| Age | Commit message (Collapse) | Author |
|---|
|
The ARM MHUv3 controller is only present on ARM64 SoCs. Hence add a
dependency on ARM64, to prevent asking the user about this driver when
configuring a kernel for a different architecture than ARM64.
Fixes: ca1a8680b134b5e6 ("mailbox: arm_mhuv3: Add driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The commit introducing the Frida display started to write the
SETVCMOFF registers unconditionally, and some (not all!) Hydis
display seem to be affected by ghosting after the commit.
Make SETVCMOFF optional and only send these commands on the
Frida display for now.
Reported-by: Stefan Hansson <newbyte@postmarketos.org>
Fixes: 219a1f49094f ("drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK")
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Stefan Hansson <newbyte@postmarketos.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908-fix-nt35510-v2-1-d4834b9cdb9b@linaro.org
|
|
Commit b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu") switched
to use direct calls to dma-iommu, but missed the dma_vmap_noncontiguous,
dma_vunmap_noncontiguous and dma_mmap_noncontiguous behavior keyed off the
presence of the alloc_noncontiguous method.
Fix this by removing the now unused alloc_noncontiguous and
free_noncontiguous methods and moving the vmapping and mmaping of the
noncontiguous allocations into the iommu code, as it is the only provider
of actually noncontiguous allocations.
Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu")
Reported-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Xi Ruoyao <xry111@xry111.site>
|
|
When drm/bridge-connector was moved to DRM_DISPLAY_HELPER not all
users were updated. Add missing Kconfig selections.
Fixes: 9da7ec9b19d8 ("drm/bridge-connector: move to DRM_DISPLAY_HELPER module")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906063857.2223442-1-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add quirk orientation for AYA NEO GEEK. The name appears without
spaces in DMI strings. The board name is completely different to
the previous models making it difficult to reuse their quirks
despite being the same resolution and using the same orientation.
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/40350b0d63fe2b54e7cba1e14be50917203f0079.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add quirk orientation for AYA NEO Founder. The name appears with spaces in
DMI strings as other devices of the brand. The panel is the same as the
NEXT and 2021 models. Those could not be reused as the former has VENDOR
name as "AYANEO" without spaces and the latter has "AYADEVICE".
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f71889a0b39f13f4b78481bd030377ca15035680.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add quirk orientation for AYA NEO 2. The name appears without spaces in
DMI strings. That made it difficult to reuse the 2021 match. Also the
display is larger in resolution.
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2b35545b77a9fd8c9699b751ca282226dcecb1dd.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Variable en_dev is not effectively used, so delete it.
drivers/infiniband/hw/bnxt_re/main.c:1980:22: warning: variable ‘en_dev’ set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10867
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://patch.msgid.link/20240918021632.36091-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920153430.503212-12-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Avoid requiring MODULE_ALIASES by declaring proper device id tables.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20240918212159.1191637-1-andreas@kemnade.info
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The m48t59 leap year calculation will fail in 2100
Link: https://lore.kernel.org/r/20240911224836.1571831-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all clk drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
clk-next
* clk-devm:
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
* clk-samsung:
clk: samsung: add top clock support for ExynosAuto v920 SoC
clk: samsung: clk-pll: Add support for pll_531x
dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings
clk: samsung: exynos7885: Add USB related clocks to CMU_FSYS
clk: samsung: clk-pll: Add support for pll_1418x
clk: samsung: exynosautov9: add dpum clock support
dt-bindings: clock: exynosautov9: add dpum clock
clk: samsung: exynos7885: Add missing MUX clocks from PLLs in CMU_TOP
clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix
dt-bindings: clock: exynos7885: Add indices for USB clocks
dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices
dt-bindings: clock: exynos7885: Fix duplicated binding
clk: samsung: exynos850: Add TMU clock
dt-bindings: clock: exynos850: Add TMU clock
* clk-rockchip:
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
