| Age | Commit message (Collapse) | Author |
|---|
|
As the trace event powernv_throttle is only used by the powernv code, move
it to a separate include file and have that code directly enable it.
Trace events can take up around 5K of memory when they are defined
regardless if they are used or not. It wastes memory to have them defined
in configurations where the tracepoint is not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612145407.906308844@goodmis.org
Fixes: 0306e481d479a ("cpufreq: powernv/tracing: Add powernv_throttle tracepoint")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix timerlat with use of FORTIFY_SOURCE
FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.
timerlat has the following:
memcpy(&entry->caller, fstack->calls, size);
entry->size = size;
Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.
Swap the order to satisfy FORTIFY_SOURCE logic.
- Add down_write(trace_event_sem) when adding trace events in modules
Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.
Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm it is held when iterating the
list.
* tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add down_write(trace_event_sem) when adding trace event
tracing/osnoise: Fix crash in timerlat_dump_stack()
|
|
When a module is loaded, it adds trace events defined by the module. It
may also need to modify the modules trace printk formats to replace enum
names with their values.
If two modules are loaded at the same time, the adding of the event to the
ftrace_events list can corrupt the walking of the list in the code that is
modifying the printk format strings and crash the kernel.
The addition of the event should take the trace_event_sem for write while
it adds the new event.
Also add a lockdep_assert_held() on that semaphore in
__trace_add_event_dirs() as it iterates the list.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250718223158.799bfc0c@batman.local.home
Reported-by: Fusheng Huang(黄富生) <Fusheng.Huang@luxshare-ict.com>
Closes: https://lore.kernel.org/all/20250717105007.46ccd18f@batman.local.home/
Fixes: 110bf2b764eb6 ("tracing: add protection around module events unload")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
We have observed kernel panics when using timerlat with stack saving,
with the following dmesg output:
memcpy: detected buffer overflow: 88 byte write of buffer size 0
WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0
CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy)
Call Trace:
<TASK>
? trace_buffer_lock_reserve+0x2a/0x60
__fortify_panic+0xd/0xf
__timerlat_dump_stack.cold+0xd/0xd
timerlat_dump_stack.part.0+0x47/0x80
timerlat_fd_read+0x36d/0x390
vfs_read+0xe2/0x390
? syscall_exit_to_user_mode+0x1d5/0x210
ksys_read+0x73/0xe0
do_syscall_64+0x7b/0x160
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
__timerlat_dump_stack() constructs the ftrace stack entry like this:
struct stack_entry *entry;
...
memcpy(&entry->caller, fstack->calls, size);
entry->size = fstack->nr_entries;
Since commit e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to
kernel_stack event structure"), struct stack_entry marks its caller
field with __counted_by(size). At the time of the memcpy, entry->size
contains garbage from the ringbuffer, which under some circumstances is
zero, triggering a kernel panic by buffer overflow.
Populate the size field before the memcpy so that the out-of-bounds
check knows the correct size. This is analogous to
__ftrace_trace_stack().
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Attila Fazekas <afazekas@redhat.com>
Link: https://lore.kernel.org/20250716143601.7313-1-tglozar@redhat.com
Fixes: e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use BTF_ID_LIST_SINGLE(a, b, c) instead of
BTF_ID_LIST(a)
BTF_ID(b, c)
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/r/20250710055419.70544-1-yangfeng59949@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After a recent change in clang to strengthen uninitialized warnings [1],
it points out that in one of the error paths in parse_btf_arg(), params
is used uninitialized:
kernel/trace/trace_probe.c:660:19: warning: variable 'params' is uninitialized when used here [-Wuninitialized]
660 | return PTR_ERR(params);
| ^~~~~~
Match many other NO_BTF_ENTRY error cases and return -ENOENT, clearing
up the warning.
