| Age | Commit message (Collapse) | Author |
|---|
|
To prepare removing the global routing_ioctl hack start lifting the code
into the ipv4 and appletalk ->compat_ioctl handlers. Unlike the existing
handler we don't bother copying in the name - there are no compat issues for
char arrays.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To prepare removing the global routing_ioctl hack start lifting the code
into a newly added ipv6 ->compat_ioctl handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prepare for better compat ioctl handling by moving the user copy out
of ipv6_route_ioctl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a new action is installed, firstuse field of 'tcf_t' is explicitly set
to 0. Value of zero means "new action, not yet used"; as a packet hits the
action, 'firstuse' is stamped with the current jiffies value.
tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.
Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function was introduced to allow for different handling of
link up and link down events particularly with regard to the
netif_carrier. The third argument do_carrier allowed the flag to
be left unchanged.
Since then the phylink has introduced an implementation that
completely ignores the third parameter since it never wants to
change the flag and the phylib always sets the third parameter
to true so the flag is always changed.
Therefore the third argument (i.e. do_carrier) is no longer
necessary and can be removed. This also means that the phylib
phy_link_down() function no longer needs its second argument.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Rockchip dtsi and dts files have been bulk-converted for the
remaining raw gpio numbers into their descriptive counterparts and
also got rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings, so remove the unused defines in 'rockchip.h' to prevent
that someone start using them again.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200512203524.7317-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
We want to enable kgdb to debug the early parts of the kernel.
Unfortunately kgdb normally is a client of the tty API in the kernel
and serial drivers don't register to the tty layer until fairly late
in the boot process.
Serial drivers do, however, commonly register a boot console. Let's
enable the kgdboc driver to work with boot consoles to provide early
debugging.
This change co-opts the existing read() function pointer that's part
of "struct console". It's assumed that if a boot console (with the
flag CON_BOOT) has implemented read() that both the read() and write()
function are polling functions. That means they work without
interrupts and read() will return immediately (with 0 bytes read) if
there's nothing to read. This should be a safe assumption since it
appears that no current boot consoles implement read() right now and
there seems no reason to do so unless they wanted to support
"kgdboc_earlycon".
The normal/expected way to make all this work is to use
"kgdboc_earlycon" and "kgdboc" together. You should point them both
to the same physical serial connection. At boot time, as the system
transitions from the boot console to the normal console (and registers
a tty), kgdb will switch over.
One awkward part of all this, though, is that there can be a window
where the boot console goes away and we can't quite transtion over to
the main kgdboc that uses the tty layer. There are two main problems:
1. The act of registering the tty doesn't cause any call into kgdboc
so there is a window of time when the tty is there but kgdboc's
init code hasn't been called so we can't transition to it.
2. On some serial drivers the normal console inits (and replaces the
boot console) quite early in the system. Presumably these drivers
were coded up before earlycon worked as well as it does today and
probably they don't need to do this anymore, but it causes us
problems nontheless.
Problem #1 is not too big of a deal somewhat due to the luck of probe
ordering. kgdboc is last in the tty/serial/Makefile so its probe gets
right after all other tty devices. It's not fun to rely on this, but
it does work for the most part.
Problem #2 is a big deal, but only for some serial drivers. Other
serial drivers end up registering the console (which gets rid of the
boot console) and tty at nearly the same time.
The way we'll deal with the window when the system has stopped using
the boot console and the time when we're setup using the tty is to
keep using the boot console. This may sound surprising, but it has
been found to work well in practice. If it doesn't work, it shouldn't
be too hard for a given serial driver to make it keep working.
Specifically, it's expected that the read()/write() function provided
in the boot console should be the same (or nearly the same) as the
normal kgdb polling functions. That means continuing to use them
should work just fine. To make things even more likely to work work
we'll also trap the recently added exit() function in the boot console
we're using and delay any calls to it until we're all done with the
boot console.
NOTE: there could be ways to use all this in weird / unexpected ways.
If you do something like this, it's a bit of a buyer beware situation.
Specifically:
- If you specify only "kgdboc_earlycon" but not "kgdboc" then
(depending on your serial driver) things will probably work OK, but
you'll get a warning printed the first time you use kgdb after the
boot console is gone. You'd only be able to do this, of course, if
the serial driver you're running atop provided an early boot console.
- If your "kgdboc_earlycon" and "kgdboc" devices are not the same
device things should work OK, but it'll be your job to switch over
which device you're monitoring (including figuring out how to switch
over gdb in-flight if you're using it).
