| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Sensor driver fixes
- remove dead TI wl128x FM radio driver
- Add support for the imx462 sensor at the IMX290 binding
- V4L2 pixel data transmitter and receiver documentation improvements
- Add support for MIPI Discovery and Configuration for C-PHY line
orders
- imx8-isi fixes and improvements
- stm32: dcmipp: add core support for the stm32mp25
- qcom: camss: Add sc7280 support
- Various fixes and enhancements
* tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (152 commits)
media: nuvoton: Fix an error check in npcm_video_ece_init()
media: dvb-usb-v2: af9035: fix ISO C90 compilation error on af9035_i2c_master_xfer
media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
media: fix secfeed undefined when filter alloc fail
media: dt-bindings: trivial white-space and example cleanup
MAINTAINERS: repair file entry in MEDIA DRIVERS FOR STM32 - CSI
media: solo6x10: Use const 'struct bin_attribute' callback
media: saa7164: Remove unused values
staging: media: imx: fix OF node leak in imx_media_add_of_subdevs()
media: platform: exynos4-is: Remove unused __is_get_frame_size
media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread
media: mmp: Bring back registration of the device
media: cec: include linux/debugfs.h and linux/seq_file.h where needed
Revert "media: qcom: camss: Restructure camss_link_entities"
media: venus: Remove unused hfi_core_ping()
media: dt-bindings: qcom-venus: Deprecate video-decoder and video-encoder where applicable
media: venus: Populate video encoder/decoder nodename entries
media: venus: Add support for static video encoder/decoder declarations
media: venus: match instance creation and destruction order
media: venus: destroy hfi session after m2m_ctx release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"A very small set of changes this kernel cycle.
Two cleanups, one switches to kmap_local_page() (from kmap_atomic())
and the other removes a bit of dead code"
* tag 'kgdb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Remove unused flags stack
kdb: use kmap_local_page()
|
|
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Introduce a new set of Hyper-V headers in include/hyperv and replace
the old hyperv-tlfs.h with the new headers (Nuno Das Neves)
- Fixes for the Hyper-V VTL mode (Roman Kisel)
- Fixes for cpu mask usage in Hyper-V code (Michael Kelley)
- Document the guest VM hibernation behaviour (Michael Kelley)
- Miscellaneous fixes and cleanups (Jacob Pan, John Starks, Naman Jain)
* tag 'hyperv-next-signed-20250123' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Documentation: hyperv: Add overview of guest VM hibernation
hyperv: Do not overlap the hvcall IO areas in hv_vtl_apicid_to_vp_id()
hyperv: Do not overlap the hvcall IO areas in get_vtl()
hyperv: Enable the hypercall output page for the VTL mode
hv_balloon: Fallback to generic_online_page() for non-HV hot added mem
Drivers: hv: vmbus: Log on missing offers if any
Drivers: hv: vmbus: Wait for boot-time offers during boot and resume
uio_hv_generic: Add a check for HV_NIC for send, receive buffers setup
iommu/hyper-v: Don't assume cpu_possible_mask is dense
Drivers: hv: Don't assume cpu_possible_mask is dense
x86/hyperv: Don't assume cpu_possible_mask is dense
hyperv: Remove the now unused hyperv-tlfs.h files
hyperv: Switch from hyperv-tlfs.h to hyperv/hvhdk.h
hyperv: Add new Hyper-V headers in include/hyperv
hyperv: Clean up unnecessary #includes
hyperv: Move hv_connection_id to hyperv-tlfs.h
|
|
kdb_restore_flags() and kdb_save_flags() were added in 2010 by
commit 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
but have remained unused.
Remove them, and their associated storage.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250112012049.319515-1-linux@treblig.org
Signed-off-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
|
|
Currently, LZ4_DISTANCE_MAX and LZ4_DECOMPRESS_INPLACE_MARGIN are
defined in the erofs subsystem for LZ4 in-place decompression, which is
somewhat unsuitable since they should belong to the LZ4 itself and
may change with future LZ4 codebase updates.
Move them to include/linux/lz4.h to match the upstream LZ4 library [1].
No logic changes.
[1] https://github.com/lz4/lz4/blob/v1.10.0/lib/lz4.h#L670
Link: https://lkml.kernel.org/r/20250114130454.1191150-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Cc; Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The bodies of __signed_type_use() and __unsigned_type_use() are much the
same size as their names - so put the bodies in the only line that expands
them.
Similarly __signed_type() is defined separately for 64bit and then used
exactly once just below.
Change the test for __signed_type from CONFIG_64BIT to one based on gcc
defined macros so that the code is valid if it gets used outside of a
kernel build.
Link: https://lkml.kernel.org/r/9386d1ebb8974fbabbed2635160c3975@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Always pass a 'type' through to __clamp_once(), pass '__auto_type' from
clamp() itself.
The expansion of __types_ok3() is reasonable so it isn't worth the added
complexity of avoiding it when a fixed type is used for all three values.
Link: https://lkml.kernel.org/r/8f69f4deac014f558bab186444bac2e8@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
At some point the definitions for clamp() got added in the middle of the
ones for min() and max(). Re-order the definitions so they are more
sensibly grouped.
Link: https://lkml.kernel.org/r/8bb285818e4846469121c8abc3dfb6e2@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use BUILD_BUG_ON_MSG(statically_true(ulo > uhi), ...) for the sanity check
of the bounds in clamp(). Gives better error coverage and one less
expansion of the arguments.
Link: https://lkml.kernel.org/r/34d53778977747f19cce2abb287bb3e6@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the test for signed values being non-negative only relies on
__builtion_constant_p() (not is_constexpr()) it can use the 'ux' variable
instead of the caller supplied expression. This means that the #define
parameters are only expanded twice. Once in the code and once quoted in
the error message.
Link: https://lkml.kernel.org/r/051afc171806425da991908ed8688a98@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
- Change three to several.
- Remove the comment about retaining constant expressions, no longer true.
- Realign to nearer 80 columns and break on major punctiation.
- Add a leading comment to the block before __signed_type() and __is_nonneg()
Otherwise the block explaining the cast is a bit 'floating'.
Reword the rest of that comment to improve readability.
