summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...
2019-01-21Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes and cleanups from Michael Tsirkin: "Fixes and cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/scsi: Use copy_to_iter() to send control queue response vhost: return EINVAL if iovecs size does not match the message size virtio-balloon: tweak config_changed implementation virtio: don't allocate vqs when names[i] = NULL virtio_pci: use queue idx instead of array idx to set up the vq virtio: document virtio_config_ops restrictions virtio: fix virtio_config_ops description
2019-01-21Merge tags 'compiler-attributes-for-linus-v5.0-rc3' and ↵Linus Torvalds
'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux Pull misc clang fixes from Miguel Ojeda: - A fix for OPTIMIZER_HIDE_VAR from Michael S Tsirkin - Update clang-format with the latest for_each macro list from Jason Gunthorpe * tag 'compiler-attributes-for-linus-v5.0-rc3' of git://github.com/ojeda/linux: include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR * tag 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux: clang-format: Update .clang-format with the latest for_each macro list
2019-01-19net_sched: add performance counters for basic filterCong Wang
Similar to u32 filter, it is useful to know how many times we reach each basic filter and how many times we pass the ematch attached to it. Sample output: filter protocol arp pref 49152 basic chain 0 filter protocol arp pref 49152 basic chain 0 handle 0x1 (rule hit 3 success 3) action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 installed 81 sec used 4 sec Action statistics: Sent 126 bytes 3 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-20Merge tag 'mips_fixes_5.0_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: - Fix IPI handling for Lantiq SoCs, which was broken by changes made back in v4.12. - Enable OF/DT serial support in ath79_defconfig to give us working serial by default. - Fix 64b builds for the Jazz platform. - Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers to perform DMA again following the major DMA mapping changes made in v4.19. - Disable MSI on Cavium Octeon systems when the pcie_disable command line parameter introduced in v3.3 is used, in order to avoid inadvetently accessing PCIe controller registers despite the command line. - Fix a build failure for Cavium Octeon kernels with kexec enabled, introduced in v4.20. - Fix a regression in the behaviour of semctl/shmctl/msgctl IPC syscalls for kernels including n32 support but not o32 support caused by some cleanup in v3.19. * tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: OCTEON: fix kexec support mips: fix n32 compat_ipc_parse_version Disable MSI also when pcie-octeon.pcie_disable on MIPS: BCM47XX: Setup struct device for the SoC MIPS: jazz: fix 64bit build MIPS: ath79: Enable OF serial ports in the default config MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQ MIPS: lantiq: Fix IPI interrupt handling
2019-01-20Merge tag 'libnvdimm-fixes-5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A crash fix, a build warning fix, a miscellaneous small cleanups. In case anyone is looking for them, there was a regression caught by testing that caused two patches to be dropped from this update. Those patches have been reworked and will soak for another week / re-target 5.0-rc4. - Fix driver initialization crash due to the inability to report an 'error' state for a DIMM's security capability. - Build warning fix for little-endian ARM64 builds - Fix a potential race between the EDAC driver's usage of the NFIT SMBIOS id for a DIMM and the driver shutdown path. - A small collection of one-line benign cleanups for duplicate variable assignments, a duplicate header include and a mis-typed function argument" * tag 'libnvdimm-fixes-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: Fix nvdimm_security_state() state request selection acpi/nfit: Remove duplicate set nd_set in acpi_nfit_init_interleave_set() acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id() libnvdimm/dimm: Fix security capability detection for non-Intel NVDIMMs nfit: Mark some functions as __maybe_unused ACPI/nfit: delete the function to_acpi_nfit_desc ACPI/nfit: delete the redundant header file
2019-01-19net: netlink: add helper to retrieve NETLINK_F_STRICT_CHKJakub Kicinski
Dumps can read state of the NETLINK_F_STRICT_CHK flag from a field in the callback structure. For non-dump GET requests we need a way to access the state of that flag from a socket. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: phy: phy driver features are mandatoryCamelia Groza
