| Age | Commit message (Collapse) | Author |
|---|
|
bch_extent_rebalance
Previously, bch2_bkey_sectors_need_rebalance() called
bch2_target_accepts_data(), checking whether the target is writable.
However, this means that adding or removing devices from a target would
change the value of bch2_bkey_sectors_need_rebalance() for an existing
extent; this needs to be invariant so that the extent trigger can
correctly maintain rebalance_work accounting.
Instead, check target_accepts_data() in io_opts_to_rebalance_opts(),
before creating the bch_extent_rebalance entry.
This fixes (one?) cause of rebalance_work accounting being off.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We unconditionally go read-write, if we're going to do so, before
journal replay: lazy_rw is obsolete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now say explicitly which pointers are being moved or compressed
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since bch2_move_get_io_opts() now synchronizes io_opts with options from
bch_extent_rebalance, delete the ad-hoc logic in rebalance.c that
previously did this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_move_get_io_opts() now synchronizes options loaded from the
filesystem and inode (if present, i.e. not walking the reflink btree
directly) with options from the bch_extent_rebalance_entry, updating the
extent if necessary.
Since bch_extent_rebalance tracks where its option came from we can
preserve "inode options override filesystem options", even for indirect
extents where we don't have access to the inode the options came from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, BCHFS_IOC_REINHERIT_ATTRS didn't trigger rebalance scans
when changing rebalance options - it had been missed, only the xattr
interface triggered them.
Ideally they'd be done by the transactional trigger, but unpacking the
inode to get the options is too heavy to be done in the low level
trigger - the inode trigger is run on every extent update, since the
bch_inode.bi_journal_seq has to be updated for fsync.
bch2_write_inode() is a good compromise, it already unpacks and repacks
and is not run in any super-fast paths.
Additionally, creating the new rebalance entry to trigger the scan is
now done in the same transaction as the inode update that changed the
options.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
They can now be set at mount time
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Centralize some io path option fixups - they weren't always being
applied correctly:
- background_compression uses compression if unset
- background_target uses foreground_target if unset
- nocow disables most fancy io path options
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Using commit_do() to call alloc_sectors_start_trans() breaks when we're
randomly injecting transaction restarts - the restart in the commit
causes us to leak the lock that alloc_sectorS_start_trans() takes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
this was an oversight: rebalance is moving data to a specific device, so
we don't want it falling back to the full filesystem
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're about to add new asserts for btree_trans locking consistency, and
part of that requires that aren't using the btree_trans while it's
unlocked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Combine iter/update/trigger/str_hash flags into a single enum, and
x-macroize them for a to_text() function later.
These flags are all for a specific iter/key/update context, so it makes
sense to group them together - iter/update/trigger flags were already
given distinct bits, this cleans up and unifies that handling.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also print out the data_opts, so that we can see what specifically is
being done to an extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a tracepoint for rebalance, printing out
- the target option
- the compression option
- the key being rebalanced
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BTREE_INSERT flags are actually transaction commit flags - rename them
for clarity.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If copygc does no work - finds no fragmented buckets - wait for a bit of
IO to happen.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new btree, rebalance_work, to eliminate scanning required
for finding extents that need work done on them in the background - i.e.
for the background_target and background_compression options.
rebalance_work is a bitset btree, where a KEY_TYPE_set corresponds to an
extent in the extents or reflink btree at the same pos.
A new extent field is added, bch_extent_rebalance, which indicates that
this extent has work that needs to be done in the background - and which
options to use. This allows per-inode options to be propagated to
indirect extents - at least in some circumstances. In this patch,
changing IO options on a file will not propagate the new options to
indirect extents pointed to by that file.
Updating (setting/clearing) the rebalance_work btree is done by the
extent trigger, which looks at the bch_extent_rebalance field.
Scanning is still requrired after changing IO path options - either just
for a given inode, or for the whole filesystem. We indicate that
scanning is required by adding a KEY_TYPE_cookie key to the
rebalance_work btree: the cookie counter is so that we can detect that
scanning is still required when an option has been flipped mid-way
through an existing scan.
Future possible work:
- Propagate options to indirect extents when being changed
- Add other IO path options - nr_replicas, ec, to rebalance_work so
they can be applied in the background when they change
- Add a counter, for bcachefs fs usage output, showing the pending
amount of rebalance work: we'll probably want to do this after the
disk space accounting rewrite (moving it to a new btree)
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for the new rebalance code - we need a few helpers exported.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More reorganization, this splits up io.c into
- io_read.c
- io_misc.c - fallocate, fpunch, truncate
- io_write.c
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes https://github.com/koverstreet/bcachefs-tools/issues/159
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This allows including a compression level when specifying a compression
type, e.g.
compression=zstd:15
Values from 1 through 15 indicate compression levels, 0 or unspecified
indicates the default.
