| Age | Commit message (Collapse) | Author |
|---|
|
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
The malidp driver specifies a preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-10-tzimmermann@suse.de
|
|
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
The hdlcd driver specifies a preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-9-tzimmermann@suse.de
|
|
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
The komeda driver specifies a preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-8-tzimmermann@suse.de
|
|
Call drm_client_setup_with_fourcc() to run the kernel's default client
setup for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
v2:
- use drm_client_setup_with_fourcc()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-7-tzimmermann@suse.de
|
|
Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of DMA-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-6-tzimmermann@suse.de
|
|
DRM may support multiple in-kernel clients that run as soon as a DRM
driver has been registered. To select the client(s) in a single place,
introduce drm_client_setup().
Drivers that call the new helper automatically instantiate the kernel's
configured default clients. Only fbdev emulation is currently supported.
Later versions can add support for DRM-based logging, a boot logo or even
a console.
Some drivers handle the color mode for clients internally. Provide the
helper drm_client_setup_with_color_mode() for them.
Using the new interface requires the driver to select
DRM_CLIENT_SELECTION in its Kconfig. For now this only enables the
client-setup helpers if the fbdev client has been configured by the
user. A future patchset will further modularize client support and
rework DRM_CLIENT_SELECTION to select the correct dependencies for
all its clients.
v5:
- add CONFIG_DRM_CLIENT_SELECTION und DRM_CLIENT_SETUP
v4:
- fix docs for drm_client_setup_with_fourcc() (Geert)
v3:
- fix build error
v2:
- add drm_client_setup_with_fourcc() (Laurent)
- push default-format handling into actual clients
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-5-tzimmermann@suse.de
|
|
Add an fbdev client that can work with any memory manager. The
client implementation is the same as existing code in fbdev-dma or
fbdev-shmem.
Provide struct drm_driver.fbdev_probe for the new client to allocate
the surface GEM buffer. The new callback replaces fb_probe of struct
drm_fb_helper_funcs, which does the same.
To use the new client, DRM drivers set fbdev_probe in their struct
drm_driver instance and call drm_fbdev_client_setup(). Probing and
creating the fbdev surface buffer is now independent from the other
operations in struct drm_fb_helper. For the pixel format, the fbdev
client either uses a specified format, the value in preferred_depth
or 32-bit RGB.
v2:
- test for struct drm_fb_helper.funcs for NULL (Sui)
- respect struct drm_mode_config.preferred_depth for default format
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-4-tzimmermann@suse.de
|
|
Call vga_switcheroo_client_fb_set() with the PCI device from the
instance of struct fb_info. All fbdev clients now run these calls.
For non-PCI devices or drivers without vga-switcheroo, this does
nothing. For i915 and radeon, it allows these drivers to use a
common fbdev client.
The device is the same as the one stored in struct drm_client and
struct drm_fb_helper, so there is no difference in behavior. Some
NULL-pointer checks are being removed, where those pointers cannot
be NULL.
v4:
- clarify call semantics for drm_fb_helper_unregister_info() (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-3-tzimmermann@suse.de
|
|
The color mode as specified on the kernel command line gives the user's
preferred color depth and number of bits per pixel. Move the
color-mode-to-format conversion from fbdev helpers into a 4CC helper,
so that it can be shared among DRM clients.
v2:
- fix grammar in commit message (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-2-tzimmermann@suse.de
|
|
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Some driver specific fixes that came in during the merge window.
Lorenzo Bianconi did some extra testing on the recently added arioha
driver and found some issues, Alexander Dahl fixed some issues with
signal delays in the Atmel QSPI driver and Jinjie Ruan has been fixing
some nits with runtime PM cleanup"
* tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel-quadspi: Avoid overwriting delay register settings
spi: airoha: remove read cache in airoha_snand_dirmap_read()
spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time
spi: atmel-quadspi: Undo runtime PM changes at driver exit time
spi: airoha: fix airoha_snand_{write,read}_data data_len estimation
spi: airoha: fix dirmap_{read,write} operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"More conversions of DT bindings to yaml. There is one new driver, for
the DFRobot SD2405AL and support for important features of the stm32
RTC. Summary:
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range"
* tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rc5t619: use proper module tables
rtc: m48t59: set range
dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property
rtc: m48t59: Remove division condition with direct comparison
rtc: at91sam9: fix OF node leak in probe() error path
rtc: sun6i: disable automatic clock input switching
dt-bindings: rtc: Drop non-trivial duplicate compatibles
dt-bindings: vendor-prefixes: Add DFRobot.