dt-bindings: clock: rockchip: remove CLK_NR_CLKS and CLKPMU_NR_CLKS
clk: rockchip: rk3399: Drop CLK_NR_CLKS CLKPMU_NR_CLKS usage
clk: rockchip: rk3368: Drop CLK_NR_CLKS usage
clk: rockchip: rk3328: Drop CLK_NR_CLKS usage
clk: rockchip: rk3308: Drop CLK_NR_CLKS usage
clk: rockchip: rk3288: Drop CLK_NR_CLKS usage
clk: rockchip: rk3228: Drop CLK_NR_CLKS usage
clk: rockchip: rk3036: Drop CLK_NR_CLKS usage
clk: rockchip: px30: Drop CLK_NR_CLKS CLKPMU_NR_CLKS usage
clk: rockchip: Set parent rate for DCLK_VOP clock on RK3228
* clk-qcom: (47 commits)
clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's
clk: qcom: dispcc-sm8250: use special function for Lucid 5LPE PLL
clk: qcom: dispcc-sm8250: use CLK_SET_RATE_PARENT for branch clocks
clk: qcom: ipq5332: Use icc-clk for enabling NoC related clocks
clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src
dt-bindings: usb: qcom,dwc3: Update ipq5332 clock details
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
clk: qcom: gcc-msm8998: Add Q6 BIMC and LPASS core, ADSP SMMU clocks
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
clk: qcom: Fix SM_CAMCC_8150 dependencies
clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src
clk: qcom: gcc-sc8180x: Fix the sdcc2 and sdcc4 clocks freq table
clk: qcom: gcc-sc8180x: Add GPLL9 support
dt-bindings: clock: qcom: Add GPLL9 support on gcc-sc8180x
clk: qcom: gcc-sc8180x: Register QUPv3 RCGs for DFS on sc8180x
clk: qcom: clk-rpmh: Fix overflow in BCM vote
dt-bindings: clock: qcom: Drop required-opps in required on SM8650 camcc
dt-bindings: clock: qcom: Drop required-opps in required on sm8650 videocc
dt-bindings: clock: qcom,qcs404-turingcc: convert to dtschema
dt-bindings: clock: Add x1e80100 LPASSCC reset controller
...
|
|
* clk-amlogic:
clk: meson: introduce symbol namespace for amlogic clocks
clk: meson: axg-audio: add sm1 earcrx clocks
clk: meson: axg-audio: setup regmap max_register based on the SoC
dt-bindings: clock: axg-audio: add earcrx clock ids
clk: meson: s4: pll: Constify struct regmap_config
clk: meson: s4: peripherals: Constify struct regmap_config
clk: meson: c3: pll: Constify struct regmap_config
clk: meson: c3: peripherals: Constify struct regmap_config
clk: meson: a1: pll: Constify struct regmap_config
clk: meson: a1: peripherals: Constify struct regmap_config
* clk-microchip:
clk: at91: sama7g5: Allocate only the needed amount of memory for PLLs
clk: at91: sam9x7: add sam9x7 pmc driver
dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT
clk: at91: sama7g5: move mux table macros to header file
clk: at91: sam9x7: add support for HW PLL freq dividers
clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs
dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller
dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7
* clk-imx: (27 commits)
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
clk: imx: composite-7ulp: Use NULL instead of 0
clk: imx: add missing MODULE_DESCRIPTION() macros
clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate
clk: imx: fracn-gppll: update rate table
clk: imx: imx8qxp: Parent should be initialized earlier than the clock
clk: imx: imx8qxp: Register dc0_bypass0_clk before disp clk
clk: imx: imx8qxp: Add clock muxes for MIPI and PHY ref clocks
clk: imx: imx8qxp: Add LVDS bypass clocks
clk: imx: imx8mm: Change the 'nand_usdhc_bus' clock to non-critical one
clk: imx: imx8mn: add sai7_ipg_clk clock settings
clk: imx: add CLK_SET_RATE_PARENT for lcdif_pixel_src for i.MX7D
clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D
clk: imx: imx8mp: fix clock tree update of TF-A managed clocks
clk: imx: fracn-gppll: fix fractional part of PLL getting lost
clk: imx: composite-7ulp: Check the PCC present bit
...
|
|
* clk-assigned-rates:
clk: clk-conf: support assigned-clock-rates-u64
* clk-renesas: (34 commits)
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
dt-bindings: clock: renesas,cpg-clocks: Add top-level constraints
clk: renesas: r8a779h0: Add CANFD clock
clk: renesas: Add RZ/V2H(P) CPG driver
clk: renesas: Add family-specific clock driver for RZ/V2H(P)
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
clk: renesas: r8a779h0: Add PWM clock
dt-bindings: clock: renesas,cpg-mssr: Document RZ/G2M v3.0 (r8a774a3) clock
clk: renesas: rcar-gen4: Remove unused default PLL2/3/4/6 configs
clk: renesas: rcar-gen4: Remove unused fixed PLL clock types
clk: renesas: rcar-gen4: Remove unused variable PLL2 clock type
clk: renesas: r8a779h0: Model PLL1/2/3/4/6 as fractional PLLs
clk: renesas: r8a779g0: Model PLL1/3/4/6 as fractional PLLs
clk: renesas: r8a779f0: Model PLL1/2/3/6 as fractional PLLs
clk: renesas: r8a779a0: Use defines for PLL control registers
clk: renesas: rcar-gen4: Add support for fractional 9.24 PLLs
clk: renesas: rcar-gen4: Add support for fixed variable PLLs
clk: renesas: rcar-gen4: Add support for variable fractional PLLs
...
