| Age | Commit message (Collapse) | Author |
|---|
|
Commit 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
introduced register offsets to the driver but for ipq8074/ipq6018 they do
not match what was in the old style device tree. Example from old
ipq6018.dtsi:
<0x00078200 0x130>, /* Tx */
<0x00078400 0x200>, /* Rx */
<0x00078800 0x1f8>, /* PCS */
<0x00078600 0x044>; /* PCS misc */
which would translate to:
{.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 }
but was translated to:
{.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 }
So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018.
Tested only on IPQ6018
Fixes: 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1706026160-17520-2-git-send-email-mantas@8devices.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Current code uses the specified ring buffer size (either the default of 128
Kbytes or a module parameter specified value) to encompass the one page
ring buffer header plus the actual ring itself. When the page size is 4K,
carving off one page for the header isn't significant. But when the page
size is 64K on ARM64, only half of the default 128 Kbytes is left for the
actual ring. While this doesn't break anything, the smaller ring size
could be a performance bottleneck.
Fix this by applying the VMBUS_RING_SIZE macro to the specified ring buffer
size. This macro adds a page for the header, and rounds up the size to a
page boundary, using the page size for which the kernel is built. Use this
new size for subsequent ring buffer calculations. For example, on ARM64
with 64K page size and the default ring size, this results in the actual
ring being 128 Kbytes, which is intended.
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240122170956.496436-1-mhklinux@outlook.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host
lock every time for deciding if error handler kthread needs to be waken up.
This can be too heavy in case of recovery, such as:
- N hardware queues
- queue depth is M for each hardware queue
- each scsi_host_busy() iterates over (N * M) tag/requests
If recovery is triggered in case that all requests are in-flight, each
scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called
for the last in-flight request, scsi_host_busy() has been run for (N * M -
1) times, and request has been iterated for (N*M - 1) * (N * M) times.
If both N and M are big enough, hard lockup can be triggered on acquiring
host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169).
Fix the issue by calling scsi_host_busy() outside the host lock. We don't
need the host lock for getting busy count because host the lock never
covers that.
[mkp: Drop unnecessary 'busy' variables pointed out by Bart]
Cc: Ewan Milne <emilne@redhat.com>
Fixes: 6eb045e092ef ("scsi: core: avoid host-wide host_busy counter for scsi_mq")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240112070000.4161982-1-ming.lei@redhat.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Tested-by: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code in netvsc_drv_init() incorrectly assumes that PAGE_SIZE
is 4 Kbytes, which is wrong on ARM64 with 16K or 64K page size. As a
result, the default VMBus ring buffer size on ARM64 with 64K page size
is 8 Mbytes instead of the expected 512 Kbytes. While this doesn't break
anything, a typical VM with 8 vCPUs and 8 netvsc channels wastes 120
Mbytes (8 channels * 2 ring buffers/channel * 7.5 Mbytes/ring buffer).
Unfortunately, the module parameter specifying the ring buffer size
is in units of 4 Kbyte pages. Ideally, it should be in units that
are independent of PAGE_SIZE, but backwards compatibility prevents
changing that now.
Fix this by having netvsc_drv_init() hardcode 4096 instead of using
PAGE_SIZE when calculating the ring buffer size in bytes. Also
use the VMBUS_RING_SIZE macro to ensure proper alignment when running
with page size larger than 4K.
Cc: <stable@vger.kernel.org> # 5.15.x
Fixes: 7aff79e297ee ("Drivers: hv: Enable Hyper-V code to be built on ARM64")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240122162028.348885-1-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit b34ab3527b9622ca4910df24ff5beed5aa66c6b5.
Using skb_ensure_writable_head_tail without a call to skb_unshare causes
the MACsec stack to operate on the original skb rather than a copy in the
macsec_encrypt path. This causes the buffer to be exceeded in space, and
leads to warnings generated by skb_put operations. Opting to revert this
change since skb_copy_expand is more efficient than
skb_ensure_writable_head_tail followed by a call to skb_unshare.
