| Age | Commit message (Collapse) | Author |
|---|
|
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So add all skb to
a tmp list, then free them after spin_unlock_irqrestore() at
once.
Fixes: 66ba215cb513 ("neigh: fix possible DoS due to net iface start/stop loop")
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, net.netfilter.nf_conntrack_frag6_high_thresh can only be lowered.
I found this issue while investigating a probable kernel issue
causing flakes in tools/testing/selftests/net/ip_defrag.sh
In particular, these sysctl changes were ignored:
ip netns exec "${NETNS}" sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000 >/dev/null 2>&1
ip netns exec "${NETNS}" sysctl -w net.netfilter.nf_conntrack_frag6_low_thresh=7000000 >/dev/null 2>&1
This change is inline with commit 836196239298 ("net/ipfrag: let ip[6]frag_high_thresh
in ns be higher than in init_net")
Fixes: 8db3d41569bb ("netfilter: nf_defrag_ipv6: use net_generic infra")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214] dump_stack+0xbb/0x107
[47773.890818] print_address_description.constprop.0+0x18/0x140
[47773.892990] kasan_report.cold+0x7c/0xd8
[47773.894459] kasan_check_range+0x145/0x1a0
[47773.895174] down_read+0x99/0x460
[47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372] process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031] kasan_save_stack+0x1b/0x40
[47773.922730] __kasan_kmalloc+0x7a/0x90
[47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207] tcf_action_init_1+0x45b/0x700
[47773.925987] tcf_action_init+0x453/0x6b0
[47773.926692] tcf_exts_validate+0x3d0/0x600
[47773.927419] fl_change+0x757/0x4a51 [cls_flower]
[47773.928227] tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303] kasan_save_stack+0x1b/0x40
[47773.938039] kasan_set_track+0x1c/0x30
[47773.938731] kasan_set_free_info+0x20/0x30
[47773.939467] __kasan_slab_free+0xe7/0x120
[47773.940194] slab_free_freelist_hook+0x86/0x190
[47773.941038] kfree+0xce/0x3a0
[47773.941644] tcf_ct_flow_table_cleanup_work
Original patch description and stack trace by Paul Blakey.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Paul Blakey <paulb@nvidia.com>
Tested-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Expose nf_flow_table_gc_run() to force a garbage collector run from the
offload infrastructure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Update nft_data_init() to report EINVAL if chain is already bound.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Only allow to use this expression from NFPROTO_NETDEV family.
Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As it was originally intended, restrict extension to supported families.
Fixes: b96af92d6eaf ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Error might occur later in the nf_tables_addchain() codepath, enable
static key only after transaction has been created.
Fixes: 9f08ea848117 ("netfilter: nf_tables: keep chain counters away from hot path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Instead report ERANGE if csum_offset is too long, and EOPNOTSUPP if type
is not support.
Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Instead of offset and length are truncation to u8, report ERANGE.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
mutex is per-netns, move table_netns to the pernet area.
*read-write* to 0xffffffff883a01e8 of 8 bytes by task 6542 on cpu 0:
nf_tables_newtable+0x6dc/0xc00 net/netfilter/nf_tables_api.c:1221
nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline]
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline]
nfnetlink_rcv+0xa6a/0x13a0 net/netfilter/nfnetlink.c:652
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x652/0x730 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x643/0x740 net/netlink/af_netlink.c:1921
Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Updates on existing implicit chain make no sense, disallow this.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
TPROXY is only allowed from prerouting, but nft_tproxy doesn't check this.
This fixes a crash (null dereference) when using tproxy from e.g. output.
Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Reported-by: Shell Chen <xierch@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
When a TCP sends more bytes than allowed by the receive window, all future
packets can be marked as invalid.
This can clog up the conntrack table because of 5-day default timeout.
Sequence of packets:
01 initiator > responder: [S], seq 171, win 5840, options [mss 1330,sackOK,TS val 63 ecr 0,nop,wscale 1]
02 responder > initiator: [S.], seq 33211, ack 172, win 65535, options [mss 1460,sackOK,TS val 010 ecr 63,nop,wscale 8]
03 initiator > responder: [.], ack 33212, win 2920, options [nop,nop,TS val 068 ecr 010], length 0
04 initiator > responder: [P.], seq 172:240, ack 33212, win 2920, options [nop,nop,TS val 279 ecr 010], length 68
Window is 5840 starting from 33212 -> 39052.
