summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-01-25drm/msm/mdss: specify cfg bandwidth for SDM670Dmitry Baryshkov
Lower the requested CFG bus bandwidth for the SDM670 platform. The default value is 153600 kBps, which is twice as big as required by the platform according to the vendor kernel. Fixes: a55c8ff252d3 ("drm/msm/mdss: Handle the reg bus ICC path") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Richard Acayan <mailingradian@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/572182/ Link: https://lore.kernel.org/r/20231215013222.827975-1-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-01-25spi: fix finalize message on error returnDavid Lechner
In __spi_pump_transfer_message(), the message was not finalized in the first error return as it is in the other error return paths. Not finalizing the message could cause anything waiting on the message to complete to hang forever. This adds the missing call to spi_finalize_current_message(). Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd: Add a DC debug mask for IPSRoman Li
For debugging IPS-related issues, expose a new debug mask that allows to disable IPS. Usage: amdgpu.dcdebugmask=0x800 Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Replay + IPS + ABM in Full Screen VPBChunTao Tso
[Why] Because ABM will wait VStart to start getting histogram data, it will cause we can't enter IPS while full screnn video playing. [How] Modify the panel refresh rate to the maximun multiple of current refresh rate. Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Add IPS checks before dcn register accessRoman Li
[Why] With IPS enabled a system hangs once PSR is active. PSR active triggers transition to IPS2 state. While in IPS2 an access to dcn registers results in hard hang. Existing check doesn't cover for PSR sequence. [How] Safeguard register access by disabling idle optimization in atomic commit and crtc scanout. It will be re-enabled on next vblank. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Add Replay IPS register for DMUB command tableAlvin Lee
- Introduce a new Replay mode for DMUB version 0.0.199.0 Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Allow IPS2 during ReplayNicholas Kazlauskas
[Why & How] Add regkey to block video playback in IPS2 by default Allow idle optimizations in the same spot we allow Replay for video playback usecases. Avoid sending it when there's an external display connected by modifying the allow idle checks to check for active non-eDP screens. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/amdgpu: Assign GART pages to AMD device mappingTom St Denis
This allows kernel mapped pages like the PDB and PTB to be read via the iomem debugfs when there is no vram in the system. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amd/pm: Fetch current power limit from FWLijo Lazar
Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch the limit from firmware instead of using cached values. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amdgpu: Fix null pointer dereferenceHawking Zhang
amdgpu_reg_state_sysfs_fini could be invoked at the time when asic_func is even not initialized, i.e., amdgpu_discovery_init fails for some reason. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu: Show vram vendor only if availableLijo Lazar
Ony if vram vendor info is available, show in sysfs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amd/pm: update the power cap settingKenneth Feng
update the power cap setting for smu_v13.0.0/smu_v13.0.7 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu: Avoid fetching vram vendor informationLijo Lazar
For GFX 9.4.3 APUs, the current method of fetching vram vendor information is not reliable. Avoid fetching the information. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amdgpu/pm: Fix the power source flag errorMa Jun
The power source flag should be updated when [1] System receives an interrupt indicating that the power source has changed. [2] System resumes from suspend or runtime suspend Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() ↵Srinivasan Shanmugam
& write_dpcd()' functions The 'status' variable in 'core_link_read_dpcd()' & 'core_link_write_dpcd()' was uninitialized. Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'. drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'. Cc: stable@vger.kernel.org Cc: Jerry Zuo <jerry.zuo@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/pm: udpate smu v13.0.6 message permissionYang Wang
update smu v13.0.6 message to allow guest driver set gfx clock. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25Merge tag 'net-6.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter and WiFi. Jakub is doing a lot of work to include the self-tests in our CI, as a result a significant amount of self-tests related fixes is flowing in (and will likely continue in the next few weeks). Current release - regressions: - bpf: fix a kernel crash for the riscv 64 JIT - bnxt_en: fix memory leak in bnxt_hwrm_get_rings() - revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb" Previous releases - regressions: - core: fix removing a namespace with conflicting altnames - tc/flower: fix chain template offload memory leak - tcp: - make sure init the accept_queue's spinlocks once - fix autocork on CPUs with weak memory model - udp: fix busy polling - mlx5e: - fix out-of-bound read in port timestamping - fix peer flow lists corruption - iwlwifi: fix a memory corruption Previous releases - always broken: - netfilter: - nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain - nft_limit: reject configurations that cause integer overflow - bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a NULL pointer dereference upon shrinking - llc: make llc_ui_sendmsg() more robust against bonding changes - smc: fix illegal rmb_desc access in SMC-D connection dump - dpll: fix pin dump crash for rebound module - bnxt_en: fix possible crash after creating sw mqprio TCs - hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB Misc: - several self-tests fixes for better integration with the netdev CI - added several missing modules descriptions" * tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring tsnep: Remove FCS for XDP data path net: fec: fix the unhandled context fault from smmu selftests: bonding: do not test arp/ns target with mode balance-alb/tlb fjes: fix memleaks in fjes_hw_setup i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full net: fill in MODULE_DESCRIPTION()s for rvu_mbox net: fill in MODULE_DESCRIPTION()s for litex net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio net: fill in MODULE_DESCRIPTION()s for fec ...
