| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit ad6b26b6a0a79166b53209df2ca1cf8636296382.
This commit introduces per-memcg/task NUMA balance statistics, but
unfortunately it introduced a NULL pointer exception due to the following
race condition: After a swap task candidate was chosen, its mm_struct
pointer was set to NULL due to task exit. Later, when performing the
actual task swapping, the p->mm caused the problem.
CPU0 CPU1
:
...
task_numa_migrate
task_numa_find_cpu
task_numa_compare
# a normal task p is chosen
env->best_task = p
# p exit:
exit_signals(p);
p->flags |= PF_EXITING
exit_mm
p->mm = NULL;
migrate_swap_stop
__migrate_swap_task((arg->src_task, arg->dst_cpu)
count_memcg_event_mm(p->mm, NUMA_TASK_SWAP)# p->mm is NULL
task_lock() should be held and the PF_EXITING flag needs to be checked to
prevent this from happening. After discussion, the conclusion was that
adding a lock is not worthwhile for some statistics calculations. Revert
the change and rely on the tracepoint for this purpose.
Link: https://lkml.kernel.org/r/20250704135620.685752-1-yu.c.chen@intel.com
Link: https://lkml.kernel.org/r/20250708064917.BBD13C4CEED@smtp.kernel.org
Fixes: ad6b26b6a0a7 ("sched/numa: add statistics of numa balance task")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Closes: https://lore.kernel.org/all/CAE4VaGBLJxpd=NeRJXpSCuw=REhC5LWJpC29kDy-Zh2ZDyzQZA@mail.gmail.com/
Reported-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Reported-by: Suneeth D <Suneeth.D@amd.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Hladky <jhladky@redhat.com>
Cc: Libo Chen <libo.chen@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The comment above buffer mentions sign, 10 bytes width for number and null
terminator, but buffer itself isn't large enough to hold that much data.
This is a cosmetic change, since PID cannot be negative, other than -1.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/20250617152110.2530-1-a.sadovnikov@ispras.ru
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Rewind persistent ring buffer pages which have been read in the previous
boot. Those pages are highly possible to be lost before writing it to the
disk if the previous kernel crashed. In this case, the trace data is kept
on the persistent ring buffer, but it can not be read because its commit
size has been reset after read. This skips clearing the commit size of
each sub-buffer and recover it after reboot.
Note: If you read the previous boot data via trace_pipe, that is not
accessible in that time. But reboot without clearing (or reusing) the read
data, the read data is recovered again in the next boot.
Thus, when you read the previous boot data, clear it by `echo > trace`.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174899582116.955054.773265393511190051.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that there are 2 monitors for real-time applications, users may want to
enable both of them simultaneously. Make the number of per-task monitor
configurable. Default it to 2 for now.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/93e83313fc4ba7f6e66f4abe80ca5f5494d658d0.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a monitor for checking that real-time tasks do not go to sleep in a
manner that may cause undesirable latency.
Also change
RV depends on TRACING
to
RV select TRACING
to avoid the following recursive dependency:
error: recursive dependency detected!
symbol TRACING is selected by PREEMPTIRQ_TRACEPOINTS
symbol PREEMPTIRQ_TRACEPOINTS depends on TRACE_IRQFLAGS
symbol TRACE_IRQFLAGS is selected by RV_MON_SLEEP
symbol RV_MON_SLEEP depends on RV
symbol RV depends on TRACING
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/75bc5bcc741d153aa279c95faf778dff35c5c8ad.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Userspace real-time applications may have design flaws that they raise
page faults in real-time threads, and thus have unexpected latencies.
Add an linear temporal logic monitor to detect this scenario.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/78fea8a2de6d058241d3c6502c1a92910772b0ed.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the container "rtapp" which is the monitor collection for detecting
problems with real-time applications. The monitors will be added in the
follow-up commits.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/fb18b87631d386271de00959d8d4826f23fcd1cd.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
While attempting to implement DA monitors for some complex specifications,
deterministic automaton is found to be inappropriate as the specification
language. The automaton is complicated, hard to understand, and
error-prone.