* clk-scmi:
clk: scmi: add is_prepared hook
|
|
into clk-next
- KUnit tests for clk registration and fixed rate basic clk type
* clk-kunit:
clk: Add KUnit tests for clks registered with struct clk_parent_data
clk: Add KUnit tests for clk fixed rate basic type
clk: Add test managed clk provider/consumer APIs
platform: Add test managed platform_device/driver APIs
of: Add a KUnit test for overlays and test managed APIs
dt-bindings: vendor-prefixes: Add "test" vendor for KUnit and friends
of: Add test managed wrappers for of_overlay_apply()/of_node_put()
of/platform: Allow overlays to create platform devices from the root node
* clk-mediatek:
dt-bindings: clock: mediatek: Convert MediaTek clock syscons to schema
dt-bindings: Move Mediatek clock controllers to "clock" directory
dt-bindings: clock: mediatek,apmixedsys: Fix "mediatek,mt6779-apmixed" compatible
clk: mediatek: reset: Remove unused mtk_register_reset_controller()
clk: mediatek: reset: Return regmap's error code
* clk-cleanup:
clk: starfive: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
clk: ti: dra7-atl: Fix leak of of_nodes
clk:davinci: make use of dev_err_cast_probe()
clk: bcm: bcm53573: fix OF node leak in init
clk: lmk04832: Use devm_clk_get_enabled() helpers
clk: visconti: Switch to use kmemdup_array()
clk: mmp: Switch to use kmemdup_array()
clk: hisilicon: Remove unnecessary local variable
clk: use clk_core_unlink_consumer() helper
clk: Use of_property_present()
clk: at91: Use of_property_count_u32_elems() to get property length
da8xx-cfgchip.c: replace of_node_put with __free improves cleanup
* clk-bindings:
dt-bindings: clock: st,stm32mp1-rcc: add top-level constraints
dt-bindings: clock: cirrus,lochnagar: add top-level constraints
dt-bindings: clock: baikal,bt1-ccu-div: add top-level constraints
dt-bindings: clock: nxp,lpc3220-usb-clk: Convert bindings to dtschema
dt-bindings: clock: nxp,lpc3220-clk: Convert bindings to DT schema
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 47b1be5c0f4e ("staging: imx/drm: request irq only after adding the crtc")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-4-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-3-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-2-ruanjinjie@huawei.com
[DB: fixed the subject]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext support from Tejun Heo:
"This implements a new scheduler class called ‘ext_sched_class’, or
sched_ext, which allows scheduling policies to be implemented as BPF
programs.
The goals of this are:
- Ease of experimentation and exploration: Enabling rapid iteration
of new scheduling policies.
- Customization: Building application-specific schedulers which
implement policies that are not applicable to general-purpose
schedulers.
