| Age | Commit message (Collapse) | Author |
|---|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250626154244.324265-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are additional SpacemiT syscon CCUs whose registers control both
clocks and resets: RCPU, RCPU2, and APBC2. Unlike those defined
previously, these will (initially) support only resets. They do not
incorporate power domain functionality.
Previously the clock properties were required for all compatible nodes.
Make that requirement only apply to the three existing CCUs (APBC, APMU,
and MPMU), so that the new reset-only CCUs can go without specifying them.
Define the index values for resets associated with all SpacemiT K1
syscon nodes, including those with clocks already defined, as well as
the new ones (without clocks).
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-2-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add device pointer to irq_domain_info and msi_domain_info, so that the device
can be specified at domain creation time.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/943e52403b20cf13c320d55bd4446b4562466aab.1750860131.git.namcao@linutronix.de
|
|
The inlined ptp_read_system_[pre|post]ts() switch cases expand to a copious
amount of text in drivers, e.g. ~500 bytes in e1000e. Adding auxiliary
clock support to the inlines would increase it further.
Replace the inline switch case with a call to ktime_get_clock_ts64(), which
reduces the code size in drivers and allows to access auxiliary clocks once
they are enabled in the IOCTL parameter filter.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20250701132628.426168092@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Base implementation for PTP with a temporary CLOCK_AUX* workaround to
allow integration of depending changes into the networking tree.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ktime_get_clock_ts64() was provided for the networking tree as a stand
alone commit based on v6.16-rc1. It contains a temporary workaround for the
CLOCK_AUX* defines, which are only available in the timekeeping tree.
As this commit is now merged into the timers/ptp branch, which contains the
real CLOCK_AUX* defines, the workaround is obsolete.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250701130923.579834908@linutronix.de
|
|
Pull the base implementation of ktime_get_clock_ts64() for PTP, which
contains a temporary CLOCK_AUX* workaround. That was created to allow
integration of depending changes into the networking tree. The workaround
is going to be removed in a subsequent change in the timekeeping tree.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
PTP implements an inline switch case for taking timestamps from various
POSIX clock IDs, which already consumes quite some text space. Expanding it
for auxiliary clocks really becomes too big for inlining.
Provide a out of line version.
The function invalidates the timestamp in case the clock is invalid. The
invalidation allows to implement a validation check without the need to
propagate a return value through deep existing call chains.
Due to merge logistics this temporarily defines CLOCK_AUX[_LAST] if
undefined, so that the plain branch, which does not contain any of the core
timekeeper changes, can be pulled into the networking tree as prerequisite
for the PTP side changes. These temporary defines are removed after that
branch is merged into the tip::timers/ptp branch. That way the result in
-next or upstream in the next merge window has zero dependencies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250701132628.357686408@linutronix.de
|
|
The system manager indices names are different for each platform, rename
the indices for i.MX95 to differentiate with other platform.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250620055229.965942-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX94, the MQS2 also needs to be configured by SCMI interface, add
sm_index variable in struct fsl_mqs_soc_data to distinguish the MQS1 and
MQS2 on this platform.
Add the system manager indices for i.MX94 in the header file.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250620055229.965942-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.16
Couple of fixes to address:
1. The safety and memory issues in the FF-A notification callback handler:
The fixes replaces a mutex with an rwlock to prevent sleeping in atomic
context, resolving kernel warnings. Memory allocation is moved outside
the lock to support this transition safely. Additionally, a memory leak
in the notifier unregistration path is fixed by properly freeing the
callback node.
2. The missing entry in struct ffa_indirect_msg_hdr:
The fix adds the missing 32 bit reserved entry in the structure as
required by the FF-A specification.
* tag 'ffa-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the missing entry in struct ffa_indirect_msg_hdr
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context
firmware: arm_ffa: Move memory allocation outside the mutex locking
firmware: arm_ffa: Fix memory leak by freeing notifier callback node
Link: https://lore.kernel.org/r/20250609105207.1185570-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DCCP socket family has now been removed from this tree, see:
8bb3212be4b4 ("Merge branch 'net-retire-dccp-socket'")
Remove connection tracking and NAT support for this protocol, this
should not pose a problem because no DCCP traffic is expected to be seen
on the wire.
As for the code for matching on dccp header for iptables and nftables,
mark it as deprecated and keep it in place. Ruleset restoration is an
atomic operation. Without dccp matching support, an astray match on dccp
could break this operation leaving your computer with no policy in
place, so let's follow a more conservative approach for matches.
