| Age | Commit message (Collapse) | Author |
|---|
|
Pull virtio fixes from Michael Tsirkin:
"Bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix use after free in vhost_vdpa_probe()
virtio_pci: Switch away from deprecated irq_set_affinity_hint
riscv, qemu_fw_cfg: Add support for RISC-V architecture
vdpa_sim_blk: allocate the buffer zeroed
virtio_pci: move structure to a header
|
|
In smb_reset_buffer, the sdb->buf_hw_base variable is uninitialized
before use, which initializes it in smb_init_data_buffer. And the SMB
regiester are set in smb_config_inport.
So move the call after smb_config_inport.
Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-4-hejunhao3@huawei.com
|
|
The SMB dirver register the enable/disable sysfs interface in function
smb_register_sink(), however the buffer depends on the following
configuration to work well. So it'll be possible for user to access an
unreset one.
Move the config buffer operation to before register_sink().
Ignore the return value, if smb_config_inport() fails. That will
cause the hardwares disable trace path to fail, should not affect
SMB driver remove. So we make smb_remove() return success,
Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-3-hejunhao3@huawei.com
|
|
When we to enable the SMB by perf, the perf sched will call perf_ctx_lock()
to close system preempt in event_function_call(). But SMB::enable_smb() use
mutex to lock the critical section, which may sleep.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 153023, name: perf
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffa2983f5c5f40>] copy_process+0xae8/0x2b48
softirqs last enabled at (0): [<ffffa2983f5c5f40>] copy_process+0xae8/0x2b48
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 2 PID: 153023 Comm: perf Kdump: loaded Tainted: G W O 6.5.0-rc4+ #1
Call trace:
...
__mutex_lock+0xbc/0xa70
mutex_lock_nested+0x34/0x48
smb_update_buffer+0x58/0x360 [ultrasoc_smb]
etm_event_stop+0x204/0x2d8 [coresight]
etm_event_del+0x1c/0x30 [coresight]
event_sched_out+0x17c/0x3b8
group_sched_out.part.0+0x5c/0x208
__perf_event_disable+0x15c/0x210
event_function+0xe0/0x230
remote_function+0xb4/0xe8
generic_exec_single+0x160/0x268
smp_call_function_single+0x20c/0x2a0
event_function_call+0x20c/0x220
_perf_event_disable+0x5c/0x90
perf_event_for_each_child+0x58/0xc0
_perf_ioctl+0x34c/0x1250
perf_ioctl+0x64/0x98
...
Use spinlock to replace mutex to control driver data access to one at a
time. The function copy_to_user() may sleep, it cannot be in a spinlock
context, so we can't simply replace it in smb_read(). But we can ensure
that only one user gets the SMB device fd by smb_open(), so remove the
locks from smb_read() and buffer synchronization is guaranteed by the user.
Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-2-hejunhao3@huawei.com
|
|
Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.
[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up
[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.
Fixes: efdbd2b30caa ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
representors
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
78 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
78 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
79 | fw_rev_maj(mdev), fw_rev_min(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
80 | fw_rev_sub(mdev), mdev->board_id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: cf83c8fdcd47 ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
49 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
49 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
51 | mdev->board_id);
| ~~~~~~~~~~~~~~~
Fixes: 84e11edb71de ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".
While here, add a missing space in the formatted string.
This fixes the following build warning:
$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
717 | snprintf(err_str, sizeof(err_str),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 521f31af004a ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without increased buffer size, will trigger -Wformat-truncation with W=1
for the snprintf operation writing to the buffer.
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc':
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32
295 | snprintf(irq->name, MLX5_MAX_IRQ_NAME,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: ada9f5d00797 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the
incremented consumer index after the relevant software counters in the
kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to
either overrunning the device CQ or exceeding the expected software buffer
size in the device CQ if the device CQ size was greater than the software
buffer size. Update the relevant software counter only after updating the
device CQ consumer index in the port timestamping napi_poll context.
Log:
mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1
mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04
Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the skb is available in metadata mapping to skbs before tracking the
metadata index for detecting undelivered CQEs. If the metadata index is put
in the tracking list before putting the skb in the map, the metadata index
might be used for detecting undelivered CQEs before the relevant skb is
available in the map, which can lead to a null-ptr-deref.
