summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-07-30mtd: spinand: winbond: Add comment about the maximum frequencyMiquel Raynal
Clarify that Winbond octal capable chips may be clocked at up to 166MHz, which is their absolute maximum. No per-operation maximum value (captured with a "0" in the table) involves that in these cases the maximum frequency of the chip applies, ie. the one commonly described in the DT. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: spinand: winbond: Enable high-speed modes on w35n0xjwMiquel Raynal
w35n0xjw chips can run at up to 166MHz in octal mode, but this is only possible after programming various VCR registers. Implement the new ->configure_chip() hook for this purpose. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: spinand: winbond: Enable high-speed modes on w25n0xjwMiquel Raynal
w25n0xjw chips have a high-speed capability hidden in a configuration register. Once enabled, dual/quad SDR reads may be performed at a much higher frequency. Implement the new ->configure_chip() hook for this purpose and configure the SR4 register accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: spinand: Add a ->configure_chip() hookMiquel Raynal
There is already a manufacturer hook, which is manufacturer specific but not chip specific. We no longer have access to the actual NAND identity at this stage so let's add a per-chip configuration hook to align the chip configuration (if any) with the core's setting. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: spinand: Add a frequency field to all READ_FROM_CACHE variantsMiquel Raynal
These macros had initially no frequency field. When I added the "maximum operation frequency" field, I did it initially on very common macros and I decided to add an optional field for that (with VA_ARGS) in order to prevent massively unreadable changes. I then added new variants in the spinand.h header, and requested a frequency field for them by default. Some times later, I also added maximum frequencies to other existing variants, but I did it incorrectly, without noticing I was wrong because the field was optional. This mix is error prone, so let's do what I should have done since the very beginning: add a frequency field to all READ_FROM_CACHE variants. There is no functional change. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30spi: spi-mem: Take into account the actual maximum frequencyMiquel Raynal
In order to pick the best variant, the duration of each typical operation is derived and then compared. These durations are based on the maximum capabilities of the chips, which are commonly the limiting factors. However there are other possible limiting pieces, such as the hardware layout, EMC considerations and in some cases, the SPI controller itself. We need to take this into account to further refine our variant choice, so let's use the actual frequency that will be used for the operation instead of the theoretical maximum. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Mark Brown <broonie@kernel.org>
2025-07-30spi: spi-mem: Use picoseconds for calculating the op durationsMiquel Raynal
spi_mem_calc_op_duration() is deriving the duration of a specific op, by multiplying the number of cycles with the time a cycle will last. This time was measured in nanoseconds, which means at high frequencies the delta between two frequencies might not be properly catch due to roundings. For instance, the Winbond driver has a changing number of dummy cycles depending on the speed, adding +8 dummy cycles when running at 166MHz compared to 162MHz. Both frequencies would lead to using a 6ns delay per cycle for the op duration computation, whereas in practice there is a small difference which actually offsets the number of extra dummy cycles on a normal page read. Augmenting the precision of the calculation by using picoseconds prevents selecting a lower frequency if we can do slightly better with another frequency involving more cycles. As a result, the above situation leads to comparing cycles of 6024 and 6172 picoseconds which leads to picking the most efficient variant. Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: rawnand: atmel: set pmecc data setup timeBalamanikandan Gunasundar
Setup the pmecc data setup time as 3 clock cycles for 133MHz as recommended by the datasheet. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Reported-by: Zixun LI <admin@hifiphile.com> Closes: https://lore.kernel.org/all/c015bb20-6a57-4f63-8102-34b3d83e0f5b@microchip.com Suggested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com> Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: spinand: propagate spinand_wait() errors from spinand_write_page()Gabor Juhos
Since commit 3d1f08b032dc ("mtd: spinand: Use the external ECC engine logic") the spinand_write_page() function ignores the errors returned by spinand_wait(). Change the code to propagate those up to the stack as it was done before the offending change. Cc: stable@vger.kernel.org Fixes: 3d1f08b032dc ("mtd: spinand: Use the external ECC engine logic") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: rawnand: fsmc: Add missing check after DMA mapThomas Fourier
The DMA map functions can fail and should be tested for errors. Fixes: 4774fb0a48aa ("mtd: nand/fsmc: Add DMA support") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Rule: add Link: https://lore.kernel.org/stable/20250702065806.20983-2-fourier.thomas%40gmail.com Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: rawnand: rockchip: Add missing check after DMA mapThomas Fourier
The DMA map functions can fail and should be tested for errors. Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: rawnand: hynix: don't try read-retry on SLC NANDsHector Palacios
Some SLC NANDs like H27U4G8F2D expose a valid JEDEC ID yet they don't support the read-retry mechanism, and fail. Since SLC NANDs don't require read-retry, continue only if the bits per cell is bigger than 1. Signed-off-by: Hector Palacios <hector.palacios@digi.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: rawnand: atmel: Fix dma_mapping_error() addressThomas Fourier
It seems like what was intended is to test if the dma_map of the previous line failed but the wrong dma address was passed. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Rule: add Link: https://lore.kernel.org/stable/20250702064515.18145-2-fourier.thomas%40gmail.com Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: nand: brcmnand: fix mtd corrected bits statDavid Regan
Currently we attempt to get the amount of flipped bits from a hardware location which is reset on every subpage. Instead obtain total flipped bits stat from hardware accumulator. In addition identify the correct maximum subpage corrected bits. Signed-off-by: David Regan <dregan@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: rawnand: renesas: Add missing check after DMA mapThomas Fourier
The DMA map functions can fail and should be tested for errors. Fixes: d8701fe890ec ("mtd: rawnand: renesas: Add new NAND controller driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: spinand: gigadevice: Add support for GD5F1GM9 chipsTeng Wu
