| Age | Commit message (Collapse) | Author |
|---|
|
Drivers that are using ops lock and don't depend on RTNL lock
still need to manage it because udp_tunnel's RTNL dependency.
Introduce new udp_tunnel_nic_lock and use it instead of
rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from
udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to
grab udp_tunnel_nic_lock mutex and might sleep).
Cover more places in v4:
- netlink
- udp_tunnel_notify_add_rx_port (ndo_open)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_notify_del_rx_port (ndo_stop)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_get_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- udp_tunnel_drop_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- udp_tunnel_nic_reset_ntf (ndo_open)
- notifiers
- udp_tunnel_nic_netdevice_event, depending on the event:
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- ethnl_tunnel_info_reply_size
- udp_tunnel_nic_set_port_priv (two intel drivers)
Cc: Michael Chan <michael.chan@broadcom.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a bug with passive TFO sockets returning an invalid NAPI ID 0
from SO_INCOMING_NAPI_ID. Normally this is not an issue, but zero copy
receive relies on a correct NAPI ID to process sockets on the right
queue.
Fix by adding a sk_mark_napi_id_set().
Fixes: e5907459ce7e ("tcp: Record Rx hash and NAPI ID in tcp_child_process")
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250617212102.175711-5-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The reproduction steps:
1. create a tun interface
2. enable l2 bearer
3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun
tipc: Started in network mode
tipc: Node identity 8af312d38a21, cluster identity 4711
tipc: Enabled bearer <eth:syz_tun>, priority 1
Oops: general protection fault
KASAN: null-ptr-deref in range
CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT
Hardware name: QEMU Ubuntu 24.04 PC
RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0
the ub was in fact a struct dev.
when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or
other media when other thread changes it.
fix this by checking media_id.
Fixes: 832629ca5c313 ("tipc: add UDP remoteip dump to netlink API")
Signed-off-by: Haixia Qu <hxqu@hillstonenet.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250617055624.2680-1-hxqu@hillstonenet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The implementation of nla_data is as follows:
static inline void *nla_data(const struct nlattr *nla)
{
return (char *) nla + NLA_HDRLEN;
}
Excluding the case where nla is exactly -NLA_HDRLEN, it will not return
NULL. And it seems misleading to assume that it can, other than in this
corner case. So drop checks for this condition.
Flagged by Smatch.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-nfc-null-data-v1-1-c7525ead2e95@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the following commit from 2024:
commit e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
...there was buggy behavior where TCP connections without SACK support
could easily see erroneous undo events at the end of fast recovery or
RTO recovery episodes. The erroneous undo events could cause those
connections to suffer repeated loss recovery episodes and high
retransmit rates.
The problem was an interaction between the non-SACK behavior on these
connections and the undo logic. The problem is that, for non-SACK
connections at the end of a loss recovery episode, if snd_una ==
high_seq, then tcp_is_non_sack_preventing_reopen() holds steady in
CA_Recovery or CA_Loss, but clears tp->retrans_stamp to 0. Then upon
the next ACK the "tcp: fix to allow timestamp undo if no retransmits
were sent" logic saw the tp->retrans_stamp at 0 and erroneously
concluded that no data was retransmitted, and erroneously performed an
undo of the cwnd reduction, restoring cwnd immediately to the value it
had before loss recovery. This caused an immediate burst of traffic
and build-up of queues and likely another immediate loss recovery
episode.
This commit fixes tcp_packet_delayed() to ignore zero retrans_stamp
values for non-SACK connections when snd_una is at or above high_seq,
because tcp_is_non_sack_preventing_reopen() clears retrans_stamp in
this case, so it's not a valid signal that we can undo.
Note that the commit named in the Fixes footer restored long-present
behavior from roughly 2005-2019, so apparently this bug was present
for a while during that era, and this was simply not caught.
Fixes: e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
Reported-by: Eric Wheeler <netdev@lists.ewheeler.net>
Closes: https://lore.kernel.org/netdev/64ea9333-e7f9-0df-b0f2-8d566143acab@ewheeler.net/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by
atm_account_tx().
