summaryrefslogtreecommitdiff
path: root/net/mac80211/ieee80211_i.h
AgeCommit message (Collapse)Author
2025-01-13wifi: mac80211: Support parsing EPCS ML elementIlan Peer
Add support for parsing an ML element of type EPCS priority access, which can optionally be included in EHT protected action frames used to configure EPCS. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.5afdf65cff46.I0ffa30b40fbad47bc5b608b5fd46047a8c44e904@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: Support dynamic link addition and removalIlan Peer
Add support for adding and removing station links: - Adding links is done asynchronously, i.e., first an ML reconfiguration action frame is sent to the AP requesting to add links, and only when the AP replies, links which were added successfully by the AP are added locally. - Removing links is done synchronously, i.e., the links are removed before sending the ML reconfiguration action frame to the AP (to avoid using this links after the AP MLD removed them but before the station got the ML reconfiguration response). In case the AP replies with a status indicating that a link removal was not successful, disconnect (as this should not happen an is an indication that something might be wrong on the AP MLD). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.ec0492a8dd21.I2869686642bbc0f86c40f284ebf7e6f644b551ab@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: verify BSS membership selectors and basic ratesBenjamin Berg
We should not attempt a connection if the BSS we are connecting to requires support for a basic rate or other feature using the BSS membership selector. Add a check verifying this. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250101070249.e58a0f34c798.Ifeb3bfd7b157ffa2ccdb20ca1cba6cf068fd117d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: Remove unused ieee80211_smps_is_restrictiveDr. David Alan Gilbert
The last use of ieee80211_smps_is_restrictive() was removed in 2020 by commit 52b4810bed83 ("mac80211: Remove support for changing AP SMPS mode") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20241226170119.108947-1-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-19Merge tag 'wireless-next-2024-12-19' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 - define wiphy guard - get TX power per link - EHT 320 MHz channel support for mesh ath11k - QCA6698AQ support ath9k - RX inactivity detection rtl8xxxu - add more USB device IDs rtw88 - add more USB device IDs - enable USB RX aggregation and USB 3 to improve performance rtw89 - PowerSave flow for Multi-Link Operation * tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits) wifi: wlcore: sysfs: constify 'struct bin_attribute' wifi: brcmfmac: clarify unmodifiable headroom log message wifi: brcmfmac: add missing header include for brcmf_dbg wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() wifi: qtnfmac: fix spelling error in core.h wifi: rtw89: phy: add dummy C2H event handler for report of TAS power wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read() wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc() wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: destroy workqueue at rtl_deinit_core wifi: rtlwifi: remove unused check_buddy_priv wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2 wifi: rtw89: regd: update regulatory map to R68-R51 wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ wifi: rtw89: disable firmware training HE GI and LTF wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS wifi: rtw89: ps: refactor channel info to firmware before entering PS wifi: rtw89: ps: refactor PS flow to support MLO wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s ... ==================== Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04wifi: mac80211: fix variable used in for_each_sdata_link()Aloka Dixit
Macro for_each_sdata_link() accepts input '_local' but uses 'local' in its processing. This currently works because all the functions calling this macro have declared 'local' as a variable themselves. But this results in compilation error when a new caller uses 'sdata->local' instead of declaring 'local' variable. Use '_local' instead of 'local' in for_each_sdata_link(). Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://patch.msgid.link/20241127180255.1460553-1-quic_alokad@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: fix a queue stall in certain cases of CSAEmmanuel Grumbach
If we got an unprotected action frame with CSA and then we heard the beacon with the CSA IE, we'll block the queues with the CSA reason twice. Since this reason is refcounted, we won't wake up the queues since we wake them up only once and the ref count will never reach 0. This led to blocked queues that prevented any activity (even disconnection wouldn't reset the queue state and the only way to recover would be to reload the kernel module. Fix this by not refcounting the CSA reason. It becomes now pointless to maintain the csa_blocked_queues state. Remove it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 414e090bc41d ("wifi: mac80211: restrict public action ECSA frame handling") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447 Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-13Merge tag 'wireless-next-2024-11-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12wifi: mac80211: Support EHT 1024 aggregation size in TXMeiChia Chiu