When trying to enable "kgdboc_earlycon" it should be noted that the
names that are registered through the boot console layer and the tty
layer are not the same for the same port. For example when debugging
on one board I'd need to pass "kgdboc_earlycon=qcom_geni
kgdboc=ttyMSM0" to enable things properly. Since digging up the boot
console name is a pain and there will rarely be more than one boot
console enabled, you can provide the "kgdboc_earlycon" parameter
without specifying the name of the boot console. In this case we'll
just pick the first boot that implements read() that we find.
This new "kgdboc_earlycon" parameter should be contrasted to the
existing "ekgdboc" parameter. While both provide a way to debug very
early, the usage and mechanisms are quite different. Specifically
"kgdboc_earlycon" is meant to be used in tandem with "kgdboc" and
there is a transition from one to the other. The "ekgdboc" parameter,
on the other hand, replaces the "kgdboc" parameter. It runs the same
logic as the "kgdboc" parameter but just relies on your TTY driver
being present super early. The only known usage of the old "ekgdboc"
parameter is documented as "ekgdboc=kbd earlyprintk=vga". It should
be noted that "kbd" has special treatment allowing it to init early as
a tty device.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.8.I8fba5961bf452ab92350654aa61957f23ecf0100@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
Defining static shadow call stacks is not architecture-specific, so move
the DEFINE_SCS() macro into the core header file.
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There is nothing architecture-specific about scs_overflow_check() as
it's just a trivial wrapper around scs_corrupted().
For parity with task_stack_end_corrupted(), rename scs_corrupted() to
task_scs_end_corrupted() and call it from schedule_debug() when
CONFIG_SCHED_STACK_END_CHECK_is enabled, which better reflects its
purpose as a debug feature to catch inadvertent overflow of the SCS.
Finally, remove the unused scs_overflow_check() function entirely.
This has absolutely no impact on architectures that do not support SCS
(currently arm64 only).
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Storing the SCS information in thread_info as a {base,offset} pair
introduces an additional load instruction on the ret-to-user path,
since the SCS stack pointer in x18 has to be converted back to an offset
by subtracting the base.
Replace the offset with the absolute SCS stack pointer value instead
and avoid the redundant load.
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This
1) Enables core DRM syncobj support.
2) Adds options to the submission ioctl to wait/signal syncobjs.
Just like the wait fence fd, this does inline waits. Using the
scheduler would be nice but I believe it is out of scope for
this work.
Support for timeline syncobjs is implemented and the interface
is ready for it, but I'm not enabling it yet until there is
some code for turnip to use it.
The reset is mostly in there because in the presence of waiting
and signalling the same semaphores, resetting them after
signalling can become very annoying.
v2:
- Fixed style issues
- Removed a cleanup issue in a failure case
- Moved to a copy_from_user per syncobj
v3:
- Fixed a missing declaration introduced in v2
- Reworked to use ERR_PTR/PTR_ERR
- Simplified failure gotos.
Used by: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2769
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Only mlx5_core driver handles fw initialization check and command
interface revision check.
Hence move them inside the mlx5_core driver where it is used.
This avoid exposing these helpers to all mlx5 drivers.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Remove the "metadata_reg_b" field and all uses of this field in code
to match the device specification. As this field is not in use in SW
steering it is safe to remove it.
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
<kai.vehmanen@linux.intel.com>:
Hi,
here's a series of minor fixes and improvements to SOF. Add support
for smart amplifier component type. Cover more systems by relaxing
match rules for the generic Soundwire machine driver. Fix issues with
driver unload and address a few compiler warnings.
Daniel Baluta (2):
ASoC: SOF: Do nothing when DSP PM callbacks are not set
ASoC: SOF: define INFO_ flags in dsp_ops
Keyon Jie (1):
ASoC: SOF: topology: add support to smart amplifier
Marcin Rajwa (2):
ASoC: SOF: add a power_down_notify method
ASoC: SOF: inform DSP that driver is going to be removed
Pierre-Louis Bossart (2):
ASoC: SOF: imx: make dsp_ops static
ASoC: SOF: imx: make imx8m_dsp_ops static
randerwang (1):
ASoC: SOF: Intel: sdw: relax sdw machine select constraints
include/sound/sof/topology.h | 2 ++
sound/soc/sof/core.c | 6 ++++++
sound/soc/sof/imx/imx8.c | 2 +-
sound/soc/sof/imx/imx8m.c | 8 +++++++-
sound/soc/sof/intel/hda.c | 10 +++++++++-
sound/soc/sof/pm.c | 19 +++++++++++++++++--
sound/soc/sof/sof-priv.h | 1 +
sound/soc/sof/topology.c | 1 +
8 files changed, 44 insertions(+), 5 deletions(-)
--
2.26.0
|
|
When this flag is set in the CS IB flags, it causes
a memory cache flush of the GFX.
v2:
Move new flag to drm_amdgpu_cs_chunk_ib.flags
Bump up UAPI version
Remove condition on job != null to emit mem_sync
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No one is using dai->active, snd_soc_component_is_active().