It is expected to be reverted by atm_pop_raw() later called by
vcc->dev->ops->send(vcc, skb).
However, vcc_sendmsg() misses the same revert when copy_from_iter_full()
fails, and then we will leak a socket.
Let's factorise the revert part as atm_return_tx() and call it in
the failure path.
Note that the corresponding sk_wmem_alloc operation can be found in
alloc_tx() as of the blamed commit.
$ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts TCP Small Queues implementation from tasklet to BH
workqueue.
Semantically, this is an equivalent conversion and there shouldn't be any
user-visible behavior changes. While workqueue's queueing and execution
paths are a bit heavier than tasklet's, unless the work item is being queued
every packet, the difference hopefully shouldn't matter.
My experience with the networking stack is very limited and this patch
definitely needs attention from someone who actually understands networking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/aFBeJ38AS1ZF3Dq5@slm.duckdns.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As syzbot reported [0], mpls_route_input_rcu() can be called
from mpls_getroute(), where is under RTNL.
net->mpls.platform_label is only updated under RTNL.
Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to
silence the splat.
[0]:
WARNING: suspicious RCU usage
6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted
----------------------------
net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.2.4451/17730:
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline]
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961
stack backtrace:
CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865
mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84
mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381
rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964
netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa98/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmmsg+0x200/0x420 net/socket.c:2709
__do_sys_sendmmsg net/socket.c:2736 [inline]
__se_sys_sendmmsg net/socket.c:2733 [inline]
__x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0a2818e969
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969
RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003
RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268
</TASK>
Fixes: 0189197f4416 ("mpls: Basic routing support")
Reported-by: syzbot+8a583bdd1a5cc0b0e068@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68507981.a70a0220.395abc.01ef.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616201532.1036568-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multicast routing is today handled in the input path. Locally generated MC
packets don't hit the IPMR code today. Thus if a VXLAN remote address is
multicast, the driver needs to set an OIF during route lookup. Thus MC
routing configuration needs to be kept in sync with the VXLAN FDB and MDB.
Ideally, the VXLAN packets would be routed by the MC routing code instead.
To that end, this patch adds support to route locally generated multicast
packets. The newly-added routines do largely what ip6_mr_input() and
ip6_mr_forward() do: make an MR cache lookup to find where to send the
packets, and use ip6_output() to send each of them. When no cache entry is
found, the packet is punted to the daemon for resolution.
Similarly to the IPv4 case in a previous patch, the new logic is contingent
on a newly-added IP6CB flag being set.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/3bcc034a3ab4d3c291072fff38f78d7fbbeef4e6.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some of the work of ip6mr_forward2() is specific to IPMR forwarding, and
should not take place on the output path. In order to allow reuse of the
common parts, extract out of the function a helper,
ip6mr_prepare_forward().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/8932bd5c0fbe3f662b158803b8509604fa7bc113.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nobody uses the return value, so convert the function to void.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/e0bee259da0da58da96647ea9e21e6360c8f7e11.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netfilter hook is invoked with skb->dev for input netdevice, and
vif_dev for output netdevice. However at the point of invocation, skb->dev
is already set to vif_dev, and MR-forwarded packets are reported with
in=out:
# ip6tables -A FORWARD -j LOG --log-prefix '[forw]'
# cd tools/testing/selftests/net/forwarding
# ./router_multicast.sh
# dmesg | fgrep '[forw]'
[ 1670.248245] [forw]IN=v5 OUT=v5 [...]
For reference, IPv4 MR code shows in and out as appropriate.
Fix by caching skb->dev and using the updated value for output netdev.
Fixes: 7bc570c8b4f7 ("[IPV6] MROUTE: Support multicast forwarding.")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/3141ae8386fbe13fef4b793faa75e6bae58d798a.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip6tunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IP6CB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel6_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IPv6 multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/acb4f9f3e40c3a931236c3af08a720b017fbfbfb.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function always returns zero, thus the return value does not carry any
signal. Just make it void.
Most callers already ignore the return value. However:
- Refold arguments of the call from sctp_v6_xmit() so that they fit into
the 80-column limit.
