summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2020-01-27Merge tag 'hwmon-for-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "core: - Add support for enable attributes to hwmon core - Add intrusion templates pmbus: - Support for Infineon Multi-phase xdpe122 family controllers - Support for Intel IMVP9 and AMD 6.25mV modes - Support for vid mode detection per page bases - Detect if chip is write protected - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320, TPS53688 - Various improvements to ibm-cffps driver k10temp: - Support for additional temperature sensors as well as voltage and current telemetry for Zen CPUs w83627ehf: - Remove support for NCT6775, NCT6776 (they have their own driver) New drivers: - ADM1177 - MAX31730 - Driver for disk and solid state drives with temperature sensors Other: - pwm-fan: stop fan on shutdown" * tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits) hwmon: (k10temp) Display up to eight sets of CCD temperatures hwmon: (k10temp) Add debugfs support hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs hwmon: (k10temp) Report temperatures per CPU die hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info hwmon: (k10temp) Use bitops hwmon: (pwm-fan) stop fan on shutdown MAINTAINERS: add entry for ADM1177 driver dt-binding: hwmon: Add documentation for ADM1177 hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver docs: hwmon: Include 'xdpe12284.rst' into docs hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers hwmon: (pmbus/tps53679) Extend device list supported by driver hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes hwmon: (pmbus/core) Add support for vid mode detection per page bases hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data hwmon: (w83627ehf) Remove set but not used variable 'fan4min' hwmon: Driver for disk and solid state drives with temperature sensors hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off ...
2020-01-27Merge tag 'nand/for-5.6' into mtd/nextMiquel Raynal
Raw NAND * Macronix: Use match_string() helper * Atmel: switch to using devm_fwnode_gpiod_get() * Denali: rework the SKIP_BYTES feature and add reset controlling * Brcmnand: set appropriate DMA mask * Various cleanup. Onenand drivers * Rename Samsung and Omap2 drivers to avoid possible build warnings * Enable compile testing * Various build issues * Kconfig cleanup SPI-NAND * Support for Toshiba TC58CVG2S0HRAIJ
2020-01-27ceph: use copy-from2 op in copy_file_rangeLuis Henriques
Instead of using the copy-from operation, switch copy_file_range to the new copy-from2 operation, which allows to send the truncate_seq and truncate_size parameters. If an OSD does not support the copy-from2 operation it will return -EOPNOTSUPP. In that case, the kernel client will stop trying to do remote object copies for this fs client and will always use the generic VFS copy_file_range. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27ceph: add possible_max_rank and make the code more readableXiubo Li
The m_num_mds here is actually the number for MDSs which are in up:active status, and it will be duplicated to m_num_active_mds, so remove it. Add possible_max_rank to the mdsmap struct and this will be the correctly possible largest rank boundary. Remove the special case for one mds in __mdsmap_get_random_mds(), because the validate mds rank may not always be 0. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27ceph: fix mdsmap cluster available check based on laggy numberXiubo Li
In case the max_mds > 1 in MDS cluster and there is no any standby MDS and all the max_mds MDSs are in up:active state, if one of the up:active MDSs is dead, the m->m_num_laggy in kclient will be 1. Then the mount will fail without considering other healthy MDSs. There manybe some MDSs still "in" the cluster but not in up:active state, we will ignore them. Only when all the up:active MDSs in the cluster are laggy will treat the cluster as not be available. In case decreasing the max_mds, the cluster will not stop the extra up:active MDSs immediately and there will be a latency. During it the up:active MDS number will be larger than the max_mds, so later the m_info memories will 100% be reallocated. Here will pick out the up:active MDSs as the m_num_mds and allocate the needed memories once. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27qed: FW 8.42.2.0 debug featuresMichal Kalderon
Add to debug dump more information on the platform it was collected from (pci func, path id). Provide human readable reg fifo erros. Removed static debug arrays from HSI Functions, and move them to the hwfn. Some structures were slightly changed (removing reserved chip id for example) which lead to many long initializations being modified with one parameter less during initialization. This leads to some long diffs that don't really change anything. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: Debug feature: ilt and mdumpMichal Kalderon
