summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-24i2c: stm32f7: fix first byte to send in slave modeFabrice Gasnier
The slave-interface documentation [1] states "the bus driver should transmit the first byte" upon I2C_SLAVE_READ_REQUESTED slave event: - 'val': backend returns first byte to be sent The driver currently ignores the 1st byte to send on this event. [1] https://www.kernel.org/doc/Documentation/i2c/slave-interface Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: mt65xx: fix NULL ptr dereferenceFabien Parent
Since commit abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183"), there is a NULL pointer dereference for all the SoCs that don't have any quirk. mtk_i2c_functionality is not checking that the quirks pointer is not NULL before starting to use it. This commit add a call to i2c_check_quirks which will check whether the quirks pointer is set, and if so will check if the IP has the NO_ZERO_LEN quirk. Fixes: abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Cengiz Can <cengiz@kernel.wtf> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Ulrich Hecht <uli@fpond.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24RDMA/nldev: Skip counter if port doesn't matchMark Zhang
The counter resource should return -EAGAIN if it was requested for a different port, this is similar to how QP works if the users provides a port filter. Otherwise port filtering in netlink will return broken counter nests. Fixes: c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback") Link: https://lore.kernel.org/r/20191020062800.8065-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-24irqchip/gic-v3-its: Use the exact ITSList for VMOVPZenghui Yu
On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0), we will map vPEs only on ITSs that will actually control interrupts for the given VM. And when moving a vPE, the VMOVP command will be issued only for those ITSs. But when issuing VMOVPs we seemed fail to present the exact ITSList to ITSs who are actually included in the synchronization operation. The its_list_map we're currently using includes all ITSs in the system, even though some of them don't have the corresponding vPE mapping at all. Introduce get_its_list() to get the per-VM its_list_map, to indicate which ITSs have vPE mappings for the given VM, and use this map as the expected ITSList when building VMOVP. This is hopefully a performance gain not to do some synchronization with those unsuspecting ITSs. And initialize the whole command descriptor to zero at beginning, since the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com
2019-10-24Merge branches 'pm-cpuidle' and 'pm-opp'Rafael J. Wysocki
* pm-cpuidle: cpuidle: haltpoll: Take 'idle=' override into account * pm-opp: opp: Reinitialize the list_kref before adding the static OPPs again opp: core: Revert "add regulators enable and disable" opp: of: drop incorrect lockdep_assert_held()
2019-10-24soundwire: slave: fix scanf formatPierre-Louis Bossart
fix cppcheck warning: [drivers/soundwire/slave.c:145]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022233147.17268-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24Merge tag 'mfd-fixes-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fix from Lee Jones: "Fix broken support for BananaPi-r2" * tag 'mfd-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: mt6397: Fix probe after changing mt6397-core
2019-10-24reset: fix of_reset_control_get_count kerneldoc commentPhilipp Zabel
Add a newline and remove a superfluous kerneldoc marker before the of_reset_control_get_count kerneldoc comment, to fix documentation build warnings: ./drivers/reset/core.c:832: warning: Incorrect use of kernel-doc format: * of_reset_control_get_count - Count number of resets available with a device ./drivers/reset/core.c:840: warning: Function parameter or member 'node' not described in 'of_reset_control_get_count' Fixes: 17c82e206d2a ("reset: Add APIs to manage array of resets") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24reset: fix of_reset_simple_xlate kerneldoc commentPhilipp Zabel
The flags parameter never made it into the API, but was erroneously included in the kerneldoc comment. Remove it to fix a documentation build warning: ./drivers/reset/core.c:86: warning: Excess function parameter 'flags' description in 'of_reset_simple_xlate' Fixes: 61fc41317666 ("reset: Add reset controller API") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24mfd: mt6397: Fix probe after changing mt6397-coreFrank Wunderlich