Link: https://lkml.kernel.org/r/85b050c81c1d4076aeb91a6cded45fee@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "minmax.h: Cleanups and minor optimisations".
Some tidyups and minor changes to minmax.h.
This patch (of 7):
Link: https://lkml.kernel.org/r/c50365d214e04f9ba256d417c8bebbc0@AcuMS.aculab.com
Link: https://lkml.kernel.org/r/f04b2e1310244f62826267346fde0553@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- samsung: add gs101-mbox driver
- microchip: add sbi-ipc driver
- zynqmp: fix invalid __percpu annotation
- qcom: add IPQ5424 APCS compatible
- mpfs fix copy and paste bug
- th1520: Fix NULL vs IS_ERR() and a memory corruption bug
- tegra-hsp: clear mailbox before using message
* tag 'mailbox-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
riscv: export __cpuid_to_hartid_map
riscv: sbi: vendorid_list: Add Microchip Technology to the vendor list
mailbox: th1520: Fix memory corruption due to incorrect array size
mailbox: zynqmp: Remove invalid __percpu annotation in zynqmp_ipi_probe()
MAINTAINERS: add entry for Samsung Exynos mailbox driver
mailbox: add Samsung Exynos driver
dt-bindings: mailbox: add google,gs101-mbox
mailbox: qcom: Add support for IPQ5424 APCS IPC
dt-bindings: mailbox: qcom: Add IPQ5424 APCS compatible
mailbox: qcom-ipcc: Reset CLEAR_ON_RECV_RD if set from boot firmware
mailbox: add Microchip IPC support
dt-bindings: mailbox: add binding for Microchip IPC mailbox controller
mailbox: tegra-hsp: Clear mailbox before using message
mailbox: mpfs: fix copy and paste bug in probe
mailbox: th1520: Fix a NULL vs IS_ERR() bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"The main change is the addition of PCI bus support for mipi-i3c-hci.
I'm also carrying an hwmon patch as it makes use of the bitops
addition that is then mainly used by i3c drivers.
Core:
- Improve initialization of numbered I2C adapters
Drivers:
- use parity8 helper
- dw: fix possible use-after-free
- mipi-i3c-hci: add support for PCI bus host
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Improve initialization of numbered I2C adapters
i3c: master: Fix missing 'ret' assignment in set_speed()
i3c: cdns: use parity8 helper instead of open coding it
i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
i3c: dw: use parity8 helper instead of open coding it
hwmon: (spd5118) Use generic parity calculation
bitops: add generic parity calculation for u8
i3c: mipi-i3c-hci: Add support for MIPI I3C HCI on PCI bus
i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming
i3c: fix kdoc parameter description for module_i3c_i2c_driver()
i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the
efivarfs filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another
OS running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
* tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (23 commits)
x86/efi: skip memattr table on kexec boot
efivarfs: add variable resync after hibernation
efivarfs: abstract initial variable creation routine
efi: libstub: Use '-std=gnu11' to fix build with GCC 15
selftests/efivarfs: add concurrent update tests
selftests/efivarfs: fix tests for failed write removal
efivarfs: fix error on write to new variable leaving remnants
efivarfs: remove unused efivarfs_list
efivarfs: move variable lifetime management into the inodes
selftests/efivarfs: add check for disallowing file truncation
efivarfs: prevent setting of zero size on the inodes in the cache
efi: sysfb_efi: fix W=1 warnings when EFI is not set
efi/libstub: Use __free() helper for pool deallocations
efi/libstub: Use cleanup helpers for freeing copies of the memory map
efi/libstub: Simplify PCI I/O handle buffer traversal
efi/libstub: Refactor and clean up GOP resolution picker code
efi/libstub: Simplify GOP handling code
efi/libstub: Use C99-style for loop to traverse handle buffer
x86/efistub: Drop long obsolete UGA support
efivarfs: make variable_is_present use dcache lookup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Fixes:
- omap: use threaded IRQ for LCD DMA
- omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
- vga16fb: fix orig_video_isVGA confusion
Updates & cleanups:
- hdmi: Remove unused hdmi_infoframe_check
- omapfb:
- Remove unused hdmi5_core_handle_irqs
- Use of_property_present() to test existence of DT property
- Use syscon_regmap_lookup_by_phandle_args
- efifb: Change the return value type to void
- lcdcfb: Use backlight helper
- udlfb: Use const 'struct bin_attribute' callback
- radeon: Use const 'struct bin_attribute' callbacks
- sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()"
* tag 'fbdev-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: lcdcfb: Use backlight helper
fbdev: vga16fb: fix orig_video_isVGA confusion
fbdev: omapfb: Use syscon_regmap_lookup_by_phandle_args
fbdev: omapfb: Use of_property_present() to test existence of DT property
fbdev: sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()
fbdev: omap: use threaded IRQ for LCD DMA
fbdev: omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
fbdev: efifb: Change the return value type to void
fbdev: omapfb: Remove unused hdmi5_core_handle_irqs
video: hdmi: Remove unused hdmi_infoframe_check
fbdev: radeon: Use const 'struct bin_attribute' callbacks
fbdev: udlfb: Use const 'struct bin_attribute' callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
|
|
Some libraries want to ensure they are single threaded before forking,
so making the kernel's kvm huge page recovery process a vhost task of
the user process breaks those. The minijail library used by crosvm is
one such affected application.