Link: https://lore.kernel.org/all/20250715-trace_probe-fix-const-uninit-warning-v1-1-98960f91dd04@kernel.org/
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2110
Fixes: d157d7694460 ("tracing/probes: Support BTF field access from $retval")
Link: https://github.com/llvm/llvm-project/commit/2464313eef01c5b1edf0eccf57a32cdee01472c7 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add zoned block commands to blk_fill_rwbs:
- ZONE APPEND will be decoded as 'ZA'
- ZONE RESET will be decoded as 'ZR'
- ZONE RESET ALL will be decoded as 'ZRA'
- ZONE FINISH will be decoded as 'ZF'
- ZONE OPEN will be decoded as 'ZO'
- ZONE CLOSE will be decoded as 'ZC'
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250715115324.53308-2-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Attach_type will be set when a link is created by user. It is better to
record attach_type in bpf_link generically and have it available
universally for all link types. So add the attach_type field in bpf_link
and move the sleepable field to avoid unnecessary gap padding.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250710032038.888700-2-chen.dylane@linux.dev
|
|
The comment above buffer mentions sign, 10 bytes width for number and null
terminator, but buffer itself isn't large enough to hold that much data.
This is a cosmetic change, since PID cannot be negative, other than -1.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/20250617152110.2530-1-a.sadovnikov@ispras.ru
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Rewind persistent ring buffer pages which have been read in the previous
boot. Those pages are highly possible to be lost before writing it to the
disk if the previous kernel crashed. In this case, the trace data is kept
on the persistent ring buffer, but it can not be read because its commit
size has been reset after read. This skips clearing the commit size of
each sub-buffer and recover it after reboot.
Note: If you read the previous boot data via trace_pipe, that is not
accessible in that time. But reboot without clearing (or reusing) the read
data, the read data is recovered again in the next boot.
Thus, when you read the previous boot data, clear it by `echo > trace`.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174899582116.955054.773265393511190051.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that there are 2 monitors for real-time applications, users may want to
enable both of them simultaneously. Make the number of per-task monitor
configurable. Default it to 2 for now.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/93e83313fc4ba7f6e66f4abe80ca5f5494d658d0.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a monitor for checking that real-time tasks do not go to sleep in a
manner that may cause undesirable latency.
Also change
RV depends on TRACING
to
RV select TRACING
to avoid the following recursive dependency:
error: recursive dependency detected!
symbol TRACING is selected by PREEMPTIRQ_TRACEPOINTS
symbol PREEMPTIRQ_TRACEPOINTS depends on TRACE_IRQFLAGS
symbol TRACE_IRQFLAGS is selected by RV_MON_SLEEP
symbol RV_MON_SLEEP depends on RV
symbol RV depends on TRACING
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/75bc5bcc741d153aa279c95faf778dff35c5c8ad.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Userspace real-time applications may have design flaws that they raise
page faults in real-time threads, and thus have unexpected latencies.
Add an linear temporal logic monitor to detect this scenario.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/78fea8a2de6d058241d3c6502c1a92910772b0ed.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the container "rtapp" which is the monitor collection for detecting
problems with real-time applications. The monitors will be added in the
follow-up commits.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/fb18b87631d386271de00959d8d4826f23fcd1cd.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
While attempting to implement DA monitors for some complex specifications,
deterministic automaton is found to be inappropriate as the specification
language. The automaton is complicated, hard to understand, and
error-prone.
For these cases, linear temporal logic is more suitable as the
specification language.
Add support for linear temporal logic runtime verification monitor.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/d366c1fed60ed4e8f6451f3c15a99755f2740b5f.1752088709.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
CONFIG_DA_MON_EVENTS is not specific to deterministic automaton. It could
be used for other monitor types. Therefore rename it to
CONFIG_RV_MON_EVENTS.
This prepares for the introduction of linear temporal logic monitor.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/507210517123d887c1d208aa2fd45ec69765d3f0.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Each RV monitor has one static buffer to send to the reactors. If multiple
errors are detected simultaneously, the one buffer could be overwritten.
Instead, leave it to the reactors to handle buffering.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Without "#undef TRACE_INCLUDE_FILE", there could be a build error due to
TRACE_INCLUDE_FILE being redefined. Therefore add it.
Also fix a typo while at it.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/f805e074581e927bb176c742c981fa7675b6ebe5.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Fall back to dynamic allocation here.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Chen <chensong_2000@189.cn>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250620111215.3365305-1-arnd@kernel.org
Fixes: 4b9091e1c194 ("kernel: trace: preemptirq_delay_test: add cpu affinity")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Freeing of filters requires to wait for both an RCU grace period as well as
a RCU task trace wait period after they have been detached from their
lists. The trace task period can be quite large so the freeing of the
filters was moved to use the call_rcu*() routines. The problem with that is
that the callback functions of call_rcu*() is done from a soft irq and can
cause latencies if the callback takes a bit of time.
