| Age | Commit message (Collapse) | Author |
|---|
|
The only reason to pass dentry was because of a pr_notice() text. Move
that to the two callers where it makes sense and add a WARN_ON() to the
third.
file_inode(file) is never NULL on an opened file. Remove check in
cachefiles_unmark_inode_in_use().
Do not open code cachefiles_do_unmark_inode_in_use() in
cachefiles_put_directory().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Separate the error labels from the success path and use 'ret' to store the
error value before jumping to the error label.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Duplicate the few lines that are shared between hugetlbfs_mknod() and
hugetlbfs_tmpfile().
This is a prerequisite for sanely changing the signature of ->tmpfile().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This helper unifies tmpfile creation with opening.
Existing vfs_tmpfile() callers outside of fs/namei.c will be converted to
using this helper. There are two such callers: cachefile and overlayfs.
The cachefiles code currently uses the open_with_fake_path() helper to open
the tmpfile, presumably to disable accounting of the open file. Overlayfs
uses tmpfile for copy_up, which means these struct file instances will be
short lived, hence it doesn't really matter if they are accounted or not.
Disable accounting in this helper too, which should be okay for both
callers.
Add MAY_OPEN permission checking for consistency. Like for create(2)
read/write permissions are not checked.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Currently, uncompressed data is all handled in the shifted way, which
means we have to shift the whole on-disk plain pcluster to get the
logical data. However, since we are also using in-place I/O for
uncompressed data, data copy will be reduced a lot if pcluster is
recorded in the interlaced way as illustrated below:
_______________________________________________________________
| | | |_ tail part |_ head part _|
|<- blk0 ->| .. |<- blkn-2 ->|<- blkn-1 ->|
The logical data then becomes:
________________________________________________________
|_ head part _|_ blk0 _| .. |_ blkn-2 _|_ tail part _|
In addition, non-4k plain pclusters are also survived by the
interlaced way, which can be used for non-4k lclusters as well.
However, it's almost impossible to de-duplicate uncompressed data
in the interlaced way, therefore shifted uncompressed data is still
useful.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/8369112678604fdf4ef796626d59b1fdd0745a53.1663898962.git.huyue2@coolpad.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The implementation of these two functions in fscache mode is almost the
same. Extract the same part as a generic helper to remove the code
duplication.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20220922062414.20437-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
drivers/net/ethernet/freescale/fec.h
7b15515fc1ca ("Revert "fec: Restart PPS after link state change"")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/
drivers/pinctrl/pinctrl-ocelot.c
c297561bc98a ("pinctrl: ocelot: Fix interrupt controller")
181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration")
https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/
tools/testing/selftests/drivers/net/bonding/Makefile
bbb774d921e2 ("net: Add tests for bonding and team address list management")
152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target")
https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/
drivers/net/can/usb/gs_usb.c
5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition")
45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support")
https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch avoids threads live-locking for hours when a large number
threads are competing over the last few free extents as they blocks
getting added and removed from preallocation pools. From our bug
reporter:
A reliable way for triggering this has multiple writers
continuously write() to files when the filesystem is full, while
small amounts of space are freed (e.g. by truncating a large file
-1MiB at a time). In the local filesystem, this can be done by
simply not checking the return code of write (0) and/or the error
(ENOSPACE) that is set. Over NFS with an async mount, even clients
with proper error checking will behave this way since the linux NFS
client implementation will not propagate the server errors [the
write syscalls immediately return success] until the file handle is
closed. This leads to a situation where NFS clients send a
continuous stream of WRITE rpcs which result in ERRNOSPACE -- but
since the client isn't seeing this, the stream of writes continues
at maximum network speed.
When some space does appear, multiple writers will all attempt to
claim it for their current write. For NFS, we may see dozens to
hundreds of threads that do this.
The real-world scenario of this is database backup tooling (in
particular, github.com/mdkent/percona-xtrabackup) which may write
large files (>1TiB) to NFS for safe keeping. Some temporary files
are written, rewound, and read back -- all before closing the file
handle (the temp file is actually unlinked, to trigger automatic
deletion on close/crash.) An application like this operating on an
async NFS mount will not see an error code until TiB have been
written/read.