Defer the task to after the first VM_RUN call, which occurs after the
parent process has forked all its jailed processes. This needs to happen
only once for the kvm instance, so introduce some general-purpose
infrastructure for that, too. It's similar in concept to pthread_once;
except it is actually usable, because the callback takes a parameter.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250123153543.2769928-1-kbusch@meta.com>
[Move call_once API to include/linux. - Paolo]
Cc: stable@vger.kernel.org
Fixes: d96c77bd4eeb ("KVM: x86: switch hugepage recovery thread to vhost_task")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove physical address skcipher walking
- Fix boot-up self-test race
Algorithms:
- Optimisations for x86/aes-gcm
- Optimisations for x86/aes-xts
- Remove VMAC
- Remove keywrap
Drivers:
- Remove n2
Others:
- Fixes for padata UAF
- Fix potential rhashtable deadlock by moving schedule_work outside
lock"
* tag 'v6.14-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (75 commits)
rhashtable: Fix rhashtable_try_insert test
dt-bindings: crypto: qcom,inline-crypto-engine: Document the SM8750 ICE
dt-bindings: crypto: qcom,prng: Document SM8750 RNG
dt-bindings: crypto: qcom-qce: Document the SM8750 crypto engine
crypto: asymmetric_keys - Remove unused key_being_used_for[]
padata: avoid UAF for reorder_work
padata: fix UAF in padata_reorder
padata: add pd get/put refcnt helper
crypto: skcipher - call cond_resched() directly
crypto: skcipher - optimize initializing skcipher_walk fields
crypto: skcipher - clean up initialization of skcipher_walk::flags
crypto: skcipher - fold skcipher_walk_skcipher() into skcipher_walk_virt()
crypto: skcipher - remove redundant check for SKCIPHER_WALK_SLOW
crypto: skcipher - remove redundant clamping to page size
crypto: skcipher - remove unnecessary page alignment of bounce buffer
crypto: skcipher - document skcipher_walk_done() and rename some vars
crypto: omap - switch from scatter_walk to plain offset
crypto: powerpc/p10-aes-gcm - simplify handling of linear associated data
crypto: bcm - Drop unused setting of local 'ptr' variable
crypto: hisilicon/qm - support new function communication
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for naming idlestates through DT
pmdomain providers:
- arm: Explicitly request the current state at init for the SCMI PM
domain
- mediatek: Add Airoha CPU PM Domain support for CPU frequency
scaling
- ti: Add per-device latency constraint management to the ti_sci PM
domain
cpuidle-psci:
- Enable system-wakeup through GENPD_FLAG_ACTIVE_WAKEUP"
* tag 'pmdomain-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: airoha: Fix compilation error with Clang-20 and Thumb2 mode
pmdomain: arm: scmi_pm_domain: Send an explicit request to set the current state
pmdomain: airoha: Add Airoha CPU PM Domain support
pmdomain: ti_sci: handle wake IRQs for IO daisy chain wakeups
pmdomain: ti_sci: add wakeup constraint management
pmdomain: ti_sci: add per-device latency constraint management
pmdomain: imx-gpcv2: Suppress bind attrs
pmdomain: imx8m[p]-blk-ctrl: Suppress bind attrs
pmdomain: core: Support naming idle states
dt-bindings: power: domain-idle-state: Allow idle-state-name
cpuidle: psci: Activate GENPD_FLAG_ACTIVE_WAKEUP with OSI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- PASID support for the blocked_domain
ARM-SMMU Updates:
- SMMUv2:
- Implement per-client prefetcher configuration on Qualcomm SoCs
- Support for the Adreno SMMU on Qualcomm's SDM670 SOC
- SMMUv3:
- Pretty-printing of event records
- Drop the ->domain_alloc_paging implementation in favour of
domain_alloc_paging_flags(flags==0)
- IO-PGTable:
- Generalisation of the page-table walker to enable external
walkers (e.g. for debugging unexpected page-faults from the GPU)
- Minor fix for handling concatenated PGDs at stage-2 with 16KiB
pages
- Misc:
- Clean-up device probing and replace the crufty probe-deferral
hack with a more robust implementation of
arm_smmu_get_by_fwnode()
- Device-tree binding updates for a bunch of Qualcomm platforms
Intel VT-d Updates:
- Remove domain_alloc_paging()
- Remove capability audit code
- Draining PRQ in sva unbind path when FPD bit set
- Link cache tags of same iommu unit together
AMD-Vi Updates:
- Use CMPXCHG128 to update DTE
- Cleanups of the domain_alloc_paging() path
RiscV IOMMU:
- Platform MSI support
- Shutdown support
Rockchip IOMMU:
- Add DT bindings for Rockchip RK3576
More smaller fixes and cleanups"
* tag 'iommu-updates-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits)
iommu: Use str_enable_disable-like helpers
iommu/amd: Fully decode all combinations of alloc_paging_flags
iommu/amd: Move the nid to pdom_setup_pgtable()
iommu/amd: Change amd_iommu_pgtable to use enum protection_domain_mode
iommu/amd: Remove type argument from do_iommu_domain_alloc() and related
iommu/amd: Remove dev == NULL checks
iommu/amd: Remove domain_alloc()
iommu/amd: Remove unused amd_iommu_domain_update()
iommu/riscv: Fixup compile warning
iommu/arm-smmu-v3: Add missing #include of linux/string_choices.h
iommu/arm-smmu-v3: Use str_read_write helper w/ logs
iommu/io-pgtable-arm: Add way to debug pgtable walk
iommu/io-pgtable-arm: Re-use the pgtable walk for iova_to_phys
iommu/io-pgtable-arm: Make pgtable walker more generic
iommu/arm-smmu: Add ACTLR data and support for qcom_smmu_500
iommu/arm-smmu: Introduce ACTLR custom prefetcher settings
iommu/arm-smmu: Add support for PRR bit setup
iommu/arm-smmu: Refactor qcom_smmu structure to include single pointer
iommu/arm-smmu: Re-enable context caching in smmu reset operation
iommu/vt-d: Link cache tags of same iommu unit together
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fgraph updates from Steven Rostedt:
"Remove calltime and rettime from fgraph infrastructure
The calltime and rettime were used by the function graph tracer to
calculate the timings of functions where it traced their entry and
exit. The calltime and rettime were stored in the generic structures
that were used for the mechanisms to add an entry and exit callback.
Now that function graph infrastructure is used by other subsystems
than just the tracer, the calltime and rettime are not needed for
them. Remove the calltime and rettime from the generic fgraph
infrastructure and have the callers that require them handle them"
* tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Remove calltime and rettime from generic operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros to
cleanup code and remove all gotos from kprobes code.
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time to only when getting the module
refcount in check_kprobe_access_safe().
Previously it disabled preempt needlessly for other checks including
jump_label_text_reserved(), which took a long time because of the
linear search.
* tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
tracing: Use __free() for kprobe events to cleanup
tracing: Use __free() in trace_probe for cleanup
kprobes: Remove remaining gotos
kprobes: Remove unneeded goto
kprobes: Use guard for rcu_read_lock
kprobes: Use guard() for external locks
jump_label: Define guard() for jump_label_lock
tracing/eprobe: Adopt guard() and scoped_guard()
tracing/uprobe: Adopt guard() and scoped_guard()
tracing/kprobe: Adopt guard() and scoped_guard()
kprobes: Adopt guard() and scoped_guard()
kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify pre-content notification support from Jan Kara:
"This introduces a new fsnotify event (FS_PRE_ACCESS) that gets
generated before a file contents is accessed.
The event is synchronous so if there is listener for this event, the
kernel waits for reply. On success the execution continues as usual,
on failure we propagate the error to userspace. This allows userspace
to fill in file content on demand from slow storage. The context in
which the events are generated has been picked so that we don't hold
any locks and thus there's no risk of a deadlock for the userspace
handler.
The new pre-content event is available only for users with global
CAP_SYS_ADMIN capability (similarly to other parts of fanotify
functionality) and it is an administrator responsibility to make sure
the userspace event handler doesn't do stupid stuff that can DoS the
system.
Based on your feedback from the last submission, fsnotify code has
been improved and now file->f_mode encodes whether pre-content event
needs to be generated for the file so the fast path when nobody wants
pre-content event for the file just grows the additional file->f_mode
check. As a bonus this also removes the checks whether the old
FS_ACCESS event needs to be generated from the fast path. Also the
place where the event is generated during page fault has been moved so
now filemap_fault() generates the event if and only if there is no
uptodate folio in the page cache.
Also we have dropped FS_PRE_MODIFY event as current real-world users
of the pre-content functionality don't really use it so let's start
with the minimal useful feature set"
* tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
fanotify: Fix crash in fanotify_init(2)
fs: don't block write during exec on pre-content watched files
fs: enable pre-content events on supported file systems
ext4: add pre-content fsnotify hook for DAX faults
btrfs: disable defrag on pre-content watched files
xfs: add pre-content fsnotify hook for DAX faults
fsnotify: generate pre-content permission event on page fault
mm: don't allow huge faults for files with pre content watches
fanotify: disable readahead if we have pre-content watches
fanotify: allow to set errno in FAN_DENY permission response
fanotify: report file range info with pre-content events
fanotify: introduce FAN_PRE_ACCESS permission event
fsnotify: generate pre-content permission event on truncate
fsnotify: pass optional file access range in pre-content event
fsnotify: introduce pre-content permission events
fanotify: reserve event bit of deprecated FAN_DIR_MODIFY
fanotify: rename a misnamed constant
fanotify: don't skip extra event info if no info_mode is set
fsnotify: check if file is actually being watched for pre-content events on open
fsnotify: opt-in for permission events at file open time
...
|
|
Revert commit 41a337b40e98 ("Add EXPORT macros for exporting PM
functions") because the macros added by it are still unused almost
two years after they had been introduced.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250116154354.149297-1-andriy.shevchenko@linux.intel.com
[ rjw: New changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If one of the waveform functions is called for a chip that only supports
.apply(), we want that an error code is returned and not a NULL pointer
exception.
Fixes: 6c5126c6406d ("pwm: Provide new consumer API functions for waveforms")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20250123172709.391349-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
hrtimers are migrated away from the dying CPU to any online target at
the CPUHP_AP_HRTIMERS_DYING stage in order not to delay bandwidth timers
handling tasks involved in the CPU hotplug forward progress.
However wakeups can still be performed by the outgoing CPU after
CPUHP_AP_HRTIMERS_DYING. Those can result again in bandwidth timers being
armed. Depending on several considerations (crystal ball power management
based election, earliest timer already enqueued, timer migration enabled or
not), the target may eventually be the current CPU even if offline. If that
happens, the timer is eventually ignored.
The most notable example is RCU which had to deal with each and every of
those wake-ups by deferring them to an online CPU, along with related
workarounds:
_ e787644caf76 (rcu: Defer RCU kthreads wakeup when CPU is dying)
_ 9139f93209d1 (rcu/nocb: Fix RT throttling hrtimer armed from offline CPU)
_ f7345ccc62a4 (rcu/nocb: Fix rcuog wake-up from offline softirq)
The problem isn't confined to RCU though as the stop machine kthread
(which runs CPUHP_AP_HRTIMERS_DYING) reports its completion at the end
of its work through cpu_stop_signal_done() and performs a wake up that
eventually arms the deadline server timer:
WARNING: CPU: 94 PID: 588 at kernel/time/hrtimer.c:1086 hrtimer_start_range_ns+0x289/0x2d0
CPU: 94 UID: 0 PID: 588 Comm: migration/94 Not tainted
Stopper: multi_cpu_stop+0x0/0x120 <- stop_machine_cpuslocked+0x66/0xc0
RIP: 0010:hrtimer_start_range_ns+0x289/0x2d0
Call Trace:
<TASK>
start_dl_timer
enqueue_dl_entity
dl_server_start
enqueue_task_fair
enqueue_task
ttwu_do_activate
try_to_wake_up
complete
cpu_stopper_thread
Instead of providing yet another bandaid to work around the situation, fix
it in the hrtimers infrastructure instead: always migrate away a timer to
an online target whenever it is enqueued from an offline CPU.