Since phy driver features became a link_mode bitmap, phy drivers that don't have a list of features configured will cause the kernel to crash when probed. Prevent the phy driver from registering if the features field is missing. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19sch_api: Change signature of qdisc_tree_reduce_backlog() to use intsToke Høiland-Jørgensen
There are now several places where qdisc_tree_reduce_backlog() is called with a negative number of packets (to signal an increase in number of packets in the queue). Rather than rely on overflow behaviour, change the function signature to use signed integers to communicate this usage to people reading the code. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19mac80211: minstrel_ht: add flag to indicate missing/inaccurate tx A-MPDU lengthFelix Fietkau
Some hardware (e.g. MediaTek MT7603) cannot report A-MPDU length in tx status information. Add support for a flag to indicate that, to allow minstrel_ht to use a fixed value in its internal calculation (which gives better results than just defaulting to 1). Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19nl80211/mac80211: mesh: add mesh path change count to mpath infoJulan Hsu
Expose path change count to destination in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19nl80211/mac80211: mesh: add hop count to mpath infoJulan Hsu
Expose hop count to destination information in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19mac80211: Add airtime accounting and scheduling to TXQsToke Høiland-Jørgensen
This adds airtime accounting and scheduling to the mac80211 TXQ scheduler. A new callback, ieee80211_sta_register_airtime(), is added that drivers can call to report airtime usage for stations. When airtime information is present, mac80211 will schedule TXQs (through ieee80211_next_txq()) in a way that enforces airtime fairness between active stations. This scheduling works the same way as the ath9k in-driver airtime fairness scheduling. If no airtime usage is reported by the driver, the scheduler will default to round-robin scheduling. For drivers that don't control TXQ scheduling in software, a new API function, ieee80211_txq_may_transmit(), is added which the driver can use to check if the TXQ is eligible for transmission, or should be throttled to enforce fairness. Calls to this function must also be enclosed in ieee80211_txq_schedule_{start,end}() calls to ensure proper locking. The API ieee80211_txq_may_transmit() also ensures that TXQ list will be aligned aginst driver's own round-robin scheduler list. i.e it rotates the TXQ list till it makes the requested node becomes the first entry in TXQ list. Thus both the TXQ list and driver's list are in sync. Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Louie Lu <git@louie.lu> [added debugfs write op to reset airtime counter] Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19cfg80211: Add airtime statistics and settingsToke Høiland-Jørgensen
This adds TX airtime statistics to the cfg80211 station dump (to go along with the RX info already present), and adds a new parameter to set the airtime weight of each station. The latter allows userspace to implement policies for different stations by varying their weights. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> [rmanohar@codeaurora.org: fixed checkpatch warnings] Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> [move airtime weight != 0 check into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19mac80211: Add TXQ scheduling APIToke Høiland-Jørgensen
This adds an API to mac80211 to handle scheduling of TXQs. The interface between driver and mac80211 for TXQ handling is changed by adding two new functions: ieee80211_next_txq(), which will return the next TXQ to schedule in the current round-robin rotation, and ieee80211_return_txq(), which the driver uses to indicate that it has finished scheduling a TXQ (which will then be put back in the scheduling rotation if it isn't empty). The driver must call ieee80211_txq_schedule_start() at the start of each scheduling session, and ieee80211_txq_schedule_end() at the end. The API then guarantees that the same TXQ is not returned twice in the same session (so a driver can loop on ieee80211_next_txq() without worrying about breaking the loop. Usage of the new API is optional, so drivers can be ported one at a time. In this patch, the actual scheduling performed by mac80211 is simple round-robin, but a subsequent commit adds airtime fairness awareness to the scheduler. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> [minor kernel-doc fix, propagate sparse locking checks out] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-18devlink: Add health dump {get,clear} commandsEran Ben Elisha