dt-bindings: rtc: Add support for SD2405AL.
rtc: Add driver for SD2405AL
rtc: s35390a: Drop vendorless compatible string from match table
rtc: twl: convert comma to semicolon
dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML
rtc: stm32: add alarm A out feature
rtc: stm32: add Low Speed Clock Output (LSCO) support
rtc: stm32: add pinctrl and pinmux interfaces
dt-bindings: rtc: stm32: describe pinmux nodes
|
|
Drop support for Devicetree from, because the binding is being reverted
(on basis of duplicating existing binding) and property was not added to
the original binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Background
~~~~~~~~~~
The driver uses 'use_acpi = true' in C-state custom table for all Xeon
platforms. The meaning of this flag is as follows.
1. If a C-state from the custom table is defined in ACPI _CST (matched
by the mwait hint), then enable this C-state.
2. Otherwise, disable this C-state, unless the C-sate definition in the
custom table has the 'CPUIDLE_FLAG_ALWAYS_ENABLE' flag set, in which
case enabled it.
The goal is to honor BIOS C6 settings - If BIOS disables C6, disable it
by default in the OS too (but it can be enabled via sysfs).
This works well on Xeons that expose only one flavor of C6. This are all
Xeons except for the newest Granite Rapids (GNR) and Sierra Forest (SRF).
The problem
~~~~~~~~~~~
GNR and SRF have 2 flavors of C6: C6/C6P on GNR, C6S/C6SP on SRF. The
the "P" flavor allows for the package C6, while the "non-P" flavor
allows only for core/module C6.
As far as this patch is concerned, both GNR and SRF platforms are
handled the same way. Therefore, further discussion is focused on GNR,
but it applies to SRF as well.
On Intel Xeon platforms, BIOS exposes only 2 ACPI C-states: C1 and C2.
Well, depending on BIOS settings, C2 may be named as C3. But there still
will be only 2 states - C1 and C3. But this is a non-essential detail,
so further discussion is focused on the ACPI C1 and C2 case.
On pre-GNR/SRF Xeon platforms, ACPI C1 is mapped to C1 or C1E, and ACPI
C2 is mapped to C6. The 'use_acpi' flag works just fine:
* If ACPI C2 enabled, enable C6.
* Otherwise, disable C6.
However, on GNR there are 2 flavors of C6, so BIOS maps ACPI C2 to
either C6 or C6P, depending on the user settings. As a result, due to
the 'use_acpi' flag, 'intel_idle' disables least one of the C6 flavors.
BIOS | OS | Verdict
----------------------------------------------------|---------
ACPI C2 disabled | C6 disabled, C6P disabled | OK
ACPI C2 mapped to C6 | C6 enabled, C6P disabled | Not OK
ACPI C2 mapped to C6P | C6 disabled, C6P enabled | Not OK
The goal of 'use_acpi' is to honor BIOS ACPI C2 disabled case, which
works fine. But if ACPI C2 is enabled, the goal is to enable all flavors
of C6, not just one of the flavors. This was overlooked when enabling
GNR/SRF platforms.
In other words, before GNR/SRF, the ACPI C2 status was binary - enabled
or disabled. But it is not binary on GNR/SRF, however the goal is to
continue treat it as binary.
The fix
~~~~~~~
Notice, that current algorithm matches ACPI and custom table C-states
by the mwait hint. However, mwait hint consists of the 'state' and
'sub-state' parts, and all C6 flavors have the same state value of 0x20,
but different sub-state values.
Introduce new C-state table flag - CPUIDLE_FLAG_PARTIAL_HINT_MATCH and
add it to both C6 flavors of the GNR/SRF platforms.
When matching ACPI _CST and custom table C-states, match only the start
part if the C-state has CPUIDLE_FLAG_PARTIAL_HINT_MATCH, other wise
match both state and sub-state parts (as before).