For these cases, linear temporal logic is more suitable as the
specification language.
Add support for linear temporal logic runtime verification monitor.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/d366c1fed60ed4e8f6451f3c15a99755f2740b5f.1752088709.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
CONFIG_DA_MON_EVENTS is not specific to deterministic automaton. It could
be used for other monitor types. Therefore rename it to
CONFIG_RV_MON_EVENTS.
This prepares for the introduction of linear temporal logic monitor.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/507210517123d887c1d208aa2fd45ec69765d3f0.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Each RV monitor has one static buffer to send to the reactors. If multiple
errors are detected simultaneously, the one buffer could be overwritten.
Instead, leave it to the reactors to handle buffering.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
vpanic() is useful for implementing runtime verification reactors. Add it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
vprintk_deferred() is useful for implementing runtime verification
reactors. Make it public.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Without "#undef TRACE_INCLUDE_FILE", there could be a build error due to
TRACE_INCLUDE_FILE being redefined. Therefore add it.
Also fix a typo while at it.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/f805e074581e927bb176c742c981fa7675b6ebe5.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Always trigger a resched after a protected period even if the entity is
still eligible. It can happen that an entity remains eligible at the end
of the protected period but must let an entity with a shorter slice to run
in order to keep its lag shorter than slice. This is particulalry true
with run to parity which tries to maximize the lag.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250708165630.1948751-7-vincent.guittot@linaro.org
|
|
When an entity is enqueued without preempting current, we must ensure
that the slice protection is updated to take into account the slice
duration of the newly enqueued task so that its lag will not exceed
its slice (+ tick).
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250708165630.1948751-6-vincent.guittot@linaro.org
|
|
Run to parity ensures that current will get a chance to run its full
slice in one go but this can create large latency and/or lag for
entities with shorter slice that have exhausted their previous slice
and wait to run their next slice.
Clamp the run to parity to the shortest slice of all enqueued entities.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250708165630.1948751-5-vincent.guittot@linaro.org
|
|
Even if the waking task can preempt current, it might not be the one
selected by pick_task_fair. Check that the waking task will be selected
if we cancel the slice protection before doing so.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250708165630.1948751-4-vincent.guittot@linaro.org
|
|
EEVDF expects the scheduler to allocate a time quantum to the selected
entity and then pick a new entity for next quantum.
Although this notion of time quantum is not strictly doable in our case,
we can ensure a minimum runtime for each task most of the time and pick a
new entity after a minimum time has elapsed.
Reuse the slice protection of run to parity to ensure such runtime
quantum.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250708165630.1948751-3-vincent.guittot@linaro.org
|
|
Replace the test by the relevant protect_slice() function.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dhaval Giani (AMD) <dhaval@gianis.ca>
Link: https://lkml.kernel.org/r/20250708165630.1948751-2-vincent.guittot@linaro.org
|
|
Chris reported that commit 5f6bd380c7bd ("sched/rt: Remove default
bandwidth control") caused a significant dip in his favourite
benchmark of the day. Simply disabling dl_server cured things.
His workload hammers the 0->1, 1->0 transitions, and the
dl_server_{start,stop}() overhead kills it -- fairly obviously a bad
idea in hind sight and all that.
Change things around to only disable the dl_server when there has not
been a fair task around for a whole period. Since the default period
is 1 second, this ensures the benchmark never trips this, overhead
gone.
Fixes: 557a6bfc662c ("sched/fair: Add trivial fair server")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20250702121158.465086194@infradead.org
|
|
Dietmar reported that commit 3840cbe24cf0 ("sched: psi: fix bogus
pressure spikes from aggregation race") caused a regression for him on
a high context switch rate benchmark (schbench) due to the now
repeating cpu_clock() calls.
In particular the problem is that get_recent_times() will extrapolate
the current state to 'now'. But if an update uses a timestamp from
before the start of the update, it is possible to get two reads
with inconsistent results. It is effectively back-dating an update.
(note that this all hard-relies on the clock being synchronized across
CPUs -- if this is not the case, all bets are off).