The lockup was observed when running this database backup on large
filesystems (64 TiB in this case) with a high number of block
groups and no free space. Fragmentation is generally not a factor
in this filesystem (~thousands of large files, mostly contiguous
except for the parts written while the filesystem is at capacity.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
When walking through an inode extents, the ext4_ext_binsearch_idx() function
assumes that the extent header has been previously validated. However, there
are no checks that verify that the number of entries (eh->eh_entries) is
non-zero when depth is > 0. And this will lead to problems because the
EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this:
[ 135.245946] ------------[ cut here ]------------
[ 135.247579] kernel BUG at fs/ext4/extents.c:2258!
[ 135.249045] invalid opcode: 0000 [#1] PREEMPT SMP
[ 135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4
[ 135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0
[ 135.256475] Code:
[ 135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246
[ 135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023
[ 135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c
[ 135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c
[ 135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024
[ 135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000
[ 135.272394] FS: 00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
[ 135.274510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0
[ 135.277952] Call Trace:
[ 135.278635] <TASK>
[ 135.279247] ? preempt_count_add+0x6d/0xa0
[ 135.280358] ? percpu_counter_add_batch+0x55/0xb0
[ 135.281612] ? _raw_read_unlock+0x18/0x30
[ 135.282704] ext4_map_blocks+0x294/0x5a0
[ 135.283745] ? xa_load+0x6f/0xa0
[ 135.284562] ext4_mpage_readpages+0x3d6/0x770
[ 135.285646] read_pages+0x67/0x1d0
[ 135.286492] ? folio_add_lru+0x51/0x80
[ 135.287441] page_cache_ra_unbounded+0x124/0x170
[ 135.288510] filemap_get_pages+0x23d/0x5a0
[ 135.289457] ? path_openat+0xa72/0xdd0
[ 135.290332] filemap_read+0xbf/0x300
[ 135.291158] ? _raw_spin_lock_irqsave+0x17/0x40
[ 135.292192] new_sync_read+0x103/0x170
[ 135.293014] vfs_read+0x15d/0x180
[ 135.293745] ksys_read+0xa1/0xe0
[ 135.294461] do_syscall_64+0x3c/0x80
[ 135.295284] entry_SYSCALL_64_after_hwframe+0x46/0xb0
This patch simply adds an extra check in __ext4_ext_check(), verifying that
eh_entries is not 0 when eh_depth is > 0.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215941
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216283
Cc: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20220822094235.2690-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
request_queues are a block layer implementation detail that should not
leak into file systems. Change the fscrypt inline crypto code to
retrieve block devices instead of request_queues from the file system.
As part of that, clean up the interaction with multi-device file systems
by returning both the number of devices and the actual device array in a
single method call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ebiggers: bug fixes and minor tweaks]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220901193208.138056-4-ebiggers@kernel.org
|
|
Now that the fscrypt_master_key lifetime has been reworked to not be
subject to the quirks of the keyrings subsystem, blk_crypto_evict_key()
no longer gets called after the filesystem has already been unmounted.
Therefore, there is no longer any need to hold extra references to the
filesystem's request_queue(s). (And these references didn't always do
their intended job anyway, as pinning a request_queue doesn't
necessarily pin the corresponding blk_crypto_profile.)
Stop taking these extra references. Instead, just pass the super_block
to fscrypt_destroy_inline_crypt_key(), and use it to get the list of
block devices the key needs to be evicted from.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220901193208.138056-3-ebiggers@kernel.org
|
|
The approach of fs/crypto/ internally managing the fscrypt_master_key
structs as the payloads of "struct key" objects contained in a
"struct key" keyring has outlived its usefulness. The original idea was
to simplify the code by reusing code from the keyrings subsystem.
However, several issues have arisen that can't easily be resolved:
- When a master key struct is destroyed, blk_crypto_evict_key() must be
called on any per-mode keys embedded in it. (This started being the
case when inline encryption support was added.) Yet, the keyrings
subsystem can arbitrarily delay the destruction of keys, even past the
time the filesystem was unmounted. Therefore, currently there is no
easy way to call blk_crypto_evict_key() when a master key is
destroyed. Currently, this is worked around by holding an extra
reference to the filesystem's request_queue(s). But it was overlooked
that the request_queue reference is *not* guaranteed to pin the
corresponding blk_crypto_profile too; for device-mapper devices that
support inline crypto, it doesn't. This can cause a use-after-free.
