| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by").
This really has been a completely failed experiment. There were
no actual bugs found, and yet at this point we already have four
"fixes" to it, with nothing to show for but code churn, and it
never even made the code any safer.
In all of the cases that ended up getting "fixed", the structure
is also internally inconsistent after the n_channels setting as
the channel list isn't actually filled yet. You cannot scan with
such a structure, that's just wrong. In mac80211, the struct is
also reused multiple times, so initializing it once is no good.
Some previous "fixes" (e.g. one in brcm80211) are also just setting
n_channels before accessing the array, under the assumption that the
code is correct and the array can be accessed, further showing that
the whole thing is just pointless when the allocation count and use
count are not separate.
If we really wanted to fix it, we'd need to separately track the
number of channels allocated and the number of channels currently
used, but given that no bugs were found despite the numerous syzbot
reports, that'd just be a waste of time.
Remove the __counted_by() annotation. We really should also remove
a number of the n_channels settings that are setting up a structure
that's inconsistent, but that can wait.
Reported-by: syzbot+e834e757bd9b3d3e1251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e834e757bd9b3d3e1251
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Link: https://patch.msgid.link/20250714142130.9b0bbb7e1f07.I09112ccde72d445e11348fc2bef68942cb2ffc94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is currently hard-coded logic spread around the tree for
determining the note name for regset notes emitted in coredumps.
Now that the names are declared explicitly in <uapi/elf.h>, this can be
simplified.
In preparation for getting rid of the special-case logic, add an
explicit core_note_name field in struct user_regset for specifying the
note name explicitly. To help avoid mistakes, a convenience macro
USER_REGSET_NOTE_TYPE() is provided to set .core_note_type and
.core_note_name based on the note type.
When dumping core, use the new field to set the note name, if the
regset specifies it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250701135616.29630-3-Dave.Martin@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Commit 7717cb9bdd04 ("regset: new method and helpers for it") added a
new interface ->regset_get() for struct user_regset, and commit
1e6986c9db21 ("regset: kill ->get()") got rid of the old interface.
The kerneldoc comment block was never updated to take account of this
change, though.
Update it.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250701135616.29630-2-Dave.Martin@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Returning a large structure from the lock_stats() function causes clang
to have multiple copies of it on the stack and copy between them, which
can end up exceeding the frame size warning limit:
kernel/locking/lockdep.c:300:25: error: stack frame size (1464) exceeds limit (1280) in 'lock_stats' [-Werror,-Wframe-larger-than]
300 | struct lock_class_stats lock_stats(struct lock_class *class)
Change the calling conventions to directly operate on the caller's copy,
which apparently is what gcc does already.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250610092941.2642847-1-arnd@kernel.org
|
|
These functions to not modify the skb, add a const qualifier.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new SNMP MIB : LINUX_MIB_BEYOND_WINDOW
Incremented when an incoming packet is received beyond the
receiver window.
nstat -az | grep TcpExtBeyondWindow
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, TCP accepts incoming packets which might go beyond the
offered RWIN.
Add to tcp_sequence() the validation of packet end sequence.
Add the corresponding check in the fast path.
We relax this new constraint if the receive queue is empty,
to not freeze flows from buggy peers.
Add a new drop reason : SKB_DROP_REASON_TCP_INVALID_END_SEQUENCE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nitin Rawat <quic_nitirawa@quicinc.com> says:
This patch series adds programming support for Qualcomm UFS
to align with Hardware Specification.
In this patch series below changes are taken care.
1. Enable QUnipro Internal Clock Gating
2. Update esi_vec_mask for HW major version >= 6
Link: https://lore.kernel.org/r/20250714075336.2133-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Configurations with large numbers of FC rports per host instance are
taking a very long time to complete all devloss work. Increase potential
parallelism by using a per-rport devloss_work_q for dev_loss_work and
fast_io_fail_work.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20250707202225.1203189-1-emilne@redhat.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-07-14
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: IFC updates for disabled host PF
net/mlx5: Expose disciplined_fr_counter through HCA capabilities in mlx5_ifc
RDMA/mlx5: Fix UMR modifying of mkey page size
net/mlx5: Expose HCA capability bits for mkey max page size
====================
Link: https://patch.msgid.link/1752481357-34780-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
x25_terminate_link() has been unused since the last use was removed
in 2020 by:
commit 7eed751b3b2a ("net/x25: handle additional netdev events")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20250712205759.278777-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a follow-up for commit eb1ac9ff6c4a5 ("ipv6: anycast: Don't
hold RTNL for IPV6_JOIN_ANYCAST.").