Combine this problem with the fact that there are per-group-per-cpu
seqcounts, the commit in question pushed the clock read into the group
iteration, causing tree-depth cpu_clock() calls. On architectures
where cpu_clock() has appreciable overhead, this hurts.
Instead move to a per-cpu seqcount, which allows us to have a single
clock read for all group updates, increasing internal consistency and
lowering update overhead. This comes at the cost of a longer update
side (proportional to the tree depth) which can cause the read side to
retry more often.
Fixes: 3840cbe24cf0 ("sched: psi: fix bogus pressure spikes from aggregation race")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>,
Link: https://lkml.kernel.org/20250522084844.GC31726@noisy.programming.kicks-ass.net
|
|
schbench (https://github.com/masoncl/schbench.git) is showing a
regression from previous production kernels that bisected down to:
sched/fair: Remove sysctl_sched_migration_cost condition (c5b0a7eefc)
The schbench command line was:
schbench -L -m 4 -M auto -t 256 -n 0 -r 0 -s 0
This creates 4 message threads pinned to CPUs 0-3, and 256x4 worker
threads spread across the rest of the CPUs. Neither the worker threads
or the message threads do any work, they just wake each other up and go
back to sleep as soon as possible.
The end result is the first 4 CPUs are pegged waking up those 1024
workers, and the rest of the CPUs are constantly banging in and out of
idle. If I take a v6.9 Linus kernel and revert that one commit,
performance goes from 3.4M RPS to 5.4M RPS.
schedstat shows there are ~100x more new idle balance operations, and
profiling shows the worker threads are spending ~20% of their CPU time
on new idle balance. schedstats also shows that almost all of these new
idle balance attemps are failing to find busy groups.
The fix used here is to crank up the cost of the newidle balance whenever it
fails. Since we don't want sd->max_newidle_lb_cost to grow out of
control, this also changes update_newidle_cost() to use
sysctl_sched_migration_cost as the upper limit on max_newidle_lb_cost.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250626144017.1510594-2-clm@fb.com
|
|
Since exit_task_work() runs after perf_event_exit_task_context() updated
ctx->task to TASK_TOMBSTONE, perf_sigtrap() from perf_pending_task() might
observe event->ctx->task == TASK_TOMBSTONE.
Swap the early exit tests in order not to hit WARN_ON_ONCE().
Closes: https://syzkaller.appspot.com/bug?extid=2fe61cb2a86066be6985
Reported-by: syzbot <syzbot+2fe61cb2a86066be6985@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b1c224bd-97f9-462c-a3e3-125d5e19c983@I-love.SAKURA.ne.jp
|
|
The upcoming auxiliary clocks need this hook, too.
To separate the architecture hooks from the timekeeper internals, refactor
the hook to only operate on a single vDSO clock.
While at it, use a more robust #define for the hook override.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250701-vdso-auxclock-v1-3-df7d9f87b9b8@linutronix.de
|
|
The logic to configure a 'struct vdso_clock' from a
'struct tk_read_base' is copied two times.
Split it into a shared function to reduce the duplication,
especially as another user will be added for auxiliary clocks.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250701-vdso-auxclock-v1-2-df7d9f87b9b8@linutronix.de
|
|
to pick up the __GENMASK() fix, otherwise the AUX clock VDSO patches fail
to compile for compat.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Fall back to dynamic allocation here.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Chen <chensong_2000@189.cn>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250620111215.3365305-1-arnd@kernel.org
Fixes: 4b9091e1c194 ("kernel: trace: preemptirq_delay_test: add cpu affinity")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Freeing of filters requires to wait for both an RCU grace period as well as
a RCU task trace wait period after they have been detached from their
lists. The trace task period can be quite large so the freeing of the
filters was moved to use the call_rcu*() routines. The problem with that is
that the callback functions of call_rcu*() is done from a soft irq and can
cause latencies if the callback takes a bit of time.
The filters are freed per event in a system and the syscalls system
contains an event per system call, which can be over 700 events. Freeing 700
filters in a bottom half is undesirable.
Instead, move the freeing to use queue_rcu_work() which is done in task
context.