The filters are freed per event in a system and the syscalls system
contains an event per system call, which can be over 700 events. Freeing 700
filters in a bottom half is undesirable.
Instead, move the freeing to use queue_rcu_work() which is done in task
context.
Link: https://lore.kernel.org/all/9a2f0cd0-1561-4206-8966-f93ccd25927f@paulmck-laptop/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250609131732.04fd303b@gandalf.local.home
Fixes: a9d0aab5eb33 ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The dedicated cpumask_next_wrap() is more verbose and effective than
cpumask_next() followed by cpumask_first().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250605000651.45281-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Show kprobe_multi link info with fdinfo, the info as follows:
link_type: kprobe_multi
link_id: 1
prog_tag: a69740b9746f7da8
prog_id: 21
kprobe_cnt: 8
missed: 0
cookie func
1 bpf_fentry_test1+0x0/0x20
7 bpf_fentry_test2+0x0/0x20
2 bpf_fentry_test3+0x0/0x20
3 bpf_fentry_test4+0x0/0x20
4 bpf_fentry_test5+0x0/0x20
5 bpf_fentry_test6+0x0/0x20
6 bpf_fentry_test7+0x0/0x20
8 bpf_fentry_test8+0x0/0x10
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250702153958.639852-3-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Show uprobe_multi link info with fdinfo, the info as follows:
link_type: uprobe_multi
link_id: 9
prog_tag: e729f789e34a8eca
prog_id: 39
uprobe_cnt: 3
pid: 0
path: /home/dylane/bpf/tools/testing/selftests/bpf/test_progs
cookie offset ref_ctr_offset
3 0xa69f13 0x0
1 0xa69f1e 0x0
2 0xa69f29 0x0
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250702153958.639852-2-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Alexei suggested, 'link_type' can be more precise and differentiate
for human in fdinfo. In fact BPF_LINK_TYPE_KPROBE_MULTI includes
kretprobe_multi type, the same as BPF_LINK_TYPE_UPROBE_MULTI, so we
can show it more concretely.
link_type: kprobe_multi
link_id: 1
prog_tag: d2b307e915f0dd37
...
link_type: kretprobe_multi
link_id: 2
prog_tag: ab9ea0545870781d
...
link_type: uprobe_multi
link_id: 9
prog_tag: e729f789e34a8eca
...
link_type: uretprobe_multi
link_id: 10
prog_tag: 7db356c03e61a4d4
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250702153958.639852-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As same as fprobe, register tracepoint stub function only when enabling
tprobe events. The major changes are introducing a list of
tracepoint_user and its lock, and tprobe_event_module_nb, which is
another module notifier for module loading/unloading. By spliting the
lock from event_mutex and a module notifier for trace_fprobe, it
solved AB-BA lock dependency issue between event_mutex and
tracepoint_module_list_mutex.
Link: https://lore.kernel.org/all/174343538901.843280.423773753642677941.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Currently fprobe events are registered when it is defined. Thus it will
give some overhead even if it is disabled. This changes it to register the
fprobe only when it is enabled.
Link: https://lore.kernel.org/all/174343537128.843280.16131300052837035043.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Allow user to set multiple tracepoint-probe events on the same
tracepoint. After the last tprobe-event is removed, the tracepoint
callback is unregistered.
Link: https://lore.kernel.org/all/174343536245.843280.6548776576601537671.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Remove unneeded 'mod' struct module pointer field from trace_fprobe
because we don't need to save this info.
Link: https://lore.kernel.org/all/174343535351.843280.5868426549023332120.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Cleanup __store_entry_arg() so that it is easier to understand.
The main complexity may come from combining the loops for finding
stored-entry-arg and max-offset and appending new entry.
This split those different loops into 3 parts, lookup the same
entry-arg, find the max offset and append new entry.
Link: https://lore.kernel.org/all/174323039929.348535.4705349977127704120.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
If the processing of the tr->events loop fails, the filter that has been
added to filter_head will be released twice in free_filter_list(&head->rcu)
and __free_filter(filter).
After adding the filter of tr->events, add the filter to the filter_head
process to avoid triggering uaf.