Part 3 from this series [1] was not merged due to wrong splitting and breaks mt6323 pmic on bananapi-r2 dmesg prints this line and at least switch is not initialized on bananapi-r2 mt6397 1000d000.pwrap:mt6323: unsupported chip: 0x0 this patch contains only the probe-changes and chip_data structs from original part 3 by Hsin-Hsiung Wang [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=164155 Fixes: a4872e80ce7d ("mfd: mt6397: Extract IRQ related code from core driver") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-23net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flagMartin Fuzzey
The LAN8740, like the 8720, also requires a reset after enabling clock. The datasheet [1] 3.8.5.1 says: "During a Hardware reset, an external clock must be supplied to the XTAL1/CLKIN signal." I have observed this issue on a custom i.MX6 based board with the LAN8740A. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/8740a.pdf Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23of: reserved_mem: add missing of_node_put() for proper ref-countingChris Goldsworthy
Commit d698a388146c ("of: reserved-memory: ignore disabled memory-region nodes") added an early return in of_reserved_mem_device_init_by_idx(), but didn't call of_node_put() on a device_node whose ref-count was incremented in the call to of_parse_phandle() preceding the early exit. Fixes: d698a388146c ("of: reserved-memory: ignore disabled memory-region nodes") Signed-off-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-23of: unittest: fix memory leak in unittest_data_addNavid Emamdoost
In unittest_data_add, a copy buffer is created via kmemdup. This buffer is leaked if of_fdt_unflatten_tree fails. The release for the unittest_data buffer is added. Fixes: b951f9dc7f25 ("Enabling OF selftest to run without machine's devicetree") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-23Merge tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixlet from Alex Williamson: "Fix (false) uninitialized variable warning (Joerg Roedel)" * tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfio: vfio/type1: Initialize resv_msi_base
2019-10-23Merge tag 'regulator-fix-v5.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "There are a few core fixes here around error handling and handling if suspend mode configuration and some driver specific fixes here but the most important change is the fix to the fixed-regulator DT schema conversion introduced during the last merge window. That fixes one of the last two errors preventing successful execution of "make dt_binding_check" which will be enormously helpful for DT schema development" * tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: Fix PMIC5 BoB min voltage regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized regulator: lochnagar: Add on_off_delay for VDDCORE regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone regulator: da9062: fix suspend_enable/disable preparation dt-bindings: fixed-regulator: fix compatible enum regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF regulator: core: make regulator_register() EPROBE_DEFER aware regulator: of: fix suspend-min/max-voltage parsing
2019-10-23drm/v3d: Fix memory leak in v3d_submit_cl_ioctlNavid Emamdoost
In the impelementation of v3d_submit_cl_ioctl() there are two memory leaks. One is when allocation for bin fails, and the other is when bin initialization fails. If kcalloc fails to allocate memory for bin then render->base should be put. Also, if v3d_job_init() fails to initialize bin->base then allocated memory for bin should be released. Fixes: a783a09ee76d ("drm/v3d: Refactor job management.") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191021185250.26130-1-navid.emamdoost@gmail.com
2019-10-23panfrost: Properly undo pm_runtime_enable when deferring a probeTomeu Vizoso
When deferring the probe because of a missing regulator, we were calling pm_runtime_disable even if pm_runtime_enable wasn't called. Move the call to pm_runtime_disable to the right place. Fixes: 635430797d3f ("drm/panfrost: Rework runtime PM initialization") Reported-by: Chen-Yu Tsai <wens@csie.org> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191023122157.32067-1-tomeu.vizoso@collabora.com