- GD5F1GM9UExxG (ID:c89101 3.3V) - GD5F1GM9RExxG (ID:c88101 1.8V) Both device feature: - 1Gb density (1024 blocks) - 2048-byte page size with 128-byte OOB - 8-bit ECC requirement per 512 bytes - Quad I/O Read support (opcode EBH) - tPROG ≤ 300us typical page program time Testing environment: - Platform: Raspberry PI-5 (Linux raspberry 6.15.0-rc6-v8) - Operations verified: * Full device read/write/erase cycles on all blocks * Nandspeed: ~ GD5F1GM9UE: 2.75MB/s read, 1.99MB/s write, 41.26MB/s erase ~ GD5F1GM9RE: 1.84MB/s read, 1.45MB/s write, 41.04MS/s erase * Nandbiterrs: Both corredted 8-bit errors per 512 bytes * Stresstest: Both 144k cycles 0 bad block growth Full test log: -U: https://gist.github.com/WT-886/b0f41fb50ddac3adc0020222c1f89b61 -R: https://gist.github.com/WT-886/8784e72f4632d519814928ff49225963 Datasheet: -https://github.com/WT-886/DATASHEET/blob/main/GD5F1GM9-v1.0.pdf Signed-off-by: Teng Wu <gigadevice2025@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mtd: nand: brcmnand: replace manual string choices with standard helpersYuesong Li
Use kernel provided standard helper function to replace hard-coded strings Signed-off-by: Yuesong Li <liyuesong@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-07-30mfd: Minor Cirrus/Maxim Kconfig order fixesCharles Keepax
Move some Cirrus parts so they are grouped together alphabetically in menuconfig. Also move the Maxim 5970 out of the middle of the Cirrus parts and put it with the other Maxim parts. No functional changes just alphabetising. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250709133103.3482015-1-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-30mfd: Remove redundant pm_runtime_mark_last_busy() callsSakari Ailus
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(), pm_runtime_autosuspend() and pm_request_autosuspend() now include a call to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to pm_runtime_mark_last_busy(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250704075432.3220321-1-sakari.ailus@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-29Merge tag 'sysctl-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl Pull sysctl updates from Joel Granados: - Move sysctls out of the kern_table array This is the final move of ctl_tables into their respective subsystems. Only 5 (out of the original 50) will remain in kernel/sysctl.c file; these handle either sysctl or common arch variables. By decentralizing sysctl registrations, subsystem maintainers regain control over their sysctl interfaces, improving maintainability and reducing the likelihood of merge conflicts. - docs: Remove false positives from check-sysctl-docs Stopped falsely identifying sysctls as undocumented or unimplemented in the check-sysctl-docs script. This script can now be used to automatically identify if documentation is missing. * tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits) docs: Downgrade arm64 & riscv from titles to comment docs: Replace spaces with tabs in check-sysctl-docs docs: Remove colon from ctltable title in vm.rst docs: Add awk section for ucount sysctl entries docs: Use skiplist when checking sysctl admin-guide docs: nixify check-sysctl-docs sysctl: rename kern_table -> sysctl_subsys_table kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c uevent: mv uevent_helper into kobject_uevent.c sysctl: Removed unused variable sysctl: Nixify sysctl.sh sysctl: Remove superfluous includes from kernel/sysctl.c sysctl: Remove (very) old file changelog sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c sysctl: move cad_pid into kernel/pid.c sysctl: Move tainted ctl_table into kernel/panic.c Input: sysrq: mv sysrq into drivers/tty/sysrq.c fork: mv threads-max into kernel/fork.c parisc/power: Move soft-power into power.c mm: move randomize_va_space into memory.c ...
2025-07-29Merge tag 'hardening-v6.17-rc1-fix1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: "Notably, this contains the fix for for the GCC __init mess I created with the kstack_erase annotations. - staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int(). I was asked to carry this fix, so here it is. :) - fortify: Fix incorrect reporting of read buffer size - kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS - compiler_types: Provide __no_kstack_erase to disable coverage only on Clang" * tag 'hardening-v6.17-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler_types: Provide __no_kstack_erase to disable coverage only on Clang fortify: Fix incorrect reporting of read buffer size kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
2025-07-29Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "A quick summary: perf support for Branch Record Buffer Extensions (BRBE), typical PMU hardware updates, small additions to MTE for store-only tag checking and exposing non-address bits to signal handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on. There is also a TLBI optimisation on hardware that does not require break-before-make when changing the user PTEs between contiguous and non-contiguous. More details: Perf and PMU updates: - Add support for new (v3) Hisilicon SLLC and DDRC PMUs - Add support for Arm-NI PMU integrations that share interrupts between clock domains within a given instance - Allow SPE to be configured with a lower sample period than the minimum recommendation advertised by PMSIDR_EL1.Interval - Add suppport for Arm's "Branch Record Buffer Extension" (BRBE) - Adjust the perf watchdog period according to cpu frequency changes - Minor driver fixes and cleanups Hardware features: - Support for MTE store-only checking (FEAT_MTE_STORE_ONLY) - Support for reporting the non-address bits during a synchronous MTE tag check fault (FEAT_MTE_TAGGED_FAR) - Optimise the TLBI when folding/unfolding contiguous PTEs on hardware with FEAT_BBM (break-before-make) level 2 and no TLB conflict aborts Software features: - Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable() and using the text-poke API for late module relocations - Force VMAP_STACK always on and change arm64_efi_rt_init() to use arch_alloc_vmap_stack() in order to avoid KASAN false positives ACPI: - Improve SPCR handling and messaging on systems lacking an SPCR table Debug: - Simplify the debug exception entry path - Drop redundant DBG_MDSCR_* macros Kselftests: - Cleanups and improvements for SME, SVE and FPSIMD tests Miscellaneous: - Optimise loop to reduce redundant operations in contpte_ptep_get() - Remove ISB when resetting POR_EL0 during signal handling - Mark the kernel as tainted on SEA and SError panic - Remove redundant gcs_free() call" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits) arm64/gcs: task_gcs_el0_enable() should use passed task arm64: Kconfig: Keep selects somewhat alphabetically ordered arm64: signal: Remove ISB when resetting POR_EL0 kselftest/arm64: Handle attempts to disable SM on SME only systems kselftest/arm64: Fix SVE write data generation for SME only systems kselftest/arm64: Test SME on SME only systems in fp-ptrace kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace kselftest/arm64: Allow sve-ptrace to run on SME only systems arm64/mm: Drop redundant addr increment in set_huge_pte_at() kselftest/arm4: Provide local defines for AT_HWCAP3 arm64: Mark kernel as tainted on SAE and SError panic arm64/gcs: Don't call gcs_free() when releasing task_struct drivers/perf: hisi: Support PMUs with no interrupt drivers/perf: hisi: Relax the event number check of v2 PMUs drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver drivers/perf: hisi: Simplify the probe process for each DDRC version perf/arm-ni: Support sharing IRQs within an NI instance perf/arm-ni: Consolidate CPU affinity handling ...