- Rapid scheduler deployments: Non-disruptive swap outs of scheduling
policies in production environments"
See individual commits for more documentation, but also the cover letter
for the latest series:
Link: https://lore.kernel.org/all/20240618212056.2833381-1-tj@kernel.org/
* tag 'sched_ext-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (110 commits)
sched: Move update_other_load_avgs() to kernel/sched/pelt.c
sched_ext: Don't trigger ops.quiescent/runnable() on migrations
sched_ext: Synchronize bypass state changes with rq lock
scx_qmap: Implement highpri boosting
sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()
sched_ext: Compact struct bpf_iter_scx_dsq_kern
sched_ext: Replace consume_local_task() with move_local_task_to_local_dsq()
sched_ext: Move consume_local_task() upward
sched_ext: Move sanity check and dsq_mod_nr() into task_unlink_from_dsq()
sched_ext: Reorder args for consume_local/remote_task()
sched_ext: Restructure dispatch_to_local_dsq()
sched_ext: Fix processs_ddsp_deferred_locals() by unifying DTL_INVALID handling
sched_ext: Make find_dsq_for_dispatch() handle SCX_DSQ_LOCAL_ON
sched_ext: Refactor consume_remote_task()
sched_ext: Rename scx_kfunc_set_sleepable to unlocked and relocate
sched_ext: Add missing static to scx_dump_data
sched_ext: Add missing static to scx_has_op[]
sched_ext: Temporarily work around pick_task_scx() being called without balance_scx()
sched_ext: Add a cgroup scheduler which uses flattened hierarchy
sched_ext: Add cgroup support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Optimize ftrace and kprobes code patching and avoid stop machine for
kprobes if sequential instruction fetching facility is available
- Add hiperdispatch feature to dynamically adjust CPU capacity in
vertical polarization to improve scheduling efficiency and overall
performance. Also add infrastructure for handling warning track
interrupts (WTI), allowing for graceful CPU preemption
- Rework crypto code pkey module and split it into separate,
independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules
to load only when the relevant hardware is available
- Add hardware acceleration for HMAC modes and the full AES-XTS cipher,
utilizing message-security assist extensions (MSA) 10 and 11. It
introduces new shash implementations for HMAC-SHA224/256/384/512 and
registers the hardware-accelerated AES-XTS cipher as the preferred
option. Also add clear key token support
- Add MSA 10 and 11 processor activity instrumentation counters to perf
and update PAI Extension 1 NNPA counters
- Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE
statements
- Add support for SHA3 performance enhancements introduced with MSA 12
- Add support for the query authentication information feature of MSA
13 and introduce the KDSA CPACF instruction. Provide query and query
authentication information in sysfs, enabling tools like cpacfinfo to
present this data in a human-readable form
- Update kernel disassembler instructions
- Always enable EXPOLINE_EXTERN if supported by the compiler to ensure
kpatch compatibility
- Add missing warning handling and relocated lowcore support to the
early program check handler
- Optimize ftrace_return_address() and avoid calling unwinder
- Make modules use kernel ftrace trampolines
- Strip relocs from the final vmlinux ELF file to make it roughly 2
times smaller
- Dump register contents and call trace for early crashes to the
console
- Generate ptdump address marker array dynamically
- Fix rcu_sched stalls that might occur when adding or removing large
amounts of pages at once to or from the CMM balloon
- Fix deadlock caused by recursive lock of the AP bus scan mutex
- Unify sync and async register save areas in entry code
- Cleanup debug prints in crypto code
- Various cleanup and sanitizing patches for the decompressor
- Various small ftrace cleanups
* tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits)
s390/crypto: Display Query and Query Authentication Information in sysfs
s390/crypto: Add Support for Query Authentication Information
s390/crypto: Rework RRE and RRF CPACF inline functions
s390/crypto: Add KDSA CPACF Instruction
s390/disassembler: Remove duplicate instruction format RSY_RDRU
s390/boot: Move boot_printk() code to own file
s390/boot: Use boot_printk() instead of sclp_early_printk()
s390/boot: Rename decompressor_printk() to boot_printk()
s390/boot: Compile all files with the same march flag
s390: Use MARCH_HAS_*_FEATURES defines
s390: Provide MARCH_HAS_*_FEATURES defines
s390/facility: Disable compile time optimization for decompressor code
s390/boot: Increase minimum architecture to z10
s390/als: Remove obsolete comment
s390/sha3: Fix SHA3 selftests failures
s390/pkey: Add AES xts and HMAC clear key token support
s390/cpacf: Add MSA 10 and 11 new PCKMO functions
s390/mm: Add cond_resched() to cmm_alloc/free_pages()
s390/pai_ext: Update PAI extension 1 counters
s390/pai_crypto: Add support for MSA 10 and 11 pai counters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.
The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.
Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.
Follows the list of the rest of the changes grouped by type of
change.
Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.
The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.
The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.
Constified a few global data structures in the virtio driver.
The Renesas driver simplifies the bus speed handling in the init
function making it more readable.
Improved an if/else statement in probe function of the Renesas
R-Car driver.
The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().
Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.
Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.
Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.
Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.
The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.
In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.
New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.
New support
-----------
Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.
Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.
Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.
The i2c-sprd binding has been converted to YAML.
|
|
Because hardware will read in multiples of 4 SG entries, ensure
the allocated length is always padded. This was already done
by some callers of ahash_edesc_alloc, but ahash_digest was conspicuously
missing.
