summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-07-26perf: qcom_l2: fix column exclusion checkNeil Leeder
The check for column exclusion did not verify that the event being checked was an L2 event, and not a software event. Software events should not be checked for column exclusion. This resulted in a group with both software and L2 events sometimes incorrectly rejecting the L2 event for column exclusion and not counting it. Add a check for PMU type before applying column exclusion logic. Fixes: 21bdbb7102edeaeb ("perf: add qcom l2 cache perf events driver") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Neil Leeder <nleeder@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-25net: ethernet: nb8800: Handle all 4 RGMII modes identicallyMarc Gonzalez
Before commit bf8f6952a233 ("Add blurb about RGMII") it was unclear whose responsibility it was to insert the required clock skew, and in hindsight, some PHY drivers got it wrong. The solution forward is to introduce a new property, explicitly requiring skew from the node to which it is attached. In the interim, this driver will handle all 4 RGMII modes identically (no skew). Fixes: 52dfc8301248 ("net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller") Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25Revert "netvsc: optimize calculation of number of slots"stephen hemminger
The logic for computing page buffer scatter does not take into account the impact of compound pages. Therefore the optimization to compute number of slots was incorrect and could cause stack corruption a skb was sent with lots of fragments from huge pages. This reverts commit 60b86665af0dfbeebda8aae43f0ba451cd2dcfe5. Fixes: 60b86665af0d ("netvsc: optimize calculation of number of slots") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25ftgmac100: return error in ftgmac100_alloc_rx_bufJoel Stanley
The error paths set err, but it's not returned. I wondered if we should fix all of the callers to check the returned value, but Ben explains why the code is this way: > Most call sites ignore it on purpose. There's nothing we can do if > we fail to get a buffer at interrupt time, so we point the buffer to > the scratch page so the HW doesn't DMA into lalaland and lose the > packet. > > The one call site that tests and can fail is the one used when brining > the interface up. If we fail to allocate at that point, we fail the > ifup. But as you noticed, I do have a bug not returning the error. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes. The transfer size fixes are actually correcting some performance drops on the hpsa and smartpqi cards. The cards actually have an internal cache for request speed up but bypass it for transfers > 1MB. Since 4.3 the efficiency of our merges has rendered the cache mostly unused, so limit transfers to under 1MB to recover the cache boost" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: fix static checker warning in sg_is_valid_dxfer scsi: smartpqi: limit transfer length to 1MB scsi: hpsa: limit transfer length to 1MB
2017-07-25Merge tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuidLinus Torvalds
Pull uuid fixes from Christoph Hellwig: - add a missing "!" in the uuid tests - remove the last remaining user of the uuid_be type, and then the type and its helpers * tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid: uuid: remove uuid_be thunderbolt: use uuid_t instead of uuid_be uuid: fix incorrect uuid_equal conversion in test_uuid_test
2017-07-25Merge tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping fixes from Christoph Hellwig: "split the global dma coherent pool from the per-device pool. This fixes a regression in the earlier 4.13 pull requests where the global pool would override a per-device CMA pool (Vladimir Murzin)" * tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping: ARM: NOMMU: Wire-up default DMA interface dma-coherent: introduce interface for default DMA pool
2017-07-26mailbox: pcc: Fix crash when request PCC channel 0Hoan Tran
