits in the USB hid spec, so there is some rearchitecture needed now that devices are sending more than 32 bits. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-09-18drm/amdgpu: flag navi12 and 14 as experimental for 5.4Alex Deucher
We can remove this later as things get closer to launch. Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-18reset: reset-scmi: add missing handle initialisationSudeep Holla
scmi_reset_data->handle needs to be initialised at probe, so that it can be later used to access scmi reset protocol APIs using the same. Since it was tested with a module that obtained handle elsewhere, it was missed easily. Add the missing scmi_reset_data->handle initialisation to fix the issue. Fixes: c8ae9c2da1cc ("reset: Add support for resets provided by SCMI") Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reported-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-09-18firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_resetSudeep Holla
Fix the copy paste typo that incorrectly assigns domain_id with the passed 'state' parameter instead of reset_state. Fixes: 95a15d80aa0d ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0") Reported-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-09-18irqchip/sifive-plic: Switch to fasteoi flowMarc Zyngier
The SiFive PLIC interrupt controller seems to have all the HW features to support the fasteoi flow, but the driver seems to be stuck in a distant past. Bring it into the 21st century. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Palmer Dabbelt <palmer@sifive.com> (QEMU Boot) Tested-by: Darius Rad <darius@bluespec.com> (on 2 HW PLIC implementations) Tested-by: Paul Walmsley <paul.walmsley@sifive.com> (HiFive Unleashed) Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/8636gxskmj.wl-maz@kernel.org
2019-09-18irqchip/gic-v3: Fix GIC_LINE_NR accessorZenghui Yu
As per GIC spec, ITLinesNumber indicates the maximum SPI INTID that the GIC implementation supports. And the maximum SPI INTID an implementation might support is 1019 (field value 11111). max(GICD_TYPER_SPIS(...), 1020) is not what we actually want for GIC_LINE_NR. Fix it to min(GICD_TYPER_SPIS(...), 1020). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1568789850-14080-1-git-send-email-yuzenghui@huawei.com
2019-09-18drm/kms: Duct-tape for mode object lifetime checksDaniel Vetter
commit 4f5368b5541a902f6596558b05f5c21a9770dd32 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jun 14 08:17:23 2019 +0200 drm/kms: Catch mode_object lifetime errors uncovered a bit a mess in dp drivers. Most drivers (from a quick look, all except i915) register all the dp stuff in their init code, which is too early. With CONFIG_DRM_DP_AUX_CHARDEV this will blow up, because drm_dp_aux_register tries to add a child to a device in sysfs (the connector) which doesn't even exist yet. No one seems to have cared thus far. But with the above change I also moved the setting of dev->registered after the ->load callback, in an attempt to keep old drivers from hitting any WARN_ON backtraces. But that moved radeon.ko from the "working, by accident" to "now also broken" category. Since this is a huge mess I figured a revert would be simplest. But this check has already caught issues in i915: commit 1b9bd09630d4db4827cc04d358a41a16a6bc2cb0 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Tue Aug 20 19:16:57 2019 +0300 drm/i915: Do not create a new max_bpc prop for MST connectors Hence I'd like to retain it. Fix the radeon regression by moving the setting of dev->registered back to were it was, and stop the backtraces with an explicit check for dev->driver->load. Everyone else will stay as broken with CONFIG_DRM_DP_AUX_CHARDEV. The next patch will improve the kerneldoc and add a todo entry for this. Fixes: 4f5368b5541a ("drm/kms: Catch mode_object lifetime errors") Cc: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: Michel Dänzer <michel@daenzer.net> Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Tested-by: Michel Dänzer <mdaenzer@redhat.com> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190917120936.7501-1-daniel.vetter@ffwll.ch
2019-09-17clk: imx: imx8mn: fix pll mux bitPeng Fan
pll BYPASS bit should be kept inside pll driver for glitchless freq setting following spec. If exposing the bit, that means pll driver and clk driver has two paths to touch this bit, which is wrong. So use EXT_BYPASS bit here. And drop uneeded set parent, because EXT_BYPASS default is 0. Suggested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-5-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: imx: imx8mm: fix pll mux bitPeng Fan
pll BYPASS bit should be kept inside pll driver for glitchless freq setting following spec. If exposing the bit, that means pll driver and clk driver has two paths to touch this bit, which is wrong. So use EXT_BYPASS bit here. And drop uneeded set parent, because EXT_BYPASS default is 0. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Suggested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-4-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: imx: clk-pll14xx: unbypass PLL by defaultPeng Fan
When registering the PLL, unbypass the PLL. The PLL has two bypass control bit, BYPASS and EXT_BYPASS. we will expose EXT_BYPASS to clk driver for mux usage, and keep BYPASS inside pll14xx usage. The PLL has a restriction that when M/P change, need to RESET/BYPASS pll to avoid glitch, so we could not expose BYPASS. To make it easy for clk driver usage, unbypass PLL which does not hurt current function. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-3-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: imx: pll14xx: avoid glitch when set ratePeng Fan
According to PLL1443XA and PLL1416X spec, "When BYPASS is 0 and RESETB is changed from 0 to 1, FOUT starts to output unstable clock until lock time passes. PLL1416X/PLL1443XA may generate a glitch at FOUT." So set BYPASS when RESETB is changed from 0 to 1 to avoid glitch. In the end of set rate, BYPASS will be cleared. When prepare clock, also need to take care to avoid glitch. So we also follow Spec to set BYPASS before RESETB changed from 0 to 1. And add a check if the RESETB is already 0, directly return 0; Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-2-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap80x: add AP807 clock supportBen Peled
Add driver support for AP807 clock. Signed-off-by: Ben Peled <bpeled@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-9-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap806: Prepare the introduction of AP807 clock supportBen Peled
Factor out the code that is only useful to AP806 so it will be easier to support AP807. No functional changes. Signed-off-by: Ben Peled <bpeled@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-8-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driverOmri Itach
Add dynamic AP-DCLK clock (hclk) to system controller driver. AP-DCLK is half the rate of DDR clock, so its derrived from Sample At Reset configuration. The clock frequency is required for AP806 AXI monitor profiling feature. Signed-off-by: Omri Itach <omrii@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-7-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap806: be more explicit on what SaR isMiquel Raynal
"SaR" means Sample at Reset. DIP switches can be changed on the board, their states at reset time is available through a register read. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-6-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>