2025-07-29Merge tag 's390-6.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Standardize on the __ASSEMBLER__ macro that is provided by GCC and Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both uapi and non-uapi headers - Explicitly include <linux/export.h> in architecture and driver files which contain an EXPORT_SYMBOL() and remove the include from the files which do not contain the EXPORT_SYMBOL() - Use the full title of "z/Architecture Principles of Operation" manual and the name of a section where facility bits are listed - Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid unnecessary slowing down of the build and confusing external kABI tools that process symtypes data - Print additional unrecoverable machine check information to make the root cause analysis easier - Move cmpxchg_user_key() handling to uaccess library code, since the generated code is large anyway and there is no benefit if it is inlined - Fix a problem when cmpxchg_user_key() is executing a code with a non-default key: if a system is IPL-ed with "LOAD NORMAL", and the previous system used storage keys where the fetch-protection bit was set for some pages, and the cmpxchg_user_key() is located within such page, a protection exception happens - Either the external call or emergency signal order is used to send an IPI to a remote CPU. Use the external order only, since it is at least as good and sometimes even better, than the emergency signal - In case of an early crash the early program check handler prints more or less random value of the last breaking event address, since it is not initialized properly. Copy the last breaking event address from the lowcore to pt_regs to address this - During STP synchronization check udelay() can not be used, since the first CPU modifies tod_clock_base and get_tod_clock_monotonic() might return a non-monotonic time. Instead, busy-loop on other CPUs, while the the first CPU actually handles the synchronization operation - When debugging the early kernel boot using QEMU with the -S flag and GDB attached, skip the decompressor and start directly in kernel - Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture Principles of Operation" manual - Remove the in-kernel time steering support in favour of the new s390 PTP driver, which allows the kernel clock steered more precisely - Remove a possible false-positive warning in pte_free_defer(), which could be triggered in a valid case KVM guest process is initializing * tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits) s390/mm: Remove possible false-positive warning in pte_free_defer() s390/stp: Default to enabled s390/stp: Remove leap second support s390/time: Remove in-kernel time steering s390/sclp: Use monotonic clock in sclp_sync_wait() s390/smp: Use monotonic clock in smp_emergency_stop() s390/time: Use monotonic clock in get_cycles() s390/pai_crypto: Rename PAI Crypto event 4210 scripts/gdb/symbols: make lx-symbols skip the s390 decompressor s390/boot: Introduce jump_to_kernel() function s390/stp: Remove udelay from stp_sync_clock() s390/early: Copy last breaking event address to pt_regs s390/smp: Remove conditional emergency signal order code usage s390/uaccess: Merge cmpxchg_user_key() inline assemblies s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions s390/uaccess: Initialize code pages executed with non-default access key s390/skey: Provide infrastructure for executing with non-default access key s390/uaccess: Make cmpxchg_user_key() library code s390/page: Add memory clobber to page_set_storage_key() s390/page: Cleanup page_set_storage_key() inline assemblies ...
2025-07-29Merge tag 'x86-platform-2025-07-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "This adds support for the AMD hardware feedback interface (HFI), by Perry Yuan" * tag 'x86-platform-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/itmt: Add debugfs file to show core priorities platform/x86/amd: hfi: Add debugfs support platform/x86/amd: hfi: Set ITMT priority from ranking data cpufreq/amd-pstate: Disable preferred cores on designs with workload classification x86/process: Clear hardware feedback history for AMD processors platform/x86: hfi: Add power management callback platform/x86: hfi: Add online and offline callback support platform/x86: hfi: Init per-cpu scores for each class platform/x86: hfi: Parse CPU core ranking data from shared memory platform/x86: hfi: Introduce AMD Hardware Feedback Interface Driver x86/msr-index: Add AMD workload classification MSRs MAINTAINERS: Add maintainer entry for AMD Hardware Feedback Driver Documentation/x86: Add AMD Hardware Feedback Interface documentation
2025-07-29Merge tag 'x86-boot-2025-07-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: - Implement support for embedding EFI SBAT data (Secure Boot Advanced Targeting: a secure boot image revocation facility) on x86 (Vitaly Kuznetsov) - Move the efi_enter_virtual_mode() initialization call from the generic init code to x86 init code (Alexander Shishkin) * tag 'x86-boot-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Implement support for embedding SBAT data for x86 x86/efi: Move runtime service initialization to arch/x86
2025-07-29Merge tag 'locking-core-2025-07-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "Locking primitives: - Mark devm_mutex_init() as __must_check and fix drivers that didn't check the return code (Thomas Weißschuh) - Reorganize <linux/local_lock.h> to better expose the internal APIs to local variables (Sebastian Andrzej Siewior) - Remove OWNER_SPINNABLE in rwsem (Jinliang Zheng) - Remove redundant #ifdefs in the mutex code (Ran Xiaokai) Lockdep: - Avoid returning struct in lock_stats() (Arnd Bergmann) - Change `static const` into enum for LOCKF_*_IRQ_* (Arnd Bergmann) - Temporarily use synchronize_rcu_expedited() in lockdep_unregister_key() to speed things up. (Breno Leitao) Rust runtime: - Add #[must_use] to Lock::try_lock() (Jason Devers)" * tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Speed up lockdep_unregister_key() with expedited RCU synchronization locking/mutex: Remove redundant #ifdefs locking/lockdep: Change 'static const' variables to enum values locking/lockdep: Avoid struct return in lock_stats() locking/rwsem: Use OWNER_NONSPINNABLE directly instead of OWNER_SPINNABLE rust: sync: Add #[must_use] to Lock::try_lock() locking/mutex: Mark devm_mutex_init() as __must_check leds: lp8860: Check return value of devm_mutex_init() spi: spi-nxp-fspi: Check return value of devm_mutex_init() local_lock: Move this_cpu_ptr() notation from internal to main header
2025-07-29Merge tag 'x86_sev_for_v6.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV updates from Borislav Petkov: - Map the SNP calling area pages too so that OVMF EFI fw can issue SVSM calls properly with the goal of implementing EFI variable store in the SVSM - a component which is trusted by the guest, vs in the firmware, which is not - Allow the kernel to handle #VC exceptions from EFI runtime services properly when running as a SNP guest - Rework and cleanup the SNP guest request issue glue code a bit * tag 'x86_sev_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Let sev_es_efi_map_ghcbs() map the CA pages too x86/sev/vc: Fix EFI runtime instruction emulation x86/sev: Drop unnecessary parameter in snp_issue_guest_request() x86/sev: Document requirement for linear mapping of guest request buffers x86/sev: Allocate request in TSC_INFO_REQ on stack virt: sev-guest: Contain snp_guest_request_ioctl in sev-guest