We should not add a new device lookup API without netdevice_tracker.
Let's pass netdevice_tracker to dev_get_by_flags_rcu() and rename it
with netdev_ prefix to match other newer APIs.
Note that we always use GFP_ATOMIC for netdev_hold() as it's expected
to be called under RCU.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20250708184053.102109f6@kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250711051120.2866855-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce ufshcd_dme_rmw() API to read, modify, and write DME attributes
in UFS host controllers using a mask and value.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250714075336.2133-3-quic_nitirawa@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Drivers could leverage the fact that the VF BAR MMIO reservation is created
for total number of VFs supported by the device by resizing the BAR to
larger size when smaller number of VFs is enabled.
Add pci_iov_vf_bar_set_size() to control the size and a
pci_iov_vf_bar_get_sizes() helper to get the VF BAR sizes that will allow
up to num_vfs to be successfully enabled with the current underlying
reservation size.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250702093522.518099-6-michal.winiarski@intel.com
|
|
Similar to regular resizable BARs, VF BARs can also be resized, e.g. by the
system firmware or the PCI subsystem itself.
The capability layout is the same as PCI_EXT_CAP_ID_REBAR.
Add the capability ID and restore it as a part of IOV state.
See PCIe r6.2, sec 7.8.7.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20250702093522.518099-2-michal.winiarski@intel.com
|
|
sha1_base.h is no longer used, so remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-15-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The RDMA driver needs to map its own MMIO regions for the sake of
performance, meaning the IDPF needs to avoid mapping portions of the BAR
space. However, to be HW agnostic, the IDPF cannot assume where
these are and must avoid mapping hard coded regions as much as possible.
The IDPF maps the bare minimum to load and communicate with the
control plane, i.e., the mailbox registers and the reset state
registers. Because of how and when mailbox register offsets are
initialized, it is easier to adjust the existing defines to be relative
to the mailbox region starting address. Use a specific mailbox register
write function that uses these relative offsets. The reset state
register addresses are calculated the same way as for other registers,
described below.
The IDPF then calls a new virtchnl op to fetch a list of MMIO regions
that it should map. The addresses for the registers in these regions are
calculated by determining what region the register resides in, adjusting
the offset to be relative to that region, and then adding the
register's offset to that region's mapped address.
If the new virtchnl op is not supported, the IDPF will fallback to
mapping the whole bar. However, it will still map them as separate
regions outside the mailbox and reset state registers. This way we can
use the same logic in both cases to access the MMIO space.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement the functions to create, initialize, and destroy an RDMA vport
auxiliary device. The vport aux dev creation is dependent on the
core aux device to call idpf_idc_vport_dev_ctrl to signal that it is
ready for vport aux devices. Implement that core callback to either
create and initialize the vport aux dev or deinitialize.
RDMA vport aux dev creation is also dependent on the control plane to
tell us the vport is RDMA enabled. Add a flag in the create vport
message to signal individual vport RDMA capabilities.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add the initial idpf_idc.c file with the functions to kick off the IDC
initialization, create and initialize a core RDMA auxiliary device, and
destroy said device.
The RDMA core has a dependency on the vports being created by the
control plane before it can be initialized. Therefore, once all the
vports are up after a hard reset (either during driver load a function
level reset), the core RDMA device info will be created. It is populated
with the function type (as distinguished by the IDC initialization
function pointer), the core idc_ops function points (just stubs for
now), the reserved RDMA MSIX table, and various other info the core RDMA
auxiliary driver will need. It is then plugged on to the bus.
During a function level reset or driver unload, the device will be
unplugged from the bus and destroyed.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This shrinks the struct by 4 bytes, but also takes it from 19 to 18
cachelines on x86_64.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Nothing returns this error code.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In the case of an unknown error code from svc_authenticate or
pg_authenticate, return AUTH_ERROR with a status of AUTH_FAILED. Also
add the other auth_stat value from RFC 5531, and document all the status
codes.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Convert the svc_wake_up tracepoint into svc_pool_thread_event class.