Log:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events mlx5e_rx_dim_work [mlx5_core]
RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07
RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206
RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005
RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028
RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383
R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40
R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? die_addr+0x3c/0xa0
? exc_general_protection+0x144/0x210
? asm_exc_general_protection+0x22/0x30
? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core]
__napi_poll.constprop.0+0xa4/0x580
net_rx_action+0x460/0xb80
? _raw_spin_unlock_irqrestore+0x32/0x60
? __napi_poll.constprop.0+0x580/0x580
? tasklet_action_common.isra.0+0x2ef/0x760
__do_softirq+0x26c/0x827
irq_exit_rcu+0xc2/0x100
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:__kmem_cache_alloc_node+0xb/0x330
Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83
RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246
RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218
RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0
RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9
R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0
R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450
? cmd_exec+0x796/0x2200 [mlx5_core]
kmalloc_trace+0x26/0xc0
cmd_exec+0x796/0x2200 [mlx5_core]
mlx5_cmd_do+0x22/0xc0 [mlx5_core]
mlx5_cmd_exec+0x17/0x30 [mlx5_core]
mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core]
? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core]
? lockdep_set_lock_cmp_fn+0x190/0x190
? process_one_work+0x659/0x1220
mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core]
process_one_work+0x730/0x1220
? lockdep_hardirqs_on_prepare+0x400/0x400
? max_active_store+0xf0/0xf0
? assign_work+0x168/0x240
worker_thread+0x70f/0x12d0
? __kthread_parkme+0xd1/0x1d0
? process_one_work+0x1220/0x1220
kthread+0x2d9/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse
---[ end trace 0000000000000000 ]---
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_sq_xmit_wqe
When SQ is a port timestamping SQ for PTP, do not access tx flags of skb
after free-ing the skb. Free the skb only after all references that depend
on it have been handled in the dropped WQE path.
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As IPSec packet offload in switchdev mode is not supported with LAG,
it's unnecessary to modify those sent-to-vport rules to the peer eswitch.
Fixes: c6c2bf5db4ea ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Referenced commit addressed endianness issue in mlx5 pedit implementation
in ad hoc manner instead of systematically treating integer values
according to their types which left pedit fields of sizes not equal to 4
and where the bytes being modified are not least significant ones broken on
big endian machines since wrong bits will be consumed during parsing which
leads to following example error when applying pedit to source and
destination MAC addresses:
[Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0)
[Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............
Treat masks and values of pedit and filter match as network byte order,
refactor pointers to them to void pointers instead of confusing u32
pointers and only cast to pointer-to-integer when reading a value from
them. Treat pedit mlx5_fields->field_mask as host byte order according to
its type u32, change the constants in fields array accordingly.
Fixes: 82198d8bcdef ("net/mlx5e: Fix endianness when calculating pedit mask first bit")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow up to the previous patch to fix the same issue for
mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc()
fails.
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail.
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: d589e785baf5e ("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When running a phase adjustment operation, the free running clock should
not be modified at all. The phase control keyword is intended to trigger an
internal servo on the device that will converge to the provided delta. A
free running counter cannot implement phase adjustment.
Fixes: 8e11a68e2e8a ("net/mlx5: Add adjphase function to support hardware-only offset control")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current check isn't aware of old devices that don't have the
relevant FW capability. This patch allows multi destination FTE
in old cards, as it was before this check.
Fixes: f6f46e7173cb ("net/mlx5: DR, Add check for multi destination FTE")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each EQ table maintains a cpumask of the already used CPUs that are mapped
to IRQs to ensure that each IRQ gets mapped to a unique CPU.
However, on IRQ release, the said cpumask is not updated by clearing the
CPU from the mask to allow future IRQ request, causing the following
error when a SF is reloaded after it has utilized all CPUs for its IRQs:
mlx5_irq_affinity_request:135:(pid 306010): Didn't find a matching IRQ.
err = -28
Thus, when releasing an IRQ, clear its mapped CPU from the used CPUs
mask, to prevent the case described above.
While at it, move the used cpumask update to the EQ layer as it is more
fitting and preserves symmetricity of the IRQ request/release API.