In any case, doing it in the allocation function ensures that the
memory is always there.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: a5e5c13398f3 ("crypto: caam - fix S/G table passing page boundary")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Modify device_shutdown() so that supplier devices do not wait for
consumer devices to be shut down first when the devlink is sync state
only, since the consumer is not dependent on the supplier in this case.
Without this change, a circular dependency could hang the system.
Fixes: 8064952c6504 ("driver core: shut down devices asynchronously")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240919043143.1194950-1-stuart.w.hayes@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When invoke memfd_pin_folios, we need offer an array to save each folio
which we pinned.
The current way is dynamic alloc an array(use kvmalloc), get folios,
save into udmabuf and then free.
Depend on the size, kvmalloc can do something different:
Below PAGE_SIZE, slab allocator will be used, which have good alloc
performance, due to it cached page.
PAGE_SIZE - PCP Order, PCP(per-cpu-pageset) also given buddy page a
cache in each CPU, so different CPU no need to hold some lock(zone or
some) to get the locally page. If PCP cached page, the access also fast.
PAGE_SIZE - BUDDY_MAX, try to get page from buddy, due to kvmalloc adjusted
the gfp flags, if zone freelist can't alloc page(fast path), we will not
enter slowpath to reclaim memory. Due to need hold lock and check, may
slow, but still fast than vmalloc.
Anything wrong will fallback into vmalloc to alloc memory, it obtains
contiguous virtual addresses by loop alloc order 0 page(PAGE_SIZE), and
then map it into vmalloc area. If necessary, page alloc may enter
slowpath to reclaim memory. Hence, if fallback into vmalloc, it's slow.
When create, we need to iter each udmabuf item, then pin it's range
folios, if each item's range folio's count is large, we may fallback each
into vmalloc.
This patch find the largest range folio in items, then alloc this size's
folio array. When pin range folios, reuse this array.
Signed-off-by: Huan Yang <link@vivo.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918025238.2957823-8-link@vivo.com
|
|
Currently, udmabuf handles folio by create an unpin list to record
each folio obtained from the list and unpinning them when released. To
maintain this, many struct have been established.
However, maintain this requires a significant amount of memory and
iter the list is a substantial overhead, which is not friendly to the
CPU cache.
When create, we arranged the folio array in the order of pin and set
the offset according to pgcnt. So, if record each pinned folio when
create, then can easy unpin it. Compare to use list to record it,
an array also can do this.
Hence, this patch setup a pinned_folios array(size is the pgcnt) to
instead of udmabuf_folio struct, it record each folio which pinned when
invoke memfd_pin_folios, then unpin folio by iter pinned_folios.
Note that, since a folio may be pinned multiple times, each folio can be
added to pinned_folios multiple times, depend on how many times the
folio has been pinned when create.
Compare to udmabuf_folio(24 byte size), a folio pointer is 8 byte, if no
large folio - each folio is PAGE_SIZE - and need to unpin when release.
So need to record each folio, by this patch, each folio can save 16 byte.
But if large folio used, depend on the large folio's number, the
pinned_folios array may take more memory, but it still can makes unpin
access more cache-friendly.
Signed-off-by: Huan Yang <link@vivo.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918025238.2957823-7-link@vivo.com
|
|
After udmabuf is allocated, its resources need to be initialized,
including various array structures. The current array structure has
already been greatly expanded.
Also, before udmabuf needs to be kfree, the occupied resources need to
be released.
This part is repetitive and maybe overlooked.
This patch give a helper function when init and deinit, by this,
reduce duplicate code.
Signed-off-by: Huan Yang <link@vivo.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918025238.2957823-6-link@vivo.com
|
|
This patch aim to simplify the memfd folio pin during the udmabuf
create. No functional changes.
This patch create a udmabuf_pin_folios function, in this, do the memfd
pin folio and then record each pinned folio, offset.
This patch simplify the pinned folio record, iter by each pinned folio,
and then record each offset in it.
Compare to iter by pgcnt, more readable.
Suggested-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Huan Yang <link@vivo.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918025238.2957823-5-link@vivo.com
|
|
Currently vmap_udmabuf set page's array by each folio.
But, ubuf->folios is only contain's the folio's head page.
That mean we repeatedly mapped the folio head page to the vmalloc area.
Due to udmabuf can use hugetlb, if HVO enabled, tail page may not exist,
so, we can't use page array to map, instead, use pfn array.