2025-07-29Merge tag 'x86_core_for_v6.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Borislav Petkov: - Add helpers for WB{NO,}INVD with the purpose of using them in KVM and thus diminish the number of invalidations needed. With preceding cleanups, as always * tag 'x86_core_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/lib: Add WBINVD and WBNOINVD helpers to target multiple CPUs x86/lib: Add WBNOINVD helper functions x86/lib: Drop the unused return value from wbinvd_on_all_cpus() drm/gpu: Remove dead checks on wbinvd_on_all_cpus()'s return value
2025-07-29Merge tag 'edac_updates_for_v6.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - i10nm: - switch to using scnprintf() - Add Granite Rapids-D support - synopsys: Make sure ECC error and counter registers are cleared during init/probing to avoid reporting stale errors - igen6: Add Wildcat Lake SoCs support - Make sure scrub features sysfs attributes are initialized properly - Allocate memory repair sysfs attributes statically to reduce stack usage - Fix DIMM module size computation for DIMMs with total capacity which is a non power-of-two number, in amd64_edac - Do not be too dramatic when reporting disabled memory controllers in igen6_edac - Add support to ie31200_edac for the following SoCs: - Core i5-14[67]00 - Bartless Lake-S SoCs - Raptor Lake-HX * tag 'edac_updates_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/{skx_common,i10nm}: Use scnprintf() for safer buffer handling EDAC/synopsys: Clear the ECC counters on init EDAC/ie31200: Add Intel Raptor Lake-HX SoCs support EDAC/igen6: Add Intel Wildcat Lake SoCs support EDAC/i10nm: Add Intel Granite Rapids-D support EDAC/mem_repair: Reduce stack usage in edac_mem_repair_get_desc() EDAC/igen6: Reduce log level to debug for absent memory controllers EDAC/ie31200: Document which CPUs correspond to each Raptor Lake-S device ID EDAC/ie31200: Enable support for Core i5-14600 and i7-14700 ie31200/EDAC: Add Intel Bartlett Lake-S SoCs support
2025-07-30i2c: qcom-geni: fix I2C frequency table to achieve accurate bus ratesKathiravan Thirumoorthy
Update the I2C frequency table to match the recommended values specified in the I2C hardware programming guide. In the current IPQ5424 configuration where 32MHz is the source clock, the I2C bus frequencies do not meet expectations—for instance, 363KHz is achieved instead of the expected 400KHz. Fixes: 506bb2ab0075 ("i2c: qcom-geni: Support systems with 32MHz serial engine clock") Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com> Cc: <stable@vger.kernel.org> # v6.13+ Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250513-i2c-bus-freq-v1-1-9a333ad5757f@oss.qualcomm.com
2025-07-30i2c: tegra: Remove dma_sync_*() callsAkhil R
Calling dma_sync_*() on a buffer from dma_alloc_coherent() is pointless. The driver should not be doing its own bounce-buffering if the buffer is allocated through dma_alloc_coherent(). Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250710131206.2316-4-akhilrajeev@nvidia.com
2025-07-30i2c: tegra: Use internal reset when reset property is not availableAkhil R
For controllers that has an internal software reset, make the reset property optional. This provides and option to use I2C in systems that choose to restrict reset control from Linux or not to implement the ACPI _RST method. Internal reset was not required when the reset control was mandatory. But on platforms where the resets are outside the control of Linux, this had to be implemented by just returning success from BPMP or with an empty _RST method in the ACPI table, basically ignoring the reset. While the internal reset is not identical to the hard reset of the controller, this will reset all the internal state of the controller including FIFOs. This may slightly alter the behaviour in systems which were ignoring the reset but it should not cause any functional difference since all the required I2C registers are configured after this reset, just as in boot. Considering that this sequence is hit during the boot or during the I2C recovery path from an error, the internal reset provides a better alternative than just ignoring the reset. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250710131206.2316-3-akhilrajeev@nvidia.com
2025-07-30i2c: stm32f7: support i2c_*_dma_safe_msg_buf APIsClément Le Goffic
`i2c_*_dma_safe_msg_buf` APIs operate on a `struct i2c_msg`. The get operation make sure the I2C buffer is DMA'able according to its buffer length, or if the memory use is DMA coherent for example and return a valid pointer for safe DMA access to be used. The put operation release the pointer. Prefer using generic API's than relying on private tests. Acked-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-3-84a095a2c728@foss.st.com
2025-07-29Merge branch 'clk-pm' into clk-nextStephen Boyd
* clk-pm: clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls clk: imx: Remove redundant pm_runtime_mark_last_busy() calls Documentation: PM: *_autosuspend() functions update last busy time PM: runtime: Mark last busy stamp in pm_request_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend() PM: runtime: Document return values of suspend-related API functions
2025-07-29Merge branches 'clk-rockchip', 'clk-thead', 'clk-microchip', 'clk-imx' and ↵Stephen Boyd
'clk-qcom' into clk-next * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 132MHz * clk-thead: clk: thead: th1520-ap: Describe mux clocks with clk_mux clk: thead: th1520-ap: Correctly refer the parent of osc_12m clk: thead: Mark essential bus clocks as CLK_IGNORE_UNUSED * clk-microchip: clk: at91: sam9x7: update pll clk ranges * clk-imx: MAINTAINERS: Update i.MX Clock Entry clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR clk: imx95-blk-ctl: Rename lvds and displaymix csr blk clk: imx95-blk-ctl: Fix synchronous abort dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data * clk-qcom: (65 commits) dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom: Remove double colon from description clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos dt-bindings: clock: qcom: document the Milos Video Clock Controller clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos dt-bindings: clock: qcom: document the Milos GPU Clock Controller clk: qcom: Add Display Clock controller (DISPCC) driver for Milos dt-bindings: clock: qcom: document the Milos Display Clock Controller clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos dt-bindings: clock: qcom: document the Milos Camera Clock Controller clk: qcom: Add Global Clock controller (GCC) driver for Milos dt-bindings: clock: qcom: document the Milos Global Clock Controller clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe clk: qcom: gcc-x1e80100: Add missing video resets dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100 clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC ...
