summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-01-12md: fix incorrect declaration about claim_rdev in md_import_deviceAdrian Huang
Commit fb541ca4c365 ("md: remove lock_bdev / unlock_bdev") removes wrappers for blkdev_get/blkdev_put. However, the uninitialized local static variable of pointer type 'claim_rdev' in md_import_device() is NULL, which leads to the following warning call trace: WARNING: CPU: 22 PID: 1037 at block/bdev.c:577 bd_prepare_to_claim+0x131/0x150 CPU: 22 PID: 1037 Comm: mdadm Not tainted 6.2.0-rc3+ #69 .. RIP: 0010:bd_prepare_to_claim+0x131/0x150 .. Call Trace: <TASK> ? _raw_spin_unlock+0x15/0x30 ? iput+0x6a/0x220 blkdev_get_by_dev.part.0+0x4b/0x300 md_import_device+0x126/0x1d0 new_dev_store+0x184/0x240 md_attr_store+0x80/0xf0 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x2be/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc It turns out the md device cannot be used: md: could not open device unknown-block(259,0). md: md127 stopped. Fix the issue by declaring the local static variable of struct type and passing the pointer of the variable to blkdev_get_by_dev(). Fixes: fb541ca4c365 ("md: remove lock_bdev / unlock_bdev") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2023-01-12platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if presentHans de Goede
Unlike keys where userspace only reacts to keypresses, userspace may act on switches in both (0 and 1) of their positions. For example if a SW_TABLET_MODE switch is registered then GNOME will not automatically show the onscreen keyboard when a text field gets focus on touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE reports 1 libinput will block (filter out) builtin keyboard and touchpad events. So to avoid unwanted side-effects EV_SW type inputs should only be registered if they are actually present, only register SW_CAMERA_LENS_COVER if it is actually there. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
2023-01-12platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reportingHans de Goede
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry and get the value of the switch from the status field when handling SW_CAMERA_LENS_COVER events, instead of always reporting 0. Also correctly set the initial SW_CAMERA_LENS_COVER value. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
2023-01-12platform/x86: asus-wmi: Don't load fan curves without fanThomas Weißschuh
If we do not have a fan it does not make sense to load curves for it. This removes the following warnings from the kernel log: asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19 asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19 Fixes: a2bdf10ce96e ("platform/x86: asus-wmi: Increase FAN_CURVE_BUF_LEN to 32") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-3-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: asus-wmi: Ignore fan on E410MAThomas Weißschuh
The ASUS VivoBook has a fan device described in its ACPI tables but does not actually contain any physical fan. Use the quirk to inhibit fan handling. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-2-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: asus-wmi: Add quirk wmi_ignore_fanThomas Weißschuh
Some laptops have a fan device listed in their ACPI tables but do not actually contain a fan. Introduce a quirk that can be used to override the fan detection logic. This was observed with a ASUS VivoBook E410MA running firmware E410MAB.304. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-1-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-13phy: renesas: r8a779f0-eth-serdes: Fix register settingYoshihiro Shimoda
Fix register setting which is typo in r8a779f0_eth_serdes_chan_setting(). Fixes: 742859441d44 ("phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221226064216.3895421-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCKHans de Goede
The 0x33 keycode is emitted by Fn + F6 on a ASUS FX705GE laptop. Reported-by: Nemcev Aleksey <Nemcev_Aleksey@inbox.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230112181841.84652-1-hdegoede@redhat.com
2023-01-12platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERAThomas Weißschuh
This keycode is emitted on a Asus VivoBook E410MAB with firmware E410MAB.304. The physical key has a strikken-through camera printed on it. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221216-asus-key-v1-1-45da124119a3@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()Shang XiaoJing
sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref. Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12platform/surface: aggregator: Add missing call to ssam_request_sync_free()Maximilian Luz
Although rare, ssam_request_sync_init() can fail. In that case, the request should be freed via ssam_request_sync_free(). Currently it is leaked instead. Fix this. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/surface: aggregator: Ignore command messages not intended for usMaximilian Luz