Part of the FW drop includes new debug capabilities implemented in the qed_debug file. This patch dumps additional information during ethtool -d for better debugging. The data dumped is the ilt (internal logical table) and information gathered by the management firmware incase there was a crash and driver was not able to extract the information (mdump). Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 HSI changesMichal Kalderon
This patch contains several HSI changes. The changes are part of features like RDMA VF and OVS, the patch also contains a fix to how the init code determines if the dmae is ready to be used. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 iscsi/fcoe changesMichal Kalderon
- Remove struct iscsi_slow_path_hdr and field fw_cid from several structs - Remove struct iscsi_spe_func_dstry - Remove fields pbe_page_size_log and pbl_page_size_log from struct iscsi_conn_offload_param Signed-off-by: Manish Rangankar <manish.rangankar@marvell.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@marvell.com> Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: Add abstraction for different hsi values per chipMichal Kalderon
The number of BTB blocks was modified to be different between the two chip flavors supported (BB/K2) as a result, this lead to a re-write of selecting the default hsi value based on the chip. This patch creates a lookup table for hsi values per chip rather than ask again and again for every value. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 Additional ll2 typeMichal Kalderon
LL2 queues were a limited resource due to FW constraints. This FW introduced a new resource which is a context based ll2 queue (memory on host). The additional ll2 queues are required for RDMA SRIOV. The code refers to the previous ll2 queues as ram-based or legacy, and the new queues as ctx-based. This change decreased the "legacy" ram-based queues therefore the first ll2 queue used for iWARP was converted to the ctx-based ll2 queue. This feature also exposed a bug in the DIRECT_REG_WR64 macro implementation which didn't have an effect in other use cases. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 Internal ram offsets modificationsMichal Kalderon
IRO stands for internal RAM offsets. Updating the FW binary produces different iro offsets. This file contains the different values, and a new representation of the values. Update the FW version Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-01-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 20 non-merge commits during the last 5 day(s) which contain a total of 24 files changed, 433 insertions(+), 104 deletions(-). The main changes are: 1) Make BPF trampolines and dispatcher aware for the stack unwinder, from Jiri Olsa. 2) Improve handling of failed CO-RE relocations in libbpf, from Andrii Nakryiko. 3) Several fixes to BPF sockmap and reuseport selftests, from Lorenz Bauer. 4) Various cleanups in BPF devmap's XDP flush code, from John Fastabend. 5) Fix BPF flow dissector when used with port ranges, from Yoshiki Komachi. 6) Fix bpffs' map_seq_next callback to always inc position index, from Vasily Averin. 7) Allow overriding LLVM tooling for runqslower utility, from Andrey Ignatov. 8) Silence false-positive lockdep splats in devmap hash lookup, from Amol Grover. 9) Fix fentry/fexit selftests to initialize a variable before use, from John Sperbeck. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27ethtool: provide message mask with DEBUG_GET requestMichal Kubecek
Implement DEBUG_GET request to get debugging settings for a device. At the moment, only message mask corresponding to message level as reported by ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) As part of the implementation, provide symbolic names for message mask bits as ETH_SS_MSG_CLASSES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branch 'pm-devfreq'Rafael J. Wysocki
* pm-devfreq: (24 commits) PM / devfreq: Add debugfs support with devfreq_summary file PM / devfreq: exynos: Rename Exynos to lowercase PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event PM / devfreq: exynos-bus: Disable devfreq-event device when fails PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails PM / devfreq: imx8m-ddrc: Remove unused defines PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource PM / devfreq: rk3399_dmc: Add missing of_node_put() PM / devfreq: rockchip-dfi: Add missing of_node_put() PM / devfreq: Fix multiple kernel-doc warnings PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive() PM / devfreq: exynos-bus: Extract exynos_bus_profile_init() PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq) PM / devfreq: Move statistics to separate struct devfreq_stats PM / devfreq: Add clearing transitions stats PM / devfreq: Change time stats to 64-bit PM / devfreq: Add new name attribute for sysfs ...