By this, we removed page usage in udmabuf totally.
Fixes: 5e72b2b41a21 ("udmabuf: convert udmabuf driver to use folios")
Suggested-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Huan Yang <link@vivo.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918025238.2957823-4-link@vivo.com
|
|
When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine,
page_alloc only support 4MB.
If above this, trigger this warn and return NULL.
udmabuf can change size limit, if change it to 3072(3GB), and then alloc
3GB udmabuf, will fail create.
[ 4080.876581] ------------[ cut here ]------------
[ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350
[ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350
[ 4080.879470] Call Trace:
[ 4080.879473] <TASK>
[ 4080.879473] ? __alloc_pages+0x2c8/0x350
[ 4080.879475] ? __warn.cold+0x8e/0xe8
[ 4080.880647] ? __alloc_pages+0x2c8/0x350
[ 4080.880909] ? report_bug+0xff/0x140
[ 4080.881175] ? handle_bug+0x3c/0x80
[ 4080.881556] ? exc_invalid_op+0x17/0x70
[ 4080.881559] ? asm_exc_invalid_op+0x1a/0x20
[ 4080.882077] ? udmabuf_create+0x131/0x400
Because MAX_PAGE_ORDER, kmalloc can max alloc 4096 * (1 << 10), 4MB
memory, each array entry is pointer(8byte), so can save 524288 pages(2GB).
Further more, costly order(order 3) may not be guaranteed that it can be
applied for, due to fragmentation.
This patch change udmabuf array use kvmalloc_array, this can fallback
alloc into vmalloc, which can guarantee allocation for any size and does
not affect the performance of kmalloc allocations.
Signed-off-by: Huan Yang <link@vivo.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918025238.2957823-3-link@vivo.com
|
|
The current udmabuf mmap only fills the physical memory to the
corresponding virtual address when the user actually accesses the
virtual address.
However, the current udmabuf has already obtained and pinned the folio
upon completion of the creation.This means that the physical memory has
already been acquired, rather than being accessed dynamically.
As a result, the page fault has lost its purpose as a demanding
page. Due to the fact that page fault requires trapping into kernel mode
and filling in when accessing the corresponding virtual address in mmap,
when creating a large size udmabuf, this represents a considerable
overhead.
This patch fill the pfn into page table, and then pre-fault each pfn
into vma, when first access.
Notice, if anything wrong , we do not return an error during this
pre-fault step. However, an error will be returned if the failure occurs
when the addr is truly accessed
Suggested-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Huan Yang <link@vivo.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918025238.2957823-2-link@vivo.com
|
|
Physical addresses under IOVA on x86 platform are mapped contiguously
as a side effect before the patch that removed CONFIG_DMA_REMAP. The
NTB rx buffer ring is a single chunk DMA buffer that is allocated
against the NTB PCI device. If the receive side is using a DMA device,
then the buffers are remapped against the DMA device before being
submitted via the dmaengine API. This scheme becomes a problem when
the physical memory is discontiguous. When dma_map_page() is called
on the kernel virtual address from the dma_alloc_coherent() call, the
new IOVA mapping no longer points to all the physical memory allocated
due to being discontiguous. Change dma_alloc_coherent() to dma_alloc_attrs()
in order to force DMA_ATTR_FORCE_CONTIGUOUS attribute. This is the best
fix for the circumstance. A potential future solution may be having the DMA
mapping API providing a way to alias an existing IOVA mapping to a new
device perhaps.
This fix is not to fix the patch pointed to by the fixes tag, but to fix
the issue arised in the ntb_transport driver on x86 platforms after the
said patch is applied.
Reported-by: Jerry Dai <jerry.dai@intel.com>
Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP")
Tested-by: Jerry Dai <jerry.dai@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
switchtec_ntb_remove due to race condition
In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.
If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through kfree(sndev), while the work
mentioned above will be used. The sequence of operations that may lead
to a UAF bug is as follows:
CPU0 CPU1
| check_link_status_work
switchtec_ntb_remove |
kfree(sndev); |
| if (sndev->link_force_down)
| // use sndev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in switchtec_ntb_remove.
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The word 'swtich' is wrong, so fix it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Use "/*" instead of "/**" for common C comments to prevent warnings
from scripts/kernel-doc.
ntb_hw_epf.c:15: warning: expecting prototype for Host side endpoint driver to implement Non(). Prototype was for NTB_EPF_COMMAND() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: ntb@lists.linux.dev
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Fix all kernel-doc warnings in ntb_transport.c.
