| Age | Commit message (Collapse) | Author |
|---|
|
Move np->dontfrag flag to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->autoflowlabel and np->autoflowlabel_set in inet->inet_flags,
to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->mc_all to an atomic flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->recverr_rfc4884 to an atomic flag to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add one missing READ_ONCE() annotation in do_ipv6_getsockopt()
and make IPV6_MINHOPCOUNT setsockopt() lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
np->frag_size can be read/written without holding socket lock.
Add missing annotations and make IPV6_MTU setsockopt() lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes data-races around np->mcast_hops,
and make IPV6_MULTICAST_HOPS lockless.
Note that np->mcast_hops is never negative,
thus can fit an u8 field instead of s16.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add inet6_{test|set|clear|assign}_bit() helpers.
Note that I am using bits from inet->inet_flags,
this might change in the future if we need more flags.
While solving data-races accessing np->mc_loop,
this patch also allows to implement lockless accesses
to np->mcast_hops in the following patch.
Also constify sk_mc_loop() argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some np->hop_limit accesses are racy, when socket lock is not held.
Add missing annotations and switch to full lockless implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The 'state->im' value will always be non-zero after
the 'while' statement, so the check can be removed.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230912084100.1502379-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The 'state->im' value will always be non-zero after
the 'while' statement, so the check can be removed.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230912084039.1501984-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
udp->pcflag, udp->pcslen and udp->pcrlen reads/writes are racy.
Move udp->pcflag to udp->udp_flags for atomicity,
and add READ_ONCE()/WRITE_ONCE() annotations for pcslen and pcrlen.
Fixes: ba4e58eca8aa ("[NET]: Supporting UDP-Lite (RFC 3828) in Linux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This flag is set but never read, we can remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot/KCSAN complained about UDP_ENCAP_L2TPINUDP setsockopt() racing.
Add READ_ONCE()/WRITE_ONCE() to document races on this lockless field.
syzbot report was:
BUG: KCSAN: data-race in udp_lib_setsockopt / udp_lib_setsockopt
read-write to 0xffff8881083603fa of 1 bytes by task 16557 on cpu 0:
udp_lib_setsockopt+0x682/0x6c0
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2779
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read-write to 0xffff8881083603fa of 1 bytes by task 16554 on cpu 1:
udp_lib_setsockopt+0x682/0x6c0
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2779
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x05
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16554 Comm: syz-executor.5 Not tainted 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move udp->encap_enabled to udp->udp_flags.
Add udp_test_and_set_bit() helper to allow lockless
udp_tunnel_encap_enable() implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These are read locklessly, move them to udp_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
UDP_ENCAP_ESPINUDP_NON_IKE setsockopt() writes over up->encap_rcv
while other cpus read it.
Fixes: 067b207b281d ("[UDP]: Cleanup UDP encapsulation code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported that udp->gro_enabled can be read locklessly.
Use one atomic bit from udp->udp_flags.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported that udp->no_check6_rx can be read locklessly.
Use one atomic bit from udp->udp_flags.
Fixes: 1c19448c9ba6 ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported that udp->no_check6_tx can be read locklessly.
Use one atomic bit from udp->udp_flags
Fixes: 1c19448c9ba6 ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to syzbot, it is time to use proper atomic flags
for various UDP flags.
Add udp_flags field, and convert udp->corkflag to first
bit in it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720
("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by
updating kcm_tx_msg(head)->last_skb if partial data is copied so that the
following sendmsg() will resume from the skb.
However, we cannot know how many bytes were copied when we get the error.
Thus, we could mess up the MSG_MORE queue.
When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we
do so for UDP by udp_flush_pending_frames().
Even without this change, when the error occurred, the following sendmsg()
resumed from a wrong skb and the queue was messed up. However, we have
yet to get such a report, and only syzkaller stumbled on it. So, this
can be changed safely.
Note this does not change SOCK_SEQPACKET behaviour.
Fixes: c821a88bd720 ("kcm: Fix memory leak in error path of kcm_sendmsg()")
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230912022753.33327-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
POSIX requires to send SIGPIPE on write to SOCK_STREAM socket which was
shutdowned with SHUT_WR flag or its peer was shutdowned with SHUT_RD
flag. Also we must not send SIGPIPE if MSG_NOSIGNAL flag is set.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The value in idx and the number of rules handled in that particular
__nf_tables_dump_rules() call is not identical. The former is a cursor
to pick up from if multiple netlink messages are needed, so its value is
ever increasing. Fixing this is not just a matter of subtracting s_idx
from it, though: When resetting rules in multiple chains,
__nf_tables_dump_rules() is called for each and cb->args[0] is not
adjusted in between. Introduce a dedicated counter to record the number
of rules reset in this call in a less confusing way.
