summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-06-15Merge tag 'platform-drivers-x86-v5.2-3' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: - fix a couple of Mellanox driver enumeration issues - fix ASUS laptop regression with backlight - fix Dell computers that got a wrong mode (tablet versus laptop) after resume * tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration platform/x86: intel-vbtn: Report switch events when event wakes device platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
2019-06-15Merge tag 'usb-5.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.2-rc5 Nothing major, just some small gadget fixes, usb-serial new device ids, a few new quirks, and some small fixes for some regressions that have been found after the big 5.2-rc1 merge. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: Make sure an alt mode exist before getting its partner usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe() usb: gadget: dwc2: fix zlp handling usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i] usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init() usb: dwc2: Fix DMA cache alignment issues usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression) USB: Fix chipmunk-like voice when using Logitech C270 for recording audio. USB: usb-storage: Add new ID to ums-realtek usb: typec: ucsi: ccg: fix memory leak in do_flash USB: serial: option: add Telit 0x1260 and 0x1261 compositions USB: serial: pl2303: add Allied Telesis VT-Kit3 USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
2019-06-15virtio/s390: make airq summary indicators DMAHalil Pasic
The hypervisor needs to interact with the summary indicators, so these need to be DMA memory as well (at least for protected virtualization guests). Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15virtio/s390: use DMA memory for ccw I/O and classic notifiersHalil Pasic
Before virtio-ccw could get away with not using DMA API for the pieces of memory it does ccw I/O with. With protected virtualization this has to change, since the hypervisor needs to read and sometimes also write these pieces of memory. The hypervisor is supposed to poke the classic notifiers, if these are used, out of band with regards to ccw I/O. So these need to be allocated as DMA memory (which is shared memory for protected virtualization guests). Let us factor out everything from struct virtio_ccw_device that needs to be DMA memory in a satellite that is allocated as such. Note: The control blocks of I/O instructions do not need to be shared. These are marshalled by the ultravisor. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15virtio/s390: add indirection to indicators accessHalil Pasic
This will come in handy soon when we pull out the indicators from virtio_ccw_device to a memory area that is shared with the hypervisor (in particular for protected virtualization guests). Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15virtio/s390: use cacheline aligned airq bit vectorsHalil Pasic
The flag AIRQ_IV_CACHELINE was recently added to airq_iv_create(). Let us use it! We actually wanted the vector to span a cacheline all along. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15s390/airq: use DMA memory for adapter interruptsHalil Pasic
Protected virtualization guests have to use shared pages for airq notifier bit vectors, because the hypervisor needs to write these bits. Let us make sure we allocate DMA memory for the notifier bit vectors by replacing the kmem_cache with a dma_cache and kalloc() with cio_dma_zalloc(). Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15s390/cio: add basic protected virtualization supportHalil Pasic
As virtio-ccw devices are channel devices, we need to use the dma area within the common I/O layer for any communication with the hypervisor. Note that we do not need to use that area for control blocks directly referenced by instructions, e.g. the orb. It handles neither QDIO in the common code, nor any device type specific stuff (like channel programs constructed by the DASD driver). An interesting side effect is that virtio structures are now going to get allocated in 31 bit addressable storage. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15s390/cio: introduce DMA pools to cioHalil Pasic
To support protected virtualization cio will need to make sure the memory used for communication with the hypervisor is DMA memory. Let us introduce one global pool for cio. Our DMA pools are implemented as a gen_pool backed with DMA pages. The idea is to avoid each allocation effectively wasting a page, as we typically allocate much less than PAGE_SIZE. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15s390/pkey: Use -ENODEV instead of -EOPNOTSUPPDavid Hildenbrand