Log:
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:2464!
invalid opcode: 0000 [#1] SMP KASAN
CPU: 21 PID: 61997 Comm: iperf3 Not tainted 6.7.0-rc8_for_upstream_debug_2024_01_07_17_05 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_put+0x113/0x190
Code: 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 70 3b 9d bc 00 00 00 77 0e 48 83 c4 08 4c 89 e8 5b 5d 41 5d c3 <0f> 0b 4c 8b 6c 24 20 89 74 24 04 e8 6d b7 f0 fe 8b 74 24 04 48 c7
RSP: 0018:ffff8882694e7278 EFLAGS: 00010202
RAX: 0000000000000025 RBX: 0000000000000100 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000010 RDI: ffff88816ae0bad4
RBP: ffff88816ae0ba60 R08: 0000000000000004 R09: 0000000000000004
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88811ba5abfa
R13: ffff8882bdecc100 R14: ffff88816ae0ba60 R15: ffff8882bdecc0ae
FS: 00007fe54df02740(0000) GS:ffff88881f080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe54d92e320 CR3: 000000010a345003 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? die+0x33/0x90
? skb_put+0x113/0x190
? do_trap+0x1b4/0x3b0
? skb_put+0x113/0x190
? do_error_trap+0xb6/0x180
? skb_put+0x113/0x190
? handle_invalid_op+0x2c/0x30
? skb_put+0x113/0x190
? exc_invalid_op+0x2b/0x40
? asm_exc_invalid_op+0x16/0x20
? skb_put+0x113/0x190
? macsec_start_xmit+0x4e9/0x21d0
macsec_start_xmit+0x830/0x21d0
? get_txsa_from_nl+0x400/0x400
? lock_downgrade+0x690/0x690
? dev_queue_xmit_nit+0x78b/0xae0
dev_hard_start_xmit+0x151/0x560
__dev_queue_xmit+0x1580/0x28f0
? check_chain_key+0x1c5/0x490
? netdev_core_pick_tx+0x2d0/0x2d0
? __ip_queue_xmit+0x798/0x1e00
? lock_downgrade+0x690/0x690
? mark_held_locks+0x9f/0xe0
ip_finish_output2+0x11e4/0x2050
? ip_mc_finish_output+0x520/0x520
? ip_fragment.constprop.0+0x230/0x230
? __ip_queue_xmit+0x798/0x1e00
__ip_queue_xmit+0x798/0x1e00
? __skb_clone+0x57a/0x760
__tcp_transmit_skb+0x169d/0x3490
? lock_downgrade+0x690/0x690
? __tcp_select_window+0x1320/0x1320
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x286/0x400
? tcp_small_queue_check.isra.0+0x120/0x3d0
tcp_write_xmit+0x12b6/0x7100
? skb_page_frag_refill+0x1e8/0x460
__tcp_push_pending_frames+0x92/0x320
tcp_sendmsg_locked+0x1ed4/0x3190
? tcp_sendmsg_fastopen+0x650/0x650
? tcp_sendmsg+0x1a/0x40
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x286/0x400
tcp_sendmsg+0x28/0x40
? inet_send_prepare+0x1b0/0x1b0
__sock_sendmsg+0xc5/0x190
sock_write_iter+0x222/0x380
? __sock_sendmsg+0x190/0x190
? kfree+0x96/0x130
vfs_write+0x842/0xbd0
? kernel_write+0x530/0x530
? __fget_light+0x51/0x220
? __fget_light+0x51/0x220
ksys_write+0x172/0x1d0
? update_socket_protocol+0x10/0x10
? __x64_sys_read+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x286/0x400
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0x7fe54d9018b7
Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffdbd4191d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000025 RCX: 00007fe54d9018b7
RDX: 0000000000000025 RSI: 0000000000d9859c RDI: 0000000000000004
RBP: 0000000000d9859c R08: 0000000000000004 R09: 0000000000000000
R10: 00007fe54d80afe0 R11: 0000000000000246 R12: 0000000000000004
R13: 0000000000000025 R14: 00007fe54e00ec00 R15: 0000000000d982a0
</TASK>
Modules linked in: 8021q garp mrp iptable_raw bonding vfio_pci rdma_ucm ib_umad mlx5_vfio_pci mlx5_ib vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ip_gre nf_tables ipip tunnel4 ib_ipoib ip6_gre gre ip6_tunnel tunnel6 geneve openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core zram zsmalloc fuse [last unloaded: ib_uverbs]
---[ end trace 0000000000000000 ]---
Cc: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20240118191811.50271-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc2
The most visible fix here is the ath11k crash fix which was introduced
in v6.7. We also have a fix for iwlwifi memory corruption and few
smaller fixes in the stack.
* tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix race condition on enabling fast-xmit
wifi: iwlwifi: fix a memory corruption
wifi: mac80211: fix potential sta-link leak
wifi: cfg80211/mac80211: remove dependency on non-existing option
wifi: cfg80211: fix missing interfaces when dumping
wifi: ath11k: rely on mac80211 debugfs handling for vif
wifi: p54: fix GCC format truncation warning with wiphy->fw_version
====================
Link: https://lore.kernel.org/r/20240122153434.E0254C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The host and target use two definition of aer type, unify
them into a single one.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Return IRQ_NONE from the interrupt handler when no interrupt was
detected. Because an empty interrupt will cause a null pointer error:
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000008
Call trace:
complete+0x54/0x100
hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx]
__handle_irq_event_percpu+0x64/0x1e0
handle_irq_event+0x7c/0x1cc
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Link: https://msgid.link/r/20240123071149.917678-1-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
shared interrupt register
We can't use devm_platform_ioremap_resource_byname() to remap the
interrupt register that can be shared between
regulator-abb-{ivahd,dspeve,gpu} drivers instances.
The combined helper introduce a call to devm_request_mem_region() that
creates a new busy resource region on PRM_IRQSTATUS_MPU register
(0x4ae06010). The first devm_request_mem_region() call succeeds for
regulator-abb-ivahd but fails for the two other regulator-abb-dspeve
and regulator-abb-gpu.
# cat /proc/iomem | grep -i 4ae06
4ae06010-4ae06013 : 4ae07e34.regulator-abb-ivahd int-address
4ae06014-4ae06017 : 4ae07ddc.regulator-abb-mpu int-address
regulator-abb-dspeve and regulator-abb-gpu are missing due to
devm_request_mem_region() failure (EBUSY):
[ 1.326660] ti_abb 4ae07e30.regulator-abb-dspeve: can't request region for resource [mem 0x4ae06010-0x4ae06013]
[ 1.326660] ti_abb: probe of 4ae07e30.regulator-abb-dspeve failed with error -16
[ 1.327239] ti_abb 4ae07de4.regulator-abb-gpu: can't request region for resource [mem 0x4ae06010-0x4ae06013]
[ 1.327270] ti_abb: probe of 4ae07de4.regulator-abb-gpu failed with error -16
>From arm/boot/dts/dra7.dtsi:
The abb_mpu is the only instance using its own interrupt register:
(0x4ae06014) PRM_IRQSTATUS_MPU_2, ABB_MPU_DONE_ST (bit 7)
The other tree instances (abb_ivahd, abb_dspeve, abb_gpu) share
PRM_IRQSTATUS_MPU register (0x4ae06010) but use different bits
ABB_IVA_DONE_ST (bit 30), ABB_DSPEVE_DONE_ST( bit 29) and
ABB_GPU_DONE_ST (but 28).
The commit b36c6b1887ff ("regulator: ti-abb: Make use of the helper
function devm_ioremap related") overlooked the following comment
implicitly explaining why devm_ioremap() is used in this case:
/*
* We may have shared interrupt register offsets which are
* write-1-to-clear between domains ensuring exclusivity.
*/
Fixes and partially reverts commit b36c6b1887ff ("regulator: ti-abb:
Make use of the helper function devm_ioremap related").
Improve the existing comment to avoid further conversion to
devm_platform_ioremap_resource_byname().
Fixes: b36c6b1887ff ("regulator: ti-abb: Make use of the helper function devm_ioremap related")
Signed-off-by: Romain Naour <romain.naour@skf.com>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Link: https://msgid.link/r/20240123111456.739381-1-romain.naour@smile.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The EFI stub makefile contains logic to ensure that the objects that
make up the stub do not contain relocations that require runtime fixups
(typically to account for the runtime load address of the executable)
On RISC-V, we also avoid GP based relocations, as they require that GP
is assigned the correct base in the startup code, which is not
implemented in the EFI stub.
So add these relocation types to the grep expression that is used to
carry out this check.
Link: https://lkml.kernel.org/r/42c63cb9-87d0-49db-9af8-95771b186684%40siemens.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The cflags for the RISC-V efistub were missing -mno-relax, thus were
under the risk that the compiler could use GP-relative addressing. That
happened for _edata with binutils-2.41 and kernel 6.1, causing the
relocation to fail due to an invalid kernel_size in handle_kernel_image.