Add CONFIG_NFT_EXTHDR_DCCP which is set to 'n' by default to deprecate
dccp extension support. Similarly, label CONFIG_NETFILTER_XT_MATCH_DCCP
as deprecated too and also set it to 'n' by default.
Code to match on DCCP protocol from ebtables also remains in place, this
is just a few checks on IPPROTO_DCCP from _check() path which is
exercised when ruleset is loaded. There is another use of IPPROTO_DCCP
from the _check() path in the iptables multiport match. Another check
for IPPROTO_DCCP from the packet in the reject target is also removed.
So let's schedule removal of the dccp matching for a second stage, this
should not interfer with the dccp retirement since this is only matching
on the dccp header.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, Input and PWM due for the v6.17 merge window
|
|
feature
Introduce a new API, intel_pmt_get_regions_by_feature(), that gathers
telemetry regions based on a provided capability flag. This API enables
retrieval of regions with various capabilities (for example, RMID-based
telemetry) and provides a unified interface for accessing them. Resource
management is handled via reference counting using
intel_pmt_put_feature_group().
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-15-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add intel_pmt_get_features() in PMT Discovery to enable the PMT Telemetry
driver to obtain attributes of the aggregated telemetry spaces it
enumerates. The function gathers feature flags and associated data (like
the number of RMIDs) from each PMT entry, laying the groundwork for a
future kernel interface that will allow direct access to telemetry regions
based on their capabilities.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-14-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add functions, intel_vsec_set/get_mapping(), to set and retrieve the
OOBMSM-to-CPU mapping data in the private data of the parent Intel VSEC
driver. With this mapping information available, other Intel VSEC features
on the same OOBMSM device can easily access and use the mapping data,
allowing each of the OOBMSM features to map to the CPUs they provides data
for.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-12-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The TPMI platform information provides a mapping of OOBMSM PCI devices to
logical CPUs. Since this mapping is consistent across all OOBMSM features
(e.g., TPMI, PMT, SDSi), it can be leveraged by multiple drivers. To
facilitate reuse, relocate the struct intel_tpmi_plat_info to intel_vsec.h,
renaming it to struct oobmsm_plat_info, making it accessible to other
features. While modifying headers, place them in alphabetical order.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-11-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This patch introduces a new driver to enumerate and expose Intel Platform
Monitoring Technology (PMT) capabilities via a simple discovery mechanism.
The PMT Discovery driver parses hardware-provided discovery tables from
Intel Out of Band Management Services Modules (OOBMSM) and extracts feature
information for various providers (such as TPMI, Telemetry, Crash Log,
etc). This unified interface simplifies the process of determining which
manageability and telemetry features are supported by a given platform.
This new feature is described in the Intel Platform Monitoring Technology
3.0 specification, section 6.6 Capability.
Key changes and additions:
New file drivers/platform/x86/intel/pmt/discovery.c:
– Implements the discovery logic to map the discovery resource, read
the feature discovery table, and validate feature parameters.
New file drivers/platform/x86/intel/pmt/features.c:
– Defines feature names, layouts, and associated capability masks.
– Provides a mapping between raw hardware attributes and sysfs
representations for easier integration with user-space tools.
New header include/linux/intel_pmt_features.h:
– Declares constants, masks, and feature identifiers used across the
PMT framework.
Sysfs integration:
– Feature attributes are exposed under /sys/class/intel_pmt.
– Each device is represented by a subfolder within the intel_pmt class,
named using its DBDF (Domain:Bus:Device.Function), e.g.:
features-0000:00:03.1
– Example directory layout for a device:
/sys/class/intel_pmt/features-0000:00:03.1/
├── accelerator_telemetry
├── crash_log
├── per_core_environment_telemetry
├── per_core_performance_telemetry
├── per_rmid_energy_telemetry
├── per_rmid_perf_telemetry
├── tpmi_control
├── tracing
└── uncore_telemetry
By exposing PMT feature details through sysfs and integrating with the
existing PMT class, this driver paves the way for more streamlined
integration of PMT-based manageability and telemetry tools.
Link: https://www.intel.com/content/www/us/en/content-details/710389/intel-platform-monitoring-technology-intel-pmt-external-specification.html
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-9-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add the PCIe VSEC ID for new Intel Platform Monitoring Technology
Capability Discovery feature. Discovery provides detailed information for
the various Intel VSEC features. Also make the driver a supplier for
TPMI and Telemetry drivers which will use the information.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-8-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
New Intel VSEC features will have dependencies on other features, requiring
certain supplier drivers to be probed before their consumers. To enforce
this dependency ordering, introduce device links using device_link_add(),
ensuring that suppliers are fully registered before consumers are probed.
