Age | Commit message (Collapse) | Author |
|
Stop open coding the log item completions and instead add a callback
into back into the submitter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The dquot and inode version are very similar, which is expected given the
overall b_li_list logic. The differences are that the inode version also
clears the XFS_LI_FLUSHING which is defined in common but only ever set
by the inode item, and that the dquot version takes the ail_lock over
the list iteration. While this seems sensible given that additions and
removals from b_li_list are protected by the ail_lock, log items are
only added before buffer submission, and are only removed when completing
the buffer, so nothing can change the list when retrying a buffer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Since commit acc8f8628c37 ("xfs: attach dquot buffer to dquot log item
buffer") all buf items that use bp->b_li_list are explicitly checked for
in the branch to just clears XFS_LI_FAILED. Remove the dead arm that
calls xfs_clear_li_failed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_submit now only completes a buffer on error, or for in-memory
buftargs. There is no point in using a workqueue for the latter as
the completion will just wake up the caller. Optimize this case by
avoiding the workqueue roundtrip.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Nothing touches the buffer after it has been submitted now, so the need for
the extra transient reference went away as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Invalidating cache lines can be fairly expensive, so don't do it
in interrupt context. Note that in practice very few setup will
actually do anything here as virtually indexed caches are rather
uncommon, but we might as well move the call to the proper place
while touching this area.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The code in _xfs_buf_ioapply is unnecessarily complicated because it
doesn't take advantage of modern bio features.
Simplify it by making use of bio splitting and chaining, that is build
a single bio for the pages in the buffer using a simple loop, and then
split that bio on the map boundaries for discontiguous multi-FSB buffers
and chain the split bios to the main one so that there is only a single
I/O completion.
This not only simplifies the code to build the buffer, but also removes
the need for the b_io_remaining field as buffer ownership is granted
to the bio on submit of the final bio with no chance for a completion
before that as well as the b_io_error field that is now superfluous
because there always is exactly one completion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
No I/O to apply for in-memory buffers, so skip the function call
entirely. Clean up the b_io_error initialization logic to allow
for this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Split the write verification logic out of _xfs_buf_ioapply into a new
xfs_buf_verify_write helper called by xfs_buf_submit given that it isn't
about applying the I/O and doesn't really fit in with the rest of
_xfs_buf_ioapply.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_delwri_submit_buffers has two callers for synchronous and
asynchronous writes that share very little logic. Split out a helper for
the shared per-buffer loop and otherwise open code the submission in the
two callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_delwri_pushbuf synchronously writes a buffer that is on a delwri
list already. Instead of doing a complicated dance with the delwri
and wait list, just leave them alone and open code the actual buffer
write.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
There is no good reason to pass a bool argument to wait for a buffer when
the callers that want that can easily just wait themselves.
This means the wait moves out of the extra hold of the buffer, but as the
callers of synchronous buffer I/O need to hold a reference anyway that is
perfectly fine.
Because all async buffer submitters ignore the error return value, and
the synchronous ones catch the error condition through b_error and
xfs_buf_iowait this also means the new xfs_buf_submit doesn't have to
return an error code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The rbtree root is long gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The comment above xfs_buf_free_maps talks about fields not even used in
the function and also doesn't add any other value. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
__xfs_buf_submit calls xfs_buf_ioend when b_io_remaining hits zero. For
in-memory buftargs b_io_remaining is never incremented from it's initial
value of 1, so this always happens. Thus the extra call to xfs_buf_ioend
in _xfs_buf_ioapply causes a double completion. Fortunately
__xfs_buf_submit is only used for synchronous reads on in-memory buftargs
due to the peculiarities of how they work, so this is mostly harmless and
just causes a little extra work to be done.
Fixes: 5076a6040ca1 ("xfs: support in-memory buffer cache targets")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The source static analysis tool gave the following advice:
./fs/xfs/libxfs/xfs_dir2.c:382:15-22: WARNING opportunity for kmemdup
→ 382 args->value = kmalloc(len,
383 GFP_KERNEL | __GFP_NOLOCKDEP | __GFP_RETRY_MAYFAIL);
384 if (!args->value)
385 return -ENOMEM;
386
→ 387 memcpy(args->value, name, len);
388 args->valuelen = len;
389 return -EEXIST;
Replacing kmalloc() + memcpy() with kmemdump() doesn't change semantics.
Original code works without fault, so this is not a bug fix but proposed improvement.