It was not yet observed with newer versions, but that may just be luck.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In the existing implementation, when executing interleaved write and read
operations in the ISR for a transfer length greater than the FIFO size,
the TXFIFO write precedes the RXFIFO read. Consequently, the initially
received data in the RXFIFO is pushed out and lost, leading to a failure
in data integrity. To address this issue, reverse the order of interleaved
operations and conduct the RXFIFO read followed by the TXFIFO write.
Fixes: 6afe2ae8dc48 ("spi: spi-cadence: Interleave write of TX and read of RX FIFO")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://msgid.link/r/20231218090652.18403-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If dma_request_chan() fails, no error is shown nor any information is
shown in /sys/kernel/debug/devices_deferred if -EPROBE_DEFER is returned.
Use dev_err_probe to fix both problems.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://msgid.link/r/20240110085403.457089-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op()
call. This fixes SFDP parameter page read failures seen with parts that
now use SFDP protocol to read the basic flash parameter table.
Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://msgid.link/r/20240109210033.43249-1-kamal.dasu@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the power domains are registered first with genpd and *after that*
the driver attempts to power them on in the probe sequence, then it is
possible that a race condition occurs if genpd tries to power them on
in the same time.
The same is valid for powering them off before unregistering them
from genpd.
Attempt to fix race conditions by first removing the domains from genpd
and *after that* powering down domains.
Also first power up the domains and *after that* register them
to genpd.
Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231225133615.78993-1-eugen.hristev@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There's a Cirque touchpad that wakes system up without anything touched
the touchpad. The input report is empty when this happens.
The reason is stated in HID over I2C spec, 7.2.8.2:
"If the DEVICE wishes to wake the HOST from its low power state, it can
issue a wake by asserting the interrupt."
This is fine if OS can put system back to suspend by identifying input
wakeup count stays the same on resume, like Chrome OS Dark Resume [0].
But for regular distro such policy is lacking.
Though the change doesn't bring any impact on power consumption for
touchpad is minimal, other i2c-hid device may depends on SLEEP control
power. So use a quirk to limit the change scope.
[0] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/power_manager/docs/dark_resume.md
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
[jkosina@suse.com: tweak changelog a bit]
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Avoid a kernel crash in stifb by providing the correct pointer to the fb_info
struct. Prior to commit e2e0b838a184 ("video/sticore: Remove info field from
STI struct") the fb_info struct was at the beginning of the fb struct.
Fixes: e2e0b838a184 ("video/sticore: Remove info field from STI struct")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The QXL driver doesn't use any device for DMA mappings or allocations so
dev_to_node() will panic inside ttm_device_init() on NUMA systems:
general protection fault, probably for non-canonical address 0xdffffc000000007a: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000003d0-0x00000000000003d7]
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.7.0+ #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:ttm_device_init+0x10e/0x340
Call Trace:
qxl_ttm_init+0xaa/0x310
qxl_device_init+0x1071/0x2000
qxl_pci_probe+0x167/0x3f0
local_pci_probe+0xe1/0x1b0
pci_device_probe+0x29d/0x790
really_probe+0x251/0x910
__driver_probe_device+0x1ea/0x390
driver_probe_device+0x4e/0x2e0
__driver_attach+0x1e3/0x600
bus_for_each_dev+0x12d/0x1c0
bus_add_driver+0x25a/0x590
driver_register+0x15c/0x4b0
qxl_pci_driver_init+0x67/0x80
do_one_initcall+0xf5/0x5d0
kernel_init_freeable+0x637/0xb10
kernel_init+0x1c/0x2e0
ret_from_fork+0x48/0x80
ret_from_fork_asm+0x1b/0x30
RIP: 0010:ttm_device_init+0x10e/0x340
Fall back to NUMA_NO_NODE if there is no device for DMA.
Found by Linux Verification Center (linuxtesting.org).
Fixes: b0a7ce53d494 ("drm/ttm: Schedule delayed_delete worker closer")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the boot logo does not fit, a message is printed, including a wrong
function name prefix. Instead of correcting the function name (or using
__func__), just use "fbcon", like is done in several other messages.
While at it, modernize the call by switching to pr_info().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Currently, both ATA_LPM_UNKNOWN (0) and ATA_LPM_MAX_POWER (1) displays
as "max_performance" in sysfs.
This is quite misleading as they are not the same.
For ATA_LPM_UNKNOWN, ata_eh_set_lpm() will not be called at all,
leaving the configuration in unknown state.
For ATA_LPM_MAX_POWER, ata_eh_set_lpm() is called, and setting the
policy to ATA_LPM_MAX_POWER.