The function parameters for ntb_transport_create_queue() changed, so
update them in the kernel-doc comments.
Add a Returns: comment for ntb_transport_register_client_dev().
ntb_transport.c:382: warning: No description found for return value of 'ntb_transport_register_client_dev'
ntb_transport.c:1984: warning: Excess function parameter 'rx_handler' description in 'ntb_transport_create_queue'
ntb_transport.c:1984: warning: Excess function parameter 'tx_handler' description in 'ntb_transport_create_queue'
ntb_transport.c:1984: warning: Excess function parameter 'event_handler' description in 'ntb_transport_create_queue'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: ntb@lists.linux.dev
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
'struct bus_type' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
69682 4593 152 74427 122bb drivers/ntb/ntb_transport.o
5847 448 32 6327 18b7 drivers/ntb/core.o
After:
=====
text data bss dec hex filename
69858 4433 152 74443 122cb drivers/ntb/ntb_transport.o
6007 288 32 6327 18b7 drivers/ntb/core.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The correct printk format is %pa or %pap, but not %pa[p].
Fixes: 99a06056124d ("NTB: ntb_perf: Fix address err in perf_copy_chunk")
Signed-off-by: Max Hawking <maxahawking@sonnenkinder.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The debugfs_create_dir() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The SBI v2.0 specification pointed to by the link below reserves the
event code 0xffff for platform specific firmware events. Update the driver
to be able to parse and program such events. The platform specific
firmware events must now be specified in the perf command as below:
perf stat -e rCxxx ...
where bits[63:62] = 0x3 of the event config indicate a platform specific
firmware event and xxx indicate the actual event code which is passed
as the event data.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/v2.0/riscv-sbi.pdf
Link: https://lore.kernel.org/r/20240812051109.6496-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Previously the MR and SCR registers were just set with the supposedly
required values, from cached register values (cached reg content
initialized to zero).
All parts fixed here did not consider the current register (cache)
content, which would make future support of cs_setup, cs_hold, and
cs_inactive impossible.
Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from
atmel_qspi_set_cs_timing(). The DLYBS setting is applied by ORing over
the current setting, without resetting the bits first. All writes to MR
did not consider possible settings of DLYCS and DLYBCT.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Fixes: f732646d0ccd ("spi: atmel-quadspi: Add support for configuring CS timing")
Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Prepare input updates for 6.12 merge window.
|
|
During adp5588_setup(), we read all the events to clear the event FIFO.
However, adp5588_read() just calls i2c_smbus_read_byte_data() which
returns the byte read in case everything goes well. Hence, we need to
explicitly check for a negative error code instead of checking for
something different than 0.
Fixes: e960309ce318 ("Input: adp5588-keys - bail out on returned error")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Current upstream driver reports errors running mtd_oobtest kernel module
test:
root@OpenWrt:/# insmod mtd_test.ko
root@OpenWrt:/# insmod mtd_oobtest.ko dev=5
[ 7023.730584] =================================================
[ 7023.736399] mtd_oobtest: MTD device: 5
[ 7023.740160] mtd_oobtest: MTD device size 3670016, eraseblock size 131072, page size 2048, count of eraseblocks 28, pages per eraseblock 64, OOB size 128
[ 7023.753837] mtd_test: scanning for bad eraseblocks
[ 7023.758636] mtd_test: scanned 28 eraseblocks, 0 are bad
[ 7023.763861] mtd_oobtest: test 1 of 5
[ 7024.042076] mtd_oobtest: writing OOBs of whole device
[ 7024.682069] mtd_oobtest: written up to eraseblock 0
[ 7041.962077] mtd_oobtest: written 28 eraseblocks
[ 7041.966626] mtd_oobtest: verifying all eraseblocks
[ 7041.972276] mtd_oobtest: error @addr[0x0:0x0] 0xff -> 0xe diff 0xf1
[ 7041.978550] mtd_oobtest: error @addr[0x0:0x1] 0xff -> 0x10 diff 0xef
[ 7041.984932] mtd_oobtest: error @addr[0x0:0x2] 0xff -> 0x82 diff 0x7d
[ 7041.991293] mtd_oobtest: error @addr[0x0:0x3] 0xff -> 0x10 diff 0xef
[ 7041.997659] mtd_oobtest: error @addr[0x0:0x4] 0xff -> 0x0 diff 0xff
[ 7042.003942] mtd_oobtest: error @addr[0x0:0x5] 0xff -> 0x8a diff 0x75
[ 7042.010294] mtd_oobtest: error @addr[0x0:0x6] 0xff -> 0x20 diff 0xdf
[ 7042.016659] mtd_oobtest: error @addr[0x0:0x7] 0xff -> 0x1 diff 0xfe
[ 7042.022935] mtd_oobtest: error @addr[0x0:0x8] 0xff -> 0x2e diff 0xd1
[ 7042.029295] mtd_oobtest: error @addr[0x0:0x9] 0xff -> 0x40 diff 0xbf
[ 7042.035661] mtd_oobtest: error @addr[0x0:0xa] 0xff -> 0x0 diff 0xff
[ 7042.041935] mtd_oobtest: error @addr[0x0:0xb] 0xff -> 0x89 diff 0x76
[ 7042.048300] mtd_oobtest: error @addr[0x0:0xc] 0xff -> 0x82 diff 0x7d
[ 7042.054662] mtd_oobtest: error @addr[0x0:0xd] 0xff -> 0x15 diff 0xea
[ 7042.061014] mtd_oobtest: error @addr[0x0:0xe] 0xff -> 0x90 diff 0x6f
[ 7042.067380] mtd_oobtest: error @addr[0x0:0xf] 0xff -> 0x0 diff 0xff
....
