summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2025-01-13wifi: mac80211: Fix common size calculation for ML elementIlan Peer
When the ML type is EPCS the control bitmap is reserved, the length is always 7 and is captured by the 1st octet after the control. Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.5790376754a7.I381208cbb72b1be2a88239509294099e9337e254@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: Support dynamic link addition and removalIlan Peer
Add support for adding and removing station links: - Adding links is done asynchronously, i.e., first an ML reconfiguration action frame is sent to the AP requesting to add links, and only when the AP replies, links which were added successfully by the AP are added locally. - Removing links is done synchronously, i.e., the links are removed before sending the ML reconfiguration action frame to the AP (to avoid using this links after the AP MLD removed them but before the station got the ML reconfiguration response). In case the AP replies with a status indicating that a link removal was not successful, disconnect (as this should not happen an is an indication that something might be wrong on the AP MLD). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.ec0492a8dd21.I2869686642bbc0f86c40f284ebf7e6f644b551ab@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: ieee80211: Add some missing MLO related definitionsIlan Peer
As a preparation to support ML reconfiguration request and response, add additional ML reconfiguration definitions required to support the flow. See Section 9.4.2.321.4 in Draft P802.11be_D6.0. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.4970ca10ebfd.Ibe7f6108cd0e04b8c739a8e35a4f485f664a17e6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: skip all known membership selectorsBenjamin Berg
The GLK and EPD Selectors are also not rates, so add a new macro for the minimum value of a selector and test against that instead of the entire list. Also fix the typo in the EPD selector define. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250101070249.2c19a2dc53db.If187b7d93d8b43a6c70e422c837b7636538fb358@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: cfg80211: check extended MLD capa/ops in assocJohannes Berg
Check that additionally extended MLD capa/ops for the MLD is consistent, i.e. the same value is reported by all affiliated APs/links. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250101070249.e29f42c7ae21.Ib2cdce608321ad154e4b13103cc315c3e3cb6b2b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13Merge tag 'nvme-6.14-2025-01-12' of git://git.infradead.org/nvme into ↵Jens Axboe
for-6.14/block Pull NVMe updates from Keith: "nvme updates for Linux 6.14 - Target support for PCI-Endpoint transport (Damien) - TCP IO queue spreading fixes (Sagi, Chaitanya) - Target handling for "limited retry" flags (Guixen) - Poll type fix (Yongsoo) - Xarray storage error handling (Keisuke) - Host memory buffer free size fix on error (Francis)" * tag 'nvme-6.14-2025-01-12' of git://git.infradead.org/nvme: (25 commits) nvme-pci: use correct size to free the hmb buffer nvme: Add error path for xa_store in nvme_init_effects nvme-pci: fix comment typo Documentation: Document the NVMe PCI endpoint target driver nvmet: New NVMe PCI endpoint function target driver nvmet: Implement arbitration feature support nvmet: Implement interrupt config feature support nvmet: Implement interrupt coalescing feature support nvmet: Implement host identifier set feature support nvmet: Introduce get/set_feature controller operations nvmet: Do not require SGL for PCI target controller commands nvmet: Add support for I/O queue management admin commands nvmet: Introduce nvmet_sq_create() and nvmet_cq_create() nvmet: Introduce nvmet_req_transfer_len() nvmet: Improve nvmet_alloc_ctrl() interface and implementation nvme: Add PCI transport type nvmet: Add drvdata field to struct nvmet_ctrl nvmet: Introduce nvmet_get_cmd_effects_admin() nvmet: Export nvmet_update_cc() and nvmet_cc_xxx() helpers nvmet: Add vendor_id and subsys_vendor_id subsystem attributes ...