This also matches the description of the SATA_MOBILE_LPM_POLICY Kconfig:
0 => Keep firmware settings
1 => Maximum performance
Thus, update the sysfs description for ATA_LPM_UNKNOWN to match reality.
While at it, update libata.h to mention that the ascii descriptions
are in libata-sata.c and not in libata-scsi.c.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Pull in staged fixes for 6.8.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let logitech-hidpp driver claim Logitech G Pro X Superlight 2.
Reported-by: Marcus Rückert <darix@opensu.se>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Scaling min/max freq values were being cached and lagging a setting
each time. Fix the ordering of the clamp call to ensure they work.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Fixes: febab20caeba ("cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wkarny@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CXL 3.1 Section 3.1.1 states:
"A Function on a CXL device must not generate INTx messages if
that Function participates in CXL.cache protocol or CXL.mem
protocols."
The generic CXL memory driver only supports devices which use the
CXL.mem protocol. The current driver attempts to allocate MSI/MSI-X
vectors in anticipation of their need for mailbox interrupts or event
processing. However, the above requirement does not require a device to
support interrupts, only that they use MSI/MSI-X. For example, a device
may disable mailbox interrupts and either be configured for firmware
first or skip event processing and function.
Dave Larsen reported that the following Intel / Agilex card does not
support interrupts on function 0.
CXL: Intel Corporation Device 0ddb (rev 01) (prog-if 10 [CXL Memory Device (CXL 2.x)])
Rather than fail device probe if interrupts are not supported; flag that
irqs are not enabled and avoid features which require interrupts.
Emit messages appropriate for the situation to aid in debugging should
device behavior be unexpected due to a failure to allocate vectors.
Note that it is possible for a device to have host based event
processing through polling. However, the driver does not support
polling and it is not anticipated to be generally required. Leave that
functionality to a future patch if such a device comes along.
Reported-by: Dave Larsen <davelarsen58@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-and-tested-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240117-dont-fail-irq-v2-1-f33f26b0e365@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen netback fix from Juergen Gross:
"Transmit requests in Xen's virtual network protocol can consist of
multiple parts. While not really useful, except for the initial part
any of them may be of zero length, i.e. carry no data at all.
Besides a certain initial portion of the to be transferred data, these
parts are directly translated into what Linux calls SKB fragments.
Such converted request parts can, when for a particular SKB they are
all of length zero, lead to a de-reference of NULL in core networking
code"
* tag 'xsa448-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-netback: don't produce zero-size SKB frags
|
|
Stephen Rothwell reported htmldocs warnings when merging drm-intel
tree:
Documentation/gpu/drm-kms-helpers:296: drivers/gpu/drm/display/drm_dp_mst_topology.c:5484: ERROR: Unexpected indentation.
Documentation/gpu/drm-kms-helpers:296: drivers/gpu/drm/display/drm_dp_mst_topology.c:5488: WARNING: Block quote ends without a blank line; unexpected unindent.
Separate @failing_port return value list by surrounding it with a
blank line to fix above warnings.
Fixes: 1cd0a5ea427931 ("drm/dp_mst: Factor out a helper to check the atomic state of a topology manager")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20231114141715.6f435118@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114081033.27343-1-bagasdotme@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Similar to commit 26db46bc9c67 ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"). Add a mutex to ensure that aux transfer
won't race with atomic_disable by holding the PM reference and prevent
the bridge from suspend.
Also we need to use pm_runtime_put_sync_suspend() to suspend the bridge
instead of idle with pm_runtime_put_sync().
Fixes: 3203e497eb76 ("drm/bridge: anx7625: Synchronously run runtime suspend.")
Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118015916.2296741-1-hsinyi@chromium.org
|
|
This adds the PCI ID of the Arrow Lake and Meteor Lake-S PCH SPI serial
flash controller. This one supports all the necessary commands Linux
SPI-NOR stack requires.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240122120034.2664812-3-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Turns out this "SoC" side controller does not support certain commands,
such as reading chip JEDEC ID, so the controller is pretty much unusable
in Linux. We should be using the "PCH" side controller instead. For this
reason remove this PCI ID from the list.