[ 7432.421369] mtd_oobtest: error @addr[0x237800:0x36] 0xff -> 0x5f diff 0xa0
[ 7432.428242] mtd_oobtest: error @addr[0x237800:0x37] 0xff -> 0x21 diff 0xde
[ 7432.435118] mtd_oobtest: error: verify failed at 0x237800
[ 7432.440510] mtd_oobtest: error: too many errors
[ 7432.445053] mtd_oobtest: error -1 occurred
The above errors are due to the buggy logic in the 'read cache' available
in airoha_snand_dirmap_read() routine since there are some corner cases
where we are missing data updates. Since we do not get any read/write speed
improvement using the cache (according to the mtd_speedtest kernel
module test), in order to fix the mtd_oobtest test, remove the 'read cache'
in airoha_snand_dirmap_read routine. Now the driver is passing all the
tests available in mtd_test suite.
Fixes: a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240919-airoha-spi-fixes-v2-1-cb0f0ed9920a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dma_fence_begin_signalling()
Condsider the following call sequence:
/* Upper layer */
dma_fence_begin_signalling();
lock(tainted_shared_lock);
/* Driver callback */
dma_fence_begin_signalling();
...
The driver might here use a utility that is annotated as intended for the
dma-fence signalling critical path. Now if the upper layer isn't correctly
annotated yet for whatever reason, resulting in
/* Upper layer */
lock(tainted_shared_lock);
/* Driver callback */
dma_fence_begin_signalling();
We will receive a false lockdep locking order violation notification from
dma_fence_begin_signalling(). However entering a dma-fence signalling
critical section itself doesn't block and could not cause a deadlock.
So use a successful read_trylock() annotation instead for
dma_fence_begin_signalling(). That will make sure that the locking order
is correctly registered in the first case, and doesn't register any
locking order in the second case.
The alternative is of course to make sure that the "Upper layer" is always
correctly annotated. But experience shows that's not easily achievable
in all cases.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428125233.228353-1-thomas.hellstrom@linux.intel.com
|
|
- Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer
dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release()
(Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
* pci/misc:
PCI: Fix typos
PCI/VPD: Remove pci_vpd_release() unused declarations
PCI/PM: Remove __pci_pme_wakeup() unused declarations
PCI: Make pci_bus_type constant
x86/PCI: Check pcie_find_root_port() return for NULL
|
|
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but
does provide ACS-like features (Subramanian Ananthanarayanan)
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
* pci/quirks:
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
PCI: Add ACS quirk for Qualcomm SA8775P
|
|
- Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to
be lost or delivered as the wrong interrupt (Sean Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding
and xilinx-dma-pl driver (Thippeswamy Havalige)
* pci/controller/xilinx:
PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge
arm64: zynqmp: Add PCIe phys property for ZCU102
PCI: xilinx-nwl: Add PHY support
dt-bindings: pci: xilinx-nwl: Add phys property
PCI: xilinx-nwl: Clean up clock on probe failure/removal
PCI: xilinx-nwl: Rate-limit misc interrupt messages
PCI: xilinx-nwl: Fix register misspelling
PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler
|
