summaryrefslogtreecommitdiff
path: root/kernel/time
AgeCommit message (Collapse)Author
2017-06-20Merge branch 'WIP.sched/core' into sched/coreIngo Molnar
Conflicts: kernel/sched/Makefile Pick up the waitqueue related renames - it didn't get much feedback, so it appears to be uncontroversial. Famous last words? ;-) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accountingJohn Stultz
Due to how the MONOTONIC_RAW accumulation logic was handled, there is the potential for a 1ns discontinuity when we do accumulations. This small discontinuity has for the most part gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW in their vDSO clock_gettime implementation, we've seen failures with the inconsistency-check test in kselftest. This patch addresses the issue by using the same sub-ns accumulation handling that CLOCK_MONOTONIC uses, which avoids the issue for in-kernel users. Since the ARM64 vDSO implementation has its own clock_gettime calculation logic, this patch reduces the frequency of errors, but failures are still seen. The ARM64 vDSO will need to be updated to include the sub-nanosecond xtime_nsec values in its calculation for this issue to be completely fixed. Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Daniel Mentz <danielmentz@google.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: "stable #4 . 8+" <stable@vger.kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-20time: Fix clock->read(clock) race around clocksource changesJohn Stultz
In tests, which excercise switching of clocksources, a NULL pointer dereference can be observed on AMR64 platforms in the clocksource read() function: u64 clocksource_mmio_readl_down(struct clocksource *c) { return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask; } This is called from the core timekeeping code via: cycle_now = tkr->read(tkr->clock); tkr->read is the cached tkr->clock->read() function pointer. When the clocksource is changed then tkr->clock and tkr->read are updated sequentially. The code above results in a sequential load operation of tkr->read and tkr->clock as well. If the store to tkr->clock hits between the loads of tkr->read and tkr->clock, then the old read() function is called with the new clock pointer. As a consequence the read() function dereferences a different data structure and the resulting 'reg' pointer can point anywhere including NULL. This problem was introduced when the timekeeping code was switched over to use struct tk_read_base. Before that, it was theoretically possible as well when the compiler decided to reload clock in the code sequence: now = tk->clock->read(tk->clock); Add a helper function which avoids the issue by reading tk_read_base->clock once into a local variable clk and then issue the read function via clk->read(clk). This guarantees that the read() function always gets the proper clocksource pointer handed in. Since there is now no use for the tkr.read pointer, this patch also removes it, and to address stopping the fast timekeeper during suspend/resume, it introduces a dummy clocksource to use rather then just a dummy read function. Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: stable <stable@vger.kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Daniel Mentz <danielmentz@google.com> Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-14posix-timers: Make nanosleep timespec argument constThomas Gleixner
No nanosleep implementation modifies the rqtp argument. Mark is const. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org>
2017-06-14posix-cpu-timers: Avoid timespec conversion in do_cpu_nanosleep()Thomas Gleixner
No point in converting the expiry time back and forth. No point either to update the value in the caller supplied variable. mark the rqtp argument const. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org>
2017-06-14time: Move compat_gettimeofday()/settimeofday() to nativeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-16-viro@ZenIV.linux.org.uk
2017-06-14time: Move compat_time()/stime() to nativeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-15-viro@ZenIV.linux.org.uk
2017-06-14posix-timers: Move compat_timer_create() to native, get rid of set_fs()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-14-viro@ZenIV.linux.org.uk
2017-06-14posix-timers: Move compat versions of clock_gettime/settime/getresAl Viro
Move them to the native implementations and get rid of the set_fs() hackery. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-13-viro@ZenIV.linux.org.uk
2017-06-14itimers: Move compat itimer syscalls to native onesAl Viro
get rid of set_fs(), sanitize compat copyin/copyout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-12-viro@ZenIV.linux.org.uk
2017-06-14posix-timers: Take compat timer_gettime(2) to native oneAl Viro
... and get rid of set_fs() in there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-11-viro@ZenIV.linux.org.uk
2017-06-14posix-timers: Take compat timer_settime(2) to native oneAl Viro
... and get rid of set_fs() in there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-10-viro@ZenIV.linux.org.uk
2017-06-14ntp: Move adjtimex related compat syscalls to native counterpartsAl Viro
Get rid of set_fs() mess and sanitize compat_{get,put}_timex(), while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-9-viro@ZenIV.linux.org.uk
2017-06-14posix-timers: Kill ->nsleep_restart()Al Viro
