summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2020-05-07Merge 'x86/urgent' into x86/cpuBorislav Petkov
... to resolve conflicting changes to arch/x86/kernel/apic/apic.c Signed-off-by: Borislav Petkov <bp@suse.de>
2020-05-07PCI: host-generic: Eliminate pci_host_common_probe wrappersRob Herring
Most ECAM host drivers are just different pci_ecam_ops which can be DT match table data. That's already the case in some cases, but let's do that for all the ECAM drivers. Then we can use of_device_get_match_data() in pci_host_common_probe() and eliminate the probe wrapper functions and use pci_host_common_probe() directly for probe. Link: https://lore.kernel.org/r/20200409234923.21598-4-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <amurray@thegoodpenguin.co.uk> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Cc: linux-pci@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix reference count leaks in various parts of batman-adv, from Xiyu Yang. 2) Update NAT checksum even when it is zero, from Guillaume Nault. 3) sk_psock reference count leak in tls code, also from Xiyu Yang. 4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in fq_codel, from Eric Dumazet. 5) Fix panic in choke_reset(), also from Eric Dumazet. 6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan. 7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet. 8) Fix crash in x25_disconnect(), from Yue Haibing. 9) Don't pass pointer to local variable back to the caller in nf_osf_hdr_ctx_init(), from Arnd Bergmann. 10) Wireguard should use the ECN decap helper functions, from Toke Høiland-Jørgensen. 11) Fix command entry leak in mlx5 driver, from Moshe Shemesh. 12) Fix uninitialized variable access in mptcp's subflow_syn_recv_sock(), from Paolo Abeni. 13) Fix unnecessary out-of-order ingress frame ordering in macsec, from Scott Dial. 14) IPv6 needs to use a global serial number for dst validation just like ipv4, from David Ahern. 15) Fix up PTP_1588_CLOCK deps, from Clay McClure. 16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from Yoshiyuki Kurauchi. 17) Fix a regression in that dsa user port errors should not be fatal, from Florian Fainelli. 18) Fix iomap leak in enetc driver, from Dejin Zheng. 19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang. 20) Initialize protocol value earlier in neigh code paths when generating events, from Roman Mashak. 21) netdev_update_features() must be called with RTNL mutex in macsec driver, from Antoine Tenart. 22) Validate untrusted GSO packets even more strictly, from Willem de Bruijn. 23) Wireguard decrypt worker needs a cond_resched(), from Jason Donenfeld. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning wireguard: send/receive: cond_resched() when processing worker ringbuffers wireguard: socket: remove errant restriction on looping to self wireguard: selftests: use normal kernel stack size on ppc64 net: ethernet: ti: am65-cpsw-nuss: fix irqs type ionic: Use debugfs_create_bool() to export bool net: dsa: Do not leave DSA master with NULL netdev_ops net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred net: stricter validation of untrusted gso packets seg6: fix SRH processing to comply with RFC8754 net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms net: dsa: ocelot: the MAC table on Felix is twice as large net: dsa: sja1105: the PTP_CLK extts input reacts on both edges selftests: net: tcp_mmap: fix SO_RCVLOWAT setting net: hsr: fix incorrect type usage for protocol variable net: macsec: fix rtnl locking issue net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del() ...