- Add device link tracking by storing supplier devices and tracking their
state.
- Implement intel_vsec_link_devices() to establish links between suppliers
and consumers based on feature dependencies.
- Add get_consumer_dependencies() to retrieve supplier-consumer
relationships.
- Modify feature registration logic:
* Consumers now check that all required suppliers are registered before
being initialized.
* suppliers_ready() verifies that all required supplier devices are
available.
- Prevent potential null consumer name issue in sysfs:
- Use dev_set_name() when creating auxiliary devices to ensure a
unique, non-null consumer name.
- Update intel_vsec_pci_probe() to loop up to the number of possible
features or when all devices are registered, whichever comes first.
- Introduce VSEC_CAP_UNUSED to prevent sub-features (registered via
exported APIs) from being mistakenly linked.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Renesas Camera Receiver Unit in the RZ/V2H SoC can output RAW
data captured from an image sensor without conversion to an RGB/YUV
format. In that case the data are packed into 64-bit blocks, with a
variable amount of padding in the most significant bits depending on
the bitdepth of the data. Add new V4L2 pixel format codes for the new
formats, along with documentation to describe them.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250630222734.2712390-1-dan.scally@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Use the clamp() function from minmax.h and provide a define for the max
sizes as they will be used in subsequent patches.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Callers couldn't care less which dentry did we get - anything
valid is treated as success.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instead of returning a dentry or ERR_PTR(-E...), return 0 and store
dentry into pipe->dentry on success and return -E... on failure.
Callers are happier that way...
NOTE: dummy rpc_pipe is getting ->dentry set; we never access that,
since we
1) never call rpc_unlink() for it (dentry is taken out by
->kill_sb())
2) never call rpc_queue_upcall() for it (writing to that
sucker fails; no downcalls are ever submitted, so no replies are
going to arrive)
IOW, having that ->dentry set (and left dangling) is harmless,
if ugly; cleaner solution will take more massage.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
1) pass it pipe instead of pipe->dentry
2) zero pipe->dentry afterwards
3) it always returns 0; why bother?
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Set the things up for kernel-initiated creation of object in
a tree-in-dcache filesystem. With respect to locking it's
an equivalent of filename_create() - we either get a negative
dentry with locked parent, or ERR_PTR() and no locks taken.
tracefs and debugfs had that open-coded as part of their
object creation machinery; switched to calling new helper.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
simple_recursive_removal() assumes that parent is not locked and
locks it when it finally gets to removing the victim itself.
Usually that's what we want, but there are places where the
parent is *already* locked and we need it to stay that way.
In those cases simple_recursive_removal() would, of course,
deadlock, so we have to play racy games with unlocking/relocking
the parent around the call or open-code the entire thing.
A better solution is to provide a variant that expects to
be called with the parent already locked by the caller.
Parent should be locked with I_MUTEX_PARENT, to avoid false
positives from lockdep.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.
Cc: stable@vger.kernel.org
Fixes: 2b188cc1bb857 ("Add io_uring IO interface")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/47c666c4ee1df2018863af3a2028af18feef11ed.1751412511.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce support for specifying relative bandwidth shares between
traffic classes (TC) in the devlink-rate API. This new option allows
users to allocate bandwidth across multiple traffic classes in a
single command.
This feature provides a more granular control over traffic management,
especially for scenarios requiring Enhanced Transmission Selection.
Users can now define a relative bandwidth share for each traffic class.
For example, assigning share values of 20 to TC0 (TCP/UDP) and 80 to TC5
(RoCE) will result in TC0 receiving 20% and TC5 receiving 80% of the
total bandwidth. The actual percentage each class receives depends on
the ratio of its share value to the sum of all shares.
