| Age | Commit message (Collapse) | Author |
|---|
|
Due to a workaround we have to make sure the WM1 watermarks block/lines
values are sensible even when WM1 is disabled. To that end we copy those
values from WM0.
However since we now keep each wm level enabled on a per-plane basis
it doesn't seem necessary to do that copy when we already have an
enabled WM1 on the current plane. That is, we might be in a situation
where another plane can only do WM0 (and thus needs the copy) but
the current plane's WM1 is still perfectly valid (ie. fits into the
current DDB allocation).
Skipping the copy could avoid reprogramming the plane's registers
needlessly in some cases.
Fixes: a301cb0fca2d ("drm/i915: Keep plane watermarks enabled more aggressively")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit c580c2d27ac8754cc6f01da1d715b7272f5f9cbb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
According to hardware programming guide, the swr_rx_data pin group has
only two pins (GPIO5 and GPIO6). This is also visible in "struct
sm8450_groups" in the driver - GPIO15 does not have swr_rx_data
function.
Fixes: ec1652fc4d56 ("pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230203165054.390762-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The "port" comes from the user and if it is zero then the:
ndev = mc->ports[port - 1];
assignment does an out of bounds read. I have changed the if
statement to fix this and to mirror how it is done in
mana_ib_create_qp_rss().
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y8/3Vn8qx00kE9Kk@kili
Acked-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
It was reported that commit b300667b33b2 ("HID: amd_sfh: Disable the
interrupt for all command") had caused increased resume time on HP Envy
x360.
Before this commit 3 sensors were reported, but they were not actually
functional. After this commit the sensors are no longer reported, but
also the resume time increased.
To avoid this problem explicitly look for the number of disabled sensors.
If all the sensors are disabled, clean everything up.
Fixes: b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20230203220850.13924-1-mario.limonciello@amd.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write. In modern kernels this error provokes a WARNING:
usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0
WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411
usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 1 PID: 4645 Comm: dhcpcd Not tainted
6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/12/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
...
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
__usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010
usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068
pl_vendor_req drivers/net/usb/plusb.c:60 [inline]
pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline]
pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85
usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889
__dev_open+0x297/0x4d0 net/core/dev.c:1417
__dev_change_flags+0x587/0x750 net/core/dev.c:8530
dev_change_flags+0x97/0x170 net/core/dev.c:8602
devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147
inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979
sock_do_ioctl+0xcc/0x230 net/socket.c:1169
sock_ioctl+0x1f8/0x680 net/socket.c:1286
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and
remove the USB_DIR_IN flag.
Reported-and-tested-by: syzbot+2a0e7abd24f1eb90ce25@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/00000000000052099f05f3b3e298@google.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some Logitech mice, such as the G903, and possibly the G403, the HID
events are generated on a different interface to the HID++ one.
If we enable hi-res through the HID++ interface, the HID interface
wouldn't know anything about it, and handle the events as if they were
regular scroll events, making the mouse unusable.
Disable hi-res scrolling on those devices until we implement scroll
events through HID++.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885
Fixes: 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230203101800.139380-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
The initial value of hid->collection[].parent_idx if 0. When
Report descriptor doesn't contain "HID Collection", the value
remains as 0.
In the meanwhile, when the Report descriptor fullfill
all following conditions, it will trigger hid_apply_multiplier
function call.
1. Usage page is Generic Desktop Ctrls (0x01)
2. Usage is RESOLUTION_MULTIPLIER (0x48)
3. Contain any FEATURE items
The while loop in hid_apply_multiplier will search the top-most
collection by searching parent_idx == -1. Because all parent_idx
is 0. The loop will run forever.
There is a Report Descriptor triggerring the deadloop
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x48, // Usage (0x48)
0x95, 0x01, // Report Count (1)
0x75, 0x08, // Report Size (8)
0xB1, 0x01, // Feature
Signed-off-by: Xin Zhao <xnzhao@google.com>
Link: https://lore.kernel.org/r/20230130212947.1315941-1-xnzhao@google.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
Check all ports instead of just port_count ports. PTP init was only
checking ports 0 to port_count. If the hardware ports are not mapped
starting from 0 then they would be missed, e.g. if only ports 20-30 were
mapped it would attempt to init ports 0-10, resulting in NULL pointers
when attempting to timestamp. Now it will init all mapped ports.