systemd-modules-load.service automatically tries to load the pkey module on systems that have MSA. Pkey also requires the MSA3 facility and a bunch of subfunctions. Failing with -EOPNOTSUPP makes "systemd-modules-load.service" fail on any system that does not have all needed subfunctions. For example, when running under QEMU TCG (but also on systems where protected keys are disabled via the HMC). Let's use -ENODEV, so systemd-modules-load.service properly ignores failing to load the pkey module because of missing HW functionality. While at it, also convert the -EOPNOTSUPP in pkey_clr2protkey() to -ENODEV. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15block: null_blk: fix race condition for null_del_devBob Liu
Dulicate call of null_del_dev() will trigger null pointer error like below. The reason is a race condition between nullb_device_power_store() and nullb_group_drop_item(). CPU#0 CPU#1 ---------------- ----------------- do_rmdir() >configfs_rmdir() >client_drop_item() >nullb_group_drop_item() nullb_device_power_store() >null_del_dev() >test_and_clear_bit(NULLB_DEV_FL_UP >null_del_dev() ^^^^^ Duplicated null_dev_dev() triger null pointer error >clear_bit(NULLB_DEV_FL_UP The fix could be keep the sequnce of clear NULLB_DEV_FL_UP and null_del_dev(). [ 698.613600] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 698.613608] #PF error: [normal kernel read fault] [ 698.613611] PGD 0 P4D 0 [ 698.613619] Oops: 0000 [#1] SMP PTI [ 698.613627] CPU: 3 PID: 6382 Comm: rmdir Not tainted 5.0.0+ #35 [ 698.613631] Hardware name: LENOVO 20LJS2EV08/20LJS2EV08, BIOS R0SET33W (1.17 ) 07/18/2018 [ 698.613644] RIP: 0010:null_del_dev+0xc/0x110 [null_blk] [ 698.613649] Code: 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b eb 97 e8 47 bb 2a e8 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <8b> 77 18 48 89 fb 4c 8b 27 48 c7 c7 40 57 1e c1 e8 bf c7 cb e8 48 [ 698.613654] RSP: 0018:ffffb887888bfde0 EFLAGS: 00010286 [ 698.613659] RAX: 0000000000000000 RBX: ffff9d436d92bc00 RCX: ffff9d43a9184681 [ 698.613663] RDX: ffffffffc11e5c30 RSI: 0000000068be6540 RDI: 0000000000000000 [ 698.613667] RBP: ffffb887888bfdf0 R08: 0000000000000001 R09: 0000000000000000 [ 698.613671] R10: ffffb887888bfdd8 R11: 0000000000000f16 R12: ffff9d436d92bc08 [ 698.613675] R13: ffff9d436d94e630 R14: ffffffffc11e5088 R15: ffffffffc11e5000 [ 698.613680] FS: 00007faa68be6540(0000) GS:ffff9d43d14c0000(0000) knlGS:0000000000000000 [ 698.613685] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 698.613689] CR2: 0000000000000018 CR3: 000000042f70c002 CR4: 00000000003606e0 [ 698.613693] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 698.613697] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 698.613700] Call Trace: [ 698.613712] nullb_group_drop_item+0x50/0x70 [null_blk] [ 698.613722] client_drop_item+0x29/0x40 [ 698.613728] configfs_rmdir+0x1ed/0x300 [ 698.613738] vfs_rmdir+0xb2/0x130 [ 698.613743] do_rmdir+0x1c7/0x1e0 [ 698.613750] __x64_sys_rmdir+0x17/0x20 [ 698.613759] do_syscall_64+0x5a/0x110 [ 698.613768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15md/raid10: read balance chooses idlest disk for SSDGuoqing Jiang
Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15md: raid1-10: Unify r{1,10}bio_pool_freeMarcos Paulo de Souza
Avoiding duplicated code, since they just execute a kfree. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15md: raid10: Use struct_size() in kmalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kmalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15md/raid1: get rid of extra blank line and spaceYufen Yu
This patch get rid of extra blank line and space, and add necessary space for code. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15md: fix spelling typo and add necessary spaceYufen Yu
This patch fix a spelling typo and add necessary space for code. In addition, the patch get rid of the unnecessary 'if'. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15md: md.c: Return -ENODEV when mddev is NULL in rdev_attr_showMarcos Paulo de Souza
Commit c42d3240990814eec1e4b2b93fa0487fc4873aed ("md: return -ENODEV if rdev has no mddev assigned") changed rdev_attr_store to return -ENODEV when rdev->mddev is NULL, now do the same to rdev_attr_show. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15raid5-cache: Need to do start() part job after adding journal deviceXiao Ni
commit d5d885fd514f ("md: introduce new personality funciton start()") splits the init job to two parts. The first part run() does the jobs that do not require the md threads. The second part start() does the jobs that require the md threads. Now it just does run() in adding new journal device. It needs to do the second part start() too. Fixes: d5d885fd514f ("md: introduce new personality funciton start()") Cc: stable@vger.kernel.org #v4.9+ Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15drivers: md: Unify common definitions of raid1 and raid10Marcos Paulo de Souza