- When the last inode that was using an incompletely-removed master key
is evicted, the master key removal is completed by removing the key
struct from the keyring. Currently this is done via key_invalidate().
Yet, key_invalidate() takes the key semaphore. This can deadlock when
called from the shrinker, since in fscrypt_ioctl_add_key(), memory is
allocated with GFP_KERNEL under the same semaphore.
- More generally, the fact that the keyrings subsystem can arbitrarily
delay the destruction of keys (via garbage collection delay, or via
random processes getting temporary key references) is undesirable, as
it means we can't strictly guarantee that all secrets are ever wiped.
- Doing the master key lookups via the keyrings subsystem results in the
key_permission LSM hook being called. fscrypt doesn't want this, as
all access control for encrypted files is designed to happen via the
files themselves, like any other files. The workaround which SELinux
users are using is to change their SELinux policy to grant key search
access to all domains. This works, but it is an odd extra step that
shouldn't really have to be done.
The fix for all these issues is to change the implementation to what I
should have done originally: don't use the keyrings subsystem to keep
track of the filesystem's fscrypt_master_key structs. Instead, just
store them in a regular kernel data structure, and rework the reference
counting, locking, and lifetime accordingly. Retain support for
RCU-mode key lookups by using a hash table. Replace fscrypt_sb_free()
with fscrypt_sb_delete(), which releases the keys synchronously and runs
a bit earlier during unmount, so that block devices are still available.
A side effect of this patch is that neither the master keys themselves
nor the filesystem keyrings will be listed in /proc/keys anymore.
("Master key users" and the master key users keyrings will still be
listed.) However, this was mostly an implementation detail, and it was
intended just for debugging purposes. I don't know of anyone using it.
This patch does *not* change how "master key users" (->mk_users) works;
that still uses the keyrings subsystem. That is still needed for key
quotas, and changing that isn't necessary to solve the issues listed
above. If we decide to change that too, it would be a separate patch.
I've marked this as fixing the original commit that added the fscrypt
keyring, but as noted above the most important issue that this patch
fixes wasn't introduced until the addition of inline encryption support.
Fixes: 22d94f493bfb ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220901193208.138056-2-ebiggers@kernel.org
|
|
Using rbtree for sorting groups by average fragment size is relatively
expensive (needs rbtree update on every block freeing or allocation) and
leads to wide spreading of allocations because selection of block group
is very sentitive both to changes in free space and amount of blocks
allocated. Furthermore selecting group with the best matching average
fragment size is not necessary anyway, even more so because the
variability of fragment sizes within a group is likely large so average
is not telling much. We just need a group with large enough average
fragment size so that we have high probability of finding large enough
free extent and we don't want average fragment size to be too big so
that we are likely to find free extent only somewhat larger than what we
need.
So instead of maintaing rbtree of groups sorted by fragment size keep
bins (lists) or groups where average fragment size is in the interval
[2^i, 2^(i+1)). This structure requires less updates on block allocation
/ freeing, generally avoids chaotic spreading of allocations into block
groups, and still is able to quickly (even faster that the rbtree)
provide a block group which is likely to have a suitably sized free
space extent.
This patch reduces number of block groups used when untarring archive
with medium sized files (size somewhat above 64k which is default
mballoc limit for avoiding locality group preallocation) to about half
and thus improves write speeds for eMMC flash significantly.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Curently we don't use any preallocation when a file is already closed
when allocating blocks (from writeback code when converting delayed
allocation). However for small files, using locality group preallocation
is actually desirable as that is not specific to a particular file.
Rather it is a method to pack small files together to reduce
fragmentation and for that the fact the file is closed is actually even
stronger hint the file would benefit from packing. So change the logic
to allow locality group preallocation in this case.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently the Orlov inode allocator searches for free inodes for a
directory only in flex block groups with at most inodes_per_group/16
more directory inodes than average per flex block group. However with
growing size of flex block group this becomes unnecessarily strict.
Scale allowed difference from average directory count per flex block
group with flex block group size as we do with other metrics.