2024-01-25Merge tag 'ffa-fixes-6.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FF-A fixes for v6.8 Quite a few fixes addressing issues around missing RW lock initialisation in ffa_setup_partitions(), missing check for xa_load() return value, use of xa_insert instead of xa_store to flag case of duplicate insertion. It also simplifies ffa_partitions_cleanup() with xa_for_each() and xa_erase() instead of xa_extract() and kfree(). Finally it includes fixes around handling of partitions setup failures during initialisation. * tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Handle partitions setup failures firmware: arm_ffa: Use xa_insert() and check for result firmware: arm_ffa: Simplify ffa_partitions_cleanup() firmware: arm_ffa: Check xa_load() return value firmware: arm_ffa: Add missing rwlock_init() for the driver partition firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions() Link: https://lore.kernel.org/r/20240122161652.3551159-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-01-25ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllersLennert Buytenhek
With one of the on-board ASM1061 AHCI controllers (1b21:0612) on an ASUSTeK Pro WS WRX80E-SAGE SE WIFI mainboard, a controller hang was observed that was immediately preceded by the following kernel messages: ahci 0000:28:00.0: Using 64-bit DMA addresses ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00000 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00300 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00380 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00400 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00680 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00700 flags=0x0000] The first message is produced by code in drivers/iommu/dma-iommu.c which is accompanied by the following comment that seems to apply: /* * Try to use all the 32-bit PCI addresses first. The original SAC vs. * DAC reasoning loses relevance with PCIe, but enough hardware and * firmware bugs are still lurking out there that it's safest not to * venture into the 64-bit space until necessary. * * If your device goes wrong after seeing the notice then likely either * its driver is not setting DMA masks accurately, the hardware has * some inherent bug in handling >32-bit addresses, or not all the * expected address bits are wired up between the device and the IOMMU. */ Asking the ASM1061 on a discrete PCIe card to DMA from I/O virtual address 0xffffffff00000000 produces the following I/O page faults: vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000000 flags=0x0010] vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000500 flags=0x0010] Note that the upper 21 bits of the logged DMA address are zero. (When asking a different PCIe device in the same PCIe slot to DMA to the same I/O virtual address, we do see all the upper 32 bits of the DMA address as 1, so this is not an issue with the chipset or IOMMU configuration on the test system.) Also, hacking libahci to always set the upper 21 bits of all DMA addresses to 1 produces no discernible effect on the behavior of the ASM1061, and mkfs/mount/scrub/etc work as without this hack. This all strongly suggests that the ASM1061 has a 43 bit DMA address limit, and this commit therefore adds a quirk to deal with this limit. This issue probably applies to (some of) the other supported ASMedia parts as well, but we limit it to the PCI IDs known to refer to ASM1061 parts, as that's the only part we know for sure to be affected by this issue at this point. Link: https://lore.kernel.org/linux-ide/ZaZ2PIpEId-rl6jv@wantstofly.org/ Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org> [cassel: drop date from error messages in commit log] Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-01-25tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ringGerhard Engleder
The fill ring of the XDP socket may contain not enough buffers to completey fill the RX queue during socket creation. In this case the flag XDP_RING_NEED_WAKEUP is not set as this flag is only set if the RX queue is not completely filled during polling. Set XDP_RING_NEED_WAKEUP flag also if RX queue is not completely filled during XDP socket creation. Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25tsnep: Remove FCS for XDP data pathGerhard Engleder