2019-10-23Merge tag 'omap-for-v5.4/fixes-rc4-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Three fixes for omaps for v5.4-rc cycle Two regression fixes for omap3 iommu. I missed applying two omap3 related iommu pdata quirks patches earlier because the kbuild test robot produced errors on them for missing dependencies. Fix ti-sysc interconnect target module driver handling for watchdog quirk. I must have tested this earlier only with watchdog service running, but clearly it does not do what it needs to do. * tag 'omap-for-v5.4/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs Link: https://lore.kernel.org/r/pull-1571848757-282222@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMUMarek Szyprowski
G3D clocks require special handling of their parent bus clock during power domain on/off sequences. Those clocks were not initially added to the sub-CMU handler, because that time there was no open-source driver for the G3D (MALI Panfrost) hardware module and it was not possible to test it. This patch fixes this issue. Parent clock for G3D hardware block is now properly preserved during G3D power domain on/off sequence. This restores proper MALI Panfrost performance broken by commit 8686764fc071 ("ARM: dts: exynos: Add G3D power domain to Exynos542x"). Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marian Mihailescu <mihailescu2m@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2019-10-23clk: samsung: exynos5433: Fix error pathsMarek Szyprowski
Add checking the value returned by samsung_clk_alloc_reg_dump() and devm_kcalloc(). While fixing this, also release all gathered clocks. Fixes: 523d3de41f02 ("clk: samsung: exynos5433: Add support for runtime PM") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> [s.nawrocki: squashed patch from K. Kozlowski adding missing slab.h header] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2019-10-23dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idleTony Lindgren
Yegor Yefremov <yegorslists@googlemail.com> reported that musb and ftdi uart can fail for the first open of the uart unless connected using a hub. This is because the first dma call done by musb_ep_program() must wait if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues with other non-dma packets before the DMA transfer is started causing at least ftdi uarts to fail to receive data. Let's fix the issue by waking up cppi41 with PM runtime calls added to cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we have musb_ep_program() continue with PIO until cppi41 is awake. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v4.9+ Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23rtlwifi: rtl_pci: Fix problem of too small skb->lenLarry Finger
In commit 8020919a9b99 ("mac80211: Properly handle SKB with radiotap only"), buffers whose length is too short cause a WARN_ON(1) to be executed. This change exposed a fault in rtlwifi drivers, which is fixed by regarding packets with skb->len <= FCS_LEN as though they are in error and dropping them. The test is now annotated as likely. Cc: Stable <stable@vger.kernel.org> # v5.0+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: 0x2720 is qu and 0x30DC is notLuca Coelho
When converting the wrong qu configurations in an earlier commit, I accidentally swapped 0x2720 and 0x30DC. Instead of converting 0x2720, I converted 0x30DC. Undo 0x30DC and convert 0x2720. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: add workaround for power gating in integrated 22000Luca Coelho
Add a workaround that forces power gating to be enabled on integrated 22000 devices. This improves power saving in certain situations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: mvm: handle iwl_mvm_tvqm_enable_txq() error returnJohannes Berg
iwl_mvm_tvqm_enable_txq() can return an error, notably if unable to allocate memory for the queue. Handle this error throughout, avoiding storing the invalid value into a u16 which later leads to a disable of an invalid queue ("queue 65524 not used", where 65524 is just -ENOMEM in a u16). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix all 9460 entries for qnjLuca Coelho
A bunch of the entries for qnj were wrong. The 9460 device doesn't exist, so update them to 9461 and 9462. There are still a bunch of other occurrences of 9460, but that will be fixed separately. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix PCI ID 0x2720 configs that should be socLuca Coelho
Some entries for PCI ID 0x2720 were using iwl9260_2ac_cfg, but the correct is to use iwl9260_2ac_cfg_soc. Fix that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23rtlwifi: Fix potential overflow on P2P codeLaura Abbott