2020-01-27Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki
* pm-cpufreq: cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether" cpufreq: s3c: fix unbalances of cpufreq policy refcount cpufreq: imx-cpufreq-dt: Add i.MX8MP support cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading cpufreq: tegra186: convert to devm_platform_ioremap_resource cpufreq: kirkwood: convert to devm_platform_ioremap_resource cpufreq: CPPC: put ACPI table after using it cpufreq : CPPC: Break out if HiSilicon CPPC workaround is matched * pm-sleep: PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior PM: hibernate: fix spelling mistake "shapshot" -> "snapshot" PM: hibernate: Add more logging on hibernation failure PM: hibernate: improve arithmetic division in preallocate_highmem_fraction() PM: wakeup: Show statistics for deleted wakeup sources again PM: sleep: Switch to rtc_time64_to_tm()/rtc_tm_to_time64()
2020-01-27Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: (27 commits) intel_idle: Clean up irtl_2_usec() intel_idle: Move 3 functions closer to their callers intel_idle: Annotate initialization code and data structures intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit() intel_idle: Rearrange intel_idle_cpuidle_driver_init() intel_idle: Clean up NULL pointer check in intel_idle_init() intel_idle: Fold intel_idle_probe() into intel_idle_init() intel_idle: Eliminate __setup_broadcast_timer() cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings cpuidle: sysfs: fix warnings when compiling with W=1 cpuidle: coupled: fix warnings when compiling with W=1 Documentation: admin-guide: PM: Add intel_idle document cpuidle: arm: Enable compile testing for some of drivers cpuidle: Drop unused cpuidle_driver_ref/unref() functions intel_idle: Use ACPI _CST on server systems intel_idle: Add module parameter to prevent ACPI _CST from being used intel_idle: Allow ACPI _CST to be used for selected known processors cpuidle: Allow idle states to be disabled by default intel_idle: Use ACPI _CST for processor models without C-state tables intel_idle: Refactor intel_idle_cpuidle_driver_init() ...
2020-01-27net: remove eth_change_mtuHeiner Kallweit
All usage of this function was removed three years ago, and the function was marked as deprecated: a52ad514fdf3 ("net: deprecate eth_change_mtu, remove usage") So I think we can remove it now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: introduce dev_net notifier register/unregister variantsJiri Pirko
Introduce dev_net variants of netdev notifier register/unregister functions and allow per-net notifier to follow the netdevice into the namespace it is moved to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: Support GRO/GSO fraglist chaining.Steffen Klassert
This patch adds the core functions to chain/unchain GSO skbs at the frag_list pointer. This also adds a new GSO type SKB_GSO_FRAGLIST and a is_flist flag to napi_gro_cb which indicates that this flow will be GROed by fraglist chaining. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: Add a netdev software feature set that defaults to off.Steffen Klassert
The previous patch added the NETIF_F_GRO_FRAGLIST feature. This is a software feature that should default to off. Current software features default to on, so add a new feature set that defaults to off. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: Add fraglist GRO/GSO feature flagsSteffen Klassert
This adds new Fraglist GRO/GSO feature flags. They will be used to configure fraglist GRO/GSO what will be implemented with some followup paches. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27cpufreq: Avoid creating excessively large stack framesRafael J. Wysocki
In the process of modifying a cpufreq policy, the cpufreq core makes a copy of it including all of the internals which is stored on the CPU stack. Because struct cpufreq_policy is relatively large, this may cause the size of the stack frame to exceed the 2 KB limit and so the GCC complains when -Wframe-larger-than= is used. In fact, it is not necessary to copy the entire policy structure in order to modify it, however. First, because cpufreq_set_policy() obtains the min and max policy limits from frequency QoS now, it is not necessary to pass the limits to it from the callers. The only things that need to be passed to it from there are the new governor pointer or (if there is a built-in governor in the driver) the "policy" value representing the governor choice. They both can be passed as individual arguments, though, so make cpufreq_set_policy() take them this way and rework its callers accordingly. This avoids making copies of cpufreq policies in the callers of cpufreq_set_policy(). Second, cpufreq_set_policy() still needs to pass the new policy data to the ->verify() callback of the cpufreq driver whose task is to sanitize the min and max policy limits. It still does not need to make a full copy of struct cpufreq_policy for this purpose, but it needs to pass a few items from it to the driver in case they are needed (different