No more users. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-8-viro@ZenIV.linux.org.uk
2017-06-14hrtimers/posix-timers: Merge nanosleep timespec copyout logics into a new helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-7-viro@ZenIV.linux.org.uk
2017-06-14time/posix-timers: Move the compat copyouts to the nanosleep implementationsAl Viro
Turn restart_block.nanosleep.{rmtp,compat_rmtp} into a tagged union (kind = 1 -> native, kind = 2 -> compat, kind = 0 -> nothing) and make the places doing actual copyout handle compat as well as native (that will become a helper in the next commit). Result: compat wrappers, messing with reassignments, etc. are gone. [ tglx: Folded in a variant of Peter Zijlstras enum patch ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-6-viro@ZenIV.linux.org.uk
2017-06-14posix-timers: Store rmtp into restart_block in sys_clock_nanosleep()Al Viro
... instead of doing that in every ->nsleep() instance Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-5-viro@ZenIV.linux.org.uk
2017-06-14hrtimer: Move copyout of remaining time to do_nanosleep()Al Viro
The hrtimer nanosleep() implementation can be simplified by moving the copy out of the remaining time to do_nanosleep() which is shared between the real nanosleep function and the restart function. The pointer to the timespec64 which is updated is already stored in the restart block at the call site, so the seperate handling of nanosleep and restart function can be avoided. [ tglx: Added changelog ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-4-viro@ZenIV.linux.org.uk
2017-06-14hrtimer_nanosleep(): Pass rmtp in restart_blockAl Viro
Store the pointer to the timespec which gets updated with the remaining time in the restart block and remove the function argument. [ tglx: Added changelog ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-3-viro@ZenIV.linux.org.uk
2017-06-14alarmtimer: Move copyout and freeze handling into alarmtimer_do_nsleep()Al Viro
The alarmtimer nanosleep() implementation can be simplified by moving the copy out of the remaining time to alarmtimer_do_nsleep() which is shared between the real nanosleep function and the restart function. The pointer to the timespec64 which is updated has to be stored in the restart block anyway. Instead of storing it only in the restart case, store it before calling alarmtimer_do_nsleep() and copy the remaining time in the signal exit path. [ tglx: Added changelog ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-2-viro@ZenIV.linux.org.uk
2017-06-14posix-cpu-timers: Move copyout of timespec into do_cpu_nanosleep()Al Viro
The posix-cpu-timer nanosleep() implementation can be simplified by moving the copy out of the remaining time to do_cpu_nanosleep() which is shared between the real nanosleep function and the restart function. The pointer to the timespec64 which is updated has to be stored in the restart block anyway. Instead of storing it only in the restart case, store it before calling do_cpu_nanosleep() and copy the remaining time in the signal exit path. [ tglx: Added changelog ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170607084241.28657-1-viro@ZenIV.linux.org.uk
2017-06-13nohz: Fix spurious warning when hrtimer and clockevent get out of syncFrederic Weisbecker
The sanity check ensuring that the tick expiry cache (ts->next_tick) is actually in sync with the hardware clock (dev->next_event) makes the wrong assumption that the clock can't be programmed later than the hrtimer deadline. In fact the clock hardware can be programmed later on some conditions such as: * The hrtimer deadline is already in the past. * The hrtimer deadline is earlier than the minimum delay supported by the hardware. Such conditions can be met when we program the tick, for example if the last jiffies update hasn't been seen by the current CPU yet, we may program the hrtimer to a deadline that is earlier than ktime_get() because last_jiffies_update is our timestamp base to compute the next tick. As a result, we can randomly observe such warning: WARNING: CPU: 5 PID: 0 at kernel/time/tick-sched.c:794 tick_nohz_stop_sched_tick kernel/time/tick-sched.c:791 [inline] Call Trace: tick_nohz_irq_exit tick_irq_exit irq_exit exiting_irq smp_call_function_interrupt smp_call_function_single_interrupt call_function_single_interrupt Therefore, let's rather make sure that the tick expiry cache is sync'ed with the tick hrtimer deadline, against which it is not supposed to drift away. The clock hardware instead has its own will and can't be used as a reliable comparison point. Reported-and-tested-by: Sasha Levin <alexander.levin@verizon.com> Reported-and-tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: James Hartsock <hartsjc@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Wright <tim@binbash.co.uk> Link: http://lkml.kernel.org/r/1497326654-14122-1-git-send-email-fweisbec@gmail.com [ Minor readability edit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-12posix-timers: Handle relative posix-timers correctlyThomas Gleixner