The RX data buffer includes the FCS. The FCS is already stripped for the normal data path. But for the XDP data path the FCS is included and acts like additional/useless data. Remove the FCS from the RX data buffer also for XDP. Fixes: 65b28c810035 ("tsnep: Add XDP RX support") Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25Merge tag 'mlx5-fixes-2024-01-24' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2024-01-24 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: fix a potential double-free in fs_any_create_groups net/mlx5e: fix a double-free in arfs_create_groups net/mlx5e: Ignore IPsec replay window values on sender side net/mlx5e: Allow software parsing when IPsec crypto is enabled net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASO net/mlx5: DR, Can't go to uplink vport on RX rule net/mlx5: DR, Use the right GVMI number for drop action net/mlx5: Bridge, fix multicast packets sent to uplink net/mlx5: Fix a WARN upon a callback command failure net/mlx5e: Fix peer flow lists handling net/mlx5e: Fix inconsistent hairpin RQT sizes net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context net/mlx5: Fix query of sd_group field net/mlx5e: Use the correct lag ports number when creating TISes ==================== Link: https://lore.kernel.org/r/20240124081855.115410-1-saeed@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25Merge tag 'for-netdev' of ↵Paolo Abeni
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-01-25 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 2 day(s) which contain a total of 13 files changed, 190 insertions(+), 91 deletions(-). The main changes are: 1) Fix bpf_xdp_adjust_tail() in context of XSK zero-copy drivers which support XDP multi-buffer. The former triggered a NULL pointer dereference upon shrinking, from Maciej Fijalkowski & Tirthendu Sarkar. 2) Fix a bug in riscv64 BPF JIT which emitted a wrong prologue and epilogue for struct_ops programs, from Pu Lehui. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full riscv, bpf: Fix unpredictable kernel crash about RV64 struct_ops ==================== Link: https://lore.kernel.org/r/20240125084416.10876-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25net: fec: fix the unhandled context fault from smmuShenwei Wang
When repeatedly changing the interface link speed using the command below: ethtool -s eth0 speed 100 duplex full ethtool -s eth0 speed 1000 duplex full The following errors may sometimes be reported by the ARM SMMU driver: [ 5395.035364] fec 5b040000.ethernet eth0: Link is Down [ 5395.039255] arm-smmu 51400000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x100001, cbfrsynra=0x852, cb=2 [ 5398.108460] fec 5b040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off It is identified that the FEC driver does not properly stop the TX queue during the link speed transitions, and this results in the invalid virtual I/O address translations from the SMMU and causes the context faults. Fixes: dbc64a8ea231 ("net: fec: move calls to quiesce/resume packet processing out of fec_restart()") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20240123165141.2008104-1-shenwei.wang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25accel/ivpu: Improve recovery and reset supportJacek Lawrynowicz
- Synchronize job submission with reset/recovery using reset_lock - Always print recovery reason and call diagnose_failure() - Don't allow for autosupend during recovery - Prevent immediate autosuspend after reset/recovery - Prevent force_recovery for issuing TDR when device is suspended - Reset VPU instead triggering recovery after changing debugfs params Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-4-jacek.lawrynowicz@linux.intel.com
2024-01-25accel/ivpu: Improve stability of ivpu_submit_ioctl()Jacek Lawrynowicz
- Wake up the device as late as possible - Remove job reference counting in order to simplify the code - Don't put jobs that are not fully submitted on submitted_jobs_xa in order to avoid potential races with reset/recovery Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-3-jacek.lawrynowicz@linux.intel.com
2024-01-25accel/ivpu: Fix dev open/close races with unbindJacek Lawrynowicz
- Add context_list_lock to synchronize user context addition/removal - Use drm_dev_enter() to prevent unbinding the device during ivpu_open() and vpu address allocation Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-2-jacek.lawrynowicz@linux.intel.com
2024-01-25drm/i915/psr: Only allow PSR in LPSP mode on HSW non-ULTVille Syrjälä
On HSW non-ULT (or at least on Dell Latitude E6540) external displays start to flicker when we enable PSR on the eDP. We observe a much higher SR and PC6 residency than should be possible with an external display, and indeen much higher than what we observe with eDP disabled and only the external display enabled. Looks like the hardware is somehow ignoring the fact that the external display is active during PSR. I wasn't able to redproduce this on my HSW ULT machine, or BDW. So either there's something specific about this particular laptop (eg. some unknown firmware thing) or the issue is limited to just non-ULT HSW systems. All known registers that could affect this look perfectly reasonable on the affected machine. As a workaround let's unmask the LPSP event to prevent PSR entry except while in LPSP mode (only pipe A + eDP active). This will prevent PSR entry entirely when multiple pipes are active. The one slight downside is that we now also prevent PSR entry when driving eDP with pipe B or C, but I think that's a reasonable tradeoff to avoid having to implement a more complex workaround. Cc: stable@vger.kernel.org Fixes: 783d8b80871f ("drm/i915/psr: Re-enable PSR1 on hsw/bdw") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10092 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240118212131.31868-1-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> (cherry picked from commit 94501c3ca6400e463ff6cc0c9cf4a2feb6a9205d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-01-25HID: hidraw: fix a problem of memory leak in hidraw_release()Su Hui