Add devlink health dump commands, in order to run an dump operation over a specific reporter. The supported operations are dump_get in order to get last saved dump (if not exist, dump now) and dump_clear to clear last saved dump. It is expected from driver's callback for diagnose command to fill it via the buffer descriptors API. Devlink will parse it and convert it to netlink nla API in order to pass it to the user. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health diagnose commandEran Ben Elisha
Add devlink health diagnose command, in order to run a diagnose operation over a specific reporter. It is expected from driver's callback for diagnose command to fill it via the buffer descriptors API. Devlink will parse it and convert it to netlink nla API in order to pass it to the user. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health recover commandEran Ben Elisha
Add devlink health recover command to the uapi, in order to allow the user to execute a recover operation over a specific reporter. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health set commandEran Ben Elisha
Add devlink health set command, in order to set configuration parameters for a specific reporter. Supported parameters are: - graceful_period: Time interval between auto recoveries (in msec) - auto_recover: Determines if the devlink shall execute recover upon receiving error for the reporter Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health get commandEran Ben Elisha
Add devlink health get command to provide reporter/s data for user space. Add the ability to get data per reporter or dump data from all available reporters. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health report functionalityEran Ben Elisha
Upon error discover, every driver can report it to the devlink health mechanism via devlink_health_report function, using the appropriate reporter registered to it. Driver can pass error specific context which will be delivered to it as part of the dump / recovery callbacks. Once an error is reported, devlink health will do the following actions: * A log is being send to the kernel trace events buffer * Health status and statistics are being updated for the reporter instance * Object dump is being taken and stored at the reporter instance (as long as there is no other dump which is already stored) * Auto recovery attempt is being done. depends on: - Auto Recovery configuration - Grace period vs. time since last recover Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health reporter create/destroy functionalityEran Ben Elisha
Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used the devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, buffers and status. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health buffer supportEran Ben Elisha
Devlink health buffer is a mechanism to pass descriptors between drivers and devlink. The API allows the driver to add objects, object pair, value array (nested attributes), value and name. Driver can use this API to fill the buffers in a format which can be translated by the devlink to the netlink message. In order to fulfill it, an internal buffer descriptor is defined. This will hold the data and metadata per each attribute and by used to pass actual commands to the netlink. This mechanism will be later used in devlink health for dump and diagnose data store by the drivers. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net_sched: add hit counter for matchallCong Wang
Although matchall always matches packets, however, it still relies on a protocol match first. So it is still useful to have such a counter for matchall. Of course, unlike u32, every time we hit a matchall filter, it is always a success, so we don't have to distinguish them. Sample output: filter protocol 802.1Q pref 100 matchall chain 0 filter protocol 802.1Q pref 100 matchall chain 0 handle 0x1 not_in_hw (rule hit 10) action order 1: vlan pop continue index 1 ref 1 bind 1 installed 40 sec used 1 sec Action statistics: Sent 836 bytes 10 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Reported-by: Martin Olsson <martin.olsson+netdev@sentorsecurity.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: remove phy_stop_interruptsHeiner Kallweit