This will also allow to revert all the above RCU disgraceful hacks.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Vlad Poenaru <vlad.wing@gmail.com>
Reported-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250117232433.24027-1-frederic@kernel.org
Closes: 20241213203739.1519801-1-usamaarif642@gmail.com
|
|
- Fix potential string truncation in dw_pcie_edma_irq_verify() (Niklas
Cassel)
- Don't wait for link up in DWC core if driver can detect Link Up event
(Krishna chaitanya chundru)
- If qcom 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya chundru)
- Use dw-rockchip dll_link_up IRQ to detect Link Up and enumerate devices
so users don't have to manually rescan (Niklas Cassel)
- In dw-rockchip, the 'sys' interrupt is required and detects Link Up
events, so tell DWC core not to wait for link up (Niklas Cassel)
- Always stop link in dw_pcie_suspend_noirq(), which is required at least
for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending PME_TURN_OFF
message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add stubs for dw_pcie_suspend_noirq() dw_pcie_resume_noirq() when
CONFIG_PCIE_DW_HOST is not defined so drivers don't need #ifdefs (Bjorn
Helgaas)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add imx6 suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program an
internal Address Translation Unit (iATU) (Frank Li)
* pci/controller/dwc:
PCI: dwc: Simplify config resource lookup
of: address: Add parent_bus_addr to struct of_pci_range
PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support
PCI: imx6: Use DWC common suspend resume method
PCI: dwc: Add dw_pcie_suspend_noirq(), dw_pcie_resume_noirq() stubs for !CONFIG_PCIE_DW_HOST
PCI: dwc: Remove LTSSM state test in dw_pcie_suspend_noirq()
PCI: dwc: Always stop link in the dw_pcie_suspend_noirq
PCI: dw-rockchip: Don't wait for link since we can detect Link Up
PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ
PCI: qcom: Update ICC and OPP values after Link Up event
PCI: qcom: Don't wait for link if we can detect Link Up
PCI: dwc: Don't wait for link up if driver can detect Link Up event
PCI: dwc: Fix potential truncation in dw_pcie_edma_irq_verify()
# Conflicts:
# drivers/pci/controller/dwc/pci-imx6.c
|
|
- Add host bridge .enable_device() and .disable_device() hooks for bridges
that need to configure things like Requester ID to StreamID mapping when
enabling devices (Frank Li)
- Add imx6 Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and .disable_device()
hooks so drivers that use pci_host_common_probe() instead of their own
.probe() have a way to set the .enable_device() callbacks (Marc Zyngier)
- Convert pcie-apple StreamID mapping configuration from a bus notifier to
the .enable_device() and .disable_device() callbacks (Marc Zyngier)
* pci/controller/iommu-map:
PCI: apple: Convert to {en,dis}able_device() callbacks
PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_ops
PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
PCI: Add enable_device() and disable_device() callbacks for bridges
|
|
- Destroy the EPC device in devm_pci_epc_destroy(), which previously didn't
call devres_release() (Zijun Hu)
- Simplify pci_epc_get() with class_find_device_by_name() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which previously
caused a subsequent pci_epf_add_vepf() to fail with -EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we don't
depend on the BAR_MASK reset value being larger than the requested BAR
size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent reads
from bypassing the iATU if we reduced the BAR size (Niklas Cassel)
- Verify address alignment when programming iATU so we don't attempt to
write bits that are read-only because of the BAR size, which could lead
to directing accesses to the wrong address (Niklas Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from trying to
change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint driver
sets the BAR (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Verify that requested BAR size is a power of two
PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
PCI: artpec6: Implement dw_pcie_ep operation get_features
PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()
PCI: dwc: ep: Write BAR_MASK before iATU registers in pci_epc_set_bar()
PCI: endpoint: Finish virtual EP removal in pci_epf_remove_vepf()
PCI: endpoint: Simplify pci_epc_get()
PCI: endpoint: Destroy the EPC device in devm_pci_epc_destroy()
PCI: endpoint: Replace magic number '6' by PCI_STD_NUM_BARS
|
|
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core logging
rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Add #defines for TLP Header/Prefix log sizes (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can read the
correct number of DWORDs from the TLP Prefix Log (Ilpo Järvinen)
- Read TLP Prefixes in addition to the Header Log in pcie_read_tlp_log()
(Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and Prefix
Log (Ilpo Järvinen)
* pci/err:
PCI: Add pcie_print_tlp_log() to print TLP Header and Prefix Log
PCI: Add TLP Prefix reading to pcie_read_tlp_log()
PCI: Store number of supported End-End TLP Prefixes
PCI: Use unsigned int i in pcie_read_tlp_log()
PCI: Use same names in pcie_read_tlp_log() prototype and definition
PCI: Add defines for TLP Header/Prefix log sizes
PCI: Move TLP Log handling to its own file
PCI: Don't expose pcie_read_tlp_log() outside PCI subsystem
|
|
init_once is called when an object doesn't come from the cache, and
hence needs initial clearing of certain members. While the whole
struct could get cleared by memset() in that case, a few of the cache
members are large enough that this may cause unnecessary overhead if
the caches used aren't large enough to satisfy the workload. For those
cases, some churn of kmalloc+kfree is to be expected.
Ensure that the 3 users that need clearing put the members they need
cleared at the start of the struct, and wrap the rest of the struct in
a struct group so the offset is known.
While at it, improve the interaction with KASAN such that when/if
KASAN writes to members inside the struct that should be retained over
caching, it won't trip over itself. For rw and net, the retaining of
the iovec over caching is disabled if KASAN is enabled. A helper will
free and clear those members in that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull AT_EXECVE_CHECK from Kees Cook:
- Implement AT_EXECVE_CHECK flag to execveat(2) (Mickaël Salaün)
- Implement EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits
(Mickaël Salaün)
- Add selftests and samples for AT_EXECVE_CHECK (Mickaël Salaün)
* tag 'AT_EXECVE_CHECK-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ima: instantiate the bprm_creds_for_exec() hook
samples/check-exec: Add an enlighten "inc" interpreter and 28 tests
selftests: ktap_helpers: Fix uninitialized variable
samples/check-exec: Add set-exec
selftests/landlock: Add tests for execveat + AT_EXECVE_CHECK
selftests/exec: Add 32 tests for AT_EXECVE_CHECK and exec securebits
security: Add EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits
exec: Add a new AT_EXECVE_CHECK flag to execveat(2)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits)
MAINTAINERS: add entry for CRC library
powerpc/crc: delete obsolete crc-vpmsum_test.c
lib/crc32test: delete obsolete crc32test.c
lib/crc16_kunit: delete obsolete crc16_kunit.c
lib/crc_kunit.c: add KUnit test suite for CRC library functions
powerpc/crc-t10dif: expose CRC-T10DIF function through lib
arm64/crc-t10dif: expose CRC-T10DIF function through lib
arm/crc-t10dif: expose CRC-T10DIF function through lib
x86/crc-t10dif: expose CRC-T10DIF function through lib
crypto: crct10dif - expose arch-optimized lib function
lib/crc-t10dif: add support for arch overrides
lib/crc-t10dif: stop wrapping the crypto API
scsi: target: iscsi: switch to using the crc32c library
f2fs: switch to using the crc32 library
jbd2: switch to using the crc32c library
ext4: switch to using the crc32c library
lib/crc32: make crc32c() go directly to lib
bcachefs: Explicitly select CRYPTO from BCACHEFS_FS
x86/crc32: expose CRC32 functions through lib
x86/crc32: update prototype for crc32_pclmul_le_16()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- more conversions to the guard notation in the input core
- a fix for NXP BBNSM power key driver to clean up wake IRQ after
unbinding
- several new vendor/device ID pairs added to xpad game controller
driver
- several drivers switched to using str_enable_disable and similar
helpers instead of open-coding
- add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
works out of the box (if userspace is ready to handle it)
- evbug input handler has been removed (debugging through evdev is
strongly preferred to dumping all events into the kernel log).
* tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
Input: synaptics - fix crash when enabling pass-through port
Input: atkbd - map F23 key to support default copilot shortcut
Input: xpad - add support for Nacon Evol-X Xbox One Controller
Input: xpad - add unofficial Xbox 360 wireless receiver clone
Input: xpad - add support for wooting two he (arm)
Input: xpad - improve name of 8BitDo controller 2dc8:3106
Input: xpad - add QH Electronics VID/PID
Input: joystick - use str_off_on() helper in sw_connect()
Input: Use str_enable_disable-like helpers
Input: use guard notation in input core
Input: poller - convert locking to guard notation
Input: mt - make use of __free() cleanup facility
Input: mt - convert locking to guard notation
Input: ff-memless - make use of __free() cleanup facility
Input: ff-memless - convert locking to guard notation
Input: ff-core - make use of __free() cleanup facility
Input: ff-core - convert locking to guard notation
Input: remove evbug driver
Input: mma8450 - add chip ID check in probe
Input: bbnsm_pwrkey - add remove hook
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- newly added support for Intel Touch Host Controller (Even Xu, Xinpeng
Sun)
- hid-core fix for long-standing syzbot-reported cornercase of
Resolution Multiplier not being present in any of the Logical
Collections in the device HID report descriptor (Alan Stern)
- improvement of behavior for non-standard LED brightness values for
Wacom driver (Jason Gerecke)
- PCI Wacom device support (depends on Intel THC support) (Even Xu)
- SteelSeries Arctis 9 support (Christian Mayer)
- constification of 'struct bin_attribute' in various HID driver
(Thomas Weißschuh)
- other assorted code cleanups / fixes and device ID additions
* tag 'hid-for-linus-2025012001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (63 commits)
HID: hid-asus: Disable OOBE mode on the ProArt P16
HID: steelseries: remove unnecessary return
HID: steelseries: export model and manufacturer
HID: steelseries: export charging state for the SteelSeries Arctis 9 headset
HID: steelseries: add SteelSeries Arctis 9 support
HID: steelseries: preparation for adding SteelSeries Arctis 9 support
HID: intel-thc-hid: fix build errors in um mode
HID: intel-thc-hid: intel-quicki2c: fix potential memory corruption
HID: intel-thc-hid: intel-thc: Fix error code in thc_i2c_subip_init()
HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch
HID: uclogic: make const read-only array touch_ring_model_params_buf static
HID: hid-steam: Make sure rumble work is canceled on removal
HID: Wacom: Add PCI Wacom device support
HID: intel-thc-hid: intel-quicki2c: Add PM implementation
HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver
HID: intel-thc-hid: intel-quicki2c: Add HIDI2C protocol implementation
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver hid layer
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton
HID: intel-thc-hid: intel-quickspi: Add PM implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The most significant change here is replacing msleep() in
acpi_os_sleep() with usleep_range() to reduce spurious sleep time due
to timer inaccuracy which may spectacularly reduce the duration of
system suspend and resume transitions on some systems.
All of the other changes fall into the fixes and cleanups category
this time.
Specifics:
- Use usleep_range() instead of msleep() in acpi_os_sleep() to reduce
excessive delays due to timer inaccuracy, mostly affecting system
suspend and resume (Rafael Wysocki)
- Use str_enabled_disabled() string helpers in the ACPI tables
parsing code to make it easier to follow (Sunil V L)
- Update device properties parsing on systems using ACPI so that data
firmware nodes resulting from _DSD evaluation are treated as
available in firmware nodes walks (Sakari Ailus)
- Fix missing guid_t declaration in linux/prmt.h (Robert Richter)
- Update the GHES handling code to follow the global panic= policy
instead of overriding it by force-rebooting the system after a
fatal HW error has been reported (Borislav Petkov)
- Update messages printed by the ACPI battery driver to always refer
to driver extensions as "hooks" to avoid confusion with similar
functionality in the power supply subsystem in the future (Thomas
Weißschuh)
- Fix .probe() error path cleanup in the ACPI fan driver to avoid
memory leaks (Joe Hattori)
- Constify 'struct bin_attribute' in some places in the ACPI
subsystem and mark it as __ro_after_init in one place to prevent
binary blob attributes from being updated (Thomas Weißschuh)
- Add empty stubs for several ACPI-related symbols so that they can
be used when CONFIG_ACPI is unset and use them for removing
unnecessary conditional compilation from the ipu-bridge driver
(Ricardo Ribalda)"
* tag 'acpi-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
APEI: GHES: Have GHES honor the panic= setting
ACPI: PRM: Fix missing guid_t declaration in linux/prmt.h
ACPI: tables: Use string choice helpers
ACPI: property: Consider data nodes as being available
media: ipu-bridge: Remove unneeded conditional compilations
ACPI: bus: implement acpi_device_hid when !ACPI
ACPI: bus: implement for_each_acpi_consumer_dev when !ACPI
ACPI: header: implement acpi_device_handle when !ACPI
ACPI: bus: implement acpi_get_physical_device_location when !ACPI
ACPI: bus: implement for_each_acpi_dev_match when !ACPI
ACPI: bus: change the prototype for acpi_get_physical_device_location
ACPI: fan: cleanup resources in the error path of .probe()
ACPI: battery: Rename extensions to hook in messages
ACPI: OSL: Use usleep_range() in acpi_os_sleep()
ACPI: sysfs: Constify 'struct bin_attribute'
ACPI: BGRT: Constify 'struct bin_attribute'
ACPI: BGRT: Mark bin_attribute as __ro_after_init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of changes here are cpufreq updates which are dominated
by amd-pstate driver changes, like in the previous cycle. Moreover,
changes related to amd-pstate are also the majority of cpupower
utility updates.