drivers have different needs in that respect and all of them have to be covered). For this reason, introduce struct cpufreq_policy_data to hold copies of the members of struct cpufreq_policy used by the existing ->verify() driver callbacks and pass a pointer to a temporary structure of that type to ->verify() (instead of passing a pointer to full struct cpufreq_policy to it). While at it, notice that intel_pstate and longrun don't really need to verify the "policy" value in struct cpufreq_policy, so drop those check from them to avoid copying "policy" into struct cpufreq_policy_data (which allows it to be slightly smaller). Also while at it fix up white space in a couple of places and make cpufreq_set_policy() static (as it can be so). Fixes: 3000ce3c52f8 ("cpufreq: Use per-policy frequency QoS") Link: https://lore.kernel.org/linux-pm/CAMuHMdX6-jb1W8uC2_237m8ctCpsnGp=JCxqt8pCWVqNXHmkVg@mail.gmail.com Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-01-27thermal/drivers/cpu_cooling: Rename to cpufreq_coolingDaniel Lezcano
As we introduced the idle injection cooling device called cpuidle_cooling, let's be consistent and rename the cpu_cooling to cpufreq_cooling as this one mitigates with OPPs changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191219225317.17158-3-daniel.lezcano@linaro.org
2020-01-27thermal/drivers/cpu_cooling: Introduce the cpu idle cooling driverDaniel Lezcano
The cpu idle cooling device offers a new method to cool down a CPU by injecting idle cycles at runtime. It has some similarities with the intel power clamp driver but it is actually designed to be more generic and relying on the idle injection powercap framework. The idle injection duration is fixed while the running duration is variable. That allows to have control on the device reactivity for the user experience. An idle state powering down the CPU or the cluster will allow to drop the static leakage, thus restoring the heat capacity of the SoC. It can be set with a trip point between the hot and the critical points, giving the opportunity to prevent a hard reset of the system when the cpufreq cooling fails to cool down the CPU. With more sophisticated boards having a per core sensor, the idle cooling device allows to cool down a single core without throttling the compute capacity of several cpus belonging to the same clock line, so it could be used in collaboration with the cpufreq cooling device. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20191219225317.17158-2-daniel.lezcano@linaro.org
2020-01-27thermal/drivers/Kconfig: Convert the CPU cooling device to a choiceDaniel Lezcano
The next changes will add a new way to cool down a CPU by injecting idle cycles. With the current configuration, a CPU cooling device is the cpufreq cooling device. As we want to add a new CPU cooling device, let's convert the CPU cooling to a choice giving a list of CPU cooling devices. At this point, there is obviously only one CPU cooling device. There is no functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20191204153930.9128-1-daniel.lezcano@linaro.org
2020-01-27Merge tag 'usb-serial-5.6-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: Here are the USB-serial updates for 5.6-rc1, including: - a missing ir-usb endpoint sanity check - fixes for two long-standing regressions in ir-usb - opticon chars_in_buffer support Included are also various clean ups. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.6-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check USB: serial: garmin_gps: Use flexible-array member USB: serial: opticon: stop all I/O on close() USB: serial: opticon: add chars_in_buffer() implementation
2020-01-27bitmap: Introduce bitmap_cut(): cut bits and shift remainingStefano Brivio
The new bitmap function bitmap_cut() copies bits from source to destination by removing the region specified by parameters first and cut, and remapping the bits above the cut region by right shifting them. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-26hv_utils: Add the support of hibernationDexuan Cui
Add util_pre_suspend() and util_pre_resume() for some hv_utils devices (e.g. kvp/vss/fcopy), because they need special handling before util_suspend() calls vmbus_close(). For kvp, all the possible pending work items should be cancelled. For vss and fcopy, some extra clean-up needs to be done, i.e. fake a THAW message for hv_vss_daemon and fake a CANCEL_FCOPY message for hv_fcopy_daemon, otherwise when the VM resums back, the daemons can end up in an inconsistent state (i.e. the file systems are frozen but will never be thawed; the file transmitted via fcopy may not be complete). Note: there is an extra patch for the daemons: "Tools: hv: Reopen the devices if read() or write() returns errors", because the hv_utils driver can not guarantee the whole transaction finishes completely once util_suspend() starts to run (at this time, all the userspace processes are frozen). util_probe() disables channel->callback_event to avoid the race with the channel callback. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26Merge tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Unfortunately this weekend we had a few last minute reports, one was for block. The partition disable for zoned devices was overly restrictive, it can work (and be supported) just fine for host-aware variants. Here's a fix ensuring that's the case so we don't break existing users of that" * tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block: block: allow partitions on host aware zone devices