When PCCT is not available, kernel crashes as below when requests PCC channel 0. This patch fixes this issue. [ 0.920454] PCCT header not found. ... [ 8.031309] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [ 8.031310] [0000000000000010] user address but active_mm is swapper [ 8.031312] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 8.031313] Modules linked in: [ 8.031316] CPU: 31 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-rc1 #18 [ 8.031317] Hardware name: AppliedMicro(R) 07/20/2017 [ 8.031318] task: ffff809ef3b08000 task.stack: ffff809ef3b10000 [ 8.031322] PC is at pcc_mbox_request_channel+0x8c/0x160 [ 8.031325] LR is at xgene_slimpro_i2c_probe+0x1c0/0x378 [ 8.031326] pc : [<ffff000008899450>] lr : [<ffff000008819dac>] pstate: 00000045 [ 8.031327] sp : ffff809ef3b13bd0 [ 8.031327] x29: ffff809ef3b13bd0 x28: ffff000008ed90a0 [ 8.031329] x27: ffff000009091000 x26: ffff000008e50470 [ 8.031330] x25: ffff000008ed9100 x24: ffff809eefd9ac30 [ 8.031332] x23: 0000000000000000 x22: ffff0000090e3e10 [ 8.031333] x21: ffff0000090e3000 x20: 0000000000000000 [ 8.031335] x19: 0000000000000000 x18: 0000000000087ffc [ 8.031336] x17: 2fe48d76a78303f0 x16: 0000000000087ffc [ 8.031337] x15: ffff000000000000 x14: 0000000000000000 [ 8.031339] x13: 0000000000000000 x12: 0000000000000018 [ 8.031340] x11: 0000000000000018 x10: 0101010101010101 [ 8.031342] x9 : 0000000000000000 x8 : 7f7f7f7f7f7f7f7f [ 8.031343] x7 : fefefefeff6b646d x6 : 0000008080808080 [ 8.031345] x5 : 0000000000000000 x4 : 0000000000000001 [ 8.031346] x3 : 0000000000000000 x2 : ffff000008819b64 [ 8.031348] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 8.031393] Call trace: [ 8.031394] Exception stack(0xffff809ef3b13a00 to 0xffff809ef3b13b30) [ 8.031395] 3a00: 0000000000000000 0001000000000000 ffff809ef3b13bd0 ffff000008899450 [ 8.031397] 3a20: ffff809f7e1f9a10 ffff000008f60be0 0000000000000001 ffff809ef3b13b7c [ 8.031398] 3a40: ffff809f7e1f9a10 0000000000000000 ffff000009091000 0000000000000003 [ 8.031399] 3a60: ffff000009091000 0000000000000003 ffff809ef3b13a80 ffff0000084e0794 [ 8.031400] 3a80: ffff809ef3b13a90 ffff00000850bb64 ffff809ef3b13ad0 ffff00000850bf34 [ 8.031402] 3aa0: 0000000000000000 0000000000000000 ffff000008819b64 0000000000000000 [ 8.031403] 3ac0: 0000000000000001 0000000000000000 0000008080808080 fefefefeff6b646d [ 8.031404] 3ae0: 7f7f7f7f7f7f7f7f 0000000000000000 0101010101010101 0000000000000018 [ 8.031405] 3b00: 0000000000000018 0000000000000000 0000000000000000 ffff000000000000 [ 8.031406] 3b20: 0000000000087ffc 2fe48d76a78303f0 [ 8.031409] [<ffff000008899450>] pcc_mbox_request_channel+0x8c/0x160 [ 8.031410] [<ffff000008819dac>] xgene_slimpro_i2c_probe+0x1c0/0x378 [ 8.031413] [<ffff0000085e84dc>] platform_drv_probe+0x50/0xbc [ 8.031414] [<ffff0000085e68a4>] driver_probe_device+0x21c/0x2d0 [ 8.031416] [<ffff0000085e6a04>] __driver_attach+0xac/0xb0 [ 8.031417] [<ffff0000085e4a78>] bus_for_each_dev+0x58/0x98 [ 8.031418] [<ffff0000085e61e4>] driver_attach+0x20/0x28 [ 8.031419] [<ffff0000085e5e0c>] bus_add_driver+0x1c8/0x22c [ 8.031421] [<ffff0000085e7324>] driver_register+0x60/0xf4 [ 8.031422] [<ffff0000085e8420>] __platform_driver_register+0x4c/0x54 [ 8.031425] [<ffff000008e96dd0>] xgene_slimpro_i2c_driver_init+0x18/0x20 [ 8.031426] [<ffff000008083144>] do_one_initcall+0x38/0x124 [ 8.031429] [<ffff000008e50d0c>] kernel_init_freeable+0x190/0x22c [ 8.031431] [<ffff0000089eac30>] kernel_init+0x10/0xfc [ 8.031432] [<ffff000008082ec0>] ret_from_fork+0x10/0x50 [ 8.031434] Code: cb030e63 8b030013 b140067f 54fffda8 (f9400a61) [ 8.031448] ---[ end trace 14eb48a4e1e1f9fb ]--- Signed-off-by: Hoan Tran <hotran@apm.com> Acked-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26ACPI / watchdog: Fix init failure with overlapping register regionsRyan Kennedy
Partially overlapping regions cause platform device creation to fail. The latter of two overlapping resources will fail to be reserved. Fix this by merging overlapping resource ranges while enumerating WDAT table entries. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-25MD: fix warnning for UP caseShaohua Li
spin_is_locked always returns 0 for UP case, so ignores it Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-25Merge branch 'stable/for-jens-4.13' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Pull xen-blkfront fixes from Konrad for 4.13.