Fixes: 70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On a sc7180-based Chromebook, when I go to
/sys/devices/system/cpu/cpu0/cpufreq I can see:
cpuinfo_cur_freq:2995200
cpuinfo_max_freq:1804800
scaling_available_frequencies:300000 576000 ... 1708800 1804800
scaling_cur_freq:1804800
scaling_max_freq:1804800
As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this
bogus info started showing up as of commit c72cf0cb1d77 ("cpufreq:
qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That
commit seems to assume that everyone is on the LMH bandwagon, but
sc7180 isn't.
Let's go back to the old code in the case where LMH isn't used.
Fixes: c72cf0cb1d77 ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
[ Viresh: Fixed the 'fixes' tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes that resolve some reported problems.
These include:
- gadget driver fixes
- dwc3 driver fix
- typec driver fix
- MAINTAINERS file update.
All of these have been in linux-next with no reported problems"
* tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Don't attempt to resume the ports before they exist
usb: gadget: udc: do not clear gadget driver.bus
usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints
usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait
usb: dwc3: qcom: enable vbus override when in OTG dr-mode
MAINTAINERS: Add myself as UVC Gadget Maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial and vt fixes. These include:
- 8250 driver fixes relating to dma issues
- stm32 serial driver fix for threaded irqs
- vc_screen bugfix for reported problems.
All have been in linux-next for a while with no reported problems"
* tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
serial: 8250_dma: Fix DMA Rx rearm race
serial: 8250_dma: Fix DMA Rx completion race
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/whatever driver fixes. They
include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer)
All have been in linux-next with no reported problems"
* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
nvmem: qcom-spmi-sdam: fix module autoloading
nvmem: core: fix return value
nvmem: core: fix cell removal on error
nvmem: core: fix device node refcounting
nvmem: core: fix registration vs use race
nvmem: core: fix cleanup after dev_set_name()
nvmem: core: remove nvmem_config wp_gpio
nvmem: core: initialise nvmem->id early
nvmem: sunxi_sid: Always use 32-bit MMIO reads
nvmem: brcm_nvram: Add check for kzalloc
iio: imu: fxos8700: fix MAGN sensor scale and unit
iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
iio: imu: fxos8700: fix failed initialization ODR mode assignment
iio: imu: fxos8700: fix incorrect ODR mode readback
iio: light: cm32181: Fix PM support on system with 2 I2C resources
iio: hid: fix the retval in gyro_3d_capture_sample
iio: hid: fix the retval in accel_3d_capture_sample
iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- fix fbcon to prevent fonts bigger than 32x32 pixels to avoid
overflows reported by syzbot
- switch omapfb to use kstrtobool()
- switch some fbdev drivers to use the backlight helpers
* tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Check font dimension limits
fbdev: omapfb: Use kstrtobool() instead of strtobool()
fbdev: fbmon: fix function name in kernel-doc
fbdev: atmel_lcdfb: Rework backlight status updates
fbdev: riva: Use backlight helper
fbdev: omapfb: panel-dsi-cm: Use backlight helper
fbdev: nvidia: Use backlight helper
fbdev: mx3fb: Use backlight helper
fbdev: radeon: Use backlight helper
fbdev: atyfb: Use backlight helper
fbdev: aty128fb: Use backlight helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Here are a few fixes for 6.2. The EFI one is the most important as it
allows some RTCs to actually work. The other two are warnings that are
worth fixing.
- efi: make WAKEUP services optional
- sunplus: fix format string warning"
* tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: sunplus: fix format string for printing resource
dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property
rtc: efi: Enable SET/GET WAKEUP services as optional
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit
kernel
- pdc_iodc_print() dropped chars for newline in strings
- Drop constants in favour of PRIV_USER
- use safer strscpy() function in pdc_stable driver
* tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c
parisc: Fix return code of pdc_iodc_print()
parisc: pdc_stable: use strscpy() to instead of strncpy()
|
|
blit_x and blit_y are u32, so fbcon currently cannot support fonts
larger than 32x32.
The 32x32 case also needs shifting an unsigned int, to properly set bit
31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font",
as reported on:
http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com
Kernel Branch: 6.2.0-rc5-next-20230124
Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing
Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharing
Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Fixes: 2d2699d98492 ("fbcon: font setting should check limitation of driver")
Cc: stable@vger.kernel.org
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
In one version of the HW there is a remote possibility that it
will miss the doorbell ring. This adds a bit of protection to
be sure we don't stall a queue from a missed doorbell.
Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure the q+cq alloc for NotifyQ is clearly documented
and don't bother with unnecessary local variables.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clear the interrupt credits before enabling the queue rather
than after to be sure that the enabled queue starts at 0 and
that we don't wipe away possible credits after enabling the
queue.
Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Neel Patel <neel.patel@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jerome provided the information that also the GXL internal PHY doesn't
support MMD register access and EEE. MMD reads return 0xffff, what
results in e.g. completely wrong ethtool --show-eee output.
Therefore use the MMD dummy stubs.
Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement")
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In zynqmp platforms where firmware supports dynamic SGMII configuration
but has other non-SGMII ethernet devices, it fails them with no packets
received at the RX interface.
To fix this behaviour perform SGMII dynamic configuration only
for the SGMII phy interface.
Fixes: 32cee7818111 ("net: macb: Add zynqmp SGMII dynamic configuration support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reported-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1675340779-27499-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ff9fb72bc077 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.
Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
"A bit bigger than I'd like at this point, but mostly a bunch of little
fixes. In detail:
- NVMe pull request via Christoph:
- Fix a missing queue put in nvmet_fc_ls_create_association
(Amit Engel)
- Clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- Use workqueue dedicated to authentication (Shin'ichiro
Kawasaki)
- Fix for an overflow in ublk (Liu)
- Fix for leaking a queue reference in block cgroups (Ming)
- Fix for a use-after-free in BFQ (Yu)"
* tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux:
blk-cgroup: don't update io stat for root cgroup
nvme-auth: use workqueue dedicated to authentication
nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
block: Fix the blk_mq_destroy_queue() documentation
block: ublk: extending queue_size to fix overflow
block, bfq: fix uaf for bfqq in bic_set_bfqq()
|
|
amdgpu_sync_get_fence deletes the returned fence from the
syncobj, so the refcount of fence needs to lowered to avoid
a memory leak.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2360
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3b590ba0f11d24b8c6c39c3d38250129c1116af4.camel@web.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- handle potential mremap() failure gracefully
- don't reject EFI memory attributes table version 2
* tag 'efi-fixes-for-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix potential NULL deref in efi_mem_reserve_persistent
efi: Accept version 2 of memory attributes table
|
|
Pull drm fixes from Dave Airlie:
"A few more fixes this week, a bit more spread out though.
We have a bunch of nouveau regression and stabilisation fixes, along
with usual amdgpu, and i915. Otherwise just some minor misc ones:
dma-fence:
- fix signaling bit for private fences
panel:
- boe-tv101wum-nl6 disable fix
nouveau:
- gm20b acr regression fix
- tu102 scrub status fix
- tu102 wait for firmware fix
i915:
- Fixes for potential use-after-free and double-free
- GuC locking and refcount fixes
- Display's reference clock value fix
amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
vc4:
- fix CEC adapter names
ssd130x:
- fix display init regression"
* tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/amd/display: Properly handle additional cases where DCN is not supported
drm/amdgpu: Enable vclk dclk node for gc11.0.3
drm/amd: Fix initialization for nbio 4.3.0
drm/amdgpu: enable HDP SD for gfx 11.0.3
drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11
drm/amd/display: Reset DMUB mailbox SW state after HW reset
drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2
drm/amd/display: Adjust downscaling limits for dcn314
drm/amd/display: Add missing brackets in calculation
drm/amdgpu: update wave data type to 3 for gfx11
drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
drm/nouveau/acr/gm20b: regression fixes
drm/nouveau/fb/tu102-: fix register used to determine scrub status
drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED
drm/i915/adlp: Fix typo for reference clock
drm/i915: Fix potential bit_17 double-free
drm/i915: Fix up locking around dumping requests lists
drm/i915: Fix request ref counting during error capture & debugfs dump
drm/i915/guc: Fix locking when searching for a hung request
drm/i915: Avoid potential vm use-after-free
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes, mainly for MM. 13 are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
Kconfig.debug: fix the help description in SCHED_DEBUG
mm/swapfile: add cond_resched() in get_swap_pages()
mm: use stack_depot_early_init for kmemleak
Squashfs: fix handling and sanity checking of xattr_ids count
sh: define RUNTIME_DISCARD_EXIT
highmem: round down the address passed to kunmap_flush_on_unmap()
migrate: hugetlb: check for hugetlb shared PMD in node migration
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
freevxfs: Kconfig: fix spelling
maple_tree: should get pivots boundary by type
.mailmap: update e-mail address for Eugen Hristev
mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
squashfs: harden sanity check in squashfs_read_xattr_id_table
ia64: fix build error due to switch case label appearing next to declaration
mm: multi-gen LRU: fix crash during cgroup migration
Revert "mm: add nodes= arg to memory.reclaim"
zsmalloc: fix a race with deferred_handles storing
...
|
|
When iterating on a linked list, a result of memremap is dereferenced
without checking it for NULL.