Example:
DEV=pci/0000:08:00.0
$ devlink port function rate add $DEV/vfs_group tx_share 10Gbit \
tx_max 50Gbit tc-bw 0:20 1:0 2:0 3:0 4:0 5:80 6:0 7:0
$ devlink port function rate set $DEV/vfs_group \
tc-bw 0:20 1:0 2:0 3:0 4:0 5:20 6:60 7:0
Example usage with ynl:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"rate-tc-index": 0, "rate-tc-bw": 50},
{"rate-tc-index": 1, "rate-tc-bw": 50},
{"rate-tc-index": 2, "rate-tc-bw": 0},
{"rate-tc-index": 3, "rate-tc-bw": 0},
{"rate-tc-index": 4, "rate-tc-bw": 0},
{"rate-tc-index": 5, "rate-tc-bw": 0},
{"rate-tc-index": 6, "rate-tc-bw": 0},
{"rate-tc-index": 7, "rate-tc-bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'rate-tc-bw': 50, 'rate-tc-index': 0},
{'rate-tc-bw': 50, 'rate-tc-index': 1},
{'rate-tc-bw': 0, 'rate-tc-index': 2},
{'rate-tc-bw': 0, 'rate-tc-index': 3},
{'rate-tc-bw': 0, 'rate-tc-index': 4},
{'rate-tc-bw': 0, 'rate-tc-index': 5},
{'rate-tc-bw': 0, 'rate-tc-index': 6},
{'rate-tc-bw': 0, 'rate-tc-index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the nlmsg_for_each_attr_type() macro to simplify iteration over
attributes of a specific type in a Netlink message.
Convert existing users in vxlan and nfsd to use the new macro.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With f95f0f95cfb7("net, xdp: Introduce xdp_init_buff utility routine"),
buffer length could be stored as frame size so there's no need to have
a dedicated tun_xdp_hdr structure. We can simply store virtio net
header instead.
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250701010352.74515-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new helpers as a step to deal with potential dst->dev races.
v2: fix typo in ipv6_rthdr_rcv() (kernel test robot <lkp@intel.com>)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new helper as a step to deal with potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new helpers as a first step to deal with
potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dst->dev is read locklessly in many contexts,
and written in dst_dev_put().
Fixing all the races is going to need many changes.
We probably will have to add full RCU protection.
Add three helpers to ease this painful process.
static inline struct net_device *dst_dev(const struct dst_entry *dst)
{
return READ_ONCE(dst->dev);
}
static inline struct net_device *skb_dst_dev(const struct sk_buff *skb)
{
return dst_dev(skb_dst(skb));
}
static inline struct net *skb_dst_dev_net(const struct sk_buff *skb)
{
return dev_net(skb_dst_dev(skb));
}
static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb)
{
return dev_net_rcu(skb_dst_dev(skb));
}
Fixes: 4a6ce2b6f2ec ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dst_dev_put() can overwrite dst->output while other
cpus might read this field (for instance from dst_output())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need RCU protection in the future.
Fixes: 4a6ce2b6f2ec ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dst_dev_put() can overwrite dst->input while other
cpus might read this field (for instance from dst_input())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need full RCU protection later.
Fixes: 4a6ce2b6f2ec ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
(dst_entry)->lastuse is read and written locklessly,
add corresponding annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
(dst_entry)->expires is read and written locklessly,
add corresponding annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
(dst_entry)->obsolete is read locklessly, add corresponding
annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Move tcp_memory_allocated into a dedicated cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using per-cpu data for net->net_cookie generation is overkill,
because even busy hosts do not create hundreds of netns per second.
Make sure to put net_cookie in a private cache line to avoid
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This structure will hold networking data that must
consume a full cache line to avoid accidental false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Renesas RZ/V2N and RZ/V2H XSPI Clock DT Binding Definitions
Expanded Serial Peripheral Interface (XSPI) clock DT binding definitions
for the Renesas RZ/V2N (R9A09G056) and RZ/V2H (R9A09G057) SoCs, shared
by driver and DT source files.
|
|
Renesas RZ/T2H and RZ/N2H SDHI Clock DT Binding Definitions
SDHI clock DT binding definitions for the Renesas RZ/T2H (R9A09G077) and
RZ/N2H (R9A09G087) SoCs, shared by driver and DT source files.
|
|
Add the SDHI high-speed clock (SDHI_CLKHS) definition for the Renesas
RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs. SDHI_CLKHS is used as
a core clock for the SDHI IP and operates at 800MHz.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250625141705.151383-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add XSPI core clock definitions to the clock bindings for the Renesas
R9A09G056 and R9A09G057 SoCs. These clocks IDs are used to support XSPI
interface.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250627204237.214635-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
PR_MTE_STORE_ONLY is used to restrict the MTE tag check for store
opeartion only.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618092957.2069907-3-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There are no users outside the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630092639.1574860-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