It is possible that we (the host/kernel driver) receive command messages that are not intended for us. Ignore those for now. The whole story is a bit more complicated: It is possible to enable debug output on SAM, which is sent via SSH command messages. By default this output is sent to a debug connector, with its own target ID (TID=0x03). It is possible to override the target of the debug output and set it to the host/kernel driver. This, however, does not change the original target ID of the message. Meaning, we receive messages with TID=0x03 (debug) but expect to only receive messages with TID=0x00 (host). The problem is that the different target ID also comes with a different scope of request IDs. In particular, these do not follow the standard event rules (i.e. do not fall into a set of small reserved values). Therefore, current message handling interprets them as responses to pending requests and tries to match them up via the request ID. However, these debug output messages are not in fact responses, and therefore this will at best fail to find the request and at worst pass on the wrong data as response for a request. Therefore ignore any command messages not intended for us (host) for now. We can implement support for the debug messages once we have a better understanding of them. Note that this may also provide a bit more stability and avoid some driver confusion in case any other targets want to talk to us in the future, since we don't yet know what to do with those as well. A warning for the dropped messages should suffice for now and also give us a chance of discovering new targets if they come along without any potential for bugs/instabilities. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HDMichael Klein
Add touchscreen info for the CSL Panther Tab HD. Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de> Link: https://lore.kernel.org/r/20221220121103.uiwn5l7fii2iggct@LLGMVZLB-0037 Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12USB: serial: option: add Quectel EM05-G (GR) modemDuke Xin(辛安文)
The EM05-G (GR) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-12USB: serial: option: add Quectel EM05-G (CS) modemDuke Xin(辛安文)
The EM05-G (CS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-12r8152: add vendor/device ID pair for Microsoft DevkitAndre Przywara
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other machines, Microsoft uses a custom USB device ID. Add the respective ID values to the driver. This makes Ethernet work on the MS Devkit device. The chip has been visually confirmed to be a RTL8153. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-12drm/vc4: bo: Fix drmm_mutex_init memory hogMaxime Ripard
Commit 374146cad469 ("drm/vc4: Switch to drmm_mutex_init") converted, among other functions, vc4_create_object() to use drmm_mutex_init(). However, that function is used to allocate a BO, and therefore the mutex needs to be freed much sooner than when the DRM device is removed from the system. For each buffer allocation we thus end up allocating a small structure as part of the DRM-managed mechanism that is never freed, eventually leading us to no longer having any free memory anymore. Let's switch back to mutex_init/mutex_destroy to deal with it properly. Fixes: 374146cad469 ("drm/vc4: Switch to drmm_mutex_init") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230112091243.490799-1-maxime@cerno.tech
2023-01-12drm: Optimize drm buddy top-down allocation methodArunpravin Paneer Selvam
We are observing performance drop in many usecases which include games, 3D benchmark applications,etc.. To solve this problem, We are strictly not allowing top down flag enabled allocations to steal the memory space from cpu visible region. The idea is, we are sorting each order list entries in ascending order and compare the last entry of each order list in the freelist and return the max block. This patch improves the 3D benchmark scores and solves fragmentation issues. All drm buddy selftests are verfied. drm_buddy: pass:6 fail:0 skip:0 total:6 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230112120027.3072-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com> CC: Cc: stable@vger.kernel.org # 5.18+
2023-01-12drm/ttm: Fix a regression causing kernel oops'esZack Rusin
The branch is explicitly taken if ttm == NULL which means that to avoid a null pointer reference the ttm object can not be used inside. Switch back to dst_mem to avoid kernel oops'es. This fixes kernel oops'es with any buffer objects which don't have ttm_tt, e.g. with vram based screen objects on vmwgfx. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: e3c92eb4a84f ("drm/ttm: rework on ttm_resource to use size_t type") Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230111175015.1134923-1-zack@kde.org Signed-off-by: Christian König <christian.koenig@amd.com>