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
mb_set_largest_free_order() updates lists containing groups with largest
chunk of free space of given order. The way it updates it leads to
always moving the group to the tail of the list. Thus allocations
looking for free space of given order effectively end up cycling through
all groups (and due to initialization in last to first order). This
spreads allocations among block groups which reduces performance for
rotating disks or low-end flash media. Change
mb_set_largest_free_order() to only update lists if the order of the
largest free chunk in the group changed.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
One of the side-effects of mb_optimize_scan was that the optimized
functions to select next group to try were called even before we tried
the goal group. As a result we no longer allocate files close to
corresponding inodes as well as we don't try to expand currently
allocated extent in the same group. This results in reaim regression
with workfile.disk workload of upto 8% with many clients on my test
machine:
baseline mb_optimize_scan
Hmean disk-1 2114.16 ( 0.00%) 2099.37 ( -0.70%)
Hmean disk-41 87794.43 ( 0.00%) 83787.47 * -4.56%*
Hmean disk-81 148170.73 ( 0.00%) 135527.05 * -8.53%*
Hmean disk-121 177506.11 ( 0.00%) 166284.93 * -6.32%*
Hmean disk-161 220951.51 ( 0.00%) 207563.39 * -6.06%*
Hmean disk-201 208722.74 ( 0.00%) 203235.59 ( -2.63%)
Hmean disk-241 222051.60 ( 0.00%) 217705.51 ( -1.96%)
Hmean disk-281 252244.17 ( 0.00%) 241132.72 * -4.41%*
Hmean disk-321 255844.84 ( 0.00%) 245412.84 * -4.08%*
Also this is causing huge regression (time increased by a factor of 5 or
so) when untarring archive with lots of small files on some eMMC storage
cards.
Fix the problem by making sure we try goal group first.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/20220727105123.ckwrhbilzrxqpt24@quack3/
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Guard wakeups that the user can trigger, and that may end up triggering a
call back into eventfd_signal. This is in addition to the current approach
that only guards in eventfd_signal.
Rename in_eventfd_signal -> in_eventfd at the same time to reflect this.
Without this there would be a deadlock in the following code using libaio:
int main()
{
struct io_context *ctx = NULL;
struct iocb iocb;
struct iocb *iocbs[] = { &iocb };
int evfd;
uint64_t val = 1;
evfd = eventfd(0, EFD_CLOEXEC);
assert(!io_setup(2, &ctx));
io_prep_poll(&iocb, evfd, POLLIN);
io_set_eventfd(&iocb, evfd);
assert(1 == io_submit(ctx, 1, iocbs));
write(evfd, &val, 8);
}
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220816135959.1490641-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fix from Namjae Jeon:
- fix integer overflow on large partitions
* tag 'exfat-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix overflow for large capacity partition
|
|
The is_posix_acl_xattr() helper was added in 0c5fd887d2bb ("acl: move
idmapped mount fixup into vfs_{g,s}etxattr()") to remove the open-coded
checks for POSIX ACLs. We missed to update two locations. Switch them to
use the helper.
Cc: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Following process:
vfs_setxattr(host)
ubifs_xattr_set
down_write(host_ui->xattr_sem) <- lock first time
create_xattr
ubifs_new_inode(host)
fscrypt_prepare_new_inode(host)
fscrypt_policy_to_inherit(host)
if (IS_ENCRYPTED(inode))
fscrypt_require_key(host)
fscrypt_get_encryption_info(host)
ubifs_xattr_get(host)
down_read(host_ui->xattr_sem) <- AA deadlock
, which may trigger an AA deadlock problem:
[ 102.620871] INFO: task setfattr:1599 blocked for more than 10 seconds.