Support EHT 1024 aggregation size in TX The 1024 agg size for RX is supported but not for TX. This patch adds this support and refactors common parsing logics for addbaext in both process_addba_resp and process_addba_req into a function. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Reviewed-by: Money Wang <money.wang@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://patch.msgid.link/20241112083846.32063-1-MeiChia.Chiu@mediatek.com [pass elems/len instead of mgmt/len/is_req] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-26wifi: mac80211: ieee80211_i: Fix memory corruption bug in struct ↵Gustavo A. R. Silva
ieee80211_chanctx Move the `struct ieee80211_chanctx_conf conf` to the end of `struct ieee80211_chanctx` and fix a memory corruption bug triggered e.g. in `hwsim_set_chanctx_magic()`: `radar_detected` is being overwritten when `cp->magic = HWSIM_CHANCTX_MAGIC;` See the function call sequence below: drv_add_chanctx(... struct ieee80211_chanctx *ctx) -> local->ops->add_chanctx(&local->hw, &ctx->conf) -> mac80211_hwsim_add_chanctx(... struct ieee80211_chanctx_conf *ctx) -> hwsim_set_chanctx_magic(ctx) This also happens in a number of other drivers. Also, add a code comment to try to prevent people from introducing new members after `struct ieee80211_chanctx_conf conf`. Notice that `struct ieee80211_chanctx_conf` is a flexible structure --a structure that contains a flexible-array member, so it should always be at the end of any other containing structures. This change also fixes 50 of the following warnings: net/mac80211/ieee80211_i.h:895:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] -Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Fixes: bca8bc0399ac ("wifi: mac80211: handle ieee80211_radar_detected() for MLO") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/ZxwWPrncTeSi1UTq@kspp [also refer to other drivers in commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: add support for the monitor SKIP_TX flagFelix Fietkau
Do not pass locally sent packets to monitor interfaces with this flag set. Skip processing tx packets on the status call entirely if no monitor interfaces without this flag are present. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/c327bb57ef8dadaa6a0e8e4dc2f5f99ae8123e6c.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: expose ieee80211_chan_width_to_rx_bw() to driversJohannes Berg
Drivers might need to also do this calculation, no point in them duplicating the code. Since it's so simple, just make it an inline. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.af003cb4a088.I8b5d29504b726caae24af6013c65b3daebe842a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: __ieee80211_recalc_txpower receives a linkEmmanuel Grumbach
Handle the tx power per-link. Don't change the behavior for now. Just change the signature of the function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.3c9cd0731f5b.I6ebfd9d5084f3602b55c55e2669881fd92471c2f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: ieee80211_recalc_txpower receives a linkEmmanuel Grumbach
Handle the tx power per-link. Don't change the behavior for now. Just change the signature of the function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.705bbf953d0a.I8a429dede07bab5801f4c730a6abff7ce23b22d3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: make bss_param_ch_cnt available for the low level driverEmmanuel Grumbach
Drivers may need to track this. Make it available for them, and maintain the value when beacons are received. When link X receives a beacon, iterate the RNR elements and update all the links with their respective data. Track the link id that updated the data so that each link can know whether the update came from its own beacon or from another link. In case, the update came from the link's own beacon, always update the updater link id. The purpose is to let the low level driver know if a link is losing its beacons. If link X is losing its beacons, it can still track the bss_param_ch_cnt and know where the update came from. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.e2d8d1a722ad.I04b883daba2cd48e5730659eb62ca1614c899cbb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: mac80211, cfg80211: miscellaneous spelling fixesDmitry Antipov
Correct spelling here and there as suggested by codespell. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20240913084919.118862-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: mac80211: constify ieee80211_ie_build_{he,eht}_oper() chandefJeff Johnson