05 responder > initiator: [.], ack 240, win 256, options [nop,nop,TS val 872 ecr 279], length 0
06 responder > initiator: [.], seq 33212:34530, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318
This is fine, conntrack will flag the connection as having outstanding
data (UNACKED), which lowers the conntrack timeout to 300s.
07 responder > initiator: [.], seq 34530:35848, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318
08 responder > initiator: [.], seq 35848:37166, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318
09 responder > initiator: [.], seq 37166:38484, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318
10 responder > initiator: [.], seq 38484:39802, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318
Packet 10 is already sending more than permitted, but conntrack doesn't
validate this (only seq is tested vs. maxend, not 'seq+len').
38484 is acceptable, but only up to 39052, so this packet should
not have been sent (or only 568 bytes, not 1318).
At this point, connection is still in '300s' mode.
Next packet however will get flagged:
11 responder > initiator: [P.], seq 39802:40128, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 326
nf_ct_proto_6: SEQ is over the upper bound (over the window of the receiver) .. LEN=378 .. SEQ=39802 ACK=240 ACK PSH ..
Now, a couple of replies/acks comes in:
12 initiator > responder: [.], ack 34530, win 4368,
[.. irrelevant acks removed ]
16 initiator > responder: [.], ack 39802, win 8712, options [nop,nop,TS val 296201291 ecr 2982371892], length 0
This ack is significant -- this acks the last packet send by the
responder that conntrack considered valid.
This means that ack == td_end. This will withdraw the
'unacked data' flag, the connection moves back to the 5-day timeout
of established conntracks.
17 initiator > responder: ack 40128, win 10030, ...
This packet is also flagged as invalid.
Because conntrack only updates state based on packets that are
considered valid, packet 11 'did not exist' and that gets us:
nf_ct_proto_6: ACK is over upper bound 39803 (ACKed data not seen yet) .. SEQ=240 ACK=40128 WINDOW=10030 RES=0x00 ACK URG
Because this received and processed by the endpoints, the conntrack entry
remains in a bad state, no packets will ever be considered valid again:
30 responder > initiator: [F.], seq 40432, ack 2045, win 391, ..
31 initiator > responder: [.], ack 40433, win 11348, ..
32 initiator > responder: [F.], seq 2045, ack 40433, win 11348 ..
... all trigger 'ACK is over bound' test and we end up with
non-early-evictable 5-day default timeout.
NB: This patch triggers a bunch of checkpatch warnings because of silly
indent. I will resend the cleanup series linked below to reduce the
indent level once this change has propagated to net-next.
I could route the cleanup via nf but that causes extra backport work for
stable maintainers.
Link: https://lore.kernel.org/netfilter-devel/20220720175228.17880-1-fw@strlen.de/T/#mb1d7147d36294573cc4f81d00f9f8dadfdd06cd8
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Harshit Mogalapalli says:
In ebt_do_table() function dereferencing 'private->hook_entry[hook]'
can lead to NULL pointer dereference. [..] Kernel panic:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[..]
RIP: 0010:ebt_do_table+0x1dc/0x1ce0
Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88
[..]
Call Trace:
nf_hook_slow+0xb1/0x170
__br_forward+0x289/0x730
maybe_deliver+0x24b/0x380
br_flood+0xc6/0x390
br_dev_xmit+0xa2e/0x12c0
For some reason ebtables rejects blobs that provide entry points that are
not supported by the table, but what it should instead reject is the
opposite: blobs that DO NOT provide an entry point supported by the table.
t->valid_hooks is the bitmask of hooks (input, forward ...) that will see
packets. Providing an entry point that is not support is harmless
(never called/used), but the inverse isn't: it results in a crash
because the ebtables traverser doesn't expect a NULL blob for a location
its receiving packets for.
Instead of fixing all the individual checks, do what iptables is doing and
reject all blobs that differ from the expected hooks.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
When a driver returns -EOPNOTSUPP in dsa_port_bridge_join() but failed
to provide a reason for it, DSA attempts to set the extack to say that
software fallback will kick in.
The problem is, when we use brctl and the legacy bridge ioctls, the
extack will be NULL, and DSA dereferences it in the process of setting
it.