These definitions are being moved to raid1-10.c. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14Merge tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "Nothing unsettling here, also not aware of anything serious still pending. The edid override regression fix took a bit longer since this seems to be an area with an overabundance of bad options. But the fix we have now seems like a good path forward. Next week it should be back to Dave. Summary: - fix regression on amdgpu on SI - fix edid override regression - driver fixes: amdgpu, i915, mediatek, meson, panfrost - fix writecombine for vmap in gem-shmem helper (used by panfrost) - add more panel quirks" * tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm: (25 commits) drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported() drm: add fallback override/firmware EDID modes workaround drm/edid: abstract override/firmware EDID retrieval drm/i915/perf: fix whitelist on Gen10+ drm/i915/sdvo: Implement proper HDMI audio support for SDVO drm/i915: Fix per-pixel alpha with CCS drm/i915/dmc: protect against reading random memory drm/i915/dsi: Use a fuzzy check for burst mode clock check drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc drm/panfrost: Require the simple_ondemand governor drm/panfrost: make devfreq optional again drm/gem_shmem: Use a writecombine mapping for ->vaddr drm: panel-orientation-quirks: Add quirk for GPD MicroPC drm: panel-orientation-quirks: Add quirk for GPD pocket2 drm/meson: fix G12A primary plane disabling drm/meson: fix primary plane disabling drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable() drm/mediatek: clear num_pipes when unbind driver ...
2019-06-14hv_netvsc: Set probe mode to syncHaiyang Zhang
For better consistency of synthetic NIC names, we set the probe mode to PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus channel offer sequence. Fixes: af0a5646cb8d ("use the new async probing feature for the hyperv drivers") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: fix warning same module namesAnders Roxell
When building with CONFIG_NET_DSA_REALTEK_SMI and CONFIG_REALTEK_PHY enabled as loadable modules, we see the following warning: warning: same module names found: drivers/net/phy/realtek.ko drivers/net/dsa/realtek.ko Rework so the driver name is realtek-smi instead of realtek. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: microchip: Don't try to read stats for unused portsRobert Hancock
If some of the switch ports were not listed in the device tree, due to being unused, the ksz_mib_read_work function ended up accessing a NULL dp->slave pointer and causing an oops. Skip checking statistics for any unused ports. Fixes: 7c6ff470aa867f53 ("net: dsa: microchip: add MIB counter reading support") Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14qmi_wwan: extend permitted QMAP mux_id value rangeReinhard Speyerer
Permit mux_id values up to 254 to be used in qmimux_register_device() for compatibility with ip(8) and the rmnet driver. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14qmi_wwan: avoid RCU stalls on device disconnect when in QMAP modeReinhard Speyerer
Switch qmimux_unregister_device() and qmi_wwan_disconnect() to use unregister_netdevice_queue() and unregister_netdevice_many() instead of unregister_netdevice(). This avoids RCU stalls which have been observed on device disconnect in certain setups otherwise. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14qmi_wwan: add network device usage statistics for qmimux devicesReinhard Speyerer
Add proper network device usage statistics for qmimux devices instead of reporting all-zero values for them. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14qmi_wwan: add support for QMAP padding in the RX pathReinhard Speyerer
The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet driver which does not process QMAP padding in the RX path correctly. Add support for QMAP padding to qmimux_rx_fixup() according to the description of the rmnet driver. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single bug fix for hpsa. The user visible consequences aren't clear, but the ioaccel2 raid acceleration may misfire on the malformed request assuming the payload is big enough to require chaining (more than 31 sg entries)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hpsa: correct ioaccel2 chaining
2019-06-14Merge tag 'for-linus-20190614' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Remove references to old schedulers for the scheduler switching and blkio controller documentation (Andreas) - Kill duplicate check for report zone for null_blk (Chaitanya) - Two bcache fixes (Coly) - Ensure that mq-deadline is selected if zoned block device is enabled, as we need that to support them (Damien) - Fix io_uring memory leak (Eric) - ps3vram fallout from LBDAF removal (Geert) - Redundant blk-mq debugfs debugfs_create return check cleanup (Greg) - Extend NOPLM quirk for ST1000LM024 drives (Hans) - Remove error path warning that can now trigger after the queue removal/addition fixes (Ming) * tag 'for-linus-20190614' of git://git.kernel.dk/linux-block: block/ps3vram: Use %llu to format sector_t after LBDAF removal libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached bcache: fix stack corruption by PRECEDING_KEY() blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests blkio-controller.txt: Remove references to CFQ block/switching-sched.txt: Update to blk-mq schedulers null_blk: remove duplicate check for report zone blk-mq: no need to check return value of debugfs_create functions io_uring: fix memory leak of UNIX domain socket inode block: force select mq-deadline for zoned block devices