2020-01-26block: allow partitions on host aware zone devicesChristoph Hellwig
Host-aware SMR drives can be used with the commands to explicitly manage zone state, but they can also be used as normal disks. In the former case it makes perfect sense to allow partitions on them, in the latter it does not, just like for host managed devices. Add a check to add_partition to allow partitions on host aware devices, but give up any zone management capabilities in that case, which also catches the previously missed case of adding a partition vs just scanning it. Because sd can rescan the attribute at runtime it needs to check if a disk has partitions, for which a new helper is added to genhd.h. Fixes: 5eac3eb30c9a ("block: Remove partition support for zoned block devices") Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-26tcp: export count for rehash attemptsAbdul Kabbani
Using IPv6 flow-label to swiftly route around avoid congested or disconnected network path can greatly improve TCP reliability. This patch adds SNMP counters and a OPT_STATS counter to track both host-level and connection-level statistics. Network administrators can use these counters to evaluate the impact of this new ability better. Export count for rehash attempts to 1) two SNMP counters: TcpTimeoutRehash (rehash due to timeouts), and TcpDuplicateDataRehash (rehash due to receiving duplicate packets) 2) Timestamping API SOF_TIMESTAMPING_OPT_STATS. Signed-off-by: Abdul Kabbani <akabbani@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Kevin(Yudong) Yang <yyd@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26sched.h: Annotate sighand_struct with __rcuMadhuparna Bhowmik
This patch fixes the following sparse errors by annotating the sighand_struct with __rcu kernel/fork.c:1511:9: error: incompatible types in comparison expression kernel/exit.c:100:19: error: incompatible types in comparison expression kernel/signal.c:1370:27: error: incompatible types in comparison expression This fix introduces the following sparse error in signal.c due to checking the sighand pointer without rcu primitives: kernel/signal.c:1386:21: error: incompatible types in comparison expression This new sparse error is also fixed in this patch. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20200124045908.26389-1-madhuparnabhowmik10@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Off by one in mt76 airtime calculation, from Dan Carpenter. 2) Fix TLV fragment allocation loop condition in iwlwifi, from Luca Coelho. 3) Don't confirm neigh entries when doing ipsec pmtu updates, from Xu Wang. 4) More checks to make sure we only send TSO packets to lan78xx chips that they can actually handle. From James Hughes. 5) Fix ip_tunnel namespace move, from William Dauchy. 6) Fix unintended packet reordering due to cooperation between listification done by GRO and non-GRO paths. From Maxim Mikityanskiy. 7) Add Jakub Kicincki formally as networking co-maintainer. 8) Info leak in airo ioctls, from Michael Ellerman. 9) IFLA_MTU attribute needs validation during rtnl_create_link(), from Eric Dumazet. 10) Use after free during reload in mlxsw, from Ido Schimmel. 11) Dangling pointers are possible in tp->highest_sack, fix from Eric Dumazet. 12) Missing *pos++ in various networking seq_next handlers, from Vasily Averin. 13) CHELSIO_GET_MEM operation neds CAP_NET_ADMIN check, from Michael Ellerman. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (109 commits) firestream: fix memory leaks net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM net: bcmgenet: Use netif_tx_napi_add() for TX NAPI tipc: change maintainer email address net: stmmac: platform: fix probe for ACPI devices net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path net/mlx5e: kTLS, Remove redundant posts in TX resync flow net/mlx5e: kTLS, Fix corner-case checks in TX resync flow net/mlx5e: Clear VF config when switching modes net/mlx5: DR, use non preemptible call to get the current cpu number net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep net/mlx5: DR, Enable counter on non-fwd-dest objects net/mlx5: Update the list of the PCI supported devices net/mlx5: Fix lowest FDB pool size net: Fix skb->csum update in inet_proto_csum_replace16(). netfilter: nf_tables: autoload modules from the abort path netfilter: nf_tables: add __nft_chain_type_get() netfilter: nf_tables_offload: fix check the chain offload flag netfilter: conntrack: sctp: use distinct states for new SCTP connections ipv6_route_seq_next should increase position index ...