Sergei Antonov proves this using the following stack trace:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at dsa_slave_changeupper+0x5c/0x158
dsa_slave_changeupper from raw_notifier_call_chain+0x38/0x6c
raw_notifier_call_chain from __netdev_upper_dev_link+0x198/0x3b4
__netdev_upper_dev_link from netdev_master_upper_dev_link+0x50/0x78
netdev_master_upper_dev_link from br_add_if+0x430/0x7f4
br_add_if from br_ioctl_stub+0x170/0x530
br_ioctl_stub from br_ioctl_call+0x54/0x7c
br_ioctl_call from dev_ifsioc+0x4e0/0x6bc
dev_ifsioc from dev_ioctl+0x2f8/0x758
dev_ioctl from sock_ioctl+0x5f0/0x674
sock_ioctl from sys_ioctl+0x518/0xe40
sys_ioctl from ret_fast_syscall+0x0/0x1c
Fix the problem by only overriding the extack if non-NULL.
Fixes: 1c6e8088d9a7 ("net: dsa: allow port_bridge_join() to override extack message")
Link: https://lore.kernel.org/netdev/CABikg9wx7vB5eRDAYtvAm7fprJ09Ta27a4ZazC=NX5K4wn6pWA@mail.gmail.com/
Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220819173925.3581871-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NFS client fixes from Trond Myklebust:
"Stable fixes:
- NFS: Fix another fsync() issue after a server reboot
Bugfixes:
- NFS: unlink/rmdir shouldn't call d_delete() twice on ENOENT
- NFS: Fix missing unlock in nfs_unlink()
- Add sanity checking of the file type used by __nfs42_ssc_open
- Fix a case where we're failing to set task->tk_rpc_status
Cleanups:
- Remove the NFS_CONTEXT_RESEND_WRITES flag that got obsoleted by the
fsync() fix"
* tag 'nfs-for-5.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: RPC level errors should set task->tk_rpc_status
NFSv4.2 fix problems with __nfs42_ssc_open
NFS: unlink/rmdir shouldn't call d_delete() twice on ENOENT
NFS: Cleanup to remove unused flag NFS_CONTEXT_RESEND_WRITES
NFS: Remove a bogus flag setting in pnfs_write_done_resend_to_mds
NFS: Fix another fsync() issue after a server reboot
NFS: Fix missing unlock in nfs_unlink()
|
|
Commit 3b3fd068c56e3fbea30090859216a368398e39bf added NULL check for
`rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to
check rose_loopback_neigh->loopback.
It thus prevents *all* rose connect.
The reason is that a special rose_neigh loopback has a NULL device.
/proc/net/rose_neigh illustrates it via rose_neigh_show() function :
[...]
seq_printf(seq, "%05d %-9s %-4s %3d %3d %3s %3s %3lu %3lu",
rose_neigh->number,
(rose_neigh->loopback) ? "RSLOOP-0" : ax2asc(buf, &rose_neigh->callsign),
rose_neigh->dev ? rose_neigh->dev->name : "???",
rose_neigh->count,
/proc/net/rose_neigh displays special rose_loopback_neigh->loopback as
callsign RSLOOP-0:
addr callsign dev count use mode restart t0 tf digipeaters
00001 RSLOOP-0 ??? 1 2 DCE yes 0 0
By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called
even in case rose_loopback_neigh->dev is NULL. This repairs rose connections.
Verification with rose client application FPAC:
FPAC-Node v 4.1.3 (built Aug 5 2022) for LINUX (help = h)
F6BVP-4 (Commands = ?) : u
Users - AX.25 Level 2 sessions :
Port Callsign Callsign AX.25 state ROSE state NetRom status
axudp F6BVP-5 -> F6BVP-9 Connected Connected ---------
Fixes: 3b3fd068c56e ("rose: Fix Null pointer dereference in rose_send_frame()")
Signed-off-by: Bernard Pidoux <f6bvp@free.fr>
Suggested-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Thomas DL9SAU Osterried <thomas@osterried.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix up a case in call_encode() where we're failing to set
task->tk_rpc_status when an RPC level error occurred.
Fixes: 9c5948c24869 ("SUNRPC: task should be exit if encode return EKEYEXPIRED more times")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Commit 451ef36bd229 ("ip_tunnels: Add new flow flags field to ip_tunnel_key")
added a "flow_flags" member to struct ip_tunnel_key which was later used by
the commit in the fixes tag to avoid dropping packets with sources that
aren't locally configured when set in bpf_set_tunnel_key().