2019-06-14Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has two simple but wanted driver fixes for you" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: pca-platform: Fix GPIO lookup code i2c: acorn: fix i2c warning
2019-06-14clk: tegra210: Fix default rates for HDA clocksJon Hunter
Currently the default clock rates for the HDA and HDA2CODEC_2X clocks are both 19.2MHz. However, the default rates for these clocks should actually be 51MHz and 48MHz, respectively. The current clock settings results in a distorted output during audio playback. Correct the default clock rates for these clocks by specifying them in the clock init table for Tegra210. Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-14Merge tag 'mac80211-for-davem-2019-06-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes, all over: * a few memory leaks * fixes for management frame protection security and A2/A3 confusion (affecting TDLS as well) * build fix for certificates * etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/devm_memremap_pages: fix final page put race PCI/P2PDMA: track pgmap references per resource, not globally lib/genalloc: introduce chunk owners PCI/P2PDMA: fix the gen_pool_add_virt() failure path mm/devm_memremap_pages: introduce devm_memunmap_pages drivers/base/devres: introduce devm_release_action() mm/vmscan.c: fix trying to reclaim unevictable LRU page coredump: fix race condition between collapse_huge_page() and core dumping mm/mlock.c: change count_mm_mlocked_page_nr return type mm: mmu_gather: remove __tlb_reset_range() for force flush fs/ocfs2: fix race in ocfs2_dentry_attach_lock() mm/vmscan.c: fix recent_rotated history mm/mlock.c: mlockall error for flag MCL_ONFAULT scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node mm: memcontrol: don't batch updates of local VM stats and events
2019-06-14Merge branch 'drm-fixes-5.2' of git://people.freedesktop.org/~agd5f/linux ↵Daniel Vetter
into drm-fixes Fixes for 5.2: - Extend previous vce fix for resume to uvd and vcn - Fix bounds checking in ras debugfs interface - Fix a regression on SI using amdgpu Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613021856.3307-1-alexander.deucher@amd.com
2019-06-14Merge tag 'iommu-fixes-v5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - three fixes for Intel VT-d to fix a potential dead-lock, a formatting fix and a bit setting fix - one fix for the ARM-SMMU to make it work on some platforms with sub-optimal SMMU emulation * tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Avoid constant zero in TLBI writes iommu/vt-d: Set the right field for Page Walk Snoop iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock iommu: Add missing new line for dma type
2019-06-14Merge tag 'gpio-v5.2-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "A single fix for the PCA953x driver affecting some fringe variants of the chip" * tag 'gpio-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: hack to fix 24 bit gpio expanders
2019-06-14LSM: switch to blocking policy update notifiersJanne Karhunen
Atomic policy updaters are not very useful as they cannot usually perform the policy updates on their own. Since it seems that there is no strict need for the atomicity, switch to the blocking variant. While doing so, rename the functions accordingly. Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-06-14gpu: ipu-v3: image-convert: Fix image downsize coefficientsSteve Longerbeam
The output of the IC downsizer unit in both dimensions must be <= 1024 before being passed to the IC resizer unit. This was causing corrupted images when: input_dim > 1024, and input_dim / 2 < output_dim < input_dim Some broken examples were 1920x1080 -> 1024x768 and 1920x1080 -> 1280x1080. Fixes: 70b9b6b3bcb21 ("gpu: ipu-v3: image-convert: calculate per-tile resize coefficients") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: image-convert: Fix input bytesperline for packed formatsSteve Longerbeam
The input bytesperline calculation for packed pixel formats was incorrect. The min/max clamping values must be multiplied by the packed bits-per-pixel. This was causing corrupted converted images when the input format was RGB4 (probably also other input packed formats). Fixes: d966e23d61a2c ("gpu: ipu-v3: image-convert: fix bytesperline adjustment") Reported-by: Harsha Manjula Mallikarjun <Harsha.ManjulaMallikarjun@in.bosch.com> Suggested-by: Harsha Manjula Mallikarjun <Harsha.ManjulaMallikarjun@in.bosch.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: image-convert: Fix input bytesperline width/height alignSteve Longerbeam