Fixes: a1772de78d73 ("net/mlx5: Refactor completion IRQ request/release API")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 95c337cce0e11d06a715da73e6796ade9216637f.
The revert is required due to the suspicion it cause some tests
fail and will be moved to further investigation.
Fixes: 95c337cce0e1 ("net/mlx5: DR, Supporting inline WQE when possible")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we get back ENODEV don't fail load. There are nvidia devices
that don't have display blocks and the driver should work on those.
Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/270
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115143933.261287-1-airlied@gmail.com
|
|
The Legion Go has a 2560x1600 portrait screen, with the native "up" facing
the right controller (90° CW from the rest of the device).
Signed-off-by: Brenton Simpson <appsforartists@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231114233859.274189-1-appsforartists@google.com
|
|
Currently, there is no wait for the QP suspend to complete on a modify
to SQD state. Add a wait, after the modify to SQD state, for the Suspend
Complete AE. While we are at it, update the suspend timeout value in
irdma_prep_tc_change to use IRDMA_EVENT_TIMEOUT_MS too.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231114170246.238-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Remove the modify to SQD before going to ERROR state. It is not needed.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231114170246.238-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
acpi_object *obj is unused in this function, so delete it, also
delete a unnecessary kfree(obj);
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-4-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
'attr_name_kobj' is allocated using kzalloc, but on all the error paths
it is not freed, hence we have a memory leak.
Fix the error path before kobject_init_and_add() by adding kfree().
kobject_put() must be always called after passing the object to
kobject_init_and_add(). Only the error path which is immediately next
to kobject_init_and_add() calls kobject_put() and not any other error
path after it.
Fix the error handling after kobject_init_and_add() by moving the
kobject_put() into the goto label err_other_attr_init that is already
used by all the error paths after kobject_init_and_add().
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Cc: stable@vger.kernel.org # 6.6.x: c5dbf0416000: platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
Cc: stable@vger.kernel.org # 6.6.x: 5736aa9537c9: platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ij: Added the stable dep tags]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-3-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
attr_name_kobj's memory allocation is done with mutex_lock() held, this
is not needed.
Move allocation outside of mutex_lock() so unlock is not needed when
allocation fails.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
All cases in switch-case have a same goto on error, move the return
check out of the switch. This is a cleanup.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
max_brightness is used in ideapad_kbd_bl_brightness_get() before it's set,
causing ideapad_kbd_bl_brightness_get() to return -EINVAL sometimes.
Fixes: ecaa1867b524 ("platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol")
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231114114055.6220-2-stuart.a.hayhurst@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When in the list_for_each_entry iteration, reload of p->state->settings
with a local setting from old_state will turn the list iteration into an
infinite loop.
The typical symptom when the issue happens, will be a printk message like:
"not freeing pin xx (xxx) as part of deactivating group xxx - it is
already used for some other setting".
This is a compiler-dependent problem, one instance occurred using Clang
version 10.0 on the arm64 architecture with linux version 4.19.
Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115102824.23727-1-quic_aiquny@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The usage count of struct dev_pm_info is an implementation detail that
is only available if CONFIG_PM is enabled, so printing it in a debug message
causes a build failure in configurations without PM:
In file included from include/linux/device.h:15,
from include/linux/pci.h:37,
from drivers/accel/ivpu/ivpu_pm.c:8:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active':
drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count'
254 | atomic_read(&vdev->drm.dev->power.usage_count));
| ^
include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk'
129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg'
75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \
| ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg'
253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n",
| ^~~~~~~~
The print message does not seem essential, so the easiest workaround is
to just remove it.
Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
(cherry picked from commit 1470acbef122c7e2e588f6346ce459c26d0568a2)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
|
|
Instead of the IRQ number user the struct irq_info pointer as parameter
in the internal pirq related functions. This allows to drop some calls
of info_for_irq().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Modify the internal bind- and unbind-interfaces to take a struct
irq_info parameter. When allocating a new IRQ pass the pointer from
the allocating function further up.
This will reduce the number of info_for_irq() calls and make the code
more efficient.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Instead of having a common function for allocating a single IRQ or a
consecutive number of IRQs, split up the functionality into the callers
of xen_allocate_irqs_dynamic().