Link: https://lore.kernel.org/tencent_4EF87A626D702F816CD0951CE956EC32CD0A@qq.com
Fixes: a9d0aab5eb33 ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Reported-by: syzbot+daba72c4af9915e9c894@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=daba72c4af9915e9c894
Tested-by: syzbot+daba72c4af9915e9c894@syzkaller.appspotmail.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Cross-merge BPF, perf and other fixes after downstream PRs.
It restores BPF CI to green after critical fix
commit bc4394e5e79c ("perf: Fix the throttle error of some clock events")
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When setting the funcgraph-args option when function graph tracer is net
enabled, it incorrectly enables it. Worse, it unregisters itself when it
was never registered. Then when it gets enabled again, it will register
itself a second time causing a WARNing.
~# echo 1 > /sys/kernel/tracing/options/funcgraph-args
~# head -20 /sys/kernel/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 813/26317372 #P:8
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
<idle>-0 [007] d..4. 358.966010: 7) 1.692 us | fetch_next_timer_interrupt(basej=4294981640, basem=357956000000, base_local=0xffff88823c3ae040, base_global=0xffff88823c3af300, tevt=0xffff888100e47cb8);
<idle>-0 [007] d..4. 358.966012: 7) | tmigr_cpu_deactivate(nextexp=357988000000) {
<idle>-0 [007] d..4. 358.966013: 7) | _raw_spin_lock(lock=0xffff88823c3b2320) {
<idle>-0 [007] d..4. 358.966014: 7) 0.981 us | preempt_count_add(val=1);
<idle>-0 [007] d..5. 358.966017: 7) 1.058 us | do_raw_spin_lock(lock=0xffff88823c3b2320);
<idle>-0 [007] d..4. 358.966019: 7) 5.824 us | }
<idle>-0 [007] d..5. 358.966021: 7) | tmigr_inactive_up(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
<idle>-0 [007] d..5. 358.966022: 7) | tmigr_update_events(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
Notice the "tracer: nop" at the top there. The current tracer is the "nop"
tracer, but the content is obviously the function graph tracer.
Enabling function graph tracing will cause it to register again and
trigger a warning in the accounting:
~# echo function_graph > /sys/kernel/tracing/current_tracer
-bash: echo: write error: Device or resource busy
With the dmesg of:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 1095 at kernel/trace/ftrace.c:3509 ftrace_startup_subops+0xc1e/0x1000
Modules linked in: kvm_intel kvm irqbypass
CPU: 7 UID: 0 PID: 1095 Comm: bash Not tainted 6.16.0-rc2-test-00006-gea03de4105d3 #24 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ftrace_startup_subops+0xc1e/0x1000
Code: 48 b8 22 01 00 00 00 00 ad de 49 89 84 24 88 01 00 00 8b 44 24 08 89 04 24 e9 c3 f7 ff ff c7 04 24 ed ff ff ff e9 b7 f7 ff ff <0f> 0b c7 04 24 f0 ff ff ff e9 a9 f7 ff ff c7 04 24 f4 ff ff ff e9
RSP: 0018:ffff888133cff948 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 1ffff1102679ff31 RCX: 0000000000000000
RDX: 1ffffffff0b27a60 RSI: ffffffff8593d2f0 RDI: ffffffff85941140
RBP: 00000000000c2041 R08: ffffffffffffffff R09: ffffed1020240221
R10: ffff88810120110f R11: ffffed1020240214 R12: ffffffff8593d2f0
R13: ffffffff8593d300 R14: ffffffff85941140 R15: ffffffff85631100
FS: 00007f7ec6f28740(0000) GS:ffff8882b5251000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7ec6f181c0 CR3: 000000012f1d0005 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __pfx_ftrace_startup_subops+0x10/0x10
? find_held_lock+0x2b/0x80
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? trace_preempt_on+0xd0/0x110
? __pfx_trace_graph_entry_args+0x10/0x10
register_ftrace_graph+0x4d2/0x1020
? tracing_reset_online_cpus+0x14b/0x1e0
? __pfx_register_ftrace_graph+0x10/0x10
? ring_buffer_record_enable+0x16/0x20
? tracing_reset_online_cpus+0x153/0x1e0
? __pfx_tracing_reset_online_cpus+0x10/0x10
? __pfx_trace_graph_return+0x10/0x10
graph_trace_init+0xfd/0x160
tracing_set_tracer+0x500/0xa80
? __pfx_tracing_set_tracer+0x10/0x10
? lock_release+0x181/0x2d0
? _copy_from_user+0x26/0xa0
tracing_set_trace_write+0x132/0x1e0
? __pfx_tracing_set_trace_write+0x10/0x10
? ftrace_graph_func+0xcc/0x140
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
vfs_write+0x1d0/0xe90
? __pfx_vfs_write+0x10/0x10
Have the setting of the funcgraph-args check if function_graph tracer is
the current tracer of the instance, and if not, do nothing, as there's
nothing to do (the option is checked when function_graph tracing starts).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250618073801.057ea636@gandalf.local.home
Fixes: c7a60a733c373 ("ftrace: Have funcgraph-args take affect during tracing")
Closes: https://lore.kernel.org/all/4ab1a7bdd0174ab09c7b0d68cdbff9a4@huawei.com/