Fixes: c2912d42e86e ("spi: intel-pci: Add support for Meteor Lake-S SPI serial flash")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240122120034.2664812-2-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Odroid-C1 uses a Monolithic Power Systems MP2161 controlled via PWM for
the VDDEE voltage supply of the Meson8b SoC. Commit 6b9352f3f8a1 ("pwm:
meson: modify and simplify calculation in meson_pwm_get_state") results
in my Odroid-C1 crashing with memory corruption in many different places
(seemingly at random). It turns out that this is due to a currently not
supported corner case.
The VDDEE regulator can generate between 860mV (duty cycle of ~91%) and
1140mV (duty cycle of 0%). We consider it to be enabled by the bootloader
(which is why it has the regulator-boot-on flag in .dts) as well as
being always-on (which is why it has the regulator-always-on flag in
.dts) because the VDDEE voltage is generally required for the Meson8b
SoC to work. The public S805 datasheet [0] states on page 17 (where "A5"
refers to the Cortex-A5 CPU cores):
[...] So if EE domains is shut off, A5 memory is also shut off. That
does not matter. Before EE power domain is shut off, A5 should be shut
off at first.
It turns out that at least some bootloader versions are keeping the PWM
output disabled. This is not a problem due to the specific design of the
regulator: when the PWM output is disabled the output pin is pulled LOW,
effectively achieving a 0% duty cycle (which in return means that VDDEE
voltage is at 1140mV).
The problem comes when the pwm-regulator driver tries to initialize the
PWM output. To do so it reads the current state from the hardware, which
is:
period: 3666ns
duty cycle: 3333ns (= ~91%)
enabled: false
Then those values are translated using the continuous voltage range to
860mV.
Later, when the regulator is being enabled (either by the regulator core
due to the always-on flag or first consumer - in this case the lima
driver for the Mali-450 GPU) the pwm-regulator driver tries to keep the
voltage (at 860mV) and just enable the PWM output. This is when things
start to go wrong as the typical voltage used for VDDEE is 1100mV.
Commit 6b9352f3f8a1 ("pwm: meson: modify and simplify calculation in
meson_pwm_get_state") triggers above condition as before that change
period and duty cycle were both at 0. Since the change to the pwm-meson
driver is considered correct the solution is to be found in the
pwm-regulator driver. Update the duty cycle during driver probe if the
regulator is flagged as boot-on so that a call to pwm_regulator_enable()
(by the regulator core during initialization of a regulator flagged with
boot-on) without any preceding call to pwm_regulator_set_voltage() does
not change the output voltage.
[0] https://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-4-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If a PWM output is disabled then it's voltage has to be calculated
based on a zero duty cycle (for normal polarity) or duty cycle being
equal to the PWM period (for inverted polarity). Add support for this
to pwm_regulator_get_voltage().
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-3-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Continuous regulators can be configured to operate only in a certain
duty cycle range (for example from 0..91%). Add a check to error out if
the duty cycle translates to an unsupported (or out of range) voltage.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The power domain containing the Cortex-R7 CPU core on the R-Car V3H SoC
must always be in power-on state, unlike on other SoCs in the R-Car Gen3
family. See Table 9.4 "Power domains" in the R-Car Series, 3rd
Generation Hardware User’s Manual Rev.1.00 and later.
Fix this by marking the domain as a CPU domain without control
registers, so the driver will not touch it.
Fixes: 41d6d8bd8ae9 ("soc: renesas: rcar-sysc: add R8A77980 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/fdad9a86132d53ecddf72b734dac406915c4edc0.1705076735.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The unused clock cleanup uses the _sync initcall to give all users at
earlier initcalls time to probe. Do the same to avoid leaving some PDs
dangling at "on" (which actually happened on qcom!).
Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On systems using HWP, if a given frequency is equal to the maximum turbo
frequency or the maximum non-turbo frequency, the HWP performance level
corresponding to it is already known and can be used directly without
any computation.
Accordingly, adjust the code to use the known HWP performance levels in
the cases mentioned above.
This also helps to avoid limiting CPU capacity artificially in some
cases when the BIOS produces the HWP_CAP numbers using a different
E-core-to-P-core performance scaling factor than expected by the kernel.
Fixes: f5c8cf2a4992 ("cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores")
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
IP reset has to followed by ivpu_pll_disable() to properly enter
reset state.
Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024165353.761507-1-stanislaw.gruszka@linux.intel.com
|
|
'status_head' is a managed resource. It will be freed automatically if
fsl_qdma_prep_status_queue(), and so fsl_qdma_probe(), fails.