Have it also record the pool id, and add new tracepoints for when the
thread is already running and for when there are no idle threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The rqst argument to xdr_init_encode_pages is set to NULL by all callers,
and pages is always set to buf->pages. Remove the two arguments and
hardcode the assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add HMAC support to the SHA-1 library, again following what was done for
SHA-2. Besides providing the basis for a more streamlined "hmac(sha1)"
shash, this will also be useful for multiple in-kernel users such as
net/sctp/auth.c, net/ipv6/seg6_hmac.c, and
security/keys/trusted-keys/trusted_tpm1.c. Those are currently using
crypto_shash, but using the library functions would be much simpler.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add a library interface for SHA-1, following the SHA-2 one. As was the
case with SHA-2, this will be useful for various in-kernel users. The
crypto_shash interface will be reimplemented on top of it as well.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.
In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.
Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
get_modes
Make the dp/hdmi_audio_* callback maintain the same parameter order as
get_modes and edid_read: first the bridge, then the connector.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-2-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Rename the existing sha1_init() to sha1_init_raw(), since it conflicts
with the upcoming library function. This will later be removed, but
this keeps the kernel building for the introduction of the library.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
While the HMAC library functions support both incremental and one-shot
computation and both prepared and raw keys, the combination of raw key
+ incremental was missing. It turns out that several potential users of
the HMAC library functions (tpm2-sessions.c, smb2transport.c,
trusted_tpm1.c) want exactly that.
Therefore, add the missing functions hmac_sha*_init_usingrawkey().
Implement them in an optimized way that directly initializes the HMAC
context without a separate key preparation step.
Reimplement the one-shot raw key functions hmac_sha*_usingrawkey() on
top of the new functions, which makes them a bit more efficient.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250711215844.41715-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
With PREEMPT_RT enabled, some of the calls to put_task_struct() coming
from rt_mutex_adjust_prio_chain() could happen in preemptible context and
with a mutex enqueued. That could lead to this sequence:
rt_mutex_adjust_prio_chain()
put_task_struct()
__put_task_struct()
sched_ext_free()
spin_lock_irqsave()
rtlock_lock() ---> TRIGGERS
lockdep_assert(!current->pi_blocked_on);
This is not a SCHED_EXT bug. The first cleanup function called by
__put_task_struct() is sched_ext_free() and it happens to take a
(RT) spin_lock, which in the scenario described above, would trigger
the lockdep assertion of "!current->pi_blocked_on".
Crystal Wood was able to identify the problem as __put_task_struct()
being called during rt_mutex_adjust_prio_chain(), in the context of
a process with a mutex enqueued.
Instead of adding more complex conditions to decide when to directly
call __put_task_struct() and when to defer the call, unconditionally
resort to the deferred call on PREEMPT_RT to simplify the code.
Fixes: 893cdaaa3977 ("sched: avoid false lockdep splat in put_task_struct()")
Suggested-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/aGvTz5VaPFyj0pBV@uudg.org
|
|
This lets us assert mutex::wait_lock is held whenever we access
p->blocked_on, as well as warn us for unexpected state changes.
[fix conflicts, call in more places]
[jstultz: tweaked commit subject, reworked a good bit]
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-4-jstultz@google.com
|
|
Track the blocked-on relation for mutexes, to allow following this
relation at schedule time.
task
| blocked-on
v
mutex
| owner
v
task
This all will be used for tracking blocked-task/mutex chains
with the prox-execution patch in a similar fashion to how
priority inheritance is done with rt_mutexes.
For serialization, blocked-on is only set by the task itself
(current). And both when setting or clearing (potentially by
others), is done while holding the mutex::wait_lock.
[minor changes while rebasing]
[jstultz: Fix blocked_on tracking in __mutex_lock_common in error paths]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-3-jstultz@google.com
|
|
Add a CONFIG_SCHED_PROXY_EXEC option, along with a boot argument
sched_proxy_exec= that can be used to disable the feature at boot
time if CONFIG_SCHED_PROXY_EXEC was enabled.
Also uses this option to allow the rq->donor to be different from
rq->curr.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-2-jstultz@google.com
|
|
Avoid merge conflicts
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
This reverts commit 465b9ee0ee7bc268d7f261356afd6c4262e48d82.