Reported-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The underlying lookup_user_key() function uses a signed 32 bit integer
for key serial numbers because legitimate serial numbers are positive
(and > 3) and keyrings are negative. Using a u32 for the keyring in
the bpf function doesn't currently cause any conversion problems but
will start to trip the signed to unsigned conversion warnings when the
kernel enables them, so convert the argument to signed (and update the
tests accordingly) before it acquires more users.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/84cdb0775254d297d75e21f577089f64abdfbd28.camel@HansenPartnership.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The variable "head" is allocated and initialized as a list before
allocating the first "item" for the list. If the allocation of "item"
fails, it frees "head" and then jumps to the label "free_now" which will
process head and free it.
This will cause a UAF of "head", and it doesn't need to free it before
jumping to the "free_now" label as that code will free it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250610093348.33c5643a@gandalf.local.home
Fixes: a9d0aab5eb33 ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202506070424.lCiNreTI-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
- Fix ring_buffer_subbuf_order_set() error path lock protection
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
|
|
Running sparse on trace_events_filter.c triggered several warnings about
file->filter being accessed directly even though it's annotated with __rcu.
Add rcu_dereference() around it and shuffle the logic slightly so that
it's always referenced via accessor functions.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250607102821.6c7effbf@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions
- Support for getrandom() in the VDSO
- Support for mseal
- Optimized routines for raid6 syndrome and recovery calculations
- kexec_file() supports loading Image-formatted kernel binaries
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
|
|
Enlarge the critical section in ring_buffer_subbuf_order_set() to
ensure that error handling takes place with per-buffer mutex held,
thus preventing list corruption and other concurrency-related issues.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Link: https://lore.kernel.org/20250606112242.1510605-1-dmantipov@yandex.ru
Reported-by: syzbot+05d673e83ec640f0ced9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=05d673e83ec640f0ced9
Fixes: f9b94daa542a8 ("ring-buffer: Set new size of the ring buffer sub page")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When faultable trace events were added, a trace event may no longer use
normal RCU to synchronize but instead used synchronize_rcu_tasks_trace().
This synchronization takes a much longer time to synchronize.
The filter logic would free the filters by calling
tracepoint_synchronize_unregister() after it unhooked the filter strings
and before freeing them. With this function now calling
synchronize_rcu_tasks_trace() this increased the time to free a filter
tremendously. On a PREEMPT_RT system, it was even more noticeable.
# time trace-cmd record -p function sleep 1
[..]
real 2m29.052s
user 0m0.244s
sys 0m20.136s
As trace-cmd would clear out all the filters before recording, it could
take up to 2 minutes to do a recording of "sleep 1".
To find out where the issues was:
~# trace-cmd sqlhist -e -n sched_stack select start.prev_state as state, end.next_comm as comm, TIMESTAMP_DELTA_USECS as delta, start.STACKTRACE as stack from sched_switch as start join sched_switch as end on start.prev_pid = end.next_pid
Which will produce the following commands (and -e will also execute them):
echo 's:sched_stack s64 state; char comm[16]; u64 delta; unsigned long stack[];' >> /sys/kernel/tracing/dynamic_events
echo 'hist:keys=prev_pid:__arg_18057_2=prev_state,__arg_18057_4=common_timestamp.usecs,__arg_18057_7=common_stacktrace' >> /sys/kernel/tracing/events/sched/sched_switch/trigger
echo 'hist:keys=next_pid:__state_18057_1=$__arg_18057_2,__comm_18057_3=next_comm,__delta_18057_5=common_timestamp.usecs-$__arg_18057_4,__stack_18057_6=$__arg_18057_7:onmatch(sched.sched_switch).trace(sched_stack,$__state_18057_1,$__comm_18057_3,$__delta_18057_5,$__stack_18057_6)' >> /sys/kernel/tracing/events/sched/sched_switch/trigger
The above creates a synthetic event that creates a stack trace when a task
schedules out and records it with the time it scheduled back in. Basically
the time a task is off the CPU. It also records the state of the task when
it left the CPU (running, blocked, sleeping, etc). It also saves the comm
of the task as "comm" (needed for the next command).