2020-05-06ethtool: provide UAPI for PHY master/slave configuration.Oleksij Rempel
This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: stricter validation of untrusted gso packetsWillem de Bruijn
Syzkaller again found a path to a kernel crash through bad gso input: a packet with transport header extending beyond skb_headlen(skb). Tighten validation at kernel entry: - Verify that the transport header lies within the linear section. To avoid pulling linux/tcp.h, verify just sizeof tcphdr. tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use. - Match the gso_type against the ip_proto found by the flow dissector. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge tag 'perf-for-bpf-2020-05-06' of ↵Alexei Starovoitov
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into bpf-next CAP_PERFMON for BPF
2020-05-06timer: add fsleep for flexible sleepingHeiner Kallweit
Sleeping for a certain amount of time requires use of different functions, depending on the time period. Documentation/timers/timers-howto.rst explains when to use which function, and also checkpatch checks for some potentially problematic cases. So let's create a helper that automatically chooses the appropriate sleep function -> fsleep(), for flexible sleeping If the delay is a constant, then the compiler should be able to ensure that the new helper doesn't create overhead. If the delay is not constant, then the new helper can save some code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge tag 'tag-chrome-platform-fixes-for-v5.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Benson Leung: "Fix a resource allocation issue in cros_ec_sensorhub.c" * tag 'tag-chrome-platform-fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before claiming sensors
2020-05-06net: phy: add concept of shared storage for PHYsMichael Walle
There are packages which contain multiple PHY devices, eg. a quad PHY transceiver. Provide functions to allocate and free shared storage. Usually, a quad PHY contains global registers, which don't belong to any PHY. Provide convenience functions to access these registers. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06kcsan: Add __kcsan_{enable,disable}_current() variantsMarco Elver
The __kcsan_{enable,disable}_current() variants only call into KCSAN if KCSAN is enabled for the current compilation unit. Note: This is typically not what we want, as we usually want to ensure that even calls into other functions still have KCSAN disabled. These variants may safely be used in header files that are shared between regular kernel code and code that does not link the KCSAN runtime. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-05-06firmware: tf: Different way of L2 cache enabling after LP2 suspendDmitry Osipenko
ASUS TF300T device may not work properly if firmware is asked to fully re-initialize L2 cache after resume from LP2 suspend. The downstream kernel of TF300T uses different opcode to enable cache after resuming from LP2, this opcode also works fine on Nexus 7 and Ouya devices. Supposedly, this may be needed by an older firmware versions. Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06iopoll: Introduce read_poll_timeout_atomic macroKai-Heng Feng
Like read_poll_timeout, an atomic variant for multiple parameter read function can be useful. Will be used by a later patch. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200424184918.30360-1-kai.heng.feng@canonical.com
2020-05-06usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer usePeter Chen
Some vendors glue layer need to handle some events for vbus, eg, some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event to handle charger detection, its charger detection is finished at glue layer code, but not at USB PHY driver. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-05Input: lm8333 - update contact emailWolfram Sang
The 'pengutronix' address is defunct for years. Use the proper contact address. Signed-off-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200502142639.18925-1-wsa@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-06bpf, sockmap: bpf_tcp_ingress needs to subtract bytes from sg.sizeJohn Fastabend
In bpf_tcp_ingress we used apply_bytes to subtract bytes from sg.size which is used to track total bytes in a message. But this is not correct because apply_bytes is itself modified in the main loop doing the mem_charge. Then at the end of this we have sg.size incorrectly set and out of sync with actual sk values. Then we can get a splat if we try to cork the data later and again try to redirect the msg to ingress. To fix instead of trying to track msg.size do the easy thing and include it as part of the sk_msg_xfer logic so that when the msg is moved the sg.size is always correct. To reproduce the below users will need ingress + cork and hit an error path that will then try to 'free' the skmsg. [ 173.699981] BUG: KASAN: null-ptr-deref in sk_msg_free_elem+0xdd/0x120 [ 173.699987] Read of size 8 at addr 0000000000000008 by task test_sockmap/5317 [ 173.700000] CPU: 2 PID: 5317 Comm: test_sockmap Tainted: G I 5.7.0-rc1+ #43 [ 173.700005] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019 [ 173.700009] Call Trace: [ 173.700021] dump_stack+0x8e/0xcb [ 173.700029] ? sk_msg_free_elem+0xdd/0x120 [ 173.700034] ? sk_msg_free_elem+0xdd/0x120 [ 173.700042] __kasan_report+0x102/0x15f [ 173.700052] ? sk_msg_free_elem+0xdd/0x120 [ 173.700060] kasan_report+0x32/0x50 [ 173.700070] sk_msg_free_elem+0xdd/0x120 [ 173.700080] __sk_msg_free+0x87/0x150 [ 173.700094] tcp_bpf_send_verdict+0x179/0x4f0 [ 173.700109] tcp_bpf_sendpage+0x3ce/0x5d0 Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/158861290407.14306.5327773422227552482.stgit@john-Precision-5820-Tower
2020-05-05binfmt_elf: remove the set_fs in fill_siginfo_noteEric W. Biederman