While being at it, prevent the direct return upon buffer exhaustion: Any
rules previously dumped into that skb would evade audit logging
otherwise.
Fixes: 9b5ba5c9c5109 ("netfilter: nf_tables: Unbreak audit log reset")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The size table is incorrect due to copypaste error,
this reserves more size than needed.
TSTAMP reserved 32 instead of 16 bytes.
TIMEOUT reserved 16 instead of 8 bytes.
Fixes: 5f31edc0676b ("netfilter: conntrack: move extension sizes into core")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently, when GETDEVICEINFO returns multiple locations where each
is a different IP but the server's identity is same as MDS, then
nfs4_set_ds_client() finds the existing nfs_client structure which
has the MDS's max_connect value (and if it's 1), then the 1st IP
on the DS's list will get dropped due to MDS trunking rules. Other
IPs would be added as they fall under the pnfs trunking rules.
For the list of IPs the 1st goes thru calling nfs4_set_ds_client()
which will eventually call nfs4_add_trunk() and call into
rpc_clnt_test_and_add_xprt() which has the check for MDS trunking.
The other IPs (after the 1st one), would call rpc_clnt_add_xprt()
which doesn't go thru that check.
nfs4_add_trunk() is called when MDS trunking is happening and it
needs to enforce the usage of max_connect mount option of the
1st mount. However, this shouldn't be applied to pnfs flow.
Instead, this patch proposed to treat MDS=DS as DS trunking and
make sure that MDS's max_connect limit does not apply to the
1st IP returned in the GETDEVICEINFO list. It does so by
marking the newly created client with a new flag NFS_CS_PNFS
which then used to pass max_connect value to use into the
rpc_clnt_test_and_add_xprt() instead of the existing rpc
client's max_connect value set by the MDS connection.
For example, mount was done without max_connect value set
so MDS's rpc client has cl_max_connect=1. Upon calling into
rpc_clnt_test_and_add_xprt() and using rpc client's value,
the caller passes in max_connect value which is previously
been set in the pnfs path (as a part of handling
GETDEVICEINFO list of IPs) in nfs4_set_ds_client().
However, when NFS_CS_PNFS flag is not set and we know we
are doing MDS trunking, comparing a new IP of the same
server, we then set the max_connect value to the
existing MDS's value and pass that into
rpc_clnt_test_and_add_xprt().
Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This reverts commit 0701214cd6e66585a999b132eb72ae0489beb724.
The premise of this commit was incorrect. There are exactly 2 cases
where rpcauth_checkverf() will return an error:
1) If there was an XDR decode problem (i.e. garbage data).
2) If gss_validate() had a problem verifying the RPCSEC_GSS MIC.
In the second case, there are again 2 subcases:
a) The GSS context expires, in which case gss_validate() will force a
new context negotiation on retry by invalidating the cred.
b) The sequence number check failed because an RPC call timed out, and
the client retransmitted the request using a new sequence number,
as required by RFC2203.
In neither subcase is this a fatal error.
Reported-by: Russell Cattelan <cattelan@thebarn.com>
Fixes: 0701214cd6e6 ("SUNRPC: Fail faster on bad verifier")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the server rejects the credential as being stale, or bad, then we
should mark it for revalidation before retransmitting.
Fixes: 7f5667a5f8c4 ("SUNRPC: Clean up rpc_verify_header()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We can get a UBSAN warning if ieee80211_get_tx_power() returns the
INT_MIN value mac80211 internally uses for "unset power level".
UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5
-2147483648 * 100 cannot be represented in type 'int'
CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE
Call Trace:
dump_stack+0x74/0x92
ubsan_epilogue+0x9/0x50
handle_overflow+0x8d/0xd0
__ubsan_handle_mul_overflow+0xe/0x10
nl80211_send_iface+0x688/0x6b0 [cfg80211]
[...]
cfg80211_register_wdev+0x78/0xb0 [cfg80211]
cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211]
[...]
ieee80211_if_add+0x60e/0x8f0 [mac80211]
ieee80211_register_hw+0xda5/0x1170 [mac80211]
In this case, simply return an error instead, to indicate
that no data is available.
Cc: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230203023636.4418-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the driver doesn't fill NL80211_STA_INFO_TX_BITRATE in sta_set_sinfo()
then as a fallback sta->deflink.tx_stats.last_rate is used. Unfortunately
there's no guarantee that this has actually been set before it's used.