2023-01-12Merge tag 'spi-fix-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: - Fixes for long standing issues with accesses to spidev->spi during teardown in the spidev userspace driver. - Rename the newly added spi-cs-setup-ns DT property to be more in line with our other delay properties before it becomes ABI. - A few driver specific fixes. * tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spidev: remove debug messages that access spidev->spi without locking spi: spidev: fix a race condition when accessing spidev->spi spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns spi: cadence: Fix busy cycles calculation spi: mediatek: Enable irq before the spi registration
2023-01-12Merge tag 'regulator-fix-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of small driver specific fixes, one of which I queued for 6.1 but didn't actually send out so has had *plenty* of testing in -next" * tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: PM8550 ldo11 regulator is an nldo regulator: da9211: Use irq handler when ready
2023-01-12Merge tag 'mtd/fixes-for-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: - cfi: Allow building spi-intel standalone to avoid build issues - parsers: scpart: Fix __udivdi3 undefined on mips - parsers: tplink_safeloader: Fix potential memory leak during parsing - Update email of Tudor Ambarus * tag 'mtd/fixes-for-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: MAINTAINERS: Update email of Tudor Ambarus mtd: cfi: allow building spi-intel standalone mtd: parsers: scpart: fix __udivdi3 undefined on mips mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()
2023-01-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten small fixes (less the one that cleaned up a reverted removal), nine in drivers of which the ufs one is the most critical. The single core patch is a minor speedup to error handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Grab the ATA port lock in sas_ata_device_link_abort() scsi: hisi_sas: Fix tag freeing for reserved tags scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery scsi: scsi_debug: Delete unreachable code in inquiry_vpd_b0() scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile scsi: core: scsi_error: Do not queue pointless abort workqueue functions scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace scsi: mpi3mr: Remove usage of dma_get_required_mask() API scsi: mpt3sas: Remove usage of dma_get_required_mask() API
2023-01-12ARM: sa1100: remove unused board filesArnd Bergmann
The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and Simpad machines were all marked as unused as there are no known users left. Remove all of these, along with references to them in defconfig files and drivers. Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600 and Jornada 720, each of which had one person still using them, with Collie also being supported in Qemu. Cc: Peter Chubb <peter.chubb@unsw.edu.au> Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12media: davinci: remove vpbe supportArnd Bergmann
The davinci dm3xx/dm644x platforms are gone now, and the remaining da8xx platforms do not use the vpbe driver, so the driver can be removed as well. Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12staging: media: remove davinci vpfe_capture driverArnd Bergmann
This driver was for the davinci dm644x and dm3xx platforms that are now removed from the kernel, so there are no more users. Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12irqchip: remove davinci aintc driverArnd Bergmann
The aintc driver was used on Davinci DM3xx and DM64xx SoCs, all of which got dropped from Linux, so this driver is orphaned as well. Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12input: remove davinci keyboard driverArnd Bergmann
The dm365evm board was removed, and no other users of this device exist. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12clk: remove davinci dm3xx driversArnd Bergmann
The davinci dm3xx machines are all removed, so the clk driver is no longer needed. The da8xx platforms are now using DT exclusively, so those drivers remain untouched. Reviewed-by: David Lechner <david@lechnology.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12ARM: davinci: drop DAVINCI_DMxxx referencesArnd Bergmann
Support for all the dm3xx/dm64xx SoCs is no longer available, so drop all other references to those. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12spi: remove omap 100K driverArnd Bergmann
The OMAP7xx/OMAP8xx support was removed since all of its boards have no remaining users. Remove its spi driver as well. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: linux-omap@vger.kernel.org Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Fabrice Crohas <fcrohas@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12fbdev: omapfb: remove unused board supportArnd Bergmann
A number of omap1 based board files got removed, so the corresponding framebuffer drivers are no longer used. The remaining ones are for ams_delta, osk and palmTE, which are still part of the mainline kernel. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: linux-omap@vger.kernel.org Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Angelo Arrifano <miknix@gmail.com> Cc: Imre Deak <imre.deak@intel.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12usb: phy: remove phy-isp1301-omap driverArnd Bergmann