Let's remove these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87imgy58hp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874ksi6n48.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zcy6n4d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current snd_soc_dai_action() is updating
dai->stream_active for Playback/Capture (A),
dai->active for DAI (B)
void snd_soc_dai_action(struct snd_soc_dai *dai,
int stream, int action)
{
(A) dai->stream_active[stream] += action;
(B) dai->active += action;
dai->component->active += action;
}
But, these are very verbose, because we can calculate
DAI active from stream_active.
This patch adds snd_soc_dai_active() which calculate
DAI active from DAI stream_active.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877dxe6n4i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_runtime_action() updates DAI's xxx_active.
We should update these in the same time, and
it can be implemented at soc-dai.c.
This patch adds snd_soc_dai_action() for it.
This is prepare for xxx_active cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a72a6n4s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_runtime_activate()/deactivate() are implemented by global function
which are just calling snd_soc_runtime_action().
We can replace it to macro, and this patch do it.
This patch is prepare for xxx_active cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87blmq6n4y.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor: svc_recvfrom() is going to be converted to read into
bio_vecs in a moment. Unhook the only other caller,
svc_tcp_recv_record(), which just wants to read the 4-byte stream
record marker into a kvec.
While we're in the area, streamline this helper by straight-lining
the hot path, replace dprintk call sites with tracepoints, and
reduce the number of atomic bit operations in this path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up. I find the name of the svc_sock::sk_reclen field
confusing, so I've changed it to better reflect its function. This
field is not read directly to get the record length. Rather, it is
a buffer containing a record marker that needs to be decoded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Report TCP socket state changes and accept failures via
tracepoints, replacing dprintk() call sites.
No tracepoint is added in svc_tcp_listen_data_ready. There's
no information available there that isn't also reported by the
svcsock_new_socket and the accept failure tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In addition to tracing recently-updated socket sendto events, this
commit adds a trace event class that can be used for additional
svcsock-related tracepoints in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In lieu of dprintks or tracepoints in each individual transport
implementation, introduce tracepoints in the generic part of the RPC
layer. These typically fire for connection lifetime events, so
shouldn't contribute a lot of noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Capture transport creation failures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: The xprt=%p was meant to distinguish events from different
transports, but the addr=%s does that just as well and does not
expose kernel memory addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Failure to accept a connection is typically due to a problem
specific to a transport type. Also, ->xpo_accept returns NULL
on error rather than reporting a specific problem.
So, add failure-specific tracepoints in svc_rdma_accept().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Commit d21b05f101ae ("rdma: SVCRMDA Header File")
introduced the SVCRDMA_DEBUG macro, but it doesn't seem to have been
used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Use a consistent naming convention so that these trace
points can be enabled quickly via a glob.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Way back when I was writing the RPC/RDMA server-side backchannel
code, I misread the TCP backchannel reply handler logic. When
svc_tcp_recvfrom() successfully receives a backchannel reply, it
does not return -EAGAIN. It sets XPT_DATA and returns zero.
Update svc_rdma_recvfrom() to return zero. Here, XPT_DATA doesn't
need to be set again: it is set whenever a new message is received,
behind a spin lock in a single threaded context.
Also, if handling the cb reply is not successful, the message is
simply dropped. There's no special message framing to deal with as
there is in the TCP case.
Now that the handle_bc_reply() return value is ignored, I've removed
the dprintk call sites in the error exit of handle_bc_reply() in
favor of trace points in other areas that already report the error
cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Replace a dprintk call site.
This is the last remaining dprintk call site in svc_rdma_rw.c, so
remove dprintk infrastructure as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Replace a dprintk call site with a tracepoint.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Replace two dprintk call sites with a tracepoint.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
- De-duplicate code
- Rename the tracepoint with "_err" to allow enabling via glob
- Report the sg_cnt for the failing rw_ctx
- Fix a dumb signage issue
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It appears that the RPC/RDMA transport does not need serialization
of calls to its xpo_sendto method. Move the mutex into the socket
methods that still need that serialization.