Nicolas Waisman noticed that even though noa_len is checked for a compatible length it's still possible to overrun the buffers of p2pinfo since there's no check on the upper bound of noa_num. Bound noa_num against P2P_MAX_NOA_NUM. Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix merge damage on making QnJ exclusiveLuca Coelho
Two patches were sent out of order: one removed some conditions from an if and the other moved the code elsewhere. When sending the patch that moved the code, an older version of the original code was moved, causing the "make QnJ exclusive" code to be essentially undone. Fix that by removing the inclusive conditions from the check again. Fixes: 809805a820c6 ("iwlwifi: pcie: move some cfg mangling from trans_pcie_alloc to probe") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
:Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling
2019-10-23Merge tag 'edac_urgent_for_5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "Fix ghes_edac UAF case triggered by KASAN and DEBUG_TEST_DRIVER_REMOVE. Future pending rework of the ghes_edac instances registration will do away with the single memory controller per system model and that ugly hackery there. This is a minimal fix for stable@, courtesy of James Morse" * tag 'edac_urgent_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Fix Use after free in ghes_edac remove path
2019-10-23Merge branch 'opp/fixes' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework fixes for v5.4 from Viresh Kumar: "This contains: - Patch to revert addition of regulator enable/disable in OPP core (Marek). - Remove incorrect lockdep assert (Viresh). - Fix a kref counting issue (Viresh)." * 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Reinitialize the list_kref before adding the static OPPs again opp: core: Revert "add regulators enable and disable" opp: of: drop incorrect lockdep_assert_held()
2019-10-23opp: Reinitialize the list_kref before adding the static OPPs againViresh Kumar
The list_kref reaches a count of 0 when all the static OPPs are removed, for example when dev_pm_opp_of_cpumask_remove_table() is called, though the actual OPP table may not get freed as it may still be referenced by other parts of the kernel, like from a call to dev_pm_opp_set_supported_hw(). And if we call dev_pm_opp_of_cpumask_add_table() again at this point, we must reinitialize the list_kref otherwise the kernel will hit a WARN() in kref infrastructure for incrementing a kref with value 0. Fixes: 11e1a1648298 ("opp: Don't decrement uninitialized list_kref") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-22scsi: qla2xxx: Fix partial flash write of MBIQuinn Tran
For new adapters with multiple flash regions to write to, current code allows FW & Boot regions to be written, while other regions are blocked via sysfs. The fix is to block all flash read/write through sysfs interface. Fixes: e81d1bcbde06 ("scsi: qla2xxx: Further limit FLASH region write access from SysFS") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191022193643.7076-3-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Girish Basrur <gbasrur@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-22scsi: qla2xxx: Initialized mailbox to prevent driver load failureHimanshu Madhani
This patch fixes issue with Gen7 adapter in a blade environment where one of the ports will not be detected by driver. Firmware expects mailbox 11 to be set or cleared by driver for newer ISP. Following message is seen in the log file: [ 18.810892] qla2xxx [0000:d8:00.0]-1820:1: **** Failed=102 mb[0]=4005 mb[1]=37 mb[2]=20 mb[3]=8 [ 18.819596] cmd=2 **** [mkp: typos] Link: https://lore.kernel.org/r/20191022193643.7076-2-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-22scsi: lpfc: Honor module parameter lpfc_use_adiscDaniel Wagner