2017-07-25drm/amd/powerplay: fix AVFS voltage offset for Vega10Eric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-25drm/amdgpu/gfx9: simplify and fix GRBM index selectionNicolai Hähnle
Copy the approach taken by gfx8, which simplifies the code, and set the instance index properly. The latter is required for debugging, e.g. for reading wave status by UMR. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-25drm/amdgpu: Fix blocking in RCU critical section(v2)Alex Xie
In RCU read-side critical sections, blocking or sleeping is prohibited. v2: Unlock RCU for the code path where result==NULL. (David Zhou) Update subject Tested-by and reported by: Dave Airlie <airlied@redhat.com> [ 141.965723] ============================= [ 141.965724] WARNING: suspicious RCU usage [ 141.965726] 4.12.0-rc7 #221 Not tainted [ 141.965727] ----------------------------- [ 141.965728] /home/airlied/devel/kernel/linux-2.6/include/linux/rcupdate.h:531 Illegal context switch in RCU read-side critical section! [ 141.965730] other info that might help us debug this: [ 141.965731] rcu_scheduler_active = 2, debug_locks = 0 [ 141.965732] 1 lock held by amdgpu_cs:0/1332: [ 141.965733] #0: (rcu_read_lock){......}, at: [<ffffffffa01a0d07>] amdgpu_bo_list_get+0x0/0x109 [amdgpu] [ 141.965774] stack backtrace: [ 141.965776] CPU: 6 PID: 1332 Comm: amdgpu_cs:0 Not tainted 4.12.0-rc7 #221 [ 141.965777] Hardware name: To be filled by O.E.M. To be filled by O.E.M./M5A97 R2.0, BIOS 2603 06/26/2015 [ 141.965778] Call Trace: [ 141.965782] dump_stack+0x68/0x92 [ 141.965785] lockdep_rcu_suspicious+0xf7/0x100 [ 141.965788] ___might_sleep+0x56/0x1fc [ 141.965790] __might_sleep+0x68/0x6f [ 141.965793] __mutex_lock+0x4e/0x7b5 [ 141.965817] ? amdgpu_bo_list_get+0xa4/0x109 [amdgpu] [ 141.965820] ? lock_acquire+0x125/0x1b9 [ 141.965844] ? amdgpu_bo_list_set+0x464/0x464 [amdgpu] [ 141.965846] mutex_lock_nested+0x16/0x18 [ 141.965848] ? mutex_lock_nested+0x16/0x18 [ 141.965872] amdgpu_bo_list_get+0xa4/0x109 [amdgpu] [ 141.965895] amdgpu_cs_ioctl+0x4a0/0x17dd [amdgpu] [ 141.965898] ? radix_tree_node_alloc.constprop.11+0x77/0xab [ 141.965916] drm_ioctl+0x264/0x393 [drm] [ 141.965939] ? amdgpu_cs_find_mapping+0x83/0x83 [amdgpu] [ 141.965942] ? trace_hardirqs_on_caller+0x16a/0x186 Signed-off-by: Alex Xie <AlexBin.Xie@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-25nbd: clear disconnected on reconnectJosef Bacik
If our device loses its connection for longer than the dead timeout we will set NBD_DISCONNECTED in order to quickly fail any pending IO's that flood in after the IO's that were waiting during the dead timer. However if we re-connect at some point in the future we'll still see this DISCONNECTED flag set if we then lose our connection again after that, which means we won't get notifications for our newly lost connections. Fix this by just clearing the DISCONNECTED flag on reconnect in order to make sure everything works as it's supposed to. Reported-by: Dan Melnic <dmm@fb.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-25dm zoned: remove test for impossible REQ_OP_FLUSH conditionsMikulas Patocka
The value REQ_OP_FLUSH is only used by the block code for request-based devices. Remove the tests for REQ_OP_FLUSH from the bio-based dm-zoned-target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm raid: bump target versionHeinz Mauelshagen
Bumo dm-raid target version to 1.12.1 to reflect that commit cc27b0c78c ("md: fix deadlock between mddev_suspend() and md_write_start()") is available. This version change allows userspace to detect that MD fix is available. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm raid: avoid mddev->suspended accessHeinz Mauelshagen
Use runtime flag to ensure that an mddev gets suspended/resumed just once. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm raid: fix activation check in validate_raid_redundancy()Heinz Mauelshagen
During growing reshapes (i.e. stripes being added to a raid set), the new stripe images are not in-sync and not part of the raid set until the reshape is started. LVM2 has to request multiple table reloads involving superblock updates in order to reflect proper size of SubLVs in the cluster. Before a stripe adding reshape starts, validate_raid_redundancy() fails as a result of that because it checks the total number of devices against the number of rebuild ones rather than the actual ones in the raid set (as retrieved from the superblock) thus resulting in failed raid4/5/6/10 redundancy checks. E.g. convert 3 stripes -> 7 stripes raid5 (which only allows for maximum 1 device to fail) requesting +4 delta disks causing 4 devices to rebuild during reshaping thus failing activation. To fix this, move validate_raid_redundancy() to get access to the current raid_set members. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm raid: remove WARN_ON() in raid10_md_layout_to_format()Heinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25nvme-pci: fix HMB size calculationChristoph Hellwig