With this fix, GNR C-states enabled/disabled status looks like this.
BIOS | OS
----------------------------------------------------
ACPI C2 disabled | C6 disabled, C6P disabled
ACPI C2 mapped to C6 | C6 enabled, C6P enabled
ACPI C2 mapped to C6P | C6 enabled, C6P enabled
Possible alternative
~~~~~~~~~~~~~~~~~~~~
The alternative would be to remove 'use_acpi' flag for GNR and SRF.
This would be a simpler solution, but it would violate the principle of
least surprise - users of Xeon platforms are used to the fact that
intel_idle honors C6 enabled/disabled flag. It is more consistent user
experience if GNR/SRF continue doing so.
How tested
~~~~~~~~~~
Tested on GNR and SRF platform with all the 3 BIOS configurations: ACPI
C2 disabled, mapped to C6/C6S, mapped to C6P/C6SP.
Tested on Ice lake Xeon and Sapphire Rapids Xeon platforms with ACPI C2
enabled and disabled, just to verify that the patch does not break older
Xeons.
Fixes: 92813fd5b156 ("intel_idle: add Sierra Forest SoC support")
Fixes: 370406bf5738 ("intel_idle: add Granite Rapids Xeon support")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20240913165143.4140073-1-dedekind1@gmail.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 4c27ac45e622 ("gpu: host1x: Request syncpoint IRQs only during
probe") caused a boot regression for the Tegra186 device. Following this
update the function host1x_intr_init() now calls
host1x_hw_intr_disable_all_syncpt_intrs() during probe. However,
host1x_intr_init() is called before runtime power-management is enabled
for Host1x and the function host1x_hw_intr_disable_all_syncpt_intrs() is
accessing hardware registers. So if the Host1x hardware is not enabled
prior to probing then the device will now hang on attempting to access
the registers. So far this is only observed on Tegra186, but potentially
could be seen on other devices.
Fix this by moving the call to the function host1x_intr_init() in probe
to after enabling the runtime power-management in the probe and update
the failure path in probe as necessary.
Fixes: 4c27ac45e622 ("gpu: host1x: Request syncpoint IRQs only during probe")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925160504.60221-1-jonathanh@nvidia.com
|
|
In order to store device DMA parameters, the DMA framework depends on
the device's dma_parms field to point at a valid memory location. Add
backing storage for this in struct host1x_memory_context and point to
it.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916133320.368620-1-thierry.reding@gmail.com
|
|
program SDMAx_QUEUEx_SCHEDULE_CNTL for context switch due to
quantum in KFD for GFX12.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
v1 - remove cs parse code (Christian)
On VCN v4_0_6 AV1 is supported on both the instances.
Remove cs IB parse code since explict handling of AV1 schedule is
not required.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Make CU occupancy calculations work on GFX 9.4.3 by
updating the logic to handle multiple XCCs correctly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, the code uses the IH_VMID_X_LUT register to map
a queue's vmid to the corresponding PASID. This logic is racy
since CP can update the VMID-PASID mapping anytime especially
when there are more processes than number of vmids. Update the
logic to calculate CU occupancy by matching doorbell offset of
the queue with valid wave counts against the process's queues.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VF FLR will be triggered by host driver before job timeout,
hence the error status of GPU get cleared. Performing a
coredump here is unnecessary.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch tries to solve the basic problem we also need to sync to
the KFD fences of the BO because otherwise it can be that we clear
PTEs while the KFD queues are still running.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
enable_level_process_quantum_check is requried to enable process
quantum based scheduling.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
Expose allowed group priorities with a new device query.
This new uAPI will be used in Mesa to properly report what priorities a
user can use for EGL_IMG_context_priority.
Since this extends the uAPI and because userland needs a way to
advertise priorities accordingly, this also bumps the driver minor
version.
v2:
- Remove drm_panthor_group_allow_priority_flags definition
- Document that allowed_mask is a bitmask of drm_panthor_group_priority
v3:
- Use BIT macro in panthor_query_group_priorities_info
- Add r-b from Steven Price and Boris Brezillon
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909064820.34982-4-mary.guillemard@collabora.com
|
|
This adds a new value to drm_panthor_group_priority exposing the
realtime priority to userspace.