- tipc_udp_xmit() initializes err from the return value, but that should
already be always zero at that point. So there's no practical change, but
elision of the assignment prompts a couple more tweaks to clean up the
function.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/7facacf9d8ca3ca9391a4aee88160913671b868d.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multicast routing is today handled in the input path. Locally generated MC
packets don't hit the IPMR code today. Thus if a VXLAN remote address is
multicast, the driver needs to set an OIF during route lookup. Thus MC
routing configuration needs to be kept in sync with the VXLAN FDB and MDB.
Ideally, the VXLAN packets would be routed by the MC routing code instead.
To that end, this patch adds support to route locally generated multicast
packets. The newly-added routines do largely what ip_mr_input() and
ip_mr_forward() do: make an MR cache lookup to find where to send the
packets, and use ip_mc_output() to send each of them. When no cache entry
is found, the packet is punted to the daemon for resolution.
However, an installation that uses a VXLAN underlay netdevice for which it
also has matching MC routes, would get a different routing with this patch.
Previously, the MC packets would be delivered directly to the underlay
port, whereas now they would be MC-routed. In order to avoid this change in
behavior, introduce an IPCB flag. Only if the flag is set will
ip_mr_output() actually engage, otherwise it reverts to ip_mc_output().
This code is based on work by Roopa Prabhu and Nikolay Aleksandrov.
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0aadbd49330471c0f758d54afb05eb3b6e3a6b65.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some of the work of ipmr_queue_xmit() is specific to IPMR forwarding, and
should not take place on the output path. In order to allow reuse of the
common parts, split the function into two: the ipmr_prepare_xmit() helper
that takes care of the common bits, and the ipmr_queue_fwd_xmit(), which
invokes the former and encapsulates the whole forwarding algorithm.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/4e8db165572a4f8bd29a723a801e854e9d20df4d.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variable is used for caching of rt->dst.dev. The netdevice referenced
therein does not change during the scope of validity of that local. At the
same time, the local is only used twice, and each of these uses will end up
in a different function in the following patches, further eliminating any
use the local could have had.
Drop the local altogether and inline the uses.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/c80600a4b51679fe78f429ccb6d60892c2f9e4de.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for legacy Broadcom FCS tags, which are similar to
DSA_TAG_PROTO_BRCM_LEGACY.
BCM5325 and BCM5365 switches require including the original FCS value and
length, as opposed to BCM63xx switches.
Adding the original FCS value and length to DSA_TAG_PROTO_BRCM_LEGACY would
impact performance of BCM63xx switches, so it's better to create a new tag.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-3-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move brcm_leg_tag_rcv() definition to top.
This function is going to be shared between two different tags.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-2-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we have removed the RFC3517/RFC6675 hints,
tcp_clear_retrans_hints_partial() is empty, and can be removed.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-4-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that obsolete RFC3517/RFC6675 TCP loss detection has been removed,
we can remove the somewhat complex and intrusive code to maintain its
hint state: lost_skb_hint and lost_cnt_hint.
This commit makes tcp_clear_retrans_hints_partial() empty. We will
remove tcp_clear_retrans_hints_partial() and its call sites in the
next commit.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-3-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RACK-TLP loss detection has been enabled as the default loss detection
algorithm for Linux TCP since 2018, in:
commit b38a51fec1c1 ("tcp: disable RFC6675 loss detection")
In case users ran into unexpected bugs or performance regressions,
that commit allowed Linux system administrators to revert to using
RFC3517/RFC6675 loss recovery by setting net.ipv4.tcp_recovery to 0.
In the seven years since 2018, our team has not heard reports of
anyone reverting Linux TCP to use RFC3517/RFC6675 loss recovery, and
we can't find any record in web searches of such a revert.
RACK-TLP was published as a standards-track RFC, RFC8985, in February
2021.
Several other major TCP implementations have default-enabled RACK-TLP
at this point as well.
RACK-TLP offers several significant performance advantages over
RFC3517/RFC6675 loss recovery, including much better performance in
the common cases of tail drops, lost retransmissions, and reordering.