2025-01-13rbtree: add rb_find_add_cached() to rbtree.hRoger L. Beckermeyer III
Adds rb_find_add_cached() as a helper function for use with red-black trees. Used in btrfs to reduce boilerplate code. And since it's a new helper, the cmp() function will require both parameter to be const rb_node pointers. Suggested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-13Merge 6.13-rc7 into tty-nextGreg Kroah-Hartman
We need the serial driver fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13Merge 6.13-rc7 into driver-core-nextGreg Kroah-Hartman
We need the debugfs / driver-core fixes in here as well for testing and to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13Merge 6.13-rc4 into char-misc-nextGreg Kroah-Hartman
We need the IIO fixes in here as well, and it resolves a merge conflict in: drivers/iio/adc/ti-ads1119.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13usb: phy: Remove API devm_usb_put_phy()Zijun Hu
Static devm_usb_phy_match() is only called by API devm_usb_put_phy(), and the API has no caller now. Remove the API and the static function. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20250112-remove_api-v1-1-49cc8f792ac9@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13Merge 6.13-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-12delayacct: add delay min to record delay peakWang Yaxin
Delay accounting can now calculate the average delay of processes, detect the overall system load, and also record the 'delay max' to identify potential abnormal delays. However, 'delay min' can help us identify another useful delay peak. By comparing the difference between 'delay max' and 'delay min', we can understand the optimization space for latency, providing a reference for the optimization of latency performance. Use case ========= bash-4.4# ./getdelays -d -t 242 print delayacct stats ON TGID 242 CPU count real total virtual total delay total delay average delay max delay min 39 156000000 156576579 2111069 0.054ms 0.212296ms 0.031307ms IO count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms SWAP count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms RECLAIM count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms THRASHING count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms COMPACT count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms WPCOPY count delay total delay average delay max delay min 156 11215873 0.072ms 0.207403ms 0.033913ms IRQ count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms Link: https://lkml.kernel.org/r/20241220173105906EOdsPhzjMLYNJJBqgz1ga@zte.com.cn Co-developed-by: Wang Yong <wang.yong12@zte.com.cn> Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Co-developed-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Co-developed-by: Kun Jiang <jiang.kun2@zte.com.cn> Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Peilin He <he.peilin@zte.com.cn> Cc: tuqiang <tu.qiang35@zte.com.cn> Cc: ye xingchen <ye.xingchen@zte.com.cn> Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12kasan: fix typo in kasan_poison_new_object documentationDominik Karol Piątkowski
Fix presumed copy-paste typo of kasan_poison_new_object documentation referring to kasan_unpoison_new_object. No functional changes. Link: https://lkml.kernel.org/r/20241220181205.9663-1-dominik.karol.piatkowski@protonmail.com Fixes: 1ce9a0523938 ("kasan: rename and document kasan_(un)poison_object_data") ta") Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12include: update references to include/asm-<arch>Geert Uytterhoeven
"include/asm-<arch>" was replaced by "arch/<arch>/include/asm" a long time ago. Link: https://lkml.kernel.org/r/541258219b0441fa1da890e2f8458a7ac18c2ef9.1733404444.git.geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Andy Whitcroft <apw@canonical.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12delayacct: add delay max to record delay peakWang Yaxin
Introduce the use cases of delay max, which can help quickly detect potential abnormal delays in the system and record the types and specific details of delay spikes. Problem ======== Delay accounting can track the average delay of processes to show system workload. However, when a process experiences a significant delay, maybe a delay spike, which adversely affects performance, getdelays can only display the average system delay over a period of time. Yet, average delay is unhelpful for diagnosing delay peak. It is not even possible to determine which type of delay has spiked, as this information might be masked by the average delay. Solution ========= the 'delay max' can display delay peak since the system's startup, which can record potential abnormal delays over time, including the type of delay and the maximum delay. This is helpful for quickly identifying crash caused by delay. Use case ========= bash# ./getdelays -d -p 244 print delayacct stats ON PID 244 CPU count real total virtual total delay total delay average delay max 68 192000000 213676651 705643 0.010ms 0.306381ms IO count delay total delay average delay max 0 0 0.000ms 0.000000ms SWAP count delay total delay average delay max 0 0 0.000ms 0.000000ms RECLAIM count delay total delay average delay max 0 0 0.000ms 0.000000ms THRASHING count delay total delay average delay max 0 0 0.000ms 0.000000ms COMPACT count delay total delay average delay max 0 0 0.000ms 0.000000ms WPCOPY count delay total delay average delay max 235 15648284 0.067ms 0.263842ms IRQ count delay total delay average delay max 0 0 0.000ms 0.000000ms [wang.yaxin@zte.com.cn: update docs and fix some spelling errors] Link: https://lkml.kernel.org/r/20241213192700771XKZ8H30OtHSeziGqRVMs0@zte.com.cn Link: https://lkml.kernel.org/r/20241203164848805CS62CQPQWG9GLdQj2_BxS@zte.com.cn Co-developed-by: Wang Yong <wang.yong12@zte.com.cn> Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Co-developed-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Co-developed-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Peilin He <he.peilin@zte.com.cn> Cc: tuqiang <tu.qiang35@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Cc: ye xingchen <ye.xingchen@zte.com.cn> Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12lib min_heap: add brief introduction to Min Heap APIKuan-Wei Chiu