~# echo 'hist:keys=state,stack.stacktrace:vals=delta:sort=state,delta if comm == "trace-cmd" && state & 3' > /sys/kernel/tracing/events/synthetic/sched_stack/trigger
The above creates a histogram with buckets per state, per stack, and the
value of the total time it was off the CPU for that stack trace. It filters
on tasks with "comm == trace-cmd" and only the sleeping and blocked states
(1 - sleeping, 2 - blocked).
~# trace-cmd record -p function sleep 1
~# cat /sys/kernel/tracing/events/synthetic/sched_stack/hist | tail -18
{ state: 2, stack.stacktrace __schedule+0x1545/0x3700
schedule+0xe2/0x390
schedule_timeout+0x175/0x200
wait_for_completion_state+0x294/0x440
__wait_rcu_gp+0x247/0x4f0
synchronize_rcu_tasks_generic+0x151/0x230
apply_subsystem_event_filter+0xa2b/0x1300
subsystem_filter_write+0x67/0xc0
vfs_write+0x1e2/0xeb0
ksys_write+0xff/0x1d0
do_syscall_64+0x7b/0x420
entry_SYSCALL_64_after_hwframe+0x76/0x7e
} hitcount: 237 delta: 99756288 <<--------------- Delta is 99 seconds!
Totals:
Hits: 525
Entries: 21
Dropped: 0
This shows that this particular trace waited for 99 seconds on
synchronize_rcu_tasks() in apply_subsystem_event_filter().
In fact, there's a lot of places in the filter code that spends a lot of
time waiting for synchronize_rcu_tasks_trace() in order to free the
filters.
Add helper functions that will use call_rcu*() variants to asynchronously
free the filters. This brings the timings back to normal:
# time trace-cmd record -p function sleep 1
[..]
real 0m14.681s
user 0m0.335s
sys 0m28.616s
And the histogram also shows this:
~# cat /sys/kernel/tracing/events/synthetic/sched_stack/hist | tail -21
{ state: 2, stack.stacktrace __schedule+0x1545/0x3700
schedule+0xe2/0x390
schedule_timeout+0x175/0x200
wait_for_completion_state+0x294/0x440
__wait_rcu_gp+0x247/0x4f0
synchronize_rcu_normal+0x3db/0x5c0
tracing_reset_online_cpus+0x8f/0x1e0
tracing_open+0x335/0x440
do_dentry_open+0x4c6/0x17a0
vfs_open+0x82/0x360
path_openat+0x1a36/0x2990
do_filp_open+0x1c5/0x420
do_sys_openat2+0xed/0x180
__x64_sys_openat+0x108/0x1d0
do_syscall_64+0x7b/0x420
} hitcount: 2 delta: 77044
Totals:
Hits: 55
Entries: 28
Dropped: 0
Where the total waiting time of synchronize_rcu_tasks_trace() is 77
milliseconds.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Andreas Ziegler <ziegler.andreas@siemens.com>
Cc: Felix MOESSBAUER <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/20250606201936.1e3d09a9@batman.local.home
Reported-by: "Flot, Julien" <julien.flot@siemens.com>
Tested-by: Julien Flot <julien.flot@siemens.com>
Fixes: a363d27cdbc2 ("tracing: Allow system call tracepoints to handle page faults")
Closes: https://lore.kernel.org/all/240017f656631c7dd4017aa93d91f41f653788ea.camel@siemens.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.16-rc1, part 2
* Performance improvements
- Add support for vdso getrandom
- Implement raid6 calculations using vectors
- Introduce svinval tlb invalidation
* Cleanup
- A bunch of deduplication of the macros we use for manipulating instructions
* Misc
- Introduce a kunit test for kprobes
- Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))
[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]
* alex-pr-2: (866 commits)
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
riscv: Add kprobes KUnit test
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
riscv: kprobes: Move branch_funct3 to insn.h
riscv: kprobes: Move branch_rs2_idx to insn.h
Linux 6.15-rc6
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
...
|
|
The following ftrace patch for riscv uses a data store to update ftrace
function. Therefore, a romote fence is required to order it against
function_trace_op updates. The mechanism is similar to the fence between
function_trace_op and update_ftrace_func in the generic ftrace, so we
leverage the same ftrace_sync_ipi function.