VXLAN and GENEVE were made to respect this flag, ip tunnels like IPIP and GRE
were not.
This commit fixes this omission by making ip_tunnel_init_flow() receive
the flow flags from the tunnel key in the relevant collect_md paths.
Fixes: b8fff748521c ("bpf: Set flow flag to allow any source IP in bpf_tunnel_key")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Paul Chaignon <paul@isovalent.com>
Link: https://lore.kernel.org/bpf/20220818074118.726639-1-eyal.birger@gmail.com
|
|
When skb->len==0, the recv_actor() returns 0 too, but we also use 0
for error conditions. This patch amends this by propagating the errors
to tcp_read_skb() so that we can distinguish skb->len==0 case from
error cases.
Fixes: 04919bed948d ("tcp: Introduce tcp_read_skb()")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As tcp_read_skb() only reads one skb at a time, the while loop is
unnecessary, we can turn it into an if. This also simplifies the
code logic.
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_cleanup_rbuf() retrieves the skb from sk_receive_queue, it
assumes the skb is not yet dequeued. This is no longer true for
tcp_read_skb() case where we dequeue the skb first.
Fix this by introducing a helper __tcp_cleanup_rbuf() which does
not require any skb and calling it in tcp_read_skb().
Fixes: 04919bed948d ("tcp: Introduce tcp_read_skb()")
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before commit 965b57b469a5 ("net: Introduce a new proto_ops
->read_skb()"), skb was not dequeued from receive queue hence
when we close TCP socket skb can be just flushed synchronously.
After this commit, we have to uncharge skb immediately after being
dequeued, otherwise it is still charged in the original sock. And we
still need to retain skb->sk, as eBPF programs may extract sock
information from skb->sk. Therefore, we have to call
skb_set_owner_sk_safe() here.
Fixes: 965b57b469a5 ("net: Introduce a new proto_ops ->read_skb()")
Reported-and-tested-by: syzbot+a0e6f8738b58f7654417@syzkaller.appspotmail.com
Tested-by: Stanislav Fomichev <sdf@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If construction of the array of policies fails when recording
non-first policy we need to unwind.
netlink_policy_dump_add_policy() itself also needs fixing as
it currently gives up on error without recording the allocated
pointer in the pstate pointer.
Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com
Fixes: 50a896cf2d6f ("genetlink: properly support per-op policy dumping")
Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ds->ops->port_stp_state_set() is, like most DSA methods, optional, and
if absent, the port is supposed to remain in the forwarding state (as
standalone). Such is the case with the mv88e6060 driver, which does not
offload the bridge layer. DSA warns that the STP state can't be changed
to FORWARDING as part of dsa_port_enable_rt(), when in fact it should not.
The error message is also not up to modern standards, so take the
opportunity to make it more descriptive.
Fixes: fd3645413197 ("net: dsa: change scope of STP state setter")
Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220816201445.1809483-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Florian Westphal says:
====================
netfilter: conntrack and nf_tables bug fixes
The following patchset contains netfilter fixes for net.
Broken since 5.19:
A few ancient connection tracking helpers assume TCP packets cannot
exceed 64kb in size, but this isn't the case anymore with 5.19 when
BIG TCP got merged, from myself.
Regressions since 5.19:
1. 'conntrack -E expect' won't display anything because nfnetlink failed
to enable events for expectations, only for normal conntrack events.
2. partially revert change that added resched calls to a function that can
be in atomic context. Both broken and fixed up by myself.
Broken for several releases (up to original merge of nf_tables):
Several fixes for nf_tables control plane, from Pablo.
This fixes up resource leaks in error paths and adds more sanity
checks for mutually exclusive attributes/flags.
Kconfig:
NF_CONNTRACK_PROCFS is very old and doesn't provide all info provided
via ctnetlink, so it should not default to y. From Geert Uytterhoeven.