Link: https://lwn.net/Articles/198928/
Fixes: 94a69db2367ef ("xfs: use __GFP_NOLOCKDEP instead of GFP_NOFS")
Fixes: 384f3ced07efd ("[XFS] Return case-insensitive match for dentry cache")
Fixes: 2451337dd0439 ("xfs: global error sign conversion")
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chandan Babu R <chandanbabu@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
They will eventually be needed to be const for zoned growfs, but even
now having such simpler helpers as const as possible is a good thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Split out helpers for data, rt data and inode related information, and
assigning f_bavail once instead of in three places.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The only non-constant value read under m_sb_lock in xfs_fs_statfs is
sb_dblocks, and it could become stale right after dropping the lock
anyway. Remove the thus pointless lock section.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
pagb_lock has been replaced with eb_lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The b_error check right after xfs_trans_get_buf() is redundant:
1) If the buffer is found in transaction via xfs_trans_buf_item_match(),
any corrupted metadata error would have already been exposed during
previous reads like xfs_da3_node_read().
2) If the buffer is obtained via xfs_buf_get_map():
- It's called without XBF_READ flag, so won't return buffer with
b_error set, since xfs_buf_get_map() will clear it anyway.
- Buffer found in cache normally won't have error since previous reads
had checked it, unless someone corrupts the buffer and the AIL
pushes it out to disk while the buffer's unlocked. But in this case,
AIL will shut down the log.
Remove this redundant check to simplify the code, make the code consistent
with most other xfs_trans_get_buf() callers in XFS.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The current reservation of the log ticket has already been updated a few
lines above in xfs_log_ticket_regrant(), so there is no need to update it
again. This is just a code cleanup with no functional changes.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Use already initialized local variables 'offset' and 'size' instead
of accessing ioend members directly in xfs_setfilesize() call.
This is just a code cleanup with no functional changes.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
When mounting an image containing a log with sb modifications that require
log replay, the mount process hang all the time and stack as follows:
[root@localhost ~]# cat /proc/557/stack
[<0>] xfs_buftarg_wait+0x31/0x70
[<0>] xfs_buftarg_drain+0x54/0x350
[<0>] xfs_mountfs+0x66e/0xe80
[<0>] xfs_fs_fill_super+0x7f1/0xec0
[<0>] get_tree_bdev_flags+0x186/0x280
[<0>] get_tree_bdev+0x18/0x30
[<0>] xfs_fs_get_tree+0x1d/0x30
[<0>] vfs_get_tree+0x2d/0x110
[<0>] path_mount+0xb59/0xfc0
[<0>] do_mount+0x92/0xc0
[<0>] __x64_sys_mount+0xc2/0x160
[<0>] x64_sys_call+0x2de4/0x45c0
[<0>] do_syscall_64+0xa7/0x240
[<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
During log recovery, while updating the in-memory superblock from the
primary SB buffer, if an error is encountered, such as superblock
corruption occurs or some other reasons, we will proceed to out_release
and release the xfs_buf. However, this is insufficient because the
xfs_buf's log item has already been initialized and the xfs_buf is held
by the buffer log item as follows, the xfs_buf will not be released,
causing the mount thread to hang.
xlog_recover_do_primary_sb_buffer
xlog_recover_do_reg_buffer
xlog_recover_validate_buf_type
xfs_buf_item_init(bp, mp)
The solution is straightforward, we simply need to allow it to be
handled by the normal buffer write process. The filesystem will be
shutdown before the submission of buffer_list in xlog_do_recovery_pass(),
ensuring the correct release of the xfs_buf as follows:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
xlog_recover_buf_commit_pass2
error = xlog_recover_do_primary_sb_buffer
//Encounter error and return
if (error)
goto out_writebuf
...
out_writebuf:
xfs_buf_delwri_queue(bp, buffer_list) //add bp to list
return error
...
if (!list_empty(&buffer_list))
if (error)
xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); //shutdown first
xfs_buf_delwri_submit(&buffer_list); //submit buffers in list
__xfs_buf_submit
if (bp->b_mount->m_log && xlog_is_shutdown(bp->b_mount->m_log))
xfs_buf_ioend_fail(bp) //release bp correctly
Fixes: 6a18765b54e2 ("xfs: update the file system geometry after recoverying superblock buffers")
Cc: stable@vger.kernel.org # v6.12
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The t_magic field is only ever assigned to, but never read. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
XFS_ILOG_NONCORE is not used in the kernel code or xfsprogs, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
And return bool instead of a boolean condition as int.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: reflink on the realtime device [v6.2 05/14]
This patchset enables use of the file data block sharing feature (i.e.
reflink) on the realtime device. It follows the same basic sequence as
the realtime rmap series -- first a few cleanups; then introduction of
the new btree format and inode fork format. Next comes enabling CoW and
remapping for the rt device; new scrub, repair, and health reporting
code; and at the end we implement some code to lengthen write requests
so that rt extents are always CoWed fully.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: realtime reverse-mapping support [v6.2 04/14]
This is the latest revision of a patchset that adds to XFS kernel
support for reverse mapping for the realtime device. This time around
I've fixed some of the bitrot that I've noticed over the past few
months, and most notably have converted rtrmapbt to use the metadata
inode directory feature instead of burning more space in the superblock.