Originally found when 'iw <dev> link' would always return a tx rate of
6Mbps regardless of actual link speed for the QCA9337 running firmware
WLAN.TF.2.1-00021-QCARMSWP-1 in my netbook.
Use the sanity check logic from ieee80211_fill_rx_status() and refactor
that to use the new inline function.
Signed-off-by: Stephen Douthit <stephen.douthit@gmail.com>
Link: https://lore.kernel.org/r/20230213204024.3377-1-stephen.douthit@gmail.com
[change to bool ..._rate_valid() instead of int ..._rate_invalid()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use netlink extended ack and parsing policies to return more meaningful
errors instead of the relying solely on errnos.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cfg80211 has cfg80211_chandef_dfs_usable() function to know whether
at least one channel in the chandef is in usable state or not. Also,
cfg80211_chandef_dfs_cac_time() function is there which tells the CAC
time required for the given chandef.
Make these two functions visible to drivers by exporting their symbol
to global list of kernel symbols.
Lower level drivers can make use of these two functions to be aware
if CAC is required on the given chandef and for how long. For example
drivers which maintains the CAC state internally can make use of these.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230912051857.2284-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the channel property updates are not propagated to
driver. This causes issues in the discovery of hidden SSIDs and
fails to connect to them.
This change defines a new wiphy flag which when enabled by vendor
driver, the reg_call_notifier callback will be trigger on beacon
hints. This ensures that the channel property changes are visible
to the vendor driver. The vendor changes the channels for active
scans. This fixes the discovery issue of hidden SSID.
Signed-off-by: Abhishek Kumar <kuabhs@chromium.org>
Link: https://lore.kernel.org/r/20230629035254.1.I059fe585f9f9e896c2d51028ef804d197c8c009e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently regulatory update by driver is not allowed when the
wiphy->regd is already set and drivers_request->intersect is false.
During wiphy registration, some drivers (ath10k does this currently)
first register the world regulatory to cfg80211 using
wiphy_apply_custom_regulatory(). The driver then obtain the current
operating country and tries to update the correct regulatory to
cfg80211 using regulatory_hint().
But at this point, wiphy->regd is already set to world regulatory.
Also, since this is the first request from driver after the world
regulatory is set this will result in drivers_request->intersect
set to false. In this condition the driver request regulatory is not
allowed to update to cfg80211 in reg_set_rd_driver(). This restricts
the device operation to the world regulatory.
This driver request to update the regulatory with current operating
country is valid and should be updated to cfg80211. Hence allow
regulatory update by driver even if the wiphy->regd is already set
and driver_request->intersect is false.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230421061312.13722-1-quic_rajkbhag@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Process FILS discovery and unsolicited broadcast probe response
transmission configurations in ieee80211_change_beacon().
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-6-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
FILS discovery and unsolicited broadcast probe response templates
need to be updated along with beacon templates in some cases such as
the channel switch operation. Add the missing implementation.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-5-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Modify the prototype for change_beacon() in struct cfg80211_op to
accept cfg80211_ap_settings instead of cfg80211_beacon_data so that
it can process data in addition to beacons.
Modify the prototypes of ieee80211_change_beacon() and driver specific
functions accordingly.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-4-quic_alokad@quicinc.com
[while at it, remove pointless "if (info)" check in tracing that just
makes all the lines longer than they need be - it's never NULL]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
FILS discovery configuration gets updated only if the maximum interval
is set to a non-zero value, hence there is no way to reset this value
to 0 once set. Replace the check for interval with a new flag which is
set only if the configuration should be updated.
Add similar changes for the unsolicited broadcast probe response handling.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-3-quic_alokad@quicinc.com
[move NULL'ing to else branch to not have intermediate NULL visible]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new flag 'update' which is set to true during start_ap()
if (and only if) one of the following two conditions are met:
- Userspace passed an empty nested attribute which indicates that
the feature should be disabled and templates deleted.
- Userspace passed all the parameters for the nested attribute.
Existing configuration will not be changed while the flag
remains false.
Add similar changes for unsolicited broadcast probe response
transmission.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-2-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
clang with W=1 reports
net/wireless/lib80211_crypt_tkip.c:667:7: error: variable 'iv32'
set but not used [-Werror,-Wunused-but-set-variable]
u32 iv32 = tkey->tx_iv32;
^
This variable not used so remove it.
Then remove a similar iv16 variable.
Change the comment because the unmodified value is returned.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517123310.873023-1-trix@redhat.com
[change commit log wrt. 'length', add comment in the code]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We really cannot even get into this as we can't have
a BSS with a 5/10 MHz (scan) width, and therefore all
the code handling shifted rates cannot happen. Remove
it all, since it's broken anyway, at least with MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There really isn't any support for scanning at different
channel widths than 20 MHz since there's no way to set it.