It's possible the preferred HMB size may not be a multiple of the chunk_size. This patch moves len to function scope and uses that in the for loop increment so the last iteration doesn't cause the total size to exceed the allocated HMB size. Based on an earlier patch from Keith Busch. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
2017-07-25nvme-fc: revise TRADDR parsingJames Smart
The FC-NVME spec hasn't locked down on the format string for TRADDR. Currently the spec is lobbying for "nn-<16hexdigits>:pn-<16hexdigits>" where the wwn's are hex values but not prefixed by 0x. Most implementations so far expect a string format of "nn-0x<16hexdigits>:pn-0x<16hexdigits>" to be used. The transport uses the match_u64 parser which requires a leading 0x prefix to set the base properly. If it's not there, a match will either fail or return a base 10 value. The resolution in T11 is pushing out. Therefore, to fix things now and to cover any eventuality and any implementations already in the field, this patch adds support for both formats. The change consists of replacing the token matching routine with a routine that validates the fixed string format, and then builds a local copy of the hex name with a 0x prefix before calling the system parser. Note: the same parser routine exists in both the initiator and target transports. Given this is about the only "shared" item, we chose to replicate rather than create an interdendency on some shared code. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25nvme-fc: address target disconnect race conditions in fcp io submitJames Smart
There are cases where threads are in the process of submitting new io when the LLDD calls in to remove the remote port. In some cases, the next io actually goes to the LLDD, who knows the remoteport isn't present and rejects it. To properly recovery/restart these i/o's we don't want to hard fail them, we want to treat them as temporary resource errors in which a delayed retry will work. Add a couple more checks on remoteport connectivity and commonize the busy response handling when it's seen. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25nvme: also provide a UUID in the WWID sysfs attributeJohannes Thumshirn
The WWID sysfs attribute can provide multiple means of a World Wide ID for a NVMe device. It can either be a NGUID, a EUI-64 or a concatenation of VID, Serial Number, Model and the Namespace ID in this order of preference. If the target also sends us a UUID use the UUID for identification and give it the highest priority. This eases generation of /dev/disk/by-* symlinks. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - regression fix (missing IRQs) for devices that require 'always poll' quirk, from Dmitry Torokhov - new device ID addition to Ortek driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: ortek: add one more buggy device HID: usbhid: fix "always poll" quirk
2017-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: set change and reference bit on lazy key enablement s390: chp: handle CRW_ERC_INIT for channel-path status change s390/perf: fix problem state detection
2017-07-25xen/blkfront: always allocate grants first from per-queue persistent grantsDongli Zhang
This patch partially reverts 3df0e50 ("xen/blkfront: pseudo support for multi hardware queues/rings"). The xen-blkfront queue/ring might hang due to grants allocation failure in the situation when gnttab_free_head is almost empty while many persistent grants are reserved for this queue/ring. As persistent grants management was per-queue since 73716df ("xen/blkfront: make persistent grants pool per-queue"), we should always allocate from persistent grants first. Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-07-25xen-blkfront: fix mq start/stop raceJunxiao Bi