Interrupts have been disabled in phy_stop() already. So we can remove phy_stop_interrupts() and free the interrupt in phy_disconnect() directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: Fix usage of pskb_trim_rcsumRoss Lagerwall
In certain cases, pskb_trim_rcsum() may change skb pointers. Reinitialize header pointers afterwards to avoid potential use-after-frees. Add a note in the documentation of pskb_trim_rcsum(). Found by KASAN. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18tcp: declare tcp_mmap() only when CONFIG_MMU is setYafang Shao
Since tcp_mmap() is defined when CONFIG_MMU is set. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: remove state PHY_CHANGELINKHeiner Kallweit
Since recent changes to the phylib state machine state PHY_CHANGELINK isn't used any longer. Therefore let's remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19Merge tag 'fbdev-v5.0-rc3' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev fixes from Bartlomiej Zolnierkiewicz: - fix stack memory leak in omap2fb driver (Vlad Tsyrklevich) - fix OF node name handling v4.20 regression in offb driver (Rob Herring) - convert CONFIG_FB_LOGO_CENTER config option added in v5.0-rc1 into a kernel parameter (Peter Rosin) * tag 'fbdev-v5.0-rc3' of git://github.com/bzolnier/linux: fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd line option fbdev: offb: Fix OF node name handling omap2fb: Fix stack memory disclosure
2019-01-18Revert "netfilter: nft_hash: add map lookups for hashing operations"Laura Garcia Liebana
A better way to implement this from userspace has been found without specific code in the kernel side, revert this. Fixes: b9ccc07e3f31 ("netfilter: nft_hash: add map lookups for hashing operations") Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: nat: un-export nf_nat_used_tupleFlorian Westphal
Not used since 203f2e78200c27e ("netfilter: nat: remove l4proto->unique_tuple") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: nft_meta: Add NFT_META_I/OIFKIND meta typewenxu
In the ip_rcv the skb goes through the PREROUTING hook first, then kicks in vrf device and go through the same hook again. When conntrack dnat works with vrf, there will be some conflict with rules because the packet goes through the hook twice with different nf status. ip link add user1 type vrf table 1 ip link add user2 type vrf table 2 ip l set dev tun1 master user1 ip l set dev tun2 master user2 nft add table firewall nft add chain firewall zones { type filter hook prerouting priority - 300 \; } nft add rule firewall zones counter ct zone set iif map { "tun1" : 1, "tun2" : 2 } nft add chain firewall rule-1000-ingress nft add rule firewall rule-1000-ingress ct zone 1 tcp dport 22 ct state new counter accept nft add rule firewall rule-1000-ingress counter drop nft add chain firewall rule-1000-egress nft add rule firewall rule-1000-egress tcp dport 22 ct state new counter drop nft add rule firewall rule-1000-egress counter accept nft add chain firewall rules-all { type filter hook prerouting priority - 150 \; } nft add rule firewall rules-all ip daddr vmap { "2.2.2.11" : jump rule-1000-ingress } nft add rule firewall rules-all ct zone vmap { 1 : jump rule-1000-egress } nft add rule firewall dnat-all ct zone vmap { 1 : jump dnat-1000 } nft add rule firewall dnat-1000 ip daddr 2.2.2.11 counter dnat to 10.0.0.7 For a package with ip daddr 2.2.2.11 and tcp dport 22, first time accept in the rule-1000-ingress and dnat to 10.0.0.7. Then second time the packet goto the wrong chain rule-1000-egress which leads the packet drop With this patch, userspace can add the 'don't re-do entire ruleset for vrf' policy itself via: nft add rule firewall rules-all meta iifkind "vrf" counter accept Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18Merge tag 'asoc-fix-v5.0-rc2' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.0 Quite a big batch of fixes here. There's a couple of things going on, the main one is that we found some issues with not deferring probe when we should, causing us to skip some driver initialization. The fixes for this then in turn exposed some issues with how we were searching for components which had previously gone unnoticed due to the original issue. There's also been the normal driver specific stuff and there's been what looks like several batches of automated scanning for issues which have generated quite a large set of smaller fixes for potential crashes and missed error handling.