At the beginning of the set are patches to implement storing B+tree
leaves in an inode root, since the realtime rmapbt is rooted in an
inode, unlike the regular rmapbt which is rooted in an AG block.
Prior to this, the only btree that could be rooted in the inode fork
was the block mapping btree; if all the extent records fit in the
inode, format would be switched from 'btree' to 'extents'.
The next few patches enhance the reverse mapping routines to handle
the parts that are specific to rtgroups -- adding the new btree type,
adding a new log intent item type, and wiring up the metadata directory
tree entries.
Finally, implement GETFSMAP with the rtrmapbt and scrub functionality
for the rtrmapbt and rtbitmap and online fsck functionality.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: enable in-core block reservation for rt metadata [v6.2 03/14]
In preparation for adding reverse mapping and refcounting to the
realtime device, enhance the metadir code to reserve free space for
btree shape changes as delayed allocation blocks.
This enables us to pre-allocate space for the rmap and refcount btrees
in the same manner as we do for the data device counterparts, which is
how we avoid ENOSPC failures when space is low but we've already
committed to a COW operation.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: refactor btrees to support records in inode root [v6.2 02/14]
Amend the btree code to support storing btree rcords in the inode root,
because the current bmbt code does not support this.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into for-next
xfs: bug fixes for 6.13 [01/14]
Bug fixes for 6.13.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
We have to lock the buffer before we can delete the dquot log item from
the buffer's log item list.
Cc: stable@vger.kernel.org # v6.13-rc3
Fixes: acc8f8628c3737 ("xfs: attach dquot buffer to dquot log item buffer")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
For I/O to reflinked blocks we always need to write an entire new file
system block, and the code enforces the file system block alignment for
the entire file if it has any reflinked blocks. Mirror the larger
value reported in the statx in the dio_offset_align in the xfs-specific
XFS_IOC_DIOINFO ioctl for the same reason.
Don't bother adding a new field for the read alignment to this legacy
ioctl as all new users should use statx instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-6-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For I/O to reflinked blocks we always need to write an entire new
file system block, and the code enforces the file system block alignment
for the entire file if it has any reflinked blocks.
Use the new STATX_DIO_READ_ALIGN flag to report the asymmetric read
vs write alignments for reflinked files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-5-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Split the two bits of optional statx reporting into their own helpers
so that they are self-contained instead of deeply indented in the main
getattr handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-4-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Non-rtg file systems have a fake RT group even if they do not have a RT
device, and thus an rgcount of 1. Ensure xfs_update_last_rtgroup_size
doesn't fail when called for !XFS_RT to handle this case.
Fixes: 87fe4c34a383 ("xfs: create incore realtime group structures")
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Enable reflink for realtime devices, as long as the realtime allocation
unit is a single fsblock.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Port the copy on write fork repair to realtime files.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When we're rebuilding the data fork of a realtime file, we need to
cross-reference each mapping with the rt refcount btree to ensure that
the reflink flag is set if there are any shared extents found.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Plumb knowledge of refcount btrees into the inode core repair code.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Port the data device's refcount btree repair code to the realtime
refcount btree.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Walk the realtime refcount btree to find the CoW staging extents when
we're rebuilding the realtime rmap btree.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When we're rebuilding the data device rmap, if we encounter a "refcount"
format fork, we have to walk the (realtime) refcount btree inode to
build the appropriate mappings.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When we're rebuilding the realtime bitmap, check the proposed free
extents against the rt refcount btree to make sure we don't commit any
grievous errors.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Quota space usage is allowed to exceed the size of the physical storage
when reflink is enabled. Now that we have reflink for the realtime
volume, apply this same logic to the rtb repair logic.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add a new XFS_SCRUB_METAPATH subtype so that we can scrub the metadata
directory tree path to the refcount btree file for each rt group.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If we encounter a directory that has been configured to pass on a CoW
extent size hint to a new realtime file and the hint isn't an integer
multiple of the rt extent size, we should flag the hint for
administrative review and/or turn it off because that is a
misconfiguration.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Update the quota scrubber to allow dquots where the realtime block count
exceeds the block count of the rt volume if reflink is enabled.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If there's a gap between records in the rt refcount btree, we ought to
cross-reference the gap with the rtrmap records to make sure that there
aren't any overlapping records for a region that doesn't have any shared
ownership.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|