Link: https://lore.kernel.org/all/9a2f0cd0-1561-4206-8966-f93ccd25927f@paulmck-laptop/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250609131732.04fd303b@gandalf.local.home
Fixes: a9d0aab5eb33 ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The dedicated cpumask_next_wrap() is more verbose and effective than
cpumask_next() followed by cpumask_first().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250605000651.45281-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The per-CPU data section is handled differently than the other sections.
The memory allocations requires a special __percpu pointer and then the
section is copied into the view of each CPU. Therefore the SHF_ALLOC
flag is removed to ensure move_module() skips it.
Later, relocations are applied and apply_relocations() skips sections
without SHF_ALLOC because they have not been copied. This also skips the
per-CPU data section.
The missing relocations result in a NULL pointer on x86-64 and very
small values on x86-32. This results in a crash because it is not
skipped like NULL pointer would and can't be dereferenced.
Such an assignment happens during static per-CPU lock initialisation
with lockdep enabled.
Allow relocation processing for the per-CPU section even if SHF_ALLOC is
missing.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202506041623.e45e4f7d-lkp@intel.com
Fixes: 1a6100caae425 ("Don't relocate non-allocated regions in modules.") #v2.6.1-rc3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250610163328.URcsSUC1@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250610163328.URcsSUC1@linutronix.de>
|
|
All error conditions in move_module() set the return value by updating the
ret variable. Therefore, it is not necessary to the initialize the variable
when declaring it.
Remove the unnecessary initialization.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250618122730.51324-3-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250618122730.51324-3-petr.pavlu@suse.com>
|
|
The function move_module() uses the variable t to track how many memory
types it has allocated and consequently how many should be freed if an
error occurs.
The variable is initially set to 0 and is updated when a call to
module_memory_alloc() fails. However, move_module() can fail for other
reasons as well, in which case t remains set to 0 and no memory is freed.
Fix the problem by initializing t to MOD_MEM_NUM_TYPES. Additionally, make
the deallocation loop more robust by not relying on the mod_mem_type_t enum
having a signed integer as its underlying type.
Fixes: c7ee8aebf6c0 ("module: add stop-grap sanity check on module memcpy()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250618122730.51324-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250618122730.51324-2-petr.pavlu@suse.com>
|
|
In the preparation stage of CPU online, if the corresponding
the rdp's->nocb_cb_kthread does not exist, will be created,
there is a situation where the rdp's rcuop kthreads creation fails,
and then de-offload this CPU's rdp, does not assign this CPU's
rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and
rdp's->rdp_gp->nocb_gp_kthread is still valid.
This will cause the subsequent re-offload operation of this offline
CPU, which will pass the conditional check and the kthread_unpark()
will access invalid rdp's->nocb_cb_kthread pointer.
This commit therefore use rdp's->nocb_gp_kthread instead of
rdp_gp's->nocb_gp_kthread for safety check.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
It is not possible to send an IPI to a dying CPU that has passed the
CPUHP_TEARDOWN_CPU stage. Remaining unhandled IPIs are handled later at
CPUHP_AP_SMPCFD_DYING stage by stop machine. This is the last
opportunity for RCU exp handler to request an expedited quiescent state.
And the upcoming final context switch between stop machine and idle must
have reported the requested context switch.
Therefore, it should not be possible to observe a pending requested
expedited quiescent state when RCU finally stops watching the outgoing
CPU. Once IPIs aren't possible anymore, the QS for the target CPU will
be reported on its behalf by the RCU exp kworker.
Provide an assertion to verify those expectations.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
A CPU coming online checks for an ongoing grace period and reports
a quiescent state accordingly if needed. This special treatment that
shortcuts the expedited IPI finds its origin as an optimization purpose
on the following commit:
338b0f760e84 (rcu: Better hotplug handling for synchronize_sched_expedited()
The point is to avoid an IPI while waiting for a CPU to become online
or failing to become offline.
However this is pointless and even error prone for several reasons:
* If the CPU has been seen offline in the first round scanning offline
and idle CPUs, no IPI is even tried and the quiescent state is
reported on behalf of the CPU.