[ 102.625298] Not tainted 5.19.0-rc7-00001-gb666b6823ce0-dirty #711
[ 102.628732] task:setfattr state:D stack: 0 pid: 1599
[ 102.628749] Call Trace:
[ 102.628753] <TASK>
[ 102.628776] __schedule+0x482/0x1060
[ 102.629964] schedule+0x92/0x1a0
[ 102.629976] rwsem_down_read_slowpath+0x287/0x8c0
[ 102.629996] down_read+0x84/0x170
[ 102.630585] ubifs_xattr_get+0xd1/0x370 [ubifs]
[ 102.630730] ubifs_crypt_get_context+0x1f/0x30 [ubifs]
[ 102.630791] fscrypt_get_encryption_info+0x7d/0x1c0
[ 102.630810] fscrypt_policy_to_inherit+0x56/0xc0
[ 102.630817] fscrypt_prepare_new_inode+0x35/0x160
[ 102.630830] ubifs_new_inode+0xcc/0x4b0 [ubifs]
[ 102.630873] ubifs_xattr_set+0x591/0x9f0 [ubifs]
[ 102.630961] xattr_set+0x8c/0x3e0 [ubifs]
[ 102.631003] __vfs_setxattr+0x71/0xc0
[ 102.631026] vfs_setxattr+0x105/0x270
[ 102.631034] do_setxattr+0x6d/0x110
[ 102.631041] setxattr+0xa0/0xd0
[ 102.631087] __x64_sys_setxattr+0x2f/0x40
Fetch a reproducer in [Link].
Just like ext4 does, which skips encrypting for inode with
EXT4_EA_INODE_FL flag. Stop encypting xattr inode for ubifs.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216260
Fixes: f4e3634a3b64222 ("ubifs: Fix races between xattr_{set|get} ...")
Fixes: d475a507457b5ca ("ubifs: Add skeleton for fscrypto")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The ubifs_compress() function does not compress the data When the
data length is short than 128 bytes or the compressed data length
is not ideal.It cause that the compressed length of the truncated
data in the truncate_data_node() function may be greater than the
length of the raw data read from the flash.
The above two lengths are transferred to the ubifs_encrypt()
function as parameters. This may lead to assertion fails and then
the file system becomes read-only.
This patch use the actual length of the data in the memory as the
input parameter for assert comparison, which avoids the problem.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216213
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
As the 'stats' field in struct mtd_oob_ops is used in conditional
expressions, ensure it is always zero-initialized in all such structures
to prevent random stack garbage from being interpreted as a pointer.
Strictly speaking, this problem currently only needs to be fixed for
struct mtd_oob_ops structures subsequently passed to mtd_read_oob().
However, this commit goes a step further and makes all instances of
struct mtd_oob_ops in the tree zero-initialized, in hope of preventing
future problems, e.g. if struct mtd_req_stats gets extended with write
statistics at some point.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-3-kernel@kempniu.pl
|
|
Fix function name in fs/ubifs/dir.c kernel-doc comment
to remove warning found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
fs/ubifs/dir.c:883: warning: expecting prototype for check_dir_empty().
Prototype was for ubifs_check_dir_empty() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- two fixes for hangs in the umount sequence where threads depend on
each other and the work must be finished in the right order
- in zoned mode, wait for flushing all block group metadata IO before
finishing the zone
* tag 'for-6.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: wait for extent buffer IOs before finishing a zone
btrfs: fix hang during unmount when stopping a space reclaim worker
btrfs: fix hang during unmount when stopping block group reclaim worker
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fix from Christian Brauner:
"Beginning of the merge window we introduced the vfs{g,u}id_t types in
b27c82e12965 ("attr: port attribute changes to new types") and changed
various codepaths over including chown_common().
When userspace passes -1 for an ownership change the ownership fields
in struct iattr stay uninitialized. Usually this is fine because any
code making use of any fields in struct iattr must check the
->ia_valid field whether the value of interest has been initialized.
That's true for all struct iattr passing code.
However, over the course of the last year with more heavy use of KMSAN
we found quite a few places that got this wrong. A recent one I fixed
was 3cb6ee991496 ("9p: only copy valid iattrs in 9P2000.L setattr
implementation").
But we also have LSM hooks. Actually we have two. The first one is
security_inode_setattr() in notify_change() which does the right thing
and passes the full struct iattr down to LSMs and thus LSMs can check
whether it is initialized.
But then we also have security_path_chown() which passes down a path
argument and the target ownership as the filesystem would see it. For
the latter we now generate the target values based on struct iattr and
pass it down. However, when userspace passes -1 then struct iattr
isn't initialized.
This patch simply initializes ->ia_vfs{g,u}id with INVALID_VFS{G,U}ID
so the hook continue to see invalid ownership when -1 is passed from
userspace. The only LSM that cares about the actual values is Tomoyo.