It is now time to remove the obsolete and unused RFC3517/RFC6675 loss
recovery code. This will allow a substantial simplification of the
Linux TCP code base, and removes 12 bytes of state in every tcp_sock
for 64-bit machines (8 bytes on 32-bit machines).
To arrange the commits in reasonable sizes, this patch series is split
into 3 commits. The following 2 commits remove bookkeeping state and
code that is no longer needed after this removal of RFC3517/RFC6675
loss recovery.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-2-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since taprio’s taprio_dev_notifier() isn’t protected by an
RCU read-side critical section, a race with advance_sched()
can lead to a use-after-free.
Adding rcu_read_lock() inside taprio_dev_notifier() prevents this.
Fixes: fed87cc6718a ("net/sched: taprio: automatically calculate queueMaxSDU based on TC gate durations")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/aEzIYYxt0is9upYG@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-06-17
The patch is by Brett Werling, and fixes the power regulator retrieval
during probe of the tcan4x5x glue code for the m_can driver.
* tag 'linux-can-fixes-for-6.16-20250617' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: fix power regulator retrieval during probe
openvswitch: Allocate struct ovs_pcpu_storage dynamically
====================
Link: https://patch.msgid.link/20250617155123.2141584-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_ensure_writable should succeed when it's trying to write to the
header of the unreadable skbs, so it doesn't need an unconditional
skb_frags_readable check. The preceding pskb_may_pull() call will
succeed if write_len is within the head and fail if we're trying to
write to the unreadable payload, so we don't need an additional check.
Removing this check restores DSCP functionality with unreadable skbs as
it's called from dscp_tg.
Cc: willemb@google.com
Cc: asml.silence@gmail.com
Fixes: 65249feb6b3d ("net: add support for skbs with unreadable frags")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615200733.520113-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pavel Begunkov says:
====================
io_uring cmd for tx timestamps (part)
Apply the networking helpers for the io_uring timestamp API.
====================
Link: https://patch.msgid.link/cover.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper function skb_get_tx_timestamp() that returns a tx timestamp
associated with an error queue skb.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/702357dd8936ef4c0d3864441e853bfe3224a677.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Explicitly include <linux/export.h> in files which contain an
EXPORT_SYMBOL().
See commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
PERCPU_MODULE_RESERVE defines the maximum size that can by used for the
per-CPU data size used by modules. This is 8KiB.
Commit 035fcdc4d240c ("openvswitch: Merge three per-CPU structures into
one") restructured the per-CPU memory allocation for the module and
moved the separate alloc_percpu() invocations at module init time to a
static per-CPU variable which is allocated by the module loader.
The size of the per-CPU data section for openvswitch is 6488 bytes which
is ~80% of the available per-CPU memory. Together with a few other
modules it is easy to exhaust the available 8KiB of memory.
Allocate ovs_pcpu_storage dynamically at module init time.
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/all/c401e017-f8db-4f57-a1cd-89beb979a277@nvidia.com
Fixes: 035fcdc4d240c ("openvswitch: Merge three per-CPU structures into one")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250613123629.-XSoQTCu@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There's really no value in the WARN stack trace etc., the reason
for this happening isn't directly related to the calling function
anyway. Also, syzbot has been observing it constantly, and there's
no way we can resolve it there - those systems are just slow.
Instead print an error message (once) and add a comment about what
really causes this message.
Reported-by: syzbot+468656785707b0e995df@syzkaller.appspotmail.com
Reported-by: syzbot+18c783c5cf6a781e3e2c@syzkaller.appspotmail.com
Reported-by: syzbot+d5924d5cffddfccab68e@syzkaller.appspotmail.com
Reported-by: syzbot+7d73d99525d1ff7752ef@syzkaller.appspotmail.com
Reported-by: syzbot+8e6e002c74d1927edaf5@syzkaller.appspotmail.com
Reported-by: syzbot+97254a3b10c541879a65@syzkaller.appspotmail.com
Reported-by: syzbot+dfd1fd46a1960ad9c6ec@syzkaller.appspotmail.com
Reported-by: syzbot+85e0b8d12d9ca877d806@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20250617104902.146e10919be1.I85f352ca4a2dce6f556e5ff45ceaa5f3769cb5ce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In OCB, don't accept frames from invalid source addresses
(and in particular don't try to create stations for them),
drop the frames instead.