Included are some pieces of new hardware support, like the addition of
Clearwater Forest processors support to intel_idle, new cpufreq driver
for Airoha SoCs, and Apple cpufreq driver extensions to support more
SoCs. The intel_pstate driver is also extended to be able to support
new platforms by using ACPI CPPC to compute scaling factors between
HWP performance states and frequency.
The rest is mostly fixes and cleanups in assorted pieces of power
management code.
Specifics:
- Use str_enable_disable()-like helpers in cpufreq (Krzysztof
Kozlowski)
- Extend the Apple cpufreq driver to support more SoCs (Hector
Martin, Nick Chan)
- Add new cpufreq driver for Airoha SoCs (Christian Marangi)
- Fix using cpufreq-dt as module (Andreas Kemnade)
- Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
Edwards, Sibi Sankar, Manivannan Sadhasivam)
- Fix the maximum supported frequency computation in the ACPI cpufreq
driver to avoid relying on unfounded assumptions (Gautham Shenoy)
- Fix an amd-pstate driver regression with preferred core rankings
not being used (Mario Limonciello)
- Fix a precision issue with frequency calculation in the amd-pstate
driver (Naresh Solanki)
- Add ftrace event to the amd-pstate driver for active mode (Mario
Limonciello)
- Set default EPP policy on Ryzen processors in amd-pstate (Mario
Limonciello)
- Clean up the amd-pstate cpufreq driver and optimize it to increase
code reuse (Mario Limonciello, Dhananjay Ugwekar)
- Use CPPC to get scaling factors between HWP performance levels and
frequency in the intel_pstate driver and make it stop using a
built-in scaling factor for Arrow Lake processors (Rafael Wysocki)
- Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN
for consistency with CPU offline (Christian Loehle)
- Fix superfluous updates caused by need_freq_update in the schedutil
cpufreq governor (Sultan Alsawaf)
- Allow configuring the system suspend-resume (DPM) watchdog to warn
earlier than panic (Douglas Anderson)
- Implement devm_device_init_wakeup() helper and introduce a device-
managed variant of dev_pm_set_wake_irq() (Joe Hattori, Peng Fan)
- Remove direct inclusions of 'pm_wakeup.h' which should be only
included via 'device.h' (Wolfram Sang)
- Clean up two comments in the core system-wide PM code (Rafael
Wysocki, Randy Dunlap)
- Add Clearwater Forest processor support to the intel_idle cpuidle
driver (Artem Bityutskiy)
- Clean up the Exynos devfreq driver and devfreq core (Markus
Elfring, Jeongjun Park)
- Minor cleanups and fixes for OPP (Dan Carpenter, Neil Armstrong,
Joe Hattori)
- Implement dev_pm_opp_get_bw() (Neil Armstrong)
- Expose OPP reference counting helpers for Rust (Viresh Kumar)
- Fix TSC MHz calculation in cpupower (He Rongguang)
- Add install and uninstall options to bindings Makefile and add
header changes for cpufreq.h to SWIG bindings in cpupower (John B.
Wyatt IV)
- Add missing residency header changes in cpuidle.h to SWIG bindings
in cpupower (John B. Wyatt IV)
- Add output files to .gitignore and clean them up in "make clean" in
selftests/cpufreq (Li Zhijian)
- Fix cross-compilation in cpupower Makefile (Peng Fan)
- Revise the is_valid flag handling for idle_monitor in the cpupower
utility (wangfushuai)
- Extend and clean up AMD processors support in cpupower (Mario
Limonciello)"
* tag 'pm-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
PM / OPP: Add reference counting helpers for Rust implementation
PM: sleep: wakeirq: Introduce device-managed variant of dev_pm_set_wake_irq()
cpufreq: Use str_enable_disable()-like helpers
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic
PM: sleep: convert comment from kernel-doc to plain comment
cpufreq: ACPI: Fix max-frequency computation
pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG
PM / devfreq: exynos: remove unused function parameter
OPP: OF: Fix an OF node leak in _opp_add_static_v2()
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
pm: cpupower: Add header changes for cpufreq.h to SWIG bindings
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
...
|
|
Pull ipmi updates from Corey Minyard:
- I'm switching to a new email address, so update that
- Minor fixes for formats and return values and missing ifdefs
- A fix for some error handling that causes a loss of messages
* tag 'for-linus-6.14-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: ipmi: update my email address
ipmi: ssif_bmc: Fix new request loss when bmc ready for a response
ipmi: make ipmi_destroy_user() return void
char:ipmi: Fix a not-used variable on a non-ACPI system
char:ipmi: Fix the wrong format specifier
ipmi: ipmb: Add check devm_kasprintf() returned value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- list-based mechanisms for handling auto-detected and userspace
created clients are replaced with a flag-based approach. The
resulting code is much simpler as well as the locking.
- i2c clients now get a default debugfs dir managed by the I2C core.
Drivers don't have to maintain their own directory anymore.