* This means that if the IPI fails, the CPU just became offline. So
it's unlikely to become online right away, unless the cpu hotplug
operation failed and rolled back, which is a rare event that can
wait a jiffy for a new IPI to be issued.
* But then the "optimization" applying on failing CPU hotplug down only
applies to !PREEMPT_RCU.
* This force reports a quiescent state even if ->cpu_no_qs.b.exp is not
set. As a result it can race with remote QS reports on the same rdp.
Fortunately it happens to be OK but an accident is waiting to happen.
For all those reasons, remove this optimization that doesn't look worthy
to keep around.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
A full memory barrier in the RCU-PREEMPT task unblock path advertizes
to order the context switch (or rather the accesses prior to
rcu_read_unlock()) with the expedited grace period fastpath.
However the grace period can not complete without the rnp calling into
rcu_report_exp_rnp() with the node locked. This reports the quiescent
state in a fully ordered fashion against updater's accesses thanks to:
1) The READ-SIDE smp_mb__after_unlock_lock() barrier across nodes
locking while propagating QS up to the root.
2) The UPDATE-SIDE smp_mb__after_unlock_lock() barrier while holding the
the root rnp to wait/check for the GP completion.
3) The (perhaps redundant given step 1) and 2)) smp_mb() in rcu_seq_end()
before the grace period completes.
This makes the explicit barrier in this place superfluous. Therefore
remove it as it is confusing.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
The combination of spinlock_t lock and seqcount_spinlock_t seq
in struct fs_struct is an open-coded seqlock_t (see linux/seqlock_types.h).
Combine and switch to equivalent seqlock_t primitives. AFAICS,
that does end up with the same sequence of underlying operations in all
cases.
While we are at it, get_fs_pwd() is open-coded verbatim in
get_path_from_fd(); rather than applying conversion to it, replace with
the call of get_fs_pwd() there. Not worth splitting the commit for that,
IMO...
A bit of historical background - conversion of seqlock_t to
use of seqcount_spinlock_t happened several months after the same
had been done to struct fs_struct; switching fs_struct to seqlock_t
could've been done immediately after that, but it looks like nobody
had gotten around to that until now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250702053437.GC1880847@ZenIV
Acked-by: Ahmed S. Darwish <darwi@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
No logic change, use bpf_copy_to_user() to clean code.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250703163700.677628-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We must terminate the speculative analysis if the just-analyzed insn had
nospec_result set. Using cur_aux() here is wrong because insn_idx might
have been incremented by do_check_insn(). Therefore, introduce and use
insn_aux variable.
Also change cur_aux(env)->nospec in case do_check_insn() ever manages to
increment insn_idx but still fail.
Change the warning to check the insn class (which prevents it from
triggering for ldimm64, for which nospec_result would not be
problematic) and use verifier_bug_if().
In line with Eduard's suggestion, do not introduce prev_aux() because
that requires one to understand that after do_check_insn() call what was
current became previous. This would at-least require a comment.
Fixes: d6f1c85f2253 ("bpf: Fall back to nospec for Spectre v1")
Reported-by: Paul Chaignon <paul.chaignon@gmail.com>
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: syzbot+dc27c5fb8388e38d2d37@syzkaller.appspotmail.com
Link: https://lore.kernel.org/bpf/685b3c1b.050a0220.2303ee.0010.GAE@google.com/
Link: https://lore.kernel.org/bpf/4266fd5de04092aa4971cbef14f1b4b96961f432.camel@gmail.com/
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250705190908.1756862-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On 32-bit platforms, we'll try to convert a u64 directly to a pointer
type which is 32-bit, which causes the compiler to complain about cast
from an integer of a different size to a pointer type. Cast to long
before casting to the pointer type to match the pointer width.
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: d7c431cafcb4 ("bpf: Add dump_stack() analogue to print to BPF stderr")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250705053035.3020320-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We may overrun the bounds because linfo and jited_linfo are already
advanced to prog->aux->linfo_idx, hence we must only iterate the
remaining elements until we reach prog->aux->nr_linfo. Adjust the
nr_linfo calculation to fix this. Reported in [0].