'struct hidraw_list' is a circular queue whose head can be smaller than tail. Using 'list->tail != list->head' to release all memory that should be released. Fixes: a5623a203cff ("HID: hidraw: fix memory leak in hidraw_release()") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-24md: fix a suspicious RCU usage warningMikulas Patocka
RCU protection was removed in the commit 2d32777d60de ("raid1: remove rcu protection to access rdev from conf"). However, the code in fix_read_error does rcu_dereference outside rcu_read_lock - this triggers the following warning. The warning is triggered by a LVM2 test shell/integrity-caching.sh. This commit removes rcu_dereference. ============================= WARNING: suspicious RCU usage 6.7.0 #2 Not tainted ----------------------------- drivers/md/raid1.c:2265 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by mdX_raid1/1859. stack backtrace: CPU: 2 PID: 1859 Comm: mdX_raid1 Not tainted 6.7.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0x70 lockdep_rcu_suspicious+0x153/0x1b0 raid1d+0x1732/0x1750 [raid1] ? lock_acquire+0x9f/0x270 ? finish_wait+0x3d/0x80 ? md_thread+0xf7/0x130 [md_mod] ? lock_release+0xaa/0x230 ? md_register_thread+0xd0/0xd0 [md_mod] md_thread+0xa0/0x130 [md_mod] ? housekeeping_test_cpu+0x30/0x30 kthread+0xdc/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x28/0x40 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: ca294b34aaf3 ("md/raid1: support read error check") Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/51539879-e1ca-fde3-b8b4-8934ddedcbc@redhat.com
2024-01-24cxl/region：Fix overflow issue in alloc_hpa()Quanquan Cao
Creating a region with 16 memory devices caused a problem. The div_u64_rem function, used for dividing an unsigned 64-bit number by a 32-bit one, faced an issue when SZ_256M * p->interleave_ways. The result surpassed the maximum limit of the 32-bit divisor (4G), leading to an overflow and a remainder of 0. note: At this point, p->interleave_ways is 16, meaning 16 * 256M = 4G To fix this issue, I replaced the div_u64_rem function with div64_u64_rem and adjusted the type of the remainder. Signed-off-by: Quanquan Cao <caoqq@fujitsu.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Fixes: 23a22cd1c98b ("cxl/region: Allocate HPA capacity to regions") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2024-01-25Merge tag 'exynos-drm-fixes-for-v6.8-rc2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Several fixups - Minor fix in `drm/exynos: gsc: gsc_runtime_resume` . The patch ensures `clk_disable_unprepare()` is called on the first element of `ctx->clocks` array. This issue was identified by the Linux Verification Center. - Fix excessive stack usage in `fimd_win_set_pixfmt()` in `drm/exynos` . The issue, highlighted by gcc, involved an unnecessary on-stack copy of the large `exynos_drm_plane` structure, now replaced with a pointer. - Fix an incorrect type issue in `exynos_drm_fimd.c` module . Addresses an incorrect type issue in `fimd_commit()` within the `exynos_drm_fimd.c` The problem was reported by the kernel test robot[1]. [1] https://lore.kernel.org/oe-kbuild-all/202312140930.Me9yWf8F-lkp@intel.com/ - Fix a typo in the dt-bindings for `samsung,exynos-mixer` . Changes 'regs' to the correct property name 'reg' in the dt-bindings documentation for `samsung,exynos-mixer` Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240122072407.39546-1-inki.dae@samsung.com
2024-01-25Merge tag 'drm-misc-next-fixes-2024-01-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A null pointer dereference fix for v3d and a protection fault fix for ttm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/5zrphn2nhxnwillxlmo6ap3zh7qjt3jgydlm5sntuc4fzvwhpo@hznprx2bjyi7
2024-01-25Merge tag 'drm-intel-next-fixes-2024-01-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - DSI sequence revert to fix GitLab #10071 and DP test-pattern fix - Drop -Wstringop-overflow (broken on GCC11) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZaozNnAGhu6Ec6cb@jlahtine-mobl.ger.corp.intel.com
2024-01-24fjes: fix memleaks in fjes_hw_setupZhipeng Lu