The vfs codepaths don't look at these fields without ->ia_valid being
set so there's no harm in initializing ->ia_vfs{g,u}id. Arguably this
is also safer since we can't end up copying valid ownership values
when invalid ownership values should be passed.
This only affects mainline. No kernel has been released with this and
thus no backport is needed. The commit is thus marked with a Fixes:
tag but annotated with "# mainline only" (I didn't quite remember what
Greg said about how to tell stable autoselect to not bother with fixes
for mainline only)"
* tag 'fs.fixes.v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
open: always initialize ownership fields
|
|
Before this patch, the gfs2 file system was registered prior to creating
the three workqueues. In some cases this allowed dlm to send recovery
work to a workqueue that did not yet exist because gfs2 was still
initializing.
This patch changes the order of gfs2's initialization routine so it only
registers the file system after the work queues are created.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve reverts from Kees Cook:
"The recent work to support time namespace unsharing turns out to have
some undesirable corner cases, so rather than allowing the API to stay
exposed for another release, it'd be best to remove it ASAP, with the
replacement getting another cycle of testing. Nothing is known to use
this yet, so no userspace breakage is expected.
For more details, see:
https://lore.kernel.org/lkml/ed418e43ad28b8688cfea2b7c90fce1c@ispras.ru
Summary:
- Remove the recent 'unshare time namespace on vfork+exec' feature
(Andrei Vagin)"
* tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "fs/exec: allow to unshare a time namespace on vfork+exec"
Revert "selftests/timens: add a test for vfork+exit"
|
|
PSI accounting is now done by the VM code, where it should have been
since the beginning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220915094200.139713-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
erofs uses an additional address space for compressed data read from disk
in addition to the one directly associated with the inode. Reading into
the lower address space is open coded using add_to_page_cache_lru instead
of using the filemap.c helper for page allocation micro-optimizations,
which means it is not covered by the MM PSI annotations for ->read_folio
and ->readahead, so add manual ones instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220915094200.139713-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
btrfs compressed reads try to always read the entire compressed chunk,
even if only a subset is requested. Currently this is covered by the
magic PSI accounting underneath submit_bio, but that is about to go
away. Instead add manual psi_memstall_{enter,leave} annotations.
Note that for readahead this really should be using readahead_expand,
but the additionals reads are also done for plain ->read_folio where
readahead_expand can't work, so this overall logic is left as-is for
now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220915094200.139713-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fuzzers like to scribble over sb_bsize_shift but in reality it's very
unlikely that this field would be corrupted on its own. Nevertheless it
should be checked to avoid the possibility of messy mount errors due to
bad calculations. It's always a fixed value based on the block size so
we can just check that it's the expected value.
Tested with:
mkfs.gfs2 -O -p lock_nolock /dev/vdb
for i in 0 -1 64 65 32 33; do
gfs2_edit -p sb field sb_bsize_shift $i /dev/vdb
mount /dev/vdb /mnt/test && umount /mnt/test
done
Before this patch we get a withdraw after
[ 76.413681] gfs2: fsid=loop0.0: fatal: invalid metadata block
[ 76.413681] bh = 19 (type: exp=5, found=4)
[ 76.413681] function = gfs2_meta_buffer, file = fs/gfs2/meta_io.c, line = 492
and with UBSAN configured we also get complaints like
[ 76.373395] UBSAN: shift-out-of-bounds in fs/gfs2/ops_fstype.c:295:19
[ 76.373815] shift exponent 4294967287 is too large for 64-bit type 'long unsigned int'
After the patch, these complaints don't appear, mount fails immediately
and we get an explanation in dmesg.
Reported-by: syzbot+dcf33a7aae997956fe06@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Beginning of the merge window we introduced the vfs{g,u}id_t types in
b27c82e12965 ("attr: port attribute changes to new types") and changed
various codepaths over including chown_common().
During that change we forgot to account for the case were the passed
ownership value is -1. In this case the ownership fields in struct iattr
aren't initialized but we rely on them being initialized by the time we
generate the ownership to pass down to the LSMs. All the major LSMs
don't care about the ownership values at all. Only Tomoyo uses them and
so it took a while for syzbot to unearth this issue.