Reported-by: syzbot+8b512026a7ec10dcbdd9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6788d2d9.050a0220.20d369.0028.GAE@google.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: syzbot+8b512026a7ec10dcbdd9@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20250616171838.7433379cab5d.I47444d63c72a0bd58d2e2b67bb99e1fea37eec6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This code (tty_get -> vhangup -> tty_put) is repeated on few places.
Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to
handle even vhangup (synchronous).
And use it on those places.
In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup()
depending on a new bool parameter.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend the End.X behavior to accept an output interface as an optional
attribute and make use of it when resolving a route. This is needed when
user space wants to use a link-local address as the nexthop address.
Before:
# ip route add 2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6
# ip route add 2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6
$ ip -6 route show
2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 dev sr6 metric 1024 pref medium
2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6 metric 1024 pref medium
After:
# ip route add 2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6
# ip route add 2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6
$ ip -6 route show
2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6 metric 1024 pref medium
2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6 metric 1024 pref medium
Note that the oif attribute is not dumped to user space when it was not
specified (as an oif of 0) since each entry keeps track of the optional
attributes that it parsed during configuration (see struct
seg6_local_lwt::parsed_optattrs).
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
seg6_lookup_nexthop() is a wrapper around seg6_lookup_any_nexthop().
Change End.X behavior to invoke seg6_lookup_any_nexthop() directly so
that we would not need to expose the new output interface argument
outside of the seg6local module.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
seg6_lookup_any_nexthop() is called by the different endpoint behaviors
(e.g., End, End.X) to resolve an IPv6 route. Extend the function with an
output interface argument so that it could be used to resolve a route
with a certain output interface. This will be used by subsequent patches
that will extend the End.X behavior with an output interface as an
optional argument.
ip6_route_input_lookup() cannot be used when an output interface is
specified as it ignores this parameter. Similarly, calling
ip6_pol_route() when a table ID was not specified (e.g., End.X behavior)
is wrong.
Therefore, when an output interface is specified without a table ID,
resolve the route using ip6_route_output() which will take the output
interface into account.
Note that no endpoint behavior currently passes both a table ID and an
output interface, so the oif argument passed to ip6_pol_route() is
always zero and there are no functional changes in this regard.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move netpoll_print_options() from net/core/netpoll.c to
drivers/net/netconsole.c and make it static. This function is only used
by netconsole, so there's no need to export it or keep it in the public
netpoll API.
This reduces the netpoll API surface and improves code locality
by keeping netconsole-specific functionality within the netconsole
driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-4-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move netpoll_parse_ip_addr() and netpoll_parse_options() from the generic
netpoll module to the netconsole module where they are actually used.
These functions were originally placed in netpoll but are only consumed by
netconsole. This refactoring improves code organization by:
- Removing unnecessary exported symbols from netpoll
- Making netpoll_parse_options() static (no longer needs global visibility)
- Reducing coupling between netpoll and netconsole modules
The functions remain functionally identical - this is purely a code
reorganization to better reflect their actual usage patterns. Here are
the changes:
1) Move both functions from netpoll to netconsole
2) Add static to netpoll_parse_options()
3) Removed the EXPORT_SYMBOL()
PS: This diff does not change the function format, so, it is easy to
review, but, checkpatch will not be happy. A follow-up patch will
address the current issues reported by checkpatch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-3-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move np_info(), np_err(), and np_notice() macros from internal
implementation to the public netpoll header file to make them
available for use by netpoll consumers.
These logging macros provide consistent formatting for netpoll-related
messages by automatically prefixing log output with the netpoll instance
name.