A short description of the Min Heap API is added to the min_heap.h, explaining its purpose for managing min-heaps and emphasizing the use of macro wrappers instead of direct function calls. For more details, users are directed to the documentation at Documentation/core-api/min_heap.rst. Link: https://lkml.kernel.org/r/20241129181222.646855-4-visitorckw@gmail.com Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12lib min_heap: improve type safety in min_heap macros by using container_ofKuan-Wei Chiu
Patch series "lib min_heap: Improve min_heap safety, testing, and documentation". Improve the min heap implementation by enhancing type safety with container_of, reducing the attack vector by replacing test function calls with inline variants, and adding a brief API introduction in min_heap.h. It also includes author information in Documentation/core-api/min_heap.rst. This patch (of 4): The current implementation of min_heap macros uses explicit casting to min_heap_char *, which prevents the compiler from detecting incorrect pointer types. This can lead to errors if non-min_heap pointers are passed inadvertently. To enhance safety, replace all explicit casts to min_heap_char * with the use of container_of(&(_heap)->nr, min_heap_char, nr). This approach ensures that the _heap parameter is indeed a min_heap_char-compatible structure, allowing the compiler to catch improper usages. Link: https://lkml.kernel.org/r/20241129181222.646855-1-visitorckw@gmail.com Link: https://lore.kernel.org/lkml/CAMuHMdVO5DPuD9HYWBFqKDHphx7+0BEhreUxtVC40A=8p6VAhQ@mail.gmail.com Link: https://lkml.kernel.org/r/20241129181222.646855-2-visitorckw@gmail.com Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12mm: clear uffd-wp PTE/PMD state on mremap()Ryan Roberts
When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. Link: https://lkml.kernel.org/r/20250107144755.1871363-2-ryan.roberts@arm.com Co-developed-by: Mikołaj Lenczewski <miko.lenczewski@arm.com> Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Closes: https://lore.kernel.org/linux-mm/810b44a8-d2ae-4107-b665-5a42eae2d948@arm.com/ Fixes: 63b2d4174c4a ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl") Cc: David Hildenbrand <david@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12module: fix writing of livepatch relocations in ROX textPetr Pavlu
A livepatch module can contain a special relocation section .klp.rela.<objname>.<secname> to apply its relocations at the appropriate time and to additionally access local and unexported symbols. When <objname> points to another module, such relocations are processed separately from the regular module relocation process. For instance, only when the target <objname> actually becomes loaded. With CONFIG_STRICT_MODULE_RWX, when the livepatch core decides to apply these relocations, their processing results in the following bug: [ 25.827238] BUG: unable to handle page fault for address: 00000000000012ba [ 25.827819] #PF: supervisor read access in kernel mode [ 25.828153] #PF: error_code(0x0000) - not-present page [ 25.828588] PGD 0 P4D 0 [ 25.829063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ 25.829742] CPU: 2 UID: 0 PID: 452 Comm: insmod Tainted: G O K 6.13.0-rc4-00078-g059dd502b263 #7820 [ 25.830417] Tainted: [O]=OOT_MODULE, [K]=LIVEPATCH [ 25.830768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 25.831651] RIP: 0010:memcmp+0x24/0x60 [ 25.832190] Code: [...] [ 25.833378] RSP: 0018:ffffa40b403a3ae8 EFLAGS: 00000246 [ 25.833637] RAX: 0000000000000000 RBX: ffff93bc81d8e700 RCX: ffffffffc0202000 [ 25.834072] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 00000000000012ba [ 25.834548] RBP: ffffa40b403a3b68 R08: ffffa40b403a3b30 R09: 0000004a00000002 [ 25.835088] R10: ffffffffffffd222 R11: f000000000000000 R12: 0000000000000000 [ 25.835666] R13: ffffffffc02032ba R14: ffffffffc007d1e0 R15: 0000000000000004 [ 25.836139] FS: 00007fecef8c3080(0000) GS:ffff93bc8f900000(0000) knlGS:0000000000000000 [ 25.836519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.836977] CR2: 00000000000012ba CR3: 0000000002f24000 CR4: 00000000000006f0 [ 25.837442] Call Trace: [ 25.838297] <TASK> [ 25.841083] __write_relocate_add.constprop.0+0xc7/0x2b0 [ 25.841701] apply_relocate_add+0x75/0xa0 [ 25.841973] klp_write_section_relocs+0x10e/0x140 [ 25.842304] klp_write_object_relocs+0x70/0xa0 [ 25.842682] klp_init_object_loaded+0x21/0xf0 [ 25.842972] klp_enable_patch+0x43d/0x900 [ 25.843572] do_one_initcall+0x4c/0x220 [ 25.844186] do_init_module+0x6a/0x260 [ 25.844423] init_module_from_file+0x9c/0xe0 [ 25.844702] idempotent_init_module+0x172/0x270 [ 25.845008] __x64_sys_finit_module+0x69/0xc0 [ 25.845253] do_syscall_64+0x9e/0x1a0 [ 25.845498] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 25.846056] RIP: 0033:0x7fecef9eb25d [ 25.846444] Code: [...] [ 25.847563] RSP: 002b:00007ffd0c5d6de8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 25.848082] RAX: ffffffffffffffda RBX: 000055b03f05e470 RCX: 00007fecef9eb25d [ 25.848456] RDX: 0000000000000000 RSI: 000055b001e74e52 RDI: 0000000000000003 [ 25.848969] RBP: 00007ffd0c5d6ea0 R08: 0000000000000040 R09: 0000000000004100 [ 25.849411] R10: 00007fecefac7b20 R11: 0000000000000246 R12: 000055b001e74e52 [ 25.849905] R13: 0000000000000000 R14: 000055b03f05e440 R15: 0000000000000000 [ 25.850336] </TASK> [ 25.850553] Modules linked in: deku(OK+) uinput [ 25.851408] CR2: 00000000000012ba [ 25.852085] ---[ end trace 0000000000000000 ]--- The problem is that the .klp.rela.