2025-07-29Merge branches 'clk-renesas', 'clk-samsung', 'clk-spacemit', 'clk-allwinner' ↵Stephen Boyd
and 'clk-amlogic' into clk-next * clk-renesas: (42 commits) clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs clk: renesas: r9a09g057: Add XSPI clock/reset clk: renesas: r9a09g056: Add XSPI clock/reset clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting clk: renesas: r9a09g057: Add support for xspi mux and divider clk: renesas: r9a09g056: Add support for xspi mux and divider clk: renesas: r9a09g077: Add RIIC module clocks clk: renesas: r9a09g077: Add PLL2 and SDHI clock support clk: renesas: rzv2h: Drop redundant base pointer from pll_clk clk: renesas: r9a09g057: Add entries for the RSPIs dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock clk: renesas: rzv2h: Add missing include file clk: renesas: rzv2h: Use devm_kmemdup_array() clk: renesas: Add CPG/MSSR support to RZ/N2H SoC clk: renesas: r9a09g077: Add PCLKL core clock dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID ... * clk-samsung: clk: samsung: exynosautov920: add block hsi2 clock support dt-bindings: clock: exynosautov920: add hsi2 clock definitions dt-bindings: clock: exynosautov920: sort clock definitions clk: samsung: exynos850: fix a comment clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD * clk-spacemit: clk: spacemit: ccu_pll: fix error return value in recalc_rate callback reset: spacemit: add support for SpacemiT CCU resets clk: spacemit: mark K1 pll1_d8 as critical clk: spacemit: define three reset-only CCUs clk: spacemit: set up reset auxiliary devices soc: spacemit: create a header for clock/reset registers dt-bindings: soc: spacemit: define spacemit,k1-ccu resets * clk-allwinner: clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate() clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll clk: sunxi-ng: v3s: Fix de clock definition clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset * clk-amlogic: clk: amlogic: s4: remove unused data clk: amlogic: drop clk_regmap tables clk: amlogic: get regmap with clk_regmap_init clk: amlogic: remove unnecessary headers clk: amlogic: axg-audio: use the auxiliary reset driver
2025-07-29Merge branches 'clk-bindings', 'clk-cleanup', 'clk-pwm', 'clk-hw-device', ↵Stephen Boyd
'clk-xilinx' and 'clk-adi' into clk-next - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers * clk-bindings: (30 commits) dt-bindings: clock: convert lpc1850-cgu.txt to yaml format dt-bindings: clock: Convert qca,ath79-pll to DT schema dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema dt-bindings: clock: Convert moxa,moxart-clock to DT schema dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema dt-bindings: clock: Convert maxim,max9485 to DT schema dt-bindings: clock: Convert qcom,krait-cc to DT schema dt-bindings: clock: qcom: Remove double colon from description dt-bindings: clock: convert lpc1850-ccu.txt to yaml format dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema dt-bindings: clock: Convert marvell,berlin2-clk to DT schema dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema dt-bindings: clock: Convert lsi,axm5516-clks to DT schema ... * clk-cleanup: (29 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: bcm: bcm2835: convert from round_rate() to determine_rate() MAINTAINERS: Include clk.py under COMMON CLK FRAMEWORK entry clk: ti: Simplify ti_find_clock_provider() ... * clk-pwm: clk: pwm: Make use of non-sleeping PWMs clk: pwm: Don't reconfigure running PWM at probe time clk: pwm: Convert to use pwm_apply_might_sleep() clk: pwm: Let .get_duty_cycle() return the real duty cycle * clk-hw-device: clk: tests: add clk_hw_get_dev() and clk_hw_get_of_node() tests clk: tests: Make clk_register_clk_parent_data_device_driver() common clk: add a clk_hw helpers to get the clock device or device_node * clk-xilinx: clk: xilinx: vcu: Update vcu init/reset sequence clk: xilinx: vcu: unregister pll_post only if registered correctly * clk-adi: clk: clk-axi-clkgen: fix coding style issues clk: clk-axi-clkgen move to min/max() clk: clk-axi-clkgen: detect axi_clkgen_limits at runtime include: adi-axi-common: add new helper macros include: linux: move adi-axi-common.h out of fpga clk: clk-axi-clkgen: make sure to include mod_devicetable.h clk: clk-axi-clkgen: fix fpfd_max frequency for zynq
2025-07-29Merge tag 'timers-cleanups-2025-07-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const
2025-07-29Merge tag 'irq-drivers-2025-07-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt chip driver updates from Thomas Gleixner: - Add support of forced affinity setting to yet offline CPUs for the MIPS-GIC to ensure that the affinity of per CPU interrupts can be set during the early bringup phase of a secondary CPU in the hotplug code before the CPU is set online and interrupts are enabled - Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI interrupt chip - Make the interrupt routing to RISV-V harts specification compliant so it supports arbitrary hart indices - Add a command line parameter and related handling to disable the generic RISCV IMSIC mechanism on platforms which use a trap-emulated IMSIC. Unfortunatly this is required because there is no mechanism available to discover this programatically. - Enable wakeup sources on the Renesas RZV2H driver - Convert interrupt chip drivers, which use a open coded variant of msi_create_parent_irq_domain() to use the new functionality - Convert interrupt chip drivers, which use the old style two level implementation of MSI support over to the MSI parent mechanism to prepare for removing at least one of the three PCI/MSI backend variants. - The usual cleanups and improvements all over the place * tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS() irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() irqchip/riscv-imsic: Add kernel parameter to disable IPIs irqchip/gic-v3: Fix GICD_CTLR register naming irqchip/ls-scfg-msi: Fix NULL dereference in error handling irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain() irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain() irqchip/alpine-msi: Switch to msi_create_parent_irq_domain() irqchip/alpine-msi: Convert to __free irqchip/alpine-msi: Convert to lock guards irqchip/alpine-msi: Clean up whitespace style irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain() irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain() irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain() irqdomain: Add device pointer to irq_domain_info and msi_domain_info irqchip/renesas-rzv2h: Remove unneeded includes irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND irqchip/aslint-sswi: Resolve hart index ...