The recent rework of the posix timer internals broke the magic posix mechanism, which requires that relative timers are not affected by modifications of the underlying clock. That means relative CLOCK_REALTIME timers cannot use CLOCK_REALTIME, because that can be set and adjusted. The underlying hrtimer switches the clock for these timers to CLOCK_MONOTONIC. That still works, but reading the remaining time of such a timer has been broken in the rework. The old code used the hrtimer internals directly and avoided the posix clock callbacks. Now common_timer_get() uses the underlying kclock->timer_get() callback, which is still CLOCK_REALTIME based. So the remaining time of such a timer is calculated against the wrong time base. Handle it by switching the k_itimer->kclock pointer according to the resulting hrtimer mode. k_itimer->it_clock still contains CLOCK_REALTIME because the timer might be set with ABSTIME later and then it needs to switch back to the realtime posix clock implementation. Fixes: eae1c4ae275f ("posix-timers: Make use of cancel/arm callbacks") Reported-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Link: http://lkml.kernel.org/r/20170609201156.GB21491@outlook.office365.com
2017-06-12posix-timers: Zero out oldval itimerspecThomas Gleixner
The recent posix timer rework moved the clearing of the itimerspec to the real syscall implementation, but forgot that the kclock->timer_get() is used by timer_settime() as well. That results in an uninitialized variable and bogus values returned to user space. Add the missing memset to timer_settime(). Fixes: eabdec043853 ("posix-timers: Zero settings value in common code") Reported-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Link: http://lkml.kernel.org/r/20170609201156.GB21491@outlook.office365.com
2017-06-12tick/broadcast: Make tick_broadcast_setup_oneshot() staticStephen Boyd
This function isn't used outside of tick-broadcast.c, so let's mark it static. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Link: http://lkml.kernel.org/r/20170608063603.13276-1-sboyd@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-12posix-timers: Fix inverted SIGEV_NONE logic in common_timer_get()Thomas Gleixner
The refactoring of the posix-timer core to allow better code sharing introduced inverted logic vs. SIGEV_NONE timers in common_timer_get(). That causes hrtimer_forward() to be called on active timers, which rightfully triggers the warning hrtimer_forward(). Make sig_none what it says: signal mode == SIGEV_NONE. Fixes: 91d57bae0868 ("posix-timers: Make use of forward/remaining callbacks") Reported-by: Ye Xiaolong <xiaolong.ye@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170609104457.GA39907@inn.lkp.intel.com
2017-06-08rcu: Remove nohz_full full-system-idle state machinePaul E. McKenney
The NO_HZ_FULL_SYSIDLE full-system-idle capability was added in 2013 by commit 0edd1b1784cb ("nohz_full: Add full-system-idle state machine"), but has not been used. This commit therefore removes it. If it turns out to be needed later, this commit can always be reverted. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-05nohz: Fix buggy tick delay on IRQ stormsFrederic Weisbecker
When the tick is stopped and we reach the dynticks evaluation code on IRQ exit, we perform a soft tick restart if we observe an expired timer from there. It means we program the nearest possible tick but we stay in dynticks mode (ts->tick_stopped = 1) because we may need to stop the tick again after that expired timer is handled. Now this solution works most of the time but if we suffer an IRQ storm and those interrupts trigger faster than the hardware clockevents min delay, our tick won't fire until that IRQ storm is finished. Here is the problem: on IRQ exit we reprog the timer to at least NOW() + min_clockevents_delay. Another IRQ fires before the tick so we reschedule again to NOW() + min_clockevents_delay, etc... The tick is eternally rescheduled min_clockevents_delay ahead. A solution is to simply remove this soft tick restart. After all the normal dynticks evaluation path can handle 0 delay just fine. And by doing that we benefit from the optimization branch which avoids clock reprogramming if the clockevents deadline hasn't changed since the last reprog. This fixes our issue because we don't do repetitive clock reprog that always add hardware min delay. As a side effect it should even optimize the 0 delay path in general. Reported-and-tested-by: Octavian Purdila <octavian.purdila@nxp.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1496328429-13317-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-04alarmtimer: Switch over to generic set/get/rearm routineThomas Gleixner
All required callbacks are in place. Switch the alarm timer based posix interval timer callbacks to the common implementation and remove the incorrect private implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.825471962@linutronix.de
2017-06-04alarmtimer: Implement arm callbackThomas Gleixner
Preparatory change to utilize the common posix timer mechanisms. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.747567162@linutronix.de
2017-06-04alarmtimer: Implement try_to_cancel callbackThomas Gleixner
Preparatory change to utilize the common posix timer mechanisms. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.670026824@linutronix.de
2017-06-04alarmtimer: Implement remaining callbackThomas Gleixner
Preparatory change to utilize the common posix timer mechanisms. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.592676753@linutronix.de
2017-06-04alarmtimer: Implement forward callbackThomas Gleixner
Preparatory change to utilize the common posix timer mechanisms. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.513694229@linutronix.de