<objname>.<secname> relocations are processed after the module was already formed and mod->rw_copy was reset. However, the code in __write_relocate_add() calls module_writable_address() which translates the target address 'loc' still to 'loc + (mem->rw_copy - mem->base)', with mem->rw_copy now being 0. Fix the problem by returning directly 'loc' in module_writable_address() when the module is already formed. Function __write_relocate_add() knows to use text_poke() in such a case. Link: https://lkml.kernel.org/r/20250107153507.14733-1-petr.pavlu@suse.com Fixes: 0c133b1e78cd ("module: prepare to handle ROX allocations for text") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reported-by: Marek Maslanka <mmaslanka@google.com> Closes: https://lore.kernel.org/linux-modules/CAGcaFA2hdThQV6mjD_1_U+GNHThv84+MQvMWLgEuX+LVbAyDxg@mail.gmail.com/ Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-13Merge tag 'drm-msm-next-2025-01-07' of gitlab.freedesktop.org:drm/msm into ↵Dave Airlie
drm-next Updates for v6.14 MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support MDP4: - several small fixes DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - fixed modes filtering for platforms w/o 3DMux - fixed DSPP DSPP_2 / _3 links on several platforms - corrected DSPP definitions on SDM670 - added CWB hardware blocks support - added VBIF to DPU snapshots - dropped struct dpu_rm_requirements DP: - reworked DP audio support DSI: - added SM6150 (aka QCS615) support GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
2025-01-12bitops: add generic parity calculation for u8Wolfram Sang
There are multiple open coded implementations for getting the parity of a byte in the kernel, even using different approaches. Take the pretty efficient version from SPD5118 driver and make it generally available by putting it into the bitops header. As long as there is just one parity calculation helper, the creation of a distinct 'parity.h' header was discarded. Also, the usage of hweight8() for architectures having a popcnt instruction is postponed until a use case within hot paths is desired. The motivation for this patch is the frequent use of odd parity in the I3C specification and to simplify drivers there. Changes compared to the original SPD5118 version are the addition of kernel documentation, switching the return type from bool to int, and renaming the argument of the function. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com> Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com> Link: https://lore.kernel.org/r/20250107090204.6593-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-01-12i3c: fix kdoc parameter description for module_i3c_i2c_driver()Wolfram Sang
A typo mentioned I3C when it should have been I2C. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20241219220338.10315-1-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-01-12Merge tag 'iio-for-6.14a' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Pull IIO updaate from Jonathan: IIO: 1st set of new device support, features and cleanup for 6.14 Fairly quiet cycle. Usual mix of new drivers, device support in existing drivers, features and more general rework and cleanup. There are a few late breaking or long standing but complex fixes in here as well. There is one expected merge conflict due to an upstream fix touching neighboring code in ti-ads1119. The trivial resolution is the right one with the result ending up as: struct { s16 sample; aligned_s64 timestamp; } scan; New device support ================== adi,ad4000 - Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688, AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984, AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series but with lower sampling rates and no configuration registers. Includes addition of timestamp channels. adi,adis16480 - Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks to existing driver and addition of tables. kionix,kx022a - Add support for KX134ACR-LBZ accelerometer that is similar to the KX132ACR-LBZ but with a wider (+-64G) sensor range. - Add support for KX134-1211 accelerometer that is similar to the KX132-1211 but with a wider (+-16G) sensor range. nxp,fxls8962af - Add support for fxls8974cf and fxls8967af accelerometers, Both are compatible with fxls8962af but with different device IDs which are used in presence checks. renesas,rzg2l - Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors precede this to allow for chip differences). rohm,bd79704 - New driver for this 6 channel DAC. st,mpu6050 - Support he IAM20380 which is effectively a cut down IAM20608 IMU with only a gyroscope (no accelerometer). st,stm-timmer-trigger - Add support for ADC trigger use case for the STM32MP25 SOC. Do not support the counter functionality in this driver as that is handled by the counter subsystem. ti,opt4060 - New driver for this RGBW color sensor. Driver drop =========== rohm,bu20008 - Drop as decision was made to not mass produce this light sensor after Matti had done all the work to get a driver upstream. Features ======== adi,ad_sigma_delta library + ad7124 - Allow for GPIO to check interrupt status, enabling this device on more platforms that don't obey prior (non general) assumptions on how the interrupt chips work. - Allow variation in reset sequence length allowing chip specific optimizations rather than always using worst case. adi,ad7124 - Add temperature channel support. adi,ad7173 - Add support calibration modes for this family of ADCs. adi,adxl345 - Binding update to allow specification of which interrupt line is connected (or none). - Support interrupts and FIFO based data capture. bosch,bme680 - Add regulators