[ alex: Fix build warning when !CONFIG_DYNAMIC_FTRACE ]
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/r/20250407180838.42877-4-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
If ftrace is disabled, it is meaningless to allocate a module map.
Add a check in allocate_ftrace_mod_map() to not allocate if ftrace is
disabled.
Link: https://lore.kernel.org/20250529111955.2349189-3-yebin@huaweicloud.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The following issue happens with a buggy module:
BUG: unable to handle page fault for address: ffffffffc05d0218
PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
RIP: 0010:sized_strscpy+0x81/0x2f0
RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000
RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d
RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68
R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038
R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff
FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ftrace_mod_get_kallsym+0x1ac/0x590
update_iter_mod+0x239/0x5b0
s_next+0x5b/0xa0
seq_read_iter+0x8c9/0x1070
seq_read+0x249/0x3b0
proc_reg_read+0x1b0/0x280
vfs_read+0x17f/0x920
ksys_read+0xf3/0x1c0
do_syscall_64+0x5f/0x2e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The above issue may happen as follows:
(1) Add kprobe tracepoint;
(2) insmod test.ko;
(3) Module triggers ftrace disabled;
(4) rmmod test.ko;
(5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed;
ftrace_mod_get_kallsym()
...
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
...
The problem is when a module triggers an issue with ftrace and
sets ftrace_disable. The ftrace_disable is set when an anomaly is
discovered and to prevent any more damage, ftrace stops all text
modification. The issue that happened was that the ftrace_disable stops
more than just the text modification.
When a module is loaded, its init functions can also be traced. Because
kallsyms deletes the init functions after a module has loaded, ftrace
saves them when the module is loaded and function tracing is enabled. This
allows the output of the function trace to show the init function names
instead of just their raw memory addresses.
When a module is removed, ftrace_release_mod() is called, and if
ftrace_disable is set, it just returns without doing anything more. The
problem here is that it leaves the mod_list still around and if kallsyms
is called, it will call into this code and access the module memory that
has already been freed as it will return:
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
Where the "mod" no longer exists and triggers a UAF bug.
Link: https://lore.kernel.org/all/20250523135452.626d8dcd@gandalf.local.home/
Cc: stable@vger.kernel.org
Fixes: aba4b5c22cba ("ftrace: Save module init functions kallsyms symbols for tracing")
Link: https://lore.kernel.org/20250529111955.2349189-2-yebin@huaweicloud.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Allow the persistent ring buffer to be memory mapped
In the last merge window there was issues with the implementation of
mapping the persistent ring buffer because it was assumed that the
persistent memory was just physical memory without being part of the
kernel virtual address space. But this was incorrect and the
persistent ring buffer can be mapped the same way as the allocated
ring buffer is mapped.
The metadata for the persistent ring buffer is different than the
normal ring buffer and the organization of mapping it to user space
is a little different. Make the updates needed to the meta data to
allow the persistent ring buffer to be mapped to user space.
- Fix cpus_read_lock() with buffer->mutex and cpu_buffer->mapping_lock
Mapping the ring buffer to user space uses the
cpu_buffer->mapping_lock. The buffer->mutex can be taken when the
mapping_lock is held, giving the locking order of:
cpu_buffer->mapping_lock -->> buffer->mutex. But there also exists
the ordering:
buffer->mutex -->> cpus_read_lock()
mm->mmap_lock -->> cpu_buffer->mapping_lock
cpus_read_lock() -->> mm->mmap_lock
causing a circular chain of:
cpu_buffer->mapping_lock -> buffer->mutex -->> cpus_read_lock() -->>
mm->mmap_lock -->> cpu_buffer->mapping_lock
By moving the cpus_read_lock() outside the buffer->mutex where:
cpus_read_lock() -->> buffer->mutex, breaks the deadlock chain.