2019-01-18netfilter: conntrack: remove nf_ct_l4proto_find_getFlorian Westphal
Its now same as __nf_ct_l4proto_find(), so rename that to nf_ct_l4proto_find and use it everywhere. It never returns NULL and doesn't need locks or reference counts. Before this series: 302824 net/netfilter/nf_conntrack.ko 21504 net/netfilter/nf_conntrack_proto_gre.ko text data bss dec hex filename 6281 1732 4 8017 1f51 nf_conntrack_proto_gre.ko 108356 20613 236 129205 1f8b5 nf_conntrack.ko After: 294864 net/netfilter/nf_conntrack.ko text data bss dec hex filename 106979 19557 240 126776 1ef38 nf_conntrack.ko so, even with builtin gre, total size got reduced. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove l4proto destroy hookFlorian Westphal
Only one user (gre), add a direct call and remove this facility. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove l4proto init and get_net callbacksFlorian Westphal
Those were needed we still had modular trackers. As we don't have those anymore, prefer direct calls and remove all the (un)register infrastructure associated with this. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove sysctl registration helpersFlorian Westphal
After previous patch these are not used anymore. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: avoid unneeded nf_conntrack_l4proto lookupsFlorian Westphal
after removal of the packet and invert function pointers, several places do not need to lookup the l4proto structure anymore. Remove those lookups. The function nf_ct_invert_tuplepr becomes redundant, replace it with nf_ct_invert_tuple everywhere. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove pernet l4 proto register interfaceFlorian Westphal
No used anymore. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove remaining l4proto indirect packet callsFlorian Westphal
Now that all l4trackers are builtin, no need to use a mix of direct and indirect calls. This removes the last two users: gre and the generic l4 protocol tracker. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove module owner fieldFlorian Westphal
No need to get/put module owner reference, none of these can be removed anymore. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove invert_tuple callbackFlorian Westphal
Only used by icmp(v6). Prefer a direct call and remove this function from the l4proto struct. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove pkt_to_tuple callbackFlorian Westphal
GRE is now builtin, so we can handle it via direct call and remove the callback. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: remove net_idFlorian Westphal
No users anymore. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: gre: switch module to be built-inFlorian Westphal
This makes the last of the modular l4 trackers 'bool'. After this, all infrastructure to handle dynamic l4 protocol registration becomes obsolete and can be removed in followup patches. Old: 302824 net/netfilter/nf_conntrack.ko 21504 net/netfilter/nf_conntrack_proto_gre.ko New: 313728 net/netfilter/nf_conntrack.ko Old: text data bss dec hex filename 6281 1732 4 8017 1f51 nf_conntrack_proto_gre.ko 108356 20613 236 129205 1f8b5 nf_conntrack.ko New: 112095 21381 240 133716 20a54 nf_conntrack.ko The size increase is only temporary. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: gre: convert rwlock to rcuFlorian Westphal
We can use gre. Lock is only needed when a new expectation is added. In case a single spinlock proves to be problematic we can either add one per netns or use an array of locks combined with net_hash_mix() or similar to pick the 'correct' one. But given this is only needed for an expectation rather than per packet a single one should be ok. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: handle icmp pkt_to_tuple helper via direct callsFlorian Westphal
rather than handling them via indirect call, use a direct one instead. This leaves GRE as the last user of this indirect call facility. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: handle builtin l4proto packet functions via direct callsFlorian Westphal
The l4 protocol trackers are invoked via indirect call: l4proto->packet(). With one exception (gre), all l4trackers are builtin, so we can make .packet optional and use a direct call for most protocols. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: nf_tables: Support RULE_ID reference in new rulePhil Sutter
To allow for a batch to contain rules in arbitrary ordering, introduce NFTA_RULE_POSITION_ID attribute which works just like NFTA_RULE_POSITION but contains the ID of another rule within the same batch. This helps iptables-nft-restore handling dumps with mixed insert/append commands correctly. Note that NFTA_RULE_POSITION takes precedence over NFTA_RULE_POSITION_ID, so if the former is present, the latter is ignored. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: physdev: relax br_netfilter dependencyFlorian Westphal
Following command: iptables -D FORWARD -m physdev ... causes connectivity loss in some setups. Reason is that iptables userspace will probe kernel for the module revision of the physdev patch, and physdev has an artificial dependency on br_netfilter (xt_physdev use makes no sense unless a br_netfilter module is loaded). This causes the "phydev" module to be loaded, which in turn enables the "call-iptables" infrastructure. bridged packets might then get dropped by the iptables ruleset. The better fix would be to change the "call-iptables" defaults to 0 and enforce explicit setting to 1, but that breaks backwards compatibility. This does the next best thing: add a request_module call to checkentry. This was a stray '-D ... -m physdev' won't activate br_netfilter anymore. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit (git 2.34.1) at 2025-09-13 13:36:13 +0000