Selftests:
rework nft_flowtable.sh: it frequently indicated failure; the way it
tried to detect an offload failure did not work reliably.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
testing: selftests: nft_flowtable.sh: rework test to detect offload failure
testing: selftests: nft_flowtable.sh: use random netns names
netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y
netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified
netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END
netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags
netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag
netfilter: nf_tables: really skip inactive sets when allocating name
netfilter: nfnetlink: re-enable conntrack expectation events
netfilter: nf_tables: fix scheduling-while-atomic splat
netfilter: nf_ct_irc: cap packet search space to 4k
netfilter: nf_ct_ftp: prefer skb_linearize
netfilter: nf_ct_h323: cap packet size at 64k
netfilter: nf_ct_sane: remove pseudo skb linearization
netfilter: nf_tables: possible module reference underflow in error path
netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag
netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access
====================
Link: https://lore.kernel.org/r/20220817140015.25843-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix one kernel NULL pointer dereference as below:
[ 224.462334] Call Trace:
[ 224.462394] __tcp_bpf_recvmsg+0xd3/0x380
[ 224.462441] ? sock_has_perm+0x78/0xa0
[ 224.462463] tcp_bpf_recvmsg+0x12e/0x220
[ 224.462494] inet_recvmsg+0x5b/0xd0
[ 224.462534] __sys_recvfrom+0xc8/0x130
[ 224.462574] ? syscall_trace_enter+0x1df/0x2e0
[ 224.462606] ? __do_page_fault+0x2de/0x500
[ 224.462635] __x64_sys_recvfrom+0x24/0x30
[ 224.462660] do_syscall_64+0x5d/0x1d0
[ 224.462709] entry_SYSCALL_64_after_hwframe+0x65/0xca
In commit 9974d37ea75f ("skmsg: Fix invalid last sg check in
sk_msg_recvmsg()"), we change last sg check to sg_is_last(),
but in sockmap redirection case (without stream_parser/stream_verdict/
skb_verdict), we did not mark the end of the scatterlist. Check the
sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all
do not mark the end of sg. They are expected to use sg.end for end
judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here.
Fixes: 9974d37ea75f ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220809094915.150391-1-liujian56@huawei.com
|
|
Even though the normal strparser's init function has a return
value we got away with ignoring errors until now, as it only
validates the parameters and we were passing correct parameters.
tls_strp can fail to init on memory allocation errors, which
syzbot duly induced and reported.
Reported-by: syzbot+abd45eb849b05194b1b6@syzkaller.appspotmail.com
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we try to transmit an skb with metadata_dst attached (i.e. dst->dev
== NULL) through xfrm interface we can hit a null pointer dereference[1]
in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a
loopback skb device when there's no policy which dereferences dst->dev
unconditionally. Not having dst->dev can be interepreted as it not being
a loopback device, so just add a check for a null dst_orig->dev.
With this fix xfrm interface's Tx error counters go up as usual.
[1] net-next calltrace captured via netconsole:
BUG: kernel NULL pointer dereference, address: 00000000000000c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60
Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02
RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80
RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000
R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0
Call Trace:
<TASK>
xfrmi_xmit+0xde/0x460
? tcf_bpf_act+0x13d/0x2a0
dev_hard_start_xmit+0x72/0x1e0
__dev_queue_xmit+0x251/0xd30
ip_finish_output2+0x140/0x550
ip_push_pending_frames+0x56/0x80
raw_sendmsg+0x663/0x10a0
? try_charge_memcg+0x3fd/0x7a0
? __mod_memcg_lruvec_state+0x93/0x110
? sock_sendmsg+0x30/0x40
sock_sendmsg+0x30/0x40
__sys_sendto+0xeb/0x130
? handle_mm_fault+0xae/0x280
? do_user_addr_fault+0x1e7/0x680
? kvm_read_and_reset_apf_flags+0x3b/0x50
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7ff35cac1366
Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366
RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003
RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001
</TASK>
Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole]
CR2: 00000000000000c0
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
NF_CONNTRACK_PROCFS was marked obsolete in commit 54b07dca68557b09
("netfilter: provide config option to disable ancient procfs parts") in
v3.3.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
In the gnet_stats_add_queue_cpu function, the qstats->qlen statistics
are incorrectly set to qcpu->backlog.
Fixes: 448e163f8b9b ("gen_stats: Add gnet_stats_add_queue()")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220815030848.276746-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When bulk delete command is received in the rtnetlink_rcv_msg function,
if bulk delete is not supported, module_put is not called to release
the reference counting. As a result, module reference count is leaked.