In fjes_hw_setup, it allocates several memory and delay the deallocation to the fjes_hw_exit in fjes_probe through the following call chain: fjes_probe |-> fjes_hw_init |-> fjes_hw_setup |-> fjes_hw_exit However, when fjes_hw_setup fails, fjes_hw_exit won't be called and thus all the resources allocated in fjes_hw_setup will be leaked. In this patch, we free those resources in fjes_hw_setup and prevents such leaks. Fixes: 2fcbca687702 ("fjes: platform_driver's .probe and .remove routine") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240122172445.3841883-1-alexious@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24Merge tag 'ceph-for-6.8-rc2' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A fix to avoid triggering an assert in some cases where RBD exclusive mappings are involved and a deprecated API cleanup" * tag 'ceph-for-6.8-rc2' of https://github.com/ceph/ceph-client: rbd: don't move requests to the running list on errors rbd: remove usage of the deprecated ida_simple_*() API
2024-01-24i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queueMaciej Fijalkowski
Now that i40e driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. i40e_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-12-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24i40e: set xdp_rxq_info::frag_sizeMaciej Fijalkowski
i40e support XDP multi-buffer so it is supposed to use __xdp_rxq_info_reg() instead of xdp_rxq_info_reg() and set the frag_size. It can not be simply converted at existing callsite because rx_buf_len could be un-initialized, so let us register xdp_rxq_info within i40e_configure_rx_ring(), which happen to be called with already initialized rx_buf_len value. Commit 5180ff1364bc ("i40e: use int for i40e_status") converted 'err' to int, so two variables to deal with return codes are not needed within i40e_configure_rx_ring(). Remove 'ret' and use 'err' to handle status from xdp_rxq_info registration. Fixes: e213ced19bef ("i40e: add support for XDP multi-buffer Rx") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-11-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24ice: update xdp_rxq_info::frag_size for ZC enabled Rx queueMaciej Fijalkowski
Now that ice driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. ice_rx_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Use a bigger hammer and instead of unregistering only xdp_rxq_info's memory model, unregister it altogether and register it again and have xdp_rxq_info with correct frag_size value. Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-9-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24intel: xsk: initialize skb_frag_t::bv_offset in ZC driversMaciej Fijalkowski
Ice and i40e ZC drivers currently set offset of a frag within skb_shared_info to 0, which is incorrect. xdp_buffs that come from xsk_buff_pool always have 256 bytes of a headroom, so they need to be taken into account to retrieve xdp_buff::data via skb_frag_address(). Otherwise, bpf_xdp_frags_increase_tail() would be starting its job from xdp_buff::data_hard_start which would result in overwriting existing payload. Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-8-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24ice: remove redundant xdp_rxq_info registrationMaciej Fijalkowski
xdp_rxq_info struct can be registered by drivers via two functions - xdp_rxq_info_reg() and __xdp_rxq_info_reg(). The latter one allows drivers that support XDP multi-buffer to set up xdp_rxq_info::frag_size which in turn will make it possible to grow the packet via bpf_xdp_adjust_tail() BPF helper. Currently, ice registers xdp_rxq_info in two spots: 1) ice_setup_rx_ring() // via xdp_rxq_info_reg(), BUG 2) ice_vsi_cfg_rxq() // via __xdp_rxq_info_reg(), OK Cited commit under fixes tag took care of setting up frag_size and updated registration scheme in 2) but it did not help as 1) is called before 2) and as shown above it uses old registration function. This means that 2) sees that xdp_rxq_info is already registered and never calls __xdp_rxq_info_reg() which leaves us with xdp_rxq_info::frag_size being set to 0. To fix this misbehavior, simply remove xdp_rxq_info_reg() call from ice_setup_rx_ring(). Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-7-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24i40e: handle multi-buffer packets that are shrunk by xdp progTirthendu Sarkar