[0]: https://lore.kernel.org/bpf/f3527af3b0620ce36e299e97e7532d2555018de2.camel@gmail.com
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Fixes: 0e521efaf363 ("bpf: Add function to extract program source info")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250705053035.3020320-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow specifying __arg_untrusted for void */char */int */long *
parameters. Treat such parameters as
PTR_TO_MEM|MEM_RDONLY|PTR_UNTRUSTED of size zero.
Intended usage is as follows:
int memcmp(char *a __arg_untrusted, char *b __arg_untrusted, size_t n) {
bpf_for(i, 0, n) {
if (a[i] - b[i]) // load at any offset is allowed
return a[i] - b[i];
}
return 0;
}
Allocate register id for ARG_PTR_TO_MEM parameters only when
PTR_MAYBE_NULL is set. Register id for PTR_TO_MEM is used only to
propagate non-null status after conditionals.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250704230354.1323244-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support for PTR_TO_BTF_ID | PTR_UNTRUSTED global function
parameters. Anything is allowed to pass to such parameters, as these
are read-only and probe read instructions would protect against
invalid memory access.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250704230354.1323244-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When processing a load from a PTR_TO_BTF_ID, the verifier calculates
the type of the loaded structure field based on the load offset.
For example, given the following types:
struct foo {
struct foo *a;
int *b;
} *p;
The verifier would calculate the type of `p->a` as a pointer to
`struct foo`. However, the type of `p->b` is currently calculated as a
SCALAR_VALUE.
This commit updates the logic for processing PTR_TO_BTF_ID to instead
calculate the type of p->b as PTR_TO_MEM|MEM_RDONLY|PTR_UNTRUSTED.
This change allows further dereferencing of such pointers (using probe
memory instructions).
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250704230354.1323244-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Non-functional change:
mark_btf_ld_reg() expects 'reg_type' parameter to be either
SCALAR_VALUE or PTR_TO_BTF_ID. Next commit expands this set, so update
this function to fail if unexpected type is passed. Also update
callers to propagate the error.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250704230354.1323244-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The nreaders and loops variables are exposed as module parameters, which,
in certain combinations, can lead to multiplication overflow.
Besides, loops parameter is defined as long, while through the code is
used as int, which can cause truncation on 64-bit kernels and possible
zeroes where they shouldn't appear.
Since code uses result of multiplication as int anyway, it only makes sense
to replace loops with int. Multiplication overflow check is also added
due to possible multiplication between two very big numbers.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 653ed64b01dc ("refperf: Add a test to measure performance of read-side synchronization")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
When a stall is detected, the state of each NOCB CPU is dumped along
with the state of each NOCB group. The latter part however is
incidentally ignored if the NOCB group leader happens not to be
offloaded itself.
Fix this to make sure related precious informations aren't lost over
a stall report.
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix the calculation of the deadline server task's runtime as this
mishap was preventing realtime tasks from running
- Avoid a race condition during migrate-swapping two tasks
- Fix the string reported for the "none" dynamic preemption option
* tag 'sched_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server runtime calculation formula
sched/core: Fix migrate_swap() vs. hotplug
sched: Fix preemption string of preempt_dynamic_none
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Revert uprobes to using CAP_SYS_ADMIN again as currently they can
destructively modify kernel code from an unprivileged process
- Move a warning to where it belongs
* tag 'perf_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Revert to requiring CAP_SYS_ADMIN for uprobes
perf/core: Fix the WARN_ON_ONCE is out of lock protected region
|
|
Whenever work is enqueued for a remote CPU, smp_call_function_many_cond()
may need to wait for that work to be completed. However, if no work is
enqueued for a remote CPU, because the condition func() evaluated to false
for all CPUs, there is no need to wait.
Set run_remote only if work was enqueued on remote CPUs.
Document the difference between "work enqueued", and "CPU needs to be
woken up"
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Link: https://lore.kernel.org/all/20250703203019.11331ac3@fangorn
|