support. Note this required a new binding doc rather than use of trivial-devices - Runtime PM support. microchip,pac1921 - Add ACPI support including _DSM for shunt value and label. renesas,rzg2l - Enable runtime autosuspend. - Add suspend and resume support. tyhx,hx9023s - Add loading of a firmware file used to set defaults for some configuration registers. vishay,veml6030 - Support triggered buffers allowing efficient data capture at higher speeds. - Add regmap cache to reduce access to device. Cleanup and minor fixes ======================= cross-tree - Another batch of conversions to devm_regulator_get_enable_read_voltage() helper and related conversions to full devm that this enables. - Various patches using guard() to allow early returns and simpler code flow. - Various conversions from s64 timestamp __aligned(8) to aligned_s64 type. Includes a few cleanups where this unsigned and it should have been signed. - Fix up some missing types for drive-open-drain in dt-binding docs. core - Add missing documentation for iio_dmaengine_buffer_setup_ext() - Add check that all buffers passed to iio_read_channel_ext_info() and iio_read_channel_label() are page sized and page aligned. Done this way because the callbacks are almost always only used to fill sysfs attributes. The check covers the tiny percentage of cases where use is made of this data in a consumer driver. - Mark scan_timestamp memory of struct iio_dev private ensuring no drivers change the value which belongs to the IIO core. documentation - Various missing ABI docs added. - ABI docs made to use Y consistently as the wildcard for channel number. - Combine duplicate in_currentY_raw entries in ABI docs. iio-mux - Fix alignment of buffers passed to iio_channel_read_ext_info(). adi,ad_sigma_delta library - Respect keep_cs_asserted flag in read path. - Close a race condition around irq enabling and disabling. - Use explicit unsigned int in place of unsigned. adi,ad6695 - Move dt-binding header under adc sub-directory and fix include path in dt example. adi,ad7124 - Check number of channels in DT doesn't exceed what the driver can handle. - Check input specified in DT are possible. - Improved error reporting during probe. adi,ad7173 - Drop unused structure element. adi,ad7293 - Ensure power is turned on before resetting. adi,adxl345 - Some documentation simplification and parameter renames. - Add a function than unifies handling of power up and power down. - Add defines to have a complete set of registers defined. - Add missing \n to end of error messages. amlogic,meson_saradc - Simplify handling of the REG11 register access. awinic,aw96104 - Constify iio_info structure. bosch,bmp085 - Add to dt-binding to indicate devices support SPI. bosch,bmp280 - Use sizeof() to replace a somewhat magic 2. - Rename sleep related variables so the unit is included and use fsleep() to replace usleep_range() calls. bosch,bno055 - Constify struct bin_attribute capella,cm3232 - Reset device before checking hardware ID inline with suggested flow from datasheet. diolan,dln2 - Simplify zeroing of structure used to gather up data by just clearing the whole thing before writing rather than trying to clear out he padding after write. freescale,vf610 - Use devm_ and dev_error_probe() to simplify code and allow dropping of explicit remove() callback. invensense,timestamp library - Use a cast to remove possibility of integer overflow. kionix,kx022a - Increase reset delay a little. maxim,max1363 - Use a buffer of sufficient size in iio_priv() rather than allocating variable sized buffer at use time. microchip,mcp4725 - Replace of_property_read_bool() with of_property_present() for detecting presence of regulator which is obviously not a bool. nxp,fxls8962af - Add wakeup-source property to the dt binding to allow these sensors to wake the system up from suspend. - Enable finer grained build when not all bus types need to be supported. renesas,rzg2l - Use dev_err_probe(), improving handling of probe errors and simplifying code. - Convert to devm_ based cleanup. - Remove unnecessary runtime PM complexity as clocks are managed through PM domains. - Switch pm_ptr() removing need for __maybe_unused markings. - use read_poll_timeout() to replace open coded equivalent. samsung, ssp_sensors - Simplify code by always providing timestamp whether or not it is enabled. st,lsm6dsx - Avoid need to include linux/i3c/master by using i3cdev_to_dev() to get to the contained struct device. st,stm32-timer-trigger - Check for clk_enable() fails. vishay,veml6030 - Use new gts-helper functions and fix the _scale attribute to take into account changes in gain and integration time. Various other typo fixes in variable names + documentation and help text. A few whitespace cleanup patches. * tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits) iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment iio: adc: ad7625: Add ending newlines to error messages iio: accel: adxl345: complete the list of defines iio: accel: adxl345: add FIFO with watermark events iio: accel: adxl345: initialize FIFO delay value for SPI iio: accel: adxl345: introduce interrupt handling iio: light: veml3235: fix scale to conform to ABI iio: gts-helper: add helpers to ease searches of gain_sel and new_gain iio: light: veml3235: extend regmap to add cache iio: light: veml3235: fix code style dt-bindings: iio: accel: adxl345: add interrupt-names dt-bindings: iio: accel: adxl345: make interrupts not a required property dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access iio: adc: meson: use tabs instead of spaces for some REG11 bit fields iio: adc: meson: fix voltage reference selection field name typo iio: adc: rockchip: correct alignment of timestamp iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64 ...