Fixes: a6cec0bcd342 ("net: rtnetlink: add bulk delete support flag")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since f3a2181e16f1 ("netfilter: nf_tables: Support for sets with
multiple ranged fields"), it possible to combine intervals and
concatenations. Later on, ef516e8625dd ("netfilter: nf_tables:
reintroduce the NFT_SET_CONCAT flag") provides the NFT_SET_CONCAT flag
for userspace to report that the set stores a concatenation.
Make sure NFT_SET_CONCAT is set on if field_count is specified for
consistency. Otherwise, if NFT_SET_CONCAT is specified with no
field_count, bail out with EINVAL.
Fixes: ef516e8625dd ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
NFT_SET_ELEM_INTERVAL_END
These flags are mutually exclusive, report EINVAL in this case.
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If the NFT_SET_CONCAT|NFT_SET_INTERVAL flags are set on, then the
netlink attribute NFTA_SET_ELEM_KEY_END must be specified. Otherwise,
NFTA_SET_ELEM_KEY_END should not be present.
For catch-all element, NFTA_SET_ELEM_KEY_END should not be present.
The NFT_SET_ELEM_INTERVAL_END is never used with this set flags
combination.
Fixes: 7b225d0b5c6d ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where
packets are corrupted for the second and any further sockets bound to
the same umem. In other words, this does not affect the first socket
bound to the umem. The culprit for this bug is that the initialization
of the DMA addresses for the pre-populated xsk buffer pool entries was
not performed for any socket but the first one bound to the umem. Only
the linear array of DMA addresses was populated. Fix this by populating
the DMA addresses in the xsk buffer pool for every socket bound to the
same umem.
Fixes: 94033cd8e73b8 ("xsk: Optimize for aligned case")
Reported-by: Alasdair McWilliam <alasdair.mcwilliam@outlook.com>
Reported-by: Intrusion Shield Team <dnevil@intrusion.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alasdair McWilliam <alasdair.mcwilliam@outlook.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/xdp-newbies/6205E10C-292E-4995-9D10-409649354226@outlook.com/
Link: https://lore.kernel.org/bpf/20220812113259.531-1-magnus.karlsson@gmail.com
|
|
Follows up on:
https://lore.kernel.org/all/20220809170518.164662-1-cascardo@canonical.com/
handle of 0 implies from/to of universe realm which is not very
sensible.
Lets see what this patch will do:
$sudo tc qdisc add dev $DEV root handle 1:0 prio
//lets manufacture a way to insert handle of 0
$sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 \
route to 0 from 0 classid 1:10 action ok
//gets rejected...
Error: handle of 0 is not valid.
We have an error talking to the kernel, -1
//lets create a legit entry..
sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 route from 10 \
classid 1:10 action ok
//what did the kernel insert?
$sudo tc filter ls dev $DEV parent 1:0
filter protocol ip pref 100 route chain 0
filter protocol ip pref 100 route chain 0 fh 0x000a8000 flowid 1:10 from 10
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
//Lets try to replace that legit entry with a handle of 0
$ sudo tc filter replace dev $DEV parent 1:0 protocol ip prio 100 \
handle 0x000a8000 route to 0 from 0 classid 1:10 action drop
Error: Replacing with handle of 0 is invalid.
We have an error talking to the kernel, -1
And last, lets run Cascardo's POC:
$ ./poc
0
0
-22
-22
-22
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The issue happens on specific paths in the function. After both the
object `rt` and `neigh` are grabbed successfully, when `lifetime` is
nonzero but the metric needs change, the function just deletes the
route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh`
again if above conditions hold. The function simply overwrite `neigh`
if succeeds or returns if fails, without decreasing the reference
count of previous `neigh`. This may result in memory leaks.
Fix it by decrementing the reference count of `neigh` in place.
Fixes: 6b2e04bc240f ("net: allow user to set metric on default route learned via Router Advertisement")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now we have a neigh_param PROXY_QLEN which specifies maximum length
of neigh_table->proxy_queue. But in fact, this limitation doesn't work well
because check condition looks like:
tbl->proxy_queue.qlen > NEIGH_VAR(p, PROXY_QLEN)
The problem is that p (struct neigh_parms) is a per-device thing,
but tbl (struct neigh_table) is a system-wide global thing.