The output width and height alignment values were being used in the input bytesperline calculation. Fix by separating local vars w_align and h_align into w_align_in, h_align_in, w_align_out, and h_align_out. Fixes: d966e23d61a2c ("gpu: ipu-v3: image-convert: fix bytesperline adjustment") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14thunderbolt: Implement CIO reset correctly for Titan RidgeMika Westerberg
When starting ICM firmware on Apple systems we need to perform CIO reset as part of the flow. However, it turns out that the reset register has changed to another location in Titan Ridge. Fix this by introducing ->cio_reset() callback with corresponding implementations for Alpine and Titan Ridge. Fixes: c4630d6ae6e3 ("thunderbolt: Start firmware on Titan Ridge Apple systems") Reported-by: Peter Bowen <pzb@amazon.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-14ACPI: configfs: Resolve objects on host-directed table loadsNikolaus Voss
If an ACPI SSDT overlay is loaded after built-in tables have been loaded e.g. via configfs or efivar_ssdt_load() it is necessary to rewalk the namespace to resolve references. Without this, relative and absolute paths like ^PCI0.SBUS or \_SB.PCI0.SBUS are not resolved correctly. Make configfs loads use the same method as efivar_ssdt_load(). Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-14Merge tag 'drm-misc-fixes-2019-06-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Sean writes: meson: A few G12A fixes across the driver (Neil) quirks: A couple quirks for GPD devices (Hans) gem_shmem: Use writecombine when vmapping non-dmabuf BOs (Boris) panfrost: A couple tweaks to requiring devfreq (Neil & Ezequiel) edid: Ensure we return the override mode when ddc probe fails (Jani) Cc: Hans de Goede <hdegoede@redhat.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190613143946.GA24233@art_vandelay
2019-06-14PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() takeBart Van Assche
When debugging device driver power management code it is convenient to know how much time is spent in the "suspend start" and "suspend end" phases. Hence log the time spent in these phases. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-14gpio: Drop the parent_irq from gpio_irq_chipLinus Walleij
We already have an array named "parents" so instead of letting one point to the other, simply allocate a dynamic array to hold the parents, just one if desired and drop the number of members in gpio_irq_chip by 1. Rename gpiochip to gc in the process. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-14gpio: Add GPIOLIB_IRQCHIP cleanup to TODOLinus Walleij
We now have two APIs for registering GPIOLIB_IRQCHIP, this is not working and creating confusion. Add a TODO item to fix it up. Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-14gpio: ftgpio: Pass irqchip when adding gpiochipLinus Walleij
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-13mm/devm_memremap_pages: fix final page put raceDan Williams
Logan noticed that devm_memremap_pages_release() kills the percpu_ref drops all the page references that were acquired at init and then immediately proceeds to unplug, arch_remove_memory(), the backing pages for the pagemap. If for some reason device shutdown actually collides with a busy / elevated-ref-count page then arch_remove_memory() should be deferred until after that reference is dropped. As it stands the "wait for last page ref drop" happens *after* devm_memremap_pages_release() returns, which is obviously too late and can lead to crashes. Fix this situation by assigning the responsibility to wait for the percpu_ref to go idle to devm_memremap_pages() with a new ->cleanup() callback. Implement the new cleanup callback for all devm_memremap_pages() users: pmem, devdax, hmm, and p2pdma. Link: http://lkml.kernel.org/r/155727339156.292046.5432007428235387859.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-13PCI/P2PDMA: track pgmap references per resource, not globallyDan Williams
In preparation for fixing a race between devm_memremap_pages_release() and the final put of a page from the device-page-map, allocate a percpu-ref per p2pdma resource mapping. Link: http://lkml.kernel.org/r/155727338646.292046.9922678317501435597.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-13PCI/P2PDMA: fix the gen_pool_add_virt() failure pathDan Williams
The pci_p2pdma_add_resource() implementation immediately frees the pgmap if gen_pool_add_virt() fails. However, that means that when @dev triggers a devres release devm_memremap_pages_release() will crash trying to access the freed @pgmap. Use the new devm_memunmap_pages() to manually free the mapping in the error path. Link: http://lkml.kernel.org/r/155727337603.292046.13101332703665246702.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Fixes: 52916982af48 ("PCI/P2PDMA: Support peer-to-peer memory") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 10:10:54 +0000