2025-01-12Merge tag 'coresight-next-v6.14' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Pull coresight updates from Suzuki: coresight: Updates for Linux v6.14 Coresight self-hosted tracing subsystem updates for v6.14 includes: - Support for static traceid allocation for devices - Support for impdef, static trace filtering in Qualcomm replicators - Miscellaneous fixes Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight-tpda: Optimize the function of reading element size coresight: Add support for trace filtering by source coresight: Add a helper to check if a device is source dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering coresight: Fix dsb_mode_store() unsigned val is never less than zero coresight: dummy: Add static trace id support for dummy source coresight: Add support to get static id for system trace sources dt-bindings: arm: Add arm,static-trace-id for coresight dummy source coresight: Drop atomics in connection refcounts Coresight: Narrow down the matching range of tpdm
2025-01-12net/mlx5: Add nic_cap_reg and vhca_icm_ctrl registersAkiva Goldberger
Add nic_cap_reg and vhca_icm_ctrl registers interfaces for exposing ICM consumption. Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250109204231.1809851-5-tariqt@nvidia.com Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-01-12net/mlx5: SHAMPO: Introduce new SHAMPO specific HCA capsSaeed Mahameed
Read and cache SHAMPO specific caps for header data split capabilities. Will be used in downstream patch. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250109204231.1809851-4-tariqt@nvidia.com Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-01-12net/mlx5: Add support for MRTCQ registerJianbo Liu
Management Real Time Clock Query (MRTCQ) register is used to query hardware clock identity. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250109204231.1809851-3-tariqt@nvidia.com Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-01-12net/mlx5: Update mlx5_ifc to support FEC for 200G per lane link modesJianbo Liu
Add FEC admin and override related fields in PPLM, and the bit in PCAM to indicate those fields are supported. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250109204231.1809851-2-tariqt@nvidia.com Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-01-11mm/slab: Move kvfree_rcu() into SLABUladzislau Rezki (Sony)
Move kvfree_rcu() functionality to the slab_common.c file. The reason to have kvfree_rcu() functionality as part of SLAB is that there is a clear trend and need of closer integration. One of the recent example is creating a barrier function for SLAB caches. Another reason is to prevent of having several implementations of RCU machinery for reclaiming objects after a GP. As future steps, it can be more integrated(easier) with SLAB internals. Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Acked-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com> Tested-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2025-01-11rcu/kvfree: Initialize kvfree_rcu() separatelyUladzislau Rezki (Sony)
Introduce a separate initialization of kvfree_rcu() functionality. For such purpose a kfree_rcu_batch_init() is renamed to a kvfree_rcu_init() and it is invoked from the main.c right after rcu_init() is done. Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Acked-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com> Tested-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2025-01-11Merge tag 'soc-fixes-6.13-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "Over the Christmas break a couple of devicetree fixes came in for Rockchips, Qualcomm and NXP/i.MX. These add some missing board specific properties, address build time warnings, The USB/TOG supoprt on X1 Elite regressed, so two earlier DT changes get reverted for now. Aside from the devicetree fixes, there is One build fix for the stm32 firewall driver, and a defconfig change to enable SPDIF support for i.MX" * tag 'soc-fixes-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: firewall: remove misplaced semicolon from stm32_firewall_get_firewall arm64: dts: rockchip: add hevc power domain clock to rk3328 arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S arm64: dts: qcom: sa8775p: fix the secure device bootup issue Revert "arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers" Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports" arm64: dts: qcom: x1e80100: Fix up BAR space size for PCIe6a Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports" ARM: dts: imxrt1050: Fix clocks for mmc ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF arm64: dts: imx95: correct the address length of netcmix_blk_ctrl arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B arm64: dts: rockchip: add reset-names for combphy on rk3568 arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
2025-01-10nvmet: Implement host identifier set feature supportDamien Le Moal
The NVMe specifications mandate support for the host identifier set_features for controllers that also supports reservations. Satisfy this requirement by implementing handling of the NVME_FEAT_HOST_ID feature for the nvme_set_features command. This implementation is for now effective only for PCI target controllers. For other controller types, the set features command is failed with a NVME_SC_CMD_SEQ_ERROR status as before. As noted in the code, 128 bits host identifiers are supported since the NVMe base specifications version 2.1 indicate in section 5.1.25.1.28.1 that "The controller may support a 64-bit Host Identifier...". The RHII (Reservations and Host Identifier Interaction) bit of the controller attribute (ctratt) field of the identify controller data is also set to indicate that a host ID of "0" is supported but that the host ID must be a non-zero value to use reservations. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-01-10nvme: Add PCI transport typeDamien Le Moal