This patch adds a check that falls back on allocating a new page in
case memremap doesn't succeed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 18df7577adae ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
[ardb: return -ENOMEM instead of breaking out of the loop]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
After calling fwnode_phy_find_device(), the phy device refcount is
incremented. Then, when the phy device is attached to a netdev with
phy_attach_direct(), the refcount is also incremented but only
decremented in the caller if phy_attach_direct() fails. Move
phy_device_free() before the "if" to always release it correctly.
Indeed, either phy_attach_direct() failed and we don't want to keep a
reference to the phydev or it succeeded and a reference has been taken
internally.
Fixes: 25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: d180e0a1be6c ("Drivers: hv: Create debugfs file with hyper-v balloon usage information")
Cc: stable <stable@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-02-01:
amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202042309.24144-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fixes for potential use-after-free and double-free (Rob)
- GuC locking and refcount fixes (John)
- Display's reference clock value fix (Chaitanya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9u5pHjOYcxzS5Z7@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for a non-unique CEC adapter name registration in vc4, a
regression breaking the display in ssd130x, a signaling bit issue in
dma-fence, a couple of fixes in nouveau for Turing and Ampere, and a
disable fix for the boe-tv101wum-nl6 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202085724.pz22m7bmei3wyuzp@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fix from Damien Le Moal:
"Fix device probe issues with some combination of adapters & devices
that do not report a current link speed, leading to device probe
failures if a link speed was not previously reported and saved (me)"
* tag 'ata-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: Fix sata_down_spd_limit() when no link speed is reported
|
|
Commit 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.
This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.
Fixes: 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Luca Di Stefano <luca.distefano@linaro.org>
Cc: 993612@bugs.debian.org
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230126-synquacer-boot-v2-1-cb80fd23c4e2@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Since Linux 5.19 this error is observed:
sysfs: cannot create duplicate filename '/devices/platform/of-display'
This is because multiple devices with the same name 'of-display' are
created on the same bus. Update the code to create numbered device names
for the displays.
Also, fix a node refcounting issue when exiting the boot display loop.
cc: linuxppc-dev@lists.ozlabs.org
References: https://bugzilla.kernel.org/show_bug.cgi?id=216095
Fixes: 52b1b46c39ae ("of: Create platform devices for OF framebuffers")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230201162247.3575506-1-robh@kernel.org
[robh: Rework to avoid node refcount leaks]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of bugfixes is once more for the NXP i.MX platform,
addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
imx8dxl power button and the USB modem on an imx7 board.
The reason that i.MX always shows up here is obviously not that they
are more buggy than the others, but they have the most boards and are
good about getting fixes in quickly.
The other DT fixes are for the Nuvoton wpcm450 flash controller and
the i2c mux on an ASpeed board.
Lastly, there are updates to the MAINTAINERS entries for Mediatek,
AMD/Seattle and NXP SoCs, as well as a lone code fix for error
handling in the allwinner 'rsb' bus driver"
* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
MAINTAINERS: Update entry for MediaTek SoC support
MAINTAINERS: amd: drop inactive Brijesh Singh
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
arm64: dts: imx8mm-verdin: Do not power down eth-phy
MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
ARM: dts: aspeed: Fix pca9849 compatible
arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- With CONFIG_VMAP_STACK enabled it is not possible to load the s390
specific diag288_wdt watchdog module. The reason is that a pointer to
a string is passed to an inline assembly; this string however is
located on the stack, while the instruction within the inline
assembly expects a physicial address. Fix this by copying the string
to a kmalloc'ed buffer.
- The diag288_wdt watchdog module does not indicate that it accesses
memory from an inline assembly, which it does. Add "memory" to the
clobber list to prevent the compiler from optimizing code incorrectly
away.
- Pass size of the uncompressed kernel image to __decompress() call.
Otherwise the kernel image decompressor may corrupt/overwrite an
initrd. This was reported to happen on s390 after commit 2aa14b1ab2c4
("zstd: import usptream v1.5.2").
* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/decompressor: specify __decompress() buf len to avoid overflow
watchdog: diag288_wdt: fix __diag288() inline assembly
watchdog: diag288_wdt: do not use stack buffers for hardware data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of AMD PMF fixes + a few other small fixes"
* tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
platform/x86/amd: pmc: add CONFIG_SERIO dependency
platform/x86/amd/pmf: Ensure mutexes are initialized before use
platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
platform/x86/amd/pmf: Fix to update SPS default pprof thermals
platform/x86/amd/pmf: update to auto-mode limits only after AMT event
platform/x86/amd/pmf: Add helper routine to check pprof is balanced
platform/x86/amd/pmf: Add helper routine to update SPS thermals
|
|
Currently there is no IRQ handling (even the SGMII supports it).
Enable polling to support SFP ports.
Fixes: 14a44ab0330d ("net: mtk_eth_soc: partially convert to phylink_pcs")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: changed "1" => "true" ]
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The logic of the duplex bit is inverted. Setting it means half
duplex, not full duplex.
Fix and rename macro to avoid confusion.
Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The code expect the PHY to be in power down which is only true after reset.
Allow changes of the SGMII parameters more than once.
Only power down when reconfiguring to avoid bouncing the link when there's
no reason to - based on code from Russell King.
There are cases when the SGMII_PHYA_PWD register contains 0x9 which
prevents SGMII from working. The SGMII still shows link but no traffic
can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
taken from a good working state of the SGMII interface.
Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: rebased and squashed into one patch ]
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
can 2023-02-02
The first patch is by Ziyang Xuan and removes a errant WARN_ON_ONCE()
in the CAN J1939 protocol.
The next 3 patches are by Oliver Hartkopp. The first 2 target the CAN
ISO-TP protocol and fix the state machine with respect to signals and
a regression found by the syzbot.
The last patch is by me an missing assignment during the ethtool ring
configuration callback.
* tag 'linux-can-fixes-for-6.2-20230202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
====================
Link: https://lore.kernel.org/r/20230202094135.2293939-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to my tests on MT7621AT and MT7623NI SoCs, hardware DSA untagging
won't work on the second MAC. Therefore, disable this feature when the
second MAC of the MT7621 and MT7623 SoCs is being used.
Fixes: 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging")
Link: https://lore.kernel.org/netdev/6249fc14-b38a-c770-36b4-5af6d41c21d3@arinc9.com/
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230128094232.2451947-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cited commit in fixes tag frees rxq xdp info while RQ NAPI is
still enabled and packet processing may be ongoing.
Follow the mirror sequence of open() in the stop() callback.
This ensures that when rxq info is unregistered, no rx
packet processing is ongoing.
Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20230202163516.12559-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UEFI v2.10 introduces version 2 of the memory attributes table, which
turns the reserved field into a flags field, but is compatible with
version 1 in all other respects. So let's not complain about version 2
if we encounter it.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if
driver has not recorded sstatus speed") changed the behavior of
sata_down_spd_limit() to return doing nothing if a drive does not report
a current link speed, to avoid reducing the link speed to the lowest 1.5
Gbps speed.
However, the change assumed that a speed was recorded before probing
(e.g. before a suspend/resume) and set in link->sata_spd. This causes
problems with adapters/drives combination failing to establish a link
speed during probe autonegotiation. One example reported of this problem
is an mvebu adapter with a 3Gbps port-multiplier box: autonegotiation
fails, leaving no recorded link speed and no reported current link
speed. Probe retries also fail as no action is taken by sata_set_spd()
after each retry.
Fix this by returning early in sata_down_spd_limit() only if we do have
a recorded link speed, that is, if link->sata_spd is not 0. With this
fix, a failed probe not leading to a recorded link speed is retried at
the lower 1.5 Gbps speed, with the link speed potentially increased
later on the second revalidate of the device if the device reports
that it supports higher link speeds.
Reported-by: Marius Dinu <marius@psihoexpert.ro>
Fixes: 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Marius Dinu <marius@psihoexpert.ro>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet,
pointing to the same chuwi_vi8_data as the existing CWI506 version
DMI match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230202103413.331459-1-hdegoede@redhat.com
|
|
This will fix null pointer dereference that was caused by
the driver attempting to resume ports that were not yet
registered.
Fixes: e0dced9c7d47 ("usb: typec: ucsi: Resume in separate work")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216697
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230131141518.78215-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