Remove this support for now, if somebody wants to maintain
this whole thing later we can revisit how it should work.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since 'sprintf()' returns the number of characters emitted, an
extra calls to 'strlen()' in 'ieee80211_bss()' may be dropped.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20230912035522.15947-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the changed field size was increased to u64, mesh_bss_info_changed
pulls invalid bits from the first 3 bytes of the mesh id, clears them, and
passes them on to ieee80211_link_info_change_notify, because
ifmsh->mbss_changed was not updated to match its size.
Fix this by turning into ifmsh->mbss_changed into an unsigned long array with
64 bit size.
Fixes: 15ddba5f4311 ("wifi: mac80211: consistently use u64 for BSS changes")
Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230913050134.53536-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
xfrm_gen_index() mutual exclusion uses net->xfrm.xfrm_policy_lock.
This means we must use a per-netns idx_generator variable,
instead of a static one.
Alternative would be to use an atomic variable.
syzbot reported:
BUG: KCSAN: data-race in xfrm_sk_policy_insert / xfrm_sk_policy_insert
write to 0xffffffff87005938 of 4 bytes by task 29466 on cpu 0:
xfrm_gen_index net/xfrm/xfrm_policy.c:1385 [inline]
xfrm_sk_policy_insert+0x262/0x640 net/xfrm/xfrm_policy.c:2347
xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639
do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffffffff87005938 of 4 bytes by task 29460 on cpu 1:
xfrm_sk_policy_insert+0x13e/0x640
xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639
do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00006ad8 -> 0x00006b18
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 29460 Comm: syz-executor.1 Not tainted 6.5.0-rc5-syzkaller-00243-g9106536c1aa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Fixes: 1121994c803f ("netns xfrm: policy insertion in netns")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Since bhash2 was introduced, the example below does not work as expected.
These two bind() should conflict, but the 2nd bind() now succeeds.
from socket import *
s1 = socket(AF_INET6, SOCK_STREAM)
s1.bind(('::ffff:127.0.0.1', 0))
s2 = socket(AF_INET, SOCK_STREAM)
s2.bind(('127.0.0.1', s1.getsockname()[1]))
During the 2nd bind() in inet_csk_get_port(), inet_bind2_bucket_find()
fails to find the 1st socket's tb2, so inet_bind2_bucket_create() allocates
a new tb2 for the 2nd socket. Then, we call inet_csk_bind_conflict() that
checks conflicts in the new tb2 by inet_bhash2_conflict(). However, the
new tb2 does not include the 1st socket, thus the bind() finally succeeds.
In this case, inet_bind2_bucket_match() must check if AF_INET6 tb2 has
the conflicting v4-mapped-v6 address so that inet_bind2_bucket_find()
returns the 1st socket's tb2.
Note that if we bind two sockets to 127.0.0.1 and then ::FFFF:127.0.0.1,
the 2nd bind() fails properly for the same reason mentinoed in the previous
commit.
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrei Vagin reported bind() regression with strace logs.
If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4
socket to 127.0.0.1, the 2nd bind() should fail but now succeeds.
from socket import *
s1 = socket(AF_INET6, SOCK_STREAM)
s1.bind(('::ffff:0.0.0.0', 0))
s2 = socket(AF_INET, SOCK_STREAM)
s2.bind(('127.0.0.1', s1.getsockname()[1]))
During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is
AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check
if tb has the v4-mapped-v6 wildcard address.
The example above does not work after commit 5456262d2baa ("net: Fix
incorrect address comparison when searching for a bind2 bucket"), but
the blamed change is not the commit.
Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated
as 0.0.0.0, and the sequence above worked by chance. Technically, this
case has been broken since bhash2 was introduced.
Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0,
the 2nd bind() fails properly because we fall back to using bhash to
detect conflicts for the v4-mapped-v6 address.
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Andrei Vagin <avagin@google.com>
Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
inet_bind2_bucket_match(_addr_any).
This is a prep patch to make the following patches cleaner that touch
inet_bind2_bucket_match() and inet_bind2_bucket_match_addr_any().
Both functions have duplicated comparison for netns, port, and l3mdev.
Let's factorise them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-09-11 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Andrii ensures all VSIs are cleaned up for remove in i40e.
Brett reworks logic for setting promiscuous mode that can, currently, cause
incorrect states on iavf.
---
v2:
- Remove redundant i40e_vsi_free_q_vectors() and kfree() calls (patch 1)
v1: https://lore.kernel.org/netdev/20230905180521.887861-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