The code in binfmt_elf.c is differnt from the rest of the code that processes siginfo, as it sends siginfo from a kernel buffer to a file rather than from kernel memory to userspace buffers. To remove it's use of set_fs the code needs some different siginfo helpers. Add the helper copy_siginfo_to_external to copy from the kernel's internal siginfo layout to a buffer in the siginfo layout that userspace expects. Modify fill_siginfo_note to use copy_siginfo_to_external instead of set_fs and copy_siginfo_to_user. Update compat_binfmt_elf.c to use the previously added copy_siginfo_to_external32 to handle the compat case. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-05signal: refactor copy_siginfo_to_user32Christoph Hellwig
Factor out a copy_siginfo_to_external32 helper from copy_siginfo_to_user32 that fills out the compat_siginfo, but does so on a kernel space data structure. With that we can let architectures override copy_siginfo_to_user32 with their own implementations using copy_siginfo_to_external32. That allows moving the x32 SIGCHLD purely to x86 architecture code. As a nice side effect copy_siginfo_to_external32 also comes in handy for avoiding a set_fs() call in the coredump code later on. Contains improvements from Eric W. Biederman <ebiederm@xmission.com> and Arnd Bergmann <arnd@arndb.de>. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-05ARM: vexpress: Move vexpress_flags_set() into arch codeRob Herring
vexpress_flags_set() is only used by the platform SMP related code and has nothing to do with the vexpress-sysreg MFD driver other than both access the same h/w block. It's also only needed for 32-bit systems and must be built-in for them. Let's move vexpress_flags_set() closer to where it is being used. This will allow for vexpress-sysreg to be built as a module. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-05docs: filesystems: convert configfs.txt to ReSTMauro Carvalho Chehab
- Add a SPDX header; - Adjust document and section titles; - Use copyright symbol; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Add it to filesystems/index.rst. Also, as this file is alone on its own dir, and it doesn't seem too likely that other documents will follow it, let's move it to the filesystems/ root documentation dir. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/c2424ec2ad4d735751434ff7f52144c44aa02d5a.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05docs: filesystems: convert mount_api.txt to ReSTMauro Carvalho Chehab
- Add a SPDX header; - Adjust document and section titles; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Add table markups; - Add lists markups; - Add it to filesystems/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/32332c1659a28c22561cb5e64162c959856066b4.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05docs: filesystems: caching/backend-api.txt: convert it to ReSTMauro Carvalho Chehab
- Add a SPDX header; - Adjust document and section titles; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Add table markups; - Add it to filesystems/caching/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5d0a61abaa87bfe913b9e2f321e74ef7af0f3dfc.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05docs: filesystems: caching/netfs-api.txt: convert it to ReSTMauro Carvalho Chehab
- Add a SPDX header; - Adjust document and section titles; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Add it to filesystems/caching/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/cfe4cb1bf8e1f0093d44c30801ec42e74721e543.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05bus: mhi: core: Fix typo in commentJeffrey Hugo
There is a typo - "runtimet" should be "runtime". Fix it. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Offload register accesses to the controllerJeffrey Hugo
When reading or writing MHI registers, the core assumes that the physical link is a memory mapped PCI link. This assumption may not hold for all MHI devices. The controller knows what is the physical link (ie PCI, I2C, SPI, etc), and therefore knows the proper methods to access that link. The controller can also handle link specific error scenarios, such as reading -1 when the PCI link went down. Therefore, it is appropriate that the MHI core requests the controller to make register accesses on behalf of the core, which abstracts the core from link specifics, and end up removing an unnecessary assumption. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Remove link_status() callbackJeffrey Hugo
If the MHI core detects invalid data due to a PCI read, it calls into the controller via link_status() to double check that the link is infact down. All in all, this is pretty pointless, and racy. There are no good reasons for this, and only drawbacks. Its pointless because chances are, the controller is going to do the same thing to determine if the link is down - attempt a PCI access and compare the result. This does not make the link status decision any smarter. Its racy because its possible that the link was down at the time of the MHI core access, but then recovered before the controller access. In this case, the controller will indicate the link is not down, and the MHI core will precede to use a bad value as the MHI core does not attempt to retry the access. Retrying the access in the MHI core is a bad idea because again, it is racy - what if the link is down again? Furthermore, there may be some higher level state associated with the link status, that is now invalid because the link went down. The only reason why the MHI core could see "invalid" data when doing a PCI access, that is actually valid, is if the register actually contained the PCI spec defined sentinel for an invalid access. In this case, it is arguable that the MHI implementation broken, and should be fixed, not worked around. Therefore, remove the link_status() callback before anyone attempts to implement it. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: Fix parsing of mhi_flagsManivannan Sadhasivam