2025-07-29Merge tag 'irq-msi-2025-07-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI update from Thomas Gleixner: "A trivial cleanup in the PCI/MSI code to remove a duplicated back and forth conversion" * tag 'irq-msi-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Remove duplicated to_pci_dev() conversion
2025-07-29Merge tag 'driver-core-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core Pull driver core updates from Danilo Krummrich: "debugfs: - Remove unneeded debugfs_file_{get,put}() instances - Remove last remnants of debugfs_real_fops() - Allow storing non-const void * in struct debugfs_inode_info::aux sysfs: - Switch back to attribute_group::bin_attrs (treewide) - Switch back to bin_attribute::read()/write() (treewide) - Constify internal references to 'struct bin_attribute' Support cache-ids for device-tree systems: - Add arch hook arch_compact_of_hwid() - Use arch_compact_of_hwid() to compact MPIDR values on arm64 Rust: - Device: - Introduce CoreInternal device context (for bus internal methods) - Provide generic drvdata accessors for bus devices - Provide Driver::unbind() callbacks - Use the infrastructure above for auxiliary, PCI and platform - Implement Device::as_bound() - Rename Device::as_ref() to Device::from_raw() (treewide) - Implement fwnode and device property abstractions - Implement example usage in the Rust platform sample driver - Devres: - Remove the inner reference count (Arc) and use pin-init instead - Replace Devres::new_foreign_owned() with devres::register() - Require T to be Send in Devres<T> - Initialize the data kept inside a Devres last - Provide an accessor for the Devres associated Device - Device ID: - Add support for ACPI device IDs and driver match tables - Split up generic device ID infrastructure - Use generic device ID infrastructure in net::phy - DMA: - Implement the dma::Device trait - Add DMA mask accessors to dma::Device - Implement dma::Device for PCI and platform devices - Use DMA masks from the DMA sample module - I/O: - Implement abstraction for resource regions (struct resource) - Implement resource-based ioremap() abstractions - Provide platform device accessors for I/O (remap) requests - Misc: - Support fallible PinInit types in Revocable - Implement Wrapper<T> for Opaque<T> - Merge pin-init blanket dependencies (for Devres) Misc: - Fix OF node leak in auxiliary_device_create() - Use util macros in device property iterators - Improve kobject sample code - Add device_link_test() for testing device link flags - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits - Hint to prefer container_of_const() over container_of()" * tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits) rust: io: fix broken intra-doc links to `platform::Device` rust: io: fix broken intra-doc link to missing `flags` module rust: io: mem: enable IoRequest doc-tests rust: platform: add resource accessors rust: io: mem: add a generic iomem abstraction rust: io: add resource abstraction rust: samples: dma: set DMA mask rust: platform: implement the `dma::Device` trait rust: pci: implement the `dma::Device` trait rust: dma: add DMA addressing capabilities rust: dma: implement `dma::Device` trait rust: net::phy Change module_phy_driver macro to use module_device_table macro rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id rust: device_id: split out index support into a separate trait device: rust: rename Device::as_ref() to Device::from_raw() arm64: cacheinfo: Provide helper to compress MPIDR value into u32 cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id cacheinfo: Set cache 'id' based on DT data container_of: Document container_of() is not to be used in new code driver core: auxiliary bus: fix OF node leak ...
2025-07-29Merge tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Remove redundant pm_runtime_mark_last_busy() calls MMC host: - Convert drivers to use devm_mmc_alloc_host() - Remove redundant pm_runtime_mark_last_busy() calls - renesas_sdhi: - Add support for the RZ/T2H and RZ/N2H variants - Fix incorrect auto retuning for an SDIO card - rtsx_usb_sdmmc: - Add 74 clocks in poweron flow - Re-work the code in sd_set_power_mode() - loongson2: - Add driver for the Loongson-2K SD/SDIO controller - Add support for the Loongson-2K2000 SD/SDIO/eMMC controller - sdhci: - Drop sdhci_free_host()/sdhci_pltfm_free() interface - Remove the sdhci_free_host() and sdhci_pltfm_free() helpers - sdhci-cadence: Add support for the Mobileye EyeQ controller - sdhci-esdhc-imx: - Optimize clock loopback selection - Don't change pinctrl in suspend if wakeup source - sdhci-msm: - Add support for the Milos variant - Add support for the qcs8300 variant - Ensure SD card power isn't ON when card gets removed - sdhci-of-k1: Disable HW busy detection" * tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (102 commits) mmc: loongson2: Unify the function prefixes for loongson2_mmc_pdata mmc: loongson2: Fix error code in loongson2_mmc_resource_request() dt-bindings: mmc: sdhci-msm: document the Milos SDHCI Controller mmc: loongson2: prevent integer overflow in ret variable mmc: Remove redundant pm_runtime_mark_last_busy() calls mmc: sdhci-msm: Ensure SD card power isn't ON when card removed dt-bindings: mmc: Add sdhci compatible for qcs8300 mmc: sdhci-cadence: use of_property_present mmc: loongson2: Add Loongson-2K2000 SD/SDIO/eMMC controller driver dt-bindings: mmc: loongson,ls2k0500-mmc: Add compatible for Loongson-2K2000 mmc: loongson2: Add Loongson-2K SD/SDIO controller driver dt-bindings: mmc: Add Loongson-2K SD/SDIO/eMMC controller binding mmc: Convert ternary operator to str_true_false() helper dt-bindings: mmc: renesas,sdhi: Document RZ/T2H and RZ/N2H support mmc: sdhci-cadence: add Mobileye eyeQ support dt-bindings: mmc: cdns: add Mobileye EyeQ MMC/SDHCI controller mmc: rtsx_usb_sdmmc: Fix clang -Wimplicit-fallthrough in sd_set_power_mode() mmc: cb710-mmc: Convert ternary operator to str_plural() helper mmc: rtsx_usb_sdmmc: Add 74 clocks in poweron flow mmc: rtsx_usb_sdmmc: Re-work the code in sd_set_power_mode() ...