The initial lpfc_desc_set_adisc implementation in commit dea3101e0a5c ("lpfc: add Emulex FC driver version 8.0.28") enabled ADISC if cfg_use_adisc && RSCN_MODE && FCP_2_DEVICE In commit 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3") this changed to (cfg_use_adisc && RSC_MODE) || FCP_2_DEVICE and later in commit ffc954936b13 ("[SCSI] lpfc 8.3.13: FC Discovery Fixes and enhancements.") to (cfg_use_adisc && RSC_MODE) || (FCP_2_DEVICE && FCP_TARGET) A customer reports that after a devloss, an ADISC failure is logged. It turns out the ADISC flag is set even the user explicitly set lpfc_use_adisc = 0. [Sat Dec 22 22:55:58 2018] lpfc 0000:82:00.0: 2:(0):0203 Devloss timeout on WWPN 50:01:43:80:12:8e:40:20 NPort x05df00 Data: x82000000 x8 xa [Sat Dec 22 23:08:20 2018] lpfc 0000:82:00.0: 2:(0):2755 ADISC failure DID:05DF00 Status:x9/x70000 [mkp: fixed Hannes' email] Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3") Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: James Smart <james.smart@broadcom.com> Link: https://lore.kernel.org/r/20191022072112.132268-1-dwagner@suse.de Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-22bnxt_en: Avoid disabling pci device in bnxt_remove_one() for already ↵Vasundhara Volam
disabled device. With the recently added error recovery logic, the device may already be disabled if the firmware recovery is unsuccessful. In bnxt_remove_one(), check that the device is still enabled first before calling pci_disable_device(). Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Minor formatting changes in FW devlink_health_reporterVasundhara Volam
Minor formatting changes to diagnose cb for FW devlink health reporter. Suggested-by: Jiri Pirko <jiri@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Adjust the time to wait before polling firmware readiness.Vasundhara Volam
When firmware indicates that driver needs to invoke firmware reset which is common for both error recovery and live firmware reset path, driver needs a different time to wait before polling for firmware readiness. Modify the wait time to fw_reset_min_dsecs, which is initialised to correct timeout for error recovery and firmware reset. Fixes: 4037eb715680 ("bnxt_en: Add a new BNXT_FW_RESET_STATE_POLL_FW_DOWN state.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Fix devlink NVRAM related byte order related issues.Michael Chan
The current code does not do endian swapping between the devlink parameter and the internal NVRAM representation. Define a union to represent the little endian NVRAM data and add 2 helper functions to copy to and from the NVRAM data with the proper byte swapping. Fixes: 782a624d00fa ("bnxt_en: Add bnxt_en initial port params table and register it") Cc: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Fix the size of devlink MSIX parameters.Vasundhara Volam
The current code that rounds up the NVRAM parameter bit size to the next byte size for the devlink parameter is not always correct. The MSIX devlink parameters are 4 bytes and we don't get the correct size using this method. Fix it by adding a new dl_num_bytes member to the bnxt_dl_nvm_param structure which statically provides bytesize information according to the devlink parameter type definition. Fixes: 782a624d00fa ("bnxt_en: Add bnxt_en initial port params table and register it") Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22net: stmmac: Fix the problem of tso_xmityuqi jin
When the address width of DMA is greater than 32, the packet header occupies a BD descriptor. The starting address of the data should be added to the header length. Fixes: a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: yuqi jin <jinyuqi@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22dynamic_debug: provide dynamic_hex_dump stubArnd Bergmann
The ionic driver started using dymamic_hex_dump(), but that is not always defined: drivers/net/ethernet/pensando/ionic/ionic_main.c:229:2: error: implicit declaration of function 'dynamic_hex_dump' [-Werror,-Wimplicit-function-declaration] Add a dummy implementation to use when CONFIG_DYNAMIC_DEBUG is disabled, printing nothing. Fixes: 938962d55229 ("ionic: Add adminq action") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22RDMA/uverbs: Prevent potential underflowDan Carpenter
The issue is in drivers/infiniband/core/uverbs_std_types_cq.c in the UVERBS_HANDLER(UVERBS_METHOD_CQ_CREATE) function. We check that: if (attr.comp_vector >= attrs->ufile->device->num_comp_vectors) { But we don't check if "attr.comp_vector" is negative. It could potentially lead to an array underflow. My concern would be where cq->vector is used in the create_cq() function from the cxgb4 driver. And really "attr.comp_vector" is appears as a u32 to user space so that's the right type to use. Fixes: 9ee79fce3642 ("IB/core: Add completion queue (cq) object actions") Link: https://lore.kernel.org/r/20191011133419.GA22905@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22Merge branch 'misc' into fixesRussell King