The chandef parameter passed to ieee80211_ie_build_he_oper() and ieee80211_ie_build_eht_oper is read-only. Since it is never modified, add the const qualifier to this parameter. This makes these consistent with ieee80211_ie_build_ht_oper() and ieee80211_ie_build_vht_oper(). Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240910-wireless-utils-constify-v1-1-e59947bcb3c3@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: mac80211: Convert color collision detection to wiphy workRemi Pommarel
Call to ieee80211_color_collision_detection_work() needs wiphy lock to be held (see lockdep assert in cfg80211_bss_color_notify()). Not locking wiphy causes the following lockdep error: WARNING: CPU: 2 PID: 42 at net/wireless/nl80211.c:19505 cfg80211_bss_color_notify+0x1a4/0x25c Modules linked in: CPU: 2 PID: 42 Comm: kworker/u8:3 Tainted: G W 6.4.0-02327-g36c6cb260481 #1048 Hardware name: Workqueue: phy1 ieee80211_color_collision_detection_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : cfg80211_bss_color_notify+0x1a4/0x25c lr : cfg80211_bss_color_notify+0x1a0/0x25c sp : ffff000002947d00 x29: ffff000002947d00 x28: ffff800008e1a000 x27: ffff000002bd4705 x26: ffff00000d034000 x25: ffff80000903cf40 x24: 0000000000000000 x23: ffff00000cb70720 x22: 0000000000800000 x21: ffff800008dfb008 x20: 000000000000008d x19: ffff00000d035fa8 x18: 0000000000000010 x17: 0000000000000001 x16: 000003564b1ce96a x15: 000d69696d057970 x14: 000000000000003b x13: 0000000000000001 x12: 0000000000040000 x11: 0000000000000001 x10: ffff80000978f9c0 x9 : ffff0000028d3174 x8 : ffff800008e30000 x7 : 0000000000000000 x6 : 0000000000000028 x5 : 000000000002f498 x4 : ffff00000d034a80 x3 : 0000000000800000 x2 : ffff800016143000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: cfg80211_bss_color_notify+0x1a4/0x25c ieee80211_color_collision_detection_work+0x20/0x118 process_one_work+0x294/0x554 worker_thread+0x70/0x440 kthread+0xf4/0xf8 ret_from_fork+0x10/0x20 irq event stamp: 77372 hardirqs last enabled at (77371): [<ffff800008a346fc>] _raw_spin_unlock_irq+0x2c/0x4c hardirqs last disabled at (77372): [<ffff800008a28754>] el1_dbg+0x20/0x48 softirqs last enabled at (77350): [<ffff8000089e120c>] batadv_send_outstanding_bcast_packet+0xb8/0x120 softirqs last disabled at (77348): [<ffff8000089e11d4>] batadv_send_outstanding_bcast_packet+0x80/0x120 The wiphy lock cannot be taken directly from color collision detection delayed work (ieee80211_color_collision_detection_work()) because this work is cancel_delayed_work_sync() under this wiphy lock causing a potential deadlock( see [0] for details). To fix that ieee80211_color_collision_detection_work() could be converted to a wiphy work and cancel_delayed_work_sync() can be simply replaced by wiphy_delayed_work_cancel() serving the same purpose under wiphy lock. This could potentially fix [1]. [0]: https://lore.kernel.org/linux-wireless/D4A40Q44OAY2.W3SIF6UEPBUN@freebox.fr/ [1]: https://lore.kernel.org/lkml/000000000000612f290618eee3e5@google.com/ Reported-by: Nicolas Escande <nescande@freebox.fr> Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://patch.msgid.link/20240924192805.13859-3-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: mac80211: handle ieee80211_radar_detected() for MLOAditya Kumar Singh
Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06Revert "wifi: mac80211: move radar detect work to sdata"Aditya Kumar Singh
This reverts commit ce9e660ef32e ("wifi: mac80211: move radar detect work to sdata"). To enable radar detection with MLO, it’s essential to handle it on a per-link basis. This is because when using MLO, multiple links may already be active and beaconing. In this scenario, another link should be able to initiate a radar detection. Also, if underlying links are associated with different hardware devices but grouped together for MLO, they could potentially start radar detection simultaneously. Therefore, it makes sense to manage radar detection settings separately for each link by moving them back to a per-link data structure. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: export ieee80211_purge_tx_queue() for driversPing-Ke Shih
Drivers need to purge TX SKB when stopping. Using skb_queue_purge() can't report TX status to mac80211, causing ieee80211_free_ack_frame() warns "Have pending ack frames!". Export ieee80211_purge_tx_queue() for drivers to not have to reimplement it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240822014255.10211-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: refactor block ack management codeDmitry Antipov
Introduce 'ieee80211_mgmt_ba()' to avoid code duplication between 'ieee80211_send_addba_resp()', 'ieee80211_send_addba_request()', and 'ieee80211_send_delba()', ensure that all related addresses are '__aligned(2)', and prefer convenient 'ether_addr_copy()' over generic 'memcpy()'. No functional changes expected. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20240725090925.6022-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-09wifi: mac80211: extend ifcomb check functions for multi-radioFelix Fietkau
Add support for counting global and per-radio max/current number of channels, as well as checking radio-specific interface combinations. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/e76307f8ce562a91a74faab274ae01f6a5ba0a2e.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: update STA/chandef width during switchJohannes Berg