2020-01-25Drivers: hv: vmbus: Ignore CHANNELMSG_TL_CONNECT_RESULT(23)Dexuan Cui
When a Linux hv_sock app tries to connect to a Service GUID on which no host app is listening, a recent host (RS3+) sends a CHANNELMSG_TL_CONNECT_RESULT (23) message to Linux and this triggers such a warning: unknown msgtype=23 WARNING: CPU: 2 PID: 0 at drivers/hv/vmbus_drv.c:1031 vmbus_on_msg_dpc Actually Linux can safely ignore the message because the Linux app's connect() will time out in 2 seconds: see VSOCK_DEFAULT_CONNECT_TIMEOUT and vsock_stream_connect(). We don't bother to make use of the message because: 1) it's only supported on recent hosts; 2) a non-trivial effort is required to use the message in Linux, but the benefit is small. So, let's not see the warning by silently ignoring the message. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing netlink attribute sanity check for NFTA_OSF_DREG, from Florian Westphal. 2) Use bitmap infrastructure in ipset to fix KASAN slab-out-of-bounds reads, from Jozsef Kadlecsik. 3) Missing initial CLOSED state in new sctp connection through ctnetlink events, from Jiri Wiesner. 4) Missing check for NFT_CHAIN_HW_OFFLOAD in nf_tables offload indirect block infrastructure, from wenxu. 5) Add __nft_chain_type_get() to sanity check family and chain type. 6) Autoload modules from the nf_tables abort path to fix races reported by syzbot. 7) Remove unnecessary skb->csum update on inet_proto_csum_replace16(), from Praveen Chaudhary. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25IB/mlx5: Return the administrative GUID if existsDanit Goldberg
A user can change the operational GUID (a.k.a affective GUID) through link/infiniband. Therefore it is preferred to return the currently set GUID if it exists instead of the operational. This way the PF can query which VF GUID will be set in the next bind. In order to align with MAC address, zero is returned if administrative GUID is not set. For example, before setting administrative GUID: $ ip link show ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 00:00:00:00:00:00:00:00, PORT_GUID 00:00:00:00:00:00:00:00, link-state auto, trust off, query_rss off Then: $ ip link set ib0 vf 0 node_guid 11:00:af:21:cb:05:11:00 $ ip link set ib0 vf 0 port_guid 22:11:af:21:cb:05:11:00 After setting administrative GUID: $ ip link show ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 11:00:af:21:cb:05:11:00, PORT_GUID 22:11:af:21:cb:05:11:00, link-state auto, trust off, query_rss off Fixes: 9c0015ef0928 ("IB/mlx5: Implement callbacks for getting VFs GUID attributes") Link: https://lore.kernel.org/r/20200116120048.12744-1-leon@kernel.org Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-25linux/random.h: Mark CONFIG_ARCH_RANDOM functions __must_checkRichard Henderson
We must not use the pointer output without validating the success of the random read. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200110145422.49141-7-broonie@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-25linux/random.h: Use false with boolRichard Henderson
Keep the generic fallback versions in sync with the other architecture specific implementations and use the proper name for false. Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200110145422.49141-6-broonie@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-25linux/random.h: Remove arch_has_random, arch_has_random_seedRichard Henderson
The arm64 version of archrandom.h will need to be able to test for support and read the random number without preemption, so a separate query predicate is not practical. Since this part of the generic interface is unused, remove it. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200110145422.49141-5-broonie@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-25bpf: Allow to resolve bpf trampoline and dispatcher in unwindJiri Olsa
When unwinding the stack we need to identify each address to successfully continue. Adding latch tree to keep trampolines for quick lookup during the unwind. The patch uses first 48 bytes for latch tree node, leaving 4048 bytes from the rest of the page for trampoline or dispatcher generated code. It's still enough not to affect trampoline and dispatcher progs maximum counts. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200123161508.915203-3-jolsa@kernel.org