2019-10-22cpufreq: Cancel policy update work scheduled before freeingSudeep Holla
Scheduled policy update work may end up racing with the freeing of the policy and unregistering the driver. One possible race is as below, where the cpufreq_driver is unregistered, but the scheduled work gets executed at later stage when, cpufreq_driver is NULL (i.e. after freeing the policy and driver). Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = (ptrval) [0000001c] *pgd=80000080204003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP THUMB2 Modules linked in: CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.4.0-rc3-00006-g67f5a8081a4b #86 Hardware name: ARM-Versatile Express Workqueue: events handle_update PC is at cpufreq_set_policy+0x58/0x228 LR is at dev_pm_qos_read_value+0x77/0xac Control: 70c5387d Table: 80203000 DAC: fffffffd Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval)) (cpufreq_set_policy) from (refresh_frequency_limits.part.24+0x37/0x48) (refresh_frequency_limits.part.24) from (handle_update+0x2f/0x38) (handle_update) from (process_one_work+0x16d/0x3cc) (process_one_work) from (worker_thread+0xff/0x414) (worker_thread) from (kthread+0xff/0x100) (kthread) from (ret_from_fork+0x11/0x28) Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [ rjw: Cancel the work before dropping the QoS requests ] Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-22s390/zcrypt: fix memleak at releaseJohan Hovold
If a process is interrupted while accessing the crypto device and the global ap_perms_mutex is contented, release() could return early and fail to free related resources. Fixes: 00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support") Cc: <stable@vger.kernel.org> # 4.19 Cc: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-22iio: imu: inv_mpu6050: fix no data on MPU6050Jean-Baptiste Maneyrol
Some chips have a fifo overflow bit issue where the bit is always set. The result is that every data is dropped. Change fifo overflow management by checking fifo count against a maximum value. Add fifo size in chip hardware set of values. Fixes: f5057e7b2dba ("iio: imu: inv_mpu6050: better fifo overflow handling") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-22Merge tag 'pinctrl-v5.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here is a bunch of pin control fixes. I was lagging behind on this one, some fixes should have come in earlier, sorry about that. Anyways here it is, pretty straight-forward fixes, the Strago fix stand out as something serious affecting a lot of machines. Summary: - Handle multiple instances of Intel chips without complaining. - Restore the Intel Strago DMI workaround - Make the Armada 37xx handle pins over 32 - Fix the polarity of the LED group on Armada 37xx - Fix an off-by-one bug in the NS2 driver - Fix error path for iproc's platform_get_irq() - Fix error path on the STMFX driver - Fix a typo in the Berlin AS370 driver - Fix up misc errors in the Aspeed 2600 BMC support - Fix a stray SPDX tag" * tag 'pinctrl-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups pinctrl: aspeed-g6: Fix UART13 group pinmux pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration pinctrl: aspeed-g6: Fix I2C14 SDA description pinctrl: aspeed-g6: Sort pins for sanity dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups pinctrl: berlin: as370: fix a typo s/spififib/spdifib pinctrl: armada-37xx: swap polarity on LED group pinctrl: stmfx: fix null pointer on remove pinctrl: iproc: allow for error from platform_get_irq() pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable() pinctrl: bcm-iproc: Use SPDX header pinctrl: armada-37xx: fix control of pins 32 and up pinctrl: cherryview: restore Strago DMI workaround for all versions pinctrl: intel: Allocate IRQ chip dynamic
2019-10-22cpuidle: haltpoll: Take 'idle=' override into accountZhenzhong Duan
Currenly haltpoll isn't aware of the 'idle=' override, the priority is 'idle=poll' > haltpoll > 'idle=halt'. When 'idle=poll' is used, cpuidle driver is bypassed but current_driver in sys still shows 'haltpoll'. When 'idle=halt' is used, haltpoll takes precedence and makes 'idle=halt' have no effect. Add a check to prevent the haltpoll driver from loading if 'idle=' is present. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Co-developed-by: Joao Martins <joao.m.martins@oracle.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 04:56:33 +0000