The goal is to use the exact same format that is being displayed today,
instead of creating something netconsole-specific.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-2-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 97714695ef90 ("net: netconsole: Defer netpoll cleanup to
avoid lock release during list traversal"), netconsole no longer uses
__netpoll_cleanup(). With no remaining users, remove this function
from the exported netpoll API.
The function remains available internally within netpoll for use by
netpoll_cleanup().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-1-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phys_port_id_show, phys_port_name_show and phys_switch_id_show would
return -EOPNOTSUPP if the netdev didn't implement the corresponding
method.
There is no point in creating these files if they are unsupported.
Put these attributes in netdev_phys_group and implement the is_visible
method. make phys_(port_id, port_name, switch_id) invisible if the netdev
dosen't implement the corresponding method.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612142707.4644-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace kfree_skb() with kfree_skb_reason() in arp_rcv().
Signed-off-by: Qiu Yutan <qiu.yutan@zte.com.cn>
Signed-off-by: Jiang Kun <jiang.kun2@zte.com.cn>
Link: https://patch.msgid.link/20250612110259698Q2KNNOPQhnIApRskKN3Hi@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on
arm64 with 64KB page:
xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL
In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on
when constructing frags, with 64K page size, the frag data_len could
be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail().
To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel
can test different page size properly. With the kernel change, the user
space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default
value is 17, so for 4K page, the maximum packet size will be less than 68K.
To test 64K page, a bigger maximum packet size than 68K is desired. So two
different functions are implemented for subtest xdp_adjust_frags_tail_grow.
Depending on different page size, different data input/output sizes are used
to adapt with different page size.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In NC-SI spec v1.2 section 8.4.44.2, the firmware name doesn't
need to be null terminated while its size occupies the full size
of the field. Fix the buffer overflow issue by adding one
additional byte for null terminator.
Signed-off-by: Hari Kalavakunta <kalavakunta.hari.prasad@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Link: https://patch.msgid.link/20250610193338.1368-1-kalavakunta.hari.prasad@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While investigating some reports of memory-constrained NUMA machines
failing to mount v3 and v4.0 nfs mounts, we found that svc_init_buffer()
was not attempting to retry allocations from the bulk page allocator.
Typically, this results in a single page allocation being returned and
the mount attempt fails with -ENOMEM. A retry would have allowed the mount
to succeed.
Additionally, it seems that the bulk allocation in svc_init_buffer() is
redundant because svc_alloc_arg() will perform the required allocation and
does the correct thing to retry the allocations.
The call to allocate memory in svc_alloc_arg() drops the preferred node
argument, but I expect we'll still allocate on the preferred node because
the allocation call happens within the svc thread context, which chooses
the node with memory closest to the current thread's execution.
This patch cleans out the bulk allocation in svc_init_buffer() to allow
svc_alloc_arg() to handle the allocation/retry logic for rq_pages.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: ed603bcf4fea ("sunrpc: Replace the rq_pages array with dynamically-allocated memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We mux multiple calls to the drivers via the .get_nfc and .set_nfc
callbacks. This is slightly inconvenient to the drivers as they
have to de-mux them back. It will also be awkward for netlink code
to construct struct ethtool_rxnfc when it wants to get info about
RX Flow Hash, from the RSS module.
Add dedicated driver callbacks. Create struct ethtool_rxfh_fields
which contains only data relevant to RXFH. Maintain the names of
the fields to avoid having to heavily modify the drivers.
For now support both callbacks, once all drivers are converted
ethtool_*et_rxfh_fields() will stop using the rxnfc callbacks.
Link: https://patch.msgid.link/20250611145949.2674086-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RX Flow Hashing supports using different configuration for different
RSS contexts. Only two drivers seem to support it. Make sure we
uniformly error out for drivers which don't.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the handles have been separated - remove the RX Flow Hash
handling from rxnfc functions and vice versa.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RX Flow Hash configuration uses the same argument structure
as flow filters. This is probably why ethtool IOCTL handles
them together. The more checks we add the more convoluted
this code is getting (as some of the checks apply only
to flow filters and others only to the hashing).
Copy the code to separate the handling. This is an exact
copy, the next change will remove unnecessary handling.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