It seems reasonable to make proxy_queue limit per-device based.
v2:
- nothing changed in this patch
v3:
- rebase to net tree
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@kernel.org>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: kernel@openvz.org
Cc: devel@openvz.org
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Normal processing of ARP request (usually this is Ethernet broadcast
packet) coming to the host is looking like the following:
* the packet comes to arp_process() call and is passed through routing
procedure
* the request is put into the queue using pneigh_enqueue() if
corresponding ARP record is not local (common case for container
records on the host)
* the request is processed by timer (within 80 jiffies by default) and
ARP reply is sent from the same arp_process() using
NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED condition (flag is set inside
pneigh_enqueue())
And here the problem comes. Linux kernel calls pneigh_queue_purge()
which destroys the whole queue of ARP requests on ANY network interface
start/stop event through __neigh_ifdown().
This is actually not a problem within the original world as network
interface start/stop was accessible to the host 'root' only, which
could do more destructive things. But the world is changed and there
are Linux containers available. Here container 'root' has an access
to this API and could be considered as untrusted user in the hosting
(container's) world.
Thus there is an attack vector to other containers on node when
container's root will endlessly start/stop interfaces. We have observed
similar situation on a real production node when docker container was
doing such activity and thus other containers on the node become not
accessible.
The patch proposed doing very simple thing. It drops only packets from
the same namespace in the pneigh_queue_purge() where network interface
state change is detected. This is enough to prevent the problem for the
whole node preserving original semantics of the code.
v2:
- do del_timer_sync() if queue is empty after pneigh_queue_purge()
v3:
- rebase to net tree
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@kernel.org>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: kernel@openvz.org
Cc: devel@openvz.org
Investigated-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MHI channel may generates event/interrupt right after enabling.
It may leads to 2 race conditions issues.
1)
Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check:
if (!qdev || mhi_res->transaction_status)
return;
Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at
this moment. In this situation qrtr-ns will be unable to enumerate
services in device.
---------------------------------------------------------------
2)
Such event may come at the moment after dev_set_drvdata() and
before qrtr_endpoint_register(). In this case kernel will panic with
accessing wrong pointer at qcom_mhi_qrtr_dl_callback():
rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr,
mhi_res->bytes_xferd);
Because endpoint is not created yet.
--------------------------------------------------------------
So move mhi_prepare_for_transfer_autoqueue after endpoint creation
to fix it.
Fixes: a2e2cc0dbb11 ("net: qrtr: Start MHI channels during init")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Functions ip6_tnl_change, ip6_tnl_update and ip6_tnl0_update do always
return 0, change the type of functions to void.
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the NFTA_SET_ELEM_OBJREF netlink attribute is present and
NFT_SET_OBJECT flag is set on, report EINVAL.
Move existing sanity check earlier to validate that NFT_SET_OBJECT
requires NFTA_SET_ELEM_OBJREF.
Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The issue happens on some error handling paths. When the function
fails to grab the object `xprt`, it simply returns 0, forgetting to
decrease the reference count of another object `xps`, which is
increased by rpc_sysfs_xprt_kobj_get_xprt_switch(), causing refcount
leaks. Also, the function forgets to check whether `xps` is valid
before using it, which may result in NULL-dereferencing issues.
Fix it by adding proper error handling code when either `xprt` or
`xps` is NULL.
Fixes: 5b7eb78486cd ("SUNRPC: take a xprt offline using sysfs")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The functions clear_bit and set_bit do not imply a memory barrier, thus it
may be possible that the waitqueue_active function (which does not take
any locks) is moved before clear_bit and it could miss a wakeup event.
Fix this bug by adding a memory barrier after clear_bit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning"
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
|
|
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
|
|
While looping to build the bitmap of used anonymous set names, check the
current set in the iteration, instead of the one that is being created.
Fixes: 37a9cc525525 ("netfilter: nf_tables: add generation mask to sets")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
To avoid allocation of the conntrack extension area when possible,
the default behaviour was changed to only allocate the event extension
if a userspace program is subscribed to a notification group.
Problem is that while 'conntrack -E' does enable the event allocation
behind the scenes, 'conntrack -E expect' does not: no expectation events
are delivered unless user sets
"net.netfilter.nf_conntrack_events" back to 1 (always on).
Fix the autodetection to also consider EXP type group.
We need to track the 6 event groups (3+3, new/update/destroy for events and
for expectations each) independently, else we'd disable events again
if an expectation group becomes empty while there is still an active
event group.
Fixes: 2794cdb0b97b ("netfilter: nfnetlink: allow to detect if ctnetlink listeners exist")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