2017-06-04alarmtimer: Implement timer_rearm() callbackThomas Gleixner
Preparatory change to utilize the common posix timer mechanisms. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.434598989@linutronix.de
2017-06-04posix-timers: Make use of cancel/arm callbacksThomas Gleixner
Replace the hrtimer calls by calls to the new try_to_cancel()/arm() kclock callbacks and move the hrtimer specific implementation into the corresponding callback functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.355396667@linutronix.de
2017-06-04posix-timers: Add cancel/arm callbacksThomas Gleixner
Add timer_try_to_cancel() and timer_arm() callbacks to kclock which allow to make common_timer_set() usable by both hrtimer and alarmtimer based clocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.278022962@linutronix.de
2017-06-04posix-timers: Zero settings value in common codeThomas Gleixner
Zero out the settings struct in the common code so the callbacks do not have to do it themself. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.200870713@linutronix.de
2017-06-04posix-timers: Make use of forward/remaining callbacksThomas Gleixner
Replace the hrtimer calls by calls to the new forward/remaining kclock callbacks and move the hrtimer specific implementation into the corresponding callback functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.121437232@linutronix.de
2017-06-04posix-timers: Add forward/remaining callbacksThomas Gleixner
Add two callbacks to kclock which allow using common_)timer_get() for both hrtimer and alarm timer based clocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211657.044915536@linutronix.de
2017-06-04posix-timers: Add active flag to k_itimerThomas Gleixner
Keep track of the activation state of posix timers. This is a preparatory change for making common_timer_get() usable by both hrtimer and alarm timer implementations. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.967783982@linutronix.de
2017-06-04posix-timers: Use timer_rearm() callback in posixtimer_rearm()Thomas Gleixner
Use the new timer_rearm() callback to replace the conditional hardcoded calls into the hrtimer and cpu timer code. This allows later to bring the same logic to alarmtimers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.889661919@linutronix.de
2017-06-04posix-timers: Rename do_schedule_next_timerThomas Gleixner
That function is a misnomer. Rename it with a proper prefix to posixtimer_rearm(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.811362578@linutronix.de
2017-06-04posix-timers: Add timer_rearm() callbackThomas Gleixner
Add a timer_rearm() callback which is used to make the rescheduling of posix interval timers independent of the underlying clock implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.732632167@linutronix.de
2017-06-04posix-timers: Store k_clock pointer in k_itimerThomas Gleixner
Having the k_clock pointer in the k_itimer struct avoids the lookup in several code pathes and makes the next steps of unification of the hrtimer and alarmtimer based posix timers simpler. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.641222072@linutronix.de
2017-06-04posix-timers: Move interval out of the unionThomas Gleixner
Preparatory patch to unify the alarm timer and hrtimer based posix interval timer handling. The interval is used as a criteria for rearming decisions so moving it out of the clock specific data structures allows later unification. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.563922908@linutronix.de
2017-06-04posix-timers: Unify overrun/requeue_pending handlingThomas Gleixner
hrtimer based posix-timers and posix-cpu-timers handle the update of the rearming and overflow related status fields differently. Move that update to the common rearming code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.484936964@linutronix.de
2017-06-04posix-timers: Move posix-timer internals to coreThomas Gleixner
None of these declarations is required outside of kernel/time. Move them to an internal header. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170530211656.394803853@linutronix.de
2017-06-04posix-timers: Avoid gazillions of forward declarationsThomas Gleixner
Move it below the actual implementations as there are new callbacks coming which would require even more forward declarations. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.238209952@linutronix.de
2017-06-04posix-clocks: Remove interval timer facility and mmap/fasync callbacksThomas Gleixner
The only user of this facility is ptp_clock, which does not implement any of those functions. Remove them to prevent accidental users. Especially the interval timer interfaces are now more or less impossible to implement because the necessary infrastructure has been confined to the core code. Aside of that it's really complex to make these callbacks implemented according to spec as the alarm timer implementation demonstrates. If at all then a nanosleep callback might be a reasonable extension. For now keep just what ptp_clock needs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.145036286@linutronix.de
2017-06-04posix-timers: Remove unused export of posix_timer_event()Thomas Gleixner
Since the removal of the mmtimer driver the export is not longer needed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.052744418@linutronix.de
generated by cgit (git 2.34.1) at 2025-09-13 09:29:24 +0000