XDP programs can shrink packets by calling the bpf_xdp_adjust_tail() helper function. For multi-buffer packets this may lead to reduction of frag count stored in skb_shared_info area of the xdp_buff struct. This results in issues with the current handling of XDP_PASS and XDP_DROP cases. For XDP_PASS, currently skb is being built using frag count of xdp_buffer before it was processed by XDP prog and thus will result in an inconsistent skb when frag count gets reduced by XDP prog. To fix this, get correct frag count while building the skb instead of using pre-obtained frag count. For XDP_DROP, current page recycling logic will not reuse the page but instead will adjust the pagecnt_bias so that the page can be freed. This again results in inconsistent behavior as the page refcnt has already been changed by the helper while freeing the frag(s) as part of shrinking the packet. To fix this, only adjust pagecnt_bias for buffers that are stillpart of the packet post-xdp prog run. Fixes: e213ced19bef ("i40e: add support for XDP multi-buffer Rx") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-6-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24ice: work on pre-XDP prog frag countMaciej Fijalkowski
Fix an OOM panic in XDP_DRV mode when a XDP program shrinks a multi-buffer packet by 4k bytes and then redirects it to an AF_XDP socket. Since support for handling multi-buffer frames was added to XDP, usage of bpf_xdp_adjust_tail() helper within XDP program can free the page that given fragment occupies and in turn decrease the fragment count within skb_shared_info that is embedded in xdp_buff struct. In current ice driver codebase, it can become problematic when page recycling logic decides not to reuse the page. In such case, __page_frag_cache_drain() is used with ice_rx_buf::pagecnt_bias that was not adjusted after refcount of page was changed by XDP prog which in turn does not drain the refcount to 0 and page is never freed. To address this, let us store the count of frags before the XDP program was executed on Rx ring struct. This will be used to compare with current frag count from skb_shared_info embedded in xdp_buff. A smaller value in the latter indicates that XDP prog freed frag(s). Then, for given delta decrement pagecnt_bias for XDP_DROP verdict. While at it, let us also handle the EOP frag within ice_set_rx_bufs_act() to make our life easier, so all of the adjustments needed to be applied against freed frags are performed in the single place. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-5-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24xsk: make xsk_buff_pool responsible for clearing xdp_buff::flagsMaciej Fijalkowski
XDP multi-buffer support introduced XDP_FLAGS_HAS_FRAGS flag that is used by drivers to notify data path whether xdp_buff contains fragments or not. Data path looks up mentioned flag on first buffer that occupies the linear part of xdp_buff, so drivers only modify it there. This is sufficient for SKB and XDP_DRV modes as usually xdp_buff is allocated on stack or it resides within struct representing driver's queue and fragments are carried via skb_frag_t structs. IOW, we are dealing with only one xdp_buff. ZC mode though relies on list of xdp_buff structs that is carried via xsk_buff_pool::xskb_list, so ZC data path has to make sure that fragments do *not* have XDP_FLAGS_HAS_FRAGS set. Otherwise, xsk_buff_free() could misbehave if it would be executed against xdp_buff that carries a frag with XDP_FLAGS_HAS_FRAGS flag set. Such scenario can take place when within supplied XDP program bpf_xdp_adjust_tail() is used with negative offset that would in turn release the tail fragment from multi-buffer frame. Calling xsk_buff_free() on tail fragment with XDP_FLAGS_HAS_FRAGS would result in releasing all the nodes from xskb_list that were produced by driver before XDP program execution, which is not what is intended - only tail fragment should be deleted from xskb_list and then it should be put onto xsk_buff_pool::free_list. Such multi-buffer frame will never make it up to user space, so from AF_XDP application POV there would be no traffic running, however due to free_list getting constantly new nodes, driver will be able to feed HW Rx queue with recycled buffers. Bottom line is that instead of traffic being redirected to user space, it would be continuously dropped. To fix this, let us clear the mentioned flag on xsk_buff_pool side during xdp_buff initialization, which is what should have been done right from the start of XSK multi-buffer support. Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-3-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanupAbhinav Kumar
The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") introduced a smatch warning about another conditional block in dpu_encoder_helper_phys_cleanup() which had assumed hw_pp will always be valid which may not necessarily be true. Lets fix the other conditional block by making sure hw_pp is valid before dereferencing it. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/574878/ Link: https://lore.kernel.org/r/20240117194109.21609-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-01-24net: fill in MODULE_DESCRIPTION()s for rvu_mboxBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Marvel RVU mbox driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-11-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 18:15:50 +0000