2025-07-29Merge tag 'pmdomain-v6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Leave powered-on genpds on until ->sync_state() or late_initcall_sync - Export a common ->sync_state() helper for genpd providers - Add generic ->sync_state() support - Add a bus/driver for genpd provider-devices - Introduce dev_pm_genpd_is_on() for consumers pmdomain providers: - cpuidle-psci: Drop redundant ->sync_state() support - cpuidle-riscv-sbi: Drop redundant ->sync_state() support - imx: Set ISI panic write for imx8m-blk-ctrl - qcom: Add support for Glymur and Milos RPMh power-domains - qcom: Use of_genpd_sync_state() for power-domains - rockchip: Add support for the RK3528 variant - samsung: Fix splash-screen handover by enforcing a ->sync_state() - sunxi: Add support for Allwinner A523's PCK600 power-controller - tegra: Opt-out from genpd's common ->sync_state() support for pmc - thead: Instantiate a GPU power sequencer via the auxiliary bus - renesas: Move init to postcore_initcalls - xilinx: Move ->sync_state() support to firmware driver - xilinx: Use of_genpd_sync_state() for power-domains pmdomain consumers: - remoteproc: imx_rproc: Fixup the detect/attach procedure for pre-booted cores" * tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits) pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains dt-bindings: power: rpmpd: Add Glymur power domains remoteproc: imx_rproc: detect and attach to pre-booted remote cores remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU pmdomain: core: introduce dev_pm_genpd_is_on() pmdomain: ti: Select PM_GENERIC_DOMAINS pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller pmdomain: sunxi: sun20i-ppu: add A523 support pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state cpuidle: riscv-sbi: Drop redundant sync_state support cpuidle: psci: Drop redundant sync_state support pmdomain: core: Leave powered-on genpds on until sync_state pmdomain: core: Leave powered-on genpds on until late_initcall_sync pmdomain: core: Default to use of_genpd_sync_state() for genpd providers driver core: Add dev_set_drv_sync_state() pmdomain: core: Add common ->sync_state() support for genpd providers driver core: Export get_dev_from_fwnode() firmware: xilinx: Use of_genpd_sync_state() firmware: xilinx: Don't share zynqmp_pm_init_finalize() ...
2025-07-29Merge tag 'i2c-for-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C Core: - prevent double-free of an fwnode if it is a software node - use recent helpers instead of custom ACPI or outdated OF ones - add a more elaborate description of a message flag Cleanups and refactorings: - lpi2c, riic, st, stm32f7: general improvements - riic: support more flexible IRQ configurations - tegra: fix documentation Improvements: - lpi2c: improve register polling and add atomic transfer - imx: use guarded spinlocks New hardware support: - Samsung Exynos 2200 - Renesas RZ/T2H (R9A09G077), RZ/N2H (R9A09G087) DT binding: - rk3x: enable power domains - nxp: support clock property" * tag 'i2c-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Fix double-free of fwnode in i2c_unregister_device() i2c: lpi2c: implement xfer_atomic callback i2c: lpi2c: use readl_poll_timeout() for register polling dt-bindings: i2c: i2c-rk3x: Allow use of a power-domain dt-bindings: i2c: exynos5: add samsung,exynos2200-hsi2c compatible i2c: lpi2c: convert to use secs_to_jiffies() i2c: st: Use min() to improve code i2c: imx: use guard to take spinlock i2c: stm32f7: Use str_on_off() helper dt-bindings: i2c: nxp,pnx-i2c: allow clocks property i2c: riic: Add support for RZ/T2H SoC i2c: riic: Move generic compatible string to end of array i2c: riic: Pass IRQ desc array as part of OF data dt-bindings: i2c: renesas,riic: Document RZ/T2H and RZ/N2H support dt-bindings: i2c: renesas,riic: Move ref for i2c-controller.yaml to the end i2c: tegra: Add missing kernel-doc for dma_dev member i2c: Clarify behavior of I2C_M_RD flag i2c: mux: pca954x: Use dev_fwnode() i2c: acpi: Replace custom code with device_match_acpi_handle()
2025-07-29Merge tag 'soc-defconfig-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "As usual, more drivers get enabled in the defconfigs, to support newly added hardware drivers. There is one change for Tegra that modifies the Kconfig file at the same time, and the NXP arm32 defconfigs get a refresh" * tag 'soc-defconfig-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) arm: multi_v7_defconfig: Enable TPS65219 regulator arm: omap2plus_defconfig: Enable TPS65219 regulator arm64: defconfig: Enable Tegra241 and Tegra264 riscv: defconfig: spacemit: enable sdhci driver for K1 SoC riscv: defconfig: Enable PWM support for SpacemiT K1 SoC riscv: defconfig: Remove CONFIG_SND_SOC_STARFIVE=m arm64: defconfig: Enable Tegra HSP and BPMP ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503 ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER ARM: imx_v6_v7_defconfig: cleanup with savedefconfig ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm ARM: mxs_defconfig: Cleanup mxs_defconfig arm64: defconfig: enable further Rockchip platform drivers arm64: defconfig: enable Samsung PMIC over ACPM arm64: defconfig: enable Maxim max77759 driver ARM: configs: sama5_defconfig: Select CONFIG_WILC1000_SDIO ARM: shmobile: defconfig: Refresh for v6.16-rc2 arm64: defconfig: Enable RZ/V2H(P) USB2 PHY controller reset driver arm64: defconfig: add S32G RTC module support arm64: defconfig: Drop unneeded unselectable sound drivers ...