In channel switch without an additional channel context, where the reassign logic kicks in, we also need to update the station bandwidth and chandef minimum width correctly to avoid having station rate control configured to wider bandwidth than the channel context. Do that now. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143418.0bc3d28231b3.I51e76df86212057ca0469e235ba9bf4461cbee75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: optionally pass chandef to ieee80211_sta_cur_vht_bw()Johannes Berg
We'll need this as well for channel switching cases, so add the ability now to pass the chandef to calculate for. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143418.f70e05d9f306.Ifa0ce267de4f0ef3c21d063fb0cbf50e84d7d6ff@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: optionally pass chandef to ieee80211_sta_cap_rx_bw()Johannes Berg
We'll need this function to take a new chandef in (some) channel switching cases, so prepare for that by allowing that to be passed and using it if so. Clean up the code a little bit while at it. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143418.772313f08b6a.If9708249e5870671e745d4c2b02e03b25092bea3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: restrict public action ECSA frame handlingJohannes Berg
Public action extended channel switch announcement (ECSA) frames cannot be protected well, the spec is unclear about what should happen in the presence of stations that can receive protected dual and stations that cannot. Mitigate these issues by not treating public action frames as the absolute truth, only treat them as a hint to stop transmitting (quiet mode), and do the remainder of the CSA handling only when receiving the next beacon (or protected action frame) that contains the CSA; or, if it doesn't, simply stop being quiet and continue operating normally. This limits the exposure to malicious ECSA public action frames, since they cannot cause a disconnect now, only a short interruption in traffic. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143037.ec7ccc45903e.Ife17d55c7ecbf98060f9c52889f3c8ba48798970@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: refactor CSA queue block/unblockJohannes Berg
This code is duplicated many times, refactor it into new separate functions. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143037.1ad22f10392d.If21490c2c67aae28f3c54038363181ee920ce3d1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29wifi: mac80211: handle tasklet frames before stoppingJohannes Berg
The code itself doesn't want to handle frames from the driver if it's already stopped, but if the tasklet was queued before and runs after the stop, then all bets are off. Flush queues before actually stopping, RX should be off at this point since all the interfaces are removed already, etc. Reported-by: syzbot+8830db5d3593b5546d2e@syzkaller.appspotmail.com Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2951b91785617@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: handle HW restart during ROCJohannes Berg
If we have a HW restart in the middle of a ROC period, then there are two cases: - if it's a software ROC, we really don't need to do anything, since the ROC work will still be queued and will run later, albeit with the interruption due to the restart; - if it's a hardware ROC, then it may have begun or not, if it did begin already we can only remove it and tell userspace about that. In both cases, this fixes the warning that would appear in ieee80211_start_next_roc() in this case. In the case of some drivers such as iwlwifi, the part of restarting is never going to happen since the driver will cancel the ROC, but flushing the work to ensure nothing is pending here will also result in no longer being able to trigger the warning in this case. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240523120352.f1924b5411ea.Ifc02a45a5ce23868dc7e428bad8d0e6996dd10f4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: mac80211: handle TPE element during CSAJohannes Berg
Handle the transmit power envelope (TPE) element during channel switch, applying it when the channel switch is done. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506215543.486c33157d18.Idf971ad801b6961c177bdf42cc323fd1a4ca8165@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: mac80211: collect some CSA data into sub-structsJohannes Berg
Collect the CSA data in ieee80211_link_data_managed and ieee80211_link_data into a csa sub-struct to clean up a bit and make adding new things more obvious. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506215543.29f954b1f576.I9a683a9647c33d4dd3011aade6677982428c1082@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: mac80211: mlme: handle cross-link CSAJohannes Berg