With the H2 and H3 board support removed from the driver, there are actually no other users, so the entire driver can go away. Link: https://lore.kernel.org/linux-arm-kernel/20221019173437.GB41568@darkstar.musicnaut.iki.fi/ Suggested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12ARM: omap1: remove dead codeArnd Bergmann
After the removal of the unused board files, I went through the omap1 code to look for code that no longer has any callers and remove that. In particular, support for the omap7xx/omap8xx family is now completely unused, so I'm only leaving omap15xx/omap16xx/omap59xx. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: linux-omap@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12ARM: omap1: remove unused board filesArnd Bergmann
All board support that was marked as 'unused' earlier can now be removed, leaving the five machines that that still had someone using them in 2022, or that are supported in qemu. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-11net: stmmac: add aux timestamps fifo clearance waitNoor Azura Ahmad Tarmizi
Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit (ATSFC) to clear. This is to ensure no residue fifo value is being read erroneously. Fixes: f4da56529da6 ("net: stmmac: Add support for external trigger timestamping") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12scsi: hisi_sas: Set a port invalid only if there are no devices attached ↵Yihang Li
when refreshing port id Currently the driver sets the port invalid if one phy in the port is not enabled, which may cause issues in expander situation. In directly attached situation, if phy up doesn't occur in time when refreshing port id, the port is incorrectly set to invalid which will also cause disk lost. Therefore set a port invalid only if there are no devices attached to the port. Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-12scsi: hisi_sas: Use abort task set to reset SAS disks when discoveredXingui Yang
Currently clear task set is used to abort all commands remaining in the disk when the SAS disk is discovered, and if the disk is discovered by two initiators, other I_T nexuses are also affected. So use abort task set instead and take effect only on the specified I_T nexus. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-2-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-10 (ixgbe, igc, iavf) This series contains updates to ixgbe, igc, and iavf drivers. Yang Yingliang adds calls to pci_dev_put() for proper ref count tracking on ixgbe. Christopher adds setting of Toggle on Target Time bits for proper pulse per second (PPS) synchronization for igc. Daniil Tatianin fixes, likely, copy/paste issue that misreported destination instead of source for IP mask for iavf error. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf/iavf_main: actually log ->src mask when talking about it igc: Fix PPS delta between two synchronized end-points ixgbe: fix pci device refcount leak ==================== Link: https://lore.kernel.org/r/20230110223825.648544-1-anthony.l.nguyen@intel.com Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11bnxt: make sure we return pages to the poolJakub Kicinski
Before the commit under Fixes the page would have been released from the pool before the napi_alloc_skb() call, so normal page freeing was fine (released page == no longer in the pool). After the change we just mark the page for recycling so it's still in the pool if the skb alloc fails, we need to recycle. Same commit added the same bug in the new bnxt_rx_multi_page_skb(). Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11net: hns3: fix wrong use of rss size during VF rss configJie Wang
Currently, it used old rss size to get current tc mode. As a result, the rss size is updated, but the tc mode is still configured based on the old rss size. So this patch fixes it by using the new rss size in both process. Fixes: 93969dc14fcd ("net: hns3: refactor VF rss init APIs with new common rss init APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11irqchip: Use irq_domain_alloc_irqs()Johan Hovold
Use the irq_domain_alloc_irqs() wrapper instead of the full __irq_domain_alloc_irqs() interface, which was only intended for some legacy (x86) use cases. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20221213140844.15470-2-johan+linaro@kernel.org
2023-01-11drm/msm/gpu: Fix potential double-freeRob Clark
If userspace was calling the MSM_SET_PARAM ioctl on multiple threads to set the COMM or CMDLINE param, it could trigger a race causing the previous value to be kfree'd multiple times. Fix this by serializing on the gpu lock. Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: d4726d770068 ("drm/msm: Add a way to override processes comm/cmdline") Patchwork: https://patchwork.freedesktop.org/patch/517778/ Link: https://lore.kernel.org/r/20230110212903.1925878-1-robdclark@gmail.com