2025-07-29Merge tag 'soc-newsoc-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new SoC support from Arnd Bergmann: "These five newly supported chips come with both devicetree descriptions and the changes to wire them up to the build system for easier bisection. The chips in question are: - Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell in the product line that started with the Digital StrongARM SA1100 based PDAs and continued with the Intel PXA2xx that dominated early smartphones. This one only made it only into a few products before the entire product line was cut in 2015. - The QiLai SoC is made by RISC-V core designer Andes Technologies and is in the 'Voyager' reference board in MicroATX form factor. It uses four in-order AX45MP cores, which is the midrange product from Andes. - CIX P1 is one of the few Arm chips designed for small workstations, and this one uses 12 Cortex-A720/A520 cores, making it also one of the only ARMv9.2 machines that one can but at the moment. - Axiado AX3000 is an embedded chip with relative small Cortex-A53 CPU cores described as a "Trusted Control/Compute Unit" that can be used as a BMC in servers. In addition to the usual I/O, this one comes with 10GBit ethernet and and a 4TOPS NPU. - Sophgo SG2000 is an embedded chip that comes with both RISC-V and Arm cores that can run Linux. This was already supported for RISC-V but now it also works on Arm One more chip, the Black Sesame C1200 did not make it in tirm for the merge window" * tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) arm64: defconfig: Enable rudimentary Sophgo SG2000 support arm64: Add SOPHGO SOC family Kconfig support arm64: dts: sophgo: Add Duo Module 01 Evaluation Board arm64: dts: sophgo: Add Duo Module 01 arm64: dts: sophgo: Add initial SG2000 SoC device tree MAINTAINERS: Add entry for Axiado arm64: defconfig: enable the Axiado family arm64: dts: axiado: Add initial support for AX3000 SoC and eval board arm64: add Axiado SoC family dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller dt-bindings: serial: cdns: add Axiado AX3000 UART controller dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant dt-bindings: gpio: cdns: convert to YAML dt-bindings: arm: axiado: add AX3000 EVK compatible strings dt-bindings: vendor-prefixes: Add Axiado Corporation MAINTAINERS: Add CIX SoC maintainer entry arm64: dts: cix: Add sky1 base dts initial support dt-bindings: clock: cix: Add CIX sky1 scmi clock id arm64: defconfig: Enable CIX SoC mailbox: add CIX mailbox driver ...
2025-07-29Merge tag 'soc-drivers-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ...
2025-07-29Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC devicetree updates from Arnd Bergmann: "There are a few new variants of existing chips: - mt6572 is an older mobile phone chip from mediatek that was extremely popular a decade ago but never got upstreamed until now - exynos2200 is a recent high-end mobile phone chip used in a few Samsung phones like the Galaxy S22 - Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M (R8A779H0) and used in automotive applications - Tegra264 is a new chip from NVIDIA, but support is fairly minimal for now, and not much information is public about it There are five more chips in a separate branch, as those are new chip families that I merged along with the necessary infrastructure. New board support is not that exciting, with a total of 33 newly added machines here: - Evaluation platforms for the chips above, plus TI am62d2 and Sophgo sg2042 - Six 32-bit industrial boards based on stm32, imx6 and am33 chips, plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and imx95 - Two newly added ASPEED BMC based motherboards, and one that got removed - Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit msm8976 SoCs - Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1 - A set-top box based on Amlogic meson-gxm Updates for existing machines are spread over all the above families. One notable change here is support for the RP1 I/O chip used in Raspberry Pi 5" * tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits) riscv: dts: sophgo: fix mdio node name for CV180X riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings riscv: dts: sophgo: add ethernet GMAC device for sg2042 riscv: dts: sophgo: Enable ethernet device for Huashan Pi riscv: dts: sophgo: Add mdio multiplexer device for cv18xx riscv: dts: sophgo: Add ethernet device for cv18xx riscv: dts: sophgo: sg2044: add pmu configuration riscv: dts: sophgo: sg2044: add ziccrse extension riscv: dts: sophgo: add zfh for sg2042 riscv: dts: sophgo: add ziccrse for sg2042 riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree riscv: dts: sophgo: sg2044: add PCIe device support for SG2044 riscv: dts: sophgo: sg2044: add MSI device support for SG2044 riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000 riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property ...
2025-07-29Merge tag 'usb-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.17-rc1. Lots of little things in here, mostly all small cleanups and updates, no major new features this development cycle. Stuff included in here is: - xhci minor tweaks for error handling - typec minor updates and a driver update - gadget driver api cleanups - unused function removals - unbind memory leak fixes - a few new device ids added - a few new devices supported for some drivers - other minor cleanups and changes All of these have been in linux-next with no reported issues, with the leak fixes being in the shortest amount of time, but they are 'obviously correct' :)" * tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits) usb: musb: omap2430: clean up probe error handling usb: musb: omap2430: fix device leak at unbind usb: gadget: udc: renesas_usb3: fix device leak at unbind usb: dwc3: meson-g12a: fix device leaks at unbind usb: dwc3: imx8mp: fix device leak at unbind usb: musb: omap2430: enable compile testing usb: gadget: udc: renesas_usb3: drop unused module alias usb: xhci: print xhci->xhc_state when queue_command failed usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init() USB: serial: option: add Foxconn T99W709 usb: core: add urb->sgt parameter description thunderbolt: Fix copy+paste error in match_service_id() usb: typec: ucsi: Update power_supply on power role change usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default usb: typec: fusb302: cache PD RX state usb: typec: ucsi: yoga-c630: add DRM dependency usb: gadget : fix use-after-free in composite_dev_cleanup() usb: chipidea: imx: Add a missing blank line usb: gadget: f_uac1: replace scnprintf() with sysfs_emit() usb: usblp: clean up assignment inside if conditions ...
2025-07-29Merge tag 'tty-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.17-rc1. Included in here is the following types of changes: - another cleanup round from Jiri for the 8250 serial driver and some other tty drivers, things are slowly getting better with our apis thanks to this work. This touched many tty drivers all over the tree. - qcom_geni_serial driver update for new platforms and devices - 8250 quirk handling fixups - dt serial binding updates for different boards/platforms - other minor cleanups and fixes All of these have been in linux-next with no reported issues" * tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain serial: 8250: fix panic due to PSLVERR dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible vt: defkeymap: Map keycodes above 127 to K_HOLE vt: keyboard: Don't process Unicode characters in K_OFF mode serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms serial: qcom-geni: Enable PM runtime for serial driver serial: qcom-geni: move clock-rate logic to separate function serial: qcom-geni: move resource control logic to separate functions serial: qcom-geni: move resource initialization to separate function soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms dt-bindings: qcom: geni-se: describe SA8255p dt-bindings: serial: describe SA8255p serial: 8250_dw: Fix typo "notifer" dt-bindings: serial: 8250: spacemit: set clocks property as required dt-bindings: serial: renesas: Document RZ/V2N SCIF serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build tty: omit need_resched() before cond_resched() serial: 8250_ni: Reorder local variables serial: 8250_ni: Fix build warning ...
generated by cgit (git 2.34.1) at 2025-09-10 18:46:21 +0000