Such notifications fit better into core or nfnetlink_hook code,
following the NFNL_MSG_HOOK_GET message format.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Extend the devfreq_dev_profile to allow drivers optionally create
device-specific sysfs ABIs together with other common devfreq ABIs under
the devfreq device path.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/20250623143401.4095045-2-zhanjie9@hisilicon.com/
|
|
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
Document and add support for the regulators on PM7550 and PMR735B, which
can be paired with the Milos SoC.
|
|
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
|
|
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/CAKPOu+8z_ijTLHdiCYGU_Uk7yYD=shxyGLwfe-L7AV3DhebS3w@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250711151005.2956810-3-dhowells@redhat.com
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <slava@dubeyko.com>
cc: Alex Markuze <amarkuze@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Support for overlapping domains added in commit e3589f6c81e4 ("sched:
Allow for overlapping sched_domain spans") also allowed forcefully
setting SD_OVERLAP for !NUMA domains via FORCE_SD_OVERLAP sched_feat().
Since NUMA domains had to be presumed overlapping to ensure correct
behavior, "sched_domain_topology_level::flags" was introduced. NUMA
domains added the SDTL_OVERLAP flag would ensure SD_OVERLAP was always
added during build_sched_domains() for these domains, even when
FORCE_SD_OVERLAP was off.
Condition for adding the SD_OVERLAP flag at the aforementioned commit
was as follows:
if (tl->flags & SDTL_OVERLAP || sched_feat(FORCE_SD_OVERLAP))
sd->flags |= SD_OVERLAP;
The FORCE_SD_OVERLAP debug feature was removed in commit af85596c74de
("sched/topology: Remove FORCE_SD_OVERLAP") which left the NUMA domains
as the exclusive users of SDTL_OVERLAP, SD_OVERLAP, and SD_NUMA flags.
Get rid of SDTL_OVERLAP and SD_OVERLAP as they have become redundant
and instead rely on SD_NUMA to detect the only overlapping domain
currently supported. Since SDTL_OVERLAP was the only user of
"tl->flags", get rid of "sched_domain_topology_level::flags" too.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ba4dbdf8-bc37-493d-b2e0-2efb00ea3e19@amd.com
|
|
Define a small SDTL_INIT(maskfn, flagsfn, name) macro and use it to build the
sched_domain_topology_level array. Purely a cleanup; behaviour is unchanged.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250710105715.66594-2-me@linux.beauty
|
|
Add a read_folio_range() handler for buffered writes that filesystems
may pass in if they wish to provide a custom handler for synchronously
reading in the contents of a folio.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
[hch: renamed to read_folio_range, pass less arguments]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250710133343.399917-14-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The iomap_folio_ops are only used for buffered writes, including the zero
and unshare variants. Rename them to iomap_write_ops to better describe
the usage, and pass them through the call chain like the other operation
specific methods instead of through the iomap.
xfs_iomap_valid grows a IOMAP_HOLE check to keep the existing behavior
that never attached the folio_ops to a iomap representing a hole.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250710133343.399917-12-hch@lst.de
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow fuse to use iomap_writeback_folio for folio laundering. Note
that the caller needs to manually submit the pending writeback context.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250710133343.399917-11-hch@lst.de
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new iomap_start_folio_write helper to abstract away the
write_bytes_pending handling, and export it and the existing
iomap_finish_folio_write for non-iomap writeback in fuse.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250710133343.399917-7-hch@lst.de
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace the ioend pointer in iomap_writeback_ctx with a void *wb_ctx
one to facilitate non-block, non-ioend writeback for use. Rename
the submit_ioend method to writeback_submit and make it mandatory so
that the generic writeback code stops seeing ioends and bios.
Co-developed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250710133343.399917-6-hch@lst.de
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace ->map_blocks with a new ->writeback_range, which differs in the
following ways:
- it must also queue up the I/O for writeback, that is called into the
slightly refactored and extended in scope iomap_add_to_ioend for
each region
- can handle only a part of the requested region, that is the retry
loop for partial mappings moves to the caller
- handles cleanup on failures as well, and thus also replaces the
discard_folio method only implemented by XFS.
This will allow to use the iomap writeback code also for file systems
that are not block based like fuse.
Co-developed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250710133343.399917-5-hch@lst.de
Acked-by: Damien Le Moal <dlemoal@kernel.org> # zonefs
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add inode and wpc fields to pass the inode and writeback context that
are needed in the entire writeback call chain, and let the callers
initialize all fields in the writeback context before calling
iomap_writepages to simplify the argument passing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250710133343.399917-3-hch@lst.de
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