With the current parsing of mhi_flags, the following statement always return false: eob = !!(flags & MHI_EOB); This is due to the fact that 'enum mhi_flags' starts with index 0 and we are using direct AND operation to extract each bit. Fix this by using BIT() macros for defining the flags so that the reset of the code need not be touched. Fixes: 189ff97cca53 ("bus: mhi: core: Add support for data transfer") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05i2c: use my kernel.org address from now onWolfram Sang
The old email is still active, but for easier handling, I am going to use my kernel.org address from now on. Also, add a mailmap for the now defunct Pengutronix address. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05Merge branches 'for-next/asm' and 'for-next/insn' into for-next/btiWill Deacon
Merge in dependencies for in-kernel Branch Target Identification support. * for-next/asm: arm64: Disable old style assembly annotations arm64: kernel: Convert to modern annotations for assembly functions arm64: entry: Refactor and modernise annotation for ret_to_user x86/asm: Provide a Kconfig symbol for disabling old assembly annotations x86/32: Remove CONFIG_DOUBLEFAULT * for-next/insn: arm64: insn: Report PAC and BTI instructions as skippable arm64: insn: Don't assume unrecognized HINTs are skippable arm64: insn: Provide a better name for aarch64_insn_is_nop() arm64: insn: Add constants for new HINT instruction decode
2020-05-05Merge branch 'for-next/bti-user' into for-next/btiWill Deacon
Merge in user support for Branch Target Identification, which narrowly missed the cut for 5.7 after a late ABI concern. * for-next/bti-user: arm64: bti: Document behaviour for dynamically linked binaries arm64: elf: Fix allnoconfig kernel build with !ARCH_USE_GNU_PROPERTY arm64: BTI: Add Kconfig entry for userspace BTI mm: smaps: Report arm64 guarded pages in smaps arm64: mm: Display guarded pages in ptdump KVM: arm64: BTI: Reset BTYPE when skipping emulated instructions arm64: BTI: Reset BTYPE when skipping emulated instructions arm64: traps: Shuffle code to eliminate forward declarations arm64: unify native/compat instruction skipping arm64: BTI: Decode BYTPE bits when printing PSTATE arm64: elf: Enable BTI at exec based on ELF program properties elf: Allow arch to tweak initial mmap prot flags arm64: Basic Branch Target Identification support ELF: Add ELF program property parsing support ELF: UAPI and Kconfig additions for ELF program properties
2020-05-05i2c: pxa: move private definitions to i2c-pxa.cRussell King
Move driver-private definitions out of the i2c-pxa.h platform data header file into the driver itself. Nothing outside of the driver makes use of these constants. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05iommu: Unexport iommu_group_get_for_dev()Joerg Roedel
The function is now only used in IOMMU core code and shouldn't be used outside of it anyway, so remove the export for it. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-35-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Remove add_device()/remove_device() code-pathsJoerg Roedel
All drivers are converted to use the probe/release_device() call-backs, so the add_device/remove_device() pointers are unused and the code using them can be removed. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-33-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Export bus_iommu_probe() and make is safe for re-probingJoerg Roedel
Add a check to the bus_iommu_probe() call-path to make sure it ignores devices which have already been successfully probed. Then export the bus_iommu_probe() function so it can be used by IOMMU drivers. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-14-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Add probe_device() and release_device() call-backsJoerg Roedel
Add call-backs to 'struct iommu_ops' as an alternative to the add_device() and remove_device() call-backs, which will be removed when all drivers are converted. The new call-backs will not setup IOMMU groups and domains anymore, so also add a probe_finalize() call-back where the IOMMU driver can do per-device setup work which require the device to be set up with a group and a domain. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-8-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Add def_domain_type() callback in iommu_opsSai Praneeth Prakhya
Some devices are reqired to use a specific type (identity or dma) of default domain when they are used with a vendor iommu. When the system level default domain type is different from it, the vendor iommu driver has to request a new default domain with iommu_request_dma_domain_for_dev() and iommu_request_dm_for_dev() in the add_dev() callback. Unfortunately, these two helpers only work when the group hasn't been assigned to any other devices, hence, some vendor iommu driver has to use a private domain if it fails to request a new default one. This adds def_domain_type() callback in the iommu_ops, so that any special requirement of default domain for a device could be aware by the iommu generic layer. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> [ jroedel@suse.de: Added iommu_get_def_domain_type() function and use it to allocate the default domain ] Co-developed-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-3-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05usb: gadget: add "usb_validate_langid" functionTao Ren