2023-01-11adreno: Shutdown the GPU properlyJoel Fernandes (Google)
During kexec on ARM device, we notice that device_shutdown() only calls pm_runtime_force_suspend() while shutting down the GPU. This means the GPU kthread is still running and further, there maybe active submits. This causes all kinds of issues during a kexec reboot: Warning from shutdown path: [ 292.509662] WARNING: CPU: 0 PID: 6304 at [...] adreno_runtime_suspend+0x3c/0x44 [ 292.509863] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 292.509872] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 292.509881] pc : adreno_runtime_suspend+0x3c/0x44 [ 292.509891] lr : pm_generic_runtime_suspend+0x30/0x44 [ 292.509905] sp : ffffffc014473bf0 [...] [ 292.510043] Call trace: [ 292.510051] adreno_runtime_suspend+0x3c/0x44 [ 292.510061] pm_generic_runtime_suspend+0x30/0x44 [ 292.510071] pm_runtime_force_suspend+0x54/0xc8 [ 292.510081] adreno_shutdown+0x1c/0x28 [ 292.510090] platform_shutdown+0x2c/0x38 [ 292.510104] device_shutdown+0x158/0x210 [ 292.510119] kernel_restart_prepare+0x40/0x4c And here from GPU kthread, an SError OOPs: [ 192.648789] el1h_64_error+0x7c/0x80 [ 192.648812] el1_interrupt+0x20/0x58 [ 192.648833] el1h_64_irq_handler+0x18/0x24 [ 192.648854] el1h_64_irq+0x7c/0x80 [ 192.648873] local_daif_inherit+0x10/0x18 [ 192.648900] el1h_64_sync_handler+0x48/0xb4 [ 192.648921] el1h_64_sync+0x7c/0x80 [ 192.648941] a6xx_gmu_set_oob+0xbc/0x1fc [ 192.648968] a6xx_hw_init+0x44/0xe38 [ 192.648991] msm_gpu_hw_init+0x48/0x80 [ 192.649013] msm_gpu_submit+0x5c/0x1a8 [ 192.649034] msm_job_run+0xb0/0x11c [ 192.649058] drm_sched_main+0x170/0x434 [ 192.649086] kthread+0x134/0x300 [ 192.649114] ret_from_fork+0x10/0x20 Fix by calling adreno_system_suspend() in the device_shutdown() path. [ Applied Rob Clark feedback on fixing adreno_unbind() similarly, also tested as above. ] Cc: Rob Clark <robdclark@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ricardo Ribalda <ribalda@chromium.org> Cc: Ross Zwisler <zwisler@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/517633/ Link: https://lore.kernel.org/r/20230109222547.1368644-1-joel@joelfernandes.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-01-11drm/i915/gt: Cover rest of SVG unit MCR registersGustavo Sousa
CHICKEN_RASTER_{1,2} got overlooked with the move done in commit a9e69428b1b4 ("drm/i915: Define MCR registers explicitly"). Registers from the SVG unit became multicast as of Xe_HP graphics. BSpec: 66534 Fixes: a9e69428b1b4 ("drm/i915: Define MCR registers explicitly") Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230105133701.19556-1-gustavo.sousa@intel.com (cherry picked from commit 10903b0a0f4d4964b352fa3df12d3d2ef5fb7a3b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-11spi: Merge rename of spi-cs-setup-ns DT propertyMark Brown
The newly added spi-cs-setup-ns doesn't really fit with the existing property names for delays, rename it so that it does before it makes it into a release and becomes ABI.
2023-01-11spi: spidev: remove debug messages that access spidev->spi without lockingBartosz Golaszewski
The two debug messages in spidev_open() dereference spidev->spi without taking the lock and without checking if it's not null. This can lead to a crash. Drop the messages as they're not needed - the user-space will get informed about ENOMEM with the syscall return value. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230106100719.196243-2-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-11spi: spidev: fix a race condition when accessing spidev->spiBartosz Golaszewski
There's a spinlock in place that is taken in file_operations callbacks whenever we check if spidev->spi is still alive (not null). It's also taken when spidev->spi is set to NULL in remove(). This however doesn't protect the code against driver unbind event while one of the syscalls is still in progress. To that end we need a lock taken continuously as long as we may still access spidev->spi. As both the file ops and the remove callback are never called from interrupt context, we can replace the spinlock with a mutex. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230106100719.196243-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-11Merge tag 'mlx5-fixes-2023-01-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-fixes-2023-01-09
2023-01-11drm/nouveau: Remove file nouveau_fbcon.cThomas Zimmermann
Commit 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers") converted nouveau to generic fbdev emulation. The driver's internal implementation later got accidentally restored during a merge commit. Remove the file from the driver. No functional changes. v2: * point Fixes tag to merge commit (Alex) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Fixes: 4e291f2f5853 ("Merge tag 'drm-misc-next-2022-11-10-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next") Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20230110123526.28770-1-tzimmermann@suse.de
generated by cgit (git 2.34.1) at 2025-09-24 09:27:50 +0000