Driver updates:
- xiic: atomic_transfer support
- imx-lpi2c: DMA and target mode support
- riic cleanups
- npcm: better timeout handling and more precise frequency setups
- davinci: remove unused platform_data
- at24: add new compatibles for variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)"
* tag 'i2c-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: add kdoc for the new debugfs entry of clients
i2c: designware: Actually make use of the I2C_DW_COMMON and I2C_DW symbol namespaces
i2c: add core-managed per-client directory in debugfs
i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
i2c: riic: Add `riic_bus_barrier()` to check bus availability
i2c: riic: Use predefined macro and simplify clock tick calculation
i2c: riic: Mark riic_irqs array as const
i2c: riic: Make use of devres helper to request deasserted reset line
i2c: riic: Use GENMASK() macro for bitmask definitions
i2c: riic: Use BIT macro consistently
i2c: riic: Use local `dev` pointer in `dev_err_probe()`
i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
i2c: riic: Introduce a separate variable for IRQ
i2c: amd756: Remove superfluous TODO
Revert "i2c: amd756: Fix endianness handling for word data"
i2c: i801: Add lis3lv02d for Dell Precision M6800
i2c: i801: Remove unnecessary PCI function call
i2c: core: Allocate temp client on the stack in i2c_detect
i2c: slave-eeprom: Constify 'struct bin_attribute'
i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant"
* tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
mmc: sdhci-msm: Correctly set the load for the regulator
mmc: hi3798mv200: Use syscon_regmap_lookup_by_phandle_args
mmc: Use of_property_present() for non-boolean properties
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8895
mmc: sdhci-msm: convert to use custom crypto profile
mmc: crypto: add mmc_from_crypto_profile()
mmc: mtk-sd: Limit getting top_base to SoCs that require it
dt-bindings: mmc: mtk-sd: Document compatibles that need two register ranges
mmc: sdhci-acpi: Use devm_platform_ioremap_resource()
mmc: sdhci-acpi: Remove not so useful error message
dt-bindings: mmc: convert amlogic,meson-mx-sdio.txt to dtschema
dt-bindings: mmc: document mmc-slot
dt-bindings: mmc: controller: remove '|' when not needed
dt-bindings: mmc: controller: move properties common with slot out to mmc-controller-common
dt-bindings: mmc: controller: clarify the address-cells description
mmc: bcm2835: add suspend/resume pm support
dt-bindings: Drop Bhupesh Sharma from maintainers
mmc: core: don't include 'pm_wakeup.h' directly
mmc: mtk-sd: Add support for ignoring cmd response CRC
mmc: core: Introduce the MMC_RSP_R1B_NO_CRC response
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- PMBus client driver for Intel CRPS185 power supply
- PMBus client driver for Texas Instruments TPS25990
Chip support added to existing drivers:
- pmbus/max15301: Add support for MAX15303
- pmbus/adm1275: Add adm1273 support
- lm75: Add NXP P3T1755 support; with it, add I3C support to the
driver
- asus-ec-sensors: Add TUF GAMING X670E PLUS
Other notable changes:
- nct6683: Add customer IDs for several MSI and ASRock boards
- tmp108: Add regulator support
- Improve write protect support in PMBus core
- pmbus/dps920ab: Add ability to instantiate through i2c
- The hwmon core now accepts NULL as device name parameter to
[devm_]hwmon_device_register_with_info ans uses the parent device
name as fallback in that case
- The PMBus core now provides the PMBUs revision in a debugfs file
- asus-ec-sensors: Support for optional CPU fan on AMD 600
motherboards
- raspberrypi: Add PM suspend/resume support
- dell-smm: Enable manual fan control support on Dell XPS 9370
- pwm-fan: Default to maximum cooling level if provided
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (44 commits)
hwmon: pmbus: dps920ab: Add ability to instantiate through i2c
hwmon: (pwm-fan) Default to the Maximum cooling level if provided
hwmon: (asus_atk0110) Use str_enabled_disabled() and str_enable_disable() helpers
hwmon: Fix help text for aspeed-g6-pwm-tach
hwmon: (dell-smm) Add Dell XPS 9370 to fan control whitelist
hwmon: (acpi_power_meter) Fix update the power trip points on failure
hwmon: (acpi_power_meter) Fix uninitialized variables
hwmon: (core) Use device name as a fallback in devm_hwmon_device_register_with_info
hwmon: (pmbus/max15301) Add support for MAX15303
hwmon: (pmbus/adm1275) add adm1273 support
dt-bindings: hwmon: adm1275: add adm1273
hwmon: (nct6683) Add another customer ID for MSI
hwmon: (pwm-fan): Make use of device properties everywhere
hwmon: (lm75) add I3C support for P3T1755
hwmon: (lm75) separate probe into common and I2C parts
hwmon: (lm75) Remove superfluous 'client' member from private struct
hwmon: (lm75) simplify regulator handling
hwmon: (lm75) simplify lm75_write_config()
hwmon: (lm75) Hide register size differences in regmap access functions
hwmon: (pmbus/crps) Add Intel CRPS185 power supply
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Allow struct bin_attribute instances to be placed in read-only memory
for enhanced protection
- Fix a memory leak in the cht-wcove driver by using
devm_led_classdev_register()
- Fix an OF node reference leak in the netxbig driver
- Ensure PWM is disabled properly in pwm-multicolor suspend
- Add support for Texas Instruments LP8864, LP8864S, LP8866
LED-backlight drivers
- Add support for STMicroelectronics's LED1202 12-channel LED driver
- Convert LP8860 bindings to YAML format
- Add bindings for the TI LP8864/LP8866 LED drivers
- Add LED1202 LED controller bindings
- Fix path to color definitions in leds-class-multicolor.yaml
- Add pm660l compatible to qcom,spmi-flash-led bindings
- Extend cznic,turris-omnia-leds binding with interrupts property
- Add documentation for the STMicroelectronics LED1202 driver
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS
- Fix a wrong format specifier in the ledtrig-activity driver
- Fix a bug in the lp8860 driver where only half of the EEPROM was
written
* tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: triggers: Constify 'struct bin_attribute'
leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak
leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights
dt-bindings: leds: Convert LP8860 into YAML format
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
leds: pwm-multicolor: Disable PWM when going to suspend
leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata()
turris-omnia-mcu-interface.h: Move macro definitions outside of enums
MAINTAINERS: Add entry for AAEON UP board FPGA drivers
leds: Add AAEON UP board LED driver
leds: trigger: netdev: Check offload ability on interface up
leds: turris-omnia: Use uppercase first letter in all comments
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
leds: turris-omnia: Document driver private structures
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
...
|