The USB LANGID validation code in "check_user_usb_string" function is moved to "usb_validate_langid" function which can be used by other usb gadget drivers. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-04docs: dt: convert usage-model.txt to ReSTMauro Carvalho Chehab
- Add a SPDX header; - Adjust document title; - Use footnoote markups; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Add it to devicetree/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-04bpf: Avoid gcc-10 stringop-overflow warning in struct bpf_progArnd Bergmann
gcc-10 warns about accesses to zero-length arrays: kernel/bpf/core.c: In function 'bpf_patch_insn_single': cc1: warning: writing 8 bytes into a region of size 0 [-Wstringop-overflow=] In file included from kernel/bpf/core.c:21: include/linux/filter.h:550:20: note: at offset 0 to object 'insnsi' with size 0 declared here 550 | struct bpf_insn insnsi[0]; | ^~~~~~ In this case, we really want to have two flexible-array members, but that is not possible. Removing the union to make insnsi a flexible-array member while leaving insns as a zero-length array fixes the warning, as nothing writes to the other one in that way. This trick only works on linux-3.18 or higher, as older versions had additional members in the union. Fixes: 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200430213101.135134-6-arnd@arndb.de
2020-05-04net: partially revert dynamic lockdep key changesCong Wang
This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net: add helper eth_hw_addr_crcHeiner Kallweit
Several drivers use the same code as basis for filter hashes. Therefore let's factor it out to a helper. This way drivers don't have to access struct netdev_hw_addr internals. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04gcc-10 warnings: fix low-hanging fruitLinus Torvalds
Due to a bug-report that was compiler-dependent, I updated one of my machines to gcc-10. That shows a lot of new warnings. Happily they seem to be mostly the valid kind, but it's going to cause a round of churn for getting rid of them.. This is the really low-hanging fruit of removing a couple of zero-sized arrays in some core code. We have had a round of these patches before, and we'll have many more coming, and there is nothing special about these except that they were particularly trivial, and triggered more warnings than most. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-04cdrom: factor out a cdrom_multisession helperChristoph Hellwig
Factor out a version of the CDROMMULTISESSION ioctl handler that can be called directly from kernel space. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-04cdrom: factor out a cdrom_read_tocentry helperChristoph Hellwig
Factor out a version of the CDROMREADTOCENTRY ioctl handler that can be called directly from kernel space. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-04block: add a cdrom_device_info pointer to struct gendiskChristoph Hellwig
Add a pointer to the CDROM information structure to struct gendisk. This will allow various removable media file systems to call directly into the CDROM layer instead of abusing ioctls with kernel pointers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-04fs: Remove unneeded IS_DAX() check in io_is_direct()Ira Weiny
Remove the check because DAX now has it's own read/write methods and file systems which support DAX check IS_DAX() prior to IOCB_DIRECT on their own. Therefore, it does not matter if the file state is DAX when the iocb flags are created. Also remove io_is_direct() as it is just a simple flag check. Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-02ptp: Add adjphase function to support phase offset control.Vincent Cheng
Adds adjust phase function to take advantage of a PHC clock's hardware filtering capability that uses phase offset control word instead of frequency offset control word. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02RDMA/mlx5: Set lag tx affinity according to slaveMaor Gottlieb
The patch sets the lag tx affinity of the data QPs and the GSI QPs according to the LAG xmit slave. For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI QPs, one for each physical port. When the driver selects the GSI QP, it will consider the port affinity result. For connected QPs, the driver sets the affinity of the xmit slave. The above, ensures that RC QP and it's corresponding GSI QP will transmit from the same physical port. Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.com Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-02Merge back system-wide PM material for v5.8.Rafael J. Wysocki
2020-05-02Merge tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - fix handling of backchannel binding in BIND_CONN_TO_SESSION Bugfixes: - Fix a credential use-after-free issue in pnfs_roc() - Fix potential posix_acl refcnt leak in nfs3_set_acl - defer slow parts of rpc_free_client() to a workqueue - Fix an Oopsable race in __nfs_list_for_each_server() - Fix trace point use-after-free race - Regression: the RDMA client no longer responds to server disconnect requests - Fix return values of xdr_stream_encode_item_{present, absent} - _pnfs_return_layout() must always wait for layoutreturn completion Cleanups: - Remove unreachable error conditions" * tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix a race in __nfs_list_for_each_server() NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION SUNRPC: defer slow parts of rpc_free_client() to a workqueue. NFSv4: Remove unreachable error condition due to rpc_run_task() SUNRPC: Remove unreachable error condition xprtrdma: Fix use of xdr_stream_encode_item_{present, absent} xprtrdma: Fix trace point use-after-free race xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler() nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc() NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion
generated by cgit (git 2.34.1) at 2025-09-14 15:17:40 +0000