For LZ4, values 3-15 specify that the HC algorithm should be used.
Note that for compatibility, extents themselves only include the
compression type, not the compression level. This means that specifying
the same compression algorithm but different compression levels for the
compression and background_compression options will have no effect.
XXX: perhaps we could add a warning for this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a bcachefs filesystem is configured with a background device
(disk group), rebalance will relocate data to this device in the
background by checking extent keys for whether they currently reside
in the specified target. For keys that do not, rebalance performs a
read/write cycle to allow the write path to properly relocate data.
If the background target is not usable (read-only, for example),
however, the write path doesn't actually move data to another
device. Instead, rebalance spins indefinitely reading and rewriting
the same data over and over to the same device. If the background
target is made available again, the rebalance picks this up,
relocates the data, and eventually terminates.
To avoid this spinning behavior, update the rebalance background
target logic to not only check whether the extent is not in the
target, but whether the target is actually usable as well. If not,
then don't mark the key for rewrite.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Marking a non-static function as inline doesn't actually work and is
now causing problems - drop that
- Introduce BCACHEFS_LOG_PREFIX for when we want to prefix log messages
with bcachefs (filesystem name)
- Userspace doesn't have real percpu variables (maybe we can get this
fixed someday), put an #ifdef around bch2_disk_reservation_add()
fastpath
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
- add bch2_moving_ctxt_(init|exit)
- split out __bch2_evacutae_bucket() which takes an existing
moving_ctxt, this will be used for improving copygc performance by
pipelining across multiple buckets
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
move_ratelimit() now has a bool that specifies whether we want to
wait for copygc to finish.
When copygc is running, we're probably low on free buckets instead
of consuming the remaining buckets, we want to wait for copygc to
finish.
This should help with performance, and run away bucket fragmentation.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch significantly cleans up and simplifies the data_update
interface. Instead of only being able to specify a single pointer by
device to rewrite, we're now able to specify any or all of the pointers
in the original extent to be rewrited, as a bitmask.
data_cmd is no more: the various pred functions now just return true if
the extent should be moved/updated. All the data_update path does is
rewrite existing replicas, or add new ones.
This fixes a bug where with background compression on replicated
filesystems, where rebalance -> data_update would incorrectly drop the
wrong old replica, and keep trying to recompress an extent pointer and
each time failing to drop the right replica. Oops.
Now, the data update path doesn't look at the io options to decide which
pointers to keep and which to drop - it only goes off of the
data_update_options passed to it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch changes printbufs dynamically allocate and reallocate a
buffer as needed. Stack usage has become a bit of a problem, and a major
cause of that has been static size string buffers on the stack.
The most involved part of this refactoring is that printbufs must now be
exited with printbuf_exit().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds progress stats to sysfs for copygc, rebalance, recovery, and the
cmd_job ioctls.
Signed-off-by: Brett Holman <bholman.devel@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We dropped support for !BTREE_NODE_NEW_EXTENT_OVERWRITE but it turned
out there were people who still had filesystems with btree nodes in that
format in the wild. This adds a new compat feature that indicates we've
scanned for and rewritten nodes in the old format, and does that scan at
mount time if the option isn't set.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new data job type to scan for btree nodes in the old extent
format, and rewrite them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Originally, bcachefs - going back to bcache - stored, for each bucket, a
16 bit counter corresponding to how long it had been since the bucket
was read from. But, this required periodically rescaling counters on
every bucket to avoid wraparound. That wasn't an issue in bcache, where
we'd perodically rewrite the per bucket metadata all at once, but in
bcachefs we're trying to avoid having to walk every single bucket.
This patch switches to persisting 64 bit io clocks, corresponding to the
64 bit bucket timestaps introduced in the previous patch with
KEY_TYPE_alloc_v2.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is to make tracing easier.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
printbufs know how big the buffer is that was allocated, so we can get
rid of the random PAGE_SIZEs all over the place.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This should fix an issue where the rebalance thread was spinning
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes the background_compression option: wihout some way of marking
data as incompressible, rebalance will keep rewriting incompressible
data over and over.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