If we see a channel switch announcement on one link for another, handle that case and start the CSA. The driver can react to this in whatever way it needs. The stack will have the ability to track it via the RNR/MLE in the reporting link's beacon if it sees it for inactive links and adjust everything accordingly. Note that currently the timings for the CSA aren't set, the values are only used by the Intel drivers, and they don't need this for newer devices that support MLO, so I've left it out for now. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415112355.4d34b6a31be7.Ie8453979f5805873a8411c99346bcc3810cd6476@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: mac80211: move radar detect work to sdataJohannes Berg
At some point we thought perhaps this could be per link, but really that didn't happen, and it's confusing. Radar detection still uses the deflink to allocate the channel, but the work need not be there. Move it back. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506211311.43bd82c6da04.Ib39bec3aa198d137385f081e7e1910dcbde3aa1b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: mac80211: pass parsed TPE data to driversJohannes Berg
Instead of passing the full TPE elements, in all their glory and mixed up data formats for HE backward compatibility, parse them fully into the right values, and pass that to the drivers. Also introduce proper validation already in mac80211, so that drivers don't need to do it, and parse the EHT portions. The code now passes the values in the right order according to the channel used by an interface, which could also be a subset of the data advertised by the AP, if we couldn't connect with the full bandwidth (for whatever reason.) Also add kunit tests for the more complicated bits of it. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211: keep mac80211 consistent on link activation failureBenjamin Berg
In the unlikely event that link_use_channel fails while activating a link, mac80211 would go into a bad state. Unfortunately, we cannot completely avoid failures from drivers in this case. However, what we can do is to just continue internally anyway and assume the driver is going to trigger a recovery flow from its side. Doing that means that we at least have a consistent state in mac80211 allowing such a recovery flow to succeed. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240418115219.1129e89f4b55.I6299678353e50e88b55c99b0bce15c64b52c2804@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211: transmit deauth only if link is availableJohannes Berg
There's an issue in that when we disconnect from an AP due to the AP switching to an unsupported channel, we might not tell the driver about this before we try to send the deauth. If the underlying implementation has detected the quiet CSA, this may cause issues if this is the only active link. Avoid this by transmitting (and flushing) the deauth only when there's an active link available that's not affected by quiet CSA. Since this introduces link->u.mgd.csa_blocked_tx and we no longer check sdata->csa_blocked_tx for the TX itself also rename the latter to csa_blocked_queues. Fixes: 6f0107d195a8 ("wifi: mac80211: introduce a feature flag for quiet in CSA") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415112355.1d91db5e95aa.Iad3a5df3367f305dff48cd61776abfd6cf0fd4ab@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-08wifi: mac80211: correctly document struct mesh_tableJeff Johnson
Currently kernel-doc -Wall reports: net/mac80211/ieee80211_i.h:687: warning: missing initial short description on line: * struct mesh_table So add a short description. Reported-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/linux-wireless/a009a21a-56d7-4a1a-aaf9-feefa5acc561@infradead.org/ Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://msgid.link/20240328-mesh_table-kerneldoc-v1-1-174c4df341b1@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-03Merge tag 'wireless-next-2024-04-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.10 The first "new features" pull request for v6.10 with changes both in stack and in drivers. The big thing in this pull request is that wireless subsystem is now almost free of sparse warnings. There's only one warning left in ath11k which was introduced in v6.9-rc1 and will be fixed via the wireless tree. Realtek drivers continue to improve, now we have support for RTL8922AE and RTL8723CS devices. ath11k also has long waited support for P2P. This time we have a small conflict in iwlwifi, Stephen has an example merge resolution which should help with fixing the conflict: https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/ Major changes: rtw89 * RTL8922AE Wi-Fi 7 PCI device support rtw88 * RTL8723CS SDIO device support iwlwifi * don't support puncturing in 5 GHz * support monitor mode on passive channels * BZ-W device support * P2P with HE/EHT support ath11k * P2P support for QCA6390, WCN6855 and QCA2066 * tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits) wifi: mt76: mt7915: workaround dubious x | !y warning wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask net: rfkill: gpio: Convert to platform remove callback returning void wifi: mac80211: use kvcalloc() for codel vars wifi: iwlwifi: reconfigure TLC during HW restart wifi: iwlwifi: mvm: don't change BA sessions during restart wifi: iwlwifi: mvm: select STA mask only for active links wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9 wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces wifi: iwlwifi: mvm: Remove outdated comment wifi: iwlwifi: add support for BZ_W wifi: iwlwifi: Print a specific device name. wifi: iwlwifi: remove wrong CRF_IDs wifi: iwlwifi: remove devices that never came out wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator wifi: iwlwifi: mvm: fix active link counting during recovery wifi: iwlwifi: mvm: assign link STA ID lookups during restart ... ==================== Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-25wifi: mac80211: reactivate multi-link later in restartJohannes Berg
In case of restart, we currently reactivate multi-link on interfaces before reconfiguring keys etc. which means the drivers need to handle this case differently. Enable more links later to allow them to handle it the same way. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320091155.d0f18a56335d.Ib3338d93872a4a568f38db0d02546534d3eff810@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: mac80211: clarify IEEE80211_STATUS_SUBDATA_MASKJohannes Berg
We have 13 bits for the status_data, so restricting type to 4 and subdata to 8 bits is confusing, even if we don't need more bits now. Change subdata mask to be 9 bits instead, just to make things match up. If we actually need more types or more subdata bits we can later also reshuffle the bits between these, but we should probably keep them at 13 bits together. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320091155.28ac7b665039.I1abbb13e90f016cab552492e05f5cb5b52de6463@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: mac80211: don't enter idle during link switchJohannes Berg
When doing link switch with a disjoint set of links before and after the switch, we end up removing all channel contexts, adding new ones later. This looks like 'idle' to the code now, and we enter idle which also includes flushing queues. But we can't actually flush since we don't have a link active (bound to a channel context), and entering idle just to leave it again is also wrong. Fix this by passing through an indication that we shouldn't do any idle checks in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320091155.170328bac555.If4a522a9dd3133b91983854b909a4de13aa635da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: mac80211: add support for tearing down negotiated TTLMAyala Beker
In order to activate a link that is currently inactive due to a negotiated TTLM request, need to first tear down the negotiated TTLM request. Add support for sending TTLM teardown request and update the links state accordingly. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240318184907.d480cbf46fcf.Idedad472469d2c27dd2a088cf80a13a1e1cf9b78@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: mac80211: fix ieee80211_bss_*_flags kernel-docJeff Johnson
Running kernel-doc on ieee80211_i.h flagged the following: net/mac80211/ieee80211_i.h:145: warning: expecting prototype for enum ieee80211_corrupt_data_flags. Prototype was for enum ieee80211_bss_corrupt_data_flags instead net/mac80211/ieee80211_i.h:162: warning: expecting prototype for enum ieee80211_valid_data_flags. Prototype was for enum ieee80211_bss_valid_data_flags instead Fix these warnings. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://msgid.link/20240314-kdoc-ieee80211_i-v1-1-72b91b55b257@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: remove TDLS peers only on affected linkJohannes Berg
If a link does CSA, or if it changes SMPS mode, we need to drop the TDLS peers, but we really should drop them only on the affected link. Fix that. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://msgid.link/20240228095719.00d1d793f5b8.Ia9971316c6b3922dd371d64ac2198f91ed5ad9d2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: introduce a feature flag for quiet in CSAJohannes Berg
When doing CSA in multi-link, there really isn't a need to stop transmissions entirely. Add a feature flag for drivers to indicate they can handle quiet in CSA (be it by parsing themselves, or by implementing drv_pre_channel_switch()), to make that possible. Also clean up the csa_block_tx handling: it clearly cannot handle multi-link due to the way queues are stopped, move it to the sdata. Drivers should be doing it themselves for working properly during CSA in MLO anyway. Also rename it to indicate that it reflects TX was blocked at mac80211. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228095719.258439191541.I2469d206e2bf5cb244cfde2b4bbc2ae6d1cd3dd9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: hide element parsing internalsJohannes Berg
Rework the data structures to hide element parsing internals from the users. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228094902.19c610b529e2.Ie7ea2dcb6713911590ace6583a4748f32dc37df2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-07-25 23:52:16 +0000