When ring buf full, hw queue will be stopped. While blkif interrupt consume request and make free space in ring buf, hw queue will be started again. But since start queue is protected by spin lock while stop not, that will cause a race. interrupt: process: blkif_interrupt() blkif_queue_rq() kick_pending_request_queues_locked() blk_mq_start_stopped_hw_queues() clear_bit(BLK_MQ_S_STOPPED, &hctx->state) blk_mq_stop_hw_queue(hctx) blk_mq_run_hw_queue(hctx, async) If ring buf is made empty in this case, interrupt will never come, then the hw queue will be stopped forever, all processes waiting for the pending io in the queue will hung. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-07-25dm bufio: fix error code in dm_bufio_write_dirty_buffers()Dan Carpenter
We should be returning normal negative error codes here. The "a" variables comes from &c->async_write_error which is a blk_status_t converted to a regular error code. In the current code, the blk_status_t gets propogated back to pool_create() and eventually results in an Oops. Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm integrity: test for corrupted disk format during table loadMikulas Patocka
If the dm-integrity superblock was corrupted in such a way that the journal_sections field was zero, the integrity target would deadlock because it would wait forever for free space in the journal. Detect this situation and refuse to activate the device. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: 7eada909bfd7 ("dm: add integrity target") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm integrity: WARN_ON if variables representing journal usage get out of syncMikulas Patocka
If this WARN_ON triggers it speaks to programmer error, and likely implies corruption, but no released kernel should trigger it. This WARN_ON serves to assist DM integrity developers as changes are made/tested in the future. BUG_ON is excessive for catching programmer error, if a user or developer would like warnings to trigger a panic, they can enable that via /proc/sys/kernel/panic_on_warn Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25virtio-net: fix module unloadingAndrew Jones
Unregister the driver before removing multi-instance hotplug callbacks. This order avoids the warning issued from __cpuhp_remove_state_cpuslocked when the number of remaining instances isn't yet zero. Fixes: 8017c279196a ("net/virtio-net: Convert to hotplug state machine") Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-25virtio-balloon: coding format cleanupWei Wang
Clean up the comment format. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-25virtio-balloon: deflate via a page listLiang Li
This patch saves the deflated pages to a list, instead of the PFN array. Accordingly, the balloon_pfn_to_page() function is removed. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-25virtio_blk: Use sysfs_match_string() helperAndy Shevchenko
Use sysfs_match_string() helper instead of open coded variant. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2017-07-25iommu/amd: Enable ga_log_intr when enabling guest_modeSuravee Suthikulpanit
IRTE[GALogIntr] bit should set when enabling guest_mode, which enables IOMMU to generate entry in GALog when IRTE[IsRun] is not set, and send an interrupt to notify IOMMU driver. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org # v4.9+ Fixes: d98de49a53e48 ('iommu/amd: Enable vAPIC interrupt remapping mode by default') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-07-25Merge branch 'for-joerg/arm-smmu/fixes' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
2017-07-25Merge branch 'linux-4.13' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
two more fixes for issues nouveau found in fedora 26. * 'linux-4.13' of git://github.com/skeggsb/linux: drm/nouveau/bar/gf100: fix access to upper half of BAR2 drm/nouveau/disp/nv50-: bump max chans to 21
2017-07-25drm/nouveau/bar/gf100: fix access to upper half of BAR2Ben Skeggs
Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # 4.3+
2017-07-25drm/nouveau/disp/nv50-: bump max chans to 21Ilia Mirkin
GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff15f ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-25drm/i915/gvt: Extend KBL platform support in GVT-gJian Jun Chen
Extend KBL platform support in GVT-g. Validation tests are done on KBL server and KBL NUC. Both show the same quality. Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-07-24scsi: qedi: Fix return code in qedi_ep_connect()Dan Carpenter
We shouldn't be writing over the "ret" variable. It means we return ERR_PTR(0) which is NULL and it results in a NULL dereference in the caller. Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: lpfc: fix linking against modular NVMe supportArnd Bergmann