- Do not trigger WARN_ON() for commit overrun
When the ring buffer is user space mapped and there's a "commit
overrun" (where an interrupt preempted an event, and then added so
many events it filled the buffer having to drop events when it hit
the preempted event) a WARN_ON() was triggered if this was read via a
memory mapped buffer.
This is due to "missed events" being non zero when the reader page
ended up with the commit page. The idea was, if the writer is on the
reader page, there's only one page that has been written to and there
should be no missed events.
But if a commit overrun is done where the writer is off the commit
page and looped around to the commit page causing missed events, it
is possible that the reader page is the commit page with missed
events.
Instead of triggering a WARN_ON() when the reader page is the commit
page with missed events, trigger it when the reader page is the
tail_page with missed events. That's because the writer is always on
the tail_page if an event was interrupted (which holds the commit
event) and continues off the commit page.
- Reset the persistent buffer if it is fully consumed
On boot up, if the user fully consumes the last boot buffer of the
persistent buffer, if it reboots without enabling it, there will
still be events in the buffer which can cause confusion. Instead,
reset the buffer when it is fully consumed, so that the data is not
read again.
- Clean up some goto out jumps
There's a few cases that the code jumps to the "out:" label that
simply returns a value. There used to be more work done at those
labels but now that they simply return a value use a return instead
of jumping to a label.
- Use guard() to simplify some of the code
Add guard() around some locking instead of jumping to a label to do
the unlocking.
- Use free() to simplify some of the code
Use free(kfree) on variables that will get freed on error and use
return_ptr() to return the variable when its not freed. There's one
instance where free(kfree) simplifies the code on a temp variable
that was allocated just for the function use.
* tag 'trace-ringbuffer-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Simplify functions with __free(kfree) to free allocations
ring-buffer: Make ring_buffer_{un}map() simpler with guard(mutex)
ring-buffer: Simplify ring_buffer_read_page() with guard()
ring-buffer: Simplify reset_disabled_cpu_buffer() with use of guard()
ring-buffer: Remove jump to out label in ring_buffer_swap_cpu()
ring-buffer: Removed unnecessary if() goto out where out is the next line
tracing: Reset last-boot buffers when reading out all cpu buffers
ring-buffer: Allow reserve_mem persistent ring buffers to be mmapped
ring-buffer: Do not trigger WARN_ON() due to a commit_overrun
ring-buffer: Move cpus_read_lock() outside of buffer->mutex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull automount updates from Al Viro:
"Automount wart removal
A bunch of odd boilerplate gone from instances - the reason for
those was the need to protect the yet-to-be-attched mount from
mark_mounts_for_expiry() deciding to take it out.
But that's easy to detect and take care of in mark_mounts_for_expiry()
itself; no need to have every instance simulate mount being busy by
grabbing an extra reference to it, with finish_automount() undoing
that once it attaches that mount.
Should've done it that way from the very beginning... This is a
flagday change, thankfully there are very few instances.
vfs_submount() is gone - its sole remaining user (trace_automount)
had been switched to saner primitives"
* tag 'pull-automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kill vfs_submount()
saner calling conventions for ->d_automount()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
|
|
The function rb_allocate_pages() allocates cpu_buffer and on error needs
to free it. It has a single return. Use __free(kfree) and return directly
on errors and have the return use return_ptr(cpu_buffer).
The function alloc_buffer() allocates buffer and on error needs to free
it. It has a single return. Use __free(kfree) and return directly on
errors and have the return use return_ptr(buffer).
The function __rb_map_vma() allocates a temporary array "pages". Have it
use __free() and not worry about freeing it when returning.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250527143144.6edc4625@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Convert the taking of the buffer->mutex and the cpu_buffer->mapping_lock
over to guard(mutex) and simplify the ring_buffer_map() and
ring_buffer_unmap() functions.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250527122009.267efb72@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function ring_buffer_read_page() had two gotos. One was simply
returning "ret" and the other was unlocking the reader_lock.
There's no reason to use goto to simply return the "ret" variable. Instead
just return the value.
The jump to the unlocking of the reader_lock can be replaced by
guard(raw_spinlock_irqsave)(&cpu_buffer->reader_lock).
With these two changes the "ret" variable is no longer used and can be
removed. The return value on non-error is what was read and is stored in
the "read" variable.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250527145216.0187cf36@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