Remove the redundant (and harmless) devm_kfree() call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6b7f60aa2b92f73b35c586886daffc1a5ac58697.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This dma_alloc_coherent() is undone neither in the remove function, nor in
the error handling path of fsl_qdma_probe().
Switch to the managed version to fix both issues.
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7f66aa14f59d32b13672dde28602b47deb294e1f.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This dma_alloc_coherent() is undone in the remove function, but not in the
error handling path of fsl_qdma_probe().
Switch to the managed version to fix the issue in the probe and simplify
the remove function.
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a0ef5d0f5a47381617ef339df776ddc68ce48173.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Propagate the TR response status to the device using BCDMA
split-channels. For example CSI-RX driver should be able to check if a
frame was not transferred completely (short packet) and needs to be
discarded.
Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240103-tr_resp_err-v1-1-2fdf6d48ab92@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240118031929.192192-1-chentao@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The event selector fields for 2 counters are contained in one
32-bit register and the current logic does not account for this.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/8834cfa496c97c7c2fcebcfca5a2aa007e20ae96.1705485095.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Starting from Linux 5.16 kernel, Tx timeout mechanism was added
in the virtio_net driver which prints the "Tx timeout" warning
message when a packet stays in Tx queue for too long. Below is an
example of the reported message:
"[494105.316739] virtio_net virtio1 tmfifo_net0: TX timeout on
queue: 0, sq: output.0, vq: 0×1, name: output.0, usecs since
last trans: 3079892256".
This issue could happen when external host driver which drains the
FIFO is restared, stopped or upgraded. To avoid such confusing
"Tx timeout" messages, this commit adds logic to drop the outstanding
Tx packet if it's not able to transmit in two seconds due to Tx FIFO
full, which can be considered as congestion or out-of-resource drop.
This commit also handles the special case that the packet is half-
transmitted into the Tx FIFO. In such case, the packet is discarded
with remaining length stored in vring->rem_padding. So paddings with
zeros can be sent out when Tx space is available to maintain the
integrity of the packet format. The padded packet will be dropped on
the receiving side.
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240111173106.96958-1-limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The HW has the capability to check each frame if it is a PTP frame,
which domain it is, which ptp frame type it is, different ip address in
the frame. And if one of these checks fail then the frame is not
timestamp. Most of these checks were disabled except checking the field
minorVersionPTP inside the PTP header. Meaning that once a partner sends
a frame compliant to 8021AS which has minorVersionPTP set to 1, then the
frame was not timestamp because the HW expected by default a value of 0
in minorVersionPTP. This is exactly the same issue as on lan8841.
Fix this issue by removing this check so the userspace can decide on this.
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of multiple kernel module instances using the same dpll device:
if only one registers dpll device, then only that one can register
directly connected pins with a dpll device. When unregistered parent is
responsible for determining if the muxed pin can be registered with it
or not, the drivers need to be loaded in serialized order to work
correctly - first the driver instance which registers the direct pins
needs to be loaded, then the other instances could register muxed type
pins.
Allow registration of a pin with a parent even if the parent was not
yet registered, thus allow ability for unserialized driver instance
load order.
Do not WARN_ON notification for unregistered pin, which can be invoked
for described case, instead just return error.
Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Reviewed-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If parent pin was unregistered but child pin was not, the userspace
would see the "zombie" pins - the ones that were registered with
a parent pin (dpll_pin_on_pin_register(..)).
Technically those are not available - as there is no dpll device in the
system. Do not dump those pins and prevent userspace from any
interaction with them. Provide a unified function to determine if the
pin is available and use it before acting/responding for user requests.
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Reviewed-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a kernel module is unbound but the pin resources were not entirely
freed (other kernel module instance of the same PCI device have had kept
the reference to that pin), and kernel module is again bound, the pin
properties would not be updated (the properties are only assigned when
memory for the pin is allocated), prop pointer still points to the
kernel module memory of the kernel module which was deallocated on the
unbind.
If the pin dump is invoked in this state, the result is a kernel crash.
Prevent the crash by storing persistent pin properties in dpll subsystem,
copy the content from the kernel module when pin is allocated, instead of
using memory of the kernel module.
Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Reviewed-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If pin type is not expected, or pin properities failed to allocate
memory, the unwind error path shall not destroy pin's xarrays, which
were not yet initialized.
Add new goto label and use it to fix broken error path.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After conversion of this driver to use powercap idle_inject core, this
driver doesn't use target_mwait value. So remove dead code.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