This allows to handle any allocation error in xen_irq_init() gracefully
instead of panicing the system. Let xen_irq_init() return the irq_info
pointer or NULL in case of an allocation error.
Additionally set the IRQ into irq_info already at allocation time, as
otherwise the IRQ would be '0' (which is a valid IRQ number) until
being set.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Netpoll will explicilty pass the polling call with a budget of 0 to
indicate it's clearing the Tx path only. For the gve_rx_poll and
gve_xdp_poll, they were mistakenly taking the 0 budget as the indication
to do all the work. Add check to avoid the rx path and xdp path being
called when budget is 0. And also avoid napi_complete_done being called
when budget is 0 for netpoll.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Link: https://lore.kernel.org/r/20231114004144.2022268-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-11-13 (ice)
This series contains updates to ice driver only.
Arkadiusz ensures the device is initialized with valid lock status
value. He also removes range checking of dpll priority to allow firmware
to process the request; supported values are firmware dependent.
Finally, he removes setting of can change capability for pins that
cannot be changed.
Dan restores ability to load a package which doesn't contain a signature
segment.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix DDP package download for packages without signature segment
ice: dpll: fix output pin capabilities
ice: dpll: fix check for dpll input priority range
ice: dpll: fix initial lock status of dpll
====================
Link: https://lore.kernel.org/r/20231113230551.548489-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our friendly kernel test robot pointed out a couple of potential
string truncation issues. None of which were we worried about,
but can be relatively easily fixed to quiet the complaints.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310211736.66syyDpp-lkp@intel.com/
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231113183257.71110-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the qcq's interrupt index, not the irq number, to mask
the interrupt. Since the irq number can be out of range from
the number of possible interrupts, we can end up accessing
and potentially scribbling on out-of-range and/or unmapped
memory, making the kernel angry.
[ 3116.039364] BUG: unable to handle page fault for address: ffffbeea1c3edf84
[ 3116.047059] #PF: supervisor write access in kernel mode
[ 3116.052895] #PF: error_code(0x0002) - not-present page
[ 3116.058636] PGD 100000067 P4D 100000067 PUD 1001f2067 PMD 10f82e067 PTE 0
[ 3116.066221] Oops: 0002 [#1] SMP NOPTI
[ 3116.092948] RIP: 0010:iowrite32+0x9/0x76
[ 3116.190452] Call Trace:
[ 3116.193185] <IRQ>
[ 3116.195430] ? show_trace_log_lvl+0x1d6/0x2f9
[ 3116.200298] ? show_trace_log_lvl+0x1d6/0x2f9
[ 3116.205166] ? pdsc_adminq_isr+0x43/0x55 [pds_core]
[ 3116.210618] ? __die_body.cold+0x8/0xa
[ 3116.214806] ? page_fault_oops+0x16d/0x1ac
[ 3116.219382] ? exc_page_fault+0xbe/0x13b
[ 3116.223764] ? asm_exc_page_fault+0x22/0x27
[ 3116.228440] ? iowrite32+0x9/0x76
[ 3116.232143] pdsc_adminq_isr+0x43/0x55 [pds_core]
[ 3116.237627] __handle_irq_event_percpu+0x3a/0x184
[ 3116.243088] handle_irq_event+0x57/0xb0
[ 3116.247575] handle_edge_irq+0x87/0x225
[ 3116.252062] __common_interrupt+0x3e/0xbc
[ 3116.256740] common_interrupt+0x7b/0x98
[ 3116.261216] </IRQ>
[ 3116.263745] <TASK>
[ 3116.266268] asm_common_interrupt+0x22/0x27
Reported-by: Joao Martins <joao.m.martins@oracle.com>
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231113183257.71110-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tg3_tso_bug() drops a packet if it cannot be segmented for any reason.
The number of discarded frames should be incremented accordingly.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change moves [rt]x_dropped counters to tg3_napi so that they can be
updated by a single writer, race-free.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dma_rx_size can be set as low as 64. Rx budget might be higher than
that. Make sure to not overrun allocated rx buffers when budget is
larger.