2020-01-25net: sched: Make TBF Qdisc offloadablePetr Machata
Invoke ndo_setup_tc as appropriate to signal init / replacement, destroying and dumping of TBF Qdisc. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Expedited grace-period updates - kfree_rcu() updates - RCU list updates - Preemptible RCU updates - Torture-test updates - Miscellaneous fixes - Documentation updates Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-25jbd2: clean __jbd2_journal_abort_hard() and __journal_abort_soft()zhangyi (F)
__jbd2_journal_abort_hard() is no longer used, so now we can merge __jbd2_journal_abort_hard() and __journal_abort_soft() these two functions into jbd2_journal_abort() and remove them. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191204124614.45424-5-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-24NFS: Add softreval behaviour to nfs_lookup_revalidate()Trond Myklebust
If the server is unavaliable, we want to allow the revalidating lookup to time out, and to default to validating the cached dentry if the 'softreval' mount option is set. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-24PCI: Introduce pci_real_dma_dev()Jon Derrick
The current DMA alias implementation requires the aliased device be on the same PCI bus as the requester ID. Add an arch-specific mechanism to point to another PCI device when doing mapping and PCI DMA alias search. The default case returns the actual device. Link: https://lore.kernel.org/r/1579613871-301529-4-git-send-email-jonathan.derrick@intel.com Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de>
2020-01-24alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=nStephen Boyd
The stubbed version of alarmtimer_get_rtcdev() is not exported. so this won't work if this function is used in a module when CONFIG_RTC_CLASS=n. Move the stub function to the header file and make it inline so that callers don't have to worry about linking against this symbol. rtcdev isn't used outside of this ifdef so it's not required to be redefined to NULL. Drop that while touching this area. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200124055849.154411-4-swboyd@chromium.org
2020-01-24netfilter: nf_tables: autoload modules from the abort pathPablo Neira Ayuso
This patch introduces a list of pending module requests. This new module list is composed of nft_module_request objects that contain the module name and one status field that tells if the module has been already loaded (the 'done' field). In the first pass, from the preparation phase, the netlink command finds that a module is missing on this list. Then, a module request is allocated and added to this list and nft_request_module() returns -EAGAIN. This triggers the abort path with the autoload parameter set on from nfnetlink, request_module() is called and the module request enters the 'done' state. Since the mutex is released when loading modules from the abort phase, the module list is zapped so this is iteration occurs over a local list. Therefore, the request_module() calls happen when object lists are in consistent state (after fulling aborting the transaction) and the commit list is empty. On the second pass, the netlink command will find that it already tried to load the module, so it does not request it again and nft_request_module() returns 0. Then, there is a look up to find the object that the command was missing. If the module was successfully loaded, the command proceeds normally since it finds the missing object in place, otherwise -ENOENT is reported to userspace. This patch also updates nfnetlink to include the reason to enter the abort phase, which is required for this new autoload module rationale. Fixes: ec7470b834fe ("netfilter: nf_tables: store transaction list locally while requesting module") Reported-by: syzbot+29125d208b3dae9a7019@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-24smp: Remove allocation mask from on_each_cpu_cond.*()Sebastian Andrzej Siewior
The allocation mask is no longer used by on_each_cpu_cond() and on_each_cpu_cond_mask() and can be removed. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20200117090137.1205765-4-bigeasy@linutronix.de
generated by cgit (git 2.34.1) at 2025-09-11 13:51:54 +0000