This is required to implement NV_context_priority_realtime in Mesa.
v2:
- Add Steven Price r-b
v3:
- Add Boris Brezillon r-b
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909064820.34982-3-mary.guillemard@collabora.com
|
|
Add a new V3D parameter to expose the support of Super Pages to
userspace. The userspace might want to know this information to
apply optimizations that are specific to kernels with Super Pages
enabled.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-12-mcanal@igalia.com
|
|
Add a modparam for turning off Big/Super Pages to make sure that if an
user doesn't want Big/Super Pages enabled, it can disabled it by setting
the modparam to false.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-11-mcanal@igalia.com
|
|
Although Big/Super Pages could appear naturally, it would be quite hard
to have 1MB or 64KB allocated contiguously naturally. Therefore, we can
force the creation of large pages allocated contiguously by using a
mountpoint with "huge=within_size" enabled.
Therefore, as V3D has a mountpoint with "huge=within_size" (if user has
THP enabled), use this mountpoint for BO creation if available. This
will allow us to create large pages allocated contiguously and make use
of Big/Super Pages.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-10-mcanal@igalia.com
|
|
The V3D MMU also supports 64KB and 1MB pages, called big and super pages,
respectively. In order to set a 64KB page or 1MB page in the MMU, we need
to make sure that page table entries for all 4KB pages within a big/super
page must be correctly configured.
In order to create a big/super page, we need a contiguous memory region.
That's why we use a separate mountpoint with THP enabled. In order to
place the page table entries in the MMU, we iterate over the 16 4KB pages
(for big pages) or 256 4KB pages (for super pages) and insert the PTE.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-9-mcanal@igalia.com
|
|
Currently, we are using an alignment of 128 kB to insert a node, which
ends up wasting memory as we perform plenty of small BOs allocations
(<= 4 kB). We require that allocations are aligned to 128Kb so for any
allocation smaller than that, we are wasting the difference.
This implies that we cannot effectively use the whole 4 GB address space
available for the GPU in the RPi 4. Currently, we can allocate up to
32000 BOs of 4 kB (~140 MB) and 3000 BOs of 400 kB (~1,3 GB). This can be
quite limiting for applications that have a high memory requirement, such
as vkoverhead [1].
By reducing the page alignment to 4 kB, we can allocate up to 1000000 BOs
of 4 kB (~4 GB) and 10000 BOs of 400 kB (~4 GB). Moreover, by performing
benchmarks, we were able to attest that reducing the page alignment to
4 kB can provide a general performance improvement in OpenGL
applications (e.g. glmark2).
Therefore, this patch reduces the alignment of the node allocation to 4
kB, which will allow RPi users to explore the whole 4GB virtual
address space provided by the hardware. Also, this patch allow users to
fully run vkoverhead in the RPi 4/5, solving the issue reported in [1].
[1] https://github.com/zmike/vkoverhead/issues/14
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-8-mcanal@igalia.com
|
|
Create a function `drm_gem_shmem_create_with_mnt()`, similar to
`drm_gem_shmem_create()`, that has a mountpoint as a argument. This
function will create a shmem GEM object in a given tmpfs mountpoint.
This function will be useful for drivers that have a special mountpoint
with flags enabled.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-7-mcanal@igalia.com
|
|
Create a separate "tmpfs" kernel mount for V3D. This will allow us to
move away from the shmemfs `shm_mnt` and gives the flexibility to do
things like set our own mount options. Here, the interest is to use
"huge=", which should allow us to enable the use of THP for our
shmem-backed objects.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-6-mcanal@igalia.com
|
|
For some applications, such as applications that uses huge pages, we might
want to have a different mountpoint, for which we pass mount flags that
better match our usecase.
Therefore, create a new function `drm_gem_object_init_with_mnt()` that
allow us to define the tmpfs mountpoint where the GEM object will be
created. If this parameter is NULL, then we fallback to `shmem_file_setup()`.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-5-mcanal@igalia.com
|
|
If the scheduler initialization fails, GEM initialization must fail as
well. Therefore, if `v3d_sched_init()` fails, free the DMA memory
allocated and return the error value in `v3d_gem_init()`.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-4-mcanal@igalia.com
|
|
We must ensure that the MMU is flushed before we supply more memory to
the binner, otherwise we might end up with invalid MMU accesses by the
GPU.