When LPFC is built-in but NVMe is a loadable module, we fail to link the kernel: drivers/scsi/built-in.o: In function `lpfc_nvme_create_localport': (.text+0x156a82): undefined reference to `nvme_fc_register_localport' drivers/scsi/built-in.o: In function `lpfc_nvme_destroy_localport': (.text+0x156eaa): undefined reference to `nvme_fc_unregister_remoteport' We can avoid this either by forcing lpfc to be a module, or by disabling NVMe support in this case. This implements the former. Fixes: 7d7080335f8d ("scsi: lpfc: Finalize Kconfig options for nvme") Cc: stable@vger.kernel.org Link: https://patchwork.kernel.org/patch/9636569/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: scsi_transport_fc: return -EBUSY for deleted vportHannes Reinecke
When trying to delete a vport via 'vport_delete' sysfs attribute we should be checking if the port is already in state VPORT_DELETING; if so there's no need to do anything. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: libcxgbi: add check for valid cxgbi_task_dataVarun Prakash
In error case it is possible that ->cleanup_task() gets called without calling ->alloc_pdu() in this case cxgbi_task_data is not valid, so add a check for for valid cxgbi_task_data in cxgbi_cleanup_task(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: aic7xxx: fix firmware build with O=pathJakub Kicinski
Building firmware with O=path was apparently broken in aic7 for ever. Message of the previous commit to the Makefile (from 2008) mentions this unfortunate state of affairs already. Fix this, mostly to make randconfig builds more reliable. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusionShu Wang
Found this issue by kmemleak, a few kb mem was leaked in megasas_alloc_cmdlist_fusion when kzalloc failed for one megasas_cmd_fusion allocation. unreferenced object 0xffff88045dbd2000 (size 8192): comm "systemd-udevd", pid 323, jiffies 4294671759 (age 49.008s) backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff812186a8>] __kmalloc+0xe8/0x220 [<ffffffffc0060594>] megasas_alloc_cmdlist_fusion+0x34/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x34 0xd5c4 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:443). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 unreferenced object 0xffff880454ce3600 (size 192): backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffffc00605d7>] megasas_alloc_cmdlist_fusion+0x77/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x77 0xd607 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:450). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 Signed-off-by: Shu Wang <shuwang@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: qedi: Add ISCSI_BOOT_SYSFS to KconfigNilesh Javali
qedi uses iscsi_boot_sysfs to export the targets used for boot to sysfs. Select the config option to make sure the module is built. This addresses the compile time issue, drivers/scsi/qedi/qedi_main.o: In function `qedi_remove': qedi_main.c:(.text+0x3bbd): undefined reference to `iscsi_boot_destroy_kset' drivers/scsi/qedi/qedi_main.o: In function `__qedi_probe.constprop.0': qedi_main.c:(.text+0x577a): undefined reference to `iscsi_boot_create_target' qedi_main.c:(.text+0x5807): undefined reference to `iscsi_boot_create_target' qedi_main.c:(.text+0x587f): undefined reference to `iscsi_boot_create_initiator' qedi_main.c:(.text+0x58f3): undefined reference to `iscsi_boot_create_ethernet' qedi_main.c:(.text+0x5927): undefined reference to `iscsi_boot_destroy_kset' qedi_main.c:(.text+0x5d7b): undefined reference to `iscsi_boot_create_host_kset' [mkp: fixed whitespace] Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Fixes: c57ec8fb7c02 ("scsi: qedi: Add support for Boot from SAN over iSCSI offload") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24ftgmac100: Make the MDIO bus a child of the ethernet deviceBenjamin Herrenschmidt
Populate mii_bus->parent with our own platform device before registering, which makes it easier to locate the MDIO bus in sysfs when trying to diagnose problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24ftgmac100: Increase reset timeoutBenjamin Herrenschmidt
We had reports of 50us not being sufficient to reset the MAC, thus hitting the "Hardware reset failed" error bringing the interface up on some AST2400 based machines. This bumps the timeout to 200us. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 19:02:37 +0000