Tail latencies are unambiguously better with this patch applied.
fio randrw 8KB 70/30 on NFSv3, smaller numbers are better:
clat percentiles (usec):
With xpt_mutex:
r | 99.99th=[ 8848]
w | 99.99th=[ 9634]
Without xpt_mutex:
r | 99.99th=[ 8586]
w | 99.99th=[ 8979]
Serializing the construction of RPC/RDMA transport headers is not
really necessary at this point, because the Linux NFS server
implementation never changes its credit grant on a connection. If
that should change, then svc_rdma_sendto will need to serialize
access to the transport's credit grant fields.
Reported-by: kbuild test robot <lkp@intel.com>
[ cel: fix uninitialized variable warning ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Move private definitions from header to phy-omap-usb2.c file.
Get rid of unused data structures usb_dpll_params and omap_usb_phy_type.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200515080518.26870-2-rogerq@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
When a PASID is stopped or terminated, there can be pending PRQs
(requests that haven't received responses) in remapping hardware.
This adds the interface to drain page requests and call it when a
PASID is terminated.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-16-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Current qi_submit_sync() only supports single invalidation descriptor
per submission and appends wait descriptor after each submission to
poll the hardware completion. This extends the qi_submit_sync() helper
to support multiple descriptors, and add an option so that the caller
could specify the Page-request Drain (PD) bit in the wait descriptor.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-13-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This patch is an initial step to replace Intel SVM code with the
following IOMMU SVA ops:
intel_svm_bind_mm() => iommu_sva_bind_device()
intel_svm_unbind_mm() => iommu_sva_unbind_device()
intel_svm_is_pasid_valid() => iommu_sva_get_pasid()
The features below will continue to work but are not included in this patch
in that they are handled mostly within the IOMMU subsystem.
- IO page fault
- mmu notifier
Consolidation of the above will come after merging generic IOMMU sva
code[1]. There should not be any changes needed for SVA users such as
accelerator device drivers during this time.
[1] http://jpbrucker.net/sva/
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add a get_domain_info() helper to retrieve the valid per-device
iommu private data.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When VT-d driver runs in the guest, PASID allocation must be
performed via virtual command interface. This patch registers a
custom IOASID allocator which takes precedence over the default
XArray based allocator. The resulting IOASID allocation will always
come from the host. This ensures that PASID namespace is system-
wide.
Virtual command registers are used in the guest only, to prevent
vmexit cost, we cache the capability and store it during initialization.
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Enabling IOMMU in a guest requires communication with the host
driver for certain aspects. Use of PASID ID to enable Shared Virtual
Addressing (SVA) requires managing PASID's in the host. VT-d 3.0 spec
provides a Virtual Command Register (VCMD) to facilitate this.
Writes to this register in the guest are trapped by vIOMMU which
proxies the call to the host driver.
This virtual command interface consists of a capability register,
a virtual command register, and a virtual response register. Refer
to section 10.4.42, 10.4.43, 10.4.44 for more information.
This patch adds the enlightened PASID allocation/free interfaces
via the virtual command interface.
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When Shared Virtual Memory is exposed to a guest via vIOMMU, scalable
IOTLB invalidation may be passed down from outside IOMMU subsystems.
This patch adds invalidation functions that can be used for additional
translation cache types.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When supporting guest SVA with emulated IOMMU, the guest PASID
table is shadowed in VMM. Updates to guest vIOMMU PASID table
will result in PASID cache flush which will be passed down to
the host as bind guest PASID calls.
For the SL page tables, it will be harvested from device's
default domain (request w/o PASID), or aux domain in case of
mediated device.
.-------------. .---------------------------.
| vIOMMU | | Guest process CR3, FL only|
| | '---------------------------'
.----------------/
| PASID Entry |--- PASID cache flush -
'-------------' |
| | V
| | CR3 in GPA
'-------------'
Guest
------| Shadow |--------------------------|--------
v v v
Host
.-------------. .----------------------.
| pIOMMU | | Bind FL for GVA-GPA |
| | '----------------------'
.----------------/ |
| PASID Entry | V (Nested xlate)
'----------------\.------------------------------.
| | |SL for GPA-HPA, default domain|
| | '------------------------------'
'-------------'
Where:
- FL = First level/stage one page tables
- SL = Second level/stage two page tables
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Nested translation mode is supported in VT-d 3.0 Spec.CH 3.8.
With PASID granular translation type set to 0x11b, translation
result from the first level(FL) also subject to a second level(SL)
page table translation. This mode is used for SVA virtualization,
where FL performs guest virtual to guest physical translation and
SL performs guest physical to host physical translation.
This patch adds a helper function for setting up nested translation
where second level comes from a domain and first level comes from
a guest PGD.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Move domain helper to header to be used by SVA code.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add an helper function to v4l2-ctrls to register controls associated
with a device property.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