Leave one descriptor unused to avoid wrap around of 'dirty_rx' vs
'cur_rx'.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Link: https://lore.kernel.org/r/d95413e44c97d4692e72cec13a75f894abeb6998.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The while loop condition verifies 'count < limit'. Neither value change
before the 'count >= limit' check. As is this check is dead code. But
code inspection reveals a code path that modifies 'count' and then goto
'drain_data' and back to 'read_again'. So there is a need to verify
count value sanity after 'read_again'.
Move 'read_again' up to fix the count limit check.
Fixes: ec222003bd94 ("net: stmmac: Prepare to add Split Header support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/d9486296c3b6b12ab3a0515fcd47d56447a07bfc.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This allows it to break the following circular locking dependency.
Aug 10 07:01:29 dg1test kernel: ======================================================
Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected
Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted
Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------
Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock:
Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:
but task is already holding lock:
Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:
which lock already depends on the new lock.
Aug 10 07:01:29 dg1test kernel:
the existing dependency chain (in reverse order) is:
Aug 10 07:01:29 dg1test kernel:
-> #3 (&event->list_lock#2){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel:
-> #2 (&device->intr.lock){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100
Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0
Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau]
Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm]
Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm]
Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm]
Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0
Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90
Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
Aug 10 07:01:29 dg1test kernel:
-> #1 (&event->refs_lock#4){....}-{2:2}:
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100
Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0
Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau]
Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm]
Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm]
Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm]
Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0
Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90
Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
Aug 10 07:01:29 dg1test kernel:
-> #0 (&fctx->lock){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240
Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel:
other info that might help us debug this:
Aug 10 07:01:29 dg1test kernel: Chain exists of:
&fctx->lock --> &device->intr.lock --> &event->list_lock#2
Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario:
Aug 10 07:01:29 dg1test kernel: CPU0 CPU1
Aug 10 07:01:29 dg1test kernel: ---- ----
Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2);
Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock);
Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2);
Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock);
Aug 10 07:01:29 dg1test kernel:
*** DEADLOCK ***
Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236:
Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:
stack backtrace:
Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10
Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
Aug 10 07:01:29 dg1test kernel: Call Trace:
Aug 10 07:01:29 dg1test kernel: <TASK>
Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90
Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110
Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240
Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700
Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc>
Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206
Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0
Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950
Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001
Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490
Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280
Aug 10 07:01:29 dg1test kernel: </TASK>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com
|
|
The r535_gsp_cmdq_get() function returns error pointers but this code
checks for NULL. Also we need to propagate the error pointer back to
the callers in r535_gsp_rpc_get(). Returning NULL will lead to a NULL
pointer dereference.
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f71996d9-d1cb-45ea-a4b2-2dfc21312d8c@kili.mountain
|
|
The if we hit the "continue" statement on the first iteration through
the loop then "handle_mux" needs to be set to NULL so we continue
looping.
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1d864f6e-43e9-43d8-9d90-30e76c9c843b@moroto.mountain
|
|
Pull in queued fixes for 6.7
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If a task completion notification (TCN) is received when there is no
outstanding task, the cqhci driver issues a "spurious TCN" warning. This
was observed to happen right after CQE error recovery.
When an error interrupt is received the driver runs recovery logic.
It halts the controller, clears all pending tasks, and then re-enables
it. On some platforms, like Intel Jasper Lake, a stale task completion
event was observed, regardless of the CQHCI_CLEAR_ALL_TASKS bit being set.
This results in either:
a) Spurious TC completion event for an empty slot.
b) Corrupted data being passed up the stack, as a result of premature
completion for a newly added task.
Rather than add a quirk for affected controllers, ensure tasks are cleared
by toggling CQHCI_ENABLE, which would happen anyway if
cqhci_clear_all_tasks() timed out. This is simpler and should be safe and
effective for all controllers.
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Reported-by: Kornel Dulęba <korneld@chromium.org>
Tested-by: Kornel Dulęba <korneld@chromium.org>
Co-developed-by: Kornel Dulęba <korneld@chromium.org>
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-7-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
A correctly operating controller should successfully halt and clear tasks.
Failure may result in errors elsewhere, so promote messages from debug to
warnings.
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-6-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
It is important that MMC_CMDQ_TASK_MGMT command to discard the queue is
successful because otherwise a subsequent reset might fail to flush the
cache first. Retry it and the previous STOP command.
Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-5-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
STOP command does not guarantee to wait while busy, but subsequent command
MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so
be sure to wait by employing mmc_poll_for_busy().
Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