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-3-mcanal@igalia.com
|
|
We must first flush the MMU cache and then, flush the TLB, not the other
way around. Currently, we can see a race condition between the MMU cache
and the TLB when running multiple rendering processes at the same time.
This is evidenced by MMU errors triggered by the IRQ.
Fix the MMU flush order by flushing the MMU cache and then the TLB.
Also, in order to address the race condition, wait for the MMU cache flush
to finish before starting the TLB flush.
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-2-mcanal@igalia.com
|
|
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and this can increase over all security.
```
[Before]
text data bss dec hex filename
5974 1008 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
[After]
text data bss dec hex filename
6038 944 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Message-Id: <20240904011743.2010319-1-lihongbo22@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently, when a new MR is set up, the old MR is deleted. MR deletion
is about 30-40% the time of MR creation. As deleting the old MR is not
important for the process of setting up the new MR, this operation
can be postponed.
This series adds a workqueue that does MR garbage collection at a later
point. If the MR lock is taken, the handler will back off and
reschedule. The exception during shutdown: then the handler must
not postpone the work.
Note that this is only a speculative optimization: if there is some
mapping operation that is triggered while the garbage collector handler
has the lock taken, this operation it will have to wait for the handler
to finish.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
There's currently not a lot of action happening during
the init/destroy of MR resources. But more will be added
in the upcoming patches.
As the mr mutex lock init/destroy has been moved to these
new functions, the lifetime has now shifted away from
mlx5_vdpa_alloc_resources() / mlx5_vdpa_free_resources()
into these new functions. However, the lifetime at the
outer scope remains the same:
mlx5_vdpa_dev_add() / mlx5_vdpa_dev_free()
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that the mr resources have their own namespace in the
struct, give the lock a clearer name.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Group all mapping related resources into their own structure.
Upcoming patches will add more members in this new structure.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
A followup patch will use this name for something else.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use the async interface to issue MTT MKEY deletion.
This makes destroy_user_mr() on average 8x times faster.
This number is also dependent on the size of the MR being
deleted.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use the async interface to issue MTT MKEY creation.
Extra care is taken at the allocation of FW input commands
due to the MTT tables having variable sizes depending on
MR.
The indirect MKEY is still created synchronously at the
end as the direct MKEYs need to be filled in.
This makes create_user_mr() 3-5x faster, depending on
the size of the MR.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
There is no caller and implementation in tree.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Message-Id: <20240819140930.122019-1-yuehaibing@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@kernel.org>
Reviewed-by: Shannon Nelson <<a href="mailto:shannon.nelson@amd.com" target="_blank">shannon.nelson@amd.com</a>><br>
Reviewed-by: Zhu Lingshan <lingshan.zhu@kernel.org>
|
|
change_num_qps() is still suspending/resuming VQs one by one.
This change switches to parallel suspend/resume.
When increasing the number of queues the flow has changed a bit for
simplicity: the setup_vq() function will always be called before
resume_vqs(). If the VQ is initialized, setup_vq() will exit early. If
the VQ is not initialized, setup_vq() will create it and resume_vqs()
will resume it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-11-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
change_num_qps() has a lot of multiplications by 2 to convert
the number of VQ pairs to number of VQs. This patch simplifies
the code by doing the VQP -> VQ count conversion at the beginning
in a variable.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-10-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Unregistering notifiers is a costly operation. Instead of removing
the notifiers during device suspend and adding them back at resume,
simply ignore the call when the device is suspended.
At resume time call queue_link_work() to make sure that the device state
is propagated in case there were changes.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~13 ms to ~2.5 ms.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Currently device resume works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device resume.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device resume time is reduced from
~16 ms to ~4.5 ms.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Currently device suspend works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device suspend:
1) Suspend all active vqs parallel.
2) Query suspended vqs in parallel.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~37 ms to ~13 ms.
A later patch will remove the link unregister operation which will make
it even faster.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