Fix this by initializing the ownership fields and do it within the
retry_deleg block. While notify_change() doesn't alter the ownership
fields currently we shouldn't rely on it.
Since no kernel has been released with these changes this does not
needed to be backported to any stable kernels.
[Christian Brauner (Microsoft) <brauner@kernel.org>]
* rewrote commit message
* use INVALID_VFS{G,U}ID macros
Fixes: b27c82e12965 ("attr: port attribute changes to new types") # mainline only
Reported-and-tested-by: syzbot+541e21dcc32c4046cba9@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
A while ago we introduced a dedicated vfs{g,u}id_t type in commit
1e5267cd0895 ("mnt_idmapping: add vfs{g,u}id_t"). We already switched
over a good part of the VFS. Ultimately we will remove all legacy
idmapped mount helpers that operate only on k{g,u}id_t in favor of the
new type safe helpers that operate on vfs{g,u}id_t.
Cc: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
|
|
Introduce 'domain_id' mount option to enable shared domain sementics.
In which case, the related cookie is shared if two mountpoints in the
same domain have the same data blob. Users could specify the name of
domain by this mount option.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918043456.147-7-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Several erofs filesystems can belong to one domain, and data blobs can
be shared among these erofs filesystems of same domain.
Users could specify domain_id mount option to create or join into a
domain.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918110150.6338-1-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Use a pseudo mnt to manage shared cookies.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918043456.147-5-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
A new fscache-based shared domain mode is going to be introduced for
erofs. In which case, same data blobs in same domain will be shared
and reused to reduce on-disk space usage.
The implementation of sharing blobs will be introduced in subsequent
patches.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918043456.147-4-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Some cleanups. No logic changes.
Suggested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918043456.147-3-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Use kill_anon_super() instead of generic_shutdown_super() since the
mount() in erofs fscache mode uses get_tree_nodev() and associated
anon bdev needs to be freed.
Fixes: 9c0cc9c729657 ("erofs: add 'fsid' mount option")
Suggested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918043456.147-2-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
As syzbot reported [1], the root cause is that i_size field is a
signed type, and negative i_size is also less than EROFS_BLKSIZ.
As a consequence, it's handled as fast symlink unexpectedly.
Let's fall back to the generic path to deal with such unusual i_size.
[1] https://lore.kernel.org/r/000000000000ac8efa05e7feaa1f@google.com
Reported-by: syzbot+f966c13b1b4fc0403b19@syzkaller.appspotmail.com
Fixes: 431339ba9042 ("staging: erofs: add inode operations")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20220909023948.28925-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Replace the open coded CONFIG_PREEMPT_RT conditional
preempt_disable/enable() with the new helper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220825164131.402717-3-bigeasy@linutronix.de
|
|
In xfs_attri_log_nameval_alloc(), xlog_kvmalloc() is called
to alloc memory, which will always return
successfully, so we donot need to check return value.
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
A while ago we introduced a dedicated vfs{g,u}id_t type in commit
1e5267cd0895 ("mnt_idmapping: add vfs{g,u}id_t"). We already switched
over a good part of the VFS. Ultimately we will remove all legacy
idmapped mount helpers that operate only on k{g,u}id_t in favor of the
new type safe helpers that operate on vfs{g,u}id_t.
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_setattr_time() has been removed since
commit e014f37db1a2 ("xfs: use setattr_copy to set vfs inode
attributes"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Return the value xfs_dir_cilookup_result() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Add space between arguments would help someone
to locate the key words they want, so break
quoted strings at a space character.
Such as below:
[Before]
kworker/1:0-280 [001] ..... 600.782135: xfs_bunmap:
dev 7:0 ino 0x85 disize 0x0 fileoff 0x0 fsbcount 0x400000001fffffflags ATTRFORK ...
[After]
kworker/1:2-564 [001] ..... 23817.906160: xfs_bunmap:
dev 7:0 ino 0x85 disize 0x0 fileoff 0x0 fsbcount 0x400000001fffff flags ATTRFORK ...
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
"else" is not generally useful after a return,
so remove it for clean code.
There is no logical changes.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
"else" is not generally useful after a return,
so remove them which makes if condition a bit
more clear.
There is no logical changes.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