Define the transport type NVMF_TRTYPE_PCI for PCI endpoint targets. This transport type is defined using the value 0 which is reserved in the NVMe base specifications v2.1 (Figure 294). Given that struct nvmet_port are zeroed out on creation, to avoid having this transsport type becoming the new default, nvmet_referral_make() and nvmet_ports_make() are modified to initialize a port discovery address transport type field (disc_addr.trtype) to NVMF_TRTYPE_MAX. Any port using this transport type is also skipped and not reported in the discovery log page (nvmet_execute_disc_get_log_page()). The helper function nvmet_is_pci_ctrl() is also introduced to check if a target controller uses the PCI transport. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-01-10nvme: Move opcode string helper functions declarationsDamien Le Moal
Move the declaration of all helper functions converting NVMe command opcodes and status codes into strings from drivers/nvme/host/nvme.h into include/linux/nvme.h, together with the commands definitions. This allows NVMe target drivers to call these functions without having to include a host header file. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-01-10net: hide the definition of dev_get_by_napi_id()Jakub Kicinski
There are no module callers of dev_get_by_napi_id(), and commit d1cacd747768 ("netdev: prevent accessing NAPI instances from another namespace") proves that getting NAPI by id needs to be done with care. So hide dev_get_by_napi_id(). Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250110004924.3212260-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: phy: add configuration of rx clock stop modeRussell King (Oracle)
Add a function to allow configuration of the PCS's clock stop enable bit, used to configure whether the xMII receive clock can be stopped during LPI mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDR-0002Jl-Ry@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10Merge tag 'vfs-6.13-rc7.fixes.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "afs: - Fix the maximum cell name length - Fix merge preference rule failure condition fuse: - Fix fuse_get_user_pages() so it doesn't risk misleading the caller to think pages have been allocated when they actually haven't - Fix direct-io folio offset and length calculation netfs: - Fix async direct-io handling - Fix read-retry for filesystems that don't provide a ->prepare_read() method vfs: - Prevent truncating 64-bit offsets to 32-bits in iomap - Fix memory barrier interactions when polling - Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags leading to MNT_ONRB to not be raised and invalid access to a list member" * tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: poll: kill poll_does_not_wait() sock_poll_wait: kill the no longer necessary barrier after poll_wait() io_uring_poll: kill the no longer necessary barrier after poll_wait() poll_wait: kill the obsolete wait_address check poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll() afs: Fix merge preference rule failure condition netfs: Fix read-retry for fs with no ->prepare_read() netfs: Fix kernel async DIO fs: kill MNT_ONRB iomap: avoid avoid truncating 64-bit offset to 32 bits afs: Fix the maximum cell name length fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure fuse: fix direct io folio offset and length calculation
2025-01-11export: Add __gendwarfksyms_ptr_ references to exported symbolsSami Tolvanen
With gendwarfksyms, we need each TU where the EXPORT_SYMBOL() macro is used to also contain DWARF type information for the symbols it exports. However, as a TU can also export external symbols and compilers may choose not to emit debugging information for symbols not defined in the current TU, the missing types will result in missing symbol versions. Stand-alone assembly code also doesn't contain type information for exported symbols, so we need to compile a temporary object file with asm-prototypes.h instead, and similarly need to ensure the DWARF in the temporary object file contains the necessary types. To always emit type information for external exports, add explicit __gendwarfksyms_ptr_<symbol> references to them in EXPORT_SYMBOL(). gendwarfksyms will use the type information for __gendwarfksyms_ptr_* if needed. Discard the pointers from the final binary to avoid further bloat. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-01-10Merge tag 'regulator-fix-v6.13-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes for !REGULATOR and !OF configurations, adding missing stubs" * tag 'regulator-fix-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATOR regulator: Guard of_regulator_bulk_get_all() with CONFIG_OF
2025-01-10spi: spi-mem: Estimate the time taken by operationsMiquel Raynal
In the SPI-NAND layer, we currently make list of operation variants from the fastest one to the slowest and there is a bit of logic in the core to go over them and pick the first one that is supported by the controller, ie. the fastest one among the supported ops. This kind of logic only works if all operations run at the same frequency, but as soon as we introduce per operation max frequencies it is not longer as obvious which operation will be faster, especially since it also depends on the PCB/controller frequency limitation. One way to make this choice more clever is to go over all the variants and for each of them derive an indicator which will help derive the theoretical best. In this case, we derive a theoretical duration for the entire operation and we take the smallest one. Add a helper that parses the spi-mem operation and returns this value. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://patch.msgid.link/20250110-winbond-6-11-rc1-quad-support-v3-20-7ab4bd56cf6e@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-10VMCI: fix reference to ioctl-number.rstAlyssa Ross
There has never been an ioctl-number.h — this must have been a typo for ioctl-number.txt (which later become ioctl-number.rst). At the time this comment was written, the note didn't actually end up appearing anywhere, but I fixed the omission from ioctl-number.rst in 0a8e4dc1d353 ("Documentation: ioctl: document 0x07 ioctl code"). Fixes: 20259849bb1a ("VMCI: Some header and config files.") Signed-off-by: Alyssa Ross <hi@alyssa.is> Link: https://lore.kernel.org/r/re3xng4uwull2cu53xnu5dtv3wlstfiv3v7rmbwtw2qbvj5mo3@q45iujse5ovc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10serial: 8250: Switch to nbcon consoleJohn Ogness
Implement the necessary callbacks to switch the 8250 console driver to perform as an nbcon console. Add implementations for the nbcon console callbacks: ->write_atomic() ->write_thread() ->device_lock() ->device_unlock() and add CON_NBCON to the initial @flags. All register access in the callbacks are within unsafe sections. The ->write_atomic() and ->write_thread() callbacks allow safe handover/takeover per byte and add a preceding newline if they take over from another context mid-line. For the ->write_atomic() callback, a new irq_work is used to defer modem control since it may be called from a context that does not allow waking up tasks. Note: A new __serial8250_clear_IER() is introduced for direct clearing of UART_IER. This will allow to restore the lockdep check to serial8250_clear_IER() in a follow-up commit. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20250107212702.169493-6-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10serial: 8250: Provide flag for IER toggling for RS485John Ogness
For RS485 mode, if SER_RS485_RX_DURING_TX is not available, the console ->write() callback needs to enable/disable Tx. It does this by calling the ->rs485_start_tx() and ->rs485_stop_tx() callbacks. However, some of these callbacks also disable/enable interrupts and makes power management calls. This causes 2 problems for console writing: 1. A console write can occur in contexts that are illegal for pm_runtime_*(). It is not even necessary for console writing to use pm_runtime_*() because a console already does this in serial8250_console_setup() and serial8250_console_exit(). 2. The console ->write() callback already handles disabling/enabling the interrupts by properly restoring the previous IER value. Add an argument @toggle_ier to the ->rs485_start_tx() and ->rs485_stop_tx() callbacks to specify if they may disable/enable receive interrupts while using pm_runtime_*(). Console writing will not allow the toggling. For all call sites other than console writing there is no functional change. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20250107212702.169493-5-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10devres: add devm_remove_action_nowarn()Danilo Krummrich
devm_remove_action() warns if the action to remove does not exist (anymore). The Rust devres abstraction, however, has a use-case to call devm_remove_action() at a point where it can't be guaranteed that the corresponding action hasn't been released yet. In particular, an instance of `Devres<T>` may be dropped after the action has been released. So far, `Devres<T>` worked around this by keeping the inner type alive. Hence, add devm_remove_action_nowarn(), which returns an error code if the action has been removed already. A subsequent patch uses devm_remove_action_nowarn() to remove the action when `Devres<T>` is dropped. Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250107122609.8135-1-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10drivers: core: remove device_link argument from ↵Heiner Kallweit
class_compat_[create|remove]_link After 7e722083fcc3 ("i2c: Remove I2C_COMPAT config symbol and related code") there's no caller left passing a non-null device_link argument. So remove this argument to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/db49131d-fd79-4f23-93f2-0ab541a345fa@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10block: add a queue_limits_commit_update_frozen helperChristoph Hellwig
Add a helper that freezes the queue, updates the queue limits and unfreezes the queue and convert all open coded versions of that to the new helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250110054726.1499538-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10block: fix docs for freezing of queue limits updatesChristoph Hellwig
queue_limits_commit_update is the function that needs to operate on a frozen queue, not queue_limits_start_update. Update the kerneldoc comments to reflect that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250110054726.1499538-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10driver core: Move two simple APIs for finding child device to headerZijun Hu
The following two APIs are for finding child device, and both only have one line code in function body. device_find_child_by_name() device_find_any_child() Move them to header as static inline function. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20250105-class_fix-v6-8-3a2f1768d4d4@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10driver core: Introduce device_iter_t for device iterating APIsZijun Hu
There are several for_each APIs which has parameter with type below: int (*fn)(struct device *dev, void *data) They iterate over various device lists and call @fn() for each device with caller provided data @*data, and they usually need to modify @*data. Give the type an dedicated typedef with advantages shown below: typedef int (*device_iter_t)(struct device *dev, void *data) - Shorter API declarations and definitions - Prevent further for_each APIs from using bad parameter type So introduce device_iter_t and apply it to various existing APIs below: bus_for_each_dev() (class|driver)_for_each_device() device_for_each_child(_reverse|_reverse_from)(). Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20250105-class_fix-v6-7-3a2f1768d4